linux-sg2042/drivers/net/usb/sierra_net.c

963 lines
27 KiB
C
Raw Normal View History

net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
/*
* USB-to-WWAN Driver for Sierra Wireless modems
*
* Copyright (C) 2008, 2009, 2010 Paxton Smith, Matthew Safar, Rory Filer
* <linux@sierrawireless.com>
*
* Portions of this based on the cdc_ether driver by David Brownell (2003-2005)
* and Ole Andre Vadla Ravnas (ActiveSync) (2006).
*
* IMPORTANT DISCLAIMER: This driver is not commercially supported by
* Sierra Wireless. Use at your own risk.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define DRIVER_VERSION "v.2.0"
#define DRIVER_AUTHOR "Paxton Smith, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB-to-WWAN Driver for Sierra Wireless modems"
static const char driver_name[] = "sierra_net";
/* if defined debug messages enabled */
/*#define DEBUG*/
#include <linux/module.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <net/ip.h>
#include <net/udp.h>
#include <asm/unaligned.h>
#include <linux/usb/usbnet.h>
#define SWI_USB_REQUEST_GET_FW_ATTR 0x06
#define SWI_GET_FW_ATTR_MASK 0x08
/* atomic counter partially included in MAC address to make sure 2 devices
* do not end up with the same MAC - concept breaks in case of > 255 ifaces
*/
static atomic_t iface_counter = ATOMIC_INIT(0);
/*
* SYNC Timer Delay definition used to set the expiry time
*/
#define SIERRA_NET_SYNCDELAY (2*HZ)
/* Max. MTU supported. The modem buffers are limited to 1500 */
#define SIERRA_NET_MAX_SUPPORTED_MTU 1500
/* The SIERRA_NET_USBCTL_BUF_LEN defines a buffer size allocated for control
* message reception ... and thus the max. received packet.
* (May be the cause for parse_hip returning -EINVAL)
*/
#define SIERRA_NET_USBCTL_BUF_LEN 1024
/* Overriding the default usbnet rx_urb_size */
#define SIERRA_NET_RX_URB_SIZE (8 * 1024)
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
/* Private data structure */
struct sierra_net_data {
u8 ethr_hdr_tmpl[ETH_HLEN]; /* ethernet header template for rx'd pkts */
u16 link_up; /* air link up or down */
u8 tx_hdr_template[4]; /* part of HIP hdr for tx'd packets */
u8 sync_msg[4]; /* SYNC message */
u8 shdwn_msg[4]; /* Shutdown message */
/* Backpointer to the container */
struct usbnet *usbnet;
u8 ifnum; /* interface number */
/* Bit masks, must be a power of 2 */
#define SIERRA_NET_EVENT_RESP_AVAIL 0x01
#define SIERRA_NET_TIMER_EXPIRY 0x02
unsigned long kevent_flags;
struct work_struct sierra_net_kevent;
struct timer_list sync_timer; /* For retrying SYNC sequence */
};
struct param {
int is_present;
union {
void *ptr;
u32 dword;
u16 word;
u8 byte;
};
};
/* HIP message type */
#define SIERRA_NET_HIP_EXTENDEDID 0x7F
#define SIERRA_NET_HIP_HSYNC_ID 0x60 /* Modem -> host */
#define SIERRA_NET_HIP_RESTART_ID 0x62 /* Modem -> host */
#define SIERRA_NET_HIP_MSYNC_ID 0x20 /* Host -> modem */
#define SIERRA_NET_HIP_SHUTD_ID 0x26 /* Host -> modem */
#define SIERRA_NET_HIP_EXT_IP_IN_ID 0x0202
#define SIERRA_NET_HIP_EXT_IP_OUT_ID 0x0002
/* 3G UMTS Link Sense Indication definitions */
#define SIERRA_NET_HIP_LSI_UMTSID 0x78
/* Reverse Channel Grant Indication HIP message */
#define SIERRA_NET_HIP_RCGI 0x64
/* LSI Protocol types */
#define SIERRA_NET_PROTOCOL_UMTS 0x01
/* LSI Coverage */
#define SIERRA_NET_COVERAGE_NONE 0x00
#define SIERRA_NET_COVERAGE_NOPACKET 0x01
/* LSI Session */
#define SIERRA_NET_SESSION_IDLE 0x00
/* LSI Link types */
#define SIERRA_NET_AS_LINK_TYPE_IPv4 0x00
struct lsi_umts {
u8 protocol;
u8 unused1;
