linux-sg2042/include/video/display_timing.h

107 lines
3.1 KiB
C
Raw Normal View History

video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
/*
* Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
*
* description of display timings
*
* This file is released under the GPLv2
*/
#ifndef __LINUX_DISPLAY_TIMING_H
#define __LINUX_DISPLAY_TIMING_H
#include <linux/bitops.h>
#include <linux/types.h>
enum display_flags {
DISPLAY_FLAGS_HSYNC_LOW = BIT(0),
DISPLAY_FLAGS_HSYNC_HIGH = BIT(1),
DISPLAY_FLAGS_VSYNC_LOW = BIT(2),
DISPLAY_FLAGS_VSYNC_HIGH = BIT(3),
/* data enable flag */
DISPLAY_FLAGS_DE_LOW = BIT(4),
DISPLAY_FLAGS_DE_HIGH = BIT(5),
/* drive data on pos. edge */
DISPLAY_FLAGS_PIXDATA_POSEDGE = BIT(6),
/* drive data on neg. edge */
DISPLAY_FLAGS_PIXDATA_NEGEDGE = BIT(7),
DISPLAY_FLAGS_INTERLACED = BIT(8),
DISPLAY_FLAGS_DOUBLESCAN = BIT(9),
DISPLAY_FLAGS_DOUBLECLK = BIT(10),
/* drive sync on pos. edge */
DISPLAY_FLAGS_SYNC_POSEDGE = BIT(11),
/* drive sync on neg. edge */
DISPLAY_FLAGS_SYNC_NEGEDGE = BIT(12),
};
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
/*
* A single signal can be specified via a range of minimal and maximal values
* with a typical value, that lies somewhere inbetween.
*/
struct timing_entry {
u32 min;
u32 typ;
u32 max;
};
/*
* Single "mode" entry. This describes one set of signal timings a display can
* have in one setting. This struct can later be converted to struct videomode
* (see include/video/videomode.h). As each timing_entry can be defined as a
* range, one struct display_timing may become multiple struct videomodes.
*
* Example: hsync active high, vsync active low
*
* Active Video
* Video ______________________XXXXXXXXXXXXXXXXXXXXXX_____________________
* |<- sync ->|<- back ->|<----- active ----->|<- front ->|<- sync..
* | | porch | | porch |
*
* HSync _|¯¯¯¯¯¯¯¯¯¯|___________________________________________|¯¯¯¯¯¯¯¯¯
*
* VSync ¯|__________|¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯|_________
*/
struct display_timing {
struct timing_entry pixelclock;
struct timing_entry hactive; /* hor. active video */
struct timing_entry hfront_porch; /* hor. front porch */
struct timing_entry hback_porch; /* hor. back porch */
struct timing_entry hsync_len; /* hor. sync len */
struct timing_entry vactive; /* ver. active video */
struct timing_entry vfront_porch; /* ver. front porch */
struct timing_entry vback_porch; /* ver. back porch */
struct timing_entry vsync_len; /* ver. sync len */
enum display_flags flags; /* display flags */
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
};
/*
* This describes all timing settings a display provides.
* The native_mode is the default setting for this display.
* Drivers that can handle multiple videomodes should work with this struct and
* convert each entry to the desired end result.
*/
struct display_timings {
unsigned int num_timings;
unsigned int native_mode;
struct display_timing **timings;
};
/* get one entry from struct display_timings */
static inline struct display_timing *display_timings_get(const struct
display_timings *disp,
unsigned int index)
{
if (disp->num_timings > index)
return disp->timings[index];
else
return NULL;
}
void display_timings_release(struct display_timings *disp);
#endif