hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/iio/proximity/Kconfig

127 lines
3.4 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:07:45 +08:00
# SPDX-License-Identifier: GPL-2.0-only
iio: Add AS3935 lightning sensor support AS3935 chipset can detect lightning strikes and reports those back as events and the estimated distance to the storm. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-03 20:53:00 +08:00
#
# Proximity sensors
#
menu "Lightning sensors"
config AS3935
tristate "AS3935 Franklin lightning sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on SPI
help
Say Y here to build SPI interface support for the Austrian
Microsystems AS3935 lightning detection sensor.
To compile this driver as a module, choose M here: the
module will be called as3935
endmenu
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-29 20:41:14 +08:00
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-26 03:07:19 +08:00
menu "Proximity and distance sensors"
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-29 20:41:14 +08:00
iio: light: isl29501: Add support for the ISL29501 ToF sensor. This patch adds support for the ISL29501 Time of Flight sensor. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-21 01:34:26 +08:00
config ISL29501
tristate "Intersil ISL29501 Time Of Flight sensor"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select IIO_KFIFO_BUF
help
Say Y here if you want to build a driver for the Intersil ISL29501
Time of Flight sensor.
To compile this driver as a module, choose M here: the module will be
called isl29501.
iio: proximity: add support for PulsedLight LIDAR Add support for the PulsedLight LIDAR rangefinder sensor which allows high speed (over 300Hz) distance measurements using Barker Coding within 40 meter range. Support only tested on the "blue label" rev 2, but may work using low sample frequencies on the original version. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-18 22:40:38 +08:00
config LIDAR_LITE_V2
tristate "PulsedLight LIDAR sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
depends on I2C
help
Say Y to build a driver for PulsedLight LIDAR range finding
sensor.
To compile this driver as a module, choose M here: the
module will be called pulsedlight-lite-v2
mb1232.c: add distance iio sensor with i2c Add I2CXL-MaxSonar ultrasonic distance sensors of types mb1202, mb1212, mb1222, mb1232, mb1242, mb7040, mb7137 using an i2c interface Implemented functionality: - reading the distance via in_distance_raw - buffered mode with trigger - make use of interrupt to announce completion of ranging Add mb1232 driver to Kconfig and Makefile Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-03-18 04:38:03 +08:00
config MB1232
tristate "MaxSonar I2CXL family ultrasonic sensors"
depends on I2C
help
Say Y to build a driver for the ultrasonic sensors I2CXL of
MaxBotix which have an i2c interface. It can be used to measure
the distance of objects. Supported types are mb1202, mb1212,
mb1222, mb1232, mb1242, mb7040, mb7137
To compile this driver as a module, choose M here: the
module will be called mb1232.
iio: proximity: Add rfd77402 driver Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with millimeter precision Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-10 21:48:47 +08:00
config RFD77402
tristate "RFD77402 ToF sensor"
depends on I2C
help
Say Y to build a driver for the RFD77420 Time-of-Flight (distance)
sensor module with I2C interface.
To compile this driver as a module, choose M here: the
module will be called rfd77402.
iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-01 02:03:45 +08:00
config SRF04
Kconfig: change configuration of srf04 ultrasonic iio sensor reword configuration option for SRF04 list supported types in help text Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-10 03:11:28 +08:00
tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)"
iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-01 02:03:45 +08:00
depends on GPIOLIB
help
Kconfig: change configuration of srf04 ultrasonic iio sensor reword configuration option for SRF04 list supported types in help text Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-10 03:11:28 +08:00
Say Y here to build a driver for GPIO bitbanged ultrasonic
iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-01 02:03:45 +08:00
ranger sensor. This driver can be used to measure the distance
of objects. It is using two GPIOs.
Kconfig: change configuration of srf04 ultrasonic iio sensor reword configuration option for SRF04 list supported types in help text Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-10 03:11:28 +08:00
Actually Supported types are:
- Devantech SRF04
- Maxbotix mb1000
- Maxbotix mb1010
- Maxbotix mb1020
- Maxbotix mb1030
- Maxbotix mb1040
iio: distance: add devantech us ranger srf04 This patch adds support for the ultrasonic ranger srf04 of devantech. This device is measuring the distance of objects in a range between 1 cm and 3 meters and a theoretical resolution of 3 mm. There are two GPIOs used: - trigger: set as output to the device when the measurement should start - echo: set by the device when the ultrasonic wave is sent out and reset when the echo is recognized; this needs to be an interrupt input The time between setting and resetting the echo pin is the time the waveform needed for one round trip. This time is recorded in the interrupt handler. The distance is calculated in the read function by using the ultrasonic speed at 20 degrees celsius which is about 343 m/s. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-01 02:03:45 +08:00
To compile this driver as a module, choose M here: the
module will be called srf04.
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-29 20:41:14 +08:00
config SX9500
tristate "SX9500 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
depends on I2C
help
Say Y here to build a driver for Semtech's SX9500 capacitive
proximity/button sensor.
To compile this driver as a module, choose M here: the
module will be called sx9500.
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-26 03:07:19 +08:00
config SRF08
iio: srf08: add support for srf02 in i2c mode srf02 added with support for i2c interface Attributes for setting max range or sensitivity are omitted for the case of srf02 type sensor, because they are not supported by the hardware. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-17 03:34:54 +08:00
tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined Functions for triggered buffer support are needed by this module. If they are not defined accidentally by another driver, there's an error thrown out while linking. Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Fixes: a83195937151 ("iio: srf08: add triggered buffer support") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-02 04:49:24 +08:00
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-26 03:07:19 +08:00
depends on I2C
help
iio: srf08: add support for srf02 in i2c mode srf02 added with support for i2c interface Attributes for setting max range or sensitivity are omitted for the case of srf02 type sensor, because they are not supported by the hardware. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-17 03:34:54 +08:00
Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
ultrasonic ranger sensors with i2c interface.
This driver can be used to measure the distance of objects.
iio: distance: srf08: add IIO driver for us ranger This is the IIO driver for devantech srf08 ultrasonic ranger which can be used to measure the distances to an object. The sensor supports I2C with some registers. Supported Features include: - read the distance in ranging mode in centimeters - output of the driver is directly the read value - together with the scale the driver delivers the distance in meters - only the first echo of the nearest object is delivered - set sensitivity as analog value in the range of 0-31 means setting gain register on device - set range registers; userspace enters max. range in millimeters in 43 mm steps Features not supported by this driver: - ranging mode in inches or in microseconds - ANN mode - change I2C address through this driver - light sensor The driver was added in the directory "proximity" of the iio subsystem and the menu in den config is now called "Proximity and distance sensors" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-26 03:07:19 +08:00
To compile this driver as a module, choose M here: the
module will be called srf08.
iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor. This driver was originally written by ST in 2016 as a misc input device driver, and hasn't been maintained for a long time. I grabbed some code from it's API and reformed it into an iio proximity device driver. This version of driver uses i2c bus to talk to the sensor and polling for measuring completes, so no irq line is needed. It can be tested with reading from /sys/bus/iio/devices/iio:deviceX/in_distance_input Signed-off-by: Song Qiang <songqiang1304521@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-18 16:24:21 +08:00
config VL53L0X_I2C
tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
depends on I2C
help
Say Y here to build a driver for STMicroelectronics VL53L0X
ToF ranger sensors with i2c interface.
This driver can be used to measure the distance of objects.
To compile this driver as a module, choose M here: the
module will be called vl53l0x-i2c.
iio: driver for Semtech SX9500 proximity solution Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-29 20:41:14 +08:00
endmenu