linux-sg2042/include/drm/drm_fb_helper.h

631 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006-2009 Red Hat Inc.
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
*
* DRM framebuffer helper functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#ifndef DRM_FB_HELPER_H
#define DRM_FB_HELPER_H
struct drm_fb_helper;
#include <drm/drm_client.h>
#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <linux/kgdb.h>
#include <linux/vgaarb.h>
enum mode_set_atomic {
LEAVE_ATOMIC_MODE_SET,
ENTER_ATOMIC_MODE_SET,
};
struct drm_fb_offset {
int x, y;
};
struct drm_fb_helper_crtc {
struct drm_mode_set mode_set;
struct drm_display_mode *desired_mode;
int x, y;
int rotation;
};
/**
* struct drm_fb_helper_surface_size - describes fbdev size and scanout surface size
* @fb_width: fbdev width
* @fb_height: fbdev height
* @surface_width: scanout buffer width
* @surface_height: scanout buffer height
* @surface_bpp: scanout buffer bpp
* @surface_depth: scanout buffer depth
*
* Note that the scanout surface width/height may be larger than the fbdev
* width/height. In case of multiple displays, the scanout surface is sized
* according to the largest width/height (so it is large enough for all CRTCs
* to scanout). But the fbdev width/height is sized to the minimum width/
* height of all the displays. This ensures that fbcon fits on the smallest
* of the attached displays. fb_width/fb_height is used by
* drm_fb_helper_fill_info() to fill out the &fb_info.var structure.
*/
struct drm_fb_helper_surface_size {
u32 fb_width;
u32 fb_height;
u32 surface_width;
u32 surface_height;
u32 surface_bpp;
u32 surface_depth;
};
/**
* struct drm_fb_helper_funcs - driver callbacks for the fbdev emulation library
*
* Driver callbacks used by the fbdev emulation helper library.
*/
struct drm_fb_helper_funcs {
/**
* @fb_probe:
*
* Driver callback to allocate and initialize the fbdev info structure.
* Furthermore it also needs to allocate the DRM framebuffer used to
* back the fbdev.
*
* This callback is mandatory.
*
* RETURNS:
*
* The driver should return 0 on success and a negative error code on
* failure.
*/
int (*fb_probe)(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes);
};
struct drm_fb_helper_connector {
struct drm_connector *connector;
};
/**
* struct drm_fb_helper - main structure to emulate fbdev on top of KMS
* @fb: Scanout framebuffer object
* @dev: DRM device
* @crtc_count: number of possible CRTCs
* @crtc_info: per-CRTC helper state (mode, x/y offset, etc)
* @connector_count: number of connected connectors
* @connector_info_alloc_count: size of connector_info
* @funcs: driver callbacks for fb helper
* @fbdev: emulated fbdev device info struct
* @pseudo_palette: fake palette of 16 colors
* @dirty_clip: clip rectangle used with deferred_io to accumulate damage to
* the screen buffer
* @dirty_lock: spinlock protecting @dirty_clip
* @dirty_work: worker used to flush the framebuffer
* @resume_work: worker used during resume if the console lock is already taken
*
* This is the main structure used by the fbdev helpers. Drivers supporting
* fbdev emulation should embedded this into their overall driver structure.
* Drivers must also fill out a &struct drm_fb_helper_funcs with a few
* operations.
*/
struct drm_fb_helper {
/**
* @client:
*
* DRM client used by the generic fbdev emulation.
*/
struct drm_client_dev client;
/**
* @buffer:
*
* Framebuffer used by the generic fbdev emulation.
*/
struct drm_client_buffer *buffer;
struct drm_framebuffer *fb;
struct drm_device *dev;
int crtc_count;
struct drm_fb_helper_crtc *crtc_info;
int connector_count;
int connector_info_alloc_count;
/**
* @sw_rotations:
* Bitmask of all rotations requested for panel-orientation which
* could not be handled in hardware. If only one bit is set
* fbdev->fbcon_rotate_hint gets set to the requested rotation.
*/
int sw_rotations;
/**
* @connector_info:
*
* Array of per-connector information. Do not iterate directly, but use
* drm_fb_helper_for_each_connector.
*/
struct drm_fb_helper_connector **connector_info;
const struct drm_fb_helper_funcs *funcs;
struct fb_info *fbdev;
u32 pseudo_palette[17];
struct drm_clip_rect dirty_clip;
spinlock_t dirty_lock;
struct work_struct dirty_work;
struct work_struct resume_work;
/**
* @lock:
*
* Top-level FBDEV helper lock. This protects all internal data
* structures and lists, such as @connector_info and @crtc_info.
