hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/configs/omap2plus_defconfig

381 lines
8.7 KiB
Plaintext
Raw Normal View History

arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
omap3: update omap3_defconfig - Update the omap3_defconfig to sync up with the generated .config - Increase CONFIG_LOG_BUF_SHIFT to 16 to allow the entire boot log to be captured (useful when using boot time tracer, for example) Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-13 13:32:27 +08:00
CONFIG_LOG_BUF_SHIFT=16
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BLK_DEV_INITRD=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 06:44:16 +08:00
CONFIG_EXPERT=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_PARTITION_ADVANCED=y
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-17 02:25:07 +08:00
CONFIG_ARCH_MULTI_V6=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_POWER_AVS_OMAP=y
CONFIG_POWER_AVS_OMAP_CLASS3=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 06:02:26 +08:00
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SOC_OMAP5=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 06:02:26 +08:00
CONFIG_SOC_AM33XX=y
ARM: OMAP2+: AM43x: enable in default config Enable AM43x SoC in omap2plus_defconfig Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-07 18:21:23 +08:00
CONFIG_SOC_AM43XX=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SOC_DRA7XX=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_ARM_THUMBEE=y
omap: Update omap3_defconfig for omap2 We need to enable ARM_ERRATA_411920 for omap2 and remove the omap2 specific defconfigs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 05:53:38 +08:00
CONFIG_ARM_ERRATA_411920=y
ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 Somehow we don't have this set in omap2plus_defconfig. Without this apps can segfault randomly on omap3. I can reproduce this easily on am37xx-evm by doing apt-get update over NFSroot. Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-10 02:28:34 +08:00
CONFIG_ARM_ERRATA_430973=y
omap: Update omap3_defconfig to work with SMP_ON_UP With the recent changes to core ARM kernel code, we can now boot SMP kernel on UP systems. Update omap3_defconfig to enable SMP. This allows us to remove omap_4430sdp_defconfig. In addition to enabling SMP, we also need to disable some options to make the system boot: - For some reason LOCK_STAT causes tons of WARNING: at mm/percpu-vm.c:320 pcpu_alloc+0x2fc/0x888() so disable it for now. - MUSB init fails for multi-omap, disable it for now. - LOCAL_TIMERS hangs on omap4, disable it for now. Also disable DEBUG_LL as this should be only enabled for debugging. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 05:53:38 +08:00
CONFIG_SMP=y
omap2plus: omap4: Set NR_CPU to 2 instead of default 4 The omap2plus_defconfig picks default NR_CPU value as 4 which isn't correct for OMAP4430. Available CPUs are ony 2, so fix the same. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-18 01:55:03 +08:00
CONFIG_NR_CPUS=2
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_CMA=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_SECCOMP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support As this config must support boards which cannot support separate device trees, enable support for appended ones. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-01 21:13:13 +08:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
omap: Update omap2plus_defconfig to use ttyO instead ttyS With the omap-serial the device has changed from ttyS to ttyO as the system may have both omap-serial and 8250 ports. Note that systems using omap-serial need to be updated to use ttyO[012] instead of ttyS[012] in the bootloader, CONFIG_CMDLINE, /etc/inittab, and the root file system with mknod. Also you may need to add ttyO[012] to /etc/securetty. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-09 01:23:44 +08:00
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_KEXEC=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_GENERIC_CPUFREQ_CPU0=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_CPU_IDLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
CONFIG_NETFILTER=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_BT=m
CONFIG_BT_HCIUART=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_CFG80211=m
CONFIG_MAC80211=m
ARM: OMAP2+: enable devtmpfs and devtmpfs automount Since udev-182, udev no longer creates device nodes under /dev and this has to be managed by the kernel devtmpfs filesystem. This means that a kernel built with the current OMAP2+ config will not boot on a system with a recent udev. Also, it is good to have /dev automatically mounted since some non-initramfs based setups assumes this and don't manually mount it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Santosh Shilimkar<santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_DMA_CMA=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_OMAP_OCP2SCP=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_CONNECTOR=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
ARM: omap2plus_defconfig: Fix errors with NAND BCH Looks like we need to have BCH enabled to get NAND working and to avoid getting: nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-28 04:06:07 +08:00
CONFIG_MTD_NAND_ECC_BCH=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_SENSORS_TSL2550=m
ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor This patch enables BMP085 pressure sensor that can be found on OMAP4 Blaze Tablet development platform Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-02-18 21:20:52 +08:00
CONFIG_BMP085_I2C=m
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SENSORS_LIS3_I2C=m
