hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/hid/Makefile

122 lines
4.7 KiB
Makefile
Raw Normal View History

[PATCH] Generic HID layer - build This modifies Makefiles and Kconfigs to properly reflect the creation of generic HID layer. It also removes the dependency of BROKEN, which was introduced by the first patch in series (see the comment). Also updates credits. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-09 01:41:30 +08:00
#
# Makefile for the HID driver
#
HID: Clean up makefile (-y instead of -objs) Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 17:42:30 +08:00
hid-y := hid-core.o hid-input.o
HID: Use Kbuild idiom in Makefiles Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-21 21:07:10 +08:00
hid-$(CONFIG_DEBUG_FS) += hid-debug.o
HID: use debugfs for report dumping descriptor It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 21:20:55 +08:00
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 18:43:31 +08:00
obj-$(CONFIG_HID) += hid.o
HID: uhid: introduce user-space I/O driver support for HID This adds a dummy driver that will support user-space I/O drivers for the HID subsystem. This allows to write transport-level drivers like USB-HID and Bluetooth-HID in user-space. Low-Energy Bluetooth needs this to feed HID data that is parsed in user-space back into the kernel. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-10 21:16:13 +08:00
obj-$(CONFIG_UHID) += uhid.o
HID: add hidraw interface hidraw is an interface that is going to obsolete hiddev one day. Many userland applications are using libusb instead of using kernel-provided hiddev interface. This is caused by various reasons - the HID parser in kernel doesn't handle all the HID hardware on the planet properly, some devices might require its own specific quirks/drivers, etc. hiddev interface tries to do its best to parse all the received reports properly, and presents only parsed usages into userspace. This is however often not enough, and that's the reason why many userland applications just don't use hiddev at all, and rather use libusb to read raw USB events and process them on their own. Another drawback of hiddev is that it is USB-specific. hidraw interface provides userspace readers with really raw HID reports, no matter what the low-level transport layer is (USB/BT), and gives the userland applications all the freedom to process the HID reports in a way they wish to. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-14 15:57:40 +08:00
HID: Create a common generic driver Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23 18:07:07 +08:00
obj-$(CONFIG_HID_GENERIC) += hid-generic.o
HID: add hidraw interface hidraw is an interface that is going to obsolete hiddev one day. Many userland applications are using libusb instead of using kernel-provided hiddev interface. This is caused by various reasons - the HID parser in kernel doesn't handle all the HID hardware on the planet properly, some devices might require its own specific quirks/drivers, etc. hiddev interface tries to do its best to parse all the received reports properly, and presents only parsed usages into userspace. This is however often not enough, and that's the reason why many userland applications just don't use hiddev at all, and rather use libusb to read raw USB events and process them on