linux-sg2042/drivers/crypto/atmel-sha.c

1602 lines
38 KiB
C
Raw Normal View History

/*
* Cryptographic API.
*
* Support for ATMEL SHA1/SHA256 HW acceleration.
*
* Copyright (c) 2012 Eukréa Electromatique - ATMEL
* Author: Nicolas Royer <nicolas@eukrea.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Some ideas are from omap-sham.c drivers.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/hw_random.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/crypto.h>
#include <linux/cryptohash.h>
#include <crypto/scatterwalk.h>
#include <crypto/algapi.h>
#include <crypto/sha.h>
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
#include <linux/platform_data/crypto-atmel.h>
#include "atmel-sha-regs.h"
/* SHA flags */
#define SHA_FLAGS_BUSY BIT(0)
#define SHA_FLAGS_FINAL BIT(1)
#define SHA_FLAGS_DMA_ACTIVE BIT(2)
#define SHA_FLAGS_OUTPUT_READY BIT(3)
#define SHA_FLAGS_INIT BIT(4)
#define SHA_FLAGS_CPU BIT(5)
#define SHA_FLAGS_DMA_READY BIT(6)
#define SHA_FLAGS_FINUP BIT(16)
#define SHA_FLAGS_SG BIT(17)
#define SHA_FLAGS_ALGO_MASK GENMASK(22, 18)
#define SHA_FLAGS_SHA1 BIT(18)
#define SHA_FLAGS_SHA224 BIT(19)
#define SHA_FLAGS_SHA256 BIT(20)
#define SHA_FLAGS_SHA384 BIT(21)
#define SHA_FLAGS_SHA512 BIT(22)
#define SHA_FLAGS_ERROR BIT(23)
#define SHA_FLAGS_PAD BIT(24)
#define SHA_FLAGS_RESTORE BIT(25)
#define SHA_OP_UPDATE 1
#define SHA_OP_FINAL 2
#define SHA_BUFFER_LEN (PAGE_SIZE / 16)
#define ATMEL_SHA_DMA_THRESHOLD 56
struct atmel_sha_caps {
bool has_dma;
bool has_dualbuff;
bool has_sha224;
bool has_sha_384_512;
bool has_uihv;
};
struct atmel_sha_dev;
/*
* .statesize = sizeof(struct atmel_sha_reqctx) must be <= PAGE_SIZE / 8 as
* tested by the ahash_prepare_alg() function.
*/
struct atmel_sha_reqctx {
struct atmel_sha_dev *dd;
unsigned long flags;
unsigned long op;
u8 digest[SHA512_DIGEST_SIZE] __aligned(sizeof(u32));
u64 digcnt[2];
size_t bufcnt;
size_t buflen;
dma_addr_t dma_addr;
/* walk state */
struct scatterlist *sg;
unsigned int offset; /* offset in current sg */
unsigned int total; /* total request */
size_t block_size;
u8 buffer[SHA_BUFFER_LEN + SHA512_BLOCK_SIZE] __aligned(sizeof(u32));
};
struct atmel_sha_ctx {
struct atmel_sha_dev *dd;
unsigned long flags;
};
#define ATMEL_SHA_QUEUE_LENGTH 50
struct atmel_sha_dma {
struct dma_chan *chan;
struct dma_slave_config dma_conf;
};
struct atmel_sha_dev {
struct list_head list;
unsigned long phys_base;
struct device *dev;
struct clk *iclk;
int irq;
void __iomem *io_base;
spinlock_t lock;
int err;
struct tasklet_struct done_task;
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
struct tasklet_struct queue_task;
unsigned long flags;
struct crypto_queue queue;
struct ahash_request *req;
struct atmel_sha_dma dma_lch_in;
struct atmel_sha_caps caps;
u32 hw_version;
};
struct atmel_sha_drv {
struct list_head dev_list;
spinlock_t lock;
};
static struct atmel_sha_drv atmel_sha = {
.dev_list = LIST_HEAD_INIT(atmel_sha.dev_list),
.lock = __SPIN_LOCK_UNLOCKED(atmel_sha.lock),
};
static inline u32 atmel_sha_read(struct atmel_sha_dev *dd, u32 offset)
{
return readl_relaxed(dd->io_base + offset);
}
static inline void atmel_sha_write(struct atmel_sha_dev *dd,
u32 offset, u32 value)
{
writel_relaxed(value, dd->io_base + offset);
}
static size_t atmel_sha_append_sg(struct atmel_sha_reqctx *ctx)
{
size_t count;
while ((ctx->bufcnt < ctx->buflen) && ctx->total) {
count = min(ctx->sg->length - ctx->offset, ctx->total);
count = min(count, ctx->buflen - ctx->bufcnt);
if (count <= 0) {
/*
* Check if count <= 0 because the buffer is full or
* because the sg length is 0. In the latest case,
* check if there is another sg in the list, a 0 length
* sg doesn't necessarily mean the end of the sg list.
*/
if ((ctx->sg->length == 0) && !sg_is_last(ctx->sg)) {
ctx->sg = sg_next(ctx->sg);
continue;
} else {
break;
}
}
scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, ctx->sg,
ctx->offset, count, 0);
ctx->bufcnt += count;
ctx->offset += count;
ctx->total -= count;
if (ctx->offset == ctx->sg->length) {
ctx->sg = sg_next(ctx->sg);
if (ctx->sg)
ctx->offset = 0;
else
ctx->total = 0;
}
}
return 0;
}
/*
* The purpose of this padding is to ensure that the padded message is a
* multiple of 512 bits (SHA1/SHA224/SHA256) or 1024 bits (SHA384/SHA512).
* The bit "1" is appended at the end of the message followed by
* "padlen-1" zero bits. Then a 64 bits block (SHA1/SHA224/SHA256) or
* 128 bits block (SHA384/SHA512) equals to the message length in bits
* is appended.