ARM: OMAP4+: Move SRAM data to DT Use drivers/misc/sram.c driver to manage SRAM on all DT only OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of the existing private plat-omap/sram.c Address and size related data is removed from mach-omap2/sram.c and now passed to drivers/misc/sram.c from DT. Users can hence use general purpose allocator apis instead of OMAP private ones to manage and use SRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-11 00:04:03 +08:00
CONFIG_SRAM=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SCAN_ASYNC=y
ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver OMAP5 and DRA7 platforms need the AHCI platform driver for SATA support. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24 19:41:37 +08:00
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MD=y
CONFIG_NETDEVICES=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
omap: Update and rename common defconfig for omap2plus devices This patch addresses below things - Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds enabled to more appropriate name 'omap2plus_defconfig' - L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For OMAP3 only build the shift would be still 6 - Enable needed Errata's for OMAP4 to work with DMA based device drivers CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y - Enable the Micrel ethernet controller CONFIG_KS8851=y CONFIG_KS8851_MLL=y With above three changes, OMAP4 ethernet, mmc etc works reliably. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-16 01:10:19 +08:00
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_TI_CPSW=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:06:59 +08:00
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_AT803X_PHY=y
CONFIG_SMSC_PHY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_USBNET=y
ARM: OMAP: omap2plus_defconfig: Enable ehci-omap and sms95xx support Boards like beagle and panda use ehci based smsc95xx lan chips one has to manually enable these supports to get nfs working on these boards. So keep these support enable by default. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-05-10 05:19:13 +08:00
CONFIG_USB_NET_SMSC95XX=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:21 +08:00
CONFIG_WL_TI=y
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_KEYBOARD_MATRIX=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_KEYBOARD_TWL4030=y
CONFIG_INPUT_TOUCHSCREEN=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TOUCHSCREEN_ADS7846=m
ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen AM437x Starter Kit ships with EDT FT5306 touchscreen device. By enabling the driver we make sure touchscreen will work out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:00 +08:00
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
# CONFIG_LEGACY_PTYS is not set
ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial We should not select drivers from kconfig as they should by default be optional. Otherwise we'll be chasing broken dependencies forever: warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250 which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS) Fix the issue by removing the selects for zoom and add them to omap2plus_defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-05 02:28:21 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:21 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP Commit 8a6201b9 (ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial) fixed unmet direct dependencies for 8250, but failed to do the same for omap serial. This can cause the following warning: warning: (ARCH_OMAP2PLUS_TYPICAL) selects SERIAL_OMAP which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS && ARCH_OMAP2PLUS). We should not select drivers, they should be selected by the user. Fix the issue by removing the select and adding them to omap2plus_defconfig instead. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 01:54:29 +08:00
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_HW_RANDOM=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
ARM: OMAP2+: select PINCTRL in Kconfig Select PINCTRL in Kconfig under Typical OMAP configuration, this is required to add pinctrl driver to omap2+ family of devices. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated to select pinctrl-single in defconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-11 01:34:52 +08:00
CONFIG_PINCTRL_SINGLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
ARM: omap2plus_defconfig: Enable battery and reset drivers Since many omaps run on battery, we should have the battery drivers enabled. Let's also enable the reset driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_BATTERY_BQ27x00=m
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24735=m
CONFIG_POWER_RESET=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_POWER_AVS=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_SENSORS_LM75=m
ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver Enable the bandgap driver for TI SoCs thermal support. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-08 04:46:07 +08:00
CONFIG_THERMAL=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_CPU_THERMAL=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_TI_SOC_THERMAL=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_TI_THERMAL=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
CONFIG_WATCHDOG=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
ARM: OMAP: enable SYSCON and REGULATOR_PBIAS in omap2plus_defconfig Enable REGULATOR_PBIAS needed for SD card on most OMAPs. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Ball <chris@printf.net>
2014-02-19 22:56:40 +08:00
CONFIG_MFD_SYSCON=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_MFD_PALMAS=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_MFD_TPS65217=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 13:36:33 +08:00
