linux-sg2042/kernel/power/main.c

645 lines
15 KiB
C
Raw Normal View History

/*
* kernel/power/main.c - PM subsystem core functionality.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
*
* This file is released under the GPLv2
*
*/
#include <linux/export.h>
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/resume-trace.h>
#include <linux/workqueue.h>
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-11 05:01:26 +08:00
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include "power.h"
DEFINE_MUTEX(pm_mutex);
#ifdef CONFIG_PM_SLEEP
/* Routines for PM-transition notifications */
static BLOCKING_NOTIFIER_HEAD(pm_chain_head);
int register_pm_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&pm_chain_head, nb);
}
EXPORT_SYMBOL_GPL(register_pm_notifier);
int unregister_pm_notifier(struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&pm_chain_head, nb);
}
EXPORT_SYMBOL_GPL(unregister_pm_notifier);
int pm_notifier_call_chain(unsigned long val)
{
int ret = blocking_notifier_call_chain(&pm_chain_head, val, NULL);
return notifier_to_errno(ret);
}
/* If set, devices may be suspended and resumed asynchronously. */
int pm_async_enabled = 1;
static ssize_t pm_async_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", pm_async_enabled);
}
static ssize_t pm_async_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
unsigned long val;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
if (val > 1)
return -EINVAL;
pm_async_enabled = val;
return n;
}
power_attr(pm_async);
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
#ifdef CONFIG_PM_DEBUG
int pm_test_level = TEST_NONE;
static const char * const pm_tests[__TEST_AFTER_LAST] = {
[TEST_NONE] = "none",
[TEST_CORE] = "core",
[TEST_CPUS] = "processors",
[TEST_PLATFORM] = "platform",
[TEST_DEVICES] = "devices",
[TEST_FREEZER] = "freezer",
};
static ssize_t pm_test_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
{
char *s = buf;
int level;
for (level = TEST_FIRST; level <= TEST_MAX; level++)
if (pm_tests[level]) {
if (level == pm_test_level)
s += sprintf(s, "[%s] ", pm_tests[level]);
else
s += sprintf(s, "%s ", pm_tests[level]);
}
if (s != buf)
/* convert the last space to a newline */
*(s-1) = '\n';
return (s - buf);
}
static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
{
const char * const *s;
int level;
char *p;
int len;
int error = -EINVAL;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
lock_system_sleep();
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
level = TEST_FIRST;
for (s = &pm_tests[level]; level <= TEST_MAX; s++, level++)
if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) {
pm_test_level = level;
error = 0;
break;
}
unlock_system_sleep();
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
return error ? error : n;
}
power_attr(pm_test);
#endif /* CONFIG_PM_DEBUG */
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-11 05:01:26 +08:00
#ifdef CONFIG_DEBUG_FS
static char *suspend_step_name(enum suspend_stat_step step)
{
switch (step) {
case SUSPEND_FREEZE:
return "freeze";
case SUSPEND_PREPARE:
return "prepare";
case SUSPEND_SUSPEND:
return "suspend";
case SUSPEND_SUSPEND_NOIRQ:
return "suspend_noirq";
case SUSPEND_RESUME_NOIRQ:
return "resume_noirq";
case SUSPEND_RESUME:
return "resume";
default:
return "";
}
}
static int suspend_stats_show(struct seq_file *s, void *unused)
{
int i, index, last_dev, last_errno, last_step;
last_dev = suspend_stats.last_failed_dev + REC_FAILED_NUM - 1;
last_dev %= REC_FAILED_NUM;
last_errno = suspend_stats.last_failed_errno + REC_FAILED_NUM - 1;
last_errno %= REC_FAILED_NUM;
last_step = suspend_stats.last_failed_step + REC_FAILED_NUM - 1;
last_step %= REC_FAILED_NUM;
PM / Sleep: Introduce "late suspend" and "early resume" of devices The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-01-30 03:38:29 +08:00
seq_printf(s, "%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n"
"%s: %d\n%s: %d\n%s: %d\n%s: %d\n%s: %d\n",
