linux-sg2042/include/net/tls.h

496 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (c) 2016-2017, Mellanox Technologies. All rights reserved.
* Copyright (c) 2016-2017, Dave Watson <davejwatson@fb.com>. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef _TLS_OFFLOAD_H
#define _TLS_OFFLOAD_H
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/crypto.h>
#include <linux/socket.h>
#include <linux/tcp.h>
#include <net/tcp.h>
#include <net/strparser.h>
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
#include <crypto/aead.h>
#include <uapi/linux/tls.h>
/* Maximum data size carried in a TLS record */
#define TLS_MAX_PAYLOAD_SIZE ((size_t)1 << 14)
#define TLS_HEADER_SIZE 5
#define TLS_NONCE_OFFSET TLS_HEADER_SIZE
#define TLS_CRYPTO_INFO_READY(info) ((info)->cipher_type)
#define TLS_RECORD_TYPE_DATA 0x17
#define TLS_AAD_SPACE_SIZE 13
#define TLS_DEVICE_NAME_MAX 32
/*
* This structure defines the routines for Inline TLS driver.
* The following routines are optional and filled with a
* null pointer if not defined.
*
* @name: Its the name of registered Inline tls device
* @dev_list: Inline tls device list
* int (*feature)(struct tls_device *device);
* Called to return Inline TLS driver capability
*
* int (*hash)(struct tls_device *device, struct sock *sk);
* This function sets Inline driver for listen and program
* device specific functioanlity as required
*
* void (*unhash)(struct tls_device *device, struct sock *sk);
* This function cleans listen state set by Inline TLS driver
*/
struct tls_device {
char name[TLS_DEVICE_NAME_MAX];
struct list_head dev_list;
int (*feature)(struct tls_device *device);
int (*hash)(struct tls_device *device, struct sock *sk);
void (*unhash)(struct tls_device *device, struct sock *sk);
};
enum {
TLS_BASE,
TLS_SW,
#ifdef CONFIG_TLS_DEVICE
TLS_HW,
#endif
TLS_HW_RECORD,
TLS_NUM_CONFIG,
};
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
/* TLS records are maintained in 'struct tls_rec'. It stores the memory pages
* allocated or mapped for each TLS record. After encryption, the records are
* stores in a linked list.
*/
struct tls_rec {
struct list_head list;
net/tls: Fixed race condition in async encryption On processors with multi-engine crypto accelerators, it is possible that multiple records get encrypted in parallel and their encryption completion is notified to different cpus in multicore processor. This leads to the situation where tls_encrypt_done() starts executing in parallel on different cores. In current implementation, encrypted records are queued to tx_ready_list in tls_encrypt_done(). This requires addition to linked list 'tx_ready_list' to be protected. As tls_decrypt_done() could be executing in irq content, it is not possible to protect linked list addition operation using a lock. To fix the problem, we remove linked list addition operation from the irq context. We do tx_ready_list addition/removal operation from application context only and get rid of possible multiple access to the linked list. Before starting encryption on the record, we add it to the tail of tx_ready_list. To prevent tls_tx_records() from transmitting it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'. When record encryption gets completed, tls_encrypt_done() has to only update the 'tx_ready' flag to true & linked list add operation is not required. The changed logic brings some other side benefits. Since the records are always submitted in tls sequence number order for encryption, the tx_ready_list always remains sorted and addition of new records to it does not have to traverse the linked list. Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to 'tx_list'. This is because now, the some of the records at the tail are not ready to transmit. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24 18:05:56 +08:00
int tx_ready;
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
int tx_flags;
/* AAD | sg_plaintext_data | sg_tag */
struct scatterlist sg_plaintext_data[MAX_SKB_FRAGS + 1];
/* AAD | sg_encrypted_data (data contain overhead for hdr&iv&tag) */
struct scatterlist sg_encrypted_data[MAX_SKB_FRAGS + 1];
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
unsigned int sg_plaintext_size;
unsigned int sg_encrypted_size;
int sg_plaintext_num_elem;
int sg_encrypted_num_elem;
char aad_space[TLS_AAD_SPACE_SIZE];
struct aead_request aead_req;
u8 aead_req_ctx[];
};
struct tx_work {
struct delayed_work work;
struct sock *sk;
};
struct tls_sw_context_tx {
struct crypto_aead *aead_send;
struct crypto_wait async_wait;
struct tx_work tx_work;
struct tls_rec *open_rec;