CONFIG_MFD_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_MFD_TPS65910=y
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09 07:48:02 +08:00
CONFIG_TWL6040_CORE=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_REGULATOR_PALMAS=y
ARM: omap2plus_defconfig: Shrink with savedefconfig This saves few lines and makes it easier to make patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_REGULATOR_PBIAS=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:39 +08:00
CONFIG_REGULATOR_TI_ABB=y
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_REGULATOR_TPS65217=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 13:36:33 +08:00
CONFIG_REGULATOR_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_REGULATOR_TPS65910=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_REGULATOR_TWL4030=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
OMAP2/3/4: DSS2: Enable Display SubSystem as modules Enabling all the display interface options to be built as module And enabling all the display panels to be built as modules. Signed-off-by: Samreen <samreen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-24 14:26:40 +08:00
CONFIG_OMAP2_DSS=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_OMAP5_DSS_HDMI=y
OMAP2/3/4: DSS2: Enable Display SubSystem as modules Enabling all the display interface options to be built as module And enabling all the display panels to be built as modules. Signed-off-by: Samreen <samreen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-02-24 14:26:40 +08:00
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
ARM: OMAP2+: Add selected display drivers to omap2plus_defconfig Add some of the most common new display drivers to omap2plus_defconfig to be built as modules. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-07-23 15:18:13 +08:00
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
ARM: OMAP2+: Add selected display drivers to omap2plus_defconfig Add some of the most common new display drivers to omap2plus_defconfig to be built as modules. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-07-23 15:18:13 +08:00
CONFIG_DISPLAY_PANEL_DPI=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_DISPLAY_PANEL_DSI_CM=m
CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_GPIO=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 03:07:29 +08:00
CONFIG_SOUND=m
CONFIG_SND=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
ARM: omap2plus_defconfig: enable AM33XX SoC sound Without this, sound on AM437x Starter Kit will not work. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:01 +08:00
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_OMAP_SOC=m
ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio Many TI OMAP SoC based boards that uses twl4030 as codec have been updated to use the unified audio driver (omap-twl4030) since they have similar audio setup. So, is good to have it built to add audio support to these boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 03:30:00 +08:00
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09 07:48:02 +08:00
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 14:37:06 +08:00
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
ARM: omap2plus_defconfig: enable XHCI AM437x devices have a DWC3 IP inside of them. The host side implementation of DWC3 is XHCI compliant. By enabling XHCI driver, we get the USB host port on AM437x Starter Kit working out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:02 +08:00
CONFIG_USB_XHCI_HCD=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_USB_DWC3=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_TEST=y
ARM: OMAP2+: Select USB PHY for AM335x SoC Enable this option as it's required to use USB on AM335x SoC. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-12 23:14:29 +08:00
CONFIG_AM335X_PHY_USB=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
omap2/3: Update omap3_defconfig to build in all the 2420 based boards Note that booting 2420 depends on another patch posted earlier to not select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected. Also note that we cannot add omap2430 in yet because of the different clock addresses compared to 2420. Also note that we cannot have CONFIG_CPU_32v6K=y in order to boot on 24xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-13 04:26:49 +08:00
CONFIG_USB_ZERO=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MMC=y
CONFIG_SDIO_UART=y
omap2/3/4: Make omap3_defconfig usable on Nokia boards The bootloader on Nokia boards does not support updating the kernel cmdline. For the other boards, the bootloader provided cmdline will be used instead. To mount root on n8x0, compile in also the MMC_OMAP. It seems that the best way to mount root with the new kernels on Nokia boards is to mount root on mmcblk0p2. Note that n8x0 current has several issues booting with omap3_defconfig: The bootloader has a 2MB limit for loading kernels, so you may want to use kexec. Also ARMv6 does not currently work with ARMv7 for VFP and TLS. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_MMC_OMAP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MMC_OMAP_HS=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_NEW_LEDS=y
