linux-sg2042/arch/alpha/kernel/core_irongate.c

421 lines
10 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/core_irongate.c
*
* Based on code written by David A. Rusling (david.rusling@reo.mts.dec.com).
*
* Copyright (C) 1999 Alpha Processor, Inc.,
* (David Daniel, Stig Telfer, Soohoon Lee)
*
* Code common to all IRONGATE core logic chips.
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_irongate.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <asm/ptrace.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "pci_impl.h"
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
igcsr32 *IronECC;
/*
* Given a bus, device, and function number, compute resulting
* configuration space address accordingly. It is therefore not safe
* to have concurrent invocations to configuration space access
* routines, but there really shouldn't be any need for this.
*
* addr[31:24] reserved
* addr[23:16] bus number (8 bits = 128 possible buses)
* addr[15:11] Device number (5 bits)
* addr[10: 8] function number
* addr[ 7: 2] register number
*
* For IRONGATE:
* if (bus = addr[23:16]) == 0
* then
* type 0 config cycle:
* addr_on_pci[31:11] = id selection for device = addr[15:11]
* addr_on_pci[10: 2] = addr[10: 2] ???
* addr_on_pci[ 1: 0] = 00
* else
* type 1 config cycle (pass on with no decoding):
* addr_on_pci[31:24] = 0
* addr_on_pci[23: 2] = addr[23: 2]
* addr_on_pci[ 1: 0] = 01
* fi
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., SCSI and Ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr, unsigned char *type1)
{
unsigned long addr;
u8 bus = pbus->number;
DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, "
"pci_addr=0x%p, type1=0x%p)\n",
bus, device_fn, where, pci_addr, type1));
*type1 = (bus != 0);
addr = (bus << 16) | (device_fn << 8) | where;
addr |= IRONGATE_CONF;
*pci_addr = addr;
DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
return 0;
}
static int
irongate_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
*value = __kernel_ldbu(*(vucp)addr);
break;
case 2:
*value = __kernel_ldwu(*(vusp)addr);
break;
case 4:
*value = *(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
irongate_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
__kernel_stb(value, *(vucp)addr);
mb();
__kernel_ldbu(*(vucp)addr);
break;
case 2:
__kernel_stw(value, *(vusp)addr);
mb();
__kernel_ldwu(*(vusp)addr);
break;
case 4:
*(vuip)addr = value;
mb();
*(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops irongate_pci_ops =
{
.read = irongate_read_config,
.write = irongate_write_config,
};
int
irongate_pci_clr_err(void)
{
unsigned int nmi_ctl=0;
unsigned int IRONGATE_jd;
again:
IRONGATE_jd = IRONGATE0->stat_cmd;
printk("Iron stat_cmd %x\n", IRONGATE_jd);
IRONGATE0->stat_cmd = IRONGATE_jd; /* write again clears error bits */
mb();
IRONGATE_jd = IRONGATE0->stat_cmd; /* re-read to force write */
IRONGATE_jd = *IronECC;
printk("Iron ECC %x\n", IRONGATE_jd);
*IronECC = IRONGATE_jd; /* write again clears error bits */
mb();
IRONGATE_jd = *IronECC; /* re-read to force write */
/* Clear ALI NMI */
nmi_ctl = inb(0x61);
nmi_ctl |= 0x0c;
outb(nmi_ctl, 0x61);
nmi_ctl &= ~0x0c;
outb(nmi_ctl, 0x61);
IRONGATE_jd = *IronECC;
if (IRONGATE_jd & 0x300) goto again;
return 0;
}
#define IRONGATE_3GB 0xc0000000UL
/* On Albacore (aka UP1500) with 4Gb of RAM we have to reserve some
memory for PCI. At this point we just reserve memory above 3Gb. Most
of this memory will be freed after PCI setup is done. */
static void __init
albacore_init_arch(void)
{
unsigned long memtop = max_low_pfn << PAGE_SHIFT;
unsigned long pci_mem = (memtop + 0x1000000UL) & ~0xffffffUL;
struct percpu_struct *cpu;
int pal_rev, pal_var;
cpu = (struct percpu_struct*)((char*)hwrpb + hwrpb->processor_offset);
pal_rev = cpu->pal_revision & 0xffff;
pal_var = (cpu->pal_revision >> 16) & 0xff;
/* Consoles earlier than A5.6-18 (OSF PALcode v1.62-2) set up
the CPU incorrectly (leave speculative stores enabled),
which causes memory corruption under certain conditions.
Issue a warning for such consoles. */
if (alpha_using_srm &&
(pal_rev < 0x13e || (pal_rev == 0x13e && pal_var < 2)))
printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 "
"or later\n");
if (pci_mem > IRONGATE_3GB)
pci_mem = IRONGATE_3GB;
IRONGATE0->pci_mem = pci_mem;
alpha_mv.min_mem_address = pci_mem;
if (memtop > pci_mem) {
#ifdef CONFIG_BLK_DEV_INITRD
extern unsigned long initrd_start, initrd_end;
extern void *move_initrd(unsigned long);
/* Move the initrd out of the way. */
if (initrd_end && __pa(initrd_end) > pci_mem) {
unsigned long size;
size = initrd_end - initrd_start;
free_bootmem_node(NODE_DATA(0), __pa(initrd_start),
PAGE_ALIGN(size));
if (!move_initrd(pci_mem))
printk("irongate_init_arch: initrd too big "
"(%ldK)\ndisabling initrd\n",
size / 1024);
}
#endif
reserve_bootmem_node(NODE_DATA(0), pci_mem, memtop -
pci_mem, BOOTMEM_DEFAULT);
printk("irongate_init_arch: temporarily reserving "
"region %08lx-%08lx for PCI\n", pci_mem, memtop - 1);
}
}
static void __init
irongate_setup_agp(void)
{
/* Disable the GART window. AGPGART doesn't work due to yet
unresolved memory coherency issues... */
IRONGATE0->agpva = IRONGATE0->agpva & ~0xf;
alpha_agpgart_size = 0;
}
void __init
irongate_init_arch(void)
{
struct pci_controller *hose;
int amd761 = (IRONGATE0->dev_vendor >> 16) > 0x7006; /* Albacore? */
IronECC = amd761 ? &IRONGATE0->bacsr54_eccms761 : &IRONGATE0->dramms;
irongate_pci_clr_err();
if (amd761)
albacore_init_arch();
irongate_setup_agp();
/*
* Create our single hose.
