hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/powerpc/configs/pseries_defconfig

326 lines
6.8 KiB
Plaintext
Raw Normal View History

[PATCH] powerpc: kill ppc64 rtc.c, use genrtc instead This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 12:49:48 +08:00
CONFIG_PPC64=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-30 14:51:51 +08:00
CONFIG_SMP=y
powerpc/pseries: Double NR_CPUS in defconfig Anticipating growth in coming years, we should ensure we are getting a good lead on testing. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-12 15:47:07 +08:00
CONFIG_NR_CPUS=2048
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigs CONFIG_FHANDLE is a requirement for systemd and with the increasing uptake of systemd within distros it makes sense for 64 bit defconfigs to include it. Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
2014-09-05 09:16:43 +08:00
CONFIG_FHANDLE=y
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 12:19:35 +08:00
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
powerpc: Enable NUMA balancing in pseries[_le]_defconfig Distros are enabling NUMA balancing (eg Ubuntu), so it would be good to get some more test coverage with it. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-21 13:32:07 +08:00
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
task cgroups: enable cgroups by default in some configs In pre-cgroup cpusets, a few config files enabled cpusets by default. Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 14:39:43 +08:00
CONFIG_CGROUPS=y
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 16:39:26 +08:00
CONFIG_CGROUP_FREEZER=y
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
CONFIG_CGROUP_DEVICE=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_CPUSETS=y
[POWERPC] Update defconfigs This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 13:53:35 +08:00
CONFIG_CGROUP_CPUACCT=y
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_USER_NS=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 12:19:35 +08:00
CONFIG_BLK_DEV_INITRD=y
[POWERPC] Update some defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20 08:21:32 +08:00
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
powerpc: Enable jump label support When looking through some instruction traces I noticed our tracepoint checks were inline. It turns out we don't have CONFIG_JUMP_LABEL enabled. By enabling CONFIG_JUMP_LABEL we replace a load/compare/branch with a nop at every tracepoint call. For example in do_IRQ: CONFIG_JUMP_LABEL disabled: stdx 3,11,9 lwz 0,8(29) cmpwi 7,0,0 bne- 7,.L124 bl .irq_enter CONFIG_JUMP_LABEL enabled: stdx 3,11,9 nop bl .irq_enter Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-23 01:58:41 +08:00
CONFIG_JUMP_LABEL=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig We need devtmpfs enabled to boot on recent versions of Fedora. EFI partitions will be useful for large block devices. tmpfs ACL support is used by some distros for managing access to devices. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:34:53 +08:00
CONFIG_PARTITION_ADVANCED=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 12:19:35 +08:00
CONFIG_PPC_SPLPAR=y
CONFIG_SCANLOG=m
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 11:31:55 +08:00
CONFIG_PPC_SMLPAR=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_DTL=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
# CONFIG_PPC_PMAC is not set
[PATCH] powerpc: kill ppc64 rtc.c, use genrtc instead This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 12:49:48 +08:00
CONFIG_RTAS_FLASH=m
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_IBMEBUS=y
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 14:36:53 +08:00
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
powerpc/defconfigs: Set HZ=100 on pseries and ppc64 defconfigs Now we have high res timers there is less of a reason for a high HZ value. Furthermore I think there a few reasons we should reduce HZ to 100: - Timer interrupt overhead. While this overhead is small, there are applications that are very sensitive to jitter (eg some HPC apps). - Issues with the timer wheel code. When coming out of NO_HZ idle we work our way through the timer code one tick at a time. If we have been idle a long time, this adds up - I sometimes see milliseconds of time spent in that loop. Long term we should fix the timer wheel algorithm, but for now if we reduce HZ then we reduce the amount of work the timer code has to do when coming out of idle. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-07 01:48:33 +08:00
CONFIG_HZ_100=y
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_BINFMT_MISC=m
powerpc: Add transactional memory to pseries and ppc64 defconfigs Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-14 00:21:44 +08:00
CONFIG_PPC_TRANSACTIONAL_MEM=y
[PATCH] powerpc: kill ppc64 rtc.c, use genrtc instead This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 12:49:48 +08:00
CONFIG_KEXEC=y
[PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-15 11:40:25 +08:00
CONFIG_IRQ_ALL_CPUS=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
powerpc: Enable KSM on pseries and ppc64 defconfigs KSM will only be used on areas marked for merging via madvise, and it is showing nice improvements on KVM workloads, so enable it by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:22 +08:00
CONFIG_KSM=y
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 14:36:53 +08:00
CONFIG_TRANSPARENT_HUGEPAGE=y
powerpc: Enable 64kB pages and 1024 threads in pseries config - Enable 64kB pages so it gets some regular testing. - The largest POWER7 has 1024 threads so bump NR_CPUS it to match. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-12 10:14:32 +08:00
CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SCHED_SMT=y
PCI: hotplug: Convert to be builtin only, not modular Convert CONFIG_HOTPLUG_PCI from tristate to bool. This only affects the hotplug core; several of the hotplug drivers can still be modules. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-07-25 01:36:31 +08:00
