linux-sg2042/drivers/infiniband/hw/amso1100/c2_provider.c

891 lines
21 KiB
C
Raw Normal View History

/*
* Copyright (c) 2005 Ammasso, Inc. All rights reserved.
* Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/inetdevice.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/if_arp.h>
#include <linux/vmalloc.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <rdma/ib_smi.h>
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
#include <rdma/ib_umem.h>
#include <rdma/ib_user_verbs.h>
#include "c2.h"
#include "c2_provider.h"
#include "c2_user.h"
static int c2_query_device(struct ib_device *ibdev,
struct ib_device_attr *props)
{
struct c2_dev *c2dev = to_c2dev(ibdev);
pr_debug("%s:%u\n", __func__, __LINE__);
*props = c2dev->props;
return 0;
}
static int c2_query_port(struct ib_device *ibdev,
u8 port, struct ib_port_attr *props)
{
pr_debug("%s:%u\n", __func__, __LINE__);
props->max_mtu = IB_MTU_4096;
props->lid = 0;
props->lmc = 0;
props->sm_lid = 0;
props->sm_sl = 0;
props->state = IB_PORT_ACTIVE;
props->phys_state = 0;
props->port_cap_flags =
IB_PORT_CM_SUP |
IB_PORT_REINIT_SUP |
IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP;
props->gid_tbl_len = 1;
props->pkey_tbl_len = 1;
props->qkey_viol_cntr = 0;
props->active_width = 1;
props->active_speed = 1;
return 0;
}
static int c2_query_pkey(struct ib_device *ibdev,
u8 port, u16 index, u16 * pkey)
{
pr_debug("%s:%u\n", __func__, __LINE__);
*pkey = 0;
return 0;
}
static int c2_query_gid(struct ib_device *ibdev, u8 port,
int index, union ib_gid *gid)
{
struct c2_dev *c2dev = to_c2dev(ibdev);
pr_debug("%s:%u\n", __func__, __LINE__);
memset(&(gid->raw[0]), 0, sizeof(gid->raw));
memcpy(&(gid->raw[0]), c2dev->pseudo_netdev->dev_addr, 6);
return 0;
}
/* Allocate the user context data structure. This keeps track
* of all objects associated with a particular user-mode client.
*/
static struct ib_ucontext *c2_alloc_ucontext(struct ib_device *ibdev,
struct ib_udata *udata)
{
struct c2_ucontext *context;
pr_debug("%s:%u\n", __func__, __LINE__);
context = kmalloc(sizeof(*context), GFP_KERNEL);
if (!context)
return ERR_PTR(-ENOMEM);
return &context->ibucontext;
}
static int c2_dealloc_ucontext(struct ib_ucontext *context)
{
pr_debug("%s:%u\n", __func__, __LINE__);
kfree(context);
return 0;
}
static int c2_mmap_uar(struct ib_ucontext *context, struct vm_area_struct *vma)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static struct ib_pd *c2_alloc_pd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct c2_pd *pd;
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
pd = kmalloc(sizeof(*pd), GFP_KERNEL);
if (!pd)
return ERR_PTR(-ENOMEM);
err = c2_pd_alloc(to_c2dev(ibdev), !context, pd);
if (err) {
kfree(pd);
return ERR_PTR(err);
}
if (context) {
if (ib_copy_to_udata(udata, &pd->pd_id, sizeof(__u32))) {
c2_pd_free(to_c2dev(ibdev), pd);
kfree(pd);
return ERR_PTR(-EFAULT);
}
}
return &pd->ibpd;
}
static int c2_dealloc_pd(struct ib_pd *pd)
{
pr_debug("%s:%u\n", __func__, __LINE__);
c2_pd_free(to_c2dev(pd->device), to_c2pd(pd));
kfree(pd);
return 0;
}
