linux-sg2042/kernel/irq/chip.c

776 lines
19 KiB
C
Raw Normal View History

/*
* linux/kernel/irq/chip.c
*
* Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
* Copyright (C) 2005-2006, Thomas Gleixner, Russell King
*
* This file contains the core interrupt handling code, for irq-chip
* based architectures.
*
* Detailed information is available in Documentation/DocBook/genericirq
*/
#include <linux/irq.h>
#include <linux/msi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <trace/events/irq.h>
#include "internals.h"
/**
* irq_set_chip - set the irq chip for an irq
* @irq: irq number
* @chip: pointer to irq chip description structure
*/
int irq_set_chip(unsigned int irq, struct irq_chip *chip)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
if (!chip)
chip = &no_irq_chip;
desc->irq_data.chip = chip;
irq_put_desc_unlock(desc, flags);
/*
* For !CONFIG_SPARSE_IRQ make the irq show up in
* allocated_irqs. For the CONFIG_SPARSE_IRQ case, it is
* already marked, and this call is harmless.
*/
irq_reserve_irq(irq);
return 0;
}
EXPORT_SYMBOL(irq_set_chip);
/**
* irq_set_type - set the irq trigger type for an irq
* @irq: irq number
* @type: IRQ_TYPE_{LEVEL,EDGE}_* value - see include/linux/irq.h
*/
int irq_set_irq_type(unsigned int irq, unsigned int type)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
return -EINVAL;
type &= IRQ_TYPE_SENSE_MASK;
genirq: Fix long-term regression in genirq irq_set_irq_type() handling In 2008, commit 0c5d1eb77a8be ("genirq: record trigger type") modified the way set_irq_type() handles the 'no trigger' condition. However, this has an adverse effect on PCMCIA support on Intel StrongARM and probably PXA platforms. PCMCIA has several status signals on the socket which can trigger interrupts; some of these status signals depend on the card's mode (whether it is configured in memory or IO mode). For example, cards have a 'Ready/IRQ' signal: in memory mode, this provides an indication to PCMCIA that the card has finished its power up initialization. In IO mode, it provides the device interrupt signal. Other status signals switch between on-board battery status and loud speaker output. In classical PCMCIA implementations, where you have a specific socket controller, the controller provides a method to mask interrupts from the socket, and importantly ignore any state transitions on the pins which correspond with interrupts once masked. This masking prevents unwanted events caused by the removal and application of socket power being forwarded. However, on platforms where there is no socket controller, the PCMCIA status and interrupt signals are routed to standard edge-triggered GPIOs. These GPIOs can be configured to interrupt on rising edge, falling edge, or never. This is where the problems start. Edge triggered interrupts are required to record events while disabled via the usual methods of {free,request,disable,enable}_irq() to prevent problems with dropped interrupts (eg, the 8390 driver uses disable_irq() to defer the delivery of interrupts). As a result, these interfaces can not be used to implement the desired behaviour. The side effect of this is that if the 'Ready/IRQ' GPIO is disabled via disable_irq() on suspend, and enabled via enable_irq() after resume, we will record the state transitions caused by powering events as valid interrupts, and foward them to the card driver, which may attempt to access a card which is not powered up. This leads delays resume while drivers spin in their interrupt handlers, and complaints from drivers before they realize what's happened. Moreover, in the case of the 'Ready/IRQ' signal, this is requested and freed by the card driver itself; the PCMCIA core has no idea whether the interrupt is requested, and, therefore, whether a call to disable_irq() would be valid. (We tried this around 2.4.17 / 2.5.1 kernel era, and ended up throwing it out because of this problem.) Therefore, it was