linux-sg2042/kernel/acct.c

609 lines
16 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/kernel/acct.c
*
* BSD Process Accounting for Linux
*
* Author: Marco van Wieringen <mvw@planets.elm.net>
*
* Some code based on ideas and code from:
* Thomas K. Dyas <tdyas@eden.rutgers.edu>
*
* This file implements BSD-style process accounting. Whenever any
* process exits, an accounting record of type "struct acct" is
* written to the file specified with the acct() system call. It is
* up to user-level programs to do useful things with the accounting
* log. The kernel just provides the raw accounting information.
*
* (C) Copyright 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
*
* Plugged two leaks. 1) It didn't return acct_file into the free_filps if
* the file happened to be read-only. 2) If the accounting was suspended
* due to the lack of space it happily allowed to reopen it and completely
* lost the old acct_file. 3/10/98, Al Viro.
*
* Now we silently close acct_file on attempt to reopen. Cleaned sys_acct().
* XTerms and EMACS are manifestations of pure evil. 21/10/98, AV.
*
* Fixed a nasty interaction with with sys_umount(). If the accointing
* was suspeneded we failed to stop it on umount(). Messy.
* Another one: remount to readonly didn't stop accounting.
* Question: what should we do if we have CAP_SYS_ADMIN but not
* CAP_SYS_PACCT? Current code does the following: umount returns -EBUSY
* unless we are messing with the root. In that case we are getting a
* real mess with do_remount_sb(). 9/11/98, AV.
*
* Fixed a bunch of races (and pair of leaks). Probably not the best way,
* but this one obviously doesn't introduce deadlocks. Later. BTW, found
* one race (and leak) in BSD implementation.
* OK, that's better. ANOTHER race and leak in BSD variant. There always
* is one more bug... 10/11/98, AV.
*
* Oh, fsck... Oopsable SMP race in do_process_acct() - we must hold
* ->mmap_sem to walk the vma list of current->mm. Nasty, since it leaks
* a struct file opened for write. Fixed. 2/6/2000, AV.
*/
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/acct.h>
#include <linux/capability.h>
#include <linux/file.h>
#include <linux/tty.h>
#include <linux/security.h>
#include <linux/vfs.h>
#include <linux/jiffies.h>
#include <linux/times.h>
#include <linux/syscalls.h>
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
#include <linux/mount.h>
#include <linux/uaccess.h>
#include <linux/sched/cputime.h>
#include <asm/div64.h>
#include <linux/blkdev.h> /* sector_div */
#include <linux/pid_namespace.h>
#include <linux/fs_pin.h>
/*
* These constants control the amount of freespace that suspend and
* resume the process accounting system, and the time delay between
* each check.
* Turned into sysctl-controllable parameters. AV, 12/11/98
*/
int acct_parm[3] = {4, 2, 30};
#define RESUME (acct_parm[0]) /* >foo% free space - resume */
#define SUSPEND (acct_parm[1]) /* <foo% free space - suspend */
#define ACCT_TIMEOUT (acct_parm[2]) /* foo second timeout between checks */
/*
* External references and all of the globals.
*/
struct bsd_acct_struct {
struct fs_pin pin;
atomic_long_t count;
struct rcu_head rcu;
struct mutex lock;
int active;
unsigned long needcheck;
struct file *file;
struct pid_namespace *ns;
struct work_struct work;
struct completion done;
};
static void do_acct_process(struct bsd_acct_struct *acct);
/*
* Check the amount of free space and suspend/resume accordingly.
