linux-sg2042/net/wireless/core.c

1325 lines
33 KiB
C
Raw Normal View History

/*
* This is the linux wireless configuration interface.
*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2015 Intel Deutschland GmbH
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "nl80211.h"
#include "core.h"
#include "sysfs.h"
#include "debugfs.h"
#include "wext-compat.h"
#include "rdev-ops.h"
/* name for sysfs, %d is appended */
#define PHY_NAME "phy"
MODULE_AUTHOR("Johannes Berg");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("wireless configuration support");
MODULE_ALIAS_GENL_FAMILY(NL80211_GENL_NAME);
/* RCU-protected (and RTNL for writers) */
LIST_HEAD(cfg80211_rdev_list);
int cfg80211_rdev_list_generation;
/* for debugfs */
static struct dentry *ieee80211_debugfs_dir;
/* for the cleanup, scan and event works */
struct workqueue_struct *cfg80211_wq;
static bool cfg80211_disable_40mhz_24ghz;
module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
"Disable 40MHz support in the 2.4GHz band");
struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
{
struct cfg80211_registered_device *result = NULL, *rdev;
ASSERT_RTNL();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (rdev->wiphy_idx == wiphy_idx) {
result = rdev;
break;
}
}
return result;
}
int get_wiphy_idx(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
return rdev->wiphy_idx;
}
struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
{
struct cfg80211_registered_device *rdev;
ASSERT_RTNL();
rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
if (!rdev)
return NULL;
return &rdev->wiphy;
}
static int cfg80211_dev_check_name(struct cfg80211_registered_device *rdev,
const char *newname)
{
struct cfg80211_registered_device *rdev2;
int wiphy_idx, taken = -1, digits;
ASSERT_RTNL();
/* prohibit calling the thing phy%d when %d is not its number */
sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
/* count number of places needed to print wiphy_idx */
digits = 1;
while (wiphy_idx /= 10)
digits++;
/*
* deny the name if it is phy<idx> where <idx> is printed
* without leading zeroes. taken == strlen(newname) here
*/
if (taken == strlen(PHY_NAME) + digits)
return -EINVAL;
}
/* Ensure another device does not already have this name. */
list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
if (strcmp(newname, wiphy_name(&rdev2->wiphy)) == 0)
return -EINVAL;
return 0;
}
int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
char *newname)
{
int result;
ASSERT_RTNL();
/* Ignore nop renames */
if (strcmp(newname, wiphy_name(&rdev->wiphy)) == 0)
return 0;
result = cfg80211_dev_check_name(rdev, newname);
if (result < 0)
return result;
result = device_rename(&rdev->wiphy.dev, newname);
if (result)
return result;
if (rdev->wiphy.debugfsdir &&
!debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
rdev->wiphy.debugfsdir,
rdev->wiphy.debugfsdir->d_parent,
newname))
pr_err("failed to rename debugfs dir to %s!\n", newname);
nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY);
return 0;
}
int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
struct net *net)
{
struct wireless_dev *wdev;
int err = 0;
if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
return -EOPNOTSUPP;
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (!wdev->netdev)
continue;
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
if (err)
break;
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
if (err) {
/* failed -- clean up to old netns */
net = wiphy_net(&rdev->wiphy);
list_for_each_entry_continue_reverse(wdev,
&rdev->wiphy.wdev_list,
list) {
if (!wdev->netdev)
continue;
wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
err = dev_change_net_namespace(wdev->netdev, net,
"wlan%d");
WARN_ON(err);
wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
}
return err;
}
wiphy_net_set(&rdev->wiphy, net);
err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
WARN_ON(err);
return 0;
}
static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
{
struct cfg80211_registered_device *rdev = data;
rdev_rfkill_poll(rdev);
}
void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
ASSERT_RTNL();
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
return;
if (!wdev->p2p_started)
return;
rdev_stop_p2p_device(rdev, wdev);
wdev->p2p_started = false;
rdev->opencount--;
if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