CONFIG_HOTPLUG_PCI=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
powerpc: Set CONFIG_NET=y in defconfigs Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23 23:44:02 +08:00
CONFIG_NET=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) Our netfilter options are stale and important things like masquerading are no longer enabled. Instead of trying to keep up with any updates, set CONFIG_NETFILTER_ADVANCED=n on ppc64* and pseries* defconfigs. This enables the most common netfilter modules for us. While here, enable the network bridge module which is heavily used in KVM setups. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-03-16 12:04:32 +08:00
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_VLAN_8021Q=m
[POWERPC] Update defconfigs This updates all the defconfigs in arch/powerpc/configs except iseries and ps3, which were updated by the preceding commits. This mostly takes the defaults, except that I turned on tickless idle and high-resolution timers for everything, and turned off instrumentation support and "Fair group CPU scheduler" for the smaller/embedded platforms. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 13:53:35 +08:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig We need devtmpfs enabled to boot on recent versions of Fedora. EFI partitions will be useful for large block devices. tmpfs ACL support is used by some distros for managing access to devices. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:34:53 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
powerpc: Enable virtio on ppc64 and pseries configs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:46:15 +08:00
CONFIG_VIRTIO_BLK=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_FC_ATTRS=y
powerpc/pseries: Enable iSCSI support for a number of cards Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-08 21:19:30 +08:00
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
powerpc: Add mpt2sas driver to pseries and ppc64 defconfig Add mpt2sas driver to pseries and ppc64 defconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-07-06 21:13:16 +08:00
CONFIG_SCSI_MPT2SAS=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SCSI_IBMVSCSI=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 11:31:55 +08:00
CONFIG_SCSI_IBMVFC=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_IPR=y
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_SCSI_QLA_FC=m
powerpc/pseries: Enable iSCSI support for a number of cards Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-08 21:19:30 +08:00
CONFIG_SCSI_QLA_ISCSI=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SCSI_LPFC=m
powerpc: Enable virtio on ppc64 and pseries configs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:46:15 +08:00
CONFIG_SCSI_VIRTIO=m
powerpc/configs: Re-enable CONFIG_SCSI_DH Commit 086b91d052eb ("scsi_dh: integrate into the core SCSI code") changed CONFIG_SCSI_DH from tristate to bool. Our defconfigs have CONFIG_SCSI_DH=m, which the kconfig machinery warns us is invalid, but instead of converting it to =y it leaves it unset. This means we loose the CONFIG_SCSI_DH code and everything that depends on it. So convert the values in the defconfigs to =y. Fixes: 086b91d052eb ("scsi_dh: integrate into the core SCSI code") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-29 18:14:41 +08:00
CONFIG_SCSI_DH=y
powerpc: Enable multipath modules on ppc64 and pseries Enable a few modules required to boot on a POWER multipath box. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:45:31 +08:00
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 19:39:24 +08:00
CONFIG_ATA=y
powerpc: Enable CONFIG_SATA_AHCI on pseries and ppc64 defconfigs We are starting to see ppc64 boxes with SATA AHCI adapters in it, so enable it in our defconfigs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:21 +08:00
CONFIG_SATA_AHCI=y
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
# CONFIG_ATA_SFF is not set
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_MD_RAID456=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_DM_THIN_PROVISIONING=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
powerpc: Enable multipath modules on ppc64 and pseries Enable a few modules required to boot on a POWER multipath box. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:45:31 +08:00
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_BONDING=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_DUMMY=m
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_NETCONSOLE=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_TUN=m
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_VETH=m
powerpc: Enable virtio on ppc64 and pseries configs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:46:15 +08:00
CONFIG_VIRTIO_NET=m
powerpc: sync ppc64, ppc64e and pseries configs Run savedefconfig over the ppc64, ppc64e and pseries config Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:44:50 +08:00
CONFIG_VHOST_NET=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_VORTEX=y
powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-07 01:45:09 +08:00
CONFIG_ACENIC=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_ACENIC_OMIT_TIGON_I=y
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_PCNET32=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_TIGON3=y
powerpc/config: Enable bnx2x on ppc64 and pseries defconfigs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-13 13:13:18 +08:00
CONFIG_BNX2X=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_CHELSIO_T1=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_BE2NET=m
CONFIG_S2IO=m
CONFIG_IBMVETH=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 11:31:55 +08:00
CONFIG_EHEA=y
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_IXGB=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_IXGBE=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_MLX4_EN=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_MYRI10GE=m