*/
static int check_free_space(struct bsd_acct_struct *acct)
{
struct kstatfs sbuf;
if (time_is_after_jiffies(acct->needcheck))
goto out;
/* May block */
if (vfs_statfs(&acct->file->f_path, &sbuf))
goto out;
if (acct->active) {
u64 suspend = sbuf.f_blocks * SUSPEND;
do_div(suspend, 100);
if (sbuf.f_bavail <= suspend) {
acct->active = 0;
pr_info("Process accounting paused\n");
}
} else {
u64 resume = sbuf.f_blocks * RESUME;
do_div(resume, 100);
if (sbuf.f_bavail >= resume) {
acct->active = 1;
pr_info("Process accounting resumed\n");
}
}
acct->needcheck = jiffies + ACCT_TIMEOUT*HZ;
out:
return acct->active;
}
static void acct_put(struct bsd_acct_struct *p)
{
if (atomic_long_dec_and_test(&p->count))
kfree_rcu(p, rcu);
}
static inline struct bsd_acct_struct *to_acct(struct fs_pin *p)
{
return p ? container_of(p, struct bsd_acct_struct, pin) : NULL;
}
static struct bsd_acct_struct *acct_get(struct pid_namespace *ns)
{
struct bsd_acct_struct *res;
again:
smp_rmb();
rcu_read_lock();
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 05:07:29 +08:00
res = to_acct(READ_ONCE(ns->bacct));
if (!res) {
rcu_read_unlock();
return NULL;
}
if (!atomic_long_inc_not_zero(&res->count)) {
rcu_read_unlock();
cpu_relax();
goto again;
}
rcu_read_unlock();
mutex_lock(&res->lock);
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 05:07:29 +08:00
if (res != to_acct(READ_ONCE(ns->bacct))) {
mutex_unlock(&res->lock);
acct_put(res);
goto again;
}
return res;
}
static void acct_pin_kill(struct fs_pin *pin)
{
struct bsd_acct_struct *acct = to_acct(pin);
mutex_lock(&acct->lock);
do_acct_process(acct);
schedule_work(&acct->work);
wait_for_completion(&acct->done);
cmpxchg(&acct->ns->bacct, pin, NULL);
mutex_unlock(&acct->lock);
pin_remove(pin);
acct_put(acct);
}
static void close_work(struct work_struct *work)
{
struct bsd_acct_struct *acct = container_of(work, struct bsd_acct_struct, work);
struct file *file = acct->file;
if (file->f_op->flush)
file->f_op->flush(file, NULL);
__fput_sync(file);
complete(&acct->done);
}
static int acct_on(struct filename *pathname)
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
{
struct file *file;
struct vfsmount *mnt, *internal;
struct pid_namespace *ns = task_active_pid_ns(current);
struct bsd_acct_struct *acct;
struct fs_pin *old;
int err;
acct = kzalloc(sizeof(struct bsd_acct_struct), GFP_KERNEL);
if (!acct)
return -ENOMEM;
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
/* Difference from BSD - they don't do O_APPEND */
file = file_open_name(pathname, O_WRONLY|O_APPEND|O_LARGEFILE, 0);
if (IS_ERR(file)) {
kfree(acct);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
return PTR_ERR(file);
}
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
if (!S_ISREG(file_inode(file)->i_mode)) {
kfree(acct);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
filp_close(file, NULL);
return -EACCES;
}
if (!(file->f_mode & FMODE_CAN_WRITE)) {
kfree(acct);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
filp_close(file, NULL);
return -EIO;
}
internal = mnt_clone_internal(&file->f_path);
if (IS_ERR(internal)) {
kfree(acct);
filp_close(file, NULL);
return PTR_ERR(internal);
}
err = __mnt_want_write(internal);
if (err) {
mntput(internal);
kfree(acct);
filp_close(file, NULL);
return err;
}
mnt = file->f_path.mnt;
file->f_path.mnt = internal;
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
atomic_long_set(&acct->count, 1);
init_fs_pin(&acct->pin, acct_pin_kill);
acct->file = file;
acct->needcheck = jiffies;
acct->ns = ns;
mutex_init(&acct->lock);
INIT_WORK(&acct->work, close_work);
init_completion(&acct->done);
mutex_lock_nested(&acct->lock, 1); /* nobody has seen it yet */
pin_insert(&acct->pin, mnt);
rcu_read_lock();
old = xchg(&ns->bacct, &acct->pin);
mutex_unlock(&acct->lock);
pin_kill(old);
__mnt_drop_write(mnt);
mntput(mnt);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
return 0;
}
static DEFINE_MUTEX(acct_on_mutex);
/**
* sys_acct - enable/disable process accounting
* @name: file name for accounting records or NULL to shutdown accounting
*
* Returns 0 for success or negative errno values for failure.
