linux-sg2042/include/scsi/scsi_tcq.h

169 lines
4.1 KiB
C
Raw Normal View History

#ifndef _SCSI_SCSI_TCQ_H
#define _SCSI_SCSI_TCQ_H
#include <linux/blkdev.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#define MSG_SIMPLE_TAG 0x20
#define MSG_HEAD_TAG 0x21
#define MSG_ORDERED_TAG 0x22
#define SCSI_NO_TAG (-1) /* identify no tag in use */
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
#ifdef CONFIG_BLOCK
/**
* scsi_get_tag_type - get the type of tag the device supports
* @sdev: the scsi device
*
* Notes:
* If the drive only supports simple tags, returns MSG_SIMPLE_TAG
* if it supports all tag types, returns MSG_ORDERED_TAG.
*/
static inline int scsi_get_tag_type(struct scsi_device *sdev)
{
if (!sdev->tagged_supported)
return 0;
if (sdev->ordered_tags)
return MSG_ORDERED_TAG;
if (sdev->simple_tags)
return MSG_SIMPLE_TAG;
return 0;
}
static inline void scsi_set_tag_type(struct scsi_device *sdev, int tag)
{
switch (tag) {
case MSG_ORDERED_TAG:
sdev->ordered_tags = 1;
/* fall through */
case MSG_SIMPLE_TAG:
sdev->simple_tags = 1;
break;
case 0:
/* fall through */
default:
sdev->ordered_tags = 0;
sdev->simple_tags = 0;
break;
}
}
/**
* scsi_activate_tcq - turn on tag command queueing
* @SDpnt: device to turn on TCQ for
* @depth: queue depth
*
* Notes:
* Eventually, I hope depth would be the maximum depth
* the device could cope with and the real queue depth
* would be adjustable from 0 to depth.
**/
static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
{
if (!sdev->tagged_supported)
return;
if (!blk_queue_tagged(sdev->request_queue))
blk_queue_init_tags(sdev->request_queue, depth,
sdev->host->bqt);
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
}
/**
* scsi_deactivate_tcq - turn off tag command queueing
* @SDpnt: device to turn off TCQ for
**/
static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
{
if (blk_queue_tagged(sdev->request_queue))
blk_queue_free_tags(sdev->request_queue);
scsi_adjust_queue_depth(sdev, 0, depth);
}
/**
* scsi_populate_tag_msg - place a tag message in a buffer
* @SCpnt: pointer to the Scsi_Cmnd for the tag
* @msg: pointer to the area to place the tag
*
* Notes:
* designed to create the correct type of tag message for the
* particular request. Returns the size of the tag message.
* May return 0 if TCQ is disabled for this device.
**/
static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg)
{
struct request *req = cmd->request;
struct scsi_device *sdev = cmd->device;
if (blk_rq_tagged(req)) {
if (sdev->ordered_tags && req->cmd_flags & REQ_HARDBARRIER)
*msg++ = MSG_ORDERED_TAG;
else
*msg++ = MSG_SIMPLE_TAG;
*msg++ = req->tag;
return 2;
}
return 0;
}
/**
* scsi_find_tag - find a tagged command by device
* @SDpnt: pointer to the ScSI device
* @tag: the tag number
*
* Notes:
* Only works with tags allocated by the generic blk layer.
**/
static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
{
struct request *req;
if (tag != SCSI_NO_TAG) {
req = blk_queue_find_tag(sdev->request_queue, tag);
return req ? (struct scsi_cmnd *)req->special : NULL;
}
/* single command, look in space */
return sdev->current_cmnd;
}
/**
* scsi_init_shared_tag_map - create a shared tag map
* @shost: the host to share the tag map among all devices
* @depth: the total depth of the map
*/
static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
{
shost->bqt = blk_init_tags(depth);
return shost->bqt ? 0 : -ENOMEM;
}
/**
* scsi_host_find_tag - find the tagged command by host
* @shost: pointer to scsi_host
* @tag: tag of the scsi_cmnd
*
* Notes:
* Only works with tags allocated by the generic blk layer.
**/
static inline struct scsi_cmnd *scsi_host_find_tag(struct Scsi_Host *shost,
int tag)
{
struct request *req;
if (tag != SCSI_NO_TAG) {
req = blk_map_queue_find_tag(shost->bqt, tag);
return req ? (struct scsi_cmnd *)req->special : NULL;
}
return NULL;
}
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-10-01 02:45:40 +08:00
#endif /* CONFIG_BLOCK */
#endif /* _SCSI_SCSI_TCQ_H */