linux-sg2042/drivers/gpu/drm/i915/intel_ringbuffer.c

1622 lines
41 KiB
C
Raw Normal View History

/*
* Copyright © 2008-2010 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Zou Nan hai <nanhai.zou@intel.com>
* Xiang Hai hao<haihao.xiang@intel.com>
*
*/
#include "drmP.h"
#include "drm.h"
#include "i915_drv.h"
#include "i915_drm.h"
#include "i915_trace.h"
#include "intel_drv.h"
/*
* 965+ support PIPE_CONTROL commands, which provide finer grained control
* over cache flushing.
*/
struct pipe_control {
struct drm_i915_gem_object *obj;
volatile u32 *cpu_page;
u32 gtt_offset;
};
static inline int ring_space(struct intel_ring_buffer *ring)
{
int space = (ring->head & HEAD_ADDR) - (ring->tail + 8);
if (space < 0)
space += ring->size;
return space;
}
static int
gen2_render_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
u32 cmd;
int ret;
cmd = MI_FLUSH;
if (((invalidate_domains|flush_domains) & I915_GEM_DOMAIN_RENDER) == 0)
cmd |= MI_NO_WRITE_FLUSH;
if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER)
cmd |= MI_READ_FLUSH;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring, cmd);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
static int
gen4_render_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
struct drm_device *dev = ring->dev;
u32 cmd;
int ret;
/*
* read/write caches:
*
* I915_GEM_DOMAIN_RENDER is always invalidated, but is
* only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is
* also flushed at 2d versus 3d pipeline switches.
*
* read-only caches:
*
* I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if
* MI_READ_FLUSH is set, and is always flushed on 965.
*
* I915_GEM_DOMAIN_COMMAND may not exist?
*
* I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is
* invalidated when MI_EXE_FLUSH is set.
*
* I915_GEM_DOMAIN_VERTEX, which exists on 965, is
* invalidated with every MI_FLUSH.
*
* TLBs:
*
* On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND
* and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and
* I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER
* are flushed at any MI_FLUSH.
*/
cmd = MI_FLUSH | MI_NO_WRITE_FLUSH;
if ((invalidate_domains|flush_domains) & I915_GEM_DOMAIN_RENDER)
cmd &= ~MI_NO_WRITE_FLUSH;
if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION)
cmd |= MI_EXE_FLUSH;
if (invalidate_domains & I915_GEM_DOMAIN_COMMAND &&
(IS_G4X(dev) || IS_GEN5(dev)))
cmd |= MI_INVALIDATE_ISP;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring, cmd);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
/**
* Emits a PIPE_CONTROL with a non-zero post-sync operation, for
* implementing two workarounds on gen6. From section 1.4.7.1
* "PIPE_CONTROL" of the Sandy Bridge PRM volume 2 part 1:
*
* [DevSNB-C+{W/A}] Before any depth stall flush (including those
* produced by non-pipelined state commands), software needs to first
* send a PIPE_CONTROL with no bits set except Post-Sync Operation !=
* 0.
*
* [Dev-SNB{W/A}]: Before a PIPE_CONTROL with Write Cache Flush Enable
* =1, a PIPE_CONTROL with any non-zero post-sync-op is required.
*
* And the workaround for these two requires this workaround first:
*
* [Dev-SNB{W/A}]: Pipe-control with CS-stall bit set must be sent
* BEFORE the pipe-control with a post-sync op and no write-cache
* flushes.
*
* And this last workaround is tricky because of the requirements on
* that bit. From section 1.4.7.2.3 "Stall" of the Sandy Bridge PRM
* volume 2 part 1:
*
* "1 of the following must also be set:
* - Render Target Cache Flush Enable ([12] of DW1)
* - Depth Cache Flush Enable ([0] of DW1)
* - Stall at Pixel Scoreboard ([1] of DW1)
* - Depth Stall ([13] of DW1)
* - Post-Sync Operation ([13] of DW1)
* - Notify Enable ([8] of DW1)"
*
* The cache flushes require the workaround flush that triggered this
* one, so we can't use it. Depth stall would trigger the same.
* Post-sync nonzero is what triggered this second workaround, so we
* can't use that one either. Notify enable is IRQs, which aren't
* really our business. That leaves only stall at scoreboard.
*/
static int
intel_emit_post_sync_nonzero_flush(struct intel_ring_buffer *ring)
{
struct pipe_control *pc = ring->private;
u32 scratch_addr = pc->gtt_offset + 128;
int ret;
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
intel_ring_emit(ring, PIPE_CONTROL_CS_STALL |
PIPE_CONTROL_STALL_AT_SCOREBOARD);
intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
intel_ring_emit(ring, 0); /* low dword */
intel_ring_emit(ring, 0); /* high dword */
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(5));
intel_ring_emit(ring, PIPE_CONTROL_QW_WRITE);
intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT); /* address */
intel_ring_emit(ring, 0);
intel_ring_emit(ring, 0);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
static int
gen6_render_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains, u32 flush_domains)
{
u32 flags = 0;
struct pipe_control *pc = ring->private;
u32 scratch_addr = pc->gtt_offset + 128;
int ret;
/* Just flush everything. Experiments have shown that reducing the
* number of bits based on the write domains has little performance
* impact.
*/
if (flush_domains) {
flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
/*
* Ensure that any following seqno writes only happen
* when the render cache is indeed flushed.
*/
flags |= PIPE_CONTROL_CS_STALL;
}
if (invalidate_domains) {
flags |= PIPE_CONTROL_TLB_INVALIDATE;
flags |= PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_VF_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_CONST_CACHE_INVALIDATE;
flags |= PIPE_CONTROL_STATE_CACHE_INVALIDATE;
/*
* TLB invalidate requires a post-sync write.