if (WARN_ON(!rdev->scan_req->notified))
rdev->scan_req->info.aborted = true;
___cfg80211_scan_done(rdev, false);
}
}
void cfg80211_stop_nan(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
ASSERT_RTNL();
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_NAN))
return;
if (!wdev->nan_started)
return;
rdev_stop_nan(rdev, wdev);
wdev->nan_started = false;
rdev->opencount--;
}
void cfg80211_shutdown_all_interfaces(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct wireless_dev *wdev;
ASSERT_RTNL();
list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
if (wdev->netdev) {
dev_close(wdev->netdev);
continue;
}
/* otherwise, check iftype */
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
cfg80211_stop_p2p_device(rdev, wdev);
break;
case NL80211_IFTYPE_NAN:
cfg80211_stop_nan(rdev, wdev);
break;
default:
break;
}
}
}
EXPORT_SYMBOL_GPL(cfg80211_shutdown_all_interfaces);
static int cfg80211_rfkill_set_block(void *data, bool blocked)
{
struct cfg80211_registered_device *rdev = data;
if (!blocked)
return 0;
rtnl_lock();
cfg80211_shutdown_all_interfaces(&rdev->wiphy);
rtnl_unlock();
return 0;
}
static void cfg80211_rfkill_sync_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
}
static void cfg80211_event_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
event_work);
rtnl_lock();
cfg80211_process_rdev_events(rdev);
rtnl_unlock();
}
void cfg80211_destroy_ifaces(struct cfg80211_registered_device *rdev)
{
struct cfg80211_iface_destroy *item;
ASSERT_RTNL();
spin_lock_irq(&rdev->destroy_list_lock);
while ((item = list_first_entry_or_null(&rdev->destroy_list,
struct cfg80211_iface_destroy,
list))) {
struct wireless_dev *wdev, *tmp;
u32 nlportid = item->nlportid;
list_del(&item->list);
kfree(item);
spin_unlock_irq(&rdev->destroy_list_lock);
list_for_each_entry_safe(wdev, tmp,
&rdev->wiphy.wdev_list, list) {
if (nlportid == wdev->owner_nlportid)
rdev_del_virtual_intf(rdev, wdev);
}
spin_lock_irq(&rdev->destroy_list_lock);
}
spin_unlock_irq(&rdev->destroy_list_lock);
}
static void cfg80211_destroy_iface_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
destroy_work);
rtnl_lock();
cfg80211_destroy_ifaces(rdev);
rtnl_unlock();
}
static void cfg80211_sched_scan_stop_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(work, struct cfg80211_registered_device,
sched_scan_stop_wk);
rtnl_lock();
__cfg80211_stop_sched_scan(rdev, false);
rtnl_unlock();
}
/* exported functions */
struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv,
const char *requested_name)
{
static atomic_t wiphy_counter = ATOMIC_INIT(0);
struct cfg80211_registered_device *rdev;
int alloc_size;
WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
WARN_ON(ops->connect && !ops->disconnect);
WARN_ON(ops->join_ibss && !ops->leave_ibss);
WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
WARN_ON(ops->add_station && !ops->del_station);
WARN_ON(ops->add_mpath && !ops->del_mpath);
WARN_ON(ops->join_mesh && !ops->leave_mesh);
WARN_ON(ops->start_p2p_device && !ops->stop_p2p_device);
WARN_ON(ops->start_ap && !ops->stop_ap);
WARN_ON(ops->join_ocb && !ops->leave_ocb);
WARN_ON(ops->suspend && !ops->resume);
WARN_ON(ops->sched_scan_start && !ops->sched_scan_stop);
WARN_ON(ops->remain_on_channel && !ops->cancel_remain_on_channel);
WARN_ON(ops->tdls_channel_switch && !ops->tdls_cancel_channel_switch);
WARN_ON(ops->add_tx_ts && !ops->del_tx_ts);
alloc_size = sizeof(*rdev) + sizeof_priv;
rdev = kzalloc(alloc_size, GFP_KERNEL);
if (!rdev)
return NULL;
rdev->ops = ops;
rdev->wiphy_idx = atomic_inc_return(&wiphy_counter);
if (unlikely(rdev->wiphy_idx < 0)) {
/* ugh, wrapped! */
atomic_dec(&wiphy_counter);
kfree(rdev);
return NULL;
}
/* atomic_inc_return makes it start at 1, make it start at 0 */
rdev->wiphy_idx--;
/* give it a proper name */
if (requested_name && requested_name[0]) {
int rv;
rtnl_lock();
rv = cfg80211_dev_check_name(rdev, requested_name);
if (rv < 0) {
rtnl_unlock();
goto use_default_name;
}
rv = dev_set_name(&rdev->wiphy.dev, "%s", requested_name);
rtnl_unlock();
if (rv)
goto use_default_name;
} else {
use_default_name:
/* NOTE: This is *probably* safe w/out holding rtnl because of
* the restrictions on phy names. Probably this call could
* fail if some other part of the kernel (re)named a device
* phyX. But, might should add some locking and check return
* value, and use a different name if this one exists?