net/tls: Fixed race condition in async encryption On processors with multi-engine crypto accelerators, it is possible that multiple records get encrypted in parallel and their encryption completion is notified to different cpus in multicore processor. This leads to the situation where tls_encrypt_done() starts executing in parallel on different cores. In current implementation, encrypted records are queued to tx_ready_list in tls_encrypt_done(). This requires addition to linked list 'tx_ready_list' to be protected. As tls_decrypt_done() could be executing in irq content, it is not possible to protect linked list addition operation using a lock. To fix the problem, we remove linked list addition operation from the irq context. We do tx_ready_list addition/removal operation from application context only and get rid of possible multiple access to the linked list. Before starting encryption on the record, we add it to the tail of tx_ready_list. To prevent tls_tx_records() from transmitting it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'. When record encryption gets completed, tls_encrypt_done() has to only update the 'tx_ready' flag to true & linked list add operation is not required. The changed logic brings some other side benefits. Since the records are always submitted in tls sequence number order for encryption, the tx_ready_list always remains sorted and addition of new records to it does not have to traverse the linked list. Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to 'tx_list'. This is because now, the some of the records at the tail are not ready to transmit. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24 18:05:56 +08:00
struct list_head tx_list;
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
atomic_t encrypt_pending;
int async_notify;
#define BIT_TX_SCHEDULED 0
unsigned long tx_bitmask;
};
struct tls_sw_context_rx {
struct crypto_aead *aead_recv;
struct crypto_wait async_wait;
struct strparser strp;
void (*saved_data_ready)(struct sock *sk);
unsigned int (*sk_poll)(struct file *file, struct socket *sock,
struct poll_table_struct *wait);
struct sk_buff *recv_pkt;
u8 control;
bool decrypted;
net/tls: Add support for async decryption of tls records When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29 17:56:55 +08:00
atomic_t decrypt_pending;
bool async_notify;
};
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
struct tls_record_info {
struct list_head list;
u32 end_seq;
int len;
int num_frags;
skb_frag_t frags[MAX_SKB_FRAGS];
};
struct tls_offload_context_tx {
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
struct crypto_aead *aead_send;
spinlock_t lock; /* protects records list */
struct list_head records_list;
struct tls_record_info *open_record;
struct tls_record_info *retransmit_hint;
u64 hint_record_sn;
u64 unacked_record_sn;
struct scatterlist sg_tx_data[MAX_SKB_FRAGS];
void (*sk_destruct)(struct sock *sk);
u8 driver_state[];
/* The TLS layer reserves room for driver specific state
* Currently the belief is that there is not enough
* driver specific state to justify another layer of indirection
*/
#define TLS_DRIVER_STATE_SIZE (max_t(size_t, 8, sizeof(void *)))
};
#define TLS_OFFLOAD_CONTEXT_SIZE_TX \
(ALIGN(sizeof(struct tls_offload_context_tx), sizeof(void *)) + \
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
TLS_DRIVER_STATE_SIZE)
enum {
TLS_PENDING_CLOSED_RECORD
};
struct cipher_context {
u16 prepend_size;
u16 tag_size;
u16 overhead_size;
u16 iv_size;
char *iv;
u16 rec_seq_size;
char *rec_seq;
};
union tls_crypto_context {
struct tls_crypto_info info;
struct tls12_crypto_info_aes_gcm_128 aes_gcm_128;
};
struct tls_context {
union tls_crypto_context crypto_send;
union tls_crypto_context crypto_recv;
struct list_head list;
struct net_device *netdev;
refcount_t refcount;
void *priv_ctx_tx;
void *priv_ctx_rx;
u8 tx_conf:3;
u8 rx_conf:3;
struct cipher_context tx;
struct cipher_context rx;
struct scatterlist *partially_sent_record;
u16 partially_sent_offset;
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
unsigned long flags;
bool in_tcp_sendpages;
u16 pending_open_record_frags;
int (*push_pending_record)(struct sock *sk, int flags);
void (*sk_write_space)(struct sock *sk);
void (*sk_destruct)(struct sock *sk);
void (*sk_proto_close)(struct sock *sk, long timeout);
int (*setsockopt)(struct sock *sk, int level,
int optname, char __user *optval,
unsigned int optlen);
int (*getsockopt)(struct sock *sk, int level,
int optname, char __user *optval,
int __user *optlen);
int (*hash)(struct sock *sk);
void (*unhash)(struct sock *sk);
};
struct tls_offload_context_rx {
/* sw must be the first member of tls_offload_context_rx */