*/
flags |= PIPE_CONTROL_QW_WRITE;
}
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4));
intel_ring_emit(ring, flags);
intel_ring_emit(ring, scratch_addr | PIPE_CONTROL_GLOBAL_GTT);
intel_ring_emit(ring, 0);
intel_ring_advance(ring);
return 0;
}
static int
gen6_render_ring_flush__wa(struct intel_ring_buffer *ring,
u32 invalidate_domains, u32 flush_domains)
{
int ret;
/* Force SNB workarounds for PIPE_CONTROL flushes */
ret = intel_emit_post_sync_nonzero_flush(ring);
if (ret)
return ret;
return gen6_render_ring_flush(ring, invalidate_domains, flush_domains);
}
static void ring_write_tail(struct intel_ring_buffer *ring,
u32 value)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
I915_WRITE_TAIL(ring, value);
}
u32 intel_ring_get_active_head(struct intel_ring_buffer *ring)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
u32 acthd_reg = INTEL_INFO(ring->dev)->gen >= 4 ?
RING_ACTHD(ring->mmio_base) : ACTHD;
return I915_READ(acthd_reg);
}
static int init_ring_common(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj = ring->obj;
int ret = 0;
u32 head;
if (HAS_FORCE_WAKE(dev))
gen6_gt_force_wake_get(dev_priv);
/* Stop the ring if it's running. */
I915_WRITE_CTL(ring, 0);
I915_WRITE_HEAD(ring, 0);
ring->write_tail(ring, 0);
head = I915_READ_HEAD(ring) & HEAD_ADDR;
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
DRM_DEBUG_KMS("%s head not reset to zero "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
I915_READ_CTL(ring),
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
if (I915_READ_HEAD(ring) & HEAD_ADDR) {
DRM_ERROR("failed to set %s head to zero "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
I915_READ_CTL(ring),
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
}
}
/* Initialize the ring. This must happen _after_ we've cleared the ring
* registers with the above sequence (the readback of the HEAD registers
* also enforces ordering), otherwise the hw might lose the new ring
* register values. */
I915_WRITE_START(ring, obj->gtt_offset);
I915_WRITE_CTL(ring,
((ring->size - PAGE_SIZE) & RING_NR_PAGES)
drm/i915: Remove use of the autoreported ringbuffer HEAD position This is a revert of 6aa56062eaba67adfb247cded244fd877329588d. This was originally introduced to workaround reads of the ringbuffer registers returning 0 on SandyBridge causing hangs due to ringbuffer overflow. The root cause here was reads through the GT powerwell require the forcewake dance, something we only learnt of later. Now it appears that reading the reported head position from the HWS is returning garbage, leading once again to hangs. For example, on q35 the autoreported head reports: [ 217.975608] head now 00010000, actual 00010000 [ 436.725613] head now 00200000, actual 00200000 [ 462.956033] head now 00210000, actual 00210010 [ 485.501409] head now 00400000, actual 00400020 [ 508.064280] head now 00410000, actual 00410000 [ 530.576078] head now 00600000, actual 00600020 [ 553.273489] head now 00610000, actual 00610018 which appears reasonably sane. In contrast, if we look at snb: [ 141.970680] head now 00e10000, actual 00008238 [ 141.974062] head now 02734000, actual 000083c8 [ 141.974425] head now 00e10000, actual 00008488 [ 141.980374] head now 032b5000, actual 000088b8 [ 141.980885] head now 03271000, actual 00008950 [ 142.040628] head now 02101000, actual 00008b40 [ 142.180173] head now 02734000, actual 00009050 [ 142.181090] head now 00000000, actual 00000ae0 [ 142.183737] head now 02734000, actual 00009050 In addition, the automatic reporting of the head position is scheduled to be defeatured in the future. It has no more utility, remove it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-08 21:34:13 +08:00
| RING_VALID);
/* If the head is still not zero, the ring is dead */
if (wait_for((I915_READ_CTL(ring) & RING_VALID) != 0 &&
I915_READ_START(ring) == obj->gtt_offset &&
(I915_READ_HEAD(ring) & HEAD_ADDR) == 0, 50)) {
DRM_ERROR("%s initialization failed "
"ctl %08x head %08x tail %08x start %08x\n",
ring->name,
I915_READ_CTL(ring),
I915_READ_HEAD(ring),
I915_READ_TAIL(ring),
I915_READ_START(ring));
ret = -EIO;
goto out;
}
if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
i915_kernel_lost_context(ring->dev);
else {
ring->head = I915_READ_HEAD(ring);
ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
ring->space = ring_space(ring);
ring->last_retired_head = -1;
}
out:
if (HAS_FORCE_WAKE(dev))
gen6_gt_force_wake_put(dev_priv);
return ret;
}
static int
init_pipe_control(struct intel_ring_buffer *ring)
{
struct pipe_control *pc;
struct drm_i915_gem_object *obj;
int ret;
if (ring->private)
return 0;
pc = kmalloc(sizeof(*pc), GFP_KERNEL);
if (!pc)
return -ENOMEM;
obj = i915_gem_alloc_object(ring->dev, 4096);
if (obj == NULL) {
DRM_ERROR("Failed to allocate seqno page\n");
ret = -ENOMEM;
goto err;
}
i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
ret = i915_gem_object_pin(obj, 4096, true, false);
if (ret)
goto err_unref;
pc->gtt_offset = obj->gtt_offset;
pc->cpu_page = kmap(obj->pages[0]);
if (pc->cpu_page == NULL)
goto err_unpin;
pc->obj = obj;
ring->private = pc;
return 0;
err_unpin:
i915_gem_object_unpin(obj);
err_unref:
drm_gem_object_unreference(&obj->base);
err:
kfree(pc);
return ret;
}
static void
cleanup_pipe_control(struct intel_ring_buffer *ring)
{
struct pipe_control *pc = ring->private;
struct drm_i915_gem_object *obj;
if (!ring->private)
return;
obj = pc->obj;
kunmap(obj->pages[0]);
i915_gem_object_unpin(obj);
drm_gem_object_unreference(&obj->base);
kfree(pc);
ring->private = NULL;
}
static int init_render_ring(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = init_ring_common(ring);
if (INTEL_INFO(dev)->gen > 3) {
I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH));
if (IS_GEN7(dev))
I915_WRITE(GFX_MODE_GEN7,
_MASKED_BIT_DISABLE(GFX_TLB_INVALIDATE_ALWAYS) |
_MASKED_BIT_ENABLE(GFX_REPLAY_MODE));
}
if (INTEL_INFO(dev)->gen >= 5) {
ret = init_pipe_control(ring);
if (ret)
return ret;
}
if (IS_GEN6(dev)) {
/* From the Sandybridge PRM, volume 1 part 3, page 24:
* "If this bit is set, STCunit will have LRA as replacement
* policy. [...] This bit must be reset. LRA replacement
* policy is not supported."