*/
dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
}
INIT_LIST_HEAD(&rdev->wiphy.wdev_list);
INIT_LIST_HEAD(&rdev->beacon_registrations);
spin_lock_init(&rdev->beacon_registrations_lock);
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
INIT_LIST_HEAD(&rdev->mlme_unreg);
spin_lock_init(&rdev->mlme_unreg_lock);
INIT_WORK(&rdev->mlme_unreg_wk, cfg80211_mlme_unreg_wk);
INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk,
cfg80211_dfs_channels_update_work);
#ifdef CONFIG_CFG80211_WEXT
rdev->wiphy.wext = &cfg80211_wext_handler;
#endif
device_initialize(&rdev->wiphy.dev);
rdev->wiphy.dev.class = &ieee80211_class;
rdev->wiphy.dev.platform_data = rdev;
device_enable_async_suspend(&rdev->wiphy.dev);
INIT_LIST_HEAD(&rdev->destroy_list);
spin_lock_init(&rdev->destroy_list_lock);
INIT_WORK(&rdev->destroy_work, cfg80211_destroy_iface_wk);
INIT_WORK(&rdev->sched_scan_stop_wk, cfg80211_sched_scan_stop_wk);
#ifdef CONFIG_CFG80211_DEFAULT_PS
rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
#endif
wiphy_net_set(&rdev->wiphy, &init_net);
rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
&rdev->wiphy.dev, RFKILL_TYPE_WLAN,
&rdev->rfkill_ops, rdev);
if (!rdev->rfkill) {
kfree(rdev);
return NULL;
}
INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
INIT_WORK(&rdev->event_work, cfg80211_event_work);
init_waitqueue_head(&rdev->dev_wait);
/*
* Initialize wiphy parameters to IEEE 802.11 MIB default values.
* Fragmentation and RTS threshold are disabled by default with the
* special -1 value.
*/
rdev->wiphy.retry_short = 7;
rdev->wiphy.retry_long = 4;
rdev->wiphy.frag_threshold = (u32) -1;
rdev->wiphy.rts_threshold = (u32) -1;
rdev->wiphy.coverage_class = 0;
rdev->wiphy.max_num_csa_counters = 1;
rdev->wiphy.max_sched_scan_plans = 1;
rdev->wiphy.max_sched_scan_plan_interval = U32_MAX;
return &rdev->wiphy;
}
EXPORT_SYMBOL(wiphy_new_nm);
static int wiphy_verify_combinations(struct wiphy *wiphy)
{
const struct ieee80211_iface_combination *c;
int i, j;
for (i = 0; i < wiphy->n_iface_combinations; i++) {
u32 cnt = 0;
u16 all_iftypes = 0;
c = &wiphy->iface_combinations[i];
/*
* Combinations with just one interface aren't real,
* however we make an exception for DFS.
*/
if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths))
return -EINVAL;
/* Need at least one channel */
if (WARN_ON(!c->num_different_channels))
return -EINVAL;
/*
* Put a sane limit on maximum number of different
* channels to simplify channel accounting code.
*/
if (WARN_ON(c->num_different_channels >
CFG80211_MAX_NUM_DIFFERENT_CHANNELS))
return -EINVAL;
/* DFS only works on one channel. */
if (WARN_ON(c->radar_detect_widths &&
(c->num_different_channels > 1)))
return -EINVAL;
if (WARN_ON(!c->n_limits))
return -EINVAL;
for (j = 0; j < c->n_limits; j++) {
u16 types = c->limits[j].types;
/* interface types shouldn't overlap */
if (WARN_ON(types & all_iftypes))
return -EINVAL;
all_iftypes |= types;
if (WARN_ON(!c->limits[j].max))
return -EINVAL;
/* Shouldn't list software iftypes in combinations! */
if (WARN_ON(wiphy->software_iftypes & types))
return -EINVAL;
/* Only a single P2P_DEVICE can be allowed */
if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
c->limits[j].max > 1))
return -EINVAL;
/* Only a single NAN can be allowed */
if (WARN_ON(types & BIT(NL80211_IFTYPE_NAN) &&
c->limits[j].max > 1))
return -EINVAL;
cnt += c->limits[j].max;
/*
* Don't advertise an unsupported type
* in a combination.