decided back in around 2002 to disable the edge triggering instead, resulting in all state transitions on the GPIO being ignored. That's what we actually need the hardware to do. The commit above changes this behaviour; it explicitly prevents the 'no trigger' state being selected. The reason that request_irq() does not accept the 'no trigger' state is for compatibility with existing drivers which do not provide their desired triggering configuration. The set_irq_type() function is 'new' and not used by non-trigger aware drivers. Therefore, revert this change, and restore previously working platforms back to their former state. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux@arm.linux.org.uk Cc: Ingo Molnar <mingo@elte.hu> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-06 07:07:25 +08:00
ret = __irq_set_trigger(desc, irq, type);
irq_put_desc_busunlock(desc, flags);
return ret;
}
EXPORT_SYMBOL(irq_set_irq_type);
/**
* irq_set_handler_data - set irq handler data for an irq
* @irq: Interrupt number
* @data: Pointer to interrupt specific data
*
* Set the hardware irq controller data for an irq
*/
int irq_set_handler_data(unsigned int irq, void *data)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
desc->irq_data.handler_data = data;
irq_put_desc_unlock(desc, flags);
return 0;
}
EXPORT_SYMBOL(irq_set_handler_data);
/**
* irq_set_msi_desc_off - set MSI descriptor data for an irq at offset
* @irq_base: Interrupt number base
* @irq_offset: Interrupt number offset
* @entry: Pointer to MSI descriptor data
*
* Set the MSI descriptor entry for an irq at offset
*/
int irq_set_msi_desc_off(unsigned int irq_base, unsigned int irq_offset,
struct msi_desc *entry)
{
unsigned long flags;
struct irq_desc *desc = irq_get_desc_lock(irq_base + irq_offset, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
desc->irq_data.msi_desc = entry;
if (entry && !irq_offset)
entry->irq = irq_base;
irq_put_desc_unlock(desc, flags);
return 0;
}
/**
* irq_set_msi_desc - set MSI descriptor data for an irq
* @irq: Interrupt number
* @entry: Pointer to MSI descriptor data
*
* Set the MSI descriptor entry for an irq
*/
int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
{
return irq_set_msi_desc_off(irq, 0, entry);
}
/**
* irq_set_chip_data - set irq chip data for an irq
* @irq: Interrupt number
* @data: Pointer to chip specific data
*
* Set the hardware irq chip data for an irq
*/
int irq_set_chip_data(unsigned int irq, void *data)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
desc->irq_data.chip_data = data;
irq_put_desc_unlock(desc, flags);
return 0;
}
EXPORT_SYMBOL(irq_set_chip_data);
struct irq_data *irq_get_irq_data(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
return desc ? &desc->irq_data : NULL;
}
EXPORT_SYMBOL_GPL(irq_get_irq_data);
static void irq_state_clr_disabled(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_DISABLED);
}
static void irq_state_set_disabled(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_DISABLED);
}
static void irq_state_clr_masked(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_MASKED);
}
static void irq_state_set_masked(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
}
int irq_startup(struct irq_desc *desc, bool resend)
{
int ret = 0;
irq_state_clr_disabled(desc);
desc->depth = 0;
if (desc->irq_data.chip->irq_startup) {
ret = desc->irq_data.chip->irq_startup(&desc->irq_data);
irq_state_clr_masked(desc);
} else {
irq_enable(desc);
}
if (resend)
check_irq_resend(desc, desc->irq_data.irq);
return ret;
}
void irq_shutdown(struct irq_desc *desc)
{
irq_state_set_disabled(desc);
desc->depth = 1;
if (desc->irq_data.chip->irq_shutdown)
desc->irq_data.chip->irq_shutdown(&desc->irq_data);
else if (desc->irq_data.chip->irq_disable)
desc->irq_data.chip->irq_disable(&desc->irq_data);
else
desc->irq_data.chip->irq_mask(&desc->irq_data);
irq_state_set_masked(desc);
}
void irq_enable(struct irq_desc *desc)
{