powerpc/pseries: Enable Emulex and Qlogic 10Gbit cards Enable the Qlogic and Emulex 10Gbit adapters. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-08 21:18:27 +08:00
CONFIG_QLGE=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_NETXEN_NIC=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_PPP_DEFLATE=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_PPPOE=m
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_INPUT_EVDEV=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_SERIO_SERPORT is not set
powerpc: Enable various container features on pseries defconfigs. Enable config options required by lxc and docker. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:24 +08:00
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_ICOM=m
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_SERIAL_JSM=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_HVC_CONSOLE=y
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_HVC_RTAS=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_HVCS=m
powerpc: Enable virtio on ppc64 and pseries configs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:46:15 +08:00
CONFIG_VIRTIO_CONSOLE=m
powerpc: Add driver for Barrier Synchronization Register Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-08 13:45:11 +08:00
CONFIG_IBM_BSR=m
powerpc/pseries: enable RTC class support A working rtc kernel driver is needed so that hwclock can synchronize system clock to rtc during shutdown/boot. We already have a powernv platform rtc driver located at drivers/rtc/rtc-opal.c. However it depends on CONFIG_RTC_CLASS which is disabled by default. Hence the driver isn't enabled and not compiled for the powernv kernel. We fix this by enabling rtc class support in pseries defconfig which enables this driver and compiles it into the pseries kernel. In case CONFIG_PPC_POWERNV is not enabled we fallback to 'Generic RTC support' driver which emulates the legacy 'PC RTC driver'. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-07-03 13:11:20 +08:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_GENERIC=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=1024
CONFIG_FB=y
[POWERPC] Update defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-26 12:19:35 +08:00
CONFIG_FIRMWARE_EDID=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_FB_OF=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_RADEON=y
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 19:39:24 +08:00
CONFIG_FB_IBM_GXT4500=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 11:31:55 +08:00
CONFIG_LCD_PLATFORM=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 16:39:26 +08:00
CONFIG_HID_GYRATION=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SUNPLUS=y
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_USB_HIDDEV=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_USB=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_USB_MON=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_USB_EHCI_HCD=y
[POWERPC] Update some defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20 08:21:32 +08:00
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_USB_OHCI_HCD=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_USB_STORAGE=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_INFINIBAND=m
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_INFINIBAND_MTHCA=m
[POWERPC] Update defconfigs Mostly took the defaults, except tried to get the netfilter options more or less as they were before. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 19:39:24 +08:00
CONFIG_INFINIBAND_EHCA=m
powerpc/pseries: Enable Chelsio network and iWARP drivers Ensure the Chelsio T3/T4 network drivers and iWARP drivers are enabled in the pseries config. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-05 10:00:26 +08:00
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB4=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_MLX4_INFINIBAND=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_INFINIBAND_IPOIB=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_INFINIBAND_IPOIB_CM=y
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_INFINIBAND_SRP=m
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_INFINIBAND_ISER=m
powerpc: Enable virtio on ppc64 and pseries configs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:46:15 +08:00
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 16:39:26 +08:00
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
[POWERPC] Update pseries defconfig pseries defconfig updates: - Enable jsm and re-enable qlogic FC drivers as modules. - Enable ocfs2, autofs4 and fuse filesystems as modules. - Enable Kprobes. - Enable ebus, binfmt_misc, sas attrs, md5 reshape, hvc rtas backend and some infiniband options. - Finally disable debug options: DEBUG_MUTEXES and DEBUG_STACK_USAGE. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:37:24 +08:00
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
powerpc: Enable overlayfs on pseries and ppc64 defconfigs Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 07:24:23 +08:00
CONFIG_OVERLAY_FS=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_ISO9660_FS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
powerpc: Enable devtmpfs, EFI partition support and tmpfs ACLs on pseries, ppc64 and ppc64e defconfig We need devtmpfs enabled to boot on recent versions of Fedora. EFI partitions will be useful for large block devices. tmpfs ACL support is used by some distros for managing access to devices. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:34:53 +08:00
CONFIG_TMPFS_POSIX_ACL=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_HUGETLBFS=y
powerpc/defconfigs: Reduce 64bit vmlinux by making acenic and cramfs modules Machines with acenic adapters are rare these days, so we may as well make it a module. Cramfs is also very rarely used so we can make it a module. Together this saves 143kB on a 64bit compile: text data bss dec hex filename 8247176 1729404 1221988 11198568 aae068 vmlinux~ 8134997 1727588 1188836 11051421 a8a19d vmlinux Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-07 01:45:09 +08:00
