linux-sg2042/drivers/thermal/armada_thermal.c

321 lines
7.9 KiB
C
Raw Normal View History

/*
* Marvell Armada 370/XP thermal sensor driver
*
* Copyright (C) 2013 Marvell
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/thermal.h>
#define THERMAL_VALID_MASK 0x1
/* Thermal Manager Control and Status Register */
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
#define PMU_TM_DISABLE_OFFS 0
#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
#define PMU_TDC0_REF_CAL_CNT_OFFS 11
#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
#define A375_UNIT_CONTROL_SHIFT 27
#define A375_UNIT_CONTROL_MASK 0x7
#define A375_READOUT_INVERT BIT(15)
#define A375_HW_RESETn BIT(8)
#define A380_HW_RESET BIT(8)
struct armada_thermal_data;
/* Marvell EBU Thermal Sensor Dev Structure */
struct armada_thermal_priv {
void __iomem *sensor;
void __iomem *control;
struct armada_thermal_data *data;
};
struct armada_thermal_data {
/* Initialize the sensor */
void (*init_sensor)(struct platform_device *pdev,
struct armada_thermal_priv *);
/* Test for a valid sensor value (optional) */
bool (*is_valid)(struct armada_thermal_priv *);
/* Formula coeficients: temp = (b + m * reg) / div */
unsigned long coef_b;
unsigned long coef_m;
unsigned long coef_div;
bool inverted;
/* Register shift and mask to access the sensor temperature */
unsigned int temp_shift;
unsigned int temp_mask;
unsigned int is_valid_shift;
};
static void armadaxp_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
unsigned long reg;
reg = readl_relaxed(priv->control);
reg |= PMU_TDC0_OTF_CAL_MASK;
writel(reg, priv->control);
/* Reference calibration value */
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
writel(reg, priv->control);
/* Reset the sensor */
reg = readl_relaxed(priv->control);
writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
writel(reg, priv->control);
/* Enable the sensor */
reg = readl_relaxed(priv->sensor);
reg &= ~PMU_TM_DISABLE_MASK;
writel(reg, priv->sensor);
}
static void armada370_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
unsigned long reg;
reg = readl_relaxed(priv->control);
reg |= PMU_TDC0_OTF_CAL_MASK;
writel(reg, priv->control);
/* Reference calibration value */
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
writel(reg, priv->control);
reg &= ~PMU_TDC0_START_CAL_MASK;
writel(reg, priv->control);
mdelay(10);
}
static void armada375_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
unsigned long reg;
reg = readl(priv->control + 4);
reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
reg &= ~A375_READOUT_INVERT;
reg &= ~A375_HW_RESETn;
writel(reg, priv->control + 4);
mdelay(20);
reg |= A375_HW_RESETn;
writel(reg, priv->control + 4);
mdelay(50);
}
static void armada380_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
unsigned long reg = readl_relaxed(priv->control);
/* Reset hardware once */
if (!(reg & A380_HW_RESET)) {
reg |= A380_HW_RESET;
writel(reg, priv->control);
mdelay(10);
}
}
static bool armada_is_valid(struct armada_thermal_priv *priv)
{
unsigned long reg = readl_relaxed(priv->sensor);
return (reg >> priv->data->is_valid_shift) & THERMAL_VALID_MASK;
}
static int armada_get_temp(struct thermal_zone_device *thermal,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int *temp)
{
struct armada_thermal_priv *priv = thermal->devdata;
unsigned long reg;
unsigned long m, b, div;
/* Valid check */
if (priv->data->is_valid && !priv->data->is_valid(priv)) {
dev_err(&thermal->device,
"Temperature sensor reading not valid\n");
return -EIO;
}
reg = readl_relaxed(priv->sensor);
reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
/* Get formula coeficients */
b = priv->data->coef_b;
m = priv->data->coef_m;
div = priv->data->coef_div;
if (priv->data->inverted)
*temp = ((m * reg) - b) / div;
else
*temp = (b - (m * reg)) / div;
return 0;
}
static struct thermal_zone_device_ops ops = {
.get_temp = armada_get_temp,
};
static const struct armada_thermal_data armadaxp_data = {
.init_sensor = armadaxp_init_sensor,
.temp_shift = 10,
.temp_mask = 0x1ff,
.coef_b = 3153000000UL,
.coef_m = 10000000UL,
.coef_div = 13825,
};
static const struct armada_thermal_data armada370_data = {
.is_valid = armada_is_valid,
.init_sensor = armada370_init_sensor,
.is_valid_shift = 9,
.temp_shift = 10,
.temp_mask = 0x1ff,
.coef_b = 3153000000UL,
.coef_m = 10000000UL,
.coef_div = 13825,
};
static const struct armada_thermal_data armada375_data = {
.is_valid = armada_is_valid,
.init_sensor = armada375_init_sensor,
.is_valid_shift = 10,
.temp_shift = 0,
.temp_mask = 0x1ff,
.coef_b = 3171900000UL,
.coef_m = 10000000UL,
.coef_div = 13616,
};
static const struct armada_thermal_data armada380_data = {
.is_valid = armada_is_valid,
.init_sensor = armada380_init_sensor,
.is_valid_shift = 10,
.temp_shift = 0,
.temp_mask = 0x3ff,
.coef_b = 1172499100UL,
.coef_m = 2000096UL,
.coef_div = 4201,
.inverted = true,
};
static const struct of_device_id armada_thermal_id_table[] = {
{
.compatible = "marvell,armadaxp-thermal",
.data = &armadaxp_data,
},
{
.compatible = "marvell,armada370-thermal",
.data = &armada370_data,
},
{
.compatible = "marvell,armada375-thermal",
.data = &armada375_data,
},
{
.compatible = "marvell,armada380-thermal",
.data = &armada380_data,
},
{
/* sentinel */
},
};
MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
static int armada_thermal_probe(struct platform_device *pdev)
{
struct thermal_zone_device *thermal;
const struct of_device_id *match;
struct armada_thermal_priv *priv;
struct resource *res;
match = of_match_device(armada_thermal_id_table, &pdev->dev);
if (!match)
return -ENODEV;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->sensor = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->sensor))
return PTR_ERR(priv->sensor);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
priv->control = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->control))
return PTR_ERR(priv->control);
priv->data = (struct armada_thermal_data *)match->data;
priv->data->init_sensor(pdev, priv);
thermal = thermal_zone_device_register("armada_thermal", 0, 0,
priv, &ops, NULL, 0, 0);
if (IS_ERR(thermal)) {
dev_err(&pdev->dev,
"Failed to register thermal zone device\n");
return PTR_ERR(thermal);
}
platform_set_drvdata(pdev, thermal);
return 0;
}
static int armada_thermal_exit(struct platform_device *pdev)
{
struct thermal_zone_device *armada_thermal =
platform_get_drvdata(pdev);
thermal_zone_device_unregister(armada_thermal);
return 0;
}
static struct platform_driver armada_thermal_driver = {
.probe = armada_thermal_probe,
.remove = armada_thermal_exit,
.driver = {
.name = "armada_thermal",
.of_match_table = armada_thermal_id_table,
},
};
module_platform_driver(armada_thermal_driver);
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
MODULE_DESCRIPTION("Armada 370/XP thermal driver");
MODULE_LICENSE("GPL v2");