irq_state_clr_disabled(desc);
if (desc->irq_data.chip->irq_enable)
desc->irq_data.chip->irq_enable(&desc->irq_data);
else
desc->irq_data.chip->irq_unmask(&desc->irq_data);
irq_state_clr_masked(desc);
}
void irq_disable(struct irq_desc *desc)
{
irq_state_set_disabled(desc);
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
}
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
{
if (desc->irq_data.chip->irq_enable)
desc->irq_data.chip->irq_enable(&desc->irq_data);
else
desc->irq_data.chip->irq_unmask(&desc->irq_data);
cpumask_set_cpu(cpu, desc->percpu_enabled);
}
void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
{
if (desc->irq_data.chip->irq_disable)
desc->irq_data.chip->irq_disable(&desc->irq_data);
else
desc->irq_data.chip->irq_mask(&desc->irq_data);
cpumask_clear_cpu(cpu, desc->percpu_enabled);
}
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
desc->irq_data.chip->irq_mask_ack(&desc->irq_data);
else {
desc->irq_data.chip->irq_mask(&desc->irq_data);
if (desc->irq_data.chip->irq_ack)
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
irq_state_set_masked(desc);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
}
void mask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
{
if (desc->irq_data.chip->irq_mask) {
desc->irq_data.chip->irq_mask(&desc->irq_data);
irq_state_set_masked(desc);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
}
}
void unmask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
{
if (desc->irq_data.chip->irq_unmask) {
desc->irq_data.chip->irq_unmask(&desc->irq_data);
irq_state_clr_masked(desc);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-10 02:45:54 +08:00
}
}
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
/*
* handle_nested_irq - Handle a nested irq from a irq thread
* @irq: the interrupt number
*
* Handle interrupts which are nested into a threaded interrupt
* handler. The handler function is called inside the calling
* threads context.
*/
void handle_nested_irq(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action;
irqreturn_t action_ret;
might_sleep();
raw_spin_lock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
kstat_incr_irqs_this_cpu(irq, desc);
action = desc->action;
if (unlikely(!action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
goto out_unlock;
}
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
action_ret = action->thread_fn(action->irq, action->dev_id);
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
raw_spin_lock_irq(&desc->lock);
irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
out_unlock:
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 19:21:38 +08:00
}
EXPORT_SYMBOL_GPL(handle_nested_irq);
static bool irq_check_poll(struct irq_desc *desc)
{
if (!(desc->istate & IRQS_POLL_INPROGRESS))
return false;
return irq_wait_for_poll(desc);
}
/**
* handle_simple_irq - Simple and software-decoded IRQs.
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Simple interrupts are either sent from a demultiplexing interrupt
* handler or come from hardware, where no interrupt hardware control
* is necessary.
*
* Note: The caller is expected to handle the ack, clear, mask and
* unmask issues if necessary.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_simple_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
if (unlikely(irqd_irq_inprogress(&desc->irq_data)))
if (!irq_check_poll(desc))
goto out_unlock;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
goto out_unlock;
}
handle_irq_event(desc);
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_simple_irq);
/*
* Called unconditionally from handle_level_irq() and only for oneshot
* interrupts from handle_fasteoi_irq()
*/
static void cond_unmask_irq(struct irq_desc *desc)
{
/*
* We need to unmask in the following cases:
* - Standard level irq (IRQF_ONESHOT is not set)
* - Oneshot irq which did not wake the thread (caused by a
* spurious interrupt or a primary handler handling it
* completely).