*/
I915_WRITE(CACHE_MODE_0,
_MASKED_BIT_DISABLE(CM0_STC_EVICT_DISABLE_LRA_SNB));
/* This is not explicitly set for GEN6, so read the register.
* see intel_ring_mi_set_context() for why we care.
* TODO: consider explicitly setting the bit for GEN5
*/
ring->itlb_before_ctx_switch =
!!(I915_READ(GFX_MODE) & GFX_TLB_INVALIDATE_ALWAYS);
}
if (INTEL_INFO(dev)->gen >= 6)
I915_WRITE(INSTPM, _MASKED_BIT_ENABLE(INSTPM_FORCE_ORDERING));
if (HAS_L3_GPU_CACHE(dev))
I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
return ret;
}
static void render_ring_cleanup(struct intel_ring_buffer *ring)
{
if (!ring->private)
return;
cleanup_pipe_control(ring);
}
static void
update_mboxes(struct intel_ring_buffer *ring,
u32 seqno,
u32 mmio_offset)
{
intel_ring_emit(ring, MI_SEMAPHORE_MBOX |
MI_SEMAPHORE_GLOBAL_GTT |
MI_SEMAPHORE_REGISTER |
MI_SEMAPHORE_UPDATE);
intel_ring_emit(ring, seqno);
intel_ring_emit(ring, mmio_offset);
}
/**
* gen6_add_request - Update the semaphore mailbox registers
*
* @ring - ring that is adding a request
* @seqno - return seqno stuck into the ring
*
* Update the mailbox registers in the *other* rings with the current seqno.
* This acts like a signal in the canonical semaphore.
*/
static int
gen6_add_request(struct intel_ring_buffer *ring,
u32 *seqno)
{
u32 mbox1_reg;
u32 mbox2_reg;
int ret;
ret = intel_ring_begin(ring, 10);
if (ret)
return ret;
mbox1_reg = ring->signal_mbox[0];
mbox2_reg = ring->signal_mbox[1];
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 23:32:49 +08:00
*seqno = i915_gem_next_request_seqno(ring);
update_mboxes(ring, *seqno, mbox1_reg);
update_mboxes(ring, *seqno, mbox2_reg);
intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
intel_ring_emit(ring, *seqno);
intel_ring_emit(ring, MI_USER_INTERRUPT);
intel_ring_advance(ring);
return 0;
}
/**
* intel_ring_sync - sync the waiter to the signaller on seqno
*
* @waiter - ring that is waiting
* @signaller - ring which has, or will signal
* @seqno - seqno which the waiter will block on
*/
static int
gen6_ring_sync(struct intel_ring_buffer *waiter,
struct intel_ring_buffer *signaller,
u32 seqno)
{
int ret;
u32 dw1 = MI_SEMAPHORE_MBOX |
MI_SEMAPHORE_COMPARE |
MI_SEMAPHORE_REGISTER;
/* Throughout all of the GEM code, seqno passed implies our current
* seqno is >= the last seqno executed. However for hardware the
* comparison is strictly greater than.
*/
seqno -= 1;
WARN_ON(signaller->semaphore_register[waiter->id] ==
MI_SEMAPHORE_SYNC_INVALID);
ret = intel_ring_begin(waiter, 4);
if (ret)
return ret;
intel_ring_emit(waiter,
dw1 | signaller->semaphore_register[waiter->id]);
intel_ring_emit(waiter, seqno);
intel_ring_emit(waiter, 0);
intel_ring_emit(waiter, MI_NOOP);
intel_ring_advance(waiter);
return 0;
}
#define PIPE_CONTROL_FLUSH(ring__, addr__) \
do { \
intel_ring_emit(ring__, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE | \
PIPE_CONTROL_DEPTH_STALL); \
intel_ring_emit(ring__, (addr__) | PIPE_CONTROL_GLOBAL_GTT); \
intel_ring_emit(ring__, 0); \
intel_ring_emit(ring__, 0); \
} while (0)
static int
pc_render_add_request(struct intel_ring_buffer *ring,
u32 *result)
{
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 23:32:49 +08:00
u32 seqno = i915_gem_next_request_seqno(ring);
struct pipe_control *pc = ring->private;
u32 scratch_addr = pc->gtt_offset + 128;
int ret;
/* For Ironlake, MI_USER_INTERRUPT was deprecated and apparently
* incoherent with writes to memory, i.e. completely fubar,
* so we need to use PIPE_NOTIFY instead.
*
* However, we also need to workaround the qword write
* incoherence by flushing the 6 PIPE_NOTIFY buffers out to
* memory before requesting an interrupt.
