linux-sg2042/drivers/net/usb/smsc95xx.c

2194 lines
55 KiB
C
Raw Normal View History

/***************************************************************************
*
* Copyright (C) 2007-2008 SMSC
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
*****************************************************************************/
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/bitrev.h>
#include <linux/crc16.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/of_net.h>
#include "smsc95xx.h"
#define SMSC_CHIPNAME "smsc95xx"
#define SMSC_DRIVER_VERSION "1.0.5"
#define HS_USB_PKT_SIZE (512)
#define FS_USB_PKT_SIZE (64)
#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
#define DEFAULT_BULK_IN_DELAY (0x00002000)
#define MAX_SINGLE_PACKET_SIZE (2048)
#define LAN95XX_EEPROM_MAGIC (0x9500)
#define EEPROM_MAC_OFFSET (0x01)
#define DEFAULT_TX_CSUM_ENABLE (true)
#define DEFAULT_RX_CSUM_ENABLE (true)
#define SMSC95XX_INTERNAL_PHY_ID (1)
#define SMSC95XX_TX_OVERHEAD (8)
#define SMSC95XX_TX_OVERHEAD_CSUM (12)
#define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
#define FEATURE_8_WAKEUP_FILTERS (0x01)
#define FEATURE_PHY_NLP_CROSSOVER (0x02)
#define FEATURE_REMOTE_WAKEUP (0x04)
#define SUSPEND_SUSPEND0 (0x01)
#define SUSPEND_SUSPEND1 (0x02)
#define SUSPEND_SUSPEND2 (0x04)
#define SUSPEND_SUSPEND3 (0x08)
#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
#define CARRIER_CHECK_DELAY (2 * HZ)
struct smsc95xx_priv {
u32 chip_id;
u32 mac_cr;
NET: smsc95xx: don't use stack for async writes to the device The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18 11:53:58 +08:00
u32 hash_hi;
u32 hash_lo;
u32 wolopts;
spinlock_t mac_cr_lock;
u8 features;
u8 suspend_flags;
u8 mdix_ctrl;
bool link_ok;
struct delayed_work carrier_check;
struct usbnet *dev;
};
static bool turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
u32 *data, int in_pm)
{
u32 buf;
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
BUG_ON(!dev);
if (!in_pm)
fn = usbnet_read_cmd;
else
fn = usbnet_read_cmd_nopm;
ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0)) {
netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
index, ret);
return ret;
}
le32_to_cpus(&buf);
*data = buf;
return ret;
}
static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
u32 data, int in_pm)
{
u32 buf;
int ret;
int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
BUG_ON(!dev);
if (!in_pm)
fn = usbnet_write_cmd;
else
fn = usbnet_write_cmd_nopm;
buf = data;
cpu_to_le32s(&buf);
ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
| USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, &buf, 4);
if (unlikely(ret < 0))
netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
index, ret);
return ret;
}
static int __must_check smsc95xx_read_reg_nopm(struct usbnet *dev, u32 index,
u32 *data)
{
return __smsc95xx_read_reg(dev, index, data, 1);
}
static int __must_check smsc95xx_write_reg_nopm(struct usbnet *dev, u32 index,
u32 data)
{
return __smsc95xx_write_reg(dev, index, data, 1);
}
static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
u32 *data)
{
return __smsc95xx_read_reg(dev, index, data, 0);
}
static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
u32 data)
{
return __smsc95xx_write_reg(dev, index, data, 0);
}
/* Loop until the read is completed with timeout
* called with phy_mutex held */
static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
int in_pm)
{
unsigned long start_time = jiffies;
u32 val;
int ret;
do {
ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Error reading MII_ACCESS\n");
return ret;
}
if (!(val & MII_BUSY_))
return 0;
} while (!time_after(jiffies, start_time + HZ));
return -EIO;
}
static int __smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
int ret;
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n");
goto done;
}
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_READ_ | MII_BUSY_;
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Error writing MII_ADDR\n");
goto done;
}
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
goto done;
}
ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Error reading MII_DATA\n");
goto done;
}
ret = (u16)(val & 0xFFFF);
done:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static void __smsc95xx_mdio_write(struct net_device *netdev, int phy_id,
int idx, int regval, int in_pm)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
int ret;
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n");
goto done;
}
val = regval;
ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Error writing MII_DATA\n");
goto done;
}
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_WRITE_ | MII_BUSY_;
ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Error writing MII_ADDR\n");
goto done;
}
ret = __smsc95xx_phy_wait_not_busy(dev, in_pm);
if (ret < 0) {
netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
goto done;
}
done:
mutex_unlock(&dev->phy_mutex);
}
static int smsc95xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
int idx)
{
return __smsc95xx_mdio_read(netdev, phy_id, idx, 1);
}
static void smsc95xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
int idx, int regval)
{
__smsc95xx_mdio_write(netdev, phy_id, idx, regval, 1);
}
static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
{
return __smsc95xx_mdio_read(netdev, phy_id, idx, 0);
}
static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
int regval)
{
__smsc95xx_mdio_write(netdev, phy_id, idx, regval, 0);
}
static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
{
unsigned long start_time = jiffies;
u32 val;
int ret;
do {
ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
if (ret < 0) {
netdev_warn(dev->net, "Error reading E2P_CMD\n");
return ret;
}
if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
break;
udelay(40);
} while (!time_after(jiffies, start_time + HZ));
if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
netdev_warn(dev->net, "EEPROM read operation timeout\n");
return -EIO;
}
return 0;
}
static int __must_check smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
{
unsigned long start_time = jiffies;
u32 val;
int ret;
do {
ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
if (ret < 0) {
netdev_warn(dev->net, "Error reading E2P_CMD\n");