*/
if (!irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot)
unmask_irq(desc);
}
/**
* handle_level_irq - Level type irq handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Level type interrupts are active as long as the hardware line has
* the active level. This may require to mask the interrupt and unmask
* it after the associated handler has acknowledged the device, so the
* interrupt line is back to inactive.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_level_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
mask_ack_irq(desc);
if (unlikely(irqd_irq_inprogress(&desc->irq_data)))
if (!irq_check_poll(desc))
goto out_unlock;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
/*
* If its disabled or no action available
* keep it masked and get out of here
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 17:14:34 +08:00
goto out_unlock;
}
handle_irq_event(desc);
genirq: Add oneshot support For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:22 +08:00
cond_unmask_irq(desc);
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 17:14:34 +08:00
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_level_irq);
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
static inline void preflow_handler(struct irq_desc *desc)
{
if (desc->preflow_handler)
desc->preflow_handler(&desc->irq_data);
}
#else
static inline void preflow_handler(struct irq_desc *desc) { }
#endif
/**
* handle_fasteoi_irq - irq handler for transparent controllers
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Only a single callback will be issued to the chip: an ->eoi()
* call when the interrupt has been serviced. This enables support
* for modern forms of interrupt handlers, which handle the flow
* details in hardware, transparently.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
if (unlikely(irqd_irq_inprogress(&desc->irq_data)))
if (!irq_check_poll(desc))
goto out;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
kstat_incr_irqs_this_cpu(irq, desc);
/*
* If its disabled or no action available
* then mask it and get out of here:
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
mask_irq(desc);
goto out;
}
if (desc->istate & IRQS_ONESHOT)
mask_irq(desc);
preflow_handler(desc);
handle_irq_event(desc);
if (desc->istate & IRQS_ONESHOT)
cond_unmask_irq(desc);
out_eoi:
desc->irq_data.chip->irq_eoi(&desc->irq_data);
out_unlock:
raw_spin_unlock(&desc->lock);
return;
out:
if (!(desc->irq_data.chip->flags & IRQCHIP_EOI_IF_HANDLED))
goto out_eoi;
goto out_unlock;
}
/**
* handle_edge_irq - edge type IRQ handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Interrupt occures on the falling and/or rising edge of a hardware
* signal. The occurrence is latched into the irq controller hardware
* and must be acked in order to be reenabled. After the ack another
* interrupt can happen on the same source even before the first one
* is handled by the associated event handler. If this happens it
* might be necessary to disable (mask) the interrupt depending on the
* controller hardware. This requires to reenable the interrupt inside
* of the loop which handles the interrupts which have arrived while
* the handler was running. If all pending interrupts are handled, the
* loop is left.
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_edge_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If we're currently running this IRQ, or its disabled,
* we shouldn't process the IRQ. Mark it pending, handle
* the necessary masking and go out
*/
if (unlikely(irqd_irq_disabled(&desc->irq_data) ||
irqd_irq_inprogress(&desc->irq_data) || !desc->action)) {
if (!irq_check_poll(desc)) {
desc->istate |= IRQS_PENDING;
mask_ack_irq(desc);
goto out_unlock;
}
}
kstat_incr_irqs_this_cpu(irq, desc);
/* Start handling the irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
do {
if (unlikely(!desc->action)) {
mask_irq(desc);
goto out_unlock;
}
/*
* When another irq arrived while we were handling
* one, we could have masked the irq.
* Renable it, if it was not disabled in meantime.
*/
if (unlikely(desc->istate & IRQS_PENDING)) {
if (!irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data))
unmask_irq(desc);
}
handle_irq_event(desc);
} while ((desc->istate & IRQS_PENDING) &&
!irqd_irq_disabled(&desc->irq_data));
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL(handle_edge_irq);
#ifdef CONFIG_IRQ_EDGE_EOI_HANDLER
/**
* handle_edge_eoi_irq - edge eoi type IRQ handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Similar as the above handle_edge_irq, but using eoi and w/o the
* mask/unmask logic.