*/
ret = intel_ring_begin(ring, 32);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
PIPE_CONTROL_WRITE_FLUSH |
PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE);
intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
intel_ring_emit(ring, seqno);
intel_ring_emit(ring, 0);
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128; /* write to separate cachelines */
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128;
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128;
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128;
PIPE_CONTROL_FLUSH(ring, scratch_addr);
scratch_addr += 128;
PIPE_CONTROL_FLUSH(ring, scratch_addr);
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 19:25:36 +08:00
intel_ring_emit(ring, GFX_OP_PIPE_CONTROL(4) | PIPE_CONTROL_QW_WRITE |
PIPE_CONTROL_WRITE_FLUSH |
PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE |
PIPE_CONTROL_NOTIFY);
intel_ring_emit(ring, pc->gtt_offset | PIPE_CONTROL_GLOBAL_GTT);
intel_ring_emit(ring, seqno);
intel_ring_emit(ring, 0);
intel_ring_advance(ring);
*result = seqno;
return 0;
}
2012-12-14 23:01:25 +08:00
static u32
gen6_ring_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
2012-12-14 23:01:25 +08:00
{
/* Workaround to force correct ordering between irq and seqno writes on
* ivb (and maybe also on snb) by reading from a CS register (like
* ACTHD) before reading the status page. */
if (!lazy_coherency)
2012-12-14 23:01:25 +08:00
intel_ring_get_active_head(ring);
return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
}
static u32
ring_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
{
return intel_read_status_page(ring, I915_GEM_HWS_INDEX);
}
static u32
pc_render_get_seqno(struct intel_ring_buffer *ring, bool lazy_coherency)
{
struct pipe_control *pc = ring->private;
return pc->cpu_page[0];
}
static bool
gen5_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
if (!dev->irq_enabled)
return false;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (ring->irq_refcount++ == 0) {
dev_priv->gt_irq_mask &= ~ring->irq_enable_mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return true;
}
static void
gen5_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount == 0) {
dev_priv->gt_irq_mask |= ring->irq_enable_mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
}
static bool
i9xx_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
if (!dev->irq_enabled)
return false;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (ring->irq_refcount++ == 0) {
dev_priv->irq_mask &= ~ring->irq_enable_mask;
I915_WRITE(IMR, dev_priv->irq_mask);
POSTING_READ(IMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return true;
}
static void
i9xx_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount == 0) {
dev_priv->irq_mask |= ring->irq_enable_mask;
I915_WRITE(IMR, dev_priv->irq_mask);
POSTING_READ(IMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
}
static bool
i8xx_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
if (!dev->irq_enabled)
return false;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (ring->irq_refcount++ == 0) {
dev_priv->irq_mask &= ~ring->irq_enable_mask;
I915_WRITE16(IMR, dev_priv->irq_mask);
POSTING_READ16(IMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return true;
}
static void
i8xx_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount == 0) {
dev_priv->irq_mask |= ring->irq_enable_mask;
I915_WRITE16(IMR, dev_priv->irq_mask);
POSTING_READ16(IMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
}
void intel_ring_setup_status_page(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = ring->dev->dev_private;
u32 mmio = 0;
/* The ring status page addresses are no longer next to the rest of
* the ring registers as of gen7.
*/
if (IS_GEN7(dev)) {
switch (ring->id) {
case RCS:
mmio = RENDER_HWS_PGA_GEN7;
break;
case BCS:
mmio = BLT_HWS_PGA_GEN7;
break;
case VCS:
mmio = BSD_HWS_PGA_GEN7;
break;
}
} else if (IS_GEN6(ring->dev)) {
mmio = RING_HWS_PGA_GEN6(ring->mmio_base);
} else {
mmio = RING_HWS_PGA(ring->mmio_base);
}
I915_WRITE(mmio, (u32)ring->status_page.gfx_addr);
POSTING_READ(mmio);
}
static int
bsd_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
int ret;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring, MI_FLUSH);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
static int
i9xx_add_request(struct intel_ring_buffer *ring,
u32 *result)
{
u32 seqno;
int ret;
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
drm/i915: fixup seqno allocation logic for lazy_request Currently we reserve seqnos only when we emit the request to the ring (by bumping dev_priv->next_seqno), but start using it much earlier for ring->oustanding_lazy_request. When 2 threads compete for the gpu and run on two different rings (e.g. ddx on blitter vs. compositor) hilarity ensued, especially when we get constantly interrupted while reserving buffers. Breakage seems to have been introduced in commit 6f392d548658a17600da7faaf8a5df25ee5f01f6 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Aug 7 11:01:22 2010 +0100 drm/i915: Use a common seqno for all rings. This patch fixes up the seqno reservation logic by moving it into i915_gem_next_request_seqno. The ring->add_request functions now superflously still return the new seqno through a pointer, that will be refactored in the next patch. Note that with this change we now unconditionally allocate a seqno, even when ->add_request might fail because the rings are full and the gpu died. But this does not open up a new can of worms because we can already leave behind an outstanding_request_seqno if e.g. the caller gets interrupted with a signal while stalling for the gpu in the eviciton paths. And with the bugfix we only ever have one seqno allocated per ring (and only that ring), so there are no ordering issues with multiple outstanding seqnos on the same ring. v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it clear that we only have one seqno counter for all rings. Suggested by Chris Wilson. v3: As suggested by Chris Wilson use i915_gem_next_request_seqno instead of ring->oustanding_lazy_request to make the follow-up refactoring more clearly correct. Also improve the commit message with issues discussed on irc. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181 Tested-by: Nicolas Kalkhof nkalkhof()at()web.de Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-25 23:32:49 +08:00
seqno = i915_gem_next_request_seqno(ring);
intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
intel_ring_emit(ring, seqno);
intel_ring_emit(ring, MI_USER_INTERRUPT);
intel_ring_advance(ring);
*result = seqno;
return 0;
}
static bool
gen6_ring_get_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
if (!dev->irq_enabled)
return false;
2012-12-14 23:01:25 +08:00