*
* For SHA1/SHA224/SHA256, padlen is calculated as followed:
* - if message length < 56 bytes then padlen = 56 - message length
* - else padlen = 64 + 56 - message length
*
* For SHA384/SHA512, padlen is calculated as followed:
* - if message length < 112 bytes then padlen = 112 - message length
* - else padlen = 128 + 112 - message length
*/
static void atmel_sha_fill_padding(struct atmel_sha_reqctx *ctx, int length)
{
unsigned int index, padlen;
u64 bits[2];
u64 size[2];
size[0] = ctx->digcnt[0];
size[1] = ctx->digcnt[1];
size[0] += ctx->bufcnt;
if (size[0] < ctx->bufcnt)
size[1]++;
size[0] += length;
if (size[0] < length)
size[1]++;
bits[1] = cpu_to_be64(size[0] << 3);
bits[0] = cpu_to_be64(size[1] << 3 | size[0] >> 61);
if (ctx->flags & (SHA_FLAGS_SHA384 | SHA_FLAGS_SHA512)) {
index = ctx->bufcnt & 0x7f;
padlen = (index < 112) ? (112 - index) : ((128+112) - index);
*(ctx->buffer + ctx->bufcnt) = 0x80;
memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen-1);
memcpy(ctx->buffer + ctx->bufcnt + padlen, bits, 16);
ctx->bufcnt += padlen + 16;
ctx->flags |= SHA_FLAGS_PAD;
} else {
index = ctx->bufcnt & 0x3f;
padlen = (index < 56) ? (56 - index) : ((64+56) - index);
*(ctx->buffer + ctx->bufcnt) = 0x80;
memset(ctx->buffer + ctx->bufcnt + 1, 0, padlen-1);
memcpy(ctx->buffer + ctx->bufcnt + padlen, &bits[1], 8);
ctx->bufcnt += padlen + 8;
ctx->flags |= SHA_FLAGS_PAD;
}
}
static struct atmel_sha_dev *atmel_sha_find_dev(struct atmel_sha_ctx *tctx)
{
struct atmel_sha_dev *dd = NULL;
struct atmel_sha_dev *tmp;
spin_lock_bh(&atmel_sha.lock);
if (!tctx->dd) {
list_for_each_entry(tmp, &atmel_sha.dev_list, list) {
dd = tmp;
break;
}
tctx->dd = dd;
} else {
dd = tctx->dd;
}
spin_unlock_bh(&atmel_sha.lock);
return dd;
}
static int atmel_sha_init(struct ahash_request *req)
{
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
struct atmel_sha_ctx *tctx = crypto_ahash_ctx(tfm);
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
struct atmel_sha_dev *dd = atmel_sha_find_dev(tctx);
ctx->dd = dd;
ctx->flags = 0;
dev_dbg(dd->dev, "init: digest size: %d\n",
crypto_ahash_digestsize(tfm));
switch (crypto_ahash_digestsize(tfm)) {
case SHA1_DIGEST_SIZE:
ctx->flags |= SHA_FLAGS_SHA1;
ctx->block_size = SHA1_BLOCK_SIZE;
break;
case SHA224_DIGEST_SIZE:
ctx->flags |= SHA_FLAGS_SHA224;
ctx->block_size = SHA224_BLOCK_SIZE;
break;
case SHA256_DIGEST_SIZE:
ctx->flags |= SHA_FLAGS_SHA256;
ctx->block_size = SHA256_BLOCK_SIZE;
break;
case SHA384_DIGEST_SIZE:
ctx->flags |= SHA_FLAGS_SHA384;
ctx->block_size = SHA384_BLOCK_SIZE;
break;
case SHA512_DIGEST_SIZE:
ctx->flags |= SHA_FLAGS_SHA512;
ctx->block_size = SHA512_BLOCK_SIZE;
break;
default:
return -EINVAL;
break;
}
ctx->bufcnt = 0;
ctx->digcnt[0] = 0;
ctx->digcnt[1] = 0;
ctx->buflen = SHA_BUFFER_LEN;
return 0;
}
static void atmel_sha_write_ctrl(struct atmel_sha_dev *dd, int dma)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
u32 valmr = SHA_MR_MODE_AUTO;
unsigned int i, hashsize = 0;
if (likely(dma)) {
if (!dd->caps.has_dma)
atmel_sha_write(dd, SHA_IER, SHA_INT_TXBUFE);
valmr = SHA_MR_MODE_PDC;
if (dd->caps.has_dualbuff)
valmr |= SHA_MR_DUALBUFF;
} else {
atmel_sha_write(dd, SHA_IER, SHA_INT_DATARDY);
}
switch (ctx->flags & SHA_FLAGS_ALGO_MASK) {
case SHA_FLAGS_SHA1:
valmr |= SHA_MR_ALGO_SHA1;
hashsize = SHA1_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA224:
valmr |= SHA_MR_ALGO_SHA224;
hashsize = SHA256_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA256:
valmr |= SHA_MR_ALGO_SHA256;
hashsize = SHA256_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA384:
valmr |= SHA_MR_ALGO_SHA384;
hashsize = SHA512_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA512:
valmr |= SHA_MR_ALGO_SHA512;
hashsize = SHA512_DIGEST_SIZE;
break;
default:
break;
}
/* Setting CR_FIRST only for the first iteration */
if (!(ctx->digcnt[0] || ctx->digcnt[1])) {
atmel_sha_write(dd, SHA_CR, SHA_CR_FIRST);
} else if (dd->caps.has_uihv && (ctx->flags & SHA_FLAGS_RESTORE)) {
const u32 *hash = (const u32 *)ctx->digest;
/*
* Restore the hardware context: update the User Initialize
* Hash Value (UIHV) with the value saved when the latest
* 'update' operation completed on this very same crypto
* request.
*/
ctx->flags &= ~SHA_FLAGS_RESTORE;
atmel_sha_write(dd, SHA_CR, SHA_CR_WUIHV);
for (i = 0; i < hashsize / sizeof(u32); ++i)
atmel_sha_write(dd, SHA_REG_DIN(i), hash[i]);
atmel_sha_write(dd, SHA_CR, SHA_CR_FIRST);
valmr |= SHA_MR_UIHV;
}
/*
* WARNING: If the UIHV feature is not available, the hardware CANNOT
* process concurrent requests: the internal registers used to store
* the hash/digest are still set to the partial digest output values
* computed during the latest round.
