hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/include/linux/nvme.h

629 lines
14 KiB
C
Raw Normal View History

NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
/*
* Definitions for the NVM Express interface
NVMe: Update copyright headers Make the copyright dates accurate and remove the final paragraph that includes the address of the FSF. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2014-04-11 22:37:39 +08:00
* Copyright (c) 2011-2014, Intel Corporation.
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef _LINUX_NVME_H
#define _LINUX_NVME_H
nvme: include <linux/types.ĥ> in <linux/nvme.h> The buildbot complains about this even if it doesn't generate a a build warning. But it's an easy fix, so here we go: Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-10 00:19:20 +08:00
#include <linux/types.h>
nvme: use offset instead of a struct for registers This makes life easier for future non-PCI drivers where access to the registers might be more complicated. Note that Linux drivers are pretty evenly split between the two versions, and in fact the NVMe driver already uses offsets for the doorbells. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> [Fixed CMBSZ offset] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20 15:58:10 +08:00
enum {
NVME_REG_CAP = 0x0000, /* Controller Capabilities */
NVME_REG_VS = 0x0008, /* Version */
NVME_REG_INTMS = 0x000c, /* Interrupt Mask Set */
NVMe: correct comment for offset enum of controller registers in nvme.h Section 3.1 gives the comment for the offset of controller registers in the specification 1.2a. Some are mis-copied in the header file nvme.h. Correct them. Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-27 20:10:16 +08:00
NVME_REG_INTMC = 0x0010, /* Interrupt Mask Clear */
nvme: use offset instead of a struct for registers This makes life easier for future non-PCI drivers where access to the registers might be more complicated. Note that Linux drivers are pretty evenly split between the two versions, and in fact the NVMe driver already uses offsets for the doorbells. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> [Fixed CMBSZ offset] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20 15:58:10 +08:00
NVME_REG_CC = 0x0014, /* Controller Configuration */
NVME_REG_CSTS = 0x001c, /* Controller Status */
NVME_REG_NSSR = 0x0020, /* NVM Subsystem Reset */
NVME_REG_AQA = 0x0024, /* Admin Queue Attributes */
NVME_REG_ASQ = 0x0028, /* Admin SQ Base Address */
NVMe: correct comment for offset enum of controller registers in nvme.h Section 3.1 gives the comment for the offset of controller registers in the specification 1.2a. Some are mis-copied in the header file nvme.h. Correct them. Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-27 20:10:16 +08:00
NVME_REG_ACQ = 0x0030, /* Admin CQ Base Address */
nvme: use offset instead of a struct for registers This makes life easier for future non-PCI drivers where access to the registers might be more complicated. Note that Linux drivers are pretty evenly split between the two versions, and in fact the NVMe driver already uses offsets for the doorbells. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> [Fixed CMBSZ offset] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20 15:58:10 +08:00
NVME_REG_CMBLOC = 0x0038, /* Controller Memory Buffer Location */
NVME_REG_CMBSZ = 0x003c, /* Controller Memory Buffer Size */
