Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# -*- coding: utf-8 -*-
#
# The Linux Kernel documentation build configuration file, created by
# sphinx-quickstart on Fri Feb 12 13:51:46 2016.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import sys
import os
2016-08-17 00:25:43 +08:00
import sphinx
2019-07-14 18:16:18 +08:00
from subprocess import check_output
2016-08-17 00:25:43 +08:00
# Get Sphinx version
2017-03-20 23:37:49 +08:00
major , minor , patch = sphinx . version_info [ : 3 ]
2016-08-17 00:25:43 +08:00
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
2016-05-20 16:51:47 +08:00
sys . path . insert ( 0 , os . path . abspath ( ' sphinx ' ) )
2016-08-13 22:12:42 +08:00
from load_config import loadConfig
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
2017-08-14 16:53:33 +08:00
needs_sphinx = ' 1.3 '
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
2020-09-05 00:13:45 +08:00
extensions = [ ' kerneldoc ' , ' rstFlatTable ' , ' kernel_include ' ,
2019-10-02 02:25:32 +08:00
' kfigure ' , ' sphinx.ext.ifconfig ' , ' automarkup ' ,
2020-03-20 02:52:01 +08:00
' maintainers_include ' , ' sphinx.ext.autosectionlabel ' ]
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
2020-09-05 00:13:45 +08:00
#
# cdomain is badly broken in Sphinx 3+. Leaving it out generates *most*
# of the docs correctly, but not all. Scream bloody murder but allow
# the process to proceed; hopefully somebody will fix this properly soon.
#
if major > = 3 :
sys . stderr . write ( ''' WARNING: The kernel documentation build process
2020-09-28 15:42:44 +08:00
does not work correctly with Sphinx v3 .0 and above . Expect errors
in the generated output .
''' )
if minor > 0 or patch > = 2 :
# Sphinx c function parser is more pedantic with regards to type
# checking. Due to that, having macros at c:function cause problems.
# Those needed to be scaped by using c_id_attributes[] array
c_id_attributes = [
# GCC Compiler types not parsed by Sphinx:
" __restrict__ " ,
# include/linux/compiler_types.h:
" __iomem " ,
" __kernel " ,
" noinstr " ,
" notrace " ,
" __percpu " ,
" __rcu " ,
" __user " ,
# include/linux/compiler_attributes.h:
" __alias " ,
" __aligned " ,
" __aligned_largest " ,
" __always_inline " ,
" __assume_aligned " ,
" __cold " ,
" __attribute_const__ " ,
" __copy " ,
" __pure " ,
" __designated_init " ,
" __visible " ,
" __printf " ,
" __scanf " ,
" __gnu_inline " ,
" __malloc " ,
" __mode " ,
" __no_caller_saved_registers " ,
" __noclone " ,
" __nonstring " ,
" __noreturn " ,
" __packed " ,
" __pure " ,
" __section " ,
" __always_unused " ,
" __maybe_unused " ,
" __used " ,
" __weak " ,
" noinline " ,
# include/linux/memblock.h:
" __init_memblock " ,
" __meminit " ,
# include/linux/init.h:
" __init " ,
" __ref " ,
# include/linux/linkage.h:
" asmlinkage " ,
]
2020-09-05 00:13:45 +08:00
else :
extensions . append ( ' cdomain ' )
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
The autosectionlabel extension is nice, as it allows to refer to
a section by its name without requiring any extra tag to create
a reference name.
However, on its default, it has two serious problems:
1) the namespace is global. So, two files with different
"introduction" section would create a label with the
same name. This is easily solvable by forcing the extension
to prepend the file name with:
autosectionlabel_prefix_document = True
2) It doesn't work hierarchically. So, if there are two level 1
sessions (let's say, one labeled "open" and another one "ioctl")
and both have a level 2 "synopsis" label, both section 2 will
have the same identical name.
