linux-sg2042/sound/soc/omap/omap-pcm.c

418 lines
11 KiB
C
Raw Normal View History

/*
* omap-pcm.c -- ALSA PCM interface for the OMAP SoC
*
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Jarkko Nikula <jhnikula@gmail.com>
* Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <plat/dma.h>
#include "omap-pcm.h"
static const struct snd_pcm_hardware omap_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_RESUME,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S32_LE,
.period_bytes_min = 32,
.period_bytes_max = 64 * 1024,
.periods_min = 2,
.periods_max = 255,
.buffer_bytes_max = 128 * 1024,
};
struct omap_runtime_data {
spinlock_t lock;
struct omap_pcm_dma_data *dma_data;
int dma_ch;
int period_index;
};
static void omap_pcm_dma_irq(int ch, u16 stat, void *data)
{
struct snd_pcm_substream *substream = data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
unsigned long flags;
if ((cpu_is_omap1510())) {
/*
* OMAP1510 doesn't fully support DMA progress counter
* and there is no software emulation implemented yet,
* so have to maintain our own progress counters
* that can be used by omap_pcm_pointer() instead.
*/
spin_lock_irqsave(&prtd->lock, flags);
if ((stat == OMAP_DMA_LAST_IRQ) &&
(prtd->period_index == runtime->periods - 1)) {
/* we are in sync, do nothing */
spin_unlock_irqrestore(&prtd->lock, flags);
return;
}
if (prtd->period_index >= 0) {
if (stat & OMAP_DMA_BLOCK_IRQ) {
/* end of buffer reached, loop back */
prtd->period_index = 0;
} else if (stat & OMAP_DMA_LAST_IRQ) {
/* update the counter for the last period */
prtd->period_index = runtime->periods - 1;
} else if (++prtd->period_index >= runtime->periods) {
/* end of buffer missed? loop back */
prtd->period_index = 0;
}
}
spin_unlock_irqrestore(&prtd->lock, flags);
}
snd_pcm_period_elapsed(substream);
}
/* this may get called several times by oss emulation */
static int omap_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct omap_runtime_data *prtd = runtime->private_data;
struct omap_pcm_dma_data *dma_data;
int err = 0;
dma_data = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
/* return if this is a bufferless transfer e.g.
* codec <--> BT codec or GSM modem -- lg FIXME */
if (!dma_data)
return 0;
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = params_buffer_bytes(params);
if (prtd->dma_data)
return 0;
prtd->dma_data = dma_data;
err = omap_request_dma(dma_data->dma_req, dma_data->name,
omap_pcm_dma_irq, substream, &prtd->dma_ch);
if (!err) {
/*
* Link channel with itself so DMA doesn't need any
* reprogramming while looping the buffer
*/
omap_dma_link_lch(prtd->dma_ch, prtd->dma_ch);
}
return err;
}
static int omap_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
if (prtd->dma_data == NULL)
return 0;
omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch);
omap_free_dma(prtd->dma_ch);
prtd->dma_data = NULL;
snd_pcm_set_runtime_buffer(substream, NULL);
return 0;
}
static int omap_pcm_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
struct omap_pcm_dma_data *dma_data = prtd->dma_data;
struct omap_dma_channel_params dma_params;
int bytes;
/* return if this is a bufferless transfer e.g.