*/
atmel_sha_write(dd, SHA_MR, valmr);
}
static int atmel_sha_xmit_cpu(struct atmel_sha_dev *dd, const u8 *buf,
size_t length, int final)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
int count, len32;
const u32 *buffer = (const u32 *)buf;
dev_dbg(dd->dev, "xmit_cpu: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n",
ctx->digcnt[1], ctx->digcnt[0], length, final);
atmel_sha_write_ctrl(dd, 0);
/* should be non-zero before next lines to disable clocks later */
ctx->digcnt[0] += length;
if (ctx->digcnt[0] < length)
ctx->digcnt[1]++;
if (final)
dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */
len32 = DIV_ROUND_UP(length, sizeof(u32));
dd->flags |= SHA_FLAGS_CPU;
for (count = 0; count < len32; count++)
atmel_sha_write(dd, SHA_REG_DIN(count), buffer[count]);
return -EINPROGRESS;
}
static int atmel_sha_xmit_pdc(struct atmel_sha_dev *dd, dma_addr_t dma_addr1,
size_t length1, dma_addr_t dma_addr2, size_t length2, int final)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
int len32;
dev_dbg(dd->dev, "xmit_pdc: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n",
ctx->digcnt[1], ctx->digcnt[0], length1, final);
len32 = DIV_ROUND_UP(length1, sizeof(u32));
atmel_sha_write(dd, SHA_PTCR, SHA_PTCR_TXTDIS);
atmel_sha_write(dd, SHA_TPR, dma_addr1);
atmel_sha_write(dd, SHA_TCR, len32);
len32 = DIV_ROUND_UP(length2, sizeof(u32));
atmel_sha_write(dd, SHA_TNPR, dma_addr2);
atmel_sha_write(dd, SHA_TNCR, len32);
atmel_sha_write_ctrl(dd, 1);
/* should be non-zero before next lines to disable clocks later */
ctx->digcnt[0] += length1;
if (ctx->digcnt[0] < length1)
ctx->digcnt[1]++;
if (final)
dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */
dd->flags |= SHA_FLAGS_DMA_ACTIVE;
/* Start DMA transfer */
atmel_sha_write(dd, SHA_PTCR, SHA_PTCR_TXTEN);
return -EINPROGRESS;
}
static void atmel_sha_dma_callback(void *data)
{
struct atmel_sha_dev *dd = data;
/* dma_lch_in - completed - wait DATRDY */
atmel_sha_write(dd, SHA_IER, SHA_INT_DATARDY);
}
static int atmel_sha_xmit_dma(struct atmel_sha_dev *dd, dma_addr_t dma_addr1,
size_t length1, dma_addr_t dma_addr2, size_t length2, int final)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
struct dma_async_tx_descriptor *in_desc;
struct scatterlist sg[2];
dev_dbg(dd->dev, "xmit_dma: digcnt: 0x%llx 0x%llx, length: %d, final: %d\n",
ctx->digcnt[1], ctx->digcnt[0], length1, final);
dd->dma_lch_in.dma_conf.src_maxburst = 16;
dd->dma_lch_in.dma_conf.dst_maxburst = 16;
dmaengine_slave_config(dd->dma_lch_in.chan, &dd->dma_lch_in.dma_conf);
if (length2) {
sg_init_table(sg, 2);
sg_dma_address(&sg[0]) = dma_addr1;
sg_dma_len(&sg[0]) = length1;
sg_dma_address(&sg[1]) = dma_addr2;
sg_dma_len(&sg[1]) = length2;
in_desc = dmaengine_prep_slave_sg(dd->dma_lch_in.chan, sg, 2,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
} else {
sg_init_table(sg, 1);
sg_dma_address(&sg[0]) = dma_addr1;
sg_dma_len(&sg[0]) = length1;
in_desc = dmaengine_prep_slave_sg(dd->dma_lch_in.chan, sg, 1,
DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
}
if (!in_desc)
return -EINVAL;
in_desc->callback = atmel_sha_dma_callback;
in_desc->callback_param = dd;
atmel_sha_write_ctrl(dd, 1);
/* should be non-zero before next lines to disable clocks later */
ctx->digcnt[0] += length1;
if (ctx->digcnt[0] < length1)
ctx->digcnt[1]++;
if (final)
dd->flags |= SHA_FLAGS_FINAL; /* catch last interrupt */
dd->flags |= SHA_FLAGS_DMA_ACTIVE;
/* Start DMA transfer */
dmaengine_submit(in_desc);
dma_async_issue_pending(dd->dma_lch_in.chan);
return -EINPROGRESS;
}
static int atmel_sha_xmit_start(struct atmel_sha_dev *dd, dma_addr_t dma_addr1,
size_t length1, dma_addr_t dma_addr2, size_t length2, int final)
{
if (dd->caps.has_dma)
return atmel_sha_xmit_dma(dd, dma_addr1, length1,
dma_addr2, length2, final);
else
return atmel_sha_xmit_pdc(dd, dma_addr1, length1,
dma_addr2, length2, final);
}
static int atmel_sha_update_cpu(struct atmel_sha_dev *dd)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
int bufcnt;
atmel_sha_append_sg(ctx);
atmel_sha_fill_padding(ctx, 0);
bufcnt = ctx->bufcnt;
ctx->bufcnt = 0;
return atmel_sha_xmit_cpu(dd, ctx->buffer, bufcnt, 1);
}
static int atmel_sha_xmit_dma_map(struct atmel_sha_dev *dd,
struct atmel_sha_reqctx *ctx,
size_t length, int final)
{
ctx->dma_addr = dma_map_single(dd->dev, ctx->buffer,
ctx->buflen + ctx->block_size, DMA_TO_DEVICE);
if (dma_mapping_error(dd->dev, ctx->dma_addr)) {
dev_err(dd->dev, "dma %u bytes error\n", ctx->buflen +
ctx->block_size);
return -EINVAL;
}
ctx->flags &= ~SHA_FLAGS_SG;
/* next call does not fail... so no unmap in the case of error */
return atmel_sha_xmit_start(dd, ctx->dma_addr, length, 0, 0, final);
}
static int atmel_sha_update_dma_slow(struct atmel_sha_dev *dd)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
unsigned int final;
size_t count;
atmel_sha_append_sg(ctx);