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-11 05:01:26 +08:00
"success", suspend_stats.success,
"fail", suspend_stats.fail,
"failed_freeze", suspend_stats.failed_freeze,
"failed_prepare", suspend_stats.failed_prepare,
"failed_suspend", suspend_stats.failed_suspend,
PM / Sleep: Introduce "late suspend" and "early resume" of devices The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-01-30 03:38:29 +08:00
"failed_suspend_late",
suspend_stats.failed_suspend_late,
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-11 05:01:26 +08:00
"failed_suspend_noirq",
suspend_stats.failed_suspend_noirq,
"failed_resume", suspend_stats.failed_resume,
PM / Sleep: Introduce "late suspend" and "early resume" of devices The current device suspend/resume phases during system-wide power transitions appear to be insufficient for some platforms that want to use the same callback routines for saving device states and related operations during runtime suspend/resume as well as during system suspend/resume. In principle, they could point their .suspend_noirq() and .resume_noirq() to the same callback routines as their .runtime_suspend() and .runtime_resume(), respectively, but at least some of them require device interrupts to be enabled while the code in those routines is running. It also makes sense to have device suspend-resume callbacks that will be executed with runtime PM disabled and with device interrupts enabled in case someone needs to run some special code in that context during system-wide power transitions. Apart from this, .suspend_noirq() and .resume_noirq() were introduced as a workaround for drivers using shared interrupts and failing to prevent their interrupt handlers from accessing suspended hardware. It appears to be better not to use them for other porposes, or we may have to deal with some serious confusion (which seems to be happening already). For the above reasons, introduce new device suspend/resume phases, "late suspend" and "early resume" (and analogously for hibernation) whose callback will be executed with runtime PM disabled and with device interrupts enabled and whose callback pointers generally may point to runtime suspend/resume routines. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
2012-01-30 03:38:29 +08:00
"failed_resume_early",
suspend_stats.failed_resume_early,
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-11 05:01:26 +08:00
"failed_resume_noirq",
suspend_stats.failed_resume_noirq);
seq_printf(s, "failures:\n last_failed_dev:\t%-s\n",
suspend_stats.failed_devs[last_dev]);
for (i = 1; i < REC_FAILED_NUM; i++) {
index = last_dev + REC_FAILED_NUM - i;
index %= REC_FAILED_NUM;
seq_printf(s, "\t\t\t%-s\n",
suspend_stats.failed_devs[index]);
}
seq_printf(s, " last_failed_errno:\t%-d\n",
suspend_stats.errno[last_errno]);
for (i = 1; i < REC_FAILED_NUM; i++) {
index = last_errno + REC_FAILED_NUM - i;
index %= REC_FAILED_NUM;
seq_printf(s, "\t\t\t%-d\n",
suspend_stats.errno[index]);
}
seq_printf(s, " last_failed_step:\t%-s\n",
suspend_step_name(
suspend_stats.failed_steps[last_step]));
for (i = 1; i < REC_FAILED_NUM; i++) {
index = last_step + REC_FAILED_NUM - i;
index %= REC_FAILED_NUM;
seq_printf(s, "\t\t\t%-s\n",
suspend_step_name(
suspend_stats.failed_steps[index]));
}
return 0;
}
static int suspend_stats_open(struct inode *inode, struct file *file)
{
return single_open(file, suspend_stats_show, NULL);
}
static const struct file_operations suspend_stats_operations = {
.open = suspend_stats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init pm_debugfs_init(void)
{
debugfs_create_file("suspend_stats", S_IFREG | S_IRUGO,
NULL, NULL, &suspend_stats_operations);
return 0;
}
late_initcall(pm_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_SLEEP_DEBUG
/*
* pm_print_times: print time taken by devices to suspend and resume.
*
* show() returns whether printing of suspend and resume times is enabled.
* store() accepts 0 or 1. 0 disables printing and 1 enables it.