*
* sys_acct() is the only system call needed to implement process
* accounting. It takes the name of the file where accounting records
* should be written. If the filename is NULL, accounting will be
* shutdown.
*/
SYSCALL_DEFINE1(acct, const char __user *, name)
{
int error = 0;
if (!capable(CAP_SYS_PACCT))
return -EPERM;
if (name) {
struct filename *tmp = getname(name);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
if (IS_ERR(tmp))
return PTR_ERR(tmp);
mutex_lock(&acct_on_mutex);
error = acct_on(tmp);
mutex_unlock(&acct_on_mutex);
putname(tmp);
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
} else {
rcu_read_lock();
pin_kill(task_active_pid_ns(current)->bacct);
}
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-08 06:13:39 +08:00
return error;
}
void acct_exit_ns(struct pid_namespace *ns)
{
rcu_read_lock();
pin_kill(ns->bacct);
}
/*
* encode an unsigned long into a comp_t
*
* This routine has been adopted from the encode_comp_t() function in
* the kern_acct.c file of the FreeBSD operating system. The encoding
* is a 13-bit fraction with a 3-bit (base 8) exponent.
*/
#define MANTSIZE 13 /* 13 bit mantissa. */
#define EXPSIZE 3 /* Base 8 (3 bit) exponent. */
#define MAXFRACT ((1 << MANTSIZE) - 1) /* Maximum fractional value. */
static comp_t encode_comp_t(unsigned long value)
{
int exp, rnd;
exp = rnd = 0;
while (value > MAXFRACT) {
rnd = value & (1 << (EXPSIZE - 1)); /* Round up? */
value >>= EXPSIZE; /* Base 8 exponent == 3 bit shift. */
exp++;
}
/*
* If we need to round up, do it (and handle overflow correctly).
*/
if (rnd && (++value > MAXFRACT)) {
value >>= EXPSIZE;
exp++;
}
/*
* Clean it up and polish it off.
*/
exp <<= MANTSIZE; /* Shift the exponent into place */
exp += value; /* and add on the mantissa. */
return exp;
}
#if ACCT_VERSION == 1 || ACCT_VERSION == 2
/*
* encode an u64 into a comp2_t (24 bits)
*
* Format: 5 bit base 2 exponent, 20 bits mantissa.
* The leading bit of the mantissa is not stored, but implied for
* non-zero exponents.
* Largest encodable value is 50 bits.
*/
#define MANTSIZE2 20 /* 20 bit mantissa. */
#define EXPSIZE2 5 /* 5 bit base 2 exponent. */
#define MAXFRACT2 ((1ul << MANTSIZE2) - 1) /* Maximum fractional value. */
#define MAXEXP2 ((1 << EXPSIZE2) - 1) /* Maximum exponent. */
static comp2_t encode_comp2_t(u64 value)
{
int exp, rnd;
exp = (value > (MAXFRACT2>>1));
rnd = 0;
while (value > MAXFRACT2) {
rnd = value & 1;
value >>= 1;
exp++;
}
/*
* If we need to round up, do it (and handle overflow correctly).
*/
if (rnd && (++value > MAXFRACT2)) {
value >>= 1;
exp++;
}
if (exp > MAXEXP2) {
/* Overflow. Return largest representable number instead. */
return (1ul << (MANTSIZE2+EXPSIZE2-1)) - 1;
} else {
return (value & (MAXFRACT2>>1)) | (exp << (MANTSIZE2-1));
}
}
#endif
#if ACCT_VERSION == 3
/*
* encode an u64 into a 32 bit IEEE float
*/
static u32 encode_float(u64 value)
{
unsigned exp = 190;
unsigned u;
if (value == 0)
return 0;
while ((s64)value > 0) {
value <<= 1;
exp--;
}
u = (u32)(value >> 40) & 0x7fffffu;
return u | (exp << 23);
}
#endif
/*
* Write an accounting entry for an exiting process
*
* The acct_process() call is the workhorse of the process
* accounting system. The struct acct is built here and then written
* into the accounting file. This function should only be called from
* do_exit() or when switching to a different output file.