final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total;
dev_dbg(dd->dev, "slow: bufcnt: %u, digcnt: 0x%llx 0x%llx, final: %d\n",
ctx->bufcnt, ctx->digcnt[1], ctx->digcnt[0], final);
if (final)
atmel_sha_fill_padding(ctx, 0);
if (final || (ctx->bufcnt == ctx->buflen)) {
count = ctx->bufcnt;
ctx->bufcnt = 0;
return atmel_sha_xmit_dma_map(dd, ctx, count, final);
}
return 0;
}
static int atmel_sha_update_dma_start(struct atmel_sha_dev *dd)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
unsigned int length, final, tail;
struct scatterlist *sg;
unsigned int count;
if (!ctx->total)
return 0;
if (ctx->bufcnt || ctx->offset)
return atmel_sha_update_dma_slow(dd);
dev_dbg(dd->dev, "fast: digcnt: 0x%llx 0x%llx, bufcnt: %u, total: %u\n",
ctx->digcnt[1], ctx->digcnt[0], ctx->bufcnt, ctx->total);
sg = ctx->sg;
if (!IS_ALIGNED(sg->offset, sizeof(u32)))
return atmel_sha_update_dma_slow(dd);
if (!sg_is_last(sg) && !IS_ALIGNED(sg->length, ctx->block_size))
/* size is not ctx->block_size aligned */
return atmel_sha_update_dma_slow(dd);
length = min(ctx->total, sg->length);
if (sg_is_last(sg)) {
if (!(ctx->flags & SHA_FLAGS_FINUP)) {
/* not last sg must be ctx->block_size aligned */
tail = length & (ctx->block_size - 1);
length -= tail;
}
}
ctx->total -= length;
ctx->offset = length; /* offset where to start slow */
final = (ctx->flags & SHA_FLAGS_FINUP) && !ctx->total;
/* Add padding */
if (final) {
tail = length & (ctx->block_size - 1);
length -= tail;
ctx->total += tail;
ctx->offset = length; /* offset where to start slow */
sg = ctx->sg;
atmel_sha_append_sg(ctx);
atmel_sha_fill_padding(ctx, length);
ctx->dma_addr = dma_map_single(dd->dev, ctx->buffer,
ctx->buflen + ctx->block_size, DMA_TO_DEVICE);
if (dma_mapping_error(dd->dev, ctx->dma_addr)) {
dev_err(dd->dev, "dma %u bytes error\n",
ctx->buflen + ctx->block_size);
return -EINVAL;
}
if (length == 0) {
ctx->flags &= ~SHA_FLAGS_SG;
count = ctx->bufcnt;
ctx->bufcnt = 0;
return atmel_sha_xmit_start(dd, ctx->dma_addr, count, 0,
0, final);
} else {
ctx->sg = sg;
if (!dma_map_sg(dd->dev, ctx->sg, 1,
DMA_TO_DEVICE)) {
dev_err(dd->dev, "dma_map_sg error\n");
return -EINVAL;
}
ctx->flags |= SHA_FLAGS_SG;
count = ctx->bufcnt;
ctx->bufcnt = 0;
return atmel_sha_xmit_start(dd, sg_dma_address(ctx->sg),
length, ctx->dma_addr, count, final);
}
}
if (!dma_map_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE)) {
dev_err(dd->dev, "dma_map_sg error\n");
return -EINVAL;
}
ctx->flags |= SHA_FLAGS_SG;
/* next call does not fail... so no unmap in the case of error */
return atmel_sha_xmit_start(dd, sg_dma_address(ctx->sg), length, 0,
0, final);
}
static int atmel_sha_update_dma_stop(struct atmel_sha_dev *dd)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(dd->req);
if (ctx->flags & SHA_FLAGS_SG) {
dma_unmap_sg(dd->dev, ctx->sg, 1, DMA_TO_DEVICE);
if (ctx->sg->length == ctx->offset) {
ctx->sg = sg_next(ctx->sg);
if (ctx->sg)
ctx->offset = 0;
}
if (ctx->flags & SHA_FLAGS_PAD) {
dma_unmap_single(dd->dev, ctx->dma_addr,
ctx->buflen + ctx->block_size, DMA_TO_DEVICE);
}
} else {
dma_unmap_single(dd->dev, ctx->dma_addr, ctx->buflen +
ctx->block_size, DMA_TO_DEVICE);
}
return 0;
}
static int atmel_sha_update_req(struct atmel_sha_dev *dd)
{
struct ahash_request *req = dd->req;
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
int err;
dev_dbg(dd->dev, "update_req: total: %u, digcnt: 0x%llx 0x%llx\n",
ctx->total, ctx->digcnt[1], ctx->digcnt[0]);
if (ctx->flags & SHA_FLAGS_CPU)
err = atmel_sha_update_cpu(dd);
else
err = atmel_sha_update_dma_start(dd);
/* wait for dma completion before can take more data */
dev_dbg(dd->dev, "update: err: %d, digcnt: 0x%llx 0%llx\n",
err, ctx->digcnt[1], ctx->digcnt[0]);
return err;
}
static int atmel_sha_final_req(struct atmel_sha_dev *dd)
{
struct ahash_request *req = dd->req;
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
int err = 0;
int count;
if (ctx->bufcnt >= ATMEL_SHA_DMA_THRESHOLD) {
atmel_sha_fill_padding(ctx, 0);
count = ctx->bufcnt;
ctx->bufcnt = 0;
err = atmel_sha_xmit_dma_map(dd, ctx, count, 1);
}
/* faster to handle last block with cpu */
else {
atmel_sha_fill_padding(ctx, 0);
count = ctx->bufcnt;
ctx->bufcnt = 0;
err = atmel_sha_xmit_cpu(dd, ctx->buffer, count, 1);
}
dev_dbg(dd->dev, "final_req: err: %d\n", err);
return err;
}
static void atmel_sha_copy_hash(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
u32 *hash = (u32 *)ctx->digest;
unsigned int i, hashsize;
switch (ctx->flags & SHA_FLAGS_ALGO_MASK) {
case SHA_FLAGS_SHA1:
hashsize = SHA1_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA224:
case SHA_FLAGS_SHA256:
hashsize = SHA256_DIGEST_SIZE;
break;
case SHA_FLAGS_SHA384:
case SHA_FLAGS_SHA512:
hashsize = SHA512_DIGEST_SIZE;
break;
default:
/* Should not happen... */
return;
}
for (i = 0; i < hashsize / sizeof(u32); ++i)