Currently, there's no way to tell Sphinx to create an
hierarchical reference like:
open / synopsis
ioctl / synopsis
This causes around 800 warnings. So, the fix should be to
not let autosectionlabel to produce references for anything
that it is not at a chapter level within any doc, with:
autosectionlabel_maxdepth = 2
Fixes: 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/74f4d8d91c648d7101c45b4b99cc93532f4dadc6.1584716446.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-20 23:11:03 +08:00
# Ensure that autosectionlabel will produce unique names
autosectionlabel_prefix_document = True
autosectionlabel_maxdepth = 2
2016-08-17 00:25:43 +08:00
# The name of the math extension changed on Sphinx 1.4
2019-05-23 04:30:45 +08:00
if ( major == 1 and minor > 3 ) or ( major > 1 ) :
2016-08-17 00:25:43 +08:00
extensions . append ( " sphinx.ext.imgmath " )
else :
extensions . append ( " sphinx.ext.pngmath " )
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Add any paths that contain templates here, relative to this directory.
templates_path = [ ' _templates ' ]
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
# source_suffix = ['.rst', '.md']
source_suffix = ' .rst '
# The encoding of source files.
#source_encoding = 'utf-8-sig'
# The master toctree document.
master_doc = ' index '
# General information about the project.
project = ' The Linux Kernel '
2017-02-07 02:52:19 +08:00
copyright = ' The kernel development community '
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
author = ' The kernel development community '
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
#
2016-05-28 20:25:41 +08:00
# In a normal build, version and release are are set to KERNELVERSION and
# KERNELRELEASE, respectively, from the Makefile via Sphinx command line
# arguments.
#
# The following code tries to extract the information by reading the Makefile,
# when Sphinx is run directly (e.g. by Read the Docs).
try :
makefile_version = None
makefile_patchlevel = None
for line in open ( ' ../Makefile ' ) :
key , val = [ x . strip ( ) for x in line . split ( ' = ' , 2 ) ]
if key == ' VERSION ' :
makefile_version = val
elif key == ' PATCHLEVEL ' :
makefile_patchlevel = val
if makefile_version and makefile_patchlevel :
break
except :
pass
finally :
if makefile_version and makefile_patchlevel :
version = release = makefile_version + ' . ' + makefile_patchlevel
else :
version = release = " unknown version "
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None
# There are two options for replacing |today|: either, you set today to some
# non-false value, then it is used:
#today = ''
# Else, today_fmt is used as the format for a strftime call.
#today_fmt = '%B %d, %Y'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
exclude_patterns = [ ' output ' ]
# The reST default role (used for this markup: `text`) to use for all
# documents.
#default_role = None
# If true, '()' will be appended to :func: etc. cross-reference text.
#add_function_parentheses = True
# If true, the current module name will be prepended to all description
# unit titles (such as .. function::).
#add_module_names = True
# If true, sectionauthor and moduleauthor directives will be shown in the
# output. They are ignored by default.
#show_authors = False
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = ' sphinx '
# A list of ignored prefixes for module index sorting.
#modindex_common_prefix = []
# If true, keep warnings as "system message" paragraphs in the built documents.
#keep_warnings = False
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
2017-03-03 20:24:05 +08:00
primary_domain = ' c '
Documentation/sphinx: set literal block highlight language to none
Set the default highlight language to "none", i.e. do not try to guess
the language and do automatic syntax highlighting on literal blocks.
Eyeballing around the generated documentation, we don't seem to actually
have a lot of literal blocks that would benefit from syntax
highlighting. The C code blocks we do have are typically very short, and
most of the literal blocks are things that shouldn't be highlighted (or,
do not have a pygments lexer). This seems to be true for literal blocks
both in the rst source files and in source code comments.
Not highlighting code is never wrong, but guessing the language wrong
almost invariably leads to silly or confusing highlighting.