static struct ib_ah *c2_ah_create(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return ERR_PTR(-ENOSYS);
}
static int c2_ah_destroy(struct ib_ah *ah)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static void c2_add_ref(struct ib_qp *ibqp)
{
struct c2_qp *qp;
BUG_ON(!ibqp);
qp = to_c2qp(ibqp);
atomic_inc(&qp->refcount);
}
static void c2_rem_ref(struct ib_qp *ibqp)
{
struct c2_qp *qp;
BUG_ON(!ibqp);
qp = to_c2qp(ibqp);
if (atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
struct ib_qp *c2_get_qp(struct ib_device *device, int qpn)
{
struct c2_dev* c2dev = to_c2dev(device);
struct c2_qp *qp;
qp = c2_find_qpn(c2dev, qpn);
pr_debug("%s Returning QP=%p for QPN=%d, device=%p, refcount=%d\n",
__func__, qp, qpn, device,
(qp?atomic_read(&qp->refcount):0));
return (qp?&qp->ibqp:NULL);
}
static struct ib_qp *c2_create_qp(struct ib_pd *pd,
struct ib_qp_init_attr *init_attr,
struct ib_udata *udata)
{
struct c2_qp *qp;
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
if (init_attr->create_flags)
return ERR_PTR(-EINVAL);
switch (init_attr->qp_type) {
case IB_QPT_RC:
qp = kzalloc(sizeof(*qp), GFP_KERNEL);
if (!qp) {
pr_debug("%s: Unable to allocate QP\n", __func__);
return ERR_PTR(-ENOMEM);
}
spin_lock_init(&qp->lock);
if (pd->uobject) {
/* userspace specific */
}
err = c2_alloc_qp(to_c2dev(pd->device),
to_c2pd(pd), init_attr, qp);
if (err && pd->uobject) {
/* userspace specific */
}
break;
default:
pr_debug("%s: Invalid QP type: %d\n", __func__,
init_attr->qp_type);
return ERR_PTR(-EINVAL);
}
if (err) {
kfree(qp);
return ERR_PTR(err);
}
return &qp->ibqp;
}
static int c2_destroy_qp(struct ib_qp *ib_qp)
{
struct c2_qp *qp = to_c2qp(ib_qp);
pr_debug("%s:%u qp=%p,qp->state=%d\n",
__func__, __LINE__, ib_qp, qp->state);
c2_free_qp(to_c2dev(ib_qp->device), qp);
kfree(qp);
return 0;
}
static struct ib_cq *c2_create_cq(struct ib_device *ibdev, int entries, int vector,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct c2_cq *cq;
int err;
cq = kmalloc(sizeof(*cq), GFP_KERNEL);
if (!cq) {
pr_debug("%s: Unable to allocate CQ\n", __func__);
return ERR_PTR(-ENOMEM);
}
err = c2_init_cq(to_c2dev(ibdev), entries, NULL, cq);
if (err) {
pr_debug("%s: error initializing CQ\n", __func__);
kfree(cq);
return ERR_PTR(err);
}
return &cq->ibcq;
}
static int c2_destroy_cq(struct ib_cq *ib_cq)
{
struct c2_cq *cq = to_c2cq(ib_cq);
pr_debug("%s:%u\n", __func__, __LINE__);
c2_free_cq(to_c2dev(ib_cq->device), cq);
kfree(cq);
return 0;
}
static inline u32 c2_convert_access(int acc)
{
return (acc & IB_ACCESS_REMOTE_WRITE ? C2_ACF_REMOTE_WRITE : 0) |
(acc & IB_ACCESS_REMOTE_READ ? C2_ACF_REMOTE_READ : 0) |
(acc & IB_ACCESS_LOCAL_WRITE ? C2_ACF_LOCAL_WRITE : 0) |
C2_ACF_LOCAL_READ | C2_ACF_WINDOW_BIND;
}
static struct ib_mr *c2_reg_phys_mr(struct ib_pd *ib_pd,
struct ib_phys_buf *buffer_list,
int num_phys_buf, int acc, u64 * iova_start)
{
struct c2_mr *mr;
u64 *page_list;
u32 total_len;
int err, i, j, k, page_shift, pbl_depth;
pbl_depth = 0;
total_len = 0;
page_shift = PAGE_SHIFT;
/*
* If there is only 1 buffer we assume this could
* be a map of all phy mem...use a 32k page_shift.
