linux-sg2042/drivers/pcmcia/sa1111_badge4.c

167 lines
3.9 KiB
C
Raw Normal View History

/*
* linux/drivers/pcmcia/sa1100_badge4.c
*
* BadgePAD 4 PCMCIA specific routines
*
* Christopher Hoover <ch@hpl.hp.com>
*
* Copyright (C) 2002 Hewlett-Packard Company
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#include "sa1111_generic.h"
/*
* BadgePAD 4 Details
*
* PCM Vcc:
*
* PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
* on JP6) or 5v0 (short pins 3 and 5 on JP6).
*
* PCM Vpp:
*
* PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
* on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B.,
* 12v0 operation requires that the power supply actually supply 12v0
* via pin 7 of JP7.
*
* CF Vcc:
*
* CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
* and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
*
* Unfortunately there's no way programmatically to determine how a
* given board is jumpered. This code assumes a default jumpering
* as described below.
*
* If the defaults aren't correct, you may override them with a pcmv
* setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>. The units are
* tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
* PCM Vpp, and 5v0 CF Vcc.
*
*/
static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */
static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */
static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */
static void complain_about_jumpering(const char *whom,
const char *supply,
int given, int wanted)
{
printk(KERN_ERR
"%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation"
"; re-jumper the board and/or use pcmv=xx,xx,xx\n",
whom, supply,
wanted / 10, wanted % 10,
supply,
given / 10, given % 10);
}
static int
badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
int ret;
switch (skt->nr) {
case 0:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_pcmvcc)) {
complain_about_jumpering(__func__, "pcmvcc",
badge4_pcmvcc, state->Vcc);
// Apply power regardless of the jumpering.
// return -1;
}
if ((state->Vpp != 0) &&
(state->Vpp != badge4_pcmvpp)) {
complain_about_jumpering(__func__, "pcmvpp",
badge4_pcmvpp, state->Vpp);
return -1;
}
break;
case 1:
if ((state->Vcc != 0) &&
(state->Vcc != badge4_cfvcc)) {
complain_about_jumpering(__func__, "cfvcc",
badge4_cfvcc, state->Vcc);
return -1;
}
break;
default:
return -1;
}
ret = sa1111_pcmcia_configure_socket(skt, state);
if (ret == 0) {
unsigned long flags;
int need5V;
local_irq_save(flags);
need5V = ((state->Vcc == 50) || (state->Vpp == 50));
badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V);
local_irq_restore(flags);
}
return ret;
}
static struct pcmcia_low_level badge4_pcmcia_ops = {
.owner = THIS_MODULE,
.configure_socket = badge4_pcmcia_configure_socket,
.first = 0,
.nr = 2,
};
int pcmcia_badge4_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_badge4()) {
printk(KERN_INFO
"%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
__func__,
badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
sa11xx_drv_pcmcia_add_one);
}
return ret;
}
static int __init pcmv_setup(char *s)
{
int v[4];
s = get_options(s, ARRAY_SIZE(v), v);
if (v[0] >= 1) badge4_pcmvcc = v[1];
if (v[0] >= 2) badge4_pcmvpp = v[2];
if (v[0] >= 3) badge4_cfvcc = v[3];
return 1;
}
__setup("pcmv=", pcmv_setup);