__be16 length;
/* eventually use a union for the rest - assume umts for now */
u8 coverage;
u8 unused2[41];
u8 session_state;
u8 unused3[33];
u8 link_type;
u8 pdp_addr_len; /* NW-supplied PDP address len */
u8 pdp_addr[16]; /* NW-supplied PDP address (bigendian)) */
u8 unused4[23];
u8 dns1_addr_len; /* NW-supplied 1st DNS address len (bigendian) */
u8 dns1_addr[16]; /* NW-supplied 1st DNS address */
u8 dns2_addr_len; /* NW-supplied 2nd DNS address len */
u8 dns2_addr[16]; /* NW-supplied 2nd DNS address (bigendian)*/
u8 wins1_addr_len; /* NW-supplied 1st Wins address len */
u8 wins1_addr[16]; /* NW-supplied 1st Wins address (bigendian)*/
u8 wins2_addr_len; /* NW-supplied 2nd Wins address len */
u8 wins2_addr[16]; /* NW-supplied 2nd Wins address (bigendian) */
u8 unused5[4];
u8 gw_addr_len; /* NW-supplied GW address len */
u8 gw_addr[16]; /* NW-supplied GW address (bigendian) */
u8 reserved[8];
} __packed;
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
#define SIERRA_NET_LSI_COMMON_LEN 4
#define SIERRA_NET_LSI_UMTS_LEN (sizeof(struct lsi_umts))
#define SIERRA_NET_LSI_UMTS_STATUS_LEN \
(SIERRA_NET_LSI_UMTS_LEN - SIERRA_NET_LSI_COMMON_LEN)
/* Forward definitions */
static void sierra_sync_timer(unsigned long syncdata);
static int sierra_net_change_mtu(struct net_device *net, int new_mtu);
/* Our own net device operations structure */
static const struct net_device_ops sierra_net_device_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = sierra_net_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
/* get private data associated with passed in usbnet device */
static inline struct sierra_net_data *sierra_net_get_private(struct usbnet *dev)
{
return (struct sierra_net_data *)dev->data[0];
}
/* set private data associated with passed in usbnet device */
static inline void sierra_net_set_private(struct usbnet *dev,
struct sierra_net_data *priv)
{
dev->data[0] = (unsigned long)priv;
}
/* is packet IPv4 */
static inline int is_ip(struct sk_buff *skb)
{
return skb->protocol == cpu_to_be16(ETH_P_IP);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
}
/*
* check passed in packet and make sure that:
* - it is linear (no scatter/gather)
* - it is ethernet (mac_header properly set)
*/
static int check_ethip_packet(struct sk_buff *skb, struct usbnet *dev)
{
skb_reset_mac_header(skb); /* ethernet header */
if (skb_is_nonlinear(skb)) {
netdev_err(dev->net, "Non linear buffer-dropping\n");
return 0;
}
if (!pskb_may_pull(skb, ETH_HLEN))
return 0;
skb->protocol = eth_hdr(skb)->h_proto;
return 1;
}
static const u8 *save16bit(struct param *p, const u8 *datap)
{
p->is_present = 1;
p->word = get_unaligned_be16(datap);
return datap + sizeof(p->word);
}
static const u8 *save8bit(struct param *p, const u8 *datap)
{
p->is_present = 1;
p->byte = *datap;
return datap + sizeof(p->byte);
}
/*----------------------------------------------------------------------------*
* BEGIN HIP *
*----------------------------------------------------------------------------*/
/* HIP header */
#define SIERRA_NET_HIP_HDR_LEN 4
/* Extended HIP header */
#define SIERRA_NET_HIP_EXT_HDR_LEN 6
struct hip_hdr {
int hdrlen;
struct param payload_len;
struct param msgid;
struct param msgspecific;
struct param extmsgid;
};
static int parse_hip(const u8 *buf, const u32 buflen, struct hip_hdr *hh)
{
const u8 *curp = buf;
int padded;
if (buflen < SIERRA_NET_HIP_HDR_LEN)
return -EPROTO;
curp = save16bit(&hh->payload_len, curp);
curp = save8bit(&hh->msgid, curp);
