linux-sg2042/drivers/net/netdevsim/netdevsim.h

247 lines
6.0 KiB
C
Raw Normal View History

/*
* Copyright (C) 2017 Netronome Systems, Inc.
*
* This software is licensed under the GNU General License Version 2,
* June 1991 as shown in the file COPYING in the top-level directory of this
* source tree.
*
* THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
* OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
* THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/u64_stats_sync.h>
#include <net/devlink.h>
#include <net/xdp.h>
#define DRV_NAME "netdevsim"
#define NSIM_XDP_MAX_MTU 4000
#define NSIM_EA(extack, msg) NL_SET_ERR_MSG_MOD((extack), msg)
#define NSIM_IPSEC_MAX_SA_COUNT 33
#define NSIM_IPSEC_VALID BIT(31)
struct nsim_sa {
struct xfrm_state *xs;
__be32 ipaddr[4];
u32 key[4];
u32 salt;
bool used;
bool crypt;
bool rx;
};
struct nsim_ipsec {
struct nsim_sa sa[NSIM_IPSEC_MAX_SA_COUNT];
struct dentry *pfile;
u32 count;
u32 tx;
u32 ok;
};
struct netdevsim {
struct net_device *netdev;
struct nsim_dev *nsim_dev;
struct nsim_dev_port *nsim_dev_port;
u64 tx_packets;
u64 tx_bytes;
struct u64_stats_sync syncp;
struct nsim_bus_dev *nsim_bus_dev;
struct bpf_prog *bpf_offloaded;
u32 bpf_offloaded_id;
struct xdp_attachment_info xdp;
struct xdp_attachment_info xdp_hw;
bool bpf_tc_accept;
bool bpf_tc_non_bound_accept;
bool bpf_xdpdrv_accept;
bool bpf_xdpoffload_accept;
bool bpf_map_accept;
struct nsim_ipsec ipsec;
};
struct netdevsim *
nsim_create(struct nsim_dev *nsim_dev, struct nsim_dev_port *nsim_dev_port);
void nsim_destroy(struct netdevsim *ns);
#ifdef CONFIG_BPF_SYSCALL
int nsim_bpf_dev_init(struct nsim_dev *nsim_dev);
void nsim_bpf_dev_exit(struct nsim_dev *nsim_dev);
int nsim_bpf_init(struct netdevsim *ns);
void nsim_bpf_uninit(struct netdevsim *ns);
int nsim_bpf(struct net_device *dev, struct netdev_bpf *bpf);
int nsim_bpf_disable_tc(struct netdevsim *ns);
int nsim_bpf_setup_tc_block_cb(enum tc_setup_type type,
void *type_data, void *cb_priv);
#else
static inline int nsim_bpf_dev_init(struct nsim_dev *nsim_dev)
{
return 0;
}
static inline void nsim_bpf_dev_exit(struct nsim_dev *nsim_dev)
{
}
static inline int nsim_bpf_init(struct netdevsim *ns)
{
return 0;
}
static inline void nsim_bpf_uninit(struct netdevsim *ns)
{
}
static inline int nsim_bpf(struct net_device *dev, struct netdev_bpf *bpf)
{
return bpf->command == XDP_QUERY_PROG ? 0 : -EOPNOTSUPP;
}
static inline int nsim_bpf_disable_tc(struct netdevsim *ns)
{
return 0;
}
static inline int
nsim_bpf_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
void *cb_priv)
{
return -EOPNOTSUPP;
}
#endif
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
enum nsim_resource_id {
NSIM_RESOURCE_NONE, /* DEVLINK_RESOURCE_ID_PARENT_TOP */
NSIM_RESOURCE_IPV4,
NSIM_RESOURCE_IPV4_FIB,
NSIM_RESOURCE_IPV4_FIB_RULES,
NSIM_RESOURCE_IPV6,
NSIM_RESOURCE_IPV6_FIB,
NSIM_RESOURCE_IPV6_FIB_RULES,
};
struct nsim_dev_health {
struct devlink_health_reporter *empty_reporter;
struct devlink_health_reporter *dummy_reporter;
struct dentry *ddir;
char *recovered_break_msg;
u32 binary_len;
bool fail_recover;
};
int nsim_dev_health_init(struct nsim_dev *nsim_dev, struct devlink *devlink);
void nsim_dev_health_exit(struct nsim_dev *nsim_dev);
struct nsim_dev_port {
struct list_head list;
struct devlink_port devlink_port;
unsigned int port_index;
struct dentry *ddir;
struct netdevsim *ns;
};
struct nsim_dev {
struct nsim_bus_dev *nsim_bus_dev;
struct nsim_fib_data *fib_data;
struct nsim_trap_data *trap_data;
struct dentry *ddir;
struct dentry *ports_ddir;
struct bpf_offload_dev *bpf_dev;
bool bpf_bind_accept;
u32 bpf_bind_verifier_delay;
struct dentry *ddir_bpf_bound_progs;
u32 prog_id_gen;
struct list_head bpf_bound_progs;
struct list_head bpf_bound_maps;
struct netdev_phys_item_id switch_id;
struct list_head port_list;
struct mutex port_list_lock; /* protects port list */
bool fw_update_status;
u32 max_macs;
bool test1;
bool dont_allow_reload;
bool fail_reload;
struct devlink_region *dummy_region;
struct nsim_dev_health health;
};
static inline struct net *nsim_dev_net(struct nsim_dev *nsim_dev)
{
return devlink_net(priv_to_devlink(nsim_dev));
}
int nsim_dev_init(void);
void nsim_dev_exit(void);
int nsim_dev_probe(struct nsim_bus_dev *nsim_bus_dev);
void nsim_dev_remove(struct nsim_bus_dev *nsim_bus_dev);
int nsim_dev_port_add(struct nsim_bus_dev *nsim_bus_dev,
unsigned int port_index);
int nsim_dev_port_del(struct nsim_bus_dev *nsim_bus_dev,
unsigned int port_index);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
struct nsim_fib_data *nsim_fib_create(struct devlink *devlink,
struct netlink_ext_ack *extack);
void nsim_fib_destroy(struct devlink *devlink, struct nsim_fib_data *fib_data);
u64 nsim_fib_get_val(struct nsim_fib_data *fib_data,
enum nsim_resource_id res_id, bool max);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#if IS_ENABLED(CONFIG_XFRM_OFFLOAD)
void nsim_ipsec_init(struct netdevsim *ns);
void nsim_ipsec_teardown(struct netdevsim *ns);
bool nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb);
#else
static inline void nsim_ipsec_init(struct netdevsim *ns)
{
}
static inline void nsim_ipsec_teardown(struct netdevsim *ns)
{
}
static inline bool nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb)
{
return true;
}
#endif
struct nsim_vf_config {
int link_state;
u16 min_tx_rate;
u16 max_tx_rate;
u16 vlan;
__be16 vlan_proto;
u16 qos;
u8 vf_mac[ETH_ALEN];
bool spoofchk_enabled;
bool trusted;
bool rss_query_enabled;
};
struct nsim_bus_dev {
struct device dev;
struct list_head list;
unsigned int port_count;
struct net *initial_net; /* Purpose of this is to carry net pointer
* during the probe time only.
*/
unsigned int num_vfs;
struct nsim_vf_config *vfconfigs;
};
int nsim_bus_init(void);
void nsim_bus_exit(void);