linux-sg2042/fs/btrfs/btrfs_inode.h

374 lines
10 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#ifndef BTRFS_INODE_H
#define BTRFS_INODE_H
Btrfs: improve inode hash function/inode lookup Currently the hash value used for adding an inode to the VFS's inode hash table consists of the plain inode number, which is a 64 bits integer. This results in hash table buckets (hlist_head lists) with too many elements for at least 2 important scenarios: 1) When we have many subvolumes. Each subvolume has its own btree where its files and directories are added to, and each has its own objectid (inode number) namespace. This means that if we have N subvolumes, and all have inode number X associated to a file or directory, the corresponding inodes all map to the same hash table entry, resulting in a bucket (hlist_head list) with N elements; 2) On 32 bits machines. Th VFS hash values are unsigned longs, which are 32 bits wide on 32 bits machines, and the inode (objectid) numbers are 64 bits unsigned integers. We simply cast the inode numbers to hash values, which means that for all inodes with the same 32 bits lower half, the same hash bucket is used for all of them. For example, all inodes with a number (objectid) between 0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in the same hash table bucket. This change ensures the inode's hash value depends both on the objectid (inode number) and its subvolume's (btree root) objectid. For 32 bits machines, this change gives better entropy by making the hash value depend on both the upper and lower 32 bits of the 64 bits hash previously computed. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-07 05:22:33 +08:00
#include <linux/hash.h>
#include <linux/refcount.h>
#include "extent_map.h"
#include "extent_io.h"
#include "ordered-data.h"
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 18:12:22 +08:00
#include "delayed-inode.h"
/*
* ordered_data_close is set by truncate when a file that used
* to have good data has been truncated to zero. When it is set
* the btrfs file release call will add this inode to the
* ordered operations list so that we make sure to flush out any
* new data the application may have written before commit.
*/
enum {
BTRFS_INODE_FLUSH_ON_CLOSE,
BTRFS_INODE_DUMMY,
BTRFS_INODE_IN_DEFRAG,
BTRFS_INODE_HAS_ASYNC_EXTENT,
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
/*
* Always set under the VFS' inode lock, otherwise it can cause races
* during fsync (we start as a fast fsync and then end up in a full
* fsync racing with ordered extent completion).
*/
BTRFS_INODE_NEEDS_FULL_SYNC,
BTRFS_INODE_COPY_EVERYTHING,
BTRFS_INODE_IN_DELALLOC_LIST,
BTRFS_INODE_HAS_PROPS,
btrfs: use tagged writepage to mitigate livelock of snapshot Snapshot is expected to be fast. But if there are writers steadily creating dirty pages in our subvolume, the snapshot may take a very long time to complete. To fix the problem, we use tagged writepage for snapshot flusher as we do in the generic write_cache_pages(), so we can omit pages dirtied after the snapshot command. This does not change the semantics regarding which data get to the snapshot, if there are pages being dirtied during the snapshotting operation. There's a sync called before snapshot is taken in old/new case, any IO in flight just after that may be in the snapshot but this depends on other system effects that might still sync the IO. We do a simple snapshot speed test on a Intel D-1531 box: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=write --size=64G --direct=0 --thread=1 --numjobs=1 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 1m58sec patched: 6.54sec This is the best case for this patch since for a sequential write case, we omit nearly all pages dirtied after the snapshot command. For a multi writers, random write test: fio --ioengine=libaio --iodepth=32 --bs=4k --rw=randwrite --size=64G --direct=0 --thread=1 --numjobs=4 --time_based --runtime=120 --filename=/mnt/sub/testfile --name=job1 --group_reporting & sleep 5; time btrfs sub snap -r /mnt/sub /mnt/snap; killall fio original: 15.83sec patched: 10.35sec The improvement is smaller compared to the sequential write case, since we omit only half of the pages dirtied after snapshot command. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Ethan Lien <ethanlien@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-01 14:49:03 +08:00
BTRFS_INODE_SNAPSHOT_FLUSH,
btrfs: skip unnecessary searches for xattrs when logging an inode Every time we log an inode we lookup in the fs/subvol tree for xattrs and if we have any, log them into the log tree. However it is very common to have inodes without any xattrs, so doing the search wastes times, but more importantly it adds contention on the fs/subvol tree locks, either making the logging code block and wait for tree locks or making the logging code making other concurrent operations block and wait. The most typical use cases where xattrs are used are when capabilities or ACLs are defined for an inode, or when SELinux is enabled. This change makes the logging code detect when an inode does not have xattrs and skip the xattrs search the next time the inode is logged, unless the inode is evicted and loaded again or a xattr is added to the inode. Therefore skipping the search for xattrs on inodes that don't ever have xattrs and are fsynced with some frequency. The following script that calls dbench was used to measure the impact of this change on a VM with 8 CPUs, 16Gb of ram, using a raw NVMe device directly (no intermediary filesystem on the host) and using a non-debug kernel (default configuration on Debian distributions): $ cat test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" mkfs.btrfs -f -m single -d single $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 200 40 umount $MNT The results before this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 5761605 0.172 312.057 Close 4232452 0.002 10.927 Rename 243937 1.406 277.344 Unlink 1163456 0.631 298.402 Deltree 160 11.581 221.107 Mkdir 80 0.003 0.005 Qpathinfo 5221410 0.065 122.309 Qfileinfo 915432 0.001 3.333 Qfsinfo 957555 0.003 3.992 Sfileinfo 469244 0.023 20.494 Find 2018865 0.448 123.659 WriteX 2874851 0.049 118.529 ReadX 9030579 0.004 21.654 LockX 18754 0.003 4.423 UnlockX 18754 0.002 0.331 Flush 403792 10.944 359.494 Throughput 908.444 MB/sec 40 clients 40 procs max_latency=359.500 ms The results after this change: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 6442521 0.159 230.693 Close 4732357 0.002 10.972 Rename 272809 1.293 227.398 Unlink 1301059 0.563 218.500 Deltree 160 7.796 54.887 Mkdir 80 0.008 0.478 Qpathinfo 5839452 0.047 124.330 Qfileinfo 1023199 0.001 4.996 Qfsinfo 1070760 0.003 5.709 Sfileinfo 524790 0.033 21.765 Find 2257658 0.314 125.611 WriteX 3211520 0.040 232.135 ReadX 10098969 0.004 25.340 LockX 20974 0.003 1.569 UnlockX 20974 0.002 3.475 Flush 451553 10.287 331.037 Throughput 1011.77 MB/sec 40 clients 40 procs max_latency=331.045 ms +10.8% throughput, -8.2% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-13 19:21:49 +08:00
/*
* Set and used when logging an inode and it serves to signal that an
* inode does not have xattrs, so subsequent fsyncs can avoid searching
* for xattrs to log. This bit must be cleared whenever a xattr is added
* to an inode.