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
};
NVMe: Do not set IO queue depth beyond device max Set the depth for IO queues to the device's maximum supported queue entries if the requested depth exceeds the device's capabilities. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-07-28 01:57:23 +08:00
#define NVME_CAP_MQES(cap) ((cap) & 0xffff)
NVMe: Time out initialisation after a few seconds THe device reports (in its capability register) how long it will take to initialise. If that time elapses before the ready bit becomes set, conclude the device is broken and refuse to initialise it. Log a nice error message so the user knows why we did nothing. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-04-20 03:04:20 +08:00
#define NVME_CAP_TIMEOUT(cap) (((cap) >> 24) & 0xff)
NVMe: Implement doorbell stride capability The doorbell stride allows devices to spread out their doorbells instead of packing them tightly. This feature was added as part of ECN 003. This patch also enables support for more than 512 queues :-) Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-10-21 05:00:41 +08:00
#define NVME_CAP_STRIDE(cap) (((cap) >> 32) & 0xf)
NVMe: Add nvme subsystem reset support Controllers part of an NVMe subsystem may be reset by any other controller in the subsystem. If the device is capable of subsystem resets, this patch adds detection for such events and performs appropriate controller initialization upon subsystem reset detection. The register bit is a RW1C type, so the driver needs to write a 1 to the status bit to clear the subsystem reset occured bit during initialization. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-11 05:20:40 +08:00
#define NVME_CAP_NSSRC(cap) (((cap) >> 36) & 0x1)
NVMe: Set block queue max sectors Set the max hw sectors in a namespace's request queue if the nvme device has a max data transfer size. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2012-07-27 01:29:57 +08:00
#define NVME_CAP_MPSMIN(cap) (((cap) >> 48) & 0xf)
NVMe: Mismatched host/device page size support Adds support for devices with max page size smaller than the host's. In the case we encounter such a host/device combination, the driver will split a page into as many PRP entries as necessary for the device's page size capabilities. If the device's reported minimum page size is greater than the host's, the driver will not attempt to enable the device and return an error instead. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-24 01:34:01 +08:00
#define NVME_CAP_MPSMAX(cap) (((cap) >> 52) & 0xf)
NVMe: Time out initialisation after a few seconds THe device reports (in its capability register) how long it will take to initialise. If that time elapses before the ready bit becomes set, conclude the device is broken and refuse to initialise it. Log a nice error message so the user knows why we did nothing. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-04-20 03:04:20 +08:00
NVMe: Use CMB for the IO SQes if available Some controllers have a controller-side memory buffer available for use for submissions, completions, lists, or data. If a CMB is available, the entire CMB will be ioremapped and it will attempt to map the IO SQes onto the CMB. The queues will be shrunk as needed. The CMB will not be used if the queue depth is shrunk below some threshold where it may have reduced performance over a larger queue in system memory. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-21 00:14:09 +08:00