return ret;
}
if (!(val & E2P_CMD_BUSY_))
return 0;
udelay(40);
} while (!time_after(jiffies, start_time + HZ));
netdev_warn(dev->net, "EEPROM is busy\n");
return -EIO;
}
static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
u8 *data)
{
u32 val;
int i, ret;
BUG_ON(!dev);
BUG_ON(!data);
ret = smsc95xx_eeprom_confirm_not_busy(dev);
if (ret)
return ret;
for (i = 0; i < length; i++) {
val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
if (ret < 0) {
netdev_warn(dev->net, "Error writing E2P_CMD\n");
return ret;
}
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
if (ret < 0) {
netdev_warn(dev->net, "Error reading E2P_DATA\n");
return ret;
}
data[i] = val & 0xFF;
offset++;
}
return 0;
}
static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
u8 *data)
{
u32 val;
int i, ret;
BUG_ON(!dev);
BUG_ON(!data);
ret = smsc95xx_eeprom_confirm_not_busy(dev);
if (ret)
return ret;
/* Issue write/erase enable command */
val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
if (ret < 0) {
netdev_warn(dev->net, "Error writing E2P_DATA\n");
return ret;
}
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
return ret;
for (i = 0; i < length; i++) {
/* Fill data register */
val = data[i];
ret = smsc95xx_write_reg(dev, E2P_DATA, val);
if (ret < 0) {
netdev_warn(dev->net, "Error writing E2P_DATA\n");
return ret;
}
/* Send "write" command */
val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
ret = smsc95xx_write_reg(dev, E2P_CMD, val);
if (ret < 0) {
netdev_warn(dev->net, "Error writing E2P_CMD\n");
return ret;
}
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
return ret;
offset++;
}
return 0;
}
static int __must_check smsc95xx_write_reg_async(struct usbnet *dev, u16 index,
u32 data)
{
const u16 size = 4;
u32 buf;
int ret;
buf = data;
cpu_to_le32s(&buf);
ret = usbnet_write_cmd_async(dev, USB_VENDOR_REQUEST_WRITE_REGISTER,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE,
0, index, &buf, size);
if (ret < 0)
netdev_warn(dev->net, "Error write async cmd, sts=%d\n",
ret);
return ret;
}
/* returns hash bit number for given MAC address
* example:
* 01 00 5E 00 00 01 -> returns bit number 31 */
static unsigned int smsc95xx_hash(char addr[ETH_ALEN])
{
return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
}
static void smsc95xx_set_multicast(struct net_device *netdev)
{
struct usbnet *dev = netdev_priv(netdev);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
int ret;
NET: smsc95xx: don't use stack for async writes to the device The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18 11:53:58 +08:00
pdata->hash_hi = 0;
pdata->hash_lo = 0;
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
if (dev->net->flags & IFF_PROMISC) {
netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
pdata->mac_cr |= MAC_CR_PRMS_;
pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
} else if (dev->net->flags & IFF_ALLMULTI) {
netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
pdata->mac_cr |= MAC_CR_MCPAS_;
pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
} else if (!netdev_mc_empty(dev->net)) {
struct netdev_hw_addr *ha;
pdata->mac_cr |= MAC_CR_HPFILT_;
pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
netdev_for_each_mc_addr(ha, netdev) {
u32 bitnum = smsc95xx_hash(ha->addr);
u32 mask = 0x01 << (bitnum & 0x1F);
if (bitnum & 0x20)
NET: smsc95xx: don't use stack for async writes to the device The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18 11:53:58 +08:00
pdata->hash_hi |= mask;
else
NET: smsc95xx: don't use stack for async writes to the device The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18 11:53:58 +08:00
pdata->hash_lo |= mask;
}
netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
NET: smsc95xx: don't use stack for async writes to the device The set_multicast operation performs asynchronous writes to the device, with some addresses pointing to the stack. Bad things may happen, and this is trapped CONFIG_DMA_API_DEBUG: [ 5.237762] WARNING: at /build/buildd/linux-linaro-omap-2.6.38/lib/dma-debug.c:867 check_for_stack+0xd4/0x100() [ 5.237792] ehci-omap ehci-omap.0: DMA-API: device driver maps memory fromstack [addr=d9c77dec] [ 5.237792] Modules linked in: smsc95xx(+) usbnet twl6030_usb twl4030_pwrbutton leds_gpio omap_wdt omap2_mcspi [ 5.237854] [<c006d618>] (unwind_backtrace+0x0/0xf8) from [<c00a6a14>] (warn_slowpath_common+0x54/0x64) [ 5.237884] [<c00a6a14>] (warn_slowpath_common+0x54/0x64) from [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) [ 5.237915] [<c00a6ab8>] (warn_slowpath_fmt+0x30/0x40) from [<c034e9d8>] (check_for_stack+0xd4/0x100) [ 5.237915] [<c034e9d8>] (check_for_stack+0xd4/0x100) from [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) [ 5.237976] [<c034fea8>] (debug_dma_map_page+0xb4/0xdc) from [<c04242f0>] (map_urb_for_dma+0x26c/0x304) [ 5.237976] [<c04242f0>] (map_urb_for_dma+0x26c/0x304) from [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) [ 5.238037] [<c0424594>] (usb_hcd_submit_urb+0x78/0x19c) from [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) [ 5.238067] [<bf049c5c>] (smsc95xx_write_reg_async+0xb4/0x130 [smsc95xx]) from [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) [ 5.238098] [<bf049dd4>] (smsc95xx_set_multicast+0xfc/0x148 [smsc95xx]) from [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) [ 5.238128] [<bf04a118>] (smsc95xx_reset+0x2f8/0x68c [smsc95xx]) from [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) [ 5.238159] [<bf04a8cc>] (smsc95xx_bind+0xcc/0x188 [smsc95xx]) from [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) [ 5.238220] [<bf03ef1c>] (usbnet_probe+0x204/0x4c4 [usbnet]) from [<c0429078>] (usb_probe_interface+0xe4/0x1c4) [ 5.238250] [<c0429078>] (usb_probe_interface+0xe4/0x1c4) from [<c03a8770>] (really_probe+0x64/0x160) [ 5.238250] [<c03a8770>] (really_probe+0x64/0x160) from [<c03a8a30>] (driver_probe_device+0x48/0x60) [ 5.238281] [<c03a8a30>] (driver_probe_device+0x48/0x60) from [<c03a8ad4>] (__driver_attach+0x8c/0x90) [ 5.238311] [<c03a8ad4>] (__driver_attach+0x8c/0x90) from [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) [ 5.238311] [<c03a7b24>] (bus_for_each_dev+0x50/0x7c) from [<c03a82ec>] (bus_add_driver+0x190/0x250) [ 5.238311] [<c03a82ec>] (bus_add_driver+0x190/0x250) from [<c03a8cf8>] (driver_register+0x78/0x13c) [ 5.238433] [<c03a8cf8>] (driver_register+0x78/0x13c) from [<c0428040>] (usb_register_driver+0x78/0x13c) [ 5.238464] [<c0428040>] (usb_register_driver+0x78/0x13c) from [<c005b680>] (do_one_initcall+0x34/0x188) [ 5.238494] [<c005b680>] (do_one_initcall+0x34/0x188) from [<c00e11f0>] (sys_init_module+0xb0/0x1c0) [ 5.238525] [<c00e11f0>] (sys_init_module+0xb0/0x1c0) from [<c0065c40>] (ret_fast_syscall+0x0/0x30) Move the two offenders to the private structure which is kmalloc-ed, and thus safe. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-18 11:53:58 +08:00
