linux-sg2042/arch/x86/kernel/Makefile

107 lines
3.5 KiB
Makefile
Raw Normal View History

#
# Makefile for the linux kernel.
#
extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
#
# vsyscalls (which work on the user stack) should have
# no stack-protector checks:
#
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp)
CFLAGS_hpet.o := $(nostackp)
CFLAGS_tsc_64.o := $(nostackp)
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
obj-y += bootflag.o e820_$(BITS).o
obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
obj-y += alternative.o i8253.o pci-nommu.o
obj-$(CONFIG_X86_64) += bugs_64.o
obj-y += tsc_$(BITS).o io_delay.o rtc.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
obj-y += i387.o
obj-y += ptrace.o
obj-y += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_X86_SMP) += smp.o
obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o
obj-$(CONFIG_X86_32_SMP) += smpcommon.o
obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
ftrace: dynamic enabling/disabling of function calls This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-13 03:20:42 +08:00
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o
obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
obj-y += vsmp_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_ACPI_SRAT) += srat_32.o
obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_K8_NB) += k8.o
obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
obj-$(CONFIG_SCx200) += scx200.o
scx200-y += scx200_32.o
obj-$(CONFIG_OLPC) += olpc.o
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
x86: support for new UV apic UV supports really big systems. So big, in fact, that the APICID register does not contain enough bits to contain an APICID that is unique across all cpus. The UV BIOS supports 3 APICID modes: - legacy mode. This mode uses the old APIC mode where APICID is in bits [31:24] of the APICID register. - x2apic mode. This mode is whitebox-compatible. APICIDs are unique across all cpus. Standard x2apic APIC operations (Intel-defined) can be used for IPIs. The node identifier fits within the Intel-defined portion of the APICID register. - x2apic-uv mode. In this mode, the APICIDs on each node have unique IDs, but IDs on different node are not unique. For example, if each mode has 32 cpus, the APICIDs on each node might be 0 - 31. Every node has the same set of IDs. The UV hub is used to route IPIs/interrupts to the correct node. Traditional APIC operations WILL NOT WORK. In x2apic-uv mode, the ACPI tables all contain a full unique ID (note: exact bit layout still changing but the following is close): nnnnnnnnnnlc0cch n = unique node number l = socket number on board c = core h = hyperthread Only the "lc0cch" bits are written to the APICID register. The remaining bits are supplied by having the get_apic_id() function "OR" the extra bits into the value read from the APICID register. (Hmmm.. why not keep the ENTIRE APICID register in per-cpu data....) The x2apic-uv mode is recognized by the MADT table containing: oem_id = "SGI" oem_table_id = "UV-X" Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-29 03:12:16 +08:00
obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
obj-$(CONFIG_GART_IOMMU) += pci-gart_64.o aperture_64.o
obj-$(CONFIG_CALGARY_IOMMU) += pci-calgary_64.o tce_64.o
obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconf-fam10h_64.o
endif