*/
if (WARN_ON((wiphy->interface_modes & types) != types))
return -EINVAL;
}
/* You can't even choose that many! */
if (WARN_ON(cnt < c->max_interfaces))
return -EINVAL;
}
return 0;
}
int wiphy_register(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
int res;
enum nl80211_band band;
struct ieee80211_supported_band *sband;
bool have_band = false;
int i;
u16 ifmodes = wiphy->interface_modes;
#ifdef CONFIG_PM
if (WARN_ON(wiphy->wowlan &&
(wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
!(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
return -EINVAL;
if (WARN_ON(wiphy->wowlan &&
!wiphy->wowlan->flags && !wiphy->wowlan->n_patterns &&
!wiphy->wowlan->tcp))
return -EINVAL;
#endif
if (WARN_ON((wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
(!rdev->ops->tdls_channel_switch ||
!rdev->ops->tdls_cancel_channel_switch)))
return -EINVAL;
if (WARN_ON((wiphy->interface_modes & BIT(NL80211_IFTYPE_NAN)) &&
(!rdev->ops->start_nan || !rdev->ops->stop_nan ||
!rdev->ops->add_nan_func || !rdev->ops->del_nan_func)))
return -EINVAL;
/*
* if a wiphy has unsupported modes for regulatory channel enforcement,
* opt-out of enforcement checking
*/
if (wiphy->interface_modes & ~(BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_P2P_DEVICE) |
BIT(NL80211_IFTYPE_NAN) |
BIT(NL80211_IFTYPE_AP_VLAN) |
BIT(NL80211_IFTYPE_MONITOR)))
wiphy->regulatory_flags |= REGULATORY_IGNORE_STALE_KICKOFF;
if (WARN_ON((wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) &&
(wiphy->regulatory_flags &
(REGULATORY_CUSTOM_REG |
REGULATORY_STRICT_REG |
REGULATORY_COUNTRY_IE_FOLLOW_POWER |
REGULATORY_COUNTRY_IE_IGNORE))))
return -EINVAL;
if (WARN_ON(wiphy->coalesce &&
(!wiphy->coalesce->n_rules ||
!wiphy->coalesce->n_patterns) &&
(!wiphy->coalesce->pattern_min_len ||
wiphy->coalesce->pattern_min_len >
wiphy->coalesce->pattern_max_len)))
return -EINVAL;
if (WARN_ON(wiphy->ap_sme_capa &&
!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
return -EINVAL;
if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
return -EINVAL;
if (WARN_ON(wiphy->addresses &&
!is_zero_ether_addr(wiphy->perm_addr) &&
memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
ETH_ALEN)))
return -EINVAL;
if (WARN_ON(wiphy->max_acl_mac_addrs &&
(!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
!rdev->ops->set_mac_acl)))
return -EINVAL;
/* assure only valid behaviours are flagged by driver
* hence subtract 2 as bit 0 is invalid.
*/
if (WARN_ON(wiphy->bss_select_support &&
(wiphy->bss_select_support & ~(BIT(__NL80211_BSS_SELECT_ATTR_AFTER_LAST) - 2))))
return -EINVAL;
if (wiphy->addresses)
memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
/* sanity check ifmodes */
WARN_ON(!ifmodes);
ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
if (WARN_ON(ifmodes != wiphy->interface_modes))
wiphy->interface_modes = ifmodes;
res = wiphy_verify_combinations(wiphy);
if (res)
return res;
/* sanity check supported bands/channels */
for (band = 0; band < NUM_NL80211_BANDS; band++) {
sband = wiphy->bands[band];
if (!sband)
continue;
sband->band = band;
if (WARN_ON(!sband->n_channels))
return -EINVAL;
/*
* on 60GHz band, there are no legacy rates, so
* n_bitrates is 0
*/
if (WARN_ON(band != NL80211_BAND_60GHZ &&
!sband->n_bitrates))
return -EINVAL;
/*
* Since cfg80211_disable_40mhz_24ghz is global, we can
* modify the sband's ht data even if the driver uses a
* global structure for that.
*/
if (cfg80211_disable_40mhz_24ghz &&
band == NL80211_BAND_2GHZ &&
sband->ht_cap.ht_supported) {
sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
}
/*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
*/
if (WARN_ON(sband->n_bitrates > 32))
return -EINVAL;
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
sband->channels[i].orig_mag = INT_MAX;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
}
have_band = true;
}
if (!have_band) {
WARN_ON(1);
return -EINVAL;
}
#ifdef CONFIG_PM
if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
(!rdev->wiphy.wowlan->pattern_min_len ||
rdev->wiphy.wowlan->pattern_min_len >
rdev->wiphy.wowlan->pattern_max_len)))
return -EINVAL;
#endif
/* check and set up bitrates */
ieee80211_set_bitrate_flags(wiphy);
rdev->wiphy.features |= NL80211_FEATURE_SCAN_FLUSH;
rtnl_lock();
res = device_add(&rdev->wiphy.dev);
wireless: register wiphy rfkill w/o holding cfg80211_mutex Otherwise lockdep complains... https://bugzilla.kernel.org/show_bug.cgi?id=17311 [ INFO: possible circular locking dependency detected ] 2.6.36-rc2-git4 #12 ------------------------------------------------------- kworker/0:3/3630 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>] rfkill_switch_all+0x24/0x49 [rfkill] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rfkill_global_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill] [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211] [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211] [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn] [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 -> #1 (cfg80211_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211] [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211] [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272 [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7 [<ffffffff8139a687>] T.723+0xbd/0x12c [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509 [<ffffffff81102b5d>] sys_ioctl+0x51/0x74 [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b -> #0 (rtnl_mutex){+.