*/
bool pm_print_times_enabled;
static ssize_t pm_print_times_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", pm_print_times_enabled);
}
static ssize_t pm_print_times_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
unsigned long val;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
if (val > 1)
return -EINVAL;
pm_print_times_enabled = !!val;
return n;
}
power_attr(pm_print_times);
static inline void pm_print_times_init(void)
{
pm_print_times_enabled = !!initcall_debug;
}
#else /* !CONFIG_PP_SLEEP_DEBUG */
static inline void pm_print_times_init(void) {}
#endif /* CONFIG_PM_SLEEP_DEBUG */
struct kobject *power_kobj;
/**
* state - control system power state.
*
* show() returns what states are supported, which is hard-coded to
* 'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and
* 'disk' (Suspend-to-Disk).
*
* store() accepts one of those strings, translates it into the
* proper enumerated value, and initiates a suspend transition.
*/
static ssize_t state_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
char *s = buf;
#ifdef CONFIG_SUSPEND
int i;
for (i = 0; i < PM_SUSPEND_MAX; i++) {
if (pm_states[i] && valid_state(i))
s += sprintf(s,"%s ", pm_states[i]);
}
#endif
#ifdef CONFIG_HIBERNATION
s += sprintf(s, "%s\n", "disk");
#else
if (s != buf)
/* convert the last space to a newline */
*(s-1) = '\n';
#endif
return (s - buf);
}
static suspend_state_t decode_state(const char *buf, size_t n)
{
#ifdef CONFIG_SUSPEND
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 20:00:36 +08:00
suspend_state_t state = PM_SUSPEND_MIN;
const char * const *s;
#endif
char *p;
int len;
p = memchr(buf, '\n', n);
len = p ? p - buf : n;
/* Check hibernation first. */
if (len == 4 && !strncmp(buf, "disk", len))
return PM_SUSPEND_MAX;
#ifdef CONFIG_SUSPEND
for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++)
if (*s && len == strlen(*s) && !strncmp(buf, *s, len))
return state;
#endif
return PM_SUSPEND_ON;
}
static ssize_t state_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
suspend_state_t state;
int error;
error = pm_autosleep_lock();
if (error)
return error;
if (pm_autosleep_state() > PM_SUSPEND_ON) {
error = -EBUSY;
goto out;
}
state = decode_state(buf, n);
if (state < PM_SUSPEND_MAX)
error = pm_suspend(state);
else if (state == PM_SUSPEND_MAX)
error = hibernate();
else
error = -EINVAL;
out:
pm_autosleep_unlock();
return error ? error : n;
}
power_attr(state);
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
#ifdef CONFIG_PM_SLEEP
/*
* The 'wakeup_count' attribute, along with the functions defined in
* drivers/base/power/wakeup.c, provides a means by which wakeup events can be
* handled in a non-racy way.
*
* If a wakeup event occurs when the system is in a sleep state, it simply is
* woken up. In turn, if an event that would wake the system up from a sleep
* state occurs when it is undergoing a transition to that sleep state, the
* transition should be aborted. Moreover, if such an event occurs when the
* system is in the working state, an attempt to start a transition to the
* given sleep state should fail during certain period after the detection of
* the event. Using the 'state' attribute alone is not sufficient to satisfy
* these requirements, because a wakeup event may occur exactly when 'state'
* is being written to and may be delivered to user space right before it is
* frozen, so the event will remain only partially processed until the system is
* woken up by another event. In particular, it won't cause the transition to
* a sleep state to be aborted.
*
* This difficulty may be overcome if user space uses 'wakeup_count' before
* writing to 'state'. It first should read from 'wakeup_count' and store
* the read value. Then, after carrying out its own preparations for the system
* transition to a sleep state, it should write the stored value to
* 'wakeup_count'. If that fails, at least one wakeup event has occurred since
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
* 'wakeup_count' was read and 'state' should not be written to. Otherwise, it
* is allowed to write to 'state', but the transition will be aborted if there
* are any wakeup events detected after 'wakeup_count' was written to.