#define NVME_CMB_BIR(cmbloc) ((cmbloc) & 0x7)
#define NVME_CMB_OFST(cmbloc) (((cmbloc) >> 12) & 0xfffff)
#define NVME_CMB_SZ(cmbsz) (((cmbsz) >> 12) & 0xfffff)
#define NVME_CMB_SZU(cmbsz) (((cmbsz) >> 8) & 0xf)
#define NVME_CMB_WDS(cmbsz) ((cmbsz) & 0x10)
#define NVME_CMB_RDS(cmbsz) ((cmbsz) & 0x8)
#define NVME_CMB_LISTS(cmbsz) ((cmbsz) & 0x4)
#define NVME_CMB_CQS(cmbsz) ((cmbsz) & 0x2)
#define NVME_CMB_SQS(cmbsz) ((cmbsz) & 0x1)
nvme.h: add NVM command set SQE/CQE size defines Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 05:20:45 +08:00
/*
* Submission and Completion Queue Entry Sizes for the NVM command set.
* (In bytes and specified as a power of two (2^n)).
*/
#define NVME_NVM_IOSQES 6
#define NVME_NVM_IOCQES 4
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
enum {
NVME_CC_ENABLE = 1 << 0,
NVME_CC_CSS_NVM = 0 << 4,
NVME_CC_MPS_SHIFT = 7,
NVME_CC_ARB_RR = 0 << 11,
NVME_CC_ARB_WRRU = 1 << 11,
NVMe: Correct the Controller Configuration settings The arbitration field was extended by one bit, shifting the shutdown notification bits by one. Also, the SQ/CQ entry size was made configurable for future extensions. Reported-by: Paul Luse <paul.e.luse@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-03-23 03:55:45 +08:00
NVME_CC_ARB_VS = 7 << 11,
NVME_CC_SHN_NONE = 0 << 14,
NVME_CC_SHN_NORMAL = 1 << 14,
NVME_CC_SHN_ABRUPT = 2 << 14,
NVMe: Use normal shutdown The NVMe spec recommends using the shutdown normal sequence when safely taking the controller offline instead of hitting CC.EN on the next start-up to reset the controller. The spec recommends a minimum of 1 second for the shutdown complete. This patch waits 2 seconds to be on the safe side. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-07-16 05:02:22 +08:00
NVME_CC_SHN_MASK = 3 << 14,
nvme.h: add NVM command set SQE/CQE size defines Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 05:20:45 +08:00
NVME_CC_IOSQES = NVME_NVM_IOSQES << 16,
NVME_CC_IOCQES = NVME_NVM_IOCQES << 20,
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
NVME_CSTS_RDY = 1 << 0,
NVME_CSTS_CFS = 1 << 1,
NVMe: Add nvme subsystem reset support Controllers part of an NVMe subsystem may be reset by any other controller in the subsystem. If the device is capable of subsystem resets, this patch adds detection for such events and performs appropriate controller initialization upon subsystem reset detection. The register bit is a RW1C type, so the driver needs to write a 1 to the status bit to clear the subsystem reset occured bit during initialization. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-11 05:20:40 +08:00
NVME_CSTS_NSSRO = 1 << 4,
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
NVME_CSTS_SHST_NORMAL = 0 << 2,
NVME_CSTS_SHST_OCCUR = 1 << 2,
NVME_CSTS_SHST_CMPLT = 2 << 2,
NVMe: Use normal shutdown The NVMe spec recommends using the shutdown normal sequence when safely taking the controller offline instead of hitting CC.EN on the next start-up to reset the controller. The spec recommends a minimum of 1 second for the shutdown complete. This patch waits 2 seconds to be on the safe side. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2013-07-16 05:02:22 +08:00
NVME_CSTS_SHST_MASK = 3 << 2,
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
};