curp = save8bit(&hh->msgspecific, curp);
padded = hh->msgid.byte & 0x80;
hh->msgid.byte &= 0x7F; /* 7 bits */
hh->extmsgid.is_present = (hh->msgid.byte == SIERRA_NET_HIP_EXTENDEDID);
if (hh->extmsgid.is_present) {
if (buflen < SIERRA_NET_HIP_EXT_HDR_LEN)
return -EPROTO;
hh->payload_len.word &= 0x3FFF; /* 14 bits */
curp = save16bit(&hh->extmsgid, curp);
hh->extmsgid.word &= 0x03FF; /* 10 bits */
hh->hdrlen = SIERRA_NET_HIP_EXT_HDR_LEN;
} else {
hh->payload_len.word &= 0x07FF; /* 11 bits */
hh->hdrlen = SIERRA_NET_HIP_HDR_LEN;
}
if (padded) {
hh->hdrlen++;
hh->payload_len.word--;
}
/* if real packet shorter than the claimed length */
if (buflen < (hh->hdrlen + hh->payload_len.word))
return -EINVAL;
return 0;
}
static void build_hip(u8 *buf, const u16 payloadlen,
struct sierra_net_data *priv)
{
/* the following doesn't have the full functionality. We
* currently build only one kind of header, so it is faster this way
*/
put_unaligned_be16(payloadlen, buf);
memcpy(buf+2, priv->tx_hdr_template, sizeof(priv->tx_hdr_template));
}
/*----------------------------------------------------------------------------*
* END HIP *
*----------------------------------------------------------------------------*/
static int sierra_net_send_cmd(struct usbnet *dev,
u8 *cmd, int cmdlen, const char * cmd_name)
{
struct sierra_net_data *priv = sierra_net_get_private(dev);
int status;
status = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
USB_CDC_SEND_ENCAPSULATED_COMMAND,
USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE, 0,
priv->ifnum, cmd, cmdlen, USB_CTRL_SET_TIMEOUT);
if (status != cmdlen && status != -ENODEV)
netdev_err(dev->net, "Submit %s failed %d\n", cmd_name, status);
return status;
}
static int sierra_net_send_sync(struct usbnet *dev)
{
int status;
struct sierra_net_data *priv = sierra_net_get_private(dev);
dev_dbg(&dev->udev->dev, "%s", __func__);
status = sierra_net_send_cmd(dev, priv->sync_msg,
sizeof(priv->sync_msg), "SYNC");
return status;
}
static void sierra_net_set_ctx_index(struct sierra_net_data *priv, u8 ctx_ix)
{
dev_dbg(&(priv->usbnet->udev->dev), "%s %d", __func__, ctx_ix);
priv->tx_hdr_template[0] = 0x3F;
priv->tx_hdr_template[1] = ctx_ix;
*((u16 *)&priv->tx_hdr_template[2]) =
cpu_to_be16(SIERRA_NET_HIP_EXT_IP_OUT_ID);
}
static inline int sierra_net_is_valid_addrlen(u8 len)
{
return len == sizeof(struct in_addr);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
}
static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen)
{
struct lsi_umts *lsi = (struct lsi_umts *)data;
if (datalen < sizeof(struct lsi_umts)) {
netdev_err(dev->net, "%s: Data length %d, exp %Zu\n",
__func__, datalen,
sizeof(struct lsi_umts));
return -1;
}
if (lsi->length != cpu_to_be16(SIERRA_NET_LSI_UMTS_STATUS_LEN)) {
netdev_err(dev->net, "%s: LSI_UMTS_STATUS_LEN %d, exp %u\n",
__func__, be16_to_cpu(lsi->length),
(u32)SIERRA_NET_LSI_UMTS_STATUS_LEN);
return -1;
}
/* Validate the protocol - only support UMTS for now */
if (lsi->protocol != SIERRA_NET_PROTOCOL_UMTS) {
netdev_err(dev->net, "Protocol unsupported, 0x%02x\n",
lsi->protocol);
return -1;
}
/* Validate the link type */
if (lsi->link_type != SIERRA_NET_AS_LINK_TYPE_IPv4) {
netdev_err(dev->net, "Link type unsupported: 0x%02x\n",
lsi->link_type);
return -1;
}
/* Validate the coverage */
if (lsi->coverage == SIERRA_NET_COVERAGE_NONE
|| lsi->coverage == SIERRA_NET_COVERAGE_NOPACKET) {
netdev_err(dev->net, "No coverage, 0x%02x\n", lsi->coverage);
return 0;
}
/* Validate the session state */