*
* FIXME: fbdev emulation locking is a mess and long term we want to
* protect all helper internal state with this lock as well as reduce
* core KMS locking as much as possible.
*/
struct mutex lock;
/**
* @kernel_fb_list:
*
* Entry on the global kernel_fb_helper_list, used for kgdb entry/exit.
*/
struct list_head kernel_fb_list;
/**
* @delayed_hotplug:
*
* A hotplug was received while fbdev wasn't in control of the DRM
* device, i.e. another KMS master was active. The output configuration
* needs to be reprobe when fbdev is in control again.
*/
bool delayed_hotplug;
drm/fb-helper: Support deferred setup FB helper code falls back to a 1024x768 mode if no outputs are connected or don't report back any modes upon initialization. This can be annoying because outputs that are added to FB helper later on can't be used with FB helper if they don't support a matching mode. The fallback is in place because VGA connectors can happen to report an unknown connection status even when they are in fact connected. Some drivers have custom solutions in place to defer FB helper setup until at least one output is connected. But the logic behind these solutions is always the same and there is nothing driver-specific about it, so a better alterative is to fix the FB helper core and add support for all drivers automatically. This patch adds support for deferred FB helper setup. It checks all the connectors for their connection status, and if all of them report to be disconnected marks the FB helper as needing deferred setup. Whet setup is deferred, the FB helper core will automatically retry setup after a hotplug event, and it will keep trying until it succeeds. v2: Rebase onto my entirely reworked fbdev helper locking. One big difference is that this version again drops&reacquires the fbdev lock (which is now fb_helper->lock, but before this patch series it was mode_config->mutex), because register_framebuffer must be able to recurse back into fbdev helper code for the initial screen setup. v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon return, I've fumbled that in the deferred setup case (Liviu). v4: I was blind, redo this all. __drm_fb_helper_initial_config shouldn't need to reacquire fb_helper->lock, that just confuses callers. I myself got confused by kernel_fb_helper_lock and somehow thought it's the same as fb_helper->lock. Tsk. Also simplify the logic a bit (we don't need two functions to probe connectors), we can stick much closer to the existing code. And update some comments I've spotted that are outdated. v5: Don't pass -EAGAIN to drivers, it's just an internal error code (Liviu). v6: Add _and_unlock suffix to clarify locking (Maarten) Cc: Liviu Dudau <liviu@dudau.co.uk> Cc: John Stultz <john.stultz@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> (v1) Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com> Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-06 21:00:21 +08:00
/**
* @deferred_setup:
*
* If no outputs are connected (disconnected or unknown) the FB helper
* code will defer setup until at least one of the outputs shows up.
* This field keeps track of the status so that setup can be retried
* at every hotplug event until it succeeds eventually.
*
* Protected by @lock.
*/
bool deferred_setup;
/**
* @preferred_bpp:
*
* Temporary storage for the driver's preferred BPP setting passed to
* FB helper initialization. This needs to be tracked so that deferred
* FB helper setup can pass this on.
*
* See also: @deferred_setup
*/
int preferred_bpp;
};
static inline struct drm_fb_helper *
drm_fb_helper_from_client(struct drm_client_dev *client)
{
return container_of(client, struct drm_fb_helper, client);
}
/**
* define DRM_FB_HELPER_DEFAULT_OPS - helper define for drm drivers
*
* Helper define to register default implementations of drm_fb_helper
* functions. To be used in struct fb_ops of drm drivers.