pdata->hash_hi, pdata->hash_lo);
} else {
netif_dbg(dev, drv, dev->net, "receive own packets only\n");
pdata->mac_cr &=
~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
}
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
/* Initiate async writes, as we can't wait for completion here */
ret = smsc95xx_write_reg_async(dev, HASHH, pdata->hash_hi);
if (ret < 0)
netdev_warn(dev->net, "failed to initiate async write to HASHH\n");
ret = smsc95xx_write_reg_async(dev, HASHL, pdata->hash_lo);
if (ret < 0)
netdev_warn(dev->net, "failed to initiate async write to HASHL\n");
ret = smsc95xx_write_reg_async(dev, MAC_CR, pdata->mac_cr);
if (ret < 0)
netdev_warn(dev->net, "failed to initiate async write to MAC_CR\n");
}
static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
u16 lcladv, u16 rmtadv)
{
u32 flow, afc_cfg = 0;
int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
if (ret < 0)
return ret;
if (duplex == DUPLEX_FULL) {
u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
if (cap & FLOW_CTRL_RX)
flow = 0xFFFF0002;
else
flow = 0;
if (cap & FLOW_CTRL_TX)
afc_cfg |= 0xF;
else
afc_cfg &= ~0xF;
netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
cap & FLOW_CTRL_RX ? "enabled" : "disabled",
cap & FLOW_CTRL_TX ? "enabled" : "disabled");
} else {
netif_dbg(dev, link, dev->net, "half duplex\n");
flow = 0;
afc_cfg |= 0xF;
}
ret = smsc95xx_write_reg(dev, FLOW, flow);
if (ret < 0)
return ret;
return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
}
static int smsc95xx_link_reset(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
struct mii_if_info *mii = &dev->mii;
struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
unsigned long flags;
u16 lcladv, rmtadv;
int ret;
/* clear interrupt status */
ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
if (ret < 0)
return ret;
ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
if (ret < 0)
return ret;
mii_check_media(mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
lcladv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
rmtadv = smsc95xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
netif_dbg(dev, link, dev->net,
"speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
if (ecmd.duplex != DUPLEX_FULL) {
pdata->mac_cr &= ~MAC_CR_FDPX_;
pdata->mac_cr |= MAC_CR_RCVOWN_;
} else {
pdata->mac_cr &= ~MAC_CR_RCVOWN_;
pdata->mac_cr |= MAC_CR_FDPX_;
}
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
if (ret < 0)
return ret;
ret = smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
if (ret < 0)
netdev_warn(dev->net, "Error updating PHY flow control\n");
return ret;
}
static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
{
u32 intdata;
if (urb->actual_length != 4) {
netdev_warn(dev->net, "unexpected urb length %d\n",
urb->actual_length);
return;
}
memcpy(&intdata, urb->transfer_buffer, 4);
le32_to_cpus(&intdata);
netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
if (intdata & INT_ENP_PHY_INT_)
usbnet_defer_kevent(dev, EVENT_LINK_RESET);
else
netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
intdata);
}
static void set_carrier(struct usbnet *dev, bool link)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
if (pdata->link_ok == link)
return;
pdata->link_ok = link;
if (link)
usbnet_link_change(dev, 1, 0);
else
usbnet_link_change(dev, 0, 0);
}
static void check_carrier(struct work_struct *work)
{
struct smsc95xx_priv *pdata = container_of(work, struct smsc95xx_priv,
carrier_check.work);
struct usbnet *dev = pdata->dev;
int ret;
if (pdata->suspend_flags != 0)
return;
ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMSR);
if (ret < 0) {
netdev_warn(dev->net, "Failed to read MII_BMSR\n");
return;
}
if (ret & BMSR_LSTATUS)
set_carrier(dev, 1);
else
set_carrier(dev, 0);
schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
}
/* Enable or disable Tx & Rx checksum offload engines */
static int smsc95xx_set_features(struct net_device *netdev,
netdev_features_t features)
{
struct usbnet *dev = netdev_priv(netdev);
u32 read_buf;
int ret;
ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
if (ret < 0)
return ret;
if (features & NETIF_F_HW_CSUM)
read_buf |= Tx_COE_EN_;
else
read_buf &= ~Tx_COE_EN_;
if (features & NETIF_F_RXCSUM)
read_buf |= Rx_COE_EN_;
else
read_buf &= ~Rx_COE_EN_;
ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
return 0;
}
static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net)
{
return MAX_EEPROM_SIZE;
}
static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *ee, u8 *data)
{
struct usbnet *dev = netdev_priv(netdev);
ee->magic = LAN95XX_EEPROM_MAGIC;
return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data);
}
static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *ee, u8 *data)
{
struct usbnet *dev = netdev_priv(netdev);
if (ee->magic != LAN95XX_EEPROM_MAGIC) {
netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
ee->magic);
return -EINVAL;
}
return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
}
static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
{
/* all smsc95xx registers */
return COE_CR - ID_REV + sizeof(u32);
}
static void
smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
void *buf)
{
struct usbnet *dev = netdev_priv(netdev);
unsigned int i, j;
int retval;
u32 *data = buf;
retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
if (retval < 0) {
netdev_warn(netdev, "REGS: cannot read ID_REV\n");
return;
}
for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
retval = smsc95xx_read_reg(dev, i, &data[j]);
if (retval < 0) {
netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
return;
}
}
}
static void smsc95xx_ethtool_get_wol(struct net_device *net,
struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
wolinfo->supported = SUPPORTED_WAKE;
wolinfo->wolopts = pdata->wolopts;
}
static int smsc95xx_ethtool_set_wol(struct net_device *net,
struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int ret;
pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
if (ret < 0)
netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
return ret;
}
static int get_mdix_status(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
u32 val;
int buf;
buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, SPECIAL_CTRL_STS);
if (buf & SPECIAL_CTRL_STS_OVRRD_AMDIX_) {
if (buf & SPECIAL_CTRL_STS_AMDIX_ENABLE_)
return ETH_TP_MDI_AUTO;
else if (buf & SPECIAL_CTRL_STS_AMDIX_STATE_)
return ETH_TP_MDI_X;
} else {
buf = smsc95xx_read_reg(dev, STRAP_STATUS, &val);
if (val & STRAP_STATUS_AMDIX_EN_)
return ETH_TP_MDI_AUTO;
}
return ETH_TP_MDI;
}
static void set_mdix_status(struct net_device *net, __u8 mdix_ctrl)
{
struct usbnet *dev = netdev_priv(net);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int buf;
if ((pdata->chip_id == ID_REV_CHIP_ID_9500A_) ||
(pdata->chip_id == ID_REV_CHIP_ID_9530_) ||
(pdata->chip_id == ID_REV_CHIP_ID_89530_) ||
(pdata->chip_id == ID_REV_CHIP_ID_9730_)) {
/* Extend Manual AutoMDIX timer for 9500A/9500Ai */
buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
PHY_EDPD_CONFIG);
buf |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
PHY_EDPD_CONFIG, buf);
}
if (mdix_ctrl == ETH_TP_MDI) {
buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS);
buf |= SPECIAL_CTRL_STS_OVRRD_AMDIX_;
buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
SPECIAL_CTRL_STS_AMDIX_STATE_);
smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS, buf);
} else if (mdix_ctrl == ETH_TP_MDI_X) {
buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS);
buf |= SPECIAL_CTRL_STS_OVRRD_AMDIX_;
buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
SPECIAL_CTRL_STS_AMDIX_STATE_);
buf |= SPECIAL_CTRL_STS_AMDIX_STATE_;
smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS, buf);
} else if (mdix_ctrl == ETH_TP_MDI_AUTO) {
buf = smsc95xx_mdio_read(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS);
buf &= ~SPECIAL_CTRL_STS_OVRRD_AMDIX_;
buf &= ~(SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
SPECIAL_CTRL_STS_AMDIX_STATE_);
buf |= SPECIAL_CTRL_STS_AMDIX_ENABLE_;
smsc95xx_mdio_write(dev->net, dev->mii.phy_id,
SPECIAL_CTRL_STS, buf);
}
pdata->mdix_ctrl = mdix_ctrl;
}
static int smsc95xx_get_settings(struct net_device *net,
struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int retval;
retval = usbnet_get_settings(net, cmd);
cmd->eth_tp_mdix = pdata->mdix_ctrl;
cmd->eth_tp_mdix_ctrl = pdata->mdix_ctrl;
return retval;
}
static int smsc95xx_set_settings(struct net_device *net,
struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int retval;
if (pdata->mdix_ctrl != cmd->eth_tp_mdix_ctrl)
set_mdix_status(net, cmd->eth_tp_mdix_ctrl);
retval = usbnet_set_settings(net, cmd);
return retval;
}
static const struct ethtool_ops smsc95xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
.get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_settings = smsc95xx_get_settings,
.set_settings = smsc95xx_set_settings,
.get_eeprom_len = smsc95xx_ethtool_get_eeprom_len,
.get_eeprom = smsc95xx_ethtool_get_eeprom,
.set_eeprom = smsc95xx_ethtool_set_eeprom,
.get_regs_len = smsc95xx_ethtool_getregslen,
.get_regs = smsc95xx_ethtool_getregs,
.get_wol = smsc95xx_ethtool_get_wol,
.set_wol = smsc95xx_ethtool_set_wol,
};
static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
{
struct usbnet *dev = netdev_priv(netdev);
if (!netif_running(netdev))
return -EINVAL;
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
static void smsc95xx_init_mac_address(struct usbnet *dev)
{
const u8 *mac_addr;
/* maybe the boot loader passed the MAC address in devicetree */
mac_addr = of_get_mac_address(dev->udev->dev.of_node);
if (mac_addr) {
memcpy(dev->net->dev_addr, mac_addr, ETH_ALEN);
return;
}
/* try reading mac address from EEPROM */
if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
dev->net->dev_addr) == 0) {
if (is_valid_ether_addr(dev->net->dev_addr)) {
/* eeprom values are valid so use them */
netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
return;
}
}
/* no useful static MAC address found. generate a random one */
eth_hw_addr_random(dev->net);
netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}
static int smsc95xx_set_mac_address(struct usbnet *dev)
{
u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
int ret;
ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
if (ret < 0)
return ret;
return smsc95xx_write_reg(dev, ADDRH, addr_hi);
}
/* starts the TX path */
static int smsc95xx_start_tx_path(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
int ret;
/* Enable Tx at MAC */
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
pdata->mac_cr |= MAC_CR_TXEN_;
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
if (ret < 0)
return ret;
/* Enable Tx at SCSRs */
return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
}
/* Starts the Receive path */
static int smsc95xx_start_rx_path(struct usbnet *dev, int in_pm)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
pdata->mac_cr |= MAC_CR_RXEN_;
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
return __smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr, in_pm);
}
static int smsc95xx_phy_initialize(struct usbnet *dev)
{
int bmcr, ret, timeout = 0;
/* Initialize MII structure */
dev->mii.dev = dev->net;
dev->mii.mdio_read = smsc95xx_mdio_read;
dev->mii.mdio_write = smsc95xx_mdio_write;
dev->mii.phy_id_mask = 0x1f;
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID;
/* reset phy and wait for reset to complete */
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
do {
msleep(10);
bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
timeout++;
} while ((bmcr & BMCR_RESET) && (timeout < 100));
if (timeout >= 100) {
netdev_warn(dev->net, "timeout on PHY Reset");
return -EIO;
}
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
/* read to clear */
ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
if (ret < 0) {
netdev_warn(dev->net, "Failed to read PHY_INT_SRC during init\n");
return ret;
}
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
PHY_INT_MASK_DEFAULT_);
mii_nway_restart(&dev->mii);
netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
return 0;
}
static int smsc95xx_reset(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 read_buf, write_buf, burst_cap;
int ret = 0, timeout;
netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
if (ret < 0)
return ret;
timeout = 0;
do {
msleep(10);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0)
return ret;
timeout++;
} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
if (timeout >= 100) {
netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
return ret;
}
ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_);
if (ret < 0)
return ret;
timeout = 0;
do {
msleep(10);
ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
if (ret < 0)
return ret;
timeout++;
} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
if (timeout >= 100) {
netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
return ret;
}
ret = smsc95xx_set_mac_address(dev);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
dev->net->dev_addr);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
read_buf);
read_buf |= HW_CFG_BIR_;
ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
read_buf);
if (!turbo_mode) {
burst_cap = 0;
dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
} else if (dev->udev->speed == USB_SPEED_HIGH) {
burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
} else {
burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
}
netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
(ulong)dev->rx_urb_size);
ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net,
"Read Value from BURST_CAP after writing: 0x%08x\n",
read_buf);
ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net,
"Read Value from BULK_IN_DLY after writing: 0x%08x\n",
read_buf);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
read_buf);
if (turbo_mode)
read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
read_buf &= ~HW_CFG_RXDOFF_;
/* set Rx data offset=2, Make IP header aligns on word boundary. */
read_buf |= NET_IP_ALIGN << 9;
ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
if (ret < 0)
return ret;
ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
if (ret < 0)
return ret;
netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
/* Configure GPIO pins as LED outputs */
write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
LED_GPIO_CFG_FDX_LED;
ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
if (ret < 0)
return ret;
/* Init Tx */
ret = smsc95xx_write_reg(dev, FLOW, 0);
if (ret < 0)
return ret;
ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
if (ret < 0)
return ret;
/* Don't need mac_cr_lock during initialisation */
ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
if (ret < 0)
return ret;
/* Init Rx */
/* Set Vlan */
ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
if (ret < 0)
return ret;
/* Enable or disable checksum offload engines */
ret = smsc95xx_set_features(dev->net, dev->net->features);
if (ret < 0) {
netdev_warn(dev->net, "Failed to set checksum offload features\n");
return ret;
}
smsc95xx_set_multicast(dev->net);
ret = smsc95xx_phy_initialize(dev);
if (ret < 0) {
netdev_warn(dev->net, "Failed to init PHY\n");
return ret;
}
ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
if (ret < 0)
return ret;
/* enable PHY interrupts */
read_buf |= INT_EP_CTL_PHY_INT_;
ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
if (ret < 0)
return ret;
ret = smsc95xx_start_tx_path(dev);
if (ret < 0) {
netdev_warn(dev->net, "Failed to start TX path\n");
return ret;
}
ret = smsc95xx_start_rx_path(dev, 0);
if (ret < 0) {
netdev_warn(dev->net, "Failed to start RX path\n");
return ret;
}
netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
return 0;
}
static const struct net_device_ops smsc95xx_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_do_ioctl = smsc95xx_ioctl,
.ndo_set_rx_mode = smsc95xx_set_multicast,
.ndo_set_features = smsc95xx_set_features,
};
static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
{
struct smsc95xx_priv *pdata = NULL;
u32 val;
int ret;
printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
ret = usbnet_get_endpoints(dev, intf);
if (ret < 0) {
netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
return ret;
}
dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv),
GFP_KERNEL);
pdata = (struct smsc95xx_priv *)(dev->data[0]);
if (!pdata)
return -ENOMEM;
spin_lock_init(&pdata->mac_cr_lock);
if (DEFAULT_TX_CSUM_ENABLE)
dev->net->features |= NETIF_F_HW_CSUM;
if (DEFAULT_RX_CSUM_ENABLE)
dev->net->features |= NETIF_F_RXCSUM;
dev->net->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
smsc95xx_init_mac_address(dev);
/* Init all registers */
ret = smsc95xx_reset(dev);
/* detect device revision as different features may be available */
ret = smsc95xx_read_reg(dev, ID_REV, &val);
if (ret < 0)
return ret;
val >>= 16;
pdata->chip_id = val;
pdata->mdix_ctrl = get_mdix_status(dev->net);
if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||
(val == ID_REV_CHIP_ID_89530_) || (val == ID_REV_CHIP_ID_9730_))
pdata->features = (FEATURE_8_WAKEUP_FILTERS |
FEATURE_PHY_NLP_CROSSOVER |
FEATURE_REMOTE_WAKEUP);
else if (val == ID_REV_CHIP_ID_9512_)
pdata->features = FEATURE_8_WAKEUP_FILTERS;
dev->net->netdev_ops = &smsc95xx_netdev_ops;
dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
dev->net->flags |= IFF_MULTICAST;
dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
pdata->dev = dev;
INIT_DELAYED_WORK(&pdata->carrier_check, check_carrier);
schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
return 0;
}
static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
if (pdata) {
cancel_delayed_work(&pdata->carrier_check);
netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
pdata = NULL;
dev->data[0] = 0;
}
}
static u32 smsc_crc(const u8 *buffer, size_t len, int filter)
{
u32 crc = bitrev16(crc16(0xFFFF, buffer, len));
return crc << ((filter % 2) * 16);
}
static int smsc95xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