*/
BTRFS_INODE_NO_XATTRS,
btrfs: fix deadlock when cloning inline extent and low on free metadata space When cloning an inline extent there are cases where we can not just copy the inline extent from the source range to the target range (e.g. when the target range starts at an offset greater than zero). In such cases we copy the inline extent's data into a page of the destination inode and then dirty that page. However, after that we will need to start a transaction for each processed extent and, if we are ever low on available metadata space, we may need to flush existing delalloc for all dirty inodes in an attempt to release metadata space - if that happens we may deadlock: * the async reclaim task queued a delalloc work to flush delalloc for the destination inode of the clone operation; * the task executing that delalloc work gets blocked waiting for the range with the dirty page to be unlocked, which is currently locked by the task doing the clone operation; * the async reclaim task blocks waiting for the delalloc work to complete; * the cloning task is waiting on the waitqueue of its reservation ticket while holding the range with the dirty page locked in the inode's io_tree; * if metadata space is not released by some other task (like delalloc for some other inode completing for example), the clone task waits forever and as a consequence the delalloc work and async reclaim tasks will hang forever as well. Releasing more space on the other hand may require starting a transaction, which will hang as well when trying to reserve metadata space, resulting in a deadlock between all these tasks. When this happens, traces like the following show up in dmesg/syslog: [87452.323003] INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds. [87452.323644] Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 [87452.324248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [87452.324852] task:kworker/u16:11 state:D stack: 0 pid:1810830 ppid: 2 flags:0x00004000 [87452.325520] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [87452.326136] Call Trace: [87452.326737] __schedule+0x5d1/0xcf0 [87452.327390] schedule+0x45/0xe0 [87452.328174] lock_extent_bits+0x1e6/0x2d0 [btrfs] [87452.328894] ? finish_wait+0x90/0x90 [87452.329474] btrfs_invalidatepage+0x32c/0x390 [btrfs] [87452.330133] ? __mod_memcg_state+0x8e/0x160 [87452.330738] __extent_writepage+0x2d4/0x400 [btrfs] [87452.331405] extent_write_cache_pages+0x2b2/0x500 [btrfs] [87452.332007] ? lock_release+0x20e/0x4c0 [87452.332557] ? trace_hardirqs_on+0x1b/0xf0 [87452.333127] extent_writepages+0x43/0x90 [btrfs] [87452.333653] ? lock_acquire+0x1a3/0x490 [87452.334177] do_writepages+0x43/0xe0 [87452.334699] ? __filemap_fdatawrite_range+0xa4/0x100 [87452.335720] __filemap_fdatawrite_range+0xc5/0x100 [87452.336500] btrfs_run_delalloc_work+0x17/0x40 [btrfs] [87452.337216] btrfs_work_helper+0xf1/0x600 [btrfs] [87452.337838] process_one_work+0x24e/0x5e0 [87452.338437] worker_thread+0x50/0x3b0 [87452.339137] ? process_one_work+0x5e0/0x5e0 [87452.339884] kthread+0x153/0x170 [87452.340507] ? kthread_mod_delayed_work+0xc0/0xc0 [87452.341153] ret_from_fork+0x22/0x30 [87452.341806] INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds. [87452.342487] Tainted: G B W 5.10.0-rc4-btrfs-next-73 #1 [87452.343274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [87452.344049] task:kworker/u16:1 state:D stack: 0 pid:2426217 ppid: 2 flags:0x00004000 [87452.344974] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [87452.345655] Call Trace: [87452.346305] __schedule+0x5d1/0xcf0 [87452.346947] ? kvm_clock_read+0x14/0x30 [87452.347676] ? wait_for_completion+0x81/0x110 [87452.348389] schedule+0x45/0xe0 [87452.349077] schedule_timeout+0x30c/0x580 [87452.349718] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [87452.350340] ? lock_acquire+0x1a3/0x490 [87452.351006] ? try_to_wake_up+0x7a/0xa20 [87452.351541] ? lock_release+0x20e/0x4c0 [87452.352040] ? lock_acquired+0x199/0x490 [87452.352517] ? wait_for_completion+0x81/0x110 [87452.353000] wait_for_completion+0xab/0x110 [87452.353490] start_delalloc_inodes+0x2af/0x390 [btrfs] [87452.353973] btrfs_start_delalloc_roots+0x12d/0x250 [btrfs] [87452.354455] flush_space+0x24f/0x660 [btrfs] [87452.355063] btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs] [87452.355565] process_one_work+0x24e/0x5e0 [87452.356024] worker_thread+0x20f/0x3b0 [87452.356487] ? process_one_work+0x5e0/0x5e0 [87452.356973] kthread+0x153/0x170 [87452.357434] ? kthread_mod_delayed_work+0xc0/0xc0 [87452.357880] ret_from_fork+0x22/0x30 (...) < stack traces of several tasks waiting for the locks of the inodes of the clone operation > (...) [92867.444138] RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000052 [92867.444624] RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73f97 [92867.445116] RDX: 0000000000000000 RSI: 0000560fbd5d7a40 RDI: 0000560fbd5d8960 [92867.445595] RBP: 00007ffc3371beb0 R08: 0000000000000001 R09: 0000000000000003 [92867.446070] R10: 00007ffc3371b996 R11: 0000000000000246 R12: 0000000000000000 [92867.446820] R13: 000000000000001f R14: 00007ffc3371bea0 R15: 00007ffc3371beb0 [92867.447361] task:fsstress state:D stack: 0 pid:2508238 ppid:2508153 flags:0x00004000 [92867.447920] Call Trace: [92867.448435] __schedule+0x5d1/0xcf0 [92867.448934] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [92867.449423] schedule+0x45/0xe0 [92867.449916] __reserve_bytes+0x4a4/0xb10 [btrfs] [92867.450576] ? finish_wait+0x90/0x90 [92867.451202] btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs] [92867.451815] btrfs_block_rsv_add+0x1f/0x50 [btrfs] [92867.452412] start_transaction+0x2d1/0x760 [btrfs] [92867.453216] clone_copy_inline_extent+0x333/0x490 [btrfs] [92867.453848] ? lock_release+0x20e/0x4c0 [92867.454539] ? btrfs_search_slot+0x9a7/0xc30 [btrfs] [92867.455218] btrfs_clone+0x569/0x7e0 [btrfs] [92867.455952] btrfs_clone_files+0xf6/0x150 [btrfs] [92867.456588] btrfs_remap_file_range+0x324/0x3d0 [btrfs] [92867.457213] do_clone_file_range+0xd4/0x1f0 [92867.457828] vfs_clone_file_range+0x4d/0x230 [92867.458355] ? lock_release+0x20e/0x4c0 [92867.458890] ioctl_file_clone+0x8f/0xc0 [92867.459377] do_vfs_ioctl+0x342/0x750 [92867.459913] __x64_sys_ioctl+0x62/0xb0 [92867.460377] do_syscall_64+0x33/0x80 [92867.460842] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (...) < stack traces of more tasks blocked on metadata reservation like the clone task above, because the async reclaim task has deadlocked > (...) Another thing to notice is that the worker task that is deadlocked when trying to flush the destination inode of the clone operation is at btrfs_invalidatepage(). This is simply because the clone operation has a destination offset greater than the i_size and we only update the i_size of the destination file after cloning an extent (just like we do in the buffered write path). Since the async reclaim path uses btrfs_start_delalloc_roots() to trigger the flushing of delalloc for all inodes that have delalloc, add a runtime flag to an inode to signal it should not be flushed, and for inodes with that flag set, start_delalloc_inodes() will simply skip them. When the cloning code needs to dirty a page to copy an inline extent, set that flag on the inode and then clear it when the clone operation finishes. This could be sporadically triggered with test case generic/269 from fstests, which exercises many fsstress processes running in parallel with several dd processes filling up the entire filesystem. CC: stable@vger.kernel.org # 5.9+ Fixes: 05a5a7621ce6 ("Btrfs: implement full reflink support for inline extents") Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-02 19:55:58 +08:00
/*
* Set when we are in a context where we need to start a transaction and
* have dirty pages with the respective file range locked. This is to
* ensure that when reserving space for the transaction, if we are low
* on available space and need to flush delalloc, we will not flush
* delalloc for this inode, because that could result in a deadlock (on
* the file range, inode's io_tree).