At the time of writing, admin-guide/oops-tracing.rst and
admin-guide/ramoops.rst contain good examples of 1) a small C code
snippet not highlighted, 2) a hex dump highligted as who knows what, 3)
device tree block highlighted as C or maybe Python, 4) a terminal
interaction highlighted as code in some language, and finally, 5) some C
code snippets correctly identified as C. I think we're better off
disabling language guessing, and going by explicitly identified
languages for longer code blocks.
It is still possible to enable highlighting on an rst source file basis
using the highlight directive:
.. higlight:: language
and on a literal block basis using the code-block directive:
.. code-block:: language
See http://www.sphinx-doc.org/en/latest/markup/code.html for details.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-11-03 16:26:54 +08:00
highlight_language = ' none '
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
# The Read the Docs theme is available from
# - https://github.com/snide/sphinx_rtd_theme
# - https://pypi.python.org/pypi/sphinx_rtd_theme
# - python-sphinx-rtd-theme package (on Debian)
try :
import sphinx_rtd_theme
html_theme = ' sphinx_rtd_theme '
html_theme_path = [ sphinx_rtd_theme . get_html_theme_path ( ) ]
except ImportError :
sys . stderr . write ( ' Warning: The Sphinx \' sphinx_rtd_theme \' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme. \n ' )
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
#html_theme_options = {}
# Add any paths that contain custom themes here, relative to this directory.
#html_theme_path = []
# The name for this set of Sphinx documents. If None, it defaults to
# "<project> v<release> documentation".
#html_title = None
# A shorter title for the navigation bar. Default is the same as html_title.
#html_short_title = None
# The name of an image file (relative to this directory) to place at the top
# of the sidebar.
#html_logo = None
# The name of an image file (within the static path) to use as favicon of the
# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
#html_favicon = None
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
2016-07-03 16:05:28 +08:00
html_static_path = [ ' sphinx-static ' ]
html_context = {
' css_files ' : [
' _static/theme_overrides.css ' ,
] ,
}
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Add any extra paths that contain custom files (such as robots.txt or
# .htaccess) here, relative to this directory. These files are copied
# directly to the root of the documentation.
#html_extra_path = []
# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
# using the given strftime format.
#html_last_updated_fmt = '%b %d, %Y'
# If true, SmartyPants will be used to convert quotes and dashes to
# typographically correct entities.
2019-06-29 02:38:41 +08:00
html_use_smartypants = False
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Custom sidebar templates, maps document names to template names.
#html_sidebars = {}
# Additional templates that should be rendered to pages, maps page names to
# template names.
#html_additional_pages = {}
# If false, no module index is generated.
#html_domain_indices = True
# If false, no index is generated.
#html_use_index = True
# If true, the index is split into individual pages for each letter.
#html_split_index = False
# If true, links to the reST sources are added to the pages.
#html_show_sourcelink = True
# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
#html_show_sphinx = True
# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
#html_show_copyright = True
# If true, an OpenSearch description file will be output, and all pages will
# contain a <link> tag referring to it. The value of this option must be the
# base URL from which the finished HTML is served.
#html_use_opensearch = ''
# This is the file name suffix for HTML files (e.g. ".xhtml").
#html_file_suffix = None
# Language to be used for generating the HTML full-text search index.
# Sphinx supports the following languages:
# 'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
# 'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr'
#html_search_language = 'en'
# A dictionary with options for the search language support, empty by default.
# Now only 'ja' uses this config value
#html_search_options = {'type': 'default'}
# The name of a javascript file (relative to the configuration directory) that
# implements a search results scorer. If empty, the default will be used.
#html_search_scorer = 'scorer.js'
# Output file base name for HTML help builder.
htmlhelp_basename = ' TheLinuxKerneldoc '
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
2016-08-17 00:25:37 +08:00
' papersize ' : ' a4paper ' ,
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# The font size ('10pt', '11pt' or '12pt').