struct tls_sw_context_rx sw;
atomic64_t resync_req;
u8 driver_state[];
/* The TLS layer reserves room for driver specific state
* Currently the belief is that there is not enough
* driver specific state to justify another layer of indirection
*/
};
#define TLS_OFFLOAD_CONTEXT_SIZE_RX \
(ALIGN(sizeof(struct tls_offload_context_rx), sizeof(void *)) + \
TLS_DRIVER_STATE_SIZE)
int wait_on_pending_writer(struct sock *sk, long *timeo);
int tls_sk_query(struct sock *sk, int optname, char __user *optval,
int __user *optlen);
int tls_sk_attach(struct sock *sk, int optname, char __user *optval,
unsigned int optlen);
int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx);
int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size);
int tls_sw_sendpage(struct sock *sk, struct page *page,
int offset, size_t size, int flags);
void tls_sw_close(struct sock *sk, long timeout);
void tls_sw_free_resources_tx(struct sock *sk);
void tls_sw_free_resources_rx(struct sock *sk);
void tls_sw_release_resources_rx(struct sock *sk);
int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
int nonblock, int flags, int *addr_len);
unsigned int tls_sw_poll(struct file *file, struct socket *sock,
struct poll_table_struct *wait);
ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos,
struct pipe_inode_info *pipe,
size_t len, unsigned int flags);
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
int tls_set_device_offload(struct sock *sk, struct tls_context *ctx);
int tls_device_sendmsg(struct sock *sk, struct msghdr *msg, size_t size);
int tls_device_sendpage(struct sock *sk, struct page *page,
int offset, size_t size, int flags);
void tls_device_sk_destruct(struct sock *sk);
void tls_device_init(void);
void tls_device_cleanup(void);
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
int tls_tx_records(struct sock *sk, int flags);
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
struct tls_record_info *tls_get_record(struct tls_offload_context_tx *context,
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
u32 seq, u64 *p_record_sn);
static inline bool tls_record_is_start_marker(struct tls_record_info *rec)
{
return rec->len == 0;
}
static inline u32 tls_record_start_seq(struct tls_record_info *rec)
{
return rec->end_seq - rec->len;
}
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
void tls_sk_destruct(struct sock *sk, struct tls_context *ctx);
int tls_push_sg(struct sock *sk, struct tls_context *ctx,
struct scatterlist *sg, u16 first_offset,
int flags);
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
int tls_push_partial_record(struct sock *sk, struct tls_context *ctx,
int flags);
int tls_push_pending_closed_record(struct sock *sk, struct tls_context *ctx,
int flags, long *timeo);
static inline bool tls_is_pending_closed_record(struct tls_context *ctx)
{
return test_bit(TLS_PENDING_CLOSED_RECORD, &ctx->flags);
}
static inline int tls_complete_pending_work(struct sock *sk,
struct tls_context *ctx,
int flags, long *timeo)
{
int rc = 0;
if (unlikely(sk->sk_write_pending))
rc = wait_on_pending_writer(sk, timeo);
if (!rc && tls_is_pending_closed_record(ctx))
rc = tls_push_pending_closed_record(sk, ctx, flags, timeo);
return rc;
}
static inline bool tls_is_partially_sent_record(struct tls_context *ctx)
{
return !!ctx->partially_sent_record;
}
static inline bool tls_is_pending_open_record(struct tls_context *tls_ctx)
{
return tls_ctx->pending_open_record_frags;
}
net/tls: Fixed race condition in async encryption On processors with multi-engine crypto accelerators, it is possible that multiple records get encrypted in parallel and their encryption completion is notified to different cpus in multicore processor. This leads to the situation where tls_encrypt_done() starts executing in parallel on different cores. In current implementation, encrypted records are queued to tx_ready_list in tls_encrypt_done(). This requires addition to linked list 'tx_ready_list' to be protected. As tls_decrypt_done() could be executing in irq content, it is not possible to protect linked list addition operation using a lock. To fix the problem, we remove linked list addition operation from the irq context. We do tx_ready_list addition/removal operation from application context only and get rid of possible multiple access to the linked list. Before starting encryption on the record, we add it to the tail of tx_ready_list. To prevent tls_tx_records() from transmitting it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'. When record encryption gets completed, tls_encrypt_done() has to only update the 'tx_ready' flag to true & linked list add operation is not required. The changed logic brings some other side benefits. Since the records are always submitted in tls sequence number order for encryption, the tx_ready_list always remains sorted and addition of new records to it does not have to traverse the linked list. Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to 'tx_list'. This is because now, the some of the records at the tail are not ready to transmit. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24 18:05:56 +08:00