*/
BTRFS_INODE_NO_DELALLOC_FLUSH,
};
/* in memory btrfs inode */
struct btrfs_inode {
/* which subvolume this inode belongs to */
struct btrfs_root *root;
/* key used to find this inode on disk. This is used by the code
* to read in roots of subvolumes
*/
struct btrfs_key location;
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
/*
* Lock for counters and all fields used to determine if the inode is in
* the log or not (last_trans, last_sub_trans, last_log_commit,
btrfs: update the number of bytes used by an inode atomically There are several occasions where we do not update the inode's number of used bytes atomically, resulting in a concurrent stat(2) syscall to report a value of used blocks that does not correspond to a valid value, that is, a value that does not match neither what we had before the operation nor what we get after the operation completes. In extreme cases it can result in stat(2) reporting zero used blocks, which can cause problems for some userspace tools where they can consider a file with a non-zero size and zero used blocks as completely sparse and skip reading data, as reported/discussed a long time ago in some threads like the following: https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html The cases where this can happen are the following: -> Case 1 If we do a write (buffered or direct IO) against a file region for which there is already an allocated extent (or multiple extents), then we have a short time window where we can report a number of used blocks to stat(2) that does not take into account the file region being overwritten. This short time window happens when completing the ordered extent(s). This happens because when we drop the extents in the write range we decrement the inode's number of bytes and later on when we insert the new extent(s) we increment the number of bytes in the inode, resulting in a short time window where a stat(2) syscall can get an incorrect number of used blocks. If we do writes that overwrite an entire file, then we have a short time window where we report 0 used blocks to stat(2). Example reproducer: $ cat reproducer-1.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi stat_loop() { trap "wait; exit" SIGTERM local filepath=$1 local expected=$2 local got while :; do got=$(stat -c %b $filepath) if [ $got -ne $expected ]; then echo -n "ERROR: unexpected used blocks" echo " (got: $got expected: $expected)" fi done } mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f $DEV > /dev/null # mkfs.ext4 -F $DEV > /dev/null # mkfs.f2fs -f $DEV > /dev/null # mkfs.reiserfs -f $DEV > /dev/null mount $DEV $MNT xfs_io -f -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null expected=$(stat -c %b $MNT/foobar) # Create a process to keep calling stat(2) on the file and see if the # reported number of blocks used (disk space used) changes, it should # not because we are not increasing the file size nor punching holes. stat_loop $MNT/foobar $expected & loop_pid=$! for ((i = 0; i < 50000; i++)); do xfs_io -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null done kill $loop_pid &> /dev/null wait umount $DEV $ ./reproducer-1.sh ERROR: unexpected used blocks (got: 0 expected: 128) ERROR: unexpected used blocks (got: 0 expected: 128) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. -> Case 2 If we do a buffered write against a file region that does not have any allocated extents, like a hole or beyond EOF, then during ordered extent completion we have a short time window where a concurrent stat(2) syscall can report a number of used blocks that does not correspond to the value before or after the write operation, a value that is actually larger than the value after the write completes. This happens because once we start a buffered write into an unallocated file range we increment the inode's 'new_delalloc_bytes', to make sure any stat(2) call gets a correct used blocks value before delalloc is flushed and completes. However at ordered extent completion, after we inserted the new extent, we increment the inode's number of bytes used with the size of the new extent, and only later, when clearing the range in the inode's iotree, we decrement the inode's 'new_delalloc_bytes' counter with the size of the extent. So this results in a short time window where a concurrent stat(2) syscall can report a number of used blocks that accounts for the new extent twice. Example reproducer: $ cat reproducer-2.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi stat_loop() { trap "wait; exit" SIGTERM local filepath=$1 local expected=$2 local got while :; do got=$(stat -c %b $filepath) if [ $got -ne $expected ]; then echo -n "ERROR: unexpected used blocks" echo " (got: $got expected: $expected)" fi done } mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f $DEV > /dev/null # mkfs.ext4 -F $DEV > /dev/null # mkfs.f2fs -f $DEV > /dev/null # mkfs.reiserfs -f $DEV > /dev/null mount $DEV $MNT touch $MNT/foobar write_size=$((64 * 1024)) for ((i = 0; i < 16384; i++)); do offset=$(($i * $write_size)) xfs_io -c "pwrite -S 0xab $offset $write_size" $MNT/foobar >/dev/null blocks_used=$(stat -c %b $MNT/foobar) # Fsync the file to trigger writeback and keep calling stat(2) on it # to see if the number of blocks used changes. stat_loop $MNT/foobar $blocks_used & loop_pid=$! xfs_io -c "fsync" $MNT/foobar kill $loop_pid &> /dev/null wait $loop_pid done umount $DEV $ ./reproducer-2.sh ERROR: unexpected used blocks (got: 265472 expected: 265344) ERROR: unexpected used blocks (got: 284032 expected: 283904) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. -> Case 3 Another case where such problems happen is during other operations that replace extents in a file range with other extents. Those operations are extent cloning, deduplication and fallocate's zero range operation. The cause of the problem is similar to the first case. When we drop the extents from a range, we decrement the inode's number of bytes, and later on, after inserting the new extents we increment it. Since this is not done atomically, a concurrent stat(2) call can see and return a number of used blocks that is smaller than it should be, does not match the number of used blocks before or after the clone/deduplication/zero operation. Like for the first case, when doing a clone, deduplication or zero range operation against an entire file, we end up having a time window where we can report 0 used blocks to a stat(2) call. Example reproducer: $ cat reproducer-3.sh #!