ARM: dts: Enable N900 keyboard sleep leds by default On N900 there are nice LEDs that show the state of the sys_clkreq and sys_off_mode pins. These LEDs go low when the system enters deeper idle states. The left LED shows the state of the sys_clkreq pin, and goes off during retention idle. The right LED shows the state of sys_off_mode pin and both go off during off idle. As N900 is a battery operated device, these LEDs should be off most of the time. So let's enable them by default so we can make sure the system is mostly idle. This allows the maintainers to also immediately test patches for PM regressions by looking at the LEDs, which certainly makes my life easier. The LED can naturally be disabled during runtime with: # echo none > /sys/class/leds/debug::sleep/trigger Note that we don't currently have support for omap3 errata 1.158 that remuxes GPIO pins to INPUT_PULLUP | MUX_MODE7 for the duration of idle. This means that the GPIO pins set high will go down during off idle. In this case it does not matter as the sys_off_mode goes down too, but there's still a slim chance of false off idle LED signals. If in doubt, false LED signals can be verified by the sys_off_mode or vdd_core values. Also note that to allow the UARTs to autoidle, the following needs to be run on N900 to enable off idle: #!/bin/sh uarts=$(find /sys/class/tty/ttyO*/device/power/ -type d) for uart in $uarts; do echo 3000 > $uart/autosuspend_delay_ms done uarts=$(find /sys/class/tty/ttyO*/power/ -type d) for uart in $uarts; do echo enabled > $uart/wakeup echo auto > $uart/control done echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode For retention idle, change the above to set 0 to enable_off_mode. Also note that without the twl4030 PM scripts the actual voltage scaling won't happen for off idle so we only get voltage scaling over I2C4 for retention idle. I'll do some device tree patches for those also a bit later on. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> [tony@atomide.com: also make sure the LEDs get built to see PM regressions] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:38 +08:00
CONFIG_LEDS_CLASS=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 16:37:59 +08:00
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_RTC_CLASS=y
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 03:57:16 +08:00
CONFIG_RTC_DRV_TWL92330=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_RTC_DRV_TWL4030=y
ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc The BeagleBone dev kit uses the built-in RTC module, so it would be nice to have this built by default in the omap2plus defconfig. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-29 23:03:35 +08:00
CONFIG_RTC_DRV_OMAP=y
ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine commit 13f30fc893e4610f67dd7a8b0b67aec02eac1775 Author: Russell King <rmk+kernel@arm.linux.org.uk> Date: Sat Apr 21 22:41:10 2012 +0100 mmc: omap: remove private DMA API implementation removed the private DMA API implementation from the OMAP mmc host to exclusively use the DMA engine API. Unfortunately OMAP MMC and High Speed MMC host drivers don't support poll mode and only works with DMA. Since omap2plus_defconfig doesn't enable this feature by default, the following error is happens on an IGEPv2 Rev.C (and probably on most OMAP boards with MMC support): [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 00:59:48 +08:00
CONFIG_DMADEVICES=y
ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig Build EDMA in by default to avoid fewer people stepping on their toes with broken DMA on drivers needing EDMA. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-27 11:42:03 +08:00
CONFIG_TI_EDMA=y
ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine commit 13f30fc893e4610f67dd7a8b0b67aec02eac1775 Author: Russell King <rmk+kernel@arm.linux.org.uk> Date: Sat Apr 21 22:41:10 2012 +0100 mmc: omap: remove private DMA API implementation removed the private DMA API implementation from the OMAP mmc host to exclusively use the DMA engine API. Unfortunately OMAP MMC and High Speed MMC host drivers don't support poll mode and only works with DMA. Since omap2plus_defconfig doesn't enable this feature by default, the following error is happens on an IGEPv2 Rev.C (and probably on most OMAP boards with MMC support): [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31 00:59:48 +08:00
CONFIG_DMA_OMAP=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 06:41:25 +08:00
CONFIG_EXTCON=y
CONFIG_EXTCON_PALMAS=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_PWM=y
ARM: omap2plus_defconfig: enable ECAP and EHRPWM Many of AM335x and AM437x hook backlight to one of these two devices. By enabling their drivers we make sure pwm-backlight can do its thing. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 02:07:03 +08:00
CONFIG_PWM_TIECAP=y
CONFIG_PWM_TIEHRPWM=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
ARM: omap2plus_defconfig: Shrink with savedefconfig This saves few lines and makes it easier to make patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:07 +08:00
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
ARM: OMAP: omap2plus_defconfig: Enable EXT4 support On OMAP boards that includes an SD card slot, an EXT4 partition could be used to store the root file system. So, the kernel should have built-in support for EXT4 to be able to mount the VFS root on boot. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-24 06:18:59 +08:00
CONFIG_EXT4_FS=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_FANOTIFY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in Commit 673ce00c5d6c (ARM: omap2plus_defconfig: Add support for distros with systemd) caused considerable bloat as noted by Paul Walmsley <paul@pwsan.com>. Let's fix this issue by making what we can into loadable modules for the systemd options. That's only IPV6 and AUTOFS4_FS it seems, and IPv6 defaults to a loadable module. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-28 00:00:21 +08:00
CONFIG_AUTOFS4_FS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-19 00:01:08 +08:00
CONFIG_TMPFS_POSIX_ACL=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_DEBUG_INFO=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 04:09:26 +08:00
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 00:18:20 +08:00
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y