hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/usb/host/Makefile

22 lines
577 B
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-24 08:14:37 +08:00
# Makefile for USB Host Controller Drivers
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
[PATCH] USB: hcd uses EXTRA_CFLAGS for -DDEBUG This modifies the HCD builds to automatically "-DDEBUG" if CONFIG_USB_DEBUG is selected. It's just a minor source code cleanup, guaranteeing consistency. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-08 12:45:20 +08:00
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
USB: ISP1760 HCD driver This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24 06:37:04 +08:00
isp1760-objs := isp1760-hcd.o isp1760-if.o
[PATCH] USB: move handoff code This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
2005-09-24 08:14:37 +08:00
obj-$(CONFIG_PCI) += pci-quirks.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
[PATCH] USB: Add isp116x-hcd USB host controller driver This patch provides an "isp116x-hcd" driver for Philips' ISP1160/ISP1161 USB host controllers. The driver: - is relatively small, meant for use on embedded platforms. - runs usbtests 1-14 without problems for days. - has been in use by 6-7 different people on ARM and PPC platforms, running a range of devices including USB hubs. - supports suspend/resume of both the platform device and the root hub; supports remote wakeup of the root hub (but NOT the platform device) by USB devices. - does NOT support ISO transfers (nobody has asked for them). - is PIO-only. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-10 03:57:39 +08:00
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
[PATCH] USB: add sl811_cs support This adds support for a CF-card USB Host adapter, the Ratoc REX-CFU1U, by wrapping a PCMCIA driver around the existing "sl811-hcd" platform driver. This CF card is especially useful for PDAs, which currently tend to have no other solution for USB host capability. From: Botond Botyanszki <boti@rocketmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-26 20:55:55 +08:00
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
USB: u132-hcd: host controller driver for ELAN U132 adapter This "u132-hcd" module is one half of the "driver" for ELAN's U132 which is a USB to CardBus OHCI controller adapter. This module needs the "ftdi-elan" module in order to communicate to CardBus OHCI controller inserted into the U132 adapter. When the "ftdi-elan" module detects a supported CardBus OHCI controller in the U132 adapter it loads this "u132-hcd" module. Upon a successful device probe() the single workqueue is started up which does all the processing of commands from the USB core that implement the host controller. The workqueue maintains the urb queues and issues commands via the functions exported by the "ftdi-elan" module. Each such command will result in a callback. Note that the "ftdi-elan" module is a USB client driver. Note that this "u132-hcd" module is a (cut-down OHCI) host controller. Thus we have a topology with the parent of a host controller being a USB client! This really stresses the USB subsystem semaphore/mutex handling in the module removal. Signed-off-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-13 18:27:35 +08:00
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
USB: r8a66597-hcd: host controller driver for R8A66597 I would like to submit Renesas R8A66597 USB HCD driver. R8A66597 is Renesas USB 2.0 host and peripheral combined controller device originally designed for embedded products. As a limitation of this device, it does not support externel hub more than 2 tier, and cannot communicate with a USB device more than 10. Then this device is not compatible with EHCI and/or OHCI, I wrote driver support patch based on sl811 code. This driver has the following unique specifications: - Implement transfer timeout to share one pipe with plural endpoint. - Detach detection of a USB device connected to externel hub. The driver has been tested external hub, usb-hdd, usb-cdrom, usb-speaker, mice, keyboard, and usbtest driver. Signed-off-by : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-10 12:18:19 +08:00
obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
USB: ISP1760 HCD driver This driver has been written from scratch and supports the ISP1760. ISP1761 might (should) work as well but the OTG isn't supported. Also ISO packets are not. However, it works on my little PowerPC board. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24 06:37:04 +08:00
obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o