hash[i] = atmel_sha_read(ctx->dd, SHA_REG_DIGEST(i));
ctx->flags |= SHA_FLAGS_RESTORE;
}
static void atmel_sha_copy_ready_hash(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
if (!req->result)
return;
if (ctx->flags & SHA_FLAGS_SHA1)
memcpy(req->result, ctx->digest, SHA1_DIGEST_SIZE);
else if (ctx->flags & SHA_FLAGS_SHA224)
memcpy(req->result, ctx->digest, SHA224_DIGEST_SIZE);
else if (ctx->flags & SHA_FLAGS_SHA256)
memcpy(req->result, ctx->digest, SHA256_DIGEST_SIZE);
else if (ctx->flags & SHA_FLAGS_SHA384)
memcpy(req->result, ctx->digest, SHA384_DIGEST_SIZE);
else
memcpy(req->result, ctx->digest, SHA512_DIGEST_SIZE);
}
static int atmel_sha_finish(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
struct atmel_sha_dev *dd = ctx->dd;
if (ctx->digcnt[0] || ctx->digcnt[1])
atmel_sha_copy_ready_hash(req);
dev_dbg(dd->dev, "digcnt: 0x%llx 0x%llx, bufcnt: %d\n", ctx->digcnt[1],
ctx->digcnt[0], ctx->bufcnt);
return 0;
}
static void atmel_sha_finish_req(struct ahash_request *req, int err)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
struct atmel_sha_dev *dd = ctx->dd;
if (!err) {
atmel_sha_copy_hash(req);
if (SHA_FLAGS_FINAL & dd->flags)
err = atmel_sha_finish(req);
} else {
ctx->flags |= SHA_FLAGS_ERROR;
}
/* atomic operation is not needed here */
dd->flags &= ~(SHA_FLAGS_BUSY | SHA_FLAGS_FINAL | SHA_FLAGS_CPU |
SHA_FLAGS_DMA_READY | SHA_FLAGS_OUTPUT_READY);
clk_disable(dd->iclk);
if (req->base.complete)
req->base.complete(&req->base, err);
/* handle new request */
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
tasklet_schedule(&dd->queue_task);
}
static int atmel_sha_hw_init(struct atmel_sha_dev *dd)
{
int err;
err = clk_enable(dd->iclk);
if (err)
return err;
if (!(SHA_FLAGS_INIT & dd->flags)) {
atmel_sha_write(dd, SHA_CR, SHA_CR_SWRST);
dd->flags |= SHA_FLAGS_INIT;
dd->err = 0;
}
return 0;
}
static inline unsigned int atmel_sha_get_version(struct atmel_sha_dev *dd)
{
return atmel_sha_read(dd, SHA_HW_VERSION) & 0x00000fff;
}
static void atmel_sha_hw_version_init(struct atmel_sha_dev *dd)
{
atmel_sha_hw_init(dd);
dd->hw_version = atmel_sha_get_version(dd);
dev_info(dd->dev,
"version: 0x%x\n", dd->hw_version);
clk_disable(dd->iclk);
}
static int atmel_sha_handle_queue(struct atmel_sha_dev *dd,
struct ahash_request *req)
{
struct crypto_async_request *async_req, *backlog;
struct atmel_sha_reqctx *ctx;
unsigned long flags;
int err = 0, ret = 0;
spin_lock_irqsave(&dd->lock, flags);
if (req)
ret = ahash_enqueue_request(&dd->queue, req);
if (SHA_FLAGS_BUSY & dd->flags) {
spin_unlock_irqrestore(&dd->lock, flags);
return ret;
}
backlog = crypto_get_backlog(&dd->queue);
async_req = crypto_dequeue_request(&dd->queue);
if (async_req)
dd->flags |= SHA_FLAGS_BUSY;
spin_unlock_irqrestore(&dd->lock, flags);
if (!async_req)
return ret;
if (backlog)
backlog->complete(backlog, -EINPROGRESS);
req = ahash_request_cast(async_req);
dd->req = req;
ctx = ahash_request_ctx(req);
dev_dbg(dd->dev, "handling new req, op: %lu, nbytes: %d\n",
ctx->op, req->nbytes);
err = atmel_sha_hw_init(dd);
if (err)
goto err1;
if (ctx->op == SHA_OP_UPDATE) {
err = atmel_sha_update_req(dd);
if (err != -EINPROGRESS && (ctx->flags & SHA_FLAGS_FINUP))
/* no final() after finup() */
err = atmel_sha_final_req(dd);
} else if (ctx->op == SHA_OP_FINAL) {
err = atmel_sha_final_req(dd);
}
err1:
if (err != -EINPROGRESS)
/* done_task will not finish it, so do it here */
atmel_sha_finish_req(req, err);
dev_dbg(dd->dev, "exit, err: %d\n", err);
return ret;
}
static int atmel_sha_enqueue(struct ahash_request *req, unsigned int op)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
struct atmel_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
struct atmel_sha_dev *dd = tctx->dd;
ctx->op = op;
return atmel_sha_handle_queue(dd, req);
}
static int atmel_sha_update(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
if (!req->nbytes)
return 0;
ctx->total = req->nbytes;
ctx->sg = req->src;
ctx->offset = 0;
if (ctx->flags & SHA_FLAGS_FINUP) {
if (ctx->bufcnt + ctx->total < ATMEL_SHA_DMA_THRESHOLD)
/* faster to use CPU for short transfers */
ctx->flags |= SHA_FLAGS_CPU;
} else if (ctx->bufcnt + ctx->total < ctx->buflen) {
atmel_sha_append_sg(ctx);
return 0;
}
return atmel_sha_enqueue(req, SHA_OP_UPDATE);
}
static int atmel_sha_final(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
ctx->flags |= SHA_FLAGS_FINUP;
if (ctx->flags & SHA_FLAGS_ERROR)
return 0; /* uncompleted hash is not needed */
if (ctx->flags & SHA_FLAGS_PAD)
/* copy ready hash (+ finalize hmac) */
return atmel_sha_finish(req);
return atmel_sha_enqueue(req, SHA_OP_FINAL);
}
static int atmel_sha_finup(struct ahash_request *req)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
int err1, err2;
ctx->flags |= SHA_FLAGS_FINUP;
err1 = atmel_sha_update(req);
if (err1 == -EINPROGRESS || err1 == -EBUSY)
return err1;
/*
