linux-sg2042/arch/blackfin/kernel/process.c

460 lines
11 KiB
C
Raw Normal View History

blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
/*
* File: arch/blackfin/kernel/process.c
* Based on:
* Author:
*
* Created:
* Description: Blackfin architecture-dependent process handling.
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see the file COPYING, or write
* to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <asm/blackfin.h>
#include <asm/uaccess.h>
#include <asm/fixed_code.h>
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
#define LED_ON 0
#define LED_OFF 1
asmlinkage void ret_from_fork(void);
/* Points to the SDRAM backup memory for the stack that is currently in
* L1 scratchpad memory.
*/
void *current_l1_stack_save;
/* The number of tasks currently using a L1 stack area. The SRAM is
* allocated/deallocated whenever this changes from/to zero.
*/
int nr_l1stack_tasks;
/* Start and length of the area in L1 scratchpad memory which we've allocated
* for process stacks.
*/
void *l1_stack_base;
unsigned long l1_stack_len;
/*
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void) = NULL;
EXPORT_SYMBOL(pm_idle);
void (*pm_power_off)(void) = NULL;
EXPORT_SYMBOL(pm_power_off);
/*
* We are using a different LED from the one used to indicate timer interrupt.
*/
#if defined(CONFIG_BFIN_IDLE_LED)
static inline void leds_switch(int flag)
{
unsigned short tmp = 0;
tmp = bfin_read_CONFIG_BFIN_IDLE_LED_PORT();
SSYNC();
if (flag == LED_ON)
tmp &= ~CONFIG_BFIN_IDLE_LED_PIN; /* light on */
else
tmp |= CONFIG_BFIN_IDLE_LED_PIN; /* light off */
bfin_write_CONFIG_BFIN_IDLE_LED_PORT(tmp);
SSYNC();
}
#else
static inline void leds_switch(int flag)
{
}
#endif
/*
* The idle loop on BFIN
*/
#ifdef CONFIG_IDLE_L1
void default_idle(void)__attribute__((l1_text));
void cpu_idle(void)__attribute__((l1_text));
#endif
void default_idle(void)
{
while (!need_resched()) {
leds_switch(LED_OFF);
local_irq_disable();
if (likely(!need_resched()))
idle_with_irq_disabled();
local_irq_enable();
leds_switch(LED_ON);
}
}
void (*idle)(void) = default_idle;
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
while (1) {
idle();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
void machine_restart(char *__unused)
{
#if defined(CONFIG_BLKFIN_CACHE)
bfin_write_IMEM_CONTROL(0x01);
SSYNC();
#endif
bfin_reset();
/* Dont do anything till the reset occurs */
while (1) {
SSYNC();
}
}
void machine_halt(void)
{
for (;;)
asm volatile ("idle");
}
void machine_power_off(void)
{
for (;;)
asm volatile ("idle");
}
void show_regs(struct pt_regs *regs)
{
printk(KERN_NOTICE "\n");
printk(KERN_NOTICE
"PC: %08lu Status: %04lu SysStatus: %04lu RETS: %08lu\n",
regs->pc, regs->astat, regs->seqstat, regs->rets);
printk(KERN_NOTICE
"A0.x: %08lx A0.w: %08lx A1.x: %08lx A1.w: %08lx\n",
regs->a0x, regs->a0w, regs->a1x, regs->a1w);
printk(KERN_NOTICE "P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n",
regs->p0, regs->p1, regs->p2, regs->p3);
printk(KERN_NOTICE "P4: %08lx P5: %08lx\n", regs->p4, regs->p5);
printk(KERN_NOTICE "R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n",
regs->r0, regs->r1, regs->r2, regs->r3);
printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
regs->r4, regs->r5, regs->r6, regs->r7);
if (!(regs->ipend))
printk("USP: %08lx\n", rdusp());
}
/* Fill in the fpu structure for a core dump. */
int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpregs)
{
return 1;
}
/*
* This gets run with P1 containing the
* function to call, and R1 containing
* the "args". Note P0 is clobbered on the way here.
*/
void kernel_thread_helper(void);
__asm__(".section .text\n"
".align 4\n"
"_kernel_thread_helper:\n\t"
"\tsp += -12;\n\t"
"\tr0 = r1;\n\t" "\tcall (p1);\n\t" "\tcall _do_exit;\n" ".previous");
/*
* Create a kernel thread.
*/
pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags)
{
struct pt_regs regs;
memset(&regs, 0, sizeof(regs));
regs.r1 = (unsigned long)arg;
regs.p1 = (unsigned long)fn;
regs.pc = (unsigned long)kernel_thread_helper;
regs.orig_p0 = -1;
/* Set bit 2 to tell ret_from_fork we should be returning to kernel
mode. */
regs.ipend = 0x8002;
__asm__ __volatile__("%0 = syscfg;":"=da"(regs.syscfg):);
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs, 0, NULL,
NULL);
}
void flush_thread(void)
{
}
asmlinkage int bfin_vfork(struct pt_regs *regs)
{
return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, rdusp(), regs, 0, NULL,
NULL);
}
asmlinkage int bfin_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
/* syscall2 puts clone_flags in r0 and usp in r1 */
clone_flags = regs->r0;
newsp = regs->r1;
if (!newsp)
newsp = rdusp();
else
newsp -= 12;
return do_fork(clone_flags, newsp, regs, 0, NULL, NULL);
}
int
copy_thread(int nr, unsigned long clone_flags,
unsigned long usp, unsigned long topstk,
struct task_struct *p, struct pt_regs *regs)
{
struct pt_regs *childregs;
childregs = (struct pt_regs *) (task_stack_page(p) + THREAD_SIZE) - 1;
*childregs = *regs;
childregs->r0 = 0;
p->thread.usp = usp;
p->thread.ksp = (unsigned long)childregs;
p->thread.pc = (unsigned long)ret_from_fork;
return 0;
}
/*
* fill in the user structure for a core dump..