static inline bool is_tx_ready(struct tls_sw_context_tx *ctx)
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
{
struct tls_rec *rec;
net/tls: Fixed race condition in async encryption On processors with multi-engine crypto accelerators, it is possible that multiple records get encrypted in parallel and their encryption completion is notified to different cpus in multicore processor. This leads to the situation where tls_encrypt_done() starts executing in parallel on different cores. In current implementation, encrypted records are queued to tx_ready_list in tls_encrypt_done(). This requires addition to linked list 'tx_ready_list' to be protected. As tls_decrypt_done() could be executing in irq content, it is not possible to protect linked list addition operation using a lock. To fix the problem, we remove linked list addition operation from the irq context. We do tx_ready_list addition/removal operation from application context only and get rid of possible multiple access to the linked list. Before starting encryption on the record, we add it to the tail of tx_ready_list. To prevent tls_tx_records() from transmitting it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'. When record encryption gets completed, tls_encrypt_done() has to only update the 'tx_ready' flag to true & linked list add operation is not required. The changed logic brings some other side benefits. Since the records are always submitted in tls sequence number order for encryption, the tx_ready_list always remains sorted and addition of new records to it does not have to traverse the linked list. Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to 'tx_list'. This is because now, the some of the records at the tail are not ready to transmit. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24 18:05:56 +08:00
rec = list_first_entry(&ctx->tx_list, struct tls_rec, list);
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
if (!rec)
return false;
net/tls: Fixed race condition in async encryption On processors with multi-engine crypto accelerators, it is possible that multiple records get encrypted in parallel and their encryption completion is notified to different cpus in multicore processor. This leads to the situation where tls_encrypt_done() starts executing in parallel on different cores. In current implementation, encrypted records are queued to tx_ready_list in tls_encrypt_done(). This requires addition to linked list 'tx_ready_list' to be protected. As tls_decrypt_done() could be executing in irq content, it is not possible to protect linked list addition operation using a lock. To fix the problem, we remove linked list addition operation from the irq context. We do tx_ready_list addition/removal operation from application context only and get rid of possible multiple access to the linked list. Before starting encryption on the record, we add it to the tail of tx_ready_list. To prevent tls_tx_records() from transmitting it, we mark the record with a new flag 'tx_ready' in 'struct tls_rec'. When record encryption gets completed, tls_encrypt_done() has to only update the 'tx_ready' flag to true & linked list add operation is not required. The changed logic brings some other side benefits. Since the records are always submitted in tls sequence number order for encryption, the tx_ready_list always remains sorted and addition of new records to it does not have to traverse the linked list. Lastly, we renamed tx_ready_list in 'struct tls_sw_context_tx' to 'tx_list'. This is because now, the some of the records at the tail are not ready to transmit. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption") Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24 18:05:56 +08:00
return READ_ONCE(rec->tx_ready);