*/
#define DRM_FB_HELPER_DEFAULT_OPS \
.fb_check_var = drm_fb_helper_check_var, \
.fb_set_par = drm_fb_helper_set_par, \
.fb_setcmap = drm_fb_helper_setcmap, \
.fb_blank = drm_fb_helper_blank, \
.fb_pan_display = drm_fb_helper_pan_display, \
.fb_debug_enter = drm_fb_helper_debug_enter, \
.fb_debug_leave = drm_fb_helper_debug_leave, \
.fb_ioctl = drm_fb_helper_ioctl
#ifdef CONFIG_DRM_FBDEV_EMULATION
void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
const struct drm_fb_helper_funcs *funcs);
int drm_fb_helper_init(struct drm_device *dev,
drm: Rely on mode_config data for fb_helper initialization Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-03 00:26:40 +08:00
struct drm_fb_helper *helper, int max_conn);
void drm_fb_helper_fini(struct drm_fb_helper *helper);
int drm_fb_helper_blank(int blank, struct fb_info *info);
int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info);
int drm_fb_helper_set_par(struct fb_info *info);
int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
struct fb_info *info);
int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper);
struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper);
void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper);
void drm_fb_helper_fill_info(struct fb_info *info,
struct drm_fb_helper *fb_helper,
struct drm_fb_helper_surface_size *sizes);
void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper);
void drm_fb_helper_deferred_io(struct fb_info *info,
struct list_head *pagelist);
int drm_fb_helper_defio_init(struct drm_fb_helper *fb_helper);
ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
size_t count, loff_t *ppos);
ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
size_t count, loff_t *ppos);
void drm_fb_helper_sys_fillrect(struct fb_info *info,
const struct fb_fillrect *rect);
void drm_fb_helper_sys_copyarea(struct fb_info *info,
const struct fb_copyarea *area);
void drm_fb_helper_sys_imageblit(struct fb_info *info,
const struct fb_image *image);
void drm_fb_helper_cfb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect);
void drm_fb_helper_cfb_copyarea(struct fb_info *info,
const struct fb_copyarea *area);
void drm_fb_helper_cfb_imageblit(struct fb_info *info,
const struct fb_image *image);
void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper, bool suspend);
void drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper,
bool suspend);
int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg);
drm: Take lock around probes for drm_fb_helper_hotplug_event We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by: Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-22 18:03:57 +08:00
int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
int drm_fb_helper_debug_enter(struct fb_info *info);
int drm_fb_helper_debug_leave(struct fb_info *info);
struct drm_display_mode *
drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector,
int width, int height);
struct drm_display_mode *
drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn);
int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper, struct drm_connector *connector);
int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
struct drm_connector *connector);
int drm_fb_helper_fbdev_setup(struct drm_device *dev,
struct drm_fb_helper *fb_helper,
const struct drm_fb_helper_funcs *funcs,
unsigned int preferred_bpp,
unsigned int max_conn_count);
void drm_fb_helper_fbdev_teardown(struct drm_device *dev);
void drm_fb_helper_lastclose(struct drm_device *dev);
void drm_fb_helper_output_poll_changed(struct drm_device *dev);
int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper,
struct drm_fb_helper_surface_size *sizes);
int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp);
#else
static inline void drm_fb_helper_prepare(struct drm_device *dev,
struct drm_fb_helper *helper,
const struct drm_fb_helper_funcs *funcs)
{
}
static inline int drm_fb_helper_init(struct drm_device *dev,
struct drm_fb_helper *helper,
int max_conn)
{
/* So drivers can use it to free the struct */
helper->dev = dev;
dev->fb_helper = helper;
return 0;
}
static inline void drm_fb_helper_fini(struct drm_fb_helper *helper)
{
if (helper && helper->dev)
helper->dev->fb_helper = NULL;
}
static inline int drm_fb_helper_blank(int blank, struct fb_info *info)
{
return 0;
}
static inline int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
return 0;
}
static inline int drm_fb_helper_set_par(struct fb_info *info)
{
return 0;
}
static inline int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
return 0;
}
static inline int
drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
{
return 0;
}
static inline struct fb_info *
drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
{
return NULL;
}
static inline void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper)
{
}
static inline void
drm_fb_helper_fill_info(struct fb_info *info,
struct drm_fb_helper *fb_helper,
struct drm_fb_helper_surface_size *sizes)
{
}
static inline int drm_fb_helper_setcmap(struct fb_cmap *cmap,
struct fb_info *info)
{
return 0;
}
static inline int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
return 0;
}
static inline void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
{
}
static inline void drm_fb_helper_deferred_io(struct fb_info *info,
struct list_head *pagelist)
{
}
static inline int drm_fb_helper_defio_init(struct drm_fb_helper *fb_helper)
{
return -ENODEV;
}
static inline ssize_t drm_fb_helper_sys_read(struct fb_info *info,
char __user *buf, size_t count,
loff_t *ppos)
{
return -ENODEV;
}
static inline ssize_t drm_fb_helper_sys_write(struct fb_info *info,
const char __user *buf,
size_t count, loff_t *ppos)
{
return -ENODEV;
}
static inline void drm_fb_helper_sys_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
}