*/
if (num_phys_buf == 1)
page_shift += 3;
for (i = 0; i < num_phys_buf; i++) {
if (buffer_list[i].addr & ~PAGE_MASK) {
pr_debug("Unaligned Memory Buffer: 0x%x\n",
(unsigned int) buffer_list[i].addr);
return ERR_PTR(-EINVAL);
}
if (!buffer_list[i].size) {
pr_debug("Invalid Buffer Size\n");
return ERR_PTR(-EINVAL);
}
total_len += buffer_list[i].size;
pbl_depth += ALIGN(buffer_list[i].size,
(1 << page_shift)) >> page_shift;
}
page_list = vmalloc(sizeof(u64) * pbl_depth);
if (!page_list) {
pr_debug("couldn't vmalloc page_list of size %zd\n",
(sizeof(u64) * pbl_depth));
return ERR_PTR(-ENOMEM);
}
for (i = 0, j = 0; i < num_phys_buf; i++) {
int naddrs;
naddrs = ALIGN(buffer_list[i].size,
(1 << page_shift)) >> page_shift;
for (k = 0; k < naddrs; k++)
page_list[j++] = (buffer_list[i].addr +
(k << page_shift));
}
mr = kmalloc(sizeof(*mr), GFP_KERNEL);
if (!mr) {
vfree(page_list);
return ERR_PTR(-ENOMEM);
}
mr->pd = to_c2pd(ib_pd);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
mr->umem = NULL;
pr_debug("%s - page shift %d, pbl_depth %d, total_len %u, "
"*iova_start %llx, first pa %llx, last pa %llx\n",
__func__, page_shift, pbl_depth, total_len,
(unsigned long long) *iova_start,
(unsigned long long) page_list[0],
(unsigned long long) page_list[pbl_depth-1]);
err = c2_nsmr_register_phys_kern(to_c2dev(ib_pd->device), page_list,
(1 << page_shift), pbl_depth,
total_len, 0, iova_start,
c2_convert_access(acc), mr);
vfree(page_list);
if (err) {
kfree(mr);
return ERR_PTR(err);
}
return &mr->ibmr;
}
static struct ib_mr *c2_get_dma_mr(struct ib_pd *pd, int acc)
{
struct ib_phys_buf bl;
u64 kva = 0;
pr_debug("%s:%u\n", __func__, __LINE__);
/* AMSO1100 limit */
bl.size = 0xffffffff;
bl.addr = 0;
return c2_reg_phys_mr(pd, &bl, 1, acc, &kva);
}
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
static struct ib_mr *c2_reg_user_mr(struct ib_pd *pd, u64 start, u64 length,
u64 virt, int acc, struct ib_udata *udata)
{
u64 *pages;
u64 kva = 0;
int shift, n, len;
int i, j, k;
int err = 0;
struct ib_umem_chunk *chunk;
struct c2_pd *c2pd = to_c2pd(pd);
struct c2_mr *c2mr;
pr_debug("%s:%u\n", __func__, __LINE__);
c2mr = kmalloc(sizeof(*c2mr), GFP_KERNEL);
if (!c2mr)
return ERR_PTR(-ENOMEM);
c2mr->pd = c2pd;
c2mr->umem = ib_umem_get(pd->uobject->context, start, length, acc, 0);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
if (IS_ERR(c2mr->umem)) {
err = PTR_ERR(c2mr->umem);
kfree(c2mr);
return ERR_PTR(err);
}
shift = ffs(c2mr->umem->page_size) - 1;
n = 0;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
list_for_each_entry(chunk, &c2mr->umem->chunk_list, list)
n += chunk->nents;
pages = kmalloc(n * sizeof(u64), GFP_KERNEL);
if (!pages) {
err = -ENOMEM;
goto err;
}
i = 0;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
list_for_each_entry(chunk, &c2mr->umem->chunk_list, list) {
for (j = 0; j < chunk->nmap; ++j) {
len = sg_dma_len(&chunk->page_list[j]) >> shift;
for (k = 0; k < len; ++k) {
pages[i++] =
sg_dma_address(&chunk->page_list[j]) +
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
(c2mr->umem->page_size * k);
}
}
}
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
kva = virt;