CONFIG_CRAMFS=m
powerpc: Enable squashfs as a module Most distros use it so we may as well enable it and get regular compile testing. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-30 08:38:20 +08:00
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
powerpc/pseries: Enable PSTORE in pseries_defconfig Since now we have pstore support for nvram in pseries, enable it in the default config. With this config option enabled, pstore infra-structure will be used to read/write the messages from/to nvram. Signed-off-by: Aruna Balakrishnaiah <aruna@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-24 14:53:00 +08:00
CONFIG_PSTORE=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_NFSD=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfig Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17 and RHEL6) as well as the x86 defconfigs. Userspace these days is most likely to expect utf8 anyway. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:33:55 +08:00
CONFIG_NLS_DEFAULT="utf8"
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
powerpc: Cleanup NLS config options on pseries, ppc64 and ppc64e defconfig Set CONFIG_NLS_DEFAULT to utf8. The distros do this (eg ppc64 FC17 and RHEL6) as well as the x86 defconfigs. Userspace these days is most likely to expect utf8 anyway. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:33:55 +08:00
CONFIG_NLS_UTF8=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_MAGIC_SYSRQ=y
[PATCH] powerpc: Update {g5,pseries,ppc64}_defconfig Update defconfigs for g5, pseries and generic ppc64. Default choices for everything, with the following exceptions: * Enable WINDFARM_PM112 on g5 and ppc64. * Increase CONFIG_NR_CPUS to 4 in g5_defconfig * CONFIG_TIGON3=y instead of =m in g5_defconfig Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-13 07:30:31 +08:00
CONFIG_DEBUG_KERNEL=y
powerpc: Run savedefconfig over pseries, ppc64 and ppc64e defconfig No changes, just update the configs with savedefconfig. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-12-12 22:32:40 +08:00
CONFIG_DEBUG_STACK_USAGE=y
powerpc: sync ppc64, ppc64e and pseries configs Run savedefconfig over the ppc64, ppc64e and pseries config Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-22 08:44:50 +08:00
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LOCKUP_DETECTOR=y
powerpc: Update defconfigs for most non-embedded platforms Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-26 11:31:55 +08:00
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
powerpc: Trim defconfigs This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 09:19:16 +08:00
CONFIG_BLK_DEV_IO_TRACE=y
powerpc: Reduce differences between pseries and ppc64 defconfigs The pseries and ppc64 defconfigs have drifted apart over the years. Reduce some of the differences while still keeping the idea that the ppc64 defconfig is cross platform but enables fewer features than pseries, eg NR_CPUS is lower. Also enable a number of common adapters as modules. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-07 20:26:28 +08:00
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_XMON=y
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_CRYPTO_HMAC=y
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
CONFIG_CRYPTO_MICHAEL_MIC=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_CRYPTO_TGR192=m
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
powerpc: Copy default configs into arch/powerpc/configs Copy default configs into arch/powerpc/configs, rename bpa_defconfig to cell_defconfig while we're at it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 12:24:57 +08:00
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
[POWERPC] Update some defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20 08:21:32 +08:00
CONFIG_CRYPTO_SALSA20=m
[POWERPC] Update defconfigs for desktop/server systems Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 18:04:12 +08:00
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
[POWERPC] Update some defconfigs Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-20 08:21:32 +08:00
CONFIG_CRYPTO_LZO=m
powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-11 16:39:26 +08:00
# CONFIG_CRYPTO_ANSI_CPRNG is not set
powerpc/crypto: rework Kconfig This patch creates a new submenu for the NX cryptographic hardware accelerator and breaks the NX options into their own Kconfig file under drivers/crypto/nx/Kconfig. This will permit additional NX functionality to be easily and more cleanly added in the future without touching drivers/crypto/Makefile|Kconfig. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-07-19 22:42:38 +08:00
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
powerpc: Add KVM as module to defconfigs Add HV mode KVM to Book3 server 64bit defconfigs as a module. Doesn't add much to the size: text data bss dec hex filename 8244109 4686767 994000 13924876 d47a0c vmlinux.vanilla 8256092 4691607 994128 13941827 d4bc43 vmlinux.kvm This should enable more testing of this configuration. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-07 22:49:13 +08:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
powerpc: Update all configs using savedefconfig It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20 14:36:53 +08:00
CONFIG_KVM_BOOK3S_64_HV=m
powerpc/powernv: Enable LEDS support Commit 84ad6e5c added LEDS support for PowerNV platform. Lets update ppc64_defconfig to pick LEDS driver. PowerNV LEDS driver looks for "/ibm,opal/leds" node in device tree and loads if this node exists. Hence added it as 'm'. Also note that powernv LEDS driver needs NEW_LEDS and LEDS_CLASS as well. Hence added them to config file. mpe: Also add them to pseries_defconfig, which is currently also used for powernv systems. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-27 14:04:10 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_POWERNV=m