static inline void drm_fb_helper_sys_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
}
static inline void drm_fb_helper_sys_imageblit(struct fb_info *info,
const struct fb_image *image)
{
}
static inline void drm_fb_helper_cfb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
}
static inline void drm_fb_helper_cfb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
}
static inline void drm_fb_helper_cfb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
}
static inline void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper,
bool suspend)
{
}
static inline void
drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper, bool suspend)
{
}
static inline int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
{
return 0;
}
static inline int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper,
int bpp_sel)
{
return 0;
}
static inline int
drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
{
return 0;
}
static inline int drm_fb_helper_debug_enter(struct fb_info *info)
{
return 0;
}
static inline int drm_fb_helper_debug_leave(struct fb_info *info)
{
return 0;
}
static inline struct drm_display_mode *
drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector,
int width, int height)
{
return NULL;
}
static inline struct drm_display_mode *
drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn,
int width, int height)
{
return NULL;
}
static inline int
drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper,
struct drm_connector *connector)
{
return 0;
}
static inline int
drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
struct drm_connector *connector)
{
return 0;
}
static inline int
drm_fb_helper_fbdev_setup(struct drm_device *dev,
struct drm_fb_helper *fb_helper,
const struct drm_fb_helper_funcs *funcs,
unsigned int preferred_bpp,
unsigned int max_conn_count)
{
/* So drivers can use it to free the struct */
dev->fb_helper = fb_helper;
return 0;
}
static inline void drm_fb_helper_fbdev_teardown(struct drm_device *dev)
{
dev->fb_helper = NULL;
}
static inline void drm_fb_helper_lastclose(struct drm_device *dev)
{
}
static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev)
{
}
static inline int
drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper,
struct drm_fb_helper_surface_size *sizes)
{
return 0;
}
static inline int
drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp)
{
return 0;
}
#endif
/**
* drm_fb_helper_remove_conflicting_framebuffers - remove firmware-configured framebuffers
* @a: memory range, users of which are to be removed
* @name: requesting driver name
* @primary: also kick vga16fb if present
*
* This function removes framebuffer devices (initialized by firmware/bootloader)
* which use memory range described by @a. If @a is NULL all such devices are
* removed.
*/
static inline int
drm_fb_helper_remove_conflicting_framebuffers(struct apertures_struct *a,
const char *name, bool primary)
{
drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y When CONFIG_DRM_KMS_FB_HELPER is disabled, we can have a configuration in which some DRM drivers are built-in, but the framebuffer core is a loadable module. This results in a link error, such as: drivers/gpu/drm/radeon/radeon.o: In function `radeon_pci_probe': radeon_kfd.c:(.text.radeon_pci_probe+0xbc): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/amd/amdgpu/amdgpu.o: In function `amdgpu_pci_probe': amdgpu_mn.c:(.text.amdgpu_pci_probe+0xa8): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/mgag200/mgag200.o: In function `mga_vram_init': mgag200_ttm.c:(.text.mga_vram_init+0xa8): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/mgag200/mgag200.o: In function `mga_pci_probe': mgag200_ttm.c:(.text.mga_pci_probe+0x88): undefined reference to `remove_conflicting_framebuffers' Makefile:969: recipe for target 'vmlinux' failed This changes the compile-time check to IS_REACHABLE, which means we end up not calling remove_conflicting_framebuffers() in the configuration, which seems good enough, as we know that no framebuffer driver is loaded by the time that the built-in DRM driver calls remove_conflicting_framebuffers. We could alternatively avoid the link error by forcing CONFIG_FB to not be a module in this case, but that wouldn't change anything at runtime, and just make the already convoluted set of dependencies worse here. I could not find out what happens if the fbdev driver gets loaded as a module after the DRM driver is already initialized, but that is a case that can happen with or without this patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 0a3bfe29f816 ("drm/fb-helper: Fix the dummy remove_conflicting_framebuffers") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160829123428.3260105-1-arnd@arndb.de Link: http://patchwork.freedesktop.org/patch/msgid/1472461923-14364-1-git-send-email-gnuiyl@gmail.com
2016-08-29 20:34:07 +08:00
#if IS_REACHABLE(CONFIG_FB)
return remove_conflicting_framebuffers(a, name, primary);
#else
return 0;
#endif
}
/**
* drm_fb_helper_remove_conflicting_pci_framebuffers - remove firmware-configured framebuffers for PCI devices
* @pdev: PCI device
* @resource_id: index of PCI BAR configuring framebuffer memory
* @name: requesting driver name
*
* This function removes framebuffer devices (eg. initialized by firmware)
* using memory range configured for @pdev's BAR @resource_id.
*
* The function assumes that PCI device with shadowed ROM drives a primary
* display and so kicks out vga16fb.
*/
static inline int
drm_fb_helper_remove_conflicting_pci_framebuffers(struct pci_dev *pdev,
int resource_id,
const char *name)
{
int ret = 0;
/*
* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over.
*/
#if IS_REACHABLE(CONFIG_FB)
ret = remove_conflicting_pci_framebuffers(pdev, resource_id, name);
#endif
if (ret == 0)
ret = vga_remove_vgacon(pdev);
return ret;
}
#endif