err = c2_nsmr_register_phys_kern(to_c2dev(pd->device),
pages,
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
c2mr->umem->page_size,
i,
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
length,
c2mr->umem->offset,
&kva,
c2_convert_access(acc),
c2mr);
kfree(pages);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
if (err)
goto err;
return &c2mr->ibmr;
err:
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
ib_umem_release(c2mr->umem);
kfree(c2mr);
return ERR_PTR(err);
}
static int c2_dereg_mr(struct ib_mr *ib_mr)
{
struct c2_mr *mr = to_c2mr(ib_mr);
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_stag_dealloc(to_c2dev(ib_mr->device), ib_mr->lkey);
if (err)
pr_debug("c2_stag_dealloc failed: %d\n", err);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
else {
if (mr->umem)
ib_umem_release(mr->umem);
kfree(mr);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
}
return err;
}
static ssize_t show_rev(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c2_dev *c2dev = container_of(dev, struct c2_dev, ibdev.dev);
pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%x\n", c2dev->props.hw_ver);
}
static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c2_dev *c2dev = container_of(dev, struct c2_dev, ibdev.dev);
pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%x.%x.%x\n",
(int) (c2dev->props.fw_ver >> 32),
(int) (c2dev->props.fw_ver >> 16) & 0xffff,
(int) (c2dev->props.fw_ver & 0xffff));
}
static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
char *buf)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "AMSO1100\n");
}
static ssize_t show_board(struct device *dev, struct device_attribute *attr,
char *buf)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%.*s\n", 32, "AMSO1100 Board ID");
}
static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL);
static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
static DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL);
static struct device_attribute *c2_dev_attributes[] = {
&dev_attr_hw_rev,
&dev_attr_fw_ver,
&dev_attr_hca_type,
&dev_attr_board_id
};
static int c2_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_udata *udata)
{
int err;
err =
c2_qp_modify(to_c2dev(ibqp->device), to_c2qp(ibqp), attr,
attr_mask);
return err;
}
static int c2_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static int c2_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static int c2_process_mad(struct ib_device *ibdev,
int mad_flags,
u8 port_num,
struct ib_wc *in_wc,
struct ib_grh *in_grh,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static int c2_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param)
{
pr_debug("%s:%u\n", __func__, __LINE__);
/* Request a connection */
return c2_llp_connect(cm_id, iw_param);
}
static int c2_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param)
{
pr_debug("%s:%u\n", __func__, __LINE__);
/* Accept the new connection */
return c2_llp_accept(cm_id, iw_param);
}
static int c2_reject(struct iw_cm_id *cm_id, const void *pdata, u8 pdata_len)
{
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_reject(cm_id, pdata, pdata_len);
return err;