net/tls: Add support for async encryption of records for performance In current implementation, tls records are encrypted & transmitted serially. Till the time the previously submitted user data is encrypted, the implementation waits and on finish starts transmitting the record. This approach of encrypt-one record at a time is inefficient when asynchronous crypto accelerators are used. For each record, there are overheads of interrupts, driver softIRQ scheduling etc. Also the crypto accelerator sits idle most of time while an encrypted record's pages are handed over to tcp stack for transmission. This patch enables encryption of multiple records in parallel when an async capable crypto accelerator is present in system. This is achieved by allowing the user space application to send more data using sendmsg() even while previously issued data is being processed by crypto accelerator. This requires returning the control back to user space application after submitting encryption request to accelerator. This also means that zero-copy mode of encryption cannot be used with async accelerator as we must be done with user space application buffer before returning from sendmsg(). There can be multiple records in flight to/from the accelerator. Each of the record is represented by 'struct tls_rec'. This is used to store the memory pages for the record. After the records are encrypted, they are added in a linked list called tx_ready_list which contains encrypted tls records sorted as per tls sequence number. The records from tx_ready_list are transmitted using a newly introduced function called tls_tx_records(). The tx_ready_list is polled for any record ready to be transmitted in sendmsg(), sendpage() after initiating encryption of new tls records. This achieves parallel encryption and transmission of records when async accelerator is present. There could be situation when crypto accelerator completes encryption later than polling of tx_ready_list by sendmsg()/sendpage(). Therefore we need a deferred work context to be able to transmit records from tx_ready_list. The deferred work context gets scheduled if applications are not sending much data through the socket. If the applications issue sendmsg()/sendpage() in quick succession, then the scheduling of tx_work_handler gets cancelled as the tx_ready_list would be polled from application's context itself. This saves scheduling overhead of deferred work. The patch also brings some side benefit. We are able to get rid of the concept of CLOSED record. This is because the records once closed are either encrypted and then placed into tx_ready_list or if encryption fails, the socket error is set. This simplifies the kernel tls sendpath. However since tls_device.c is still using macros, accessory functions for CLOSED records have been retained. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21 12:16:13 +08:00
}
struct sk_buff *
tls_validate_xmit_skb(struct sock *sk, struct net_device *dev,
struct sk_buff *skb);
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
static inline bool tls_is_sk_tx_device_offloaded(struct sock *sk)
{
#ifdef CONFIG_SOCK_VALIDATE_XMIT
return sk_fullsock(sk) &
(smp_load_acquire(&sk->sk_validate_xmit_skb) ==
&tls_validate_xmit_skb);
#else
return false;
#endif
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
}
static inline void tls_err_abort(struct sock *sk, int err)
{
sk->sk_err = err;
sk->sk_error_report(sk);
}
static inline bool tls_bigint_increment(unsigned char *seq, int len)
{
int i;
for (i = len - 1; i >= 0; i--) {
++seq[i];
if (seq[i] != 0)
break;
}
return (i == -1);
}
static inline void tls_advance_record_sn(struct sock *sk,
struct cipher_context *ctx)
{
if (tls_bigint_increment(ctx->rec_seq, ctx->rec_seq_size))
tls_err_abort(sk, EBADMSG);
tls_bigint_increment(ctx->iv + TLS_CIPHER_AES_GCM_128_SALT_SIZE,
ctx->iv_size);
}
static inline void tls_fill_prepend(struct tls_context *ctx,
char *buf,
size_t plaintext_len,
unsigned char record_type)
{
size_t pkt_len, iv_size = ctx->tx.iv_size;
pkt_len = plaintext_len + iv_size + ctx->tx.tag_size;
/* we cover nonce explicit here as well, so buf should be of
* size KTLS_DTLS_HEADER_SIZE + KTLS_DTLS_NONCE_EXPLICIT_SIZE
*/
buf[0] = record_type;
buf[1] = TLS_VERSION_MINOR(ctx->crypto_send.info.version);
buf[2] = TLS_VERSION_MAJOR(ctx->crypto_send.info.version);
/* we can use IV for nonce explicit according to spec */
buf[3] = pkt_len >> 8;
buf[4] = pkt_len & 0xFF;
memcpy(buf + TLS_NONCE_OFFSET,
ctx->tx.iv + TLS_CIPHER_AES_GCM_128_SALT_SIZE, iv_size);
}
static inline void tls_make_aad(char *buf,
size_t size,
char *record_sequence,
int record_sequence_size,
unsigned char record_type)
{
memcpy(buf, record_sequence, record_sequence_size);
buf[8] = record_type;
buf[9] = TLS_1_2_VERSION_MAJOR;
buf[10] = TLS_1_2_VERSION_MINOR;
buf[11] = size >> 8;
buf[12] = size & 0xFF;
}
static inline struct tls_context *tls_get_ctx(const struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
return icsk->icsk_ulp_data;
}