{
struct mii_if_info *mii = &dev->mii;
int ret;
netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
/* read to clear */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
if (ret < 0)
return ret;
/* enable interrupt source */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
if (ret < 0)
return ret;
ret |= mask;
smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
return 0;
}
static int smsc95xx_link_ok_nopm(struct usbnet *dev)
{
struct mii_if_info *mii = &dev->mii;
int ret;
/* first, a dummy read, needed to latch some MII phys */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
if (ret < 0)
return ret;
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
if (ret < 0)
return ret;
return !!(ret & BMSR_LSTATUS);
}
static int smsc95xx_enter_suspend0(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val;
int ret;
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
val |= PM_CTL_SUS_MODE_0;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
/* clear wol status */
val &= ~PM_CTL_WUPS_;
val |= PM_CTL_WUPS_WOL_;
/* enable energy detection */
if (pdata->wolopts & WAKE_PHY)
val |= PM_CTL_WUPS_ED_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
/* read back PM_CTRL */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
pdata->suspend_flags |= SUSPEND_SUSPEND0;
return 0;
}
static int smsc95xx_enter_suspend1(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
struct mii_if_info *mii = &dev->mii;
u32 val;
int ret;
/* reconfigure link pulse detection timing for
* compatibility with non-standard link partners
*/
if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_EDPD_CONFIG,
PHY_EDPD_CONFIG_DEFAULT);
/* enable energy detect power-down mode */
ret = smsc95xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS);
if (ret < 0)
return ret;
ret |= MODE_CTRL_STS_EDPWRDOWN_;
smsc95xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_MODE_CTRL_STS, ret);
/* enter SUSPEND1 mode */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_1;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
/* clear wol status, enable energy detection */
val &= ~PM_CTL_WUPS_;
val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
pdata->suspend_flags |= SUSPEND_SUSPEND1;
return 0;
}
static int smsc95xx_enter_suspend2(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val;
int ret;
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_2;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
pdata->suspend_flags |= SUSPEND_SUSPEND2;
return 0;
}
static int smsc95xx_enter_suspend3(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val;
int ret;
ret = smsc95xx_read_reg_nopm(dev, RX_FIFO_INF, &val);
if (ret < 0)
return ret;
if (val & 0xFFFF) {
netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
return -EBUSY;
}
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
/* clear wol status */
val &= ~PM_CTL_WUPS_;
val |= PM_CTL_WUPS_WOL_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
pdata->suspend_flags |= SUSPEND_SUSPEND3;
return 0;
}
static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
int ret;
if (!netif_running(dev->net)) {
/* interface is ifconfig down so fully power down hw */
netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
return smsc95xx_enter_suspend2(dev);
}
if (!link_up) {
/* link is down so enter EDPD mode, but only if device can
* reliably resume from it. This check should be redundant
* as current FEATURE_REMOTE_WAKEUP parts also support
* FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
netdev_warn(dev->net, "EDPD not supported\n");
return -EBUSY;
}
netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
/* enable PHY wakeup events for if cable is attached */
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
PHY_INT_MASK_ANEG_COMP_);
if (ret < 0) {
netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
return ret;
}
netdev_info(dev->net, "entering SUSPEND1 mode\n");
return smsc95xx_enter_suspend1(dev);
}
/* enable PHY wakeup events so we remote wakeup if cable is pulled */
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
PHY_INT_MASK_LINK_DOWN_);
if (ret < 0) {
netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
return ret;
}
netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
return smsc95xx_enter_suspend3(dev);
}
static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 val, link_up;
int ret;
ret = usbnet_suspend(intf, message);
if (ret < 0) {
netdev_warn(dev->net, "usbnet_suspend error\n");
return ret;
}
if (pdata->suspend_flags) {
netdev_warn(dev->net, "error during last resume\n");
pdata->suspend_flags = 0;
}
/* determine if link is up using only _nopm functions */
link_up = smsc95xx_link_ok_nopm(dev);
if (message.event == PM_EVENT_AUTO_SUSPEND &&
(pdata->features & FEATURE_REMOTE_WAKEUP)) {
ret = smsc95xx_autosuspend(dev, link_up);
goto done;
}
/* if we get this far we're not autosuspending */
/* if no wol options set, or if link is down and we're not waking on
* PHY activity, enter lowest power SUSPEND2 mode
*/
if (!(pdata->wolopts & SUPPORTED_WAKE) ||
!(link_up || (pdata->wolopts & WAKE_PHY))) {
netdev_info(dev->net, "entering SUSPEND2 mode\n");
/* disable energy detect (link up) & wake up events */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
goto done;
val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
if (ret < 0)
goto done;
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
goto done;
val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
goto done;
ret = smsc95xx_enter_suspend2(dev);
goto done;
}
if (pdata->wolopts & WAKE_PHY) {
ret = smsc95xx_enable_phy_wakeup_interrupts(dev,
(PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_LINK_DOWN_));
if (ret < 0) {
netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
goto done;
}
/* if link is down then configure EDPD and enter SUSPEND1,
* otherwise enter SUSPEND0 below
*/
if (!link_up) {
netdev_info(dev->net, "entering SUSPEND1 mode\n");
ret = smsc95xx_enter_suspend1(dev);
goto done;
}
}
if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
u32 *filter_mask = kzalloc(sizeof(u32) * 32, GFP_KERNEL);
u32 command[2];
u32 offset[2];
u32 crc[4];
int wuff_filter_count =
(pdata->features & FEATURE_8_WAKEUP_FILTERS) ?