* final() has to be always called to cleanup resources
* even if udpate() failed, except EINPROGRESS
*/
err2 = atmel_sha_final(req);
return err1 ?: err2;
}
static int atmel_sha_digest(struct ahash_request *req)
{
return atmel_sha_init(req) ?: atmel_sha_finup(req);
}
static int atmel_sha_export(struct ahash_request *req, void *out)
{
const struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
memcpy(out, ctx, sizeof(*ctx));
return 0;
}
static int atmel_sha_import(struct ahash_request *req, const void *in)
{
struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
memcpy(ctx, in, sizeof(*ctx));
return 0;
}
static int atmel_sha_cra_init(struct crypto_tfm *tfm)
{
crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
sizeof(struct atmel_sha_reqctx));
return 0;
}
static struct ahash_alg sha_1_256_algs[] = {
{
.init = atmel_sha_init,
.update = atmel_sha_update,
.final = atmel_sha_final,
.finup = atmel_sha_finup,
.digest = atmel_sha_digest,
.export = atmel_sha_export,
.import = atmel_sha_import,
.halg = {
.digestsize = SHA1_DIGEST_SIZE,
.statesize = sizeof(struct atmel_sha_reqctx),
.base = {
.cra_name = "sha1",
.cra_driver_name = "atmel-sha1",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = SHA1_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct atmel_sha_ctx),
.cra_alignmask = 0,
.cra_module = THIS_MODULE,
.cra_init = atmel_sha_cra_init,
}
}
},
{
.init = atmel_sha_init,
.update = atmel_sha_update,
.final = atmel_sha_final,
.finup = atmel_sha_finup,
.digest = atmel_sha_digest,
.export = atmel_sha_export,
.import = atmel_sha_import,
.halg = {
.digestsize = SHA256_DIGEST_SIZE,
.statesize = sizeof(struct atmel_sha_reqctx),
.base = {
.cra_name = "sha256",
.cra_driver_name = "atmel-sha256",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = SHA256_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct atmel_sha_ctx),
.cra_alignmask = 0,
.cra_module = THIS_MODULE,
.cra_init = atmel_sha_cra_init,
}
}
},
};
static struct ahash_alg sha_224_alg = {
.init = atmel_sha_init,
.update = atmel_sha_update,
.final = atmel_sha_final,
.finup = atmel_sha_finup,
.digest = atmel_sha_digest,
.export = atmel_sha_export,
.import = atmel_sha_import,
.halg = {
.digestsize = SHA224_DIGEST_SIZE,
.statesize = sizeof(struct atmel_sha_reqctx),
.base = {
.cra_name = "sha224",
.cra_driver_name = "atmel-sha224",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = SHA224_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct atmel_sha_ctx),
.cra_alignmask = 0,
.cra_module = THIS_MODULE,
.cra_init = atmel_sha_cra_init,
}
}
};
static struct ahash_alg sha_384_512_algs[] = {
{
.init = atmel_sha_init,
.update = atmel_sha_update,
.final = atmel_sha_final,
.finup = atmel_sha_finup,
.digest = atmel_sha_digest,
.export = atmel_sha_export,
.import = atmel_sha_import,
.halg = {
.digestsize = SHA384_DIGEST_SIZE,
.statesize = sizeof(struct atmel_sha_reqctx),
.base = {
.cra_name = "sha384",
.cra_driver_name = "atmel-sha384",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = SHA384_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct atmel_sha_ctx),
.cra_alignmask = 0x3,
.cra_module = THIS_MODULE,
.cra_init = atmel_sha_cra_init,
}
}
},
{
.init = atmel_sha_init,
.update = atmel_sha_update,
.final = atmel_sha_final,
.finup = atmel_sha_finup,
.digest = atmel_sha_digest,
.export = atmel_sha_export,
.import = atmel_sha_import,
.halg = {
.digestsize = SHA512_DIGEST_SIZE,
.statesize = sizeof(struct atmel_sha_reqctx),
.base = {
.cra_name = "sha512",
.cra_driver_name = "atmel-sha512",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_ASYNC,
.cra_blocksize = SHA512_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct atmel_sha_ctx),
.cra_alignmask = 0x3,
.cra_module = THIS_MODULE,
.cra_init = atmel_sha_cra_init,
}
}
},
};
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
static void atmel_sha_queue_task(unsigned long data)
{
struct atmel_sha_dev *dd = (struct atmel_sha_dev *)data;
atmel_sha_handle_queue(dd, NULL);
}
static void atmel_sha_done_task(unsigned long data)
{
struct atmel_sha_dev *dd = (struct atmel_sha_dev *)data;
int err = 0;
if (SHA_FLAGS_CPU & dd->flags) {
if (SHA_FLAGS_OUTPUT_READY & dd->flags) {
dd->flags &= ~SHA_FLAGS_OUTPUT_READY;
goto finish;
}
} else if (SHA_FLAGS_DMA_READY & dd->flags) {
if (SHA_FLAGS_DMA_ACTIVE & dd->flags) {
dd->flags &= ~SHA_FLAGS_DMA_ACTIVE;
atmel_sha_update_dma_stop(dd);
if (dd->err) {
err = dd->err;
goto finish;
}
}
if (SHA_FLAGS_OUTPUT_READY & dd->flags) {
/* hash or semi-hash ready */
dd->flags &= ~(SHA_FLAGS_DMA_READY |
SHA_FLAGS_OUTPUT_READY);
err = atmel_sha_update_dma_start(dd);
if (err != -EINPROGRESS)
goto finish;
}
}
return;
finish:
/* finish curent request */
atmel_sha_finish_req(dd->req, err);
}
static irqreturn_t atmel_sha_irq(int irq, void *dev_id)
{
struct atmel_sha_dev *sha_dd = dev_id;
u32 reg;
reg = atmel_sha_read(sha_dd, SHA_ISR);