/* It looks like we need to prevent the gt from suspending while waiting
* for an notifiy irq, otherwise irqs seem to get lost on at least the
* blt/bsd rings on ivb. */
gen6_gt_force_wake_get(dev_priv);
2012-12-14 23:01:25 +08:00
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (ring->irq_refcount++ == 0) {
if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
I915_WRITE_IMR(ring, ~(ring->irq_enable_mask |
GEN6_RENDER_L3_PARITY_ERROR));
else
I915_WRITE_IMR(ring, ~ring->irq_enable_mask);
dev_priv->gt_irq_mask &= ~ring->irq_enable_mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
return true;
}
static void
gen6_ring_put_irq(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
unsigned long flags;
spin_lock_irqsave(&dev_priv->irq_lock, flags);
if (--ring->irq_refcount == 0) {
if (HAS_L3_GPU_CACHE(dev) && ring->id == RCS)
I915_WRITE_IMR(ring, ~GEN6_RENDER_L3_PARITY_ERROR);
else
I915_WRITE_IMR(ring, ~0);
dev_priv->gt_irq_mask |= ring->irq_enable_mask;
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
POSTING_READ(GTIMR);
}
spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
2012-12-14 23:01:25 +08:00
gen6_gt_force_wake_put(dev_priv);
}
static int
i965_dispatch_execbuffer(struct intel_ring_buffer *ring, u32 offset, u32 length)
{
int ret;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring,
MI_BATCH_BUFFER_START |
MI_BATCH_GTT |
MI_BATCH_NON_SECURE_I965);
intel_ring_emit(ring, offset);
intel_ring_advance(ring);
return 0;
}
static int
i830_dispatch_execbuffer(struct intel_ring_buffer *ring,
u32 offset, u32 len)
{
int ret;
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
intel_ring_emit(ring, MI_BATCH_BUFFER);
intel_ring_emit(ring, offset | MI_BATCH_NON_SECURE);
intel_ring_emit(ring, offset + len - 8);
intel_ring_emit(ring, 0);
intel_ring_advance(ring);
return 0;
}
static int
i915_dispatch_execbuffer(struct intel_ring_buffer *ring,
u32 offset, u32 len)
{
int ret;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring, MI_BATCH_BUFFER_START | MI_BATCH_GTT);
intel_ring_emit(ring, offset | MI_BATCH_NON_SECURE);
intel_ring_advance(ring);
return 0;
}
static void cleanup_status_page(struct intel_ring_buffer *ring)
{
struct drm_i915_gem_object *obj;
obj = ring->status_page.obj;
if (obj == NULL)
return;
kunmap(obj->pages[0]);
i915_gem_object_unpin(obj);
drm_gem_object_unreference(&obj->base);
ring->status_page.obj = NULL;
}
static int init_status_page(struct intel_ring_buffer *ring)
{
struct drm_device *dev = ring->dev;
struct drm_i915_gem_object *obj;
int ret;
obj = i915_gem_alloc_object(dev, 4096);
if (obj == NULL) {
DRM_ERROR("Failed to allocate status page\n");
ret = -ENOMEM;
goto err;
}
i915_gem_object_set_cache_level(obj, I915_CACHE_LLC);
ret = i915_gem_object_pin(obj, 4096, true, false);
if (ret != 0) {
goto err_unref;
}
ring->status_page.gfx_addr = obj->gtt_offset;
ring->status_page.page_addr = kmap(obj->pages[0]);
if (ring->status_page.page_addr == NULL) {
ret = -ENOMEM;
goto err_unpin;
}
ring->status_page.obj = obj;
memset(ring->status_page.page_addr, 0, PAGE_SIZE);
intel_ring_setup_status_page(ring);
DRM_DEBUG_DRIVER("%s hws offset: 0x%08x\n",
ring->name, ring->status_page.gfx_addr);
return 0;
err_unpin:
i915_gem_object_unpin(obj);
err_unref:
drm_gem_object_unreference(&obj->base);
err:
return ret;
}
static int intel_init_ring_buffer(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
struct drm_i915_gem_object *obj;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ring->dev = dev;
INIT_LIST_HEAD(&ring->active_list);
INIT_LIST_HEAD(&ring->request_list);
ring->size = 32 * PAGE_SIZE;
init_waitqueue_head(&ring->irq_queue);
if (I915_NEED_GFX_HWS(dev)) {
ret = init_status_page(ring);
if (ret)
return ret;
}
obj = i915_gem_alloc_object(dev, ring->size);
if (obj == NULL) {
DRM_ERROR("Failed to allocate ringbuffer\n");
ret = -ENOMEM;
goto err_hws;
}
ring->obj = obj;
ret = i915_gem_object_pin(obj, PAGE_SIZE, true, false);
if (ret)
goto err_unref;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
goto err_unpin;
ring->virtual_start =
ioremap_wc(dev_priv->mm.gtt->gma_bus_addr + obj->gtt_offset,
ring->size);
if (ring->virtual_start == NULL) {
DRM_ERROR("Failed to map ringbuffer.\n");
ret = -EINVAL;
goto err_unpin;
}
ret = ring->init(ring);
if (ret)
goto err_unmap;
/* Workaround an erratum on the i830 which causes a hang if
* the TAIL pointer points to within the last 2 cachelines
* of the buffer.
*/
ring->effective_size = ring->size;
if (IS_I830(ring->dev) || IS_845G(ring->dev))
ring->effective_size -= 128;
return 0;
err_unmap:
iounmap(ring->virtual_start);
err_unpin:
i915_gem_object_unpin(obj);
err_unref:
drm_gem_object_unreference(&obj->base);
ring->obj = NULL;
err_hws:
cleanup_status_page(ring);
return ret;
}
void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring)
{
struct drm_i915_private *dev_priv;
int ret;
if (ring->obj == NULL)
return;
/* Disable the ring buffer. The ring must be idle at this point */
dev_priv = ring->dev->dev_private;
ret = intel_wait_ring_idle(ring);
if (ret)
DRM_ERROR("failed to quiesce %s whilst cleaning up: %d\n",
ring->name, ret);
I915_WRITE_CTL(ring, 0);
iounmap(ring->virtual_start);
i915_gem_object_unpin(ring->obj);
drm_gem_object_unreference(&ring->obj->base);
ring->obj = NULL;
if (ring->cleanup)
ring->cleanup(ring);
cleanup_status_page(ring);
}
static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring)
{
uint32_t __iomem *virt;
int rem = ring->size - ring->tail;
if (ring->space < rem) {
int ret = intel_wait_ring_buffer(ring, rem);
if (ret)
return ret;
}
virt = ring->virtual_start + ring->tail;
rem /= 4;
while (rem--)
iowrite32(MI_NOOP, virt++);
ring->tail = 0;
ring->space = ring_space(ring);
return 0;
}
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 19:25:36 +08:00
static int intel_ring_wait_seqno(struct intel_ring_buffer *ring, u32 seqno)
{
int ret;
ret = i915_wait_seqno(ring, seqno);
if (!ret)
i915_gem_retire_requests_ring(ring);
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 19:25:36 +08:00
return ret;
}
static int intel_ring_wait_request(struct intel_ring_buffer *ring, int n)
{
struct drm_i915_gem_request *request;
u32 seqno = 0;
int ret;
i915_gem_retire_requests_ring(ring);
if (ring->last_retired_head != -1) {
ring->head = ring->last_retired_head;
ring->last_retired_head = -1;
ring->space = ring_space(ring);
if (ring->space >= n)
return 0;
}
list_for_each_entry(request, &ring->request_list, list) {
int space;
if (request->tail == -1)
continue;
space = request->tail - (ring->tail + 8);
if (space < 0)
space += ring->size;
if (space >= n) {
seqno = request->seqno;
break;
}
/* Consume this request in case we need more space than
* is available and so need to prevent a race between
* updating last_retired_head and direct reads of
* I915_RING_HEAD. It also provides a nice sanity check.