+.+.}: [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffff813396c7>] rtnl_lock+0x12/0x14 [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211] [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill] [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill] [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill] [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill] [<ffffffff81060708>] process_one_work+0x248/0x403 [<ffffffff81062620>] worker_thread+0x139/0x214 [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Johannes Berg <johannes@sipsolutions.net>
2010-08-31 05:36:40 +08:00
if (res) {
rtnl_unlock();
wireless: register wiphy rfkill w/o holding cfg80211_mutex Otherwise lockdep complains... https://bugzilla.kernel.org/show_bug.cgi?id=17311 [ INFO: possible circular locking dependency detected ] 2.6.36-rc2-git4 #12 ------------------------------------------------------- kworker/0:3/3630 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>] rfkill_switch_all+0x24/0x49 [rfkill] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rfkill_global_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill] [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211] [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211] [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn] [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 -> #1 (cfg80211_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211] [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211] [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272 [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7 [<ffffffff8139a687>] T.723+0xbd/0x12c [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509 [<ffffffff81102b5d>] sys_ioctl+0x51/0x74 [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b -> #0 (rtnl_mutex){+.+.+.}: [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffff813396c7>] rtnl_lock+0x12/0x14 [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211] [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill] [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill] [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill] [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill] [<ffffffff81060708>] process_one_work+0x248/0x403 [<ffffffff81062620>] worker_thread+0x139/0x214 [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Johannes Berg <johannes@sipsolutions.net>
2010-08-31 05:36:40 +08:00
return res;
}
/* set up regulatory info */
wiphy_regulatory_register(wiphy);
list_add_rcu(&rdev->list, &cfg80211_rdev_list);
cfg80211_rdev_list_generation++;
/* add to debugfs */
rdev->wiphy.debugfsdir =
debugfs_create_dir(wiphy_name(&rdev->wiphy),
ieee80211_debugfs_dir);
if (IS_ERR(rdev->wiphy.debugfsdir))
rdev->wiphy.debugfsdir = NULL;
cfg80211_debugfs_rdev_add(rdev);
nl80211_notify_wiphy(rdev, NL80211_CMD_NEW_WIPHY);
cfg80211: move regulatory flags to their own variable We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-12 05:15:29 +08:00
if (wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) {
struct regulatory_request request;
request.wiphy_idx = get_wiphy_idx(wiphy);
request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
request.alpha2[0] = '9';
request.alpha2[1] = '9';
nl80211_send_reg_change_event(&request);
}
/* Check that nobody globally advertises any capabilities they do not
* advertise on all possible interface types.
*/
if (wiphy->extended_capabilities_len &&
wiphy->num_iftype_ext_capab &&
wiphy->iftype_ext_capab) {
u8 supported_on_all, j;
const struct wiphy_iftype_ext_capab *capab;
capab = wiphy->iftype_ext_capab;
for (j = 0; j < wiphy->extended_capabilities_len; j++) {
if (capab[0].extended_capabilities_len > j)
supported_on_all =
capab[0].extended_capabilities[j];
else
supported_on_all = 0x00;
for (i = 1; i < wiphy->num_iftype_ext_capab; i++) {
if (j >= capab[i].extended_capabilities_len) {
supported_on_all = 0x00;
break;
}
supported_on_all &=
capab[i].extended_capabilities[j];
}
if (WARN_ON(wiphy->extended_capabilities[j] &
~supported_on_all))
break;
}
}