if (reg & atmel_sha_read(sha_dd, SHA_IMR)) {
atmel_sha_write(sha_dd, SHA_IDR, reg);
if (SHA_FLAGS_BUSY & sha_dd->flags) {
sha_dd->flags |= SHA_FLAGS_OUTPUT_READY;
if (!(SHA_FLAGS_CPU & sha_dd->flags))
sha_dd->flags |= SHA_FLAGS_DMA_READY;
tasklet_schedule(&sha_dd->done_task);
} else {
dev_warn(sha_dd->dev, "SHA interrupt when no active requests.\n");
}
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static void atmel_sha_unregister_algs(struct atmel_sha_dev *dd)
{
int i;
for (i = 0; i < ARRAY_SIZE(sha_1_256_algs); i++)
crypto_unregister_ahash(&sha_1_256_algs[i]);
if (dd->caps.has_sha224)
crypto_unregister_ahash(&sha_224_alg);
if (dd->caps.has_sha_384_512) {
for (i = 0; i < ARRAY_SIZE(sha_384_512_algs); i++)
crypto_unregister_ahash(&sha_384_512_algs[i]);
}
}
static int atmel_sha_register_algs(struct atmel_sha_dev *dd)
{
int err, i, j;
for (i = 0; i < ARRAY_SIZE(sha_1_256_algs); i++) {
err = crypto_register_ahash(&sha_1_256_algs[i]);
if (err)
goto err_sha_1_256_algs;
}
if (dd->caps.has_sha224) {
err = crypto_register_ahash(&sha_224_alg);
if (err)
goto err_sha_224_algs;
}
if (dd->caps.has_sha_384_512) {
for (i = 0; i < ARRAY_SIZE(sha_384_512_algs); i++) {
err = crypto_register_ahash(&sha_384_512_algs[i]);
if (err)
goto err_sha_384_512_algs;
}
}
return 0;
err_sha_384_512_algs:
for (j = 0; j < i; j++)
crypto_unregister_ahash(&sha_384_512_algs[j]);
crypto_unregister_ahash(&sha_224_alg);
err_sha_224_algs:
i = ARRAY_SIZE(sha_1_256_algs);
err_sha_1_256_algs:
for (j = 0; j < i; j++)
crypto_unregister_ahash(&sha_1_256_algs[j]);
return err;
}
static bool atmel_sha_filter(struct dma_chan *chan, void *slave)
{
struct at_dma_slave *sl = slave;
if (sl && sl->dma_dev == chan->device->dev) {
chan->private = sl;
return true;
} else {
return false;
}
}
static int atmel_sha_dma_init(struct atmel_sha_dev *dd,
struct crypto_platform_data *pdata)
{
int err = -ENOMEM;
dma_cap_mask_t mask_in;
/* Try to grab DMA channel */
dma_cap_zero(mask_in);
dma_cap_set(DMA_SLAVE, mask_in);
dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in,
atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
if (!dd->dma_lch_in.chan) {
dev_warn(dd->dev, "no DMA channel available\n");
return err;
}
dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
SHA_REG_DIN(0);
dd->dma_lch_in.dma_conf.src_maxburst = 1;
dd->dma_lch_in.dma_conf.src_addr_width =
DMA_SLAVE_BUSWIDTH_4_BYTES;
dd->dma_lch_in.dma_conf.dst_maxburst = 1;
dd->dma_lch_in.dma_conf.dst_addr_width =
DMA_SLAVE_BUSWIDTH_4_BYTES;
dd->dma_lch_in.dma_conf.device_fc = false;
return 0;
}
static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd)
{
dma_release_channel(dd->dma_lch_in.chan);
}
static void atmel_sha_get_cap(struct atmel_sha_dev *dd)
{
dd->caps.has_dma = 0;
dd->caps.has_dualbuff = 0;
dd->caps.has_sha224 = 0;
dd->caps.has_sha_384_512 = 0;
dd->caps.has_uihv = 0;
/* keep only major version number */
switch (dd->hw_version & 0xff0) {
case 0x510:
dd->caps.has_dma = 1;
dd->caps.has_dualbuff = 1;
dd->caps.has_sha224 = 1;
dd->caps.has_sha_384_512 = 1;
dd->caps.has_uihv = 1;
break;
case 0x420:
dd->caps.has_dma = 1;
dd->caps.has_dualbuff = 1;
dd->caps.has_sha224 = 1;
dd->caps.has_sha_384_512 = 1;
dd->caps.has_uihv = 1;
break;
case 0x410:
dd->caps.has_dma = 1;
dd->caps.has_dualbuff = 1;
dd->caps.has_sha224 = 1;
dd->caps.has_sha_384_512 = 1;
break;
case 0x400:
dd->caps.has_dma = 1;
dd->caps.has_dualbuff = 1;
dd->caps.has_sha224 = 1;
break;
case 0x320:
break;
default:
dev_warn(dd->dev,
"Unmanaged sha version, set minimum capabilities\n");
break;
}
}
#if defined(CONFIG_OF)
static const struct of_device_id atmel_sha_dt_ids[] = {
{ .compatible = "atmel,at91sam9g46-sha" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids);
static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct crypto_platform_data *pdata;
if (!np) {
dev_err(&pdev->dev, "device node not found\n");
return ERR_PTR(-EINVAL);
}
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev, "could not allocate memory for pdata\n");
return ERR_PTR(-ENOMEM);
}
pdata->dma_slave = devm_kzalloc(&pdev->dev,
sizeof(*(pdata->dma_slave)),
GFP_KERNEL);
if (!pdata->dma_slave) {
dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
return ERR_PTR(-ENOMEM);
}
return pdata;
}
#else /* CONFIG_OF */
static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev)
{
return ERR_PTR(-EINVAL);
}
#endif
static int atmel_sha_probe(struct platform_device *pdev)
{
struct atmel_sha_dev *sha_dd;
struct crypto_platform_data *pdata;
struct device *dev = &pdev->dev;
struct resource *sha_res;
int err;
sha_dd = devm_kzalloc(&pdev->dev, sizeof(*sha_dd), GFP_KERNEL);
if (sha_dd == NULL) {
dev_err(dev, "unable to alloc data struct.\n");
err = -ENOMEM;
goto sha_dd_err;
}
sha_dd->dev = dev;
platform_set_drvdata(pdev, sha_dd);
INIT_LIST_HEAD(&sha_dd->list);
spin_lock_init(&sha_dd->lock);