*/
void dump_thread(struct pt_regs *regs, struct user *dump)
{
dump->magic = CMAGIC;
dump->start_code = 0;
dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
dump->u_dsize = ((unsigned long)(current->mm->brk +
(PAGE_SIZE - 1))) >> PAGE_SHIFT;
dump->u_dsize -= dump->u_tsize;
dump->u_ssize = 0;
if (dump->start_stack < TASK_SIZE)
dump->u_ssize =
((unsigned long)(TASK_SIZE -
dump->start_stack)) >> PAGE_SHIFT;
dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump);
dump->regs.r0 = regs->r0;
dump->regs.r1 = regs->r1;
dump->regs.r2 = regs->r2;
dump->regs.r3 = regs->r3;
dump->regs.r4 = regs->r4;
dump->regs.r5 = regs->r5;
dump->regs.r6 = regs->r6;
dump->regs.r7 = regs->r7;
dump->regs.p0 = regs->p0;
dump->regs.p1 = regs->p1;
dump->regs.p2 = regs->p2;
dump->regs.p3 = regs->p3;
dump->regs.p4 = regs->p4;
dump->regs.p5 = regs->p5;
dump->regs.orig_p0 = regs->orig_p0;
dump->regs.a0w = regs->a0w;
dump->regs.a1w = regs->a1w;
dump->regs.a0x = regs->a0x;
dump->regs.a1x = regs->a1x;
dump->regs.rets = regs->rets;
dump->regs.astat = regs->astat;
dump->regs.pc = regs->pc;
}
/*
* sys_execve() executes a new program.
*/
asmlinkage int sys_execve(char *name, char **argv, char **envp)
{
int error;
char *filename;
struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
lock_kernel();
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
error = do_execve(filename, argv, envp, regs);
putname(filename);
out:
unlock_kernel();
return error;
}
unsigned long get_wchan(struct task_struct *p)
{
unsigned long fp, pc;
unsigned long stack_page;
int count = 0;
if (!p || p == current || p->state == TASK_RUNNING)
return 0;
stack_page = (unsigned long)p;
fp = p->thread.usp;
do {
if (fp < stack_page + sizeof(struct thread_info) ||
fp >= 8184 + stack_page)
return 0;
pc = ((unsigned long *)fp)[1];
if (!in_sched_functions(pc))
return pc;
fp = *(unsigned long *)fp;
}
while (count++ < 16);
return 0;
}
void finish_atomic_sections (struct pt_regs *regs)
{
if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
return;
switch (regs->pc) {
case ATOMIC_XCHG32 + 2:
put_user(regs->r1, (int *)regs->p0);
regs->pc += 2;
break;
case ATOMIC_CAS32 + 2:
case ATOMIC_CAS32 + 4:
if (regs->r0 == regs->r1)
put_user(regs->r2, (int *)regs->p0);
regs->pc = ATOMIC_CAS32 + 8;
break;
case ATOMIC_CAS32 + 6:
put_user(regs->r2, (int *)regs->p0);
regs->pc += 2;
break;
case ATOMIC_ADD32 + 2:
regs->r0 = regs->r1 + regs->r0;
/* fall through */
case ATOMIC_ADD32 + 4:
put_user(regs->r0, (int *)regs->p0);
regs->pc = ATOMIC_ADD32 + 6;
break;
case ATOMIC_SUB32 + 2:
regs->r0 = regs->r1 - regs->r0;
/* fall through */
case ATOMIC_SUB32 + 4:
put_user(regs->r0, (int *)regs->p0);
regs->pc = ATOMIC_SUB32 + 6;
break;
case ATOMIC_IOR32 + 2:
regs->r0 = regs->r1 | regs->r0;
/* fall through */
case ATOMIC_IOR32 + 4:
put_user(regs->r0, (int *)regs->p0);
regs->pc = ATOMIC_IOR32 + 6;
break;
case ATOMIC_AND32 + 2:
regs->r0 = regs->r1 & regs->r0;
/* fall through */
case ATOMIC_AND32 + 4:
put_user(regs->r0, (int *)regs->p0);
regs->pc = ATOMIC_AND32 + 6;
break;
case ATOMIC_XOR32 + 2:
regs->r0 = regs->r1 ^ regs->r0;
/* fall through */
case ATOMIC_XOR32 + 4:
put_user(regs->r0, (int *)regs->p0);
regs->pc = ATOMIC_XOR32 + 6;
break;
}
}
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
#if defined(CONFIG_ACCESS_CHECK)
int _access_ok(unsigned long addr, unsigned long size)
{
if (addr > (addr + size))
return 0;
if (segment_eq(get_fs(),KERNEL_DS))
return 1;
#ifdef CONFIG_MTD_UCLINUX
if (addr >= memory_start && (addr + size) <= memory_end)
return 1;
if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
return 1;
#else
if (addr >= memory_start && (addr + size) <= physical_mem_end)
return 1;
#endif
if (addr >= (unsigned long)__init_begin &&
addr + size <= (unsigned long)__init_end)
return 1;
if (addr >= L1_SCRATCH_START
&& addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)
return 1;
#if L1_CODE_LENGTH != 0
if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1)
&& addr + size <= L1_CODE_START + L1_CODE_LENGTH)
return 1;
#endif
#if L1_DATA_A_LENGTH != 0
if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1)
&& addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)
return 1;
#endif
#if L1_DATA_B_LENGTH != 0
if (addr >= L1_DATA_B_START
&& addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)
return 1;
#endif
return 0;
}
EXPORT_SYMBOL(_access_ok);
#endif /* CONFIG_ACCESS_CHECK */