mac80211: fix suspend/resume races with unregister hw Do not call ->suspend, ->resume methods after we unregister wiphy. Also delete sta_clanup timer after we finish wiphy unregister to avoid this: WARNING: at lib/debugobjects.c:262 debug_print_object+0x85/0xa0() Hardware name: 6369CTO ODEBUG: free active (active state 0) object type: timer_list hint: sta_info_cleanup+0x0/0x180 [mac80211] Modules linked in: aes_i586 aes_generic fuse bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq mperf ext2 dm_mod uinput thinkpad_acpi hwmon sg arc4 rt2800usb rt2800lib crc_ccitt rt2x00usb rt2x00lib mac80211 cfg80211 i2c_i801 iTCO_wdt iTCO_vendor_support e1000e ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom yenta_socket ahci libahci pata_acpi ata_generic ata_piix i915 drm_kms_helper drm i2c_algo_bit video [last unloaded: microcode] Pid: 5663, comm: pm-hibernate Not tainted 3.1.0-rc1-wl+ #19 Call Trace: [<c0454cfd>] warn_slowpath_common+0x6d/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c05e05e5>] ? debug_print_object+0x85/0xa0 [<c0454dae>] warn_slowpath_fmt+0x2e/0x30 [<c05e05e5>] debug_print_object+0x85/0xa0 [<f8a808e0>] ? sta_info_alloc+0x1a0/0x1a0 [mac80211] [<c05e0bd2>] debug_check_no_obj_freed+0xe2/0x180 [<c051175b>] kfree+0x8b/0x150 [<f8a126ae>] cfg80211_dev_free+0x7e/0x90 [cfg80211] [<f8a13afd>] wiphy_dev_release+0xd/0x10 [cfg80211] [<c068d959>] device_release+0x19/0x80 [<c05d06ba>] kobject_release+0x7a/0x1c0 [<c07646a8>] ? rtnl_unlock+0x8/0x10 [<f8a13adb>] ? wiphy_resume+0x6b/0x80 [cfg80211] [<c05d0640>] ? kobject_del+0x30/0x30 [<c05d1a6d>] kref_put+0x2d/0x60 [<c05d056d>] kobject_put+0x1d/0x50 [<c08015f4>] ? mutex_lock+0x14/0x40 [<c068d60f>] put_device+0xf/0x20 [<c069716a>] dpm_resume+0xca/0x160 [<c04912bd>] hibernation_snapshot+0xcd/0x260 [<c04903df>] ? freeze_processes+0x3f/0x90 [<c049151b>] hibernate+0xcb/0x1e0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c048fe60>] state_store+0xa0/0xb0 [<c048fdc0>] ? pm_async_store+0x40/0x40 [<c05d0200>] kobj_attr_store+0x20/0x30 [<c0575ea4>] sysfs_write_file+0x94/0xf0 [<c051e26a>] vfs_write+0x9a/0x160 [<c0575e10>] ? sysfs_open_file+0x200/0x200 [<c051e3fd>] sys_write+0x3d/0x70 [<c080959f>] sysenter_do_call+0x12/0x28 Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-12 20:00:59 +08:00
rdev->wiphy.registered = true;
rtnl_unlock();
res = rfkill_register(rdev->rfkill);
if (res) {
rfkill_destroy(rdev->rfkill);
rdev->rfkill = NULL;
wiphy_unregister(&rdev->wiphy);
return res;
}
return 0;
}
EXPORT_SYMBOL(wiphy_register);
void wiphy_rfkill_start_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
if (!rdev->ops->rfkill_poll)
return;
rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
rfkill_resume_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_start_polling);
void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
rfkill_pause_polling(rdev->rfkill);
}
EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
void wiphy_unregister(struct wiphy *wiphy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
wait_event(rdev->dev_wait, ({
int __count;
rtnl_lock();
__count = rdev->opencount;
rtnl_unlock();
__count == 0; }));
if (rdev->rfkill)
rfkill_unregister(rdev->rfkill);
rtnl_lock();
nl80211_notify_wiphy(rdev, NL80211_CMD_DEL_WIPHY);
rdev->wiphy.registered = false;
WARN_ON(!list_empty(&rdev->wiphy.wdev_list));
/*
* First remove the hardware from everywhere, this makes
* it impossible to find from userspace.
*/
debugfs_remove_recursive(rdev->wiphy.debugfsdir);
list_del_rcu(&rdev->list);
synchronize_rcu();
/*
* If this device got a regulatory hint tell core its
* free to listen now to a new shiny device regulatory hint
*/
wiphy_regulatory_deregister(wiphy);
cfg80211_rdev_list_generation++;
device_del(&rdev->wiphy.dev);
rtnl_unlock();
flush_work(&rdev->scan_done_wk);
cancel_work_sync(&rdev->conn_work);
flush_work(&rdev->event_work);
cancel_delayed_work_sync(&rdev->dfs_update_channels_wk);
flush_work(&rdev->destroy_work);
flush_work(&rdev->sched_scan_stop_wk);
flush_work(&rdev->mlme_unreg_wk);
#ifdef CONFIG_PM
if (rdev->wiphy.wowlan_config && rdev->ops->set_wakeup)
rdev_set_wakeup(rdev, false);
#endif
cfg80211_rdev_free_wowlan(rdev);
cfg80211_rdev_free_coalesce(rdev);
}
EXPORT_SYMBOL(wiphy_unregister);
void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
{
struct cfg80211_internal_bss *scan, *tmp;
struct cfg80211_beacon_registration *reg, *treg;
rfkill_destroy(rdev->rfkill);
list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) {
list_del(&reg->list);
kfree(reg);
}
list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&rdev->wiphy, &scan->pub);
kfree(rdev);
}
void wiphy_free(struct wiphy *wiphy)
{
put_device(&wiphy->dev);
}
EXPORT_SYMBOL(wiphy_free);
void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
if (rfkill_set_hw_state(rdev->rfkill, blocked))
schedule_work(&rdev->rfkill_sync);
}
EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
void cfg80211_unregister_wdev(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
ASSERT_RTNL();
if (WARN_ON(wdev->netdev))
return;
nl80211_notify_iface(rdev, wdev, NL80211_CMD_DEL_INTERFACE);
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
switch (wdev->iftype) {
case NL80211_IFTYPE_P2P_DEVICE:
cfg80211_mlme_purge_registrations(wdev);
cfg80211_stop_p2p_device(rdev, wdev);
break;
case NL80211_IFTYPE_NAN:
cfg80211_stop_nan(rdev, wdev);
break;
default:
WARN_ON_ONCE(1);
break;
}
}
EXPORT_SYMBOL(cfg80211_unregister_wdev);
static const struct device_type wiphy_type = {
.name = "wlan",
};
void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
enum nl80211_iftype iftype, int num)
{
ASSERT_RTNL();
rdev->num_running_ifaces += num;