nvme: move hardware structures out of the uapi version of nvme.h Currently all NVMe command and completion structures are exposed to userspace through the uapi version of nvme.h. They are not an ABI between the kernel and userspace, and will change in C-incompatible way for future versions of the spec. Move them to the kernel version of the file and rename the uapi header to nvme_ioctl.h so that userspace can easily detect the presence of the new clean header. Nvme-cli already carries a local copy of the header, so it won't be affected by this move. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-02 21:25:49 +08:00
struct nvme_id_power_state {
__le16 max_power; /* centiwatts */
__u8 rsvd2;
__u8 flags;
__le32 entry_lat; /* microseconds */
__le32 exit_lat; /* microseconds */
__u8 read_tput;
__u8 read_lat;
__u8 write_tput;
__u8 write_lat;
__le16 idle_power;
__u8 idle_scale;
__u8 rsvd19;
__le16 active_power;
__u8 active_work_scale;
__u8 rsvd23[9];
};
enum {
NVME_PS_FLAGS_MAX_POWER_SCALE = 1 << 0,
NVME_PS_FLAGS_NON_OP_STATE = 1 << 1,
};
struct nvme_id_ctrl {
__le16 vid;
__le16 ssvid;
char sn[20];
char mn[40];
char fr[8];
__u8 rab;
__u8 ieee[3];
__u8 mic;
__u8 mdts;
nvme.h: add missing nvme_id_ctrl endianess annotations Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-02 21:27:16 +08:00
__le16 cntlid;
__le32 ver;
nvme.h: add RTD3R, RTD3E and OAES fields These have been added in NVMe 1.2 and we'll need at least oaes for the NVMe target driver. Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 05:20:43 +08:00
__le32 rtd3r;
__le32 rtd3e;
__le32 oaes;
__u8 rsvd96[160];
nvme: move hardware structures out of the uapi version of nvme.h Currently all NVMe command and completion structures are exposed to userspace through the uapi version of nvme.h. They are not an ABI between the kernel and userspace, and will change in C-incompatible way for future versions of the spec. Move them to the kernel version of the file and rename the uapi header to nvme_ioctl.h so that userspace can easily detect the presence of the new clean header. Nvme-cli already carries a local copy of the header, so it won't be affected by this move. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-02 21:25:49 +08:00
__le16 oacs;
__u8 acl;
__u8 aerl;
__u8 frmw;
__u8 lpa;
__u8 elpe;
__u8 npss;
__u8 avscc;
__u8 apsta;
__le16 wctemp;
__le16 cctemp;
__u8 rsvd270[242];
__u8 sqes;
__u8 cqes;
__u8 rsvd514[2];
__le32 nn;
__le16 oncs;
__le16 fuses;
__u8 fna;
__u8 vwc;
__le16 awun;
__le16 awupf;
__u8 nvscc;
__u8 rsvd531;
__le16 acwu;
__u8 rsvd534[2];
__le32 sgls;
__u8 rsvd540[1508];
struct nvme_id_power_state psd[32];
__u8 vs[1024];
};
enum {
NVME_CTRL_ONCS_COMPARE = 1 << 0,
NVME_CTRL_ONCS_WRITE_UNCORRECTABLE = 1 << 1,
NVME_CTRL_ONCS_DSM = 1 << 2,
NVME_CTRL_VWC_PRESENT = 1 << 0,
};
struct nvme_lbaf {
__le16 ms;
__u8 ds;
__u8 rp;
};
struct nvme_id_ns {
__le64 nsze;
__le64 ncap;
__le64 nuse;
__u8 nsfeat;
__u8 nlbaf;
__u8 flbas;
__u8 mc;
__u8 dpc;
__u8 dps;
__u8 nmic;
__u8 rescap;
__u8 fpi;
__u8 rsvd33;
__le16 nawun;
__le16 nawupf;
__le16 nacwu;
__le16 nabsn;
__le16 nabo;
__le16 nabspf;
__u16 rsvd46;
__le64 nvmcap[2];
__u8 rsvd64[40];
__u8 nguid[16];
__u8 eui64[8];
struct nvme_lbaf lbaf[16];
__u8 rsvd192[192];
__u8 vs[3712];
};
enum {
NVME_NS_FEAT_THIN = 1 << 0,
NVME_NS_FLBAS_LBA_MASK = 0xf,
NVME_NS_FLBAS_META_EXT = 0x10,
NVME_LBAF_RP_BEST = 0,
NVME_LBAF_RP_BETTER = 1,
NVME_LBAF_RP_GOOD = 2,
NVME_LBAF_RP_DEGRADED = 3,
NVME_NS_DPC_PI_LAST = 1 << 4,
NVME_NS_DPC_PI_FIRST = 1 << 3,
NVME_NS_DPC_PI_TYPE3 = 1 << 2,
NVME_NS_DPC_PI_TYPE2 = 1 << 1,