if (lsi->session_state == SIERRA_NET_SESSION_IDLE) {
netdev_err(dev->net, "Session idle, 0x%02x\n",
lsi->session_state);
return 0;
}
/* Set link_sense true */
return 1;
}
static void sierra_net_handle_lsi(struct usbnet *dev, char *data,
struct hip_hdr *hh)
{
struct sierra_net_data *priv = sierra_net_get_private(dev);
int link_up;
link_up = sierra_net_parse_lsi(dev, data + hh->hdrlen,
hh->payload_len.word);
if (link_up < 0) {
netdev_err(dev->net, "Invalid LSI\n");
return;
}
if (link_up) {
sierra_net_set_ctx_index(priv, hh->msgspecific.byte);
priv->link_up = 1;
netif_carrier_on(dev->net);
} else {
priv->link_up = 0;
netif_carrier_off(dev->net);
}
}
static void sierra_net_dosync(struct usbnet *dev)
{
int status;
struct sierra_net_data *priv = sierra_net_get_private(dev);
dev_dbg(&dev->udev->dev, "%s", __func__);
/* tell modem we are ready */
status = sierra_net_send_sync(dev);
if (status < 0)
netdev_err(dev->net,
"Send SYNC failed, status %d\n", status);
status = sierra_net_send_sync(dev);
if (status < 0)
netdev_err(dev->net,
"Send SYNC failed, status %d\n", status);
/* Now, start a timer and make sure we get the Restart Indication */
priv->sync_timer.function = sierra_sync_timer;
priv->sync_timer.data = (unsigned long) dev;
priv->sync_timer.expires = jiffies + SIERRA_NET_SYNCDELAY;
add_timer(&priv->sync_timer);
}
static void sierra_net_kevent(struct work_struct *work)
{
struct sierra_net_data *priv =
container_of(work, struct sierra_net_data, sierra_net_kevent);
struct usbnet *dev = priv->usbnet;
int len;
int err;
u8 *buf;
u8 ifnum;
if (test_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags)) {
clear_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags);
/* Query the modem for the LSI message */
buf = kzalloc(SIERRA_NET_USBCTL_BUF_LEN, GFP_KERNEL);
if (!buf) {
netdev_err(dev->net,
"failed to allocate buf for LS msg\n");
return;
}
ifnum = priv->ifnum;
len = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
USB_CDC_GET_ENCAPSULATED_RESPONSE,
USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
0, ifnum, buf, SIERRA_NET_USBCTL_BUF_LEN,
USB_CTRL_SET_TIMEOUT);
if (len < 0) {
netdev_err(dev->net,
"usb_control_msg failed, status %d\n", len);
} else {
struct hip_hdr hh;
dev_dbg(&dev->udev->dev, "%s: Received status message,"
" %04x bytes", __func__, len);
err = parse_hip(buf, len, &hh);
if (err) {
netdev_err(dev->net, "%s: Bad packet,"
" parse result %d\n", __func__, err);
kfree(buf);
return;
}
/* Validate packet length */
if (len != hh.hdrlen + hh.payload_len.word) {
netdev_err(dev->net, "%s: Bad packet, received"
" %d, expected %d\n", __func__, len,
hh.hdrlen + hh.payload_len.word);
kfree(buf);
return;
}
/* Switch on received message types */
switch (hh.msgid.byte) {
case SIERRA_NET_HIP_LSI_UMTSID:
dev_dbg(&dev->udev->dev, "LSI for ctx:%d",
hh.msgspecific.byte);
sierra_net_handle_lsi(dev, buf, &hh);
break;
case SIERRA_NET_HIP_RESTART_ID:
dev_dbg(&dev->udev->dev, "Restart reported: %d,"
" stopping sync timer",
hh.msgspecific.byte);
/* Got sync resp - stop timer & clear mask */
del_timer_sync(&priv->sync_timer);
clear_bit(SIERRA_NET_TIMER_EXPIRY,
&priv->kevent_flags);
break;
case SIERRA_NET_HIP_HSYNC_ID:
dev_dbg(&dev->udev->dev, "SYNC received");
err = sierra_net_send_sync(dev);
if (err < 0)
netdev_err(dev->net,
"Send SYNC failed %d\n", err);
break;
case SIERRA_NET_HIP_EXTENDEDID:
netdev_err(dev->net, "Unrecognized HIP msg, "
"extmsgid 0x%04x\n", hh.extmsgid.word);
break;
case SIERRA_NET_HIP_RCGI:
/* Ignored */