/bin/bash MNT=/mnt/sdi DEV=/dev/sdi mkfs.btrfs -f $DEV > /dev/null # mkfs.xfs -f -m reflink=1 $DEV > /dev/null mount $DEV $MNT extent_size=$((64 * 1024)) num_extents=16384 file_size=$(($extent_size * $num_extents)) # File foo has many small extents. xfs_io -f -s -c "pwrite -S 0xab -b $extent_size 0 $file_size" $MNT/foo \ > /dev/null # File bar has much less extents and has exactly the same data as foo. xfs_io -f -c "pwrite -S 0xab 0 $file_size" $MNT/bar > /dev/null expected=$(stat -c %b $MNT/foo) # Now deduplicate bar into foo. While the deduplication is in progres, # the number of used blocks/file size reported by stat should not change xfs_io -c "dedupe $MNT/bar 0 0 $file_size" $MNT/foo > /dev/null & dedupe_pid=$! while [ -n "$(ps -p $dedupe_pid -o pid=)" ]; do used=$(stat -c %b $MNT/foo) if [ $used -ne $expected ]; then echo "Unexpected blocks used: $used (expected: $expected)" fi done umount $DEV $ ./reproducer-3.sh Unexpected blocks used: 2076800 (expected: 2097152) Unexpected blocks used: 2097024 (expected: 2097152) Unexpected blocks used: 2079872 (expected: 2097152) (...) Note that since this is a short time window where the race can happen, the reproducer may not be able to always trigger the bug in one run, or it may trigger it multiple times. So fix this by: 1) Making btrfs_drop_extents() not decrement the VFS inode's number of bytes, and instead return the number of bytes; 2) Making any code that drops extents and adds new extents update the inode's number of bytes atomically, while holding the btrfs inode's spinlock, which is also used by the stat(2) callback to get the inode's number of bytes; 3) For ranges in the inode's iotree that are marked as 'delalloc new', corresponding to previously unallocated ranges, increment the inode's number of bytes when clearing the 'delalloc new' bit from the range, in the same critical section that decrements the inode's 'new_delalloc_bytes' counter, delimited by the btrfs inode's spinlock. An alternative would be to have btrfs_getattr() wait for any IO (ordered extents in progress) and locking the whole range (0 to (u64)-1) while it it computes the number of blocks used. But that would mean blocking stat(2), which is a very used syscall and expected to be fast, waiting for writes, clone/dedupe, fallocate, page reads, fiemap, etc. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-04 19:07:34 +08:00
* logged_trans), to access/update new_delalloc_bytes and to update the
* VFS' inode number of bytes used.
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
*/
spinlock_t lock;
/* the extent_tree has caches of all the extent mappings to disk */
struct extent_map_tree extent_tree;
/* the io_tree does range state (DIRTY, LOCKED etc) */
struct extent_io_tree io_tree;
/* special utility tree used to record which mirrors have already been
* tried when checksums fail for a given block
*/
struct extent_io_tree io_failure_tree;
/*
* Keep track of where the inode has extent items mapped in order to
* make sure the i_size adjustments are accurate
*/
struct extent_io_tree file_extent_tree;
/* held while logging the inode in tree-log.c */
struct mutex log_mutex;
/* used to order data wrt metadata */
struct btrfs_ordered_inode_tree ordered_tree;
/* list of all the delalloc inodes in the FS. There are times we need
* to write all the delalloc pages to disk, and this list is used
* to walk them all.
*/
struct list_head delalloc_inodes;
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
/* node for the red-black tree that links inodes in subvolume root */
struct rb_node rb_node;
unsigned long runtime_flags;
/* Keep track of who's O_SYNC/fsyncing currently */
atomic_t sync_writers;
/* full 64 bit generation number, struct vfs_inode doesn't have a big
* enough field for this.
*/
u64 generation;
/*
* transid of the trans_handle that last modified this inode
*/
u64 last_trans;
/*
* transid that last logged this inode
*/
u64 logged_trans;
/*
* log transid when this inode was last modified
*/
int last_sub_trans;
/* a local copy of root's last_log_commit */
int last_log_commit;
/* total number of bytes pending delalloc, used by stat to calc the
* real block usage of the file
*/
u64 delalloc_bytes;
Btrfs: fix reported number of inode blocks Currently when there are buffered writes that were not yet flushed and they fall within allocated ranges of the file (that is, not in holes or beyond eof assuming there are no prealloc extents beyond eof), btrfs simply reports an incorrect number of used blocks through the stat(2) system call (or any of its variants), regardless of mount options or inode flags (compress, compress-force, nodatacow). This is because the number of blocks used that is reported is based on the current number of bytes in the vfs inode plus the number of dealloc bytes in the btrfs inode. The later covers bytes that both fall within allocated regions of the file and holes. Example scenarios where the number of reported blocks is wrong while the buffered writes are not flushed: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec) $ sync $ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec) # The following should have reported 64K... $ du -h /mnt/sdc/foo1 128K /mnt/sdc/foo1 $ sync # After flushing the buffered write, it now reports the correct value. $ du -h /mnt/sdc/foo1 64K /mnt/sdc/foo1 $ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec) $ sync $ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2 wrote 65536/65536 bytes at offset 65536 64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec) # The following should have reported 128K... $ du -h /mnt/sdc/foo2 192K /mnt/sdc/foo2 $ sync # After flushing the buffered write, it now reports the correct value. $ du -h /mnt/sdc/foo2 128K /mnt/sdc/foo2 So the number of used file blocks is simply incorrect, unlike in other filesystems such as ext4 and xfs for example, but only while the buffered writes are not flushed. Fix this by tracking the number of delalloc bytes that fall within holes and beyond eof of a file, and use instead this new counter when reporting the number of used blocks for an inode. Another different problem that exists is that the delalloc bytes counter is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from the respective range in the inode's iotree) and the vfs inode's bytes counter is only incremented when writeback finishes (through insert_reserved_file_extent()). Therefore while writeback is ongoing we simply report a wrong number of blocks used by an inode if the write operation covers a range previously unallocated. While this change does not fix this problem, it does minimizes it a lot by shortening that time window, as the new dealloc bytes counter (new_delalloc_bytes) is only decremented when writeback finishes right before updating the vfs inode's bytes counter. Fully fixing this second problem is not trivial and will be addressed later by a different patch. Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-04-03 17:45:46 +08:00
/*
* Total number of bytes pending delalloc that fall within a file
* range that is either a hole or beyond EOF (and no prealloc extent
* exists in the range). This is always <= delalloc_bytes.