LAN9500A_WUFF_NUM : LAN9500_WUFF_NUM;
int i, filter = 0;
if (!filter_mask) {
netdev_warn(dev->net, "Unable to allocate filter_mask\n");
ret = -ENOMEM;
goto done;
}
memset(command, 0, sizeof(command));
memset(offset, 0, sizeof(offset));
memset(crc, 0, sizeof(crc));
if (pdata->wolopts & WAKE_BCAST) {
const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
netdev_info(dev->net, "enabling broadcast detection\n");
filter_mask[filter * 4] = 0x003F;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
filter_mask[filter * 4 + 3] = 0x00;
command[filter/4] |= 0x05UL << ((filter % 4) * 8);
offset[filter/4] |= 0x00 << ((filter % 4) * 8);
crc[filter/2] |= smsc_crc(bcast, 6, filter);
filter++;
}
if (pdata->wolopts & WAKE_MCAST) {
const u8 mcast[] = {0x01, 0x00, 0x5E};
netdev_info(dev->net, "enabling multicast detection\n");
filter_mask[filter * 4] = 0x0007;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
filter_mask[filter * 4 + 3] = 0x00;
command[filter/4] |= 0x09UL << ((filter % 4) * 8);
offset[filter/4] |= 0x00 << ((filter % 4) * 8);
crc[filter/2] |= smsc_crc(mcast, 3, filter);
filter++;
}
if (pdata->wolopts & WAKE_ARP) {
const u8 arp[] = {0x08, 0x06};
netdev_info(dev->net, "enabling ARP detection\n");
filter_mask[filter * 4] = 0x0003;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
filter_mask[filter * 4 + 3] = 0x00;
command[filter/4] |= 0x05UL << ((filter % 4) * 8);
offset[filter/4] |= 0x0C << ((filter % 4) * 8);
crc[filter/2] |= smsc_crc(arp, 2, filter);
filter++;
}
if (pdata->wolopts & WAKE_UCAST) {
netdev_info(dev->net, "enabling unicast detection\n");
filter_mask[filter * 4] = 0x003F;
filter_mask[filter * 4 + 1] = 0x00;
filter_mask[filter * 4 + 2] = 0x00;
filter_mask[filter * 4 + 3] = 0x00;
command[filter/4] |= 0x01UL << ((filter % 4) * 8);
offset[filter/4] |= 0x00 << ((filter % 4) * 8);
crc[filter/2] |= smsc_crc(dev->net->dev_addr, ETH_ALEN, filter);
filter++;
}
for (i = 0; i < (wuff_filter_count * 4); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, filter_mask[i]);
if (ret < 0) {
kfree(filter_mask);
goto done;
}
}
kfree(filter_mask);
for (i = 0; i < (wuff_filter_count / 4); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, command[i]);
if (ret < 0)
goto done;
}
for (i = 0; i < (wuff_filter_count / 4); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, offset[i]);
if (ret < 0)
goto done;
}
for (i = 0; i < (wuff_filter_count / 2); i++) {
ret = smsc95xx_write_reg_nopm(dev, WUFF, crc[i]);
if (ret < 0)
goto done;
}
/* clear any pending pattern match packet status */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
goto done;
val |= WUCSR_WUFR_;
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
if (ret < 0)
goto done;
}
if (pdata->wolopts & WAKE_MAGIC) {
/* clear any pending magic packet status */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
goto done;
val |= WUCSR_MPR_;
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
if (ret < 0)
goto done;
}
/* enable/disable wakeup sources */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
goto done;
if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
netdev_info(dev->net, "enabling pattern match wakeup\n");
val |= WUCSR_WAKE_EN_;
} else {
netdev_info(dev->net, "disabling pattern match wakeup\n");
val &= ~WUCSR_WAKE_EN_;
}
if (pdata->wolopts & WAKE_MAGIC) {
netdev_info(dev->net, "enabling magic packet wakeup\n");
val |= WUCSR_MPEN_;
} else {
netdev_info(dev->net, "disabling magic packet wakeup\n");
val &= ~WUCSR_MPEN_;
}
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
if (ret < 0)
goto done;
/* enable wol wakeup source */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
goto done;
val |= PM_CTL_WOL_EN_;
/* phy energy detect wakeup source */
if (pdata->wolopts & WAKE_PHY)
val |= PM_CTL_ED_EN_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
goto done;
/* enable receiver to enable frame reception */
smsc95xx_start_rx_path(dev, 1);
/* some wol options are enabled, so enter SUSPEND0 */
netdev_info(dev->net, "entering SUSPEND0 mode\n");
ret = smsc95xx_enter_suspend0(dev);
done:
/*
* TODO: resume() might need to handle the suspend failure
* in system sleep
*/
if (ret && PMSG_IS_AUTO(message))
usbnet_resume(intf);
return ret;
}
static int smsc95xx_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct smsc95xx_priv *pdata;
u8 suspend_flags;
int ret;
u32 val;
BUG_ON(!dev);
pdata = (struct smsc95xx_priv *)(dev->data[0]);
suspend_flags = pdata->suspend_flags;
netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
/* do this first to ensure it's cleared even in error case */
pdata->suspend_flags = 0;
schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
if (suspend_flags & SUSPEND_ALLMODES) {
/* clear wake-up sources */
ret = smsc95xx_read_reg_nopm(dev, WUCSR, &val);
if (ret < 0)
return ret;
val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
ret = smsc95xx_write_reg_nopm(dev, WUCSR, val);
if (ret < 0)
return ret;
/* clear wake-up status */
ret = smsc95xx_read_reg_nopm(dev, PM_CTRL, &val);
if (ret < 0)
return ret;
val &= ~PM_CTL_WOL_EN_;
val |= PM_CTL_WUPS_;
ret = smsc95xx_write_reg_nopm(dev, PM_CTRL, val);
if (ret < 0)
return ret;
}
ret = usbnet_resume(intf);
if (ret < 0)
netdev_warn(dev->net, "usbnet_resume error\n");
return ret;
}
static int smsc95xx_reset_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
int ret;
ret = smsc95xx_reset(dev);
if (ret < 0)
return ret;
return smsc95xx_resume(intf);
}
static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
{
skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
skb->ip_summed = CHECKSUM_COMPLETE;
skb_trim(skb, skb->len - 2);
}
static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
usbnet: remove generic hard_header_len check This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 00:50:19 +08:00
/* This check is no longer done by usbnet */
if (skb->len < dev->net->hard_header_len)
return 0;
while (skb->len > 0) {
u32 header, align_count;
struct sk_buff *ax_skb;
unsigned char *packet;
u16 size;
memcpy(&header, skb->data, sizeof(header));
le32_to_cpus(&header);
skb_pull(skb, 4 + NET_IP_ALIGN);
packet = skb->data;
/* get the packet length */