break;
default:
netdev_err(dev->net, "Unrecognized HIP msg, "
"msgid 0x%02x\n", hh.msgid.byte);
break;
}
}
kfree(buf);
}
/* The sync timer bit might be set */
if (test_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags)) {
clear_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags);
dev_dbg(&dev->udev->dev, "Deferred sync timer expiry");
sierra_net_dosync(priv->usbnet);
}
if (priv->kevent_flags)
dev_dbg(&dev->udev->dev, "sierra_net_kevent done, "
"kevent_flags = 0x%lx", priv->kevent_flags);
}
static void sierra_net_defer_kevent(struct usbnet *dev, int work)
{
struct sierra_net_data *priv = sierra_net_get_private(dev);
set_bit(work, &priv->kevent_flags);
schedule_work(&priv->sierra_net_kevent);
}
/*
* Sync Retransmit Timer Handler. On expiry, kick the work queue
*/
static void sierra_sync_timer(unsigned long syncdata)
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
{
struct usbnet *dev = (struct usbnet *)syncdata;
dev_dbg(&dev->udev->dev, "%s", __func__);
/* Kick the tasklet */
sierra_net_defer_kevent(dev, SIERRA_NET_TIMER_EXPIRY);
}
static void sierra_net_status(struct usbnet *dev, struct urb *urb)
{
struct usb_cdc_notification *event;
dev_dbg(&dev->udev->dev, "%s", __func__);
if (urb->actual_length < sizeof *event)
return;
/* Add cases to handle other standard notifications. */
event = urb->transfer_buffer;
switch (event->bNotificationType) {
case USB_CDC_NOTIFY_NETWORK_CONNECTION:
case USB_CDC_NOTIFY_SPEED_CHANGE:
/* USB 305 sends those */
break;
case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
sierra_net_defer_kevent(dev, SIERRA_NET_EVENT_RESP_AVAIL);
break;
default:
netdev_err(dev->net, ": unexpected notification %02x!\n",
event->bNotificationType);
break;
}
}
static void sierra_net_get_drvinfo(struct net_device *net,
struct ethtool_drvinfo *info)
{
/* Inherit standard device info */
usbnet_get_drvinfo(net, info);
strncpy(info->driver, driver_name, sizeof info->driver);
strncpy(info->version, DRIVER_VERSION, sizeof info->version);
}
static u32 sierra_net_get_link(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
/* Report link is down whenever the interface is down */
return sierra_net_get_private(dev)->link_up && netif_running(net);
}
static const struct ethtool_ops sierra_net_ethtool_ops = {
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
.get_drvinfo = sierra_net_get_drvinfo,
.get_link = sierra_net_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.nway_reset = usbnet_nway_reset,
};
/* MTU can not be more than 1500 bytes, enforce it. */
static int sierra_net_change_mtu(struct net_device *net, int new_mtu)
{
if (new_mtu > SIERRA_NET_MAX_SUPPORTED_MTU)
return -EINVAL;
return usbnet_change_mtu(net, new_mtu);
}
static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
{
int result = 0;
u16 *attrdata;
attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL);
if (!attrdata)
return -ENOMEM;
result = usb_control_msg(
dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
/* _u8 vendor specific request */
SWI_USB_REQUEST_GET_FW_ATTR,
USB_DIR_IN | USB_TYPE_VENDOR, /* __u8 request type */
0x0000, /* __u16 value not used */
0x0000, /* __u16 index not used */
attrdata, /* char *data */
sizeof(*attrdata), /* __u16 size */
USB_CTRL_SET_TIMEOUT); /* int timeout */
if (result < 0) {
kfree(attrdata);
return -EIO;
}
*datap = le16_to_cpu(*attrdata);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
kfree(attrdata);
return result;
}
/*
* collects the bulk endpoints, the status endpoint.