*/
u64 new_delalloc_bytes;
/*
* total number of bytes pending defrag, used by stat to check whether
* it needs COW.
*/
u64 defrag_bytes;
/*
* the size of the file stored in the metadata on disk. data=ordered
* means the in-memory i_size might be larger than the size on disk
* because not all the blocks are written yet.
*/
u64 disk_i_size;
/*
* if this is a directory then index_cnt is the counter for the index
* number for new files that are created
*/
u64 index_cnt;
/* Cache the directory index number to speed the dir/file remove */
u64 dir_index;
Btrfs: tree logging unlink/rename fixes The tree logging code allows individual files or directories to be logged without including operations on other files and directories in the FS. It tries to commit the minimal set of changes to disk in order to fsync the single file or directory that was sent to fsync or O_SYNC. The tree logging code was allowing files and directories to be unlinked if they were part of a rename operation where only one directory in the rename was in the fsync log. This patch adds a few new rules to the tree logging. 1) on rename or unlink, if the inode being unlinked isn't in the fsync log, we must force a full commit before doing an fsync of the directory where the unlink was done. The commit isn't done during the unlink, but it is forced the next time we try to log the parent directory. Solution: record transid of last unlink/rename per directory when the directory wasn't already logged. For renames this is only done when renaming to a different directory. mkdir foo/some_dir normal commit rename foo/some_dir foo2/some_dir mkdir foo/some_dir fsync foo/some_dir/some_file The fsync above will unlink the original some_dir without recording it in its new location (foo2). After a crash, some_dir will be gone unless the fsync of some_file forces a full commit 2) we must log any new names for any file or dir that is in the fsync log. This way we make sure not to lose files that are unlinked during the same transaction. 2a) we must log any new names for any file or dir during rename when the directory they are being removed from was logged. 2a is actually the more important variant. Without the extra logging a crash might unlink the old name without recreating the new one 3) after a crash, we must go through any directories with a link count of zero and redo the rm -rf mkdir f1/foo normal commit rm -rf f1/foo fsync(f1) The directory f1 was fully removed from the FS, but fsync was never called on f1, only its parent dir. After a crash the rm -rf must be replayed. This must be able to recurse down the entire directory tree. The inode link count fixup code takes care of the ugly details. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24 22:24:20 +08:00
/* the fsync log has some corner cases that mean we have to check
* directories to see if any unlinks have been done before
* the directory was logged. See tree-log.c for all the
* details
*/
u64 last_unlink_trans;
btrfs: reduce contention on log trees when logging checksums The possibility of extents being shared (through clone and deduplication operations) requires special care when logging data checksums, to avoid having a log tree with different checksum items that cover ranges which overlap (which resulted in missing checksums after replaying a log tree). Such problems were fixed in the past by the following commits: commit 40e046acbd2f ("Btrfs: fix missing data checksums after replaying a log tree") commit e289f03ea79b ("btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents") Test case generic/588 exercises the scenario solved by the first commit (purely sequential and deterministic) while test case generic/457 often triggered the case fixed by the second commit (not deterministic, requires specific timings under concurrency). The problems were addressed by deleting, from the log tree, any existing checksums before logging the new ones. And also by doing the deletion and logging of the cheksums while locking the checksum range in an extent io tree (root->log_csum_range), to deal with the case where we have concurrent fsyncs against files with shared extents. That however causes more contention on the leaves of a log tree where we store checksums (and all the nodes in the paths leading to them), even when we do not have shared extents, or all the shared extents were created by past transactions. It also adds a bit of contention on the spin lock of the log_csums_range extent io tree of the log root. This change adds a 'last_reflink_trans' field to the inode to keep track of the last transaction where a new extent was shared between inodes (through clone and deduplication operations). It is updated for both the source and destination inodes of reflink operations whenever a new extent (created in the current transaction) becomes shared by the inodes. This field is kept in memory only, not persisted in the inode item, similar to other existing fields (last_unlink_trans, logged_trans). When logging checksums for an extent, if the value of 'last_reflink_trans' is smaller then the current transaction's generation/id, we skip locking the extent range and deletion of checksums from the log tree, since we know we do not have new shared extents. This reduces contention on the log tree's leaves where checksums are stored. The following script, which uses fio, was used to measure the impact of this change: $ cat test-fsync.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-d single -m single" if [ $# -ne 3 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 cat <<EOF > /tmp/fio-job.ini [writers] rw=write fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=64k ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "Using config:" echo cat /tmp/fio-job.ini echo mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The tests were performed for different numbers of jobs, file sizes and fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has 12 cores, with cpu governance set to performance mode on all cores), 16GiB of ram (the host has 64GiB) and using a NVMe device directly (without an intermediary filesystem in the host). While running the tests, the host was not used for anything else, to avoid disturbing the tests. The obtained results were the following (the last line of fio's output was pasted). Starting with 16 jobs is where a significant difference is observable in this particular setup and hardware (differences highlighted below). The very small differences