*/
void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
raw_spin_lock(&desc->lock);
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If we're currently running this IRQ, or its disabled,
* we shouldn't process the IRQ. Mark it pending, handle
* the necessary masking and go out
*/
if (unlikely(irqd_irq_disabled(&desc->irq_data) ||
irqd_irq_inprogress(&desc->irq_data) || !desc->action)) {
if (!irq_check_poll(desc)) {
desc->istate |= IRQS_PENDING;
goto out_eoi;
}
}
kstat_incr_irqs_this_cpu(irq, desc);
do {
if (unlikely(!desc->action))
goto out_eoi;
handle_irq_event(desc);
} while ((desc->istate & IRQS_PENDING) &&
!irqd_irq_disabled(&desc->irq_data));
out_eoi:
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
#endif
/**
* handle_percpu_irq - Per CPU local irq handler
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements
*/
void
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
kstat_incr_irqs_this_cpu(irq, desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
handle_irq_event_percpu(desc, desc->action);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
/**
* handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements. Same as
* handle_percpu_irq() above but with the following extras:
*
* action->percpu_dev_id is a pointer to percpu variables which
* contain the real device id for the cpu on which this handler is
* called
*/
void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct irqaction *action = desc->action;
void *dev_id = __this_cpu_ptr(action->percpu_dev_id);
irqreturn_t res;
kstat_incr_irqs_this_cpu(irq, desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
trace_irq_handler_entry(irq, action);
res = action->handler(irq, dev_id);
trace_irq_handler_exit(irq, action, res);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, 0);
if (!desc)
return;
if (!handle) {
handle = handle_bad_irq;
} else {
if (WARN_ON(desc->irq_data.chip == &no_irq_chip))
goto out;
}
/* Uninstall? */
if (handle == handle_bad_irq) {
if (desc->irq_data.chip != &no_irq_chip)
mask_ack_irq(desc);
irq_state_set_disabled(desc);
desc->depth = 1;
}
desc->handle_irq = handle;
desc->name = name;
if (handle != handle_bad_irq && is_chained) {
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
irq_settings_set_nothread(desc);
irq_startup(desc, true);
}
out:
irq_put_desc_busunlock(desc, flags);
}
EXPORT_SYMBOL_GPL(__irq_set_handler);
void
irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle, const char *name)
{
irq_set_chip(irq, chip);
__irq_set_handler(irq, handle, 0, name);
}
EXPORT_SYMBOL_GPL(irq_set_chip_and_handler_name);
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return;
irq_settings_clr_and_set(desc, clr, set);
irqd_clear(&desc->irq_data, IRQD_NO_BALANCING | IRQD_PER_CPU |
IRQD_TRIGGER_MASK | IRQD_LEVEL | IRQD_MOVE_PCNTXT);
if (irq_settings_has_no_balance_set(desc))
irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
if (irq_settings_is_per_cpu(desc))
irqd_set(&desc->irq_data, IRQD_PER_CPU);
if (irq_settings_can_move_pcntxt(desc))
irqd_set(&desc->irq_data, IRQD_MOVE_PCNTXT);
if (irq_settings_is_level(desc))
irqd_set(&desc->irq_data, IRQD_LEVEL);
irqd_set(&desc->irq_data, irq_settings_get_trigger_mask(desc));
irq_put_desc_unlock(desc, flags);
}
EXPORT_SYMBOL_GPL(irq_modify_status);
/**
* irq_cpu_online - Invoke all irq_cpu_online functions.
*
* Iterate through all irqs and invoke the chip.irq_cpu_online()
* for each.
*/
void irq_cpu_online(void)
{
struct irq_desc *desc;
struct irq_chip *chip;
unsigned long flags;
unsigned int irq;
for_each_active_irq(irq) {
desc = irq_to_desc(irq);
if (!desc)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
chip = irq_data_get_irq_chip(&desc->irq_data);
if (chip && chip->irq_cpu_online &&
(!(chip->flags & IRQCHIP_ONOFFLINE_ENABLED) ||
!irqd_irq_disabled(&desc->irq_data)))
chip->irq_cpu_online(&desc->irq_data);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
/**
* irq_cpu_offline - Invoke all irq_cpu_offline functions.
*
* Iterate through all irqs and invoke the chip.irq_cpu_offline()
* for each.
*/
void irq_cpu_offline(void)
{
struct irq_desc *desc;
struct irq_chip *chip;
unsigned long flags;
unsigned int irq;
for_each_active_irq(irq) {
desc = irq_to_desc(irq);
if (!desc)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
chip = irq_data_get_irq_chip(&desc->irq_data);
if (chip && chip->irq_cpu_offline &&
(!(chip->flags & IRQCHIP_ONOFFLINE_ENABLED) ||
!irqd_irq_disabled(&desc->irq_data)))
chip->irq_cpu_offline(&desc->irq_data);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}