*/
static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
{
u8 ifacenum;
u8 numendpoints;
u16 fwattr = 0;
int status;
struct ethhdr *eth;
struct sierra_net_data *priv;
static const u8 sync_tmplate[sizeof(priv->sync_msg)] = {
0x00, 0x00, SIERRA_NET_HIP_MSYNC_ID, 0x00};
static const u8 shdwn_tmplate[sizeof(priv->shdwn_msg)] = {
0x00, 0x00, SIERRA_NET_HIP_SHUTD_ID, 0x00};
dev_dbg(&dev->udev->dev, "%s", __func__);
ifacenum = intf->cur_altsetting->desc.bInterfaceNumber;
numendpoints = intf->cur_altsetting->desc.bNumEndpoints;
/* We have three endpoints, bulk in and out, and a status */
if (numendpoints != 3) {
dev_err(&dev->udev->dev, "Expected 3 endpoints, found: %d",
numendpoints);
return -ENODEV;
}
/* Status endpoint set in usbnet_get_endpoints() */
dev->status = NULL;
status = usbnet_get_endpoints(dev, intf);
if (status < 0) {
dev_err(&dev->udev->dev, "Error in usbnet_get_endpoints (%d)",
status);
return -ENODEV;
}
/* Initialize sierra private data */
priv = kzalloc(sizeof *priv, GFP_KERNEL);
if (!priv) {
dev_err(&dev->udev->dev, "No memory");
return -ENOMEM;
}
priv->usbnet = dev;
priv->ifnum = ifacenum;
dev->net->netdev_ops = &sierra_net_device_ops;
/* change MAC addr to include, ifacenum, and to be unique */
dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return(&iface_counter);
dev->net->dev_addr[ETH_ALEN-1] = ifacenum;
/* we will have to manufacture ethernet headers, prepare template */
eth = (struct ethhdr *)priv->ethr_hdr_tmpl;
memcpy(&eth->h_dest, dev->net->dev_addr, ETH_ALEN);
eth->h_proto = cpu_to_be16(ETH_P_IP);
/* prepare shutdown message template */
memcpy(priv->shdwn_msg, shdwn_tmplate, sizeof(priv->shdwn_msg));
/* set context index initially to 0 - prepares tx hdr template */
sierra_net_set_ctx_index(priv, 0);
/* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */
dev->rx_urb_size = SIERRA_NET_RX_URB_SIZE;
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
if (dev->udev->speed != USB_SPEED_HIGH)
dev->rx_urb_size = min_t(size_t, 4096, SIERRA_NET_RX_URB_SIZE);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
dev->net->hard_header_len += SIERRA_NET_HIP_EXT_HDR_LEN;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
/* Set up the netdev */
dev->net->flags |= IFF_NOARP;
dev->net->ethtool_ops = &sierra_net_ethtool_ops;
netif_carrier_off(dev->net);
sierra_net_set_private(dev, priv);
priv->kevent_flags = 0;
/* Use the shared workqueue */
INIT_WORK(&priv->sierra_net_kevent, sierra_net_kevent);
/* Only need to do this once */
init_timer(&priv->sync_timer);
/* verify fw attributes */
status = sierra_net_get_fw_attr(dev, &fwattr);
dev_dbg(&dev->udev->dev, "Fw attr: %x\n", fwattr);
/* test whether firmware supports DHCP */
if (!(status == sizeof(fwattr) && (fwattr & SWI_GET_FW_ATTR_MASK))) {
/* found incompatible firmware version */
dev_err(&dev->udev->dev, "Incompatible driver and firmware"
" versions\n");
kfree(priv);
return -ENODEV;
}
/* prepare sync message from template */
memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
/* initiate the sync sequence */
sierra_net_dosync(dev);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
return 0;
}
static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf)
{
int status;
struct sierra_net_data *priv = sierra_net_get_private(dev);
dev_dbg(&dev->udev->dev, "%s", __func__);
/* kill the timer and work */
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
del_timer_sync(&priv->sync_timer);