*/
static ssize_t wakeup_count_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
unsigned int val;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
return pm_get_wakeup_count(&val, true) ?
sprintf(buf, "%u\n", val) : -EINTR;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
}
static ssize_t wakeup_count_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
unsigned int val;
int error;
error = pm_autosleep_lock();
if (error)
return error;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
if (pm_autosleep_state() > PM_SUSPEND_ON) {
error = -EBUSY;
goto out;
}
error = -EINVAL;
if (sscanf(buf, "%u", &val) == 1) {
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
if (pm_save_wakeup_count(val))
error = n;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
}
out:
pm_autosleep_unlock();
return error;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
}
power_attr(wakeup_count);
#ifdef CONFIG_PM_AUTOSLEEP
static ssize_t autosleep_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
suspend_state_t state = pm_autosleep_state();
if (state == PM_SUSPEND_ON)
return sprintf(buf, "off\n");
#ifdef CONFIG_SUSPEND
if (state < PM_SUSPEND_MAX)
return sprintf(buf, "%s\n", valid_state(state) ?
pm_states[state] : "error");
#endif
#ifdef CONFIG_HIBERNATION
return sprintf(buf, "disk\n");
#else
return sprintf(buf, "error");
#endif
}
static ssize_t autosleep_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
suspend_state_t state = decode_state(buf, n);
int error;
if (state == PM_SUSPEND_ON
&& strcmp(buf, "off") && strcmp(buf, "off\n"))
return -EINVAL;
error = pm_autosleep_set_state(state);
return error ? error : n;
}
power_attr(autosleep);
#endif /* CONFIG_PM_AUTOSLEEP */
PM / Sleep: Add user space interface for manipulating wakeup sources, v3 Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-04-30 04:53:42 +08:00
#ifdef CONFIG_PM_WAKELOCKS
static ssize_t wake_lock_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
return pm_show_wakelocks(buf, true);
}
static ssize_t wake_lock_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
int error = pm_wake_lock(buf);
return error ? error : n;
}
power_attr(wake_lock);
static ssize_t wake_unlock_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
return pm_show_wakelocks(buf, false);
}
static ssize_t wake_unlock_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
int error = pm_wake_unlock(buf);
return error ? error : n;
}
power_attr(wake_unlock);
#endif /* CONFIG_PM_WAKELOCKS */
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_TRACE
int pm_trace_enabled;
static ssize_t pm_trace_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", pm_trace_enabled);
}
static ssize_t
pm_trace_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
int val;
if (sscanf(buf, "%d", &val) == 1) {
pm_trace_enabled = !!val;
return n;
}
return -EINVAL;
}
power_attr(pm_trace);
static ssize_t pm_trace_dev_match_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
return show_trace_dev_match(buf, PAGE_SIZE);
}
static ssize_t
pm_trace_dev_match_store(struct kobject *kobj, struct kobj_attribute *attr,
const char *buf, size_t n)
{
return -EINVAL;
}
power_attr(pm_trace_dev_match);
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
#endif /* CONFIG_PM_TRACE */
#ifdef CONFIG_FREEZER
static ssize_t pm_freeze_timeout_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", freeze_timeout_msecs);
}
static ssize_t pm_freeze_timeout_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *buf, size_t n)
{
unsigned long val;
if (kstrtoul(buf, 10, &val))
return -EINVAL;
freeze_timeout_msecs = val;
return n;
}
power_attr(pm_freeze_timeout);
#endif /* CONFIG_FREEZER*/
static struct attribute * g[] = {
&state_attr.attr,
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
#ifdef CONFIG_PM_TRACE
&pm_trace_attr.attr,
&pm_trace_dev_match_attr.attr,
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
#endif
#ifdef CONFIG_PM_SLEEP
&pm_async_attr.attr,
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-06 04:43:53 +08:00
&wakeup_count_attr.attr,
#ifdef CONFIG_PM_AUTOSLEEP
&autosleep_attr.attr,
#endif