*/
request->tail = -1;
}
if (seqno == 0)
return -ENOSPC;
ret = intel_ring_wait_seqno(ring, seqno);
if (ret)
return ret;
if (WARN_ON(ring->last_retired_head == -1))
return -ENOSPC;
ring->head = ring->last_retired_head;
ring->last_retired_head = -1;
ring->space = ring_space(ring);
if (WARN_ON(ring->space < n))
return -ENOSPC;
return 0;
}
int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
{
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 19:25:36 +08:00
int ret;
drm/i915: Record the tail at each request and use it to estimate the head By recording the location of every request in the ringbuffer, we know that in order to retire the request the GPU must have finished reading it and so the GPU head is now beyond the tail of the request. We can therefore provide a conservative estimate of where the GPU is reading from in order to avoid having to read back the ring buffer registers when polling for space upon starting a new write into the ringbuffer. A secondary effect is that this allows us to convert intel_ring_buffer_wait() to use i915_wait_request() and so consolidate upon the single function to handle the complicated task of waiting upon the GPU. A necessary precaution is that we need to make that wait uninterruptible to match the existing conditions as all the callers of intel_ring_begin() have not been audited to handle ERESTARTSYS correctly. By using a conservative estimate for the head, and always processing all outstanding requests first, we prevent a race condition between using the estimate and direct reads of I915_RING_HEAD which could result in the value of the head going backwards, and the tail overflowing once again. We are also careful to mark any request that we skip over in order to free space in ring as consumed which provides a self-consistency check. Given sufficient abuse, such as a set of unthrottled GPU bound cairo-traces, avoiding the use of I915_RING_HEAD gives a 10-20% boost on Sandy Bridge (i5-2520m): firefox-paintball 18927ms -> 15646ms: 1.21x speedup firefox-fishtank 12563ms -> 11278ms: 1.11x speedup which is a mild consolation for the performance those traces achieved from exploiting the buggy autoreported head. v2: Add a few more comments and make request->tail a conservative estimate as suggested by Daniel Vetter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: resolve conflicts with retirement defering and the lack of the autoreport head removal (that will go in through -fixes).] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-15 19:25:36 +08:00
ret = intel_ring_wait_request(ring, n);
if (ret != -ENOSPC)
return ret;
trace_i915_ring_wait_begin(ring);
/* With GEM the hangcheck timer should kick us out of the loop,
* leaving it early runs the risk of corrupting GEM state (due
* to running on almost untested codepaths). But on resume
* timers don't work yet, so prevent a complete hang in that
* case by choosing an insanely large timeout. */
end = jiffies + 60 * HZ;
do {
ring->head = I915_READ_HEAD(ring);
ring->space = ring_space(ring);
if (ring->space >= n) {
trace_i915_ring_wait_end(ring);
return 0;
}
if (dev->primary->master) {
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
}
msleep(1);
drm/i915: non-interruptible sleeps can't handle -EAGAIN So don't return -EAGAIN, even in the case of a gpu hang. Remap it to -EIO instead. Note that this isn't really an issue with interruptability, but more that we have quite a few codepaths (mostly around kms stuff) that simply can't handle any errors and hence not even -EAGAIN. Instead of adding proper failure paths so that we could restart these ioctls we've opted for the cheap way out of sleeping non-interruptibly. Which works everywhere but when the gpu dies, which this patch fixes. So essentially interruptible == false means 'wait for the gpu or die trying'.' This patch is a bit ugly because intel_ring_begin is all non-interruptible and hence only returns -EIO. But as the comment in there says, auditing all the callsites would be a pain. To avoid duplicating code, reuse i915_gem_check_wedge in __wait_seqno and intel_wait_ring_buffer. Also use the opportunity to clarify the different cases in i915_gem_check_wedge a bit with comments. v2: Don't access dev_priv->mm.interruptible from check_wedge - we might not hold dev->struct_mutex, making this racy. Instead pass interruptible in as a parameter. I've noticed this because I've hit a BUG_ON(!mutex_is_locked) at the top of check_wedge. This has been added in commit b4aca0106c466b5a0329318203f65bac2d91b682 Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Apr 25 20:50:12 2012 -0700 drm/i915: extract some common olr+wedge code although that commit is missing any justification for this. I guess it's just copy&paste, because the same commit add the same BUG_ON check to check_olr, where it indeed makes sense. But in check_wedge everything we access is protected by other means, so this is superflous. And because it now gets in the way (we add a new caller in __wait_seqno, which can be called without dev->struct_mutext) let's just remove it. v3: Group all the i915_gem_check_wedge refactoring into this patch, so that this patch here is all about not returning -EAGAIN to callsites that can't handle syscall restarting. v4: Add clarification what interuptible == fales means in our code, requested by Ben Widawsky. v5: Fix EAGAIN mispell noticed by Chris Wilson. Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-05 04:54:13 +08:00
ret = i915_gem_check_wedge(dev_priv, dev_priv->mm.interruptible);
if (ret)
return ret;
} while (!time_after(jiffies, end));
trace_i915_ring_wait_end(ring);
return -EBUSY;
}
int intel_ring_begin(struct intel_ring_buffer *ring,
int num_dwords)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
int n = 4*num_dwords;
int ret;
ret = i915_gem_check_wedge(dev_priv, dev_priv->mm.interruptible);
if (ret)
return ret;
if (unlikely(ring->tail + n > ring->effective_size)) {
ret = intel_wrap_ring_buffer(ring);
if (unlikely(ret))
return ret;
}
if (unlikely(ring->space < n)) {
ret = intel_wait_ring_buffer(ring, n);
if (unlikely(ret))
return ret;
}
ring->space -= n;
return 0;
}
void intel_ring_advance(struct intel_ring_buffer *ring)
{
2012-05-03 20:48:16 +08:00
struct drm_i915_private *dev_priv = ring->dev->dev_private;
ring->tail &= ring->size - 1;
2012-05-03 20:48:16 +08:00
if (dev_priv->stop_rings & intel_ring_flag(ring))
return;
ring->write_tail(ring, ring->tail);
}
static void gen6_bsd_ring_write_tail(struct intel_ring_buffer *ring,
u32 value)
{
drm_i915_private_t *dev_priv = ring->dev->dev_private;
/* Every tail move must follow the sequence below */
/* Disable notification that the ring is IDLE. The GT
* will then assume that it is busy and bring it out of rc6.