* codec <--> BT codec or GSM modem -- lg FIXME */
if (!prtd->dma_data)
return 0;
memset(&dma_params, 0, sizeof(dma_params));
dma_params.data_type = dma_data->data_type;
dma_params.trigger = dma_data->dma_req;
dma_params.sync_mode = dma_data->sync_mode;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.dst_amode = OMAP_DMA_AMODE_CONSTANT;
dma_params.src_or_dst_synch = OMAP_DMA_DST_SYNC;
dma_params.src_start = runtime->dma_addr;
dma_params.dst_start = dma_data->port_addr;
dma_params.dst_port = OMAP_DMA_PORT_MPUI;
dma_params.dst_fi = dma_data->packet_size;
} else {
dma_params.src_amode = OMAP_DMA_AMODE_CONSTANT;
dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.src_or_dst_synch = OMAP_DMA_SRC_SYNC;
dma_params.src_start = dma_data->port_addr;
dma_params.dst_start = runtime->dma_addr;
dma_params.src_port = OMAP_DMA_PORT_MPUI;
dma_params.src_fi = dma_data->packet_size;
}
/*
* Set DMA transfer frame size equal to ALSA period size and frame
* count as no. of ALSA periods. Then with DMA frame interrupt enabled,
* we can transfer the whole ALSA buffer with single DMA transfer but
* still can get an interrupt at each period bounary
*/
bytes = snd_pcm_lib_period_bytes(substream);
dma_params.elem_count = bytes >> dma_data->data_type;
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
if ((cpu_is_omap1510()))
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
else
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
if (!(cpu_class_is_omap1())) {
omap_set_dma_src_burst_mode(prtd->dma_ch,
OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(prtd->dma_ch,
OMAP_DMA_DATA_BURST_16);
}
return 0;
}
static int omap_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
struct omap_pcm_dma_data *dma_data = prtd->dma_data;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&prtd->lock, flags);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->period_index = 0;
/* Configure McBSP internal buffer usage */
if (dma_data->set_threshold)
dma_data->set_threshold(substream);
omap_start_dma(prtd->dma_ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->period_index = -1;
omap_stop_dma(prtd->dma_ch);
break;
default:
ret = -EINVAL;
}
spin_unlock_irqrestore(&prtd->lock, flags);
return ret;
}
static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
dma_addr_t ptr;
snd_pcm_uframes_t offset;
if (cpu_is_omap1510()) {
offset = prtd->period_index * runtime->period_size;
} else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
ptr = omap_get_dma_dst_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
} else {
ptr = omap_get_dma_src_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
}
if (offset >= runtime->buffer_size)
offset = 0;
return offset;
}
static int omap_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd;
int ret;
snd_soc_set_runtime_hwparams(substream, &omap_pcm_hardware);
/* Ensure that buffer size is a multiple of period size */
ret = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
if (ret < 0)
goto out;
prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
if (prtd == NULL) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&prtd->lock);
runtime->private_data = prtd;
out:
return ret;
}
static int omap_pcm_close(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
kfree(runtime->private_data);
return 0;
}
static int omap_pcm_mmap(struct snd_pcm_substream *substream,
struct vm_area_struct *vma)
{
struct snd_pcm_runtime *runtime = substream->runtime;
return dma_mmap_writecombine(substream->pcm->card->dev, vma,
runtime->dma_area,
runtime->dma_addr,
runtime->dma_bytes);
}
static struct snd_pcm_ops omap_pcm_ops = {
.open = omap_pcm_open,
.close = omap_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = omap_pcm_hw_params,
.hw_free = omap_pcm_hw_free,
.prepare = omap_pcm_prepare,
.trigger = omap_pcm_trigger,
.pointer = omap_pcm_pointer,
.mmap = omap_pcm_mmap,
};
static u64 omap_pcm_dmamask = DMA_BIT_MASK(64);
static int omap_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
int stream)
{
struct snd_pcm_substream *substream = pcm->streams[stream].substream;
struct snd_dma_buffer *buf = &substream->dma_buffer;
size_t size = omap_pcm_hardware.buffer_bytes_max;
buf->dev.type = SNDRV_DMA_TYPE_DEV;
buf->dev.dev = pcm->card->dev;
buf->private_data = NULL;
buf->area = dma_alloc_writecombine(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);
if (!buf->area)
return -ENOMEM;
buf->bytes = size;
return 0;
}
static void omap_pcm_free_dma_buffers(struct snd_pcm *pcm)
{
struct snd_pcm_substream *substream;
struct snd_dma_buffer *buf;
int stream;
for (stream = 0; stream < 2; stream++) {
substream = pcm->streams[stream].substream;
if (!substream)
continue;
buf = &substream->dma_buffer;
if (!buf->area)
continue;
dma_free_writecombine(pcm->card->dev, buf->bytes,
buf->area, buf->addr);
buf->area = NULL;
}
}
static int omap_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
struct snd_pcm *pcm)
{
int ret = 0;
if (!card->dev->dma_mask)
card->dev->dma_mask = &omap_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(64);
if (dai->playback.channels_min) {
ret = omap_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_PLAYBACK);
if (ret)
goto out;
}
if (dai->capture.channels_min) {
ret = omap_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_CAPTURE);
if (ret)
goto out;
}
out:
return ret;
}
struct snd_soc_platform omap_soc_platform = {
.name = "omap-pcm-audio",
.pcm_ops = &omap_pcm_ops,
.pcm_new = omap_pcm_new,
.pcm_free = omap_pcm_free_dma_buffers,
};
EXPORT_SYMBOL_GPL(omap_soc_platform);
static int __init omap_soc_platform_init(void)
{
return snd_soc_register_platform(&omap_soc_platform);
}
module_init(omap_soc_platform_init);
static void __exit omap_soc_platform_exit(void)
{
snd_soc_unregister_platform(&omap_soc_platform);
}
module_exit(omap_soc_platform_exit);
MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");