2018-10-05 09:06:03 +08:00
' pointsize ' : ' 11pt ' ,
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Latex figure (float) alignment
#'figure_align': 'htbp',
2016-08-17 00:25:37 +08:00
2016-08-17 00:25:39 +08:00
# Don't mangle with UTF-8 chars
' inputenc ' : ' ' ,
' utf8extra ' : ' ' ,
2016-08-17 00:25:37 +08:00
# Additional stuff for the LaTeX preamble.
' preamble ' : '''
2017-09-04 03:12:46 +08:00
% Use some font with UTF - 8 support with XeLaTeX
\\usepackage { fontspec }
2018-10-05 09:06:03 +08:00
\\setsansfont { DejaVu Sans }
\\setromanfont { DejaVu Serif }
2017-09-04 03:12:46 +08:00
\\setmonofont { DejaVu Sans Mono }
2019-07-14 18:16:18 +08:00
'''
}
2017-09-04 03:12:46 +08:00
2019-07-14 18:16:18 +08:00
# At least one book (translations) may have Asian characters
# with are only displayed if xeCJK is used
cjk_cmd = check_output ( [ ' fc-list ' , ' --format= " % {family[0]} \n " ' ] ) . decode ( ' utf-8 ' , ' ignore ' )
if cjk_cmd . find ( " Noto Sans CJK SC " ) > = 0 :
print ( " enabling CJK for LaTeX builder " )
latex_elements [ ' preamble ' ] + = '''
2019-07-10 02:14:17 +08:00
% This is needed for translations
\\usepackage { xeCJK }
\\setCJKmainfont { Noto Sans CJK SC }
2017-09-04 03:12:46 +08:00
'''
# Fix reference escape troubles with Sphinx 1.4.x
if major == 1 and minor > 3 :
latex_elements [ ' preamble ' ] + = ' \\ renewcommand* { \\ DUrole}[2] { #2 } \n '
if major == 1 and minor < = 4 :
latex_elements [ ' preamble ' ] + = ' \\ usepackage[margin=0.5in, top=1in, bottom=1in] {geometry} '
elif major == 1 and ( minor > 5 or ( minor == 5 and patch > = 3 ) ) :
latex_elements [ ' sphinxsetup ' ] = ' hmargin=0.5in, vmargin=1in '
latex_elements [ ' preamble ' ] + = ' \\ fvset { fontsize=auto} \n '
# Customize notice background colors on Sphinx < 1.6:
if major == 1 and minor < 6 :
latex_elements [ ' preamble ' ] + = '''
2017-06-19 07:23:52 +08:00
\\usepackage { ifthen }
2016-08-17 00:25:40 +08:00
2016-08-22 02:23:03 +08:00
% Put notes in color and let them be inside a table
\\definecolor { NoteColor } { RGB } { 204 , 255 , 255 }
\\definecolor { WarningColor } { RGB } { 255 , 204 , 204 }
\\definecolor { AttentionColor } { RGB } { 255 , 255 , 204 }
2017-05-12 05:11:01 +08:00
\\definecolor { ImportantColor } { RGB } { 192 , 255 , 204 }
2016-08-22 02:23:03 +08:00
\\definecolor { OtherColor } { RGB } { 204 , 204 , 204 }
2016-08-22 02:23:04 +08:00
\\newlength { \\mynoticelength }
2016-08-22 02:23:03 +08:00
\\makeatletter \\newenvironment { coloredbox } [ 1 ] { %
2016-08-19 20:49:38 +08:00
\\setlength { \\fboxrule } { 1 pt }
\\setlength { \\fboxsep } { 7 pt }
2016-08-22 02:23:04 +08:00
\\setlength { \\mynoticelength } { \\linewidth }
\\addtolength { \\mynoticelength } { - 2 \\fboxsep }
\\addtolength { \\mynoticelength } { - 2 \\fboxrule }
\\begin { lrbox } { \\@tempboxa } \\begin { minipage } { \\mynoticelength } } { \\end { minipage } \\end { lrbox } %
2016-08-22 02:23:03 +08:00
\\ifthenelse %
{ \\equal { \\py @noticetype } { note } } %