*/
I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
_MASKED_BIT_ENABLE(GEN6_BSD_SLEEP_MSG_DISABLE));
/* Clear the context id. Here be magic! */
I915_WRITE64(GEN6_BSD_RNCID, 0x0);
/* Wait for the ring not to be idle, i.e. for it to wake up. */
if (wait_for((I915_READ(GEN6_BSD_SLEEP_PSMI_CONTROL) &
GEN6_BSD_SLEEP_INDICATOR) == 0,
50))
DRM_ERROR("timed out waiting for the BSD ring to wake up\n");
/* Now that the ring is fully powered up, update the tail */
I915_WRITE_TAIL(ring, value);
POSTING_READ(RING_TAIL(ring->mmio_base));
/* Let the ring send IDLE messages to the GT again,
* and so let it sleep to conserve power when idle.
*/
I915_WRITE(GEN6_BSD_SLEEP_PSMI_CONTROL,
_MASKED_BIT_DISABLE(GEN6_BSD_SLEEP_MSG_DISABLE));
}
static int gen6_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate, u32 flush)
{
uint32_t cmd;
int ret;
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
cmd = MI_FLUSH_DW;
if (invalidate & I915_GEM_GPU_DOMAINS)
cmd |= MI_INVALIDATE_TLB | MI_INVALIDATE_BSD;
intel_ring_emit(ring, cmd);
intel_ring_emit(ring, 0);
intel_ring_emit(ring, 0);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
static int
gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
u32 offset, u32 len)
{
int ret;
ret = intel_ring_begin(ring, 2);
if (ret)
return ret;
intel_ring_emit(ring, MI_BATCH_BUFFER_START | MI_BATCH_NON_SECURE_I965);
/* bit0-7 is the length on GEN6+ */
intel_ring_emit(ring, offset);
intel_ring_advance(ring);
return 0;
}
/* Blitter support (SandyBridge+) */
static int blt_ring_flush(struct intel_ring_buffer *ring,
u32 invalidate, u32 flush)
{
uint32_t cmd;
int ret;
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
cmd = MI_FLUSH_DW;
if (invalidate & I915_GEM_DOMAIN_RENDER)
cmd |= MI_INVALIDATE_TLB;
intel_ring_emit(ring, cmd);
intel_ring_emit(ring, 0);
intel_ring_emit(ring, 0);
intel_ring_emit(ring, MI_NOOP);
intel_ring_advance(ring);
return 0;
}
int intel_init_render_ring_buffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
ring->name = "render ring";
ring->id = RCS;
ring->mmio_base = RENDER_RING_BASE;
if (INTEL_INFO(dev)->gen >= 6) {
ring->add_request = gen6_add_request;
ring->flush = gen6_render_ring_flush;
if (INTEL_INFO(dev)->gen == 6)
ring->flush = gen6_render_ring_flush__wa;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->irq_enable_mask = GT_USER_INTERRUPT;
2012-12-14 23:01:25 +08:00
ring->get_seqno = gen6_ring_get_seqno;
ring->sync_to = gen6_ring_sync;
ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_RV;
ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_RB;
ring->signal_mbox[0] = GEN6_VRSYNC;
ring->signal_mbox[1] = GEN6_BRSYNC;
} else if (IS_GEN5(dev)) {
ring->add_request = pc_render_add_request;
ring->flush = gen4_render_ring_flush;
ring->get_seqno = pc_render_get_seqno;
ring->irq_get = gen5_ring_get_irq;
ring->irq_put = gen5_ring_put_irq;
ring->irq_enable_mask = GT_USER_INTERRUPT | GT_PIPE_NOTIFY;
} else {
ring->add_request = i9xx_add_request;
if (INTEL_INFO(dev)->gen < 4)
ring->flush = gen2_render_ring_flush;
else
ring->flush = gen4_render_ring_flush;
ring->get_seqno = ring_get_seqno;
if (IS_GEN2(dev)) {
ring->irq_get = i8xx_ring_get_irq;
ring->irq_put = i8xx_ring_put_irq;
} else {
ring->irq_get = i9xx_ring_get_irq;
ring->irq_put = i9xx_ring_put_irq;
}
ring->irq_enable_mask = I915_USER_INTERRUPT;
}
ring->write_tail = ring_write_tail;
if (INTEL_INFO(dev)->gen >= 6)
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
else if (INTEL_INFO(dev)->gen >= 4)
ring->dispatch_execbuffer = i965_dispatch_execbuffer;
else if (IS_I830(dev) || IS_845G(dev))
ring->dispatch_execbuffer = i830_dispatch_execbuffer;
else
ring->dispatch_execbuffer = i915_dispatch_execbuffer;
ring->init = init_render_ring;
ring->cleanup = render_ring_cleanup;
if (!I915_NEED_GFX_HWS(dev)) {
ring->status_page.page_addr = dev_priv->status_page_dmah->vaddr;
memset(ring->status_page.page_addr, 0, PAGE_SIZE);
}
return intel_init_ring_buffer(dev, ring);
}
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
ring->name = "render ring";
ring->id = RCS;
ring->mmio_base = RENDER_RING_BASE;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
if (INTEL_INFO(dev)->gen >= 6) {
/* non-kms not supported on gen6+ */
return -ENODEV;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
}
/* Note: gem is not supported on gen5/ilk without kms (the corresponding