}
static int c2_service_create(struct iw_cm_id *cm_id, int backlog)
{
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_service_create(cm_id, backlog);
pr_debug("%s:%u err=%d\n",
__func__, __LINE__,
err);
return err;
}
static int c2_service_destroy(struct iw_cm_id *cm_id)
{
int err;
pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_service_destroy(cm_id);
return err;
}
static int c2_pseudo_up(struct net_device *netdev)
{
struct in_device *ind;
struct c2_dev *c2dev = netdev->ml_priv;
ind = in_dev_get(netdev);
if (!ind)
return 0;
pr_debug("adding...\n");
for_ifa(ind) {
#ifdef DEBUG
u8 *ip = (u8 *) & ifa->ifa_address;
pr_debug("%s: %d.%d.%d.%d\n",
ifa->ifa_label, ip[0], ip[1], ip[2], ip[3]);
#endif
c2_add_addr(c2dev, ifa->ifa_address, ifa->ifa_mask);
}
endfor_ifa(ind);
in_dev_put(ind);
return 0;
}
static int c2_pseudo_down(struct net_device *netdev)
{
struct in_device *ind;
struct c2_dev *c2dev = netdev->ml_priv;
ind = in_dev_get(netdev);
if (!ind)
return 0;
pr_debug("deleting...\n");
for_ifa(ind) {
#ifdef DEBUG
u8 *ip = (u8 *) & ifa->ifa_address;
pr_debug("%s: %d.%d.%d.%d\n",
ifa->ifa_label, ip[0], ip[1], ip[2], ip[3]);
#endif
c2_del_addr(c2dev, ifa->ifa_address, ifa->ifa_mask);
}
endfor_ifa(ind);
in_dev_put(ind);
return 0;
}
static int c2_pseudo_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
kfree_skb(skb);
return NETDEV_TX_OK;
}
static int c2_pseudo_change_mtu(struct net_device *netdev, int new_mtu)
{
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
netdev->mtu = new_mtu;
/* TODO: Tell rnic about new rmda interface mtu */
return 0;
}
static const struct net_device_ops c2_pseudo_netdev_ops = {
.ndo_open = c2_pseudo_up,
.ndo_stop = c2_pseudo_down,
.ndo_start_xmit = c2_pseudo_xmit_frame,
.ndo_change_mtu = c2_pseudo_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
static void setup(struct net_device *netdev)
{
netdev->netdev_ops = &c2_pseudo_netdev_ops;
netdev->watchdog_timeo = 0;
netdev->type = ARPHRD_ETHER;
netdev->mtu = 1500;
netdev->hard_header_len = ETH_HLEN;
netdev->addr_len = ETH_ALEN;
netdev->tx_queue_len = 0;
netdev->flags |= IFF_NOARP;
}
static struct net_device *c2_pseudo_netdev_init(struct c2_dev *c2dev)
{
char name[IFNAMSIZ];
struct net_device *netdev;
/* change ethxxx to iwxxx */
strcpy(name, "iw");
strcat(name, &c2dev->netdev->name[3]);
netdev = alloc_netdev(0, name, setup);
if (!netdev) {
printk(KERN_ERR PFX "%s - etherdev alloc failed",
__func__);
return NULL;
}
netdev->ml_priv = c2dev;
SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev);
memcpy_fromio(netdev->dev_addr, c2dev->kva + C2_REGS_RDMA_ENADDR, 6);
/* Print out the MAC address */
pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X\n",
netdev->name,
netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
#if 0
/* Disable network packets */
netif_stop_queue(netdev);
#endif
return netdev;
}
int c2_register_device(struct c2_dev *dev)
{
int ret = -ENOMEM;
int i;
/* Register pseudo network device */
dev->pseudo_netdev = c2_pseudo_netdev_init(dev);
if (!dev->pseudo_netdev)
goto out;
ret = register_netdev(dev->pseudo_netdev);
if (ret)
goto out_free_netdev;
pr_debug("%s:%u\n", __func__, __LINE__);