{ \\colorbox { NoteColor } { \\usebox { \\@tempboxa } } } %
{ %
\\ifthenelse %
{ \\equal { \\py @noticetype } { warning } } %
{ \\colorbox { WarningColor } { \\usebox { \\@tempboxa } } } %
{ %
\\ifthenelse %
{ \\equal { \\py @noticetype } { attention } } %
{ \\colorbox { AttentionColor } { \\usebox { \\@tempboxa } } } %
2017-05-12 05:11:01 +08:00
{ %
\\ifthenelse %
{ \\equal { \\py @noticetype } { important } } %
{ \\colorbox { ImportantColor } { \\usebox { \\@tempboxa } } } %
{ \\colorbox { OtherColor } { \\usebox { \\@tempboxa } } } %
} %
2016-08-22 02:23:03 +08:00
} %
} %
2016-08-17 00:25:38 +08:00
} \\makeatother
\\makeatletter
2016-08-22 02:23:03 +08:00
\\renewenvironment { notice } [ 2 ] { %
2016-08-17 00:25:38 +08:00
\\def \\py @noticetype { #1}
2016-08-22 02:23:03 +08:00
\\begin { coloredbox } { #1}
\\bf \\it
2016-08-17 00:25:38 +08:00
\\par \\strong { #2}
\\csname py @noticestart @ #1\\endcsname
}
{
\\csname py @noticeend @ \\py @noticetype \\endcsname
2016-08-22 02:23:03 +08:00
\\end { coloredbox }
2016-08-17 00:25:38 +08:00
}
\\makeatother
2016-08-17 00:25:39 +08:00
2016-08-17 00:25:37 +08:00
'''
2016-11-15 00:32:27 +08:00
2017-09-04 03:12:46 +08:00
# With Sphinx 1.6, it is possible to change the Bg color directly
# by using:
# \definecolor{sphinxnoteBgColor}{RGB}{204,255,255}
# \definecolor{sphinxwarningBgColor}{RGB}{255,204,204}
# \definecolor{sphinxattentionBgColor}{RGB}{255,255,204}
# \definecolor{sphinximportantBgColor}{RGB}{192,255,204}
#
# However, it require to use sphinx heavy box with:
#
# \renewenvironment{sphinxlightbox} {%
# \\begin{sphinxheavybox}
# }
# \\end{sphinxheavybox}
# }
#
# Unfortunately, the implementation is buggy: if a note is inside a
# table, it isn't displayed well. So, for now, let's use boring
# black and white notes.
2017-06-19 18:49:06 +08:00
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
2017-05-12 17:02:12 +08:00
# Sorted in alphabetical order
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
latex_documents = [
]
2019-07-09 17:52:36 +08:00
# Add all other index files from Documentation/ subdirectories
for fn in os . listdir ( ' . ' ) :
doc = os . path . join ( fn , " index " )
if os . path . exists ( doc + " .rst " ) :
has = False
for l in latex_documents :
if l [ 0 ] == doc :
has = True
break
if not has :
latex_documents . append ( ( doc , fn + ' .tex ' ,
' Linux %s Documentation ' % fn . capitalize ( ) ,
' The kernel development community ' ,
' manual ' ) )
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
# The name of an image file (relative to this directory) to place at the top of
# the title page.
#latex_logo = None
# For "manual" documents, if this is true, then toplevel headings are parts,
# not chapters.
#latex_use_parts = False
# If true, show page references after internal links.
#latex_show_pagerefs = False
# If true, show URL addresses after external links.
#latex_show_urls = False
# Documents to append as an appendix to all manuals.
#latex_appendices = []