NVME_NS_DPC_PI_TYPE1 = 1 << 0,
NVME_NS_DPS_PI_FIRST = 1 << 3,
NVME_NS_DPS_PI_MASK = 0x7,
NVME_NS_DPS_PI_TYPE1 = 1,
NVME_NS_DPS_PI_TYPE2 = 2,
NVME_NS_DPS_PI_TYPE3 = 3,
};
struct nvme_smart_log {
__u8 critical_warning;
__u8 temperature[2];
__u8 avail_spare;
__u8 spare_thresh;
__u8 percent_used;
__u8 rsvd6[26];
__u8 data_units_read[16];
__u8 data_units_written[16];
__u8 host_reads[16];
__u8 host_writes[16];
__u8 ctrl_busy_time[16];
__u8 power_cycles[16];
__u8 power_on_hours[16];
__u8 unsafe_shutdowns[16];
__u8 media_errors[16];
__u8 num_err_log_entries[16];
__le32 warning_temp_time;
__le32 critical_comp_time;
__le16 temp_sensor[8];
__u8 rsvd216[296];
};
enum {
NVME_SMART_CRIT_SPARE = 1 << 0,
NVME_SMART_CRIT_TEMPERATURE = 1 << 1,
NVME_SMART_CRIT_RELIABILITY = 1 << 2,
NVME_SMART_CRIT_MEDIA = 1 << 3,
NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4,
};
enum {
NVME_AER_NOTICE_NS_CHANGED = 0x0002,
};
struct nvme_lba_range_type {
__u8 type;
__u8 attributes;
__u8 rsvd2[14];
__u64 slba;
__u64 nlb;
__u8 guid[16];
__u8 rsvd48[16];
};
enum {
NVME_LBART_TYPE_FS = 0x01,
NVME_LBART_TYPE_RAID = 0x02,
NVME_LBART_TYPE_CACHE = 0x03,
NVME_LBART_TYPE_SWAP = 0x04,
NVME_LBART_ATTRIB_TEMP = 1 << 0,
NVME_LBART_ATTRIB_HIDE = 1 << 1,
};
struct nvme_reservation_status {
__le32 gen;
__u8 rtype;
__u8 regctl[2];
__u8 resv5[2];
__u8 ptpls;
__u8 resv10[13];
struct {
__le16 cntlid;
__u8 rcsts;
__u8 resv3[5];
__le64 hostid;
__le64 rkey;
} regctl_ds[];
};
/* I/O commands */
enum nvme_opcode {
nvme_cmd_flush = 0x00,
nvme_cmd_write = 0x01,
nvme_cmd_read = 0x02,
nvme_cmd_write_uncor = 0x04,
nvme_cmd_compare = 0x05,
nvme_cmd_write_zeroes = 0x08,
nvme_cmd_dsm = 0x09,
nvme_cmd_resv_register = 0x0d,
nvme_cmd_resv_report = 0x0e,
nvme_cmd_resv_acquire = 0x11,
nvme_cmd_resv_release = 0x15,
};
struct nvme_common_command {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__le32 cdw2[2];
__le64 metadata;
__le64 prp1;
__le64 prp2;
__le32 cdw10[6];
};
struct nvme_rw_command {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2;
__le64 metadata;
__le64 prp1;
__le64 prp2;
__le64 slba;
__le16 length;
__le16 control;
__le32 dsmgmt;
__le32 reftag;
__le16 apptag;
__le16 appmask;
};
enum {
NVME_RW_LR = 1 << 15,
NVME_RW_FUA = 1 << 14,
NVME_RW_DSM_FREQ_UNSPEC = 0,
NVME_RW_DSM_FREQ_TYPICAL = 1,
NVME_RW_DSM_FREQ_RARE = 2,
NVME_RW_DSM_FREQ_READS = 3,
NVME_RW_DSM_FREQ_WRITES = 4,
NVME_RW_DSM_FREQ_RW = 5,
NVME_RW_DSM_FREQ_ONCE = 6,
NVME_RW_DSM_FREQ_PREFETCH = 7,
NVME_RW_DSM_FREQ_TEMP = 8,
NVME_RW_DSM_LATENCY_NONE = 0 << 4,
NVME_RW_DSM_LATENCY_IDLE = 1 << 4,
NVME_RW_DSM_LATENCY_NORM = 2 << 4,
NVME_RW_DSM_LATENCY_LOW = 3 << 4,
NVME_RW_DSM_SEQ_REQ = 1 << 6,
NVME_RW_DSM_COMPRESSED = 1 << 7,
NVME_RW_PRINFO_PRCHK_REF = 1 << 10,
NVME_RW_PRINFO_PRCHK_APP = 1 << 11,
NVME_RW_PRINFO_PRCHK_GUARD = 1 << 12,
NVME_RW_PRINFO_PRACT = 1 << 13,
};
struct nvme_dsm_cmd {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2[2];
__le64 prp1;
__le64 prp2;
__le32 nr;
__le32 attributes;
__u32 rsvd12[4];
};
enum {
NVME_DSMGMT_IDR = 1 << 0,
NVME_DSMGMT_IDW = 1 << 1,
NVME_DSMGMT_AD = 1 << 2,
};
struct nvme_dsm_range {
__le32 cattr;
__le32 nlb;
__le64 slba;
};
/* Admin commands */
enum nvme_admin_opcode {
nvme_admin_delete_sq = 0x00,
nvme_admin_create_sq = 0x01,
nvme_admin_get_log_page = 0x02,
nvme_admin_delete_cq = 0x04,
nvme_admin_create_cq = 0x05,
nvme_admin_identify = 0x06,
nvme_admin_abort_cmd = 0x08,
nvme_admin_set_features = 0x09,