*/
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
/* This is for userland consumption. For some reason, the 40-bit
PIO bias that we use in the kernel through KSEG didn't work for
the page table based user mappings. So make sure we get the
43-bit PIO bias. */
hose->sparse_mem_base = 0;
hose->sparse_io_base = 0;
hose->dense_mem_base
= (IRONGATE_MEM & 0xffffffffffUL) | 0x80000000000UL;
hose->dense_io_base
= (IRONGATE_IO & 0xffffffffffUL) | 0x80000000000UL;
hose->sg_isa = hose->sg_pci = NULL;
__direct_map_base = 0;
__direct_map_size = 0xffffffff;
}
/*
* IO map and AGP support
*/
#include <linux/vmalloc.h>
#include <linux/agp_backend.h>
#include <linux/agpgart.h>
#include <linux/export.h>
#include <asm/pgalloc.h>
#define GET_PAGE_DIR_OFF(addr) (addr >> 22)
#define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr))
#define GET_GATT_OFF(addr) ((addr & 0x003ff000) >> 12)
#define GET_GATT(addr) (gatt_pages[GET_PAGE_DIR_IDX(addr)])
void __iomem *
irongate_ioremap(unsigned long addr, unsigned long size)
{
struct vm_struct *area;
unsigned long vaddr;
unsigned long baddr, last;
u32 *mmio_regs, *gatt_pages, *cur_gatt, pte;
unsigned long gart_bus_addr;
if (!alpha_agpgart_size)
return (void __iomem *)(addr + IRONGATE_MEM);
gart_bus_addr = (unsigned long)IRONGATE0->bar0 &
PCI_BASE_ADDRESS_MEM_MASK;
/*
* Check for within the AGP aperture...
*/
do {
/*
* Check the AGP area
*/
if (addr >= gart_bus_addr && addr + size - 1 <
gart_bus_addr + alpha_agpgart_size)
break;
/*
* Not found - assume legacy ioremap
*/
return (void __iomem *)(addr + IRONGATE_MEM);
} while(0);
mmio_regs = (u32 *)(((unsigned long)IRONGATE0->bar1 &
PCI_BASE_ADDRESS_MEM_MASK) + IRONGATE_MEM);
gatt_pages = (u32 *)(phys_to_virt(mmio_regs[1])); /* FIXME */
/*
* Adjust the limits (mappings must be page aligned)
*/
if (addr & ~PAGE_MASK) {
printk("AGP ioremap failed... addr not page aligned (0x%lx)\n",
addr);
return (void __iomem *)(addr + IRONGATE_MEM);
}
last = addr + size - 1;
size = PAGE_ALIGN(last) - addr;
#if 0
printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size);
printk("irongate_ioremap: gart_bus_addr 0x%lx\n", gart_bus_addr);
printk("irongate_ioremap: gart_aper_size 0x%lx\n", gart_aper_size);
printk("irongate_ioremap: mmio_regs %p\n", mmio_regs);
printk("irongate_ioremap: gatt_pages %p\n", gatt_pages);
for(baddr = addr; baddr <= last; baddr += PAGE_SIZE)
{
cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
printk("irongate_ioremap: cur_gatt %p pte 0x%x\n",
cur_gatt, pte);
}
#endif
/*
* Map it
*/
area = get_vm_area(size, VM_IOREMAP);
if (!area) return NULL;
for(baddr = addr, vaddr = (unsigned long)area->addr;
baddr <= last;
baddr += PAGE_SIZE, vaddr += PAGE_SIZE)
{
cur_gatt = phys_to_virt(GET_GATT(baddr) & ~1);
pte = cur_gatt[GET_GATT_OFF(baddr)] & ~1;
if (__alpha_remap_area_pages(vaddr,
pte, PAGE_SIZE, 0)) {
printk("AGP ioremap: FAILED to map...\n");
vfree(area->addr);
return NULL;
}
}
flush_tlb_all();
vaddr = (unsigned long)area->addr + (addr & ~PAGE_MASK);
#if 0
printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n",
addr, size, vaddr);
#endif
return (void __iomem *)vaddr;
}
EXPORT_SYMBOL(irongate_ioremap);
void
irongate_iounmap(volatile void __iomem *xaddr)
{
unsigned long addr = (unsigned long) xaddr;
if (((long)addr >> 41) == -2)
return; /* kseg map, nothing to do */
if (addr)
return vfree((void *)(PAGE_MASK & addr));
}
EXPORT_SYMBOL(irongate_iounmap);