linux-sg2042/arch/arm/mach-omap2/opp4xxx_data.c

106 lines
3.7 KiB
C
Raw Normal View History

/*
* OMAP4 OPP table definitions.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Thara Gopinath
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
* Copyright (C) 2010-2011 Nokia Corporation.
* Eduardo Valentin
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <plat/cpu.h>
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
#include "control.h"
#include "omap_opp_data.h"
#include "pm.h"
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
/*
* Structures containing OMAP4430 voltage supported and various
* voltage dependent data for each VDD.
*/
#define OMAP4430_VDD_MPU_OPP50_UV 1025000
#define OMAP4430_VDD_MPU_OPP100_UV 1200000
#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000
#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4430_VDD_IVA_OPP50_UV 1013000
#define OMAP4430_VDD_IVA_OPP100_UV 1188000
#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4430_VDD_CORE_OPP50_UV 1025000
#define OMAP4430_VDD_CORE_OPP100_UV 1200000
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
/* MPU OPP1 - OPP50 */
OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV),
/* MPU OPP2 - OPP100 */
OPP_INITIALIZER("mpu", true, 600000000, OMAP4430_VDD_MPU_OPP100_UV),
/* MPU OPP3 - OPP-Turbo */
OPP_INITIALIZER("mpu", true, 800000000, OMAP4430_VDD_MPU_OPPTURBO_UV),
/* MPU OPP4 - OPP-SB */
OPP_INITIALIZER("mpu", true, 1008000000, OMAP4430_VDD_MPU_OPPNITRO_UV),
/* L3 OPP1 - OPP50 */
OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4430_VDD_CORE_OPP50_UV),
/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4430_VDD_CORE_OPP100_UV),
/* IVA OPP1 - OPP50 */
OPP_INITIALIZER("iva", true, 133000000, OMAP4430_VDD_IVA_OPP50_UV),
/* IVA OPP2 - OPP100 */
OPP_INITIALIZER("iva", true, 266100000, OMAP4430_VDD_IVA_OPP100_UV),
/* IVA OPP3 - OPP-Turbo */
OPP_INITIALIZER("iva", false, 332000000, OMAP4430_VDD_IVA_OPPTURBO_UV),
/* TODO: add DSP, aess, fdif, gpu */
};
/**
* omap4_opp_init() - initialize omap4 opp table
*/
int __init omap4_opp_init(void)
{
int r = -ENODEV;
if (!cpu_is_omap44xx())
return r;
r = omap_init_opp_table(omap44xx_opp_def_list,
ARRAY_SIZE(omap44xx_opp_def_list));
return r;
}
device_initcall(omap4_opp_init);