size = (u16)((header & RX_STS_FL_) >> 16);
align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
if (unlikely(header & RX_STS_ES_)) {
netif_dbg(dev, rx_err, dev->net,
"Error header=0x%08x\n", header);
dev->net->stats.rx_errors++;
dev->net->stats.rx_dropped++;
if (header & RX_STS_CRC_) {
dev->net->stats.rx_crc_errors++;
} else {
if (header & (RX_STS_TL_ | RX_STS_RF_))
dev->net->stats.rx_frame_errors++;
if ((header & RX_STS_LE_) &&
(!(header & RX_STS_FT_)))
dev->net->stats.rx_length_errors++;
}
} else {
/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
if (unlikely(size > (ETH_FRAME_LEN + 12))) {
netif_dbg(dev, rx_err, dev->net,
"size err header=0x%08x\n", header);
return 0;
}
/* last frame in this batch */
if (skb->len == size) {
if (dev->net->features & NETIF_F_RXCSUM)
smsc95xx_rx_csum_offload(skb);
skb_trim(skb, skb->len - 4); /* remove fcs */
skb->truesize = size + sizeof(struct sk_buff);
return 1;
}
ax_skb = skb_clone(skb, GFP_ATOMIC);
if (unlikely(!ax_skb)) {
netdev_warn(dev->net, "Error allocating skb\n");
return 0;
}
ax_skb->len = size;
ax_skb->data = packet;
skb_set_tail_pointer(ax_skb, size);
if (dev->net->features & NETIF_F_RXCSUM)
smsc95xx_rx_csum_offload(ax_skb);
skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
ax_skb->truesize = size + sizeof(struct sk_buff);
usbnet_skb_return(dev, ax_skb);
}
skb_pull(skb, size);
/* padding bytes before the next frame starts */
if (skb->len)
skb_pull(skb, align_count);
}
return 1;
}
static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
{
u16 low_16 = (u16)skb_checksum_start_offset(skb);
u16 high_16 = low_16 + skb->csum_offset;
return (high_16 << 16) | low_16;
}
static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
struct sk_buff *skb, gfp_t flags)
{
bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
u32 tx_cmd_a, tx_cmd_b;
/* We do not advertise SG, so skbs should be already linearized */
BUG_ON(skb_shinfo(skb)->nr_frags);
if (skb_headroom(skb) < overhead) {
struct sk_buff *skb2 = skb_copy_expand(skb,
overhead, 0, flags);
dev_kfree_skb_any(skb);
skb = skb2;
if (!skb)
return NULL;
}
if (csum) {
if (skb->len <= 45) {
/* workaround - hardware tx checksum does not work
* properly with extremely small packets */
long csstart = skb_checksum_start_offset(skb);
__wsum calc = csum_partial(skb->data + csstart,
skb->len - csstart, 0);
*((__sum16 *)(skb->data + csstart
+ skb->csum_offset)) = csum_fold(calc);
csum = false;
} else {
u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
skb_push(skb, 4);
cpu_to_le32s(&csum_preamble);
memcpy(skb->data, &csum_preamble, 4);
}
}
skb_push(skb, 4);
tx_cmd_b = (u32)(skb->len - 4);
if (csum)
tx_cmd_b |= TX_CMD_B_CSUM_ENABLE;
cpu_to_le32s(&tx_cmd_b);
memcpy(skb->data, &tx_cmd_b, 4);
skb_push(skb, 4);
tx_cmd_a = (u32)(skb->len - 8) | TX_CMD_A_FIRST_SEG_ |
TX_CMD_A_LAST_SEG_;
cpu_to_le32s(&tx_cmd_a);
memcpy(skb->data, &tx_cmd_a, 4);
return skb;
}
static int smsc95xx_manage_power(struct usbnet *dev, int on)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
dev->intf->needs_remote_wakeup = on;
if (pdata->features & FEATURE_REMOTE_WAKEUP)
return 0;
/* this chip revision isn't capable of remote wakeup */
netdev_info(dev->net, "hardware isn't capable of remote wakeup\n");
if (on)
usb_autopm_get_interface_no_resume(dev->intf);
else
usb_autopm_put_interface(dev->intf);
return 0;
}
static const struct driver_info smsc95xx_info = {
.description = "smsc95xx USB 2.0 Ethernet",
.bind = smsc95xx_bind,
.unbind = smsc95xx_unbind,
.link_reset = smsc95xx_link_reset,
.reset = smsc95xx_reset,
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
.manage_power = smsc95xx_manage_power,
.flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
};
static const struct usb_device_id products[] = {
{
/* SMSC9500 USB Ethernet Device */
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505 USB Ethernet Device */
USB_DEVICE(0x0424, 0x9505),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device */
USB_DEVICE(0x0424, 0x9E00),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device */
USB_DEVICE(0x0424, 0x9E01),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device */
USB_DEVICE(0x0424, 0xec00),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500 USB Ethernet Device (SAL10) */
USB_DEVICE(0x0424, 0x9900),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505 USB Ethernet Device (SAL10) */
USB_DEVICE(0x0424, 0x9901),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (SAL10) */
USB_DEVICE(0x0424, 0x9902),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device (SAL10) */
USB_DEVICE(0x0424, 0x9903),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
USB_DEVICE(0x0424, 0x9904),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (HAL) */
USB_DEVICE(0x0424, 0x9905),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device (HAL) */
USB_DEVICE(0x0424, 0x9906),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500 USB Ethernet Device (Alternate ID) */
USB_DEVICE(0x0424, 0x9907),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (Alternate ID) */
USB_DEVICE(0x0424, 0x9908),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
USB_DEVICE(0x0424, 0x9909),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC LAN9530 USB Ethernet Device */
USB_DEVICE(0x0424, 0x9530),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC LAN9730 USB Ethernet Device */
USB_DEVICE(0x0424, 0x9730),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC LAN89530 USB Ethernet Device */
USB_DEVICE(0x0424, 0x9E08),
.driver_info = (unsigned long) &smsc95xx_info,
},
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver smsc95xx_driver = {
.name = "smsc95xx",
.id_table = products,
.probe = usbnet_probe,
.suspend = smsc95xx_suspend,
.resume = smsc95xx_resume,
.reset_resume = smsc95xx_reset_resume,
.disconnect = usbnet_disconnect,
USB: Disable hub-initiated LPM for comms devices. Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-24 01:08:51 +08:00
.disable_hub_initiated_lpm = 1,
.supports_autosuspend = 1,
};
module_usb_driver(smsc95xx_driver);
MODULE_AUTHOR("Nancy Lin");
MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
MODULE_LICENSE("GPL");