nvme_admin_get_features = 0x0a,
nvme_admin_async_event = 0x0c,
nvme_admin_activate_fw = 0x10,
nvme_admin_download_fw = 0x11,
nvme_admin_format_nvm = 0x80,
nvme_admin_security_send = 0x81,
nvme_admin_security_recv = 0x82,
};
enum {
NVME_QUEUE_PHYS_CONTIG = (1 << 0),
NVME_CQ_IRQ_ENABLED = (1 << 1),
NVME_SQ_PRIO_URGENT = (0 << 1),
NVME_SQ_PRIO_HIGH = (1 << 1),
NVME_SQ_PRIO_MEDIUM = (2 << 1),
NVME_SQ_PRIO_LOW = (3 << 1),
NVME_FEAT_ARBITRATION = 0x01,
NVME_FEAT_POWER_MGMT = 0x02,
NVME_FEAT_LBA_RANGE = 0x03,
NVME_FEAT_TEMP_THRESH = 0x04,
NVME_FEAT_ERR_RECOVERY = 0x05,
NVME_FEAT_VOLATILE_WC = 0x06,
NVME_FEAT_NUM_QUEUES = 0x07,
NVME_FEAT_IRQ_COALESCE = 0x08,
NVME_FEAT_IRQ_CONFIG = 0x09,
NVME_FEAT_WRITE_ATOMIC = 0x0a,
NVME_FEAT_ASYNC_EVENT = 0x0b,
NVME_FEAT_AUTO_PST = 0x0c,
NVME_FEAT_SW_PROGRESS = 0x80,
NVME_FEAT_HOST_ID = 0x81,
NVME_FEAT_RESV_MASK = 0x82,
NVME_FEAT_RESV_PERSIST = 0x83,
NVME_LOG_ERROR = 0x01,
NVME_LOG_SMART = 0x02,
NVME_LOG_FW_SLOT = 0x03,
NVME_LOG_RESERVATION = 0x80,
NVME_FWACT_REPL = (0 << 3),
NVME_FWACT_REPL_ACTV = (1 << 3),
NVME_FWACT_ACTV = (2 << 3),
};
struct nvme_identify {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2[2];
__le64 prp1;
__le64 prp2;
__le32 cns;
__u32 rsvd11[5];
};
struct nvme_features {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2[2];
__le64 prp1;
__le64 prp2;
__le32 fid;
__le32 dword11;
__u32 rsvd12[4];
};
struct nvme_create_cq {
__u8 opcode;
__u8 flags;
__u16 command_id;
__u32 rsvd1[5];
__le64 prp1;
__u64 rsvd8;
__le16 cqid;
__le16 qsize;
__le16 cq_flags;
__le16 irq_vector;
__u32 rsvd12[4];
};
struct nvme_create_sq {
__u8 opcode;
__u8 flags;
__u16 command_id;
__u32 rsvd1[5];
__le64 prp1;
__u64 rsvd8;
__le16 sqid;
__le16 qsize;
__le16 sq_flags;
__le16 cqid;
__u32 rsvd12[4];
};
struct nvme_delete_queue {
__u8 opcode;
__u8 flags;
__u16 command_id;
__u32 rsvd1[9];
__le16 qid;
__u16 rsvd10;
__u32 rsvd11[5];
};
struct nvme_abort_cmd {
__u8 opcode;
__u8 flags;
__u16 command_id;
__u32 rsvd1[9];
__le16 sqid;
__u16 cid;
__u32 rsvd11[5];
};
struct nvme_download_firmware {
__u8 opcode;
__u8 flags;
__u16 command_id;
__u32 rsvd1[5];
__le64 prp1;
__le64 prp2;
__le32 numd;
__le32 offset;
__u32 rsvd12[4];
};
struct nvme_format_cmd {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2[4];
__le32 cdw10;
__u32 rsvd11[5];
};
nvme.h: Add get_log_page command strucure Add get_log_page command structure and a corresponding entry in nvme_command union Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed--by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 05:20:44 +08:00
struct nvme_get_log_page_command {
__u8 opcode;
__u8 flags;
__u16 command_id;
__le32 nsid;
__u64 rsvd2[2];
__le64 prp1;
__le64 prp2;
__u8 lid;
__u8 rsvd10;
__le16 numdl;
__le16 numdu;
__u16 rsvd11;
__le32 lpol;
__le32 lpou;
__u32 rsvd14[2];
};
nvme: move hardware structures out of the uapi version of nvme.h Currently all NVMe command and completion structures are exposed to userspace through the uapi version of nvme.h. They are not an ABI between the kernel and userspace, and will change in C-incompatible way for future versions of the spec. Move them to the kernel version of the file and rename the uapi header to nvme_ioctl.h so that userspace can easily detect the presence of the new clean header. Nvme-cli already carries a local copy of the header, so it won't be affected by this move. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-02 21:25:49 +08:00