if (iftype == NL80211_IFTYPE_MONITOR)
rdev->num_running_monitor_ifaces += num;
}
void __cfg80211_leave(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
struct net_device *dev = wdev->netdev;
struct cfg80211_sched_scan_request *sched_scan_req;
ASSERT_RTNL();
ASSERT_WDEV_LOCK(wdev);
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
__cfg80211_leave_ibss(rdev, dev, true);
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
sched_scan_req = rtnl_dereference(rdev->sched_scan_req);
if (sched_scan_req && dev == sched_scan_req->dev)
__cfg80211_stop_sched_scan(rdev, false);
#ifdef CONFIG_CFG80211_WEXT
kfree(wdev->wext.ie);
wdev->wext.ie = NULL;
wdev->wext.ie_len = 0;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
#endif
cfg80211_disconnect(rdev, dev,
WLAN_REASON_DEAUTH_LEAVING, true);
break;
case NL80211_IFTYPE_MESH_POINT:
__cfg80211_leave_mesh(rdev, dev);
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_P2P_GO:
__cfg80211_stop_ap(rdev, dev, true);
break;
case NL80211_IFTYPE_OCB:
__cfg80211_leave_ocb(rdev, dev);
break;
case NL80211_IFTYPE_WDS:
/* must be handled by mac80211/driver, has no APIs */
break;
case NL80211_IFTYPE_P2P_DEVICE:
case NL80211_IFTYPE_NAN:
/* cannot happen, has no netdev */
break;
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_MONITOR:
/* nothing to do */
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NUM_NL80211_IFTYPES:
/* invalid */
break;
}
}
void cfg80211_leave(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev)
{
wdev_lock(wdev);
__cfg80211_leave(rdev, wdev);
wdev_unlock(wdev);
}
void cfg80211_stop_iface(struct wiphy *wiphy, struct wireless_dev *wdev,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_event *ev;
unsigned long flags;
trace_cfg80211_stop_iface(wiphy, wdev);
ev = kzalloc(sizeof(*ev), gfp);
if (!ev)
return;
ev->type = EVENT_STOPPED;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_stop_iface);
static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
unsigned long state, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev;
struct cfg80211_sched_scan_request *sched_scan_req;
if (!wdev)
return NOTIFY_DONE;
rdev = wiphy_to_rdev(wdev->wiphy);
WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
switch (state) {
case NETDEV_POST_INIT:
SET_NETDEV_DEVTYPE(dev, &wiphy_type);
break;
case NETDEV_REGISTER:
/*
* NB: cannot take rdev->mtx here because this may be
* called within code protected by it when interfaces
* are added with nl80211.
*/
mutex_init(&wdev->mtx);
INIT_LIST_HEAD(&wdev->event_list);
spin_lock_init(&wdev->event_lock);
INIT_LIST_HEAD(&wdev->mgmt_registrations);
spin_lock_init(&wdev->mgmt_registrations_lock);
wdev->identifier = ++rdev->wdev_id;
list_add_rcu(&wdev->list, &rdev->wiphy.wdev_list);
rdev->devlist_generation++;
/* can only change netns with wiphy */
dev->features |= NETIF_F_NETNS_LOCAL;
if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
"phy80211")) {
pr_err("failed to add phy80211 symlink to netdev!\n");
}
wdev->netdev = dev;
#ifdef CONFIG_CFG80211_WEXT
wdev->wext.default_key = -1;
wdev->wext.default_mgmt_key = -1;
wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 23:58:10 +08:00
#endif
if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 23:58:10 +08:00
wdev->ps = true;
else
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 23:58:10 +08:00
wdev->ps = false;
/* allow mac80211 to determine the timeout */
wdev->ps_timeout = -1;
nl80211: add power save commands The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-17 23:58:10 +08:00
if ((wdev->iftype == NL80211_IFTYPE_STATION ||
wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
dev->priv_flags |= IFF_DONT_BRIDGE;
nl80211_notify_iface(rdev, wdev, NL80211_CMD_NEW_INTERFACE);
break;
case NETDEV_GOING_DOWN:
cfg80211_leave(rdev, wdev);
break;
case NETDEV_DOWN:
cfg80211_update_iface_num(rdev, wdev->iftype, -1);
if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
if (WARN_ON(!rdev->scan_req->notified))
rdev->scan_req->info.aborted = true;
___cfg80211_scan_done(rdev, false);
}
sched_scan_req = rtnl_dereference(rdev->sched_scan_req);
if (WARN_ON(sched_scan_req &&
sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
}
rdev->opencount--;
wake_up(&rdev->dev_wait);
break;
case NETDEV_UP:
cfg80211_update_iface_num(rdev, wdev->iftype, 1);
wdev_lock(wdev);
switch (wdev->iftype) {
#ifdef CONFIG_CFG80211_WEXT
case NL80211_IFTYPE_ADHOC:
cfg80211_ibss_wext_join(rdev, wdev);
break;
case NL80211_IFTYPE_STATION:
cfg80211_mgd_wext_connect(rdev, wdev);
break;
#endif
#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
{
/* backward compat code... */
struct mesh_setup setup;
memcpy(&setup, &default_mesh_setup,
sizeof(setup));
/* back compat only needed for mesh_id */
setup.mesh_id = wdev->ssid;
setup.mesh_id_len = wdev->mesh_id_up_len;
if (wdev->mesh_id_up_len)
__cfg80211_join_mesh(rdev, dev,
&setup,
&default_mesh_config);
break;
}
#endif
default:
break;
}
wdev_unlock(wdev);
rdev->opencount++;
/*
* Configure power management to the driver here so that its
* correctly set also after interface type changes etc.