for tests with less than 16 jobs are possibly just noise and random. **** 1 job, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=23.8MiB/s (24.9MB/s), 23.8MiB/s-23.8MiB/s (24.9MB/s-24.9MB/s), io=1024MiB (1074MB), run=43075-43075msec after this change: WRITE: bw=24.4MiB/s (25.6MB/s), 24.4MiB/s-24.4MiB/s (25.6MB/s-25.6MB/s), io=1024MiB (1074MB), run=41938-41938msec **** 2 jobs, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=37.7MiB/s (39.5MB/s), 37.7MiB/s-37.7MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54351-54351msec after this change: WRITE: bw=37.7MiB/s (39.5MB/s), 37.6MiB/s-37.6MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54428-54428msec **** 4 jobs, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=67.5MiB/s (70.8MB/s), 67.5MiB/s-67.5MiB/s (70.8MB/s-70.8MB/s), io=4096MiB (4295MB), run=60669-60669msec after this change: WRITE: bw=68.6MiB/s (71.0MB/s), 68.6MiB/s-68.6MiB/s (71.0MB/s-71.0MB/s), io=4096MiB (4295MB), run=59678-59678msec **** 8 jobs, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=128MiB/s (134MB/s), 128MiB/s-128MiB/s (134MB/s-134MB/s), io=8192MiB (8590MB), run=64048-64048msec after this change: WRITE: bw=129MiB/s (135MB/s), 129MiB/s-129MiB/s (135MB/s-135MB/s), io=8192MiB (8590MB), run=63405-63405msec **** 16 jobs, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=78.5MiB/s (82.3MB/s), 78.5MiB/s-78.5MiB/s (82.3MB/s-82.3MB/s), io=16.0GiB (17.2GB), run=208676-208676msec after this change: WRITE: bw=110MiB/s (115MB/s), 110MiB/s-110MiB/s (115MB/s-115MB/s), io=16.0GiB (17.2GB), run=149295-149295msec (+40.1% throughput, -28.5% runtime) **** 32 jobs, file size 1G, fsync frequency 1 **** before this change: WRITE: bw=58.8MiB/s (61.7MB/s), 58.8MiB/s-58.8MiB/s (61.7MB/s-61.7MB/s), io=32.0GiB (34.4GB), run=557134-557134msec after this change: WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430550-430550msec (+29.4% throughput, -22.7% runtime) **** 64 jobs, file size 512M, fsync frequency 1 **** before this change: WRITE: bw=65.8MiB/s (68.0MB/s), 65.8MiB/s-65.8MiB/s (68.0MB/s-68.0MB/s), io=32.0GiB (34.4GB), run=498055-498055msec after this change: WRITE: bw=85.1MiB/s (89.2MB/s), 85.1MiB/s-85.1MiB/s (89.2MB/s-89.2MB/s), io=32.0GiB (34.4GB), run=385116-385116msec (+29.3% throughput, -22.7% runtime) **** 128 jobs, file size 256M, fsync frequency 1 **** before this change: WRITE: bw=54.7MiB/s (57.3MB/s), 54.7MiB/s-54.7MiB/s (57.3MB/s-57.3MB/s), io=32.0GiB (34.4GB), run=599373-599373msec after this change: WRITE: bw=121MiB/s (126MB/s), 121MiB/s-121MiB/s (126MB/s-126MB/s), io=32.0GiB (34.4GB), run=271907-271907msec (+121.2% throughput, -54.6% runtime) **** 256 jobs, file size 256M, fsync frequency 1 **** before this change: WRITE: bw=69.2MiB/s (72.5MB/s), 69.2MiB/s-69.2MiB/s (72.5MB/s-72.5MB/s), io=64.0GiB (68.7GB), run=947536-947536msec after this change: WRITE: bw=121MiB/s (127MB/s), 121MiB/s-121MiB/s (127MB/s-127MB/s), io=64.0GiB (68.7GB), run=541916-541916msec (+74.9% throughput, -42.8% runtime) **** 512 jobs, file size 128M, fsync frequency 1 **** before this change: WRITE: bw=85.4MiB/s (89.5MB/s), 85.4MiB/s-85.4MiB/s (89.5MB/s-89.5MB/s), io=64.0GiB (68.7GB), run=767734-767734msec after this change: WRITE: bw=141MiB/s (147MB/s), 141MiB/s-141MiB/s (147MB/s-147MB/s), io=64.0GiB (68.7GB), run=466022-466022msec (+65.1% throughput, -39.3% runtime) **** 1024 jobs, file size 128M, fsync frequency 1 **** before this change: WRITE: bw=115MiB/s (120MB/s), 115MiB/s-115MiB/s (120MB/s-120MB/s), io=128GiB (137GB), run=1143775-1143775msec after this change: WRITE: bw=171MiB/s (180MB/s), 171MiB/s-171MiB/s (180MB/s-180MB/s), io=128GiB (137GB), run=764843-764843msec (+48.7% throughput, -33.1% runtime) Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-15 19:30:43 +08:00
/*
* The id/generation of the last transaction where this inode was
* either the source or the destination of a clone/dedupe operation.
* Used when logging an inode to know if there are shared extents that
* need special care when logging checksum items, to avoid duplicate
* checksum items in a log (which can lead to a corruption where we end
* up with missing checksum ranges after log replay).
* Protected by the vfs inode lock.
*/
u64 last_reflink_trans;
/*
* Number of bytes outstanding that are going to need csums. This is
* used in ENOSPC accounting.
*/
u64 csum_bytes;
/* flags field from the on disk inode */
u32 flags;
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
/*
* Counters to keep track of the number of extent item's we may use due
* to delalloc and such. outstanding_extents is the number of extent
* items we think we'll end up using, and reserved_extents is the number
* of extent items we've reserved metadata for.
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
*/
unsigned outstanding_extents;
struct btrfs_block_rsv block_rsv;
Btrfs: proper -ENOSPC handling At the start of a transaction we do a btrfs_reserve_metadata_space() and specify how many items we plan on modifying. Then once we've done our modifications and such, just call btrfs_unreserve_metadata_space() for the same number of items we reserved. For keeping track of metadata needed for data I've had to add an extent_io op for when we merge extents. This lets us track space properly when we are doing sequential writes, so we don't end up reserving way more metadata space than what we need. The only place where the metadata space accounting is not done is in the relocation code. This is because Yan is going to be reworking that code in the near future, so running btrfs-vol -b could still possibly result in a ENOSPC related panic. This patch also turns off the metadata_ratio stuff in order to allow users to more efficiently use their disk space. This patch makes it so we track how much metadata we need for an inode's delayed allocation extents by tracking how many extents are currently waiting for allocation. It introduces two new callbacks for the extent_io tree's, merge_extent_hook and split_extent_hook. These help us keep track of when we merge delalloc extents together and split them up. Reservations are handled prior to any actually dirty'ing occurs, and then we unreserve after we dirty. btrfs_unreserve_metadata_for_delalloc() will make the appropriate unreservations as needed based on the number of reservations we currently have and the number of extents we currently have. Doing the reservation outside of doing any of the actual dirty'ing lets us do things like filemap_flush() the inode to try and force delalloc to happen, or as a last resort actually start allocation on all delalloc inodes in the fs. This has survived dbench, fs_mark and an fsx torture test. Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-12 04:12:44 +08:00
