linux-sg2042/drivers/gpio/gpio-wm8994.c

320 lines
7.7 KiB
C
Raw Normal View History

/*
* gpiolib support for Wolfson WM8994
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/regmap.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/gpio.h>
#include <linux/mfd/wm8994/registers.h>
struct wm8994_gpio {
struct wm8994 *wm8994;
struct gpio_chip gpio_chip;
};
static int wm8994_gpio_request(struct gpio_chip *chip, unsigned offset)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
switch (wm8994->type) {
case WM8958:
switch (offset) {
case 1:
case 2:
case 3:
case 4:
case 6:
return -EINVAL;
}
break;
default:
break;
}
return 0;
}
static int wm8994_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
WM8994_GPN_DIR, WM8994_GPN_DIR);
}
static int wm8994_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
int ret;
ret = wm8994_reg_read(wm8994, WM8994_GPIO_1 + offset);
if (ret < 0)
return ret;
if (ret & WM8994_GPN_LVL)
return 1;
else
return 0;
}
static int wm8994_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
if (value)
value = WM8994_GPN_LVL;
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
WM8994_GPN_DIR | WM8994_GPN_LVL, value);
}
static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
if (value)
value = WM8994_GPN_LVL;
wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value);
}
static int wm8994_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long config)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
switch (pinconf_to_config_param(config)) {
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
WM8994_GPN_OP_CFG_MASK,
WM8994_GPN_OP_CFG);
case PIN_CONFIG_DRIVE_PUSH_PULL:
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
WM8994_GPN_OP_CFG_MASK, 0);
default:
break;
}
return -ENOTSUPP;
}
static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
return regmap_irq_get_virq(wm8994->irq_data, offset);
}
#ifdef CONFIG_DEBUG_FS
static const char *wm8994_gpio_fn(u16 fn)
{
switch (fn) {
case WM8994_GP_FN_PIN_SPECIFIC:
return "pin-specific";
case WM8994_GP_FN_GPIO:
return "GPIO";
case WM8994_GP_FN_SDOUT:
return "SDOUT";
case WM8994_GP_FN_IRQ:
return "IRQ";
case WM8994_GP_FN_TEMPERATURE:
return "Temperature";
case WM8994_GP_FN_MICBIAS1_DET:
return "MICBIAS1 detect";
case WM8994_GP_FN_MICBIAS1_SHORT:
return "MICBIAS1 short";
case WM8994_GP_FN_MICBIAS2_DET:
return "MICBIAS2 detect";
case WM8994_GP_FN_MICBIAS2_SHORT:
return "MICBIAS2 short";
case WM8994_GP_FN_FLL1_LOCK:
return "FLL1 lock";
case WM8994_GP_FN_FLL2_LOCK:
return "FLL2 lock";
case WM8994_GP_FN_SRC1_LOCK:
return "SRC1 lock";
case WM8994_GP_FN_SRC2_LOCK:
return "SRC2 lock";
case WM8994_GP_FN_DRC1_ACT:
return "DRC1 activity";
case WM8994_GP_FN_DRC2_ACT:
return "DRC2 activity";
case WM8994_GP_FN_DRC3_ACT:
return "DRC3 activity";
case WM8994_GP_FN_WSEQ_STATUS:
return "Write sequencer";
case WM8994_GP_FN_FIFO_ERROR:
return "FIFO error";
case WM8994_GP_FN_OPCLK:
return "OPCLK";
case WM8994_GP_FN_THW:
return "Thermal warning";
case WM8994_GP_FN_DCS_DONE:
return "DC servo";
case WM8994_GP_FN_FLL1_OUT:
return "FLL1 output";
case WM8994_GP_FN_FLL2_OUT:
return "FLL1 output";
default:
return "Unknown";
}
}
static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct wm8994_gpio *wm8994_gpio = gpiochip_get_data(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
int i;
for (i = 0; i < chip->ngpio; i++) {
int gpio = i + chip->base;
int reg;
const char *label;
/* We report the GPIO even if it's not requested since
* we're also reporting things like alternate
* functions which apply even when the GPIO is not in
* use as a GPIO.
*/
label = gpiochip_is_requested(chip, i);
if (!label)
label = "Unrequested";
seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
reg = wm8994_reg_read(wm8994, WM8994_GPIO_1 + i);
if (reg < 0) {
dev_err(wm8994->dev,
"GPIO control %d read failed: %d\n",
gpio, reg);
seq_printf(s, "\n");
continue;
}
if (reg & WM8994_GPN_DIR)
seq_printf(s, "in ");
else
seq_printf(s, "out ");
if (reg & WM8994_GPN_PU)
seq_printf(s, "pull up ");
if (reg & WM8994_GPN_PD)
seq_printf(s, "pull down ");
if (reg & WM8994_GPN_POL)
seq_printf(s, "inverted ");
else
seq_printf(s, "noninverted ");
if (reg & WM8994_GPN_OP_CFG)
seq_printf(s, "open drain ");
else
seq_printf(s, "push-pull ");
seq_printf(s, "%s (%x)\n",
wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg);
}
}
#else
#define wm8994_gpio_dbg_show NULL
#endif
static const struct gpio_chip template_chip = {
.label = "wm8994",
.owner = THIS_MODULE,
.request = wm8994_gpio_request,
.direction_input = wm8994_gpio_direction_in,
.get = wm8994_gpio_get,
.direction_output = wm8994_gpio_direction_out,
.set = wm8994_gpio_set,
.set_config = wm8994_gpio_set_config,
.to_irq = wm8994_gpio_to_irq,
.dbg_show = wm8994_gpio_dbg_show,
.can_sleep = true,
};
static int wm8994_gpio_probe(struct platform_device *pdev)
{
struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev);
struct wm8994_gpio *wm8994_gpio;
int ret;
wm8994_gpio = devm_kzalloc(&pdev->dev, sizeof(*wm8994_gpio),
GFP_KERNEL);
if (wm8994_gpio == NULL)
return -ENOMEM;
wm8994_gpio->wm8994 = wm8994;
wm8994_gpio->gpio_chip = template_chip;
wm8994_gpio->gpio_chip.ngpio = WM8994_GPIO_MAX;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 16:56:26 +08:00
wm8994_gpio->gpio_chip.parent = &pdev->dev;
if (pdata && pdata->gpio_base)
wm8994_gpio->gpio_chip.base = pdata->gpio_base;
else
wm8994_gpio->gpio_chip.base = -1;
ret = devm_gpiochip_add_data(&pdev->dev, &wm8994_gpio->gpio_chip,
wm8994_gpio);
if (ret < 0) {
dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, wm8994_gpio);
return ret;
}
static struct platform_driver wm8994_gpio_driver = {
.driver.name = "wm8994-gpio",
.probe = wm8994_gpio_probe,
};
static int __init wm8994_gpio_init(void)
{
return platform_driver_register(&wm8994_gpio_driver);
}
subsys_initcall(wm8994_gpio_init);
static void __exit wm8994_gpio_exit(void)
{
platform_driver_unregister(&wm8994_gpio_driver);
}
module_exit(wm8994_gpio_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("GPIO interface for WM8994");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm8994-gpio");