*/
if ((wdev->iftype == NL80211_IFTYPE_STATION ||
wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
rdev->ops->set_power_mgmt)
if (rdev_set_power_mgmt(rdev, dev, wdev->ps,
wdev->ps_timeout)) {
/* assume this means it's off */
wdev->ps = false;
}
break;
case NETDEV_UNREGISTER:
/*
* It is possible to get NETDEV_UNREGISTER
* multiple times. To detect that, check
* that the interface is still on the list
* of registered interfaces, and only then
* remove and clean it up.
*/
if (!list_empty(&wdev->list)) {
nl80211_notify_iface(rdev, wdev,
NL80211_CMD_DEL_INTERFACE);
sysfs_remove_link(&dev->dev.kobj, "phy80211");
list_del_rcu(&wdev->list);
rdev->devlist_generation++;
cfg80211_mlme_purge_registrations(wdev);
#ifdef CONFIG_CFG80211_WEXT
kzfree(wdev->wext.keys);
#endif
}
/*
* synchronise (so that we won't find this netdev
* from other code any more) and then clear the list
* head so that the above code can safely check for
* !list_empty() to avoid double-cleanup.
*/
synchronize_rcu();
INIT_LIST_HEAD(&wdev->list);
/*
* Ensure that all events have been processed and
* freed.
*/
cfg80211_process_wdev_events(wdev);
if (WARN_ON(wdev->current_bss)) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
}
break;
case NETDEV_PRE_UP:
if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
return notifier_from_errno(-EOPNOTSUPP);
if (rfkill_blocked(rdev->rfkill))
return notifier_from_errno(-ERFKILL);
break;
default:
return NOTIFY_DONE;
}
wireless_nlevent_flush();
return NOTIFY_OK;
}
static struct notifier_block cfg80211_netdev_notifier = {
.notifier_call = cfg80211_netdev_notifier_call,
};
static void __net_exit cfg80211_pernet_exit(struct net *net)
{
struct cfg80211_registered_device *rdev;
rtnl_lock();
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
if (net_eq(wiphy_net(&rdev->wiphy), net))
WARN_ON(cfg80211_switch_netns(rdev, &init_net));
}
rtnl_unlock();
}
static struct pernet_operations cfg80211_pernet_ops = {
.exit = cfg80211_pernet_exit,
};
static int __init cfg80211_init(void)
{
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
int err;
err = register_pernet_device(&cfg80211_pernet_ops);
if (err)
goto out_fail_pernet;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
err = wiphy_sysfs_init();
if (err)
goto out_fail_sysfs;
err = register_netdevice_notifier(&cfg80211_netdev_notifier);
if (err)
goto out_fail_notifier;
err = nl80211_init();
if (err)
goto out_fail_nl80211;
ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
err = regulatory_init();
if (err)
goto out_fail_reg;
cfg80211_wq = alloc_ordered_workqueue("cfg80211", WQ_MEM_RECLAIM);
if (!cfg80211_wq) {
err = -ENOMEM;
goto out_fail_wq;
}
return 0;
out_fail_wq:
regulatory_exit();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
out_fail_reg:
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
out_fail_nl80211:
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
out_fail_notifier:
wiphy_sysfs_exit();
out_fail_sysfs:
unregister_pernet_device(&cfg80211_pernet_ops);
out_fail_pernet:
return err;
}
subsys_initcall(cfg80211_init);
static void __exit cfg80211_exit(void)
{
debugfs_remove(ieee80211_debugfs_dir);
nl80211_exit();
unregister_netdevice_notifier(&cfg80211_netdev_notifier);
wiphy_sysfs_exit();
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 14:19:48 +08:00
regulatory_exit();
unregister_pernet_device(&cfg80211_pernet_ops);
destroy_workqueue(cfg80211_wq);
}
module_exit(cfg80211_exit);