/*
* Cached values of inode properties
*/
unsigned prop_compress; /* per-file compression algorithm */
/*
* Force compression on the file using the defrag ioctl, could be
* different from prop_compress and takes precedence if set
*/
unsigned defrag_compress;
btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Reviewed-by: David Sterba <dave@jikos.cz> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Tested-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-22 18:12:22 +08:00
struct btrfs_delayed_node *delayed_node;
/* File creation time. */
struct timespec64 i_otime;
/* Hook into fs_info->delayed_iputs */
struct list_head delayed_iput;
struct inode vfs_inode;
};
static inline u32 btrfs_inode_sectorsize(const struct btrfs_inode *inode)
{
return inode->root->fs_info->sectorsize;
}
static inline struct btrfs_inode *BTRFS_I(const struct inode *inode)
{
return container_of(inode, struct btrfs_inode, vfs_inode);
}
Btrfs: improve inode hash function/inode lookup Currently the hash value used for adding an inode to the VFS's inode hash table consists of the plain inode number, which is a 64 bits integer. This results in hash table buckets (hlist_head lists) with too many elements for at least 2 important scenarios: 1) When we have many subvolumes. Each subvolume has its own btree where its files and directories are added to, and each has its own objectid (inode number) namespace. This means that if we have N subvolumes, and all have inode number X associated to a file or directory, the corresponding inodes all map to the same hash table entry, resulting in a bucket (hlist_head list) with N elements; 2) On 32 bits machines. Th VFS hash values are unsigned longs, which are 32 bits wide on 32 bits machines, and the inode (objectid) numbers are 64 bits unsigned integers. We simply cast the inode numbers to hash values, which means that for all inodes with the same 32 bits lower half, the same hash bucket is used for all of them. For example, all inodes with a number (objectid) between 0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in the same hash table bucket. This change ensures the inode's hash value depends both on the objectid (inode number) and its subvolume's (btree root) objectid. For 32 bits machines, this change gives better entropy by making the hash value depend on both the upper and lower 32 bits of the 64 bits hash previously computed. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-07 05:22:33 +08:00
static inline unsigned long btrfs_inode_hash(u64 objectid,
const struct btrfs_root *root)
{
u64 h = objectid ^ (root->root_key.objectid * GOLDEN_RATIO_PRIME);
Btrfs: improve inode hash function/inode lookup Currently the hash value used for adding an inode to the VFS's inode hash table consists of the plain inode number, which is a 64 bits integer. This results in hash table buckets (hlist_head lists) with too many elements for at least 2 important scenarios: 1) When we have many subvolumes. Each subvolume has its own btree where its files and directories are added to, and each has its own objectid (inode number) namespace. This means that if we have N subvolumes, and all have inode number X associated to a file or directory, the corresponding inodes all map to the same hash table entry, resulting in a bucket (hlist_head list) with N elements; 2) On 32 bits machines. Th VFS hash values are unsigned longs, which are 32 bits wide on 32 bits machines, and the inode (objectid) numbers are 64 bits unsigned integers. We simply cast the inode numbers to hash values, which means that for all inodes with the same 32 bits lower half, the same hash bucket is used for all of them. For example, all inodes with a number (objectid) between 0x0000_0000_ffff_ffff and 0xffff_ffff_ffff_ffff will end up in the same hash table bucket. This change ensures the inode's hash value depends both on the objectid (inode number) and its subvolume's (btree root) objectid. For 32 bits machines, this change gives better entropy by making the hash value depend on both the upper and lower 32 bits of the 64 bits hash previously computed. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-07 05:22:33 +08:00
#if BITS_PER_LONG == 32
h = (h >> 32) ^ (h & 0xffffffff);
#endif
return (unsigned long)h;
}
static inline void btrfs_insert_inode_hash(struct inode *inode)
{
unsigned long h = btrfs_inode_hash(inode->i_ino, BTRFS_I(inode)->root);
__insert_inode_hash(inode, h);
}
static inline u64 btrfs_ino(const struct btrfs_inode *inode)
{
u64 ino = inode->location.objectid;
/*
* !ino: btree_inode
* type == BTRFS_ROOT_ITEM_KEY: subvol dir
*/
if (!ino || inode->location.type == BTRFS_ROOT_ITEM_KEY)
ino = inode->vfs_inode.i_ino;
return ino;
}
static inline void btrfs_i_size_write(struct btrfs_inode *inode, u64 size)
{
i_size_write(&inode->vfs_inode, size);
inode->disk_i_size = size;
}
static inline bool btrfs_is_free_space_inode(struct btrfs_inode *inode)
{
struct btrfs_root *root = inode->root;
if (root == root->fs_info->tree_root &&
btrfs_ino(inode) != BTRFS_BTREE_INODE_OBJECTID)
return true;
if (inode->location.objectid == BTRFS_FREE_INO_OBJECTID)
return true;
return false;
}
static inline bool is_data_inode(struct inode *inode)
{
return btrfs_ino(BTRFS_I(inode)) != BTRFS_BTREE_INODE_OBJECTID;
}
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-20 02:15:55 +08:00
static inline void btrfs_mod_outstanding_extents(struct btrfs_inode *inode,
int mod)
{
lockdep_assert_held(&inode->lock);
inode->outstanding_extents += mod;
if (btrfs_is_free_space_inode(inode))
return;
trace_btrfs_inode_mod_outstanding_extents(inode->root, btrfs_ino(inode),
mod);
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-20 02:15:55 +08:00
}
static inline int btrfs_inode_in_log(struct btrfs_inode *inode, u64 generation)
{
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
int ret = 0;
spin_lock(&inode->lock);
if (inode->logged_trans == generation &&
inode->last_sub_trans <= inode->last_log_commit &&
inode->last_sub_trans <= inode->root->last_log_commit) {
/*
* After a ranged fsync we might have left some extent maps
* (that fall outside the fsync's range). So return false
* here if the list isn't empty, to make sure btrfs_log_inode()
* will be called and process those extent maps.