cancel_work_sync(&priv->sierra_net_kevent);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
/* tell modem we are going away */
status = sierra_net_send_cmd(dev, priv->shdwn_msg,
sizeof(priv->shdwn_msg), "Shutdown");
if (status < 0)
netdev_err(dev->net,
"usb_control_msg failed, status %d\n", status);
sierra_net_set_private(dev, NULL);
kfree(priv);
}
static struct sk_buff *sierra_net_skb_clone(struct usbnet *dev,
struct sk_buff *skb, int len)
{
struct sk_buff *new_skb;
/* clone skb */
new_skb = skb_clone(skb, GFP_ATOMIC);
/* remove len bytes from original */
skb_pull(skb, len);
/* trim next packet to it's length */
if (new_skb) {
skb_trim(new_skb, len);
} else {
if (netif_msg_rx_err(dev))
netdev_err(dev->net, "failed to get skb\n");
dev->net->stats.rx_dropped++;
}
return new_skb;
}
/* ---------------------------- Receive data path ----------------------*/
static int sierra_net_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
int err;
struct hip_hdr hh;
struct sk_buff *new_skb;
dev_dbg(&dev->udev->dev, "%s", __func__);
/* could contain multiple packets */
while (likely(skb->len)) {
err = parse_hip(skb->data, skb->len, &hh);
if (err) {
if (netif_msg_rx_err(dev))
netdev_err(dev->net, "Invalid HIP header %d\n",
err);
/* dev->net->stats.rx_errors incremented by caller */
dev->net->stats.rx_length_errors++;
return 0;
}
/* Validate Extended HIP header */
if (!hh.extmsgid.is_present
|| hh.extmsgid.word != SIERRA_NET_HIP_EXT_IP_IN_ID) {
if (netif_msg_rx_err(dev))
netdev_err(dev->net, "HIP/ETH: Invalid pkt\n");
dev->net->stats.rx_frame_errors++;
/* dev->net->stats.rx_errors incremented by caller */
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
return 0;
}
skb_pull(skb, hh.hdrlen);
/* We are going to accept this packet, prepare it */
memcpy(skb->data, sierra_net_get_private(dev)->ethr_hdr_tmpl,
ETH_HLEN);
/* Last packet in batch handled by usbnet */
if (hh.payload_len.word == skb->len)
return 1;
new_skb = sierra_net_skb_clone(dev, skb, hh.payload_len.word);
if (new_skb)
usbnet_skb_return(dev, new_skb);
} /* while */
return 0;
}
/* ---------------------------- Transmit data path ----------------------*/
static struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev,
struct sk_buff *skb, gfp_t flags)
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
{
struct sierra_net_data *priv = sierra_net_get_private(dev);
u16 len;
bool need_tail;
BUILD_BUG_ON(FIELD_SIZEOF(struct usbnet, data)
< sizeof(struct cdc_state));
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
dev_dbg(&dev->udev->dev, "%s", __func__);
if (priv->link_up && check_ethip_packet(skb, dev) && is_ip(skb)) {
/* enough head room as is? */
if (SIERRA_NET_HIP_EXT_HDR_LEN <= skb_headroom(skb)) {
/* Save the Eth/IP length and set up HIP hdr */
len = skb->len;
skb_push(skb, SIERRA_NET_HIP_EXT_HDR_LEN);
/* Handle ZLP issue */
need_tail = ((len + SIERRA_NET_HIP_EXT_HDR_LEN)
% dev->maxpacket == 0);
if (need_tail) {
if (unlikely(skb_tailroom(skb) == 0)) {
netdev_err(dev->net, "tx_fixup:"
"no room for packet\n");
dev_kfree_skb_any(skb);
return NULL;
} else {
skb->data[skb->len] = 0;
__skb_put(skb, 1);
len = len + 1;
}
}
build_hip(skb->data, len, priv);
return skb;
} else {
/*
* compensate in the future if necessary
*/
netdev_err(dev->net, "tx_fixup: no room for HIP\n");
} /* headroom */
}
if (!priv->link_up)
dev->net->stats.tx_carrier_errors++;
/* tx_dropped incremented by usbnet */
/* filter the packet out, release it */
dev_kfree_skb_any(skb);
return NULL;