*/
static void fill_ac(acct_t *ac)
{
struct pacct_struct *pacct = &current->signal->pacct;
u64 elapsed, run_time;
time64_t btime;
[PATCH] tty: ->signal->tty locking Fix the locking of signal->tty. Use ->sighand->siglock to protect ->signal->tty; this lock is already used by most other members of ->signal/->sighand. And unless we are 'current' or the tasklist_lock is held we need ->siglock to access ->signal anyway. (NOTE: sys_unshare() is broken wrt ->sighand locking rules) Note that tty_mutex is held over tty destruction, so while holding tty_mutex any tty pointer remains valid. Otherwise the lifetime of ttys are governed by their open file handles. This leaves some holes for tty access from signal->tty (or any other non file related tty access). It solves the tty SLAB scribbles we were seeing. (NOTE: the change from group_send_sig_info to __group_send_sig_info needs to be examined by someone familiar with the security framework, I think it is safe given the SEND_SIG_PRIV from other __group_send_sig_info invocations) [schwidefsky@de.ibm.com: 3270 fix] [akpm@osdl.org: various post-viro fixes] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Alan Cox <alan@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Roland McGrath <roland@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 18:36:04 +08:00
struct tty_struct *tty;
/*
* Fill the accounting struct with the needed info as recorded
* by the different kernel functions.
*/
memset(ac, 0, sizeof(acct_t));
ac->ac_version = ACCT_VERSION | ACCT_BYTEORDER;
strlcpy(ac->ac_comm, current->comm, sizeof(ac->ac_comm));
/* calculate run_time in nsec*/
run_time = ktime_get_ns();
run_time -= current->group_leader->start_time;
/* convert nsec -> AHZ */
elapsed = nsec_to_AHZ(run_time);
#if ACCT_VERSION == 3
ac->ac_etime = encode_float(elapsed);
#else
ac->ac_etime = encode_comp_t(elapsed < (unsigned long) -1l ?
(unsigned long) elapsed : (unsigned long) -1l);
#endif
#if ACCT_VERSION == 1 || ACCT_VERSION == 2
{
/* new enlarged etime field */
comp2_t etime = encode_comp2_t(elapsed);
ac->ac_etime_hi = etime >> 16;
ac->ac_etime_lo = (u16) etime;
}
#endif
do_div(elapsed, AHZ);
btime = ktime_get_real_seconds() - elapsed;
ac->ac_btime = clamp_t(time64_t, btime, 0, U32_MAX);
#if ACCT_VERSION==2
ac->ac_ahz = AHZ;
#endif
spin_lock_irq(&current->sighand->siglock);
tty = current->signal->tty; /* Safe as we hold the siglock */
ac->ac_tty = tty ? old_encode_dev(tty_devnum(tty)) : 0;
ac->ac_utime = encode_comp_t(nsec_to_AHZ(pacct->ac_utime));
ac->ac_stime = encode_comp_t(nsec_to_AHZ(pacct->ac_stime));
ac->ac_flag = pacct->ac_flag;
ac->ac_mem = encode_comp_t(pacct->ac_mem);
ac->ac_minflt = encode_comp_t(pacct->ac_minflt);
ac->ac_majflt = encode_comp_t(pacct->ac_majflt);
ac->ac_exitcode = pacct->ac_exitcode;
spin_unlock_irq(&current->sighand->siglock);
}
/*
* do_acct_process does all actual work. Caller holds the reference to file.