*/
smp_mb();
if (list_empty(&inode->extent_tree.modified_extents))
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
ret = 1;
}
spin_unlock(&inode->lock);
Btrfs: fix metadata inconsistencies after directory fsync We can get into inconsistency between inodes and directory entries after fsyncing a directory. The issue is that while a directory gets the new dentries persisted in the fsync log and replayed at mount time, the link count of the inode that directory entries point to doesn't get updated, staying with an incorrect link count (smaller then the correct value). This later leads to stale file handle errors when accessing (including attempt to delete) some of the links if all the other ones are removed, which also implies impossibility to delete the parent directories, since the dentries can not be removed. Another issue is that (unlike ext3/4, xfs, f2fs, reiserfs, nilfs2), when fsyncing a directory, new files aren't logged (their metadata and dentries) nor any child directories. So this patch fixes this issue too, since it has the same resolution as the incorrect inode link count issue mentioned before. This is very easy to reproduce, and the following excerpt from my test case for xfstests shows how: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file and directory. $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" $SCRATCH_MNT/foo | _filter_xfs_io mkdir $SCRATCH_MNT/mydir # Make sure all metadata and data are durably persisted. sync # Add a hard link to 'foo' inside our test directory and fsync only the # directory. The btrfs fsync implementation had a bug that caused the new # directory entry to be visible after the fsync log replay but, the inode # of our file remained with a link count of 1. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_2 # Add a few more links and new files. # This is just to verify nothing breaks or gives incorrect results after the # fsync log is replayed. ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/foo_3 $XFS_IO_PROG -f -c "pwrite -S 0xff 0 64K" $SCRATCH_MNT/hello | _filter_xfs_io ln $SCRATCH_MNT/hello $SCRATCH_MNT/mydir/hello_2 # Add some subdirectories and new files and links to them. This is to verify # that after fsyncing our top level directory 'mydir', all the subdirectories # and their files/links are registered in the fsync log and exist after the # fsync log is replayed. mkdir -p $SCRATCH_MNT/mydir/x/y/z ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/foo_y_link ln $SCRATCH_MNT/foo $SCRATCH_MNT/mydir/x/y/z/foo_z_link touch $SCRATCH_MNT/mydir/x/y/z/qwerty # Now fsync only our top directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/mydir # And fsync now our new file named 'hello', just to verify later that it has # the expected content and that the previous fsync on the directory 'mydir' had # no bad influence on this fsync. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/hello # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Verify the content of our file 'foo' remains the same as before, 8192 bytes, # all with the value 0xaa. echo "File 'foo' content after log replay:" od -t x1 $SCRATCH_MNT/foo # Remove the first name of our inode. Because of the directory fsync bug, the # inode's link count was 1 instead of 5, so removing the 'foo' name ended up # deleting the inode and the other names became stale directory entries (still # visible to applications). Attempting to remove or access the remaining # dentries pointing to that inode resulted in stale file handle errors and # made it impossible to remove the parent directories since it was impossible # for them to become empty. echo "file 'foo' link count after log replay: $(stat -c %h $SCRATCH_MNT/foo)" rm -f $SCRATCH_MNT/foo # Now verify that all files, links and directories created before fsyncing our # directory exist after the fsync log was replayed. [ -f $SCRATCH_MNT/mydir/foo_2 ] || echo "Link mydir/foo_2 is missing" [ -f $SCRATCH_MNT/mydir/foo_3 ] || echo "Link mydir/foo_3 is missing" [ -f $SCRATCH_MNT/hello ] || echo "File hello is missing" [ -f $SCRATCH_MNT/mydir/hello_2 ] || echo "Link mydir/hello_2 is missing" [ -f $SCRATCH_MNT/mydir/x/y/foo_y_link ] || \ echo "Link mydir/x/y/foo_y_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/foo_z_link ] || \ echo "Link mydir/x/y/z/foo_z_link is missing" [ -f $SCRATCH_MNT/mydir/x/y/z/qwerty ] || \ echo "File mydir/x/y/z/qwerty is missing" # We expect our file here to have a size of 64Kb and all the bytes having the # value 0xff. echo "file 'hello' content after log replay:" od -t x1 $SCRATCH_MNT/hello # Now remove all files/links, under our test directory 'mydir', and verify we # can remove all the directories. rm -f $SCRATCH_MNT/mydir/x/y/z/* rmdir $SCRATCH_MNT/mydir/x/y/z rm -f $SCRATCH_MNT/mydir/x/y/* rmdir $SCRATCH_MNT/mydir/x/y rmdir $SCRATCH_MNT/mydir/x rm -f $SCRATCH_MNT/mydir/* rmdir $SCRATCH_MNT/mydir # An fsck, run by the fstests framework everytime a test finishes, also detected # the inconsistency and printed the following error message: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref # unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref status=0 exit The expected golden output for the test is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 5 file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 Which is the output after this patch and when running the test against ext3/4, xfs, f2fs, reiserfs or nilfs2. Without this patch, the test's output is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File 'foo' content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 file 'foo' link count after log replay: 1 Link mydir/foo_2 is missing Link mydir/foo_3 is missing Link mydir/x/y/foo_y_link is missing Link mydir/x/y/z/foo_z_link is missing File mydir/x/y/z/qwerty is missing file 'hello' content after log replay: 0000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * 0200000 rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y/z': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x/y': No such file or directory rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/x': No such file or directory rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_2': Stale file handle rm: cannot remove '/home/fdmanana/btrfs-tests/scratch_1/mydir/foo_3': Stale file handle rmdir: failed to remove '/home/fdmanana/btrfs-tests/scratch_1/mydir': Directory not empty Fsck, without this fix, also complains about the wrong link count: root 5 inode 257 errors 2001, no inode item, link count wrong unresolved ref dir 258 index 2 namelen 5 name foo_2 filetype 1 errors 4, no inode ref unresolved ref dir 258 index 3 namelen 5 name foo_3 filetype 1 errors 4, no inode ref So fix this by logging the inodes that the dentries point to when fsyncing a directory. A test case for xfstests follows. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-03-21 01:19:46 +08:00
return ret;
}
struct btrfs_dio_private {
struct inode *inode;
u64 logical_offset;
u64 disk_bytenr;
/* Used for bio::bi_size */
u32 bytes;
/*
* References to this structure. There is one reference per in-flight
* bio plus one while we're still setting up.
*/
refcount_t refs;
/* dio_bio came from fs/direct-io.c */
struct bio *dio_bio;
/* Array of checksums */
u8 csums[];
};
/* Array of bytes with variable length, hexadecimal format 0x1234 */
#define CSUM_FMT "0x%*phN"
#define CSUM_FMT_VALUE(size, bytes) size, bytes
static inline void btrfs_print_data_csum_error(struct btrfs_inode *inode,
u64 logical_start, u8 *csum, u8 *csum_expected, int mirror_num)
{
struct btrfs_root *root = inode->root;
const u32 csum_size = root->fs_info->csum_size;
/* Output minus objectid, which is more meaningful */
if (root->root_key.objectid >= BTRFS_LAST_FREE_OBJECTID)
btrfs_warn_rl(root->fs_info,
"csum failed root %lld ino %lld off %llu csum " CSUM_FMT " expected csum " CSUM_FMT " mirror %d",
root->root_key.objectid, btrfs_ino(inode),
logical_start,
CSUM_FMT_VALUE(csum_size, csum),
CSUM_FMT_VALUE(csum_size, csum_expected),
mirror_num);
else
btrfs_warn_rl(root->fs_info,
"csum failed root %llu ino %llu off %llu csum " CSUM_FMT " expected csum " CSUM_FMT " mirror %d",
root->root_key.objectid, btrfs_ino(inode),
logical_start,
CSUM_FMT_VALUE(csum_size, csum),
CSUM_FMT_VALUE(csum_size, csum_expected),
mirror_num);
}
#endif