strlcpy(dev->ibdev.name, "amso%d", IB_DEVICE_NAME_MAX);
dev->ibdev.owner = THIS_MODULE;
dev->ibdev.uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
(1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
(1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_REG_MR) |
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
(1ull << IB_USER_VERBS_CMD_POLL_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_POST_SEND) |
(1ull << IB_USER_VERBS_CMD_POST_RECV);
dev->ibdev.node_type = RDMA_NODE_RNIC;
memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid));
memcpy(&dev->ibdev.node_guid, dev->pseudo_netdev->dev_addr, 6);
dev->ibdev.phys_port_cnt = 1;
dev->ibdev.num_comp_vectors = 1;
dev->ibdev.dma_device = &dev->pcidev->dev;
dev->ibdev.query_device = c2_query_device;
dev->ibdev.query_port = c2_query_port;
dev->ibdev.query_pkey = c2_query_pkey;
dev->ibdev.query_gid = c2_query_gid;
dev->ibdev.alloc_ucontext = c2_alloc_ucontext;
dev->ibdev.dealloc_ucontext = c2_dealloc_ucontext;
dev->ibdev.mmap = c2_mmap_uar;
dev->ibdev.alloc_pd = c2_alloc_pd;
dev->ibdev.dealloc_pd = c2_dealloc_pd;
dev->ibdev.create_ah = c2_ah_create;
dev->ibdev.destroy_ah = c2_ah_destroy;
dev->ibdev.create_qp = c2_create_qp;
dev->ibdev.modify_qp = c2_modify_qp;
dev->ibdev.destroy_qp = c2_destroy_qp;
dev->ibdev.create_cq = c2_create_cq;
dev->ibdev.destroy_cq = c2_destroy_cq;
dev->ibdev.poll_cq = c2_poll_cq;
dev->ibdev.get_dma_mr = c2_get_dma_mr;
dev->ibdev.reg_phys_mr = c2_reg_phys_mr;
dev->ibdev.reg_user_mr = c2_reg_user_mr;
dev->ibdev.dereg_mr = c2_dereg_mr;
dev->ibdev.alloc_fmr = NULL;
dev->ibdev.unmap_fmr = NULL;
dev->ibdev.dealloc_fmr = NULL;
dev->ibdev.map_phys_fmr = NULL;
dev->ibdev.attach_mcast = c2_multicast_attach;
dev->ibdev.detach_mcast = c2_multicast_detach;
dev->ibdev.process_mad = c2_process_mad;
dev->ibdev.req_notify_cq = c2_arm_cq;
dev->ibdev.post_send = c2_post_send;
dev->ibdev.post_recv = c2_post_receive;
dev->ibdev.iwcm = kmalloc(sizeof(*dev->ibdev.iwcm), GFP_KERNEL);
if (dev->ibdev.iwcm == NULL) {
ret = -ENOMEM;
goto out_unregister_netdev;
}
dev->ibdev.iwcm->add_ref = c2_add_ref;
dev->ibdev.iwcm->rem_ref = c2_rem_ref;
dev->ibdev.iwcm->get_qp = c2_get_qp;
dev->ibdev.iwcm->connect = c2_connect;
dev->ibdev.iwcm->accept = c2_accept;
dev->ibdev.iwcm->reject = c2_reject;
dev->ibdev.iwcm->create_listen = c2_service_create;
dev->ibdev.iwcm->destroy_listen = c2_service_destroy;
ret = ib_register_device(&dev->ibdev, NULL);
if (ret)
goto out_free_iwcm;
for (i = 0; i < ARRAY_SIZE(c2_dev_attributes); ++i) {
ret = device_create_file(&dev->ibdev.dev,
c2_dev_attributes[i]);
if (ret)
goto out_unregister_ibdev;
}
goto out;
out_unregister_ibdev:
ib_unregister_device(&dev->ibdev);
out_free_iwcm:
kfree(dev->ibdev.iwcm);
out_unregister_netdev:
unregister_netdev(dev->pseudo_netdev);
out_free_netdev:
free_netdev(dev->pseudo_netdev);
out:
pr_debug("%s:%u ret=%d\n", __func__, __LINE__, ret);
return ret;
}
void c2_unregister_device(struct c2_dev *dev)
{
pr_debug("%s:%u\n", __func__, __LINE__);
unregister_netdev(dev->pseudo_netdev);
free_netdev(dev->pseudo_netdev);
ib_unregister_device(&dev->ibdev);
}