*/
static void do_acct_process(struct bsd_acct_struct *acct)
{
acct_t ac;
unsigned long flim;
const struct cred *orig_cred;
struct file *file = acct->file;
/*
* Accounting records are not subject to resource limits.
*/
flim = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
current->signal->rlim[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY;
/* Perform file operations on behalf of whoever enabled accounting */
orig_cred = override_creds(file->f_cred);
/*
* First check to see if there is enough free_space to continue
* the process accounting system.
*/
if (!check_free_space(acct))
goto out;
fill_ac(&ac);
/* we really need to bite the bullet and change layout */
ac.ac_uid = from_kuid_munged(file->f_cred->user_ns, orig_cred->uid);
ac.ac_gid = from_kgid_munged(file->f_cred->user_ns, orig_cred->gid);
#if ACCT_VERSION == 1 || ACCT_VERSION == 2
/* backward-compatible 16 bit fields */
ac.ac_uid16 = ac.ac_uid;
ac.ac_gid16 = ac.ac_gid;
#endif
#if ACCT_VERSION == 3
{
struct pid_namespace *ns = acct->ns;
ac.ac_pid = task_tgid_nr_ns(current, ns);
rcu_read_lock();
ac.ac_ppid = task_tgid_nr_ns(rcu_dereference(current->real_parent),
ns);
rcu_read_unlock();
}
#endif
/*
* Get freeze protection. If the fs is frozen, just skip the write
* as we could deadlock the system otherwise.
*/
if (file_start_write_trylock(file)) {
/* it's been opened O_APPEND, so position is irrelevant */
loff_t pos = 0;
__kernel_write(file, &ac, sizeof(acct_t), &pos);
file_end_write(file);
}
out:
current->signal->rlim[RLIMIT_FSIZE].rlim_cur = flim;
revert_creds(orig_cred);
}
/**
* acct_collect - collect accounting information into pacct_struct
* @exitcode: task exit code
* @group_dead: not 0, if this thread is the last one in the process.
*/
void acct_collect(long exitcode, int group_dead)
{
struct pacct_struct *pacct = &current->signal->pacct;
u64 utime, stime;
unsigned long vsize = 0;
if (group_dead && current->mm) {
struct vm_area_struct *vma;
down_read(&current->mm->mmap_sem);
vma = current->mm->mmap;
while (vma) {
vsize += vma->vm_end - vma->vm_start;
vma = vma->vm_next;
}
up_read(&current->mm->mmap_sem);
}
spin_lock_irq(&current->sighand->siglock);
if (group_dead)
pacct->ac_mem = vsize / 1024;
if (thread_group_leader(current)) {
pacct->ac_exitcode = exitcode;
if (current->flags & PF_FORKNOEXEC)
pacct->ac_flag |= AFORK;
}
if (current->flags & PF_SUPERPRIV)
pacct->ac_flag |= ASU;
if (current->flags & PF_DUMPCORE)
pacct->ac_flag |= ACORE;
if (current->flags & PF_SIGNALED)
pacct->ac_flag |= AXSIG;
task_cputime(current, &utime, &stime);
pacct->ac_utime += utime;
pacct->ac_stime += stime;
pacct->ac_minflt += current->min_flt;
pacct->ac_majflt += current->maj_flt;
spin_unlock_irq(&current->sighand->siglock);
}
static void slow_acct_process(struct pid_namespace *ns)
{
for ( ; ns; ns = ns->parent) {
struct bsd_acct_struct *acct = acct_get(ns);
if (acct) {
do_acct_process(acct);
mutex_unlock(&acct->lock);
acct_put(acct);
}
}
}
/**
* acct_process
*
* handles process accounting for an exiting task
*/
void acct_process(void)
{
struct pid_namespace *ns;
/*
* This loop is safe lockless, since current is still
* alive and holds its namespace, which in turn holds
* its parent.
*/
for (ns = task_active_pid_ns(current); ns != NULL; ns = ns->parent) {
if (ns->bacct)
break;
}
if (unlikely(ns))
slow_acct_process(ns);
}