struct nvme_command {
union {
struct nvme_common_command common;
struct nvme_rw_command rw;
struct nvme_identify identify;
struct nvme_features features;
struct nvme_create_cq create_cq;
struct nvme_create_sq create_sq;
struct nvme_delete_queue delete_queue;
struct nvme_download_firmware dlfw;
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
struct nvme_abort_cmd abort;
nvme.h: Add get_log_page command strucure Add get_log_page command structure and a corresponding entry in nvme_command union Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed--by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 05:20:44 +08:00
struct nvme_get_log_page_command get_log_page;
nvme: move hardware structures out of the uapi version of nvme.h Currently all NVMe command and completion structures are exposed to userspace through the uapi version of nvme.h. They are not an ABI between the kernel and userspace, and will change in C-incompatible way for future versions of the spec. Move them to the kernel version of the file and rename the uapi header to nvme_ioctl.h so that userspace can easily detect the presence of the new clean header. Nvme-cli already carries a local copy of the header, so it won't be affected by this move. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-02 21:25:49 +08:00
};
};
enum {
NVME_SC_SUCCESS = 0x0,
NVME_SC_INVALID_OPCODE = 0x1,
NVME_SC_INVALID_FIELD = 0x2,
NVME_SC_CMDID_CONFLICT = 0x3,
NVME_SC_DATA_XFER_ERROR = 0x4,
NVME_SC_POWER_LOSS = 0x5,
NVME_SC_INTERNAL = 0x6,
NVME_SC_ABORT_REQ = 0x7,
NVME_SC_ABORT_QUEUE = 0x8,
NVME_SC_FUSED_FAIL = 0x9,
NVME_SC_FUSED_MISSING = 0xa,
NVME_SC_INVALID_NS = 0xb,
NVME_SC_CMD_SEQ_ERROR = 0xc,
NVME_SC_SGL_INVALID_LAST = 0xd,
NVME_SC_SGL_INVALID_COUNT = 0xe,
NVME_SC_SGL_INVALID_DATA = 0xf,
NVME_SC_SGL_INVALID_METADATA = 0x10,
NVME_SC_SGL_INVALID_TYPE = 0x11,
NVME_SC_LBA_RANGE = 0x80,
NVME_SC_CAP_EXCEEDED = 0x81,
NVME_SC_NS_NOT_READY = 0x82,
NVME_SC_RESERVATION_CONFLICT = 0x83,
NVME_SC_CQ_INVALID = 0x100,
NVME_SC_QID_INVALID = 0x101,
NVME_SC_QUEUE_SIZE = 0x102,
NVME_SC_ABORT_LIMIT = 0x103,
NVME_SC_ABORT_MISSING = 0x104,
NVME_SC_ASYNC_LIMIT = 0x105,
NVME_SC_FIRMWARE_SLOT = 0x106,
NVME_SC_FIRMWARE_IMAGE = 0x107,
NVME_SC_INVALID_VECTOR = 0x108,
NVME_SC_INVALID_LOG_PAGE = 0x109,
NVME_SC_INVALID_FORMAT = 0x10a,
NVME_SC_FIRMWARE_NEEDS_RESET = 0x10b,
NVME_SC_INVALID_QUEUE = 0x10c,
NVME_SC_FEATURE_NOT_SAVEABLE = 0x10d,
NVME_SC_FEATURE_NOT_CHANGEABLE = 0x10e,
NVME_SC_FEATURE_NOT_PER_NS = 0x10f,
NVME_SC_FW_NEEDS_RESET_SUBSYS = 0x110,
NVME_SC_BAD_ATTRIBUTES = 0x180,
NVME_SC_INVALID_PI = 0x181,
NVME_SC_READ_ONLY = 0x182,
NVME_SC_WRITE_FAULT = 0x280,
NVME_SC_READ_ERROR = 0x281,
NVME_SC_GUARD_CHECK = 0x282,
NVME_SC_APPTAG_CHECK = 0x283,
NVME_SC_REFTAG_CHECK = 0x284,
NVME_SC_COMPARE_FAILED = 0x285,
NVME_SC_ACCESS_DENIED = 0x286,
NVME_SC_DNR = 0x4000,
};
struct nvme_completion {
__le32 result; /* Used by admin commands to return data */
__u32 rsvd;
__le16 sq_head; /* how much of this queue may be reclaimed */
__le16 sq_id; /* submission queue that generated this entry */
__u16 command_id; /* of the command which completed */
__le16 status; /* did the command fail, and if so, why? */
};
#define NVME_VS(major, minor) (((major) << 16) | ((minor) << 8))
NVMe: New driver This driver is for devices that follow the NVM Express standard Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-01-21 01:50:14 +08:00
#endif /* _LINUX_NVME_H */