static inline struct tls_sw_context_rx *tls_sw_ctx_rx(
const struct tls_context *tls_ctx)
{
return (struct tls_sw_context_rx *)tls_ctx->priv_ctx_rx;
}
static inline struct tls_sw_context_tx *tls_sw_ctx_tx(
const struct tls_context *tls_ctx)
{
return (struct tls_sw_context_tx *)tls_ctx->priv_ctx_tx;
}
static inline struct tls_offload_context_tx *
tls_offload_ctx_tx(const struct tls_context *tls_ctx)
{
return (struct tls_offload_context_tx *)tls_ctx->priv_ctx_tx;
}
static inline struct tls_offload_context_rx *
tls_offload_ctx_rx(const struct tls_context *tls_ctx)
{
return (struct tls_offload_context_rx *)tls_ctx->priv_ctx_rx;
}
/* The TLS context is valid until sk_destruct is called */
static inline void tls_offload_rx_resync_request(struct sock *sk, __be32 seq)
{
struct tls_context *tls_ctx = tls_get_ctx(sk);
struct tls_offload_context_rx *rx_ctx = tls_offload_ctx_rx(tls_ctx);
atomic64_set(&rx_ctx->resync_req, ((((uint64_t)seq) << 32) | 1));
}
int tls_proccess_cmsg(struct sock *sk, struct msghdr *msg,
unsigned char *record_type);
void tls_register_device(struct tls_device *device);
void tls_unregister_device(struct tls_device *device);
int tls_device_decrypted(struct sock *sk, struct sk_buff *skb);
int decrypt_skb(struct sock *sk, struct sk_buff *skb,
struct scatterlist *sgout);
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
struct sk_buff *tls_validate_xmit_skb(struct sock *sk,
struct net_device *dev,
struct sk_buff *skb);
int tls_sw_fallback_init(struct sock *sk,
struct tls_offload_context_tx *offload_ctx,
net/tls: Add generic NIC offload infrastructure This patch adds a generic infrastructure to offload TLS crypto to a network device. It enables the kernel TLS socket to skip encryption and authentication operations on the transmit side of the data path. Leaving those computationally expensive operations to the NIC. The NIC offload infrastructure builds TLS records and pushes them to the TCP layer just like the SW KTLS implementation and using the same API. TCP segmentation is mostly unaffected. Currently the only exception is that we prevent mixed SKBs where only part of the payload requires offload. In the future we are likely to add a similar restriction following a change cipher spec record. The notable differences between SW KTLS and NIC offloaded TLS implementations are as follows: 1. The offloaded implementation builds "plaintext TLS record", those records contain plaintext instead of ciphertext and place holder bytes instead of authentication tags. 2. The offloaded implementation maintains a mapping from TCP sequence number to TLS records. Thus given a TCP SKB sent from a NIC offloaded TLS socket, we can use the tls NIC offload infrastructure to obtain enough context to encrypt the payload of the SKB. A TLS record is released when the last byte of the record is ack'ed, this is done through the new icsk_clean_acked callback. The infrastructure should be extendable to support various NIC offload implementations. However it is currently written with the implementation below in mind: The NIC assumes that packets from each offloaded stream are sent as plaintext and in-order. It keeps track of the TLS records in the TCP stream. When a packet marked for offload is transmitted, the NIC encrypts the payload in-place and puts authentication tags in the relevant place holders. The responsibility for handling out-of-order packets (i.e. TCP retransmission, qdisc drops) falls on the netdev driver. The netdev driver keeps track of the expected TCP SN from the NIC's perspective. If the next packet to transmit matches the expected TCP SN, the driver advances the expected TCP SN, and transmits the packet with TLS offload indication. If the next packet to transmit does not match the expected TCP SN. The driver calls the TLS layer to obtain the TLS record that includes the TCP of the packet for transmission. Using this TLS record, the driver posts a work entry on the transmit queue to reconstruct the NIC TLS state required for the offload of the out-of-order packet. It updates the expected TCP SN accordingly and transmits the now in-order packet. The same queue is used for packet transmission and TLS context reconstruction to avoid the need for flushing the transmit queue before issuing the context reconstruction request. Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30 15:16:16 +08:00
struct tls_crypto_info *crypto_info);
int tls_set_device_offload_rx(struct sock *sk, struct tls_context *ctx);
void tls_device_offload_cleanup_rx(struct sock *sk);
void handle_device_resync(struct sock *sk, u32 seq, u64 rcd_sn);
#endif /* _TLS_OFFLOAD_H */