tasklet_init(&sha_dd->done_task, atmel_sha_done_task,
(unsigned long)sha_dd);
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
tasklet_init(&sha_dd->queue_task, atmel_sha_queue_task,
(unsigned long)sha_dd);
crypto_init_queue(&sha_dd->queue, ATMEL_SHA_QUEUE_LENGTH);
sha_dd->irq = -1;
/* Get the base address */
sha_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!sha_res) {
dev_err(dev, "no MEM resource info\n");
err = -ENODEV;
goto res_err;
}
sha_dd->phys_base = sha_res->start;
/* Get the IRQ */
sha_dd->irq = platform_get_irq(pdev, 0);
if (sha_dd->irq < 0) {
dev_err(dev, "no IRQ resource info\n");
err = sha_dd->irq;
goto res_err;
}
err = devm_request_irq(&pdev->dev, sha_dd->irq, atmel_sha_irq,
IRQF_SHARED, "atmel-sha", sha_dd);
if (err) {
dev_err(dev, "unable to request sha irq.\n");
goto res_err;
}
/* Initializing the clock */
sha_dd->iclk = devm_clk_get(&pdev->dev, "sha_clk");
if (IS_ERR(sha_dd->iclk)) {
dev_err(dev, "clock initialization failed.\n");
err = PTR_ERR(sha_dd->iclk);
goto res_err;
}
sha_dd->io_base = devm_ioremap_resource(&pdev->dev, sha_res);
if (IS_ERR(sha_dd->io_base)) {
dev_err(dev, "can't ioremap\n");
err = PTR_ERR(sha_dd->io_base);
goto res_err;
}
err = clk_prepare(sha_dd->iclk);
if (err)
goto res_err;
atmel_sha_hw_version_init(sha_dd);
atmel_sha_get_cap(sha_dd);
if (sha_dd->caps.has_dma) {
pdata = pdev->dev.platform_data;
if (!pdata) {
pdata = atmel_sha_of_init(pdev);
if (IS_ERR(pdata)) {
dev_err(&pdev->dev, "platform data not available\n");
err = PTR_ERR(pdata);
goto iclk_unprepare;
}
}
if (!pdata->dma_slave) {
err = -ENXIO;
goto iclk_unprepare;
}
err = atmel_sha_dma_init(sha_dd, pdata);
if (err)
goto err_sha_dma;
dev_info(dev, "using %s for DMA transfers\n",
dma_chan_name(sha_dd->dma_lch_in.chan));
}
spin_lock(&atmel_sha.lock);
list_add_tail(&sha_dd->list, &atmel_sha.dev_list);
spin_unlock(&atmel_sha.lock);
err = atmel_sha_register_algs(sha_dd);
if (err)
goto err_algs;
dev_info(dev, "Atmel SHA1/SHA256%s%s\n",
sha_dd->caps.has_sha224 ? "/SHA224" : "",
sha_dd->caps.has_sha_384_512 ? "/SHA384/SHA512" : "");
return 0;
err_algs:
spin_lock(&atmel_sha.lock);
list_del(&sha_dd->list);
spin_unlock(&atmel_sha.lock);
if (sha_dd->caps.has_dma)
atmel_sha_dma_cleanup(sha_dd);
err_sha_dma:
iclk_unprepare:
clk_unprepare(sha_dd->iclk);
res_err:
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
tasklet_kill(&sha_dd->queue_task);
tasklet_kill(&sha_dd->done_task);
sha_dd_err:
dev_err(dev, "initialization failed.\n");
return err;
}
static int atmel_sha_remove(struct platform_device *pdev)
{
static struct atmel_sha_dev *sha_dd;
sha_dd = platform_get_drvdata(pdev);
if (!sha_dd)
return -ENODEV;
spin_lock(&atmel_sha.lock);
list_del(&sha_dd->list);
spin_unlock(&atmel_sha.lock);
atmel_sha_unregister_algs(sha_dd);
crypto: atmel-sha - fix a race between the 'done' tasklet and the crypto client The 'done' tasklet handler used to check the 'BUSY' flag to either finalize the processing of a crypto request which had just completed or manage the crypto queue to start the next crypto request. On request R1 completion, the driver calls atmel_sha_finish_req(), which: 1 - clears the 'BUSY' flag since the hardware is no longer used and is ready again to process new crypto requests. 2 - notifies the above layer (the client) about the completion of the asynchronous crypto request R1 by calling its base.complete() callback. 3 - schedules the 'done' task to check the crypto queue and start to process the next crypto request (the 'BUSY' flag is supposed to be cleared at that moment) if such a pending request exists. However step 2 might wake the client up so it can now ask our driver to process a new crypto request R2. This request is enqueued by calling the atmel_sha_handle_queue() function, which sets the 'BUSY' flags then starts to process R2. If the 'done' tasklet, scheduled by step 3, runs just after, it would see that the 'BUSY' flag is set then understand that R2 has just completed, which is wrong! So the state of 'BUSY' flag is not a proper way to detect and handle crypto request completion. This patch fixes this race condition by using two different tasklets, one to handle the crypto request completion events, the other to manage the crypto queue if needed. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-15 22:49:32 +08:00
tasklet_kill(&sha_dd->queue_task);
tasklet_kill(&sha_dd->done_task);
if (sha_dd->caps.has_dma)
atmel_sha_dma_cleanup(sha_dd);
clk_unprepare(sha_dd->iclk);
return 0;
}
static struct platform_driver atmel_sha_driver = {
.probe = atmel_sha_probe,
.remove = atmel_sha_remove,
.driver = {
.name = "atmel_sha",
.of_match_table = of_match_ptr(atmel_sha_dt_ids),
},
};
module_platform_driver(atmel_sha_driver);
MODULE_DESCRIPTION("Atmel SHA (1/256/224/384/512) hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Nicolas Royer - Eukréa Electromatique");