}
static const struct driver_info sierra_net_info_direct_ip = {
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
.description = "Sierra Wireless USB-to-WWAN Modem",
.flags = FLAG_WWAN | FLAG_SEND_ZLP,
.bind = sierra_net_bind,
.unbind = sierra_net_unbind,
.status = sierra_net_status,
.rx_fixup = sierra_net_rx_fixup,
.tx_fixup = sierra_net_tx_fixup,
};
#define DIRECT_IP_DEVICE(vend, prod) \
{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \
.driver_info = (unsigned long)&sierra_net_info_direct_ip}, \
{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \
.driver_info = (unsigned long)&sierra_net_info_direct_ip}, \
{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \
.driver_info = (unsigned long)&sierra_net_info_direct_ip}
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
static const struct usb_device_id products[] = {
DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
{}, /* last item */
};
MODULE_DEVICE_TABLE(usb, products);
/* We are based on usbnet, so let it handle the USB driver specifics */
static struct usb_driver sierra_net_driver = {
.name = "sierra_net",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
.no_dynamic_id = 1,
USB: Disable hub-initiated LPM for comms devices. Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-24 01:08:51 +08:00
.disable_hub_initiated_lpm = 1,
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
};
module_usb_driver(sierra_net_driver);
net/usb: add sierra_net.c driver Re-submitted based on comments from netdev community. Summary of the changes: 1. Improved error handling. 2. Added the missing timeout arguments to usb_control_msg(). The following is a new Linux driver which exposes certain models of Sierra Wireless modems to the operating system as Network Interface Cards (NICs). This driver requires a version of the sierra.c driver which supports blacklisting to work properly. The blacklist in sierra.c rejects the interfaces claimed by sierra_net.c. Likewise, the sierra_net.c driver only accepts (i.e. whitelists) the interface(s) used for USB-to-WWAN traffic. The version of sierra.c which supports blacklisting is available from the sierra wireless knowledge base page for older kernels. It is also available in Linux kernel starting from version 2.6.31. This driver works with all Sierra Wireless devices configured with PID=68A3 like USB305, USB306 provided the corresponding firmware version is I2.0 (for USB305) or M3.0 (for USB306) and later. This driver will not work with earlier firmware versions than the ones shown above. In this case the driver will issue an error message indicating incompatibility and will not serve the device's USB-to-WWAN interface. Sierra_net.c sits atop a pre-existing Linux driver called usbnet.c. A series of hook functions are provided in sierra_net.c which are called by usbnet.c in response to a particular condition such as receipt or transmission of a data packet. As such, usbnet.c does most of the work of making a modem appear to the system as a network device and for properly exchanging traffic between the USB subsystem and the Network card interface. Sierra_net.c is concerned with managing the data exchanged between the USB-to-WWAN interface and the upper layers of the operating system. Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by: Rory Filer <rfiler@sierrawireless.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 09:06:41 +08:00
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");