PM / Sleep: Add user space interface for manipulating wakeup sources, v3 Android allows user space to manipulate wakelocks using two sysfs file located in /sys/power/, wake_lock and wake_unlock. Writing a wakelock name and optionally a timeout to the wake_lock file causes the wakelock whose name was written to be acquired (it is created before is necessary), optionally with the given timeout. Writing the name of a wakelock to wake_unlock causes that wakelock to be released. Implement an analogous interface for user space using wakeup sources. Add the /sys/power/wake_lock and /sys/power/wake_unlock files allowing user space to create, activate and deactivate wakeup sources, such that writing a name and optionally a timeout to wake_lock causes the wakeup source of that name to be activated, optionally with the given timeout. If that wakeup source doesn't exist, it will be created and then activated. Writing a name to wake_unlock causes the wakeup source of that name, if there is one, to be deactivated. Wakeup sources created with the help of wake_lock that haven't been used for more than 5 minutes are garbage collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT wakeup sources created with the help of wake_lock present at a time. The data type used to track wakeup sources created by user space is called "struct wakelock" to indicate the origins of this feature. This version of the patch includes an rbtree manipulation fix from John Stultz. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NeilBrown <neilb@suse.de>
2012-04-30 04:53:42 +08:00
#ifdef CONFIG_PM_WAKELOCKS
&wake_lock_attr.attr,
&wake_unlock_attr.attr,
#endif
#ifdef CONFIG_PM_DEBUG
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
&pm_test_attr.attr,
#endif
#ifdef CONFIG_PM_SLEEP_DEBUG
&pm_print_times_attr.attr,
#endif
#endif
#ifdef CONFIG_FREEZER
&pm_freeze_timeout_attr.attr,
Suspend: Testing facility (rev. 2) Introduce sysfs attribute /sys/power/pm_test allowing one to test the suspend core code.  Namely, writing one of the strings: freezer devices platform processors core to this file causes the suspend code to work in one of the test modes defined as follows: freezer - test the freezing of processes devices - test the freezing of processes and suspending of devices platform - test the freezing of processes, suspending of devices and platform global   control methods(*) processors - test the freezing of processes, suspending of devices, platform global   control methods and the disabling of nonboot CPUs core - test the freezing of processes, suspending of devices, platform global   control methods, the disabling of nonboot CPUs and suspending of   platform/system devices (*) These are ACPI global control methods on ACPI systems Then, if a suspend is started by normal means, the suspend core will perform its normal operations up to the point indicated by given test level.  Next, it will wait for 5 seconds and carry out the resume operations needed to transition the system back to the fully functional state. Writing "none" to /sys/power/pm_test turns the testing off. When open for reading, /sys/power/pm_test contains a space-separated list of all available tests (including "none" that represents the normal functionality) in which the current test level is indicated by square brackets. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 06:41:19 +08:00
#endif
NULL,
};
static struct attribute_group attr_group = {
.attrs = g,
};
#ifdef CONFIG_PM_RUNTIME
struct workqueue_struct *pm_wq;
EXPORT_SYMBOL_GPL(pm_wq);
static int __init pm_start_workqueue(void)
{
pm_wq = alloc_workqueue("pm", WQ_FREEZABLE, 0);
return pm_wq ? 0 : -ENOMEM;
}
#else
static inline int pm_start_workqueue(void) { return 0; }
#endif
static int __init pm_init(void)
{
int error = pm_start_workqueue();
if (error)
return error;
hibernate_image_size_init();
2011-05-15 17:38:48 +08:00
hibernate_reserved_size_init();
power_kobj = kobject_create_and_add("power", NULL);
if (!power_kobj)
return -ENOMEM;
error = sysfs_create_group(power_kobj, &attr_group);
if (error)
return error;
pm_print_times_init();
return pm_autosleep_init();
}
core_initcall(pm_init);