# If false, no module index is generated.
#latex_domain_indices = True
# -- Options for manual page output ---------------------------------------
# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [
( master_doc , ' thelinuxkernel ' , ' The Linux Kernel Documentation ' ,
[ author ] , 1 )
]
# If true, show URL addresses after external links.
#man_show_urls = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
( master_doc , ' TheLinuxKernel ' , ' The Linux Kernel Documentation ' ,
author , ' TheLinuxKernel ' , ' One line description of project. ' ,
' Miscellaneous ' ) ,
]
# Documents to append as an appendix to all manuals.
#texinfo_appendices = []
# If false, no module index is generated.
#texinfo_domain_indices = True
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#texinfo_show_urls = 'footnote'
# If true, do not generate a @detailmenu in the "Top" node's menu.
#texinfo_no_detailmenu = False
# -- Options for Epub output ----------------------------------------------
# Bibliographic Dublin Core info.
epub_title = project
epub_author = author
epub_publisher = author
epub_copyright = copyright
# The basename for the epub file. It defaults to the project name.
#epub_basename = project
# The HTML theme for the epub output. Since the default themes are not
# optimized for small screen space, using the same theme for HTML and epub
# output is usually not wise. This defaults to 'epub', a theme designed to save
# visual space.
#epub_theme = 'epub'
# The language of the text. It defaults to the language option
# or 'en' if the language is not set.
#epub_language = ''
# The scheme of the identifier. Typical schemes are ISBN or URL.
#epub_scheme = ''
# The unique identifier of the text. This can be a ISBN number
# or the project homepage.
#epub_identifier = ''
# A unique identification for the text.
#epub_uid = ''
# A tuple containing the cover image and cover page html template filenames.
#epub_cover = ()
# A sequence of (type, uri, title) tuples for the guide element of content.opf.
#epub_guide = ()
# HTML files that should be inserted before the pages created by sphinx.
# The format is a list of tuples containing the path and title.
#epub_pre_files = []
# HTML files that should be inserted after the pages created by sphinx.
# The format is a list of tuples containing the path and title.
#epub_post_files = []
# A list of files that should not be packed into the epub file.
epub_exclude_files = [ ' search.html ' ]
# The depth of the table of contents in toc.ncx.
#epub_tocdepth = 3
# Allow duplicate toc entries.
#epub_tocdup = True
# Choose between 'default' and 'includehidden'.
#epub_tocscope = 'default'
# Fix unsupported image types using the Pillow.
#epub_fix_images = False
# Scale large images.
#epub_max_image_width = 0
# How to display URL addresses: 'footnote', 'no', or 'inline'.
#epub_show_urls = 'inline'
# If false, no index is generated.
#epub_use_index = True
#=======
# rst2pdf
#
# Grouping the document tree into PDF files. List of tuples
# (source start file, target name, title, author, options).
#
2020-05-26 14:05:44 +08:00
# See the Sphinx chapter of https://ralsina.me/static/manual.pdf
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
#
# FIXME: Do not add the index file here; the result will be too big. Adding
# multiple PDF files here actually tries to get the cross-referencing right
# *between* PDF files.
pdf_documents = [
2016-07-15 18:42:08 +08:00
( ' kernel-documentation ' , u ' Kernel ' , u ' Kernel ' , u ' J. Random Bozo ' ) ,
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 20:14:05 +08:00
]
2016-05-20 16:51:47 +08:00
# kernel-doc extension configuration for running Sphinx directly (e.g. by Read
# the Docs). In a normal build, these are supplied from the Makefile via command
# line arguments.
kerneldoc_bin = ' ../scripts/kernel-doc '
kerneldoc_srctree = ' .. '
2016-08-13 22:12:42 +08:00
# ------------------------------------------------------------------------------
# Since loadConfig overwrites settings from the global namespace, it has to be
# the last statement in the conf.py file
# ------------------------------------------------------------------------------
loadConfig ( globals ( ) )