* gem_init ioctl returns with -ENODEV). Hence we do not need to set up
* the special gen5 functions. */
ring->add_request = i9xx_add_request;
if (INTEL_INFO(dev)->gen < 4)
ring->flush = gen2_render_ring_flush;
else
ring->flush = gen4_render_ring_flush;
ring->get_seqno = ring_get_seqno;
if (IS_GEN2(dev)) {
ring->irq_get = i8xx_ring_get_irq;
ring->irq_put = i8xx_ring_put_irq;
} else {
ring->irq_get = i9xx_ring_get_irq;
ring->irq_put = i9xx_ring_put_irq;
}
ring->irq_enable_mask = I915_USER_INTERRUPT;
ring->write_tail = ring_write_tail;
if (INTEL_INFO(dev)->gen >= 4)
ring->dispatch_execbuffer = i965_dispatch_execbuffer;
else if (IS_I830(dev) || IS_845G(dev))
ring->dispatch_execbuffer = i830_dispatch_execbuffer;
else
ring->dispatch_execbuffer = i915_dispatch_execbuffer;
ring->init = init_render_ring;
ring->cleanup = render_ring_cleanup;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
if (!I915_NEED_GFX_HWS(dev))
ring->status_page.page_addr = dev_priv->status_page_dmah->vaddr;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
ring->dev = dev;
INIT_LIST_HEAD(&ring->active_list);
INIT_LIST_HEAD(&ring->request_list);
ring->size = size;
ring->effective_size = ring->size;
if (IS_I830(ring->dev))
ring->effective_size -= 128;
ring->virtual_start = ioremap_wc(start, size);
if (ring->virtual_start == NULL) {
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 17:57:11 +08:00
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
return 0;
}
int intel_init_bsd_ring_buffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = &dev_priv->ring[VCS];
ring->name = "bsd ring";
ring->id = VCS;
ring->write_tail = ring_write_tail;
if (IS_GEN6(dev) || IS_GEN7(dev)) {
ring->mmio_base = GEN6_BSD_RING_BASE;
/* gen6 bsd needs a special wa for tail updates */
if (IS_GEN6(dev))
ring->write_tail = gen6_bsd_ring_write_tail;
ring->flush = gen6_ring_flush;
ring->add_request = gen6_add_request;
ring->get_seqno = gen6_ring_get_seqno;
ring->irq_enable_mask = GEN6_BSD_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
ring->sync_to = gen6_ring_sync;
ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_VR;
ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_INVALID;
ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_VB;
ring->signal_mbox[0] = GEN6_RVSYNC;
ring->signal_mbox[1] = GEN6_BVSYNC;
} else {
ring->mmio_base = BSD_RING_BASE;
ring->flush = bsd_ring_flush;
ring->add_request = i9xx_add_request;
ring->get_seqno = ring_get_seqno;
if (IS_GEN5(dev)) {
ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
ring->irq_get = gen5_ring_get_irq;
ring->irq_put = gen5_ring_put_irq;
} else {
ring->irq_enable_mask = I915_BSD_USER_INTERRUPT;
ring->irq_get = i9xx_ring_get_irq;
ring->irq_put = i9xx_ring_put_irq;
}
ring->dispatch_execbuffer = i965_dispatch_execbuffer;
}
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
}
int intel_init_blt_ring_buffer(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
ring->name = "blitter ring";
ring->id = BCS;
ring->mmio_base = BLT_RING_BASE;
ring->write_tail = ring_write_tail;
ring->flush = blt_ring_flush;
ring->add_request = gen6_add_request;
ring->get_seqno = gen6_ring_get_seqno;
ring->irq_enable_mask = GEN6_BLITTER_USER_INTERRUPT;
ring->irq_get = gen6_ring_get_irq;
ring->irq_put = gen6_ring_put_irq;
ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
ring->sync_to = gen6_ring_sync;
ring->semaphore_register[0] = MI_SEMAPHORE_SYNC_BR;
ring->semaphore_register[1] = MI_SEMAPHORE_SYNC_BV;
ring->semaphore_register[2] = MI_SEMAPHORE_SYNC_INVALID;
ring->signal_mbox[0] = GEN6_RBSYNC;
ring->signal_mbox[1] = GEN6_VBSYNC;
ring->init = init_ring_common;
return intel_init_ring_buffer(dev, ring);
}
int
intel_ring_flush_all_caches(struct intel_ring_buffer *ring)
{
int ret;
if (!ring->gpu_caches_dirty)
return 0;
ret = ring->flush(ring, 0, I915_GEM_GPU_DOMAINS);
if (ret)
return ret;
trace_i915_gem_ring_flush(ring, 0, I915_GEM_GPU_DOMAINS);
ring->gpu_caches_dirty = false;
return 0;
}
int
intel_ring_invalidate_all_caches(struct intel_ring_buffer *ring)
{
uint32_t flush_domains;
int ret;
flush_domains = 0;
if (ring->gpu_caches_dirty)
flush_domains = I915_GEM_GPU_DOMAINS;
ret = ring->flush(ring, I915_GEM_GPU_DOMAINS, flush_domains);
if (ret)
return ret;
trace_i915_gem_ring_flush(ring, I915_GEM_GPU_DOMAINS, flush_domains);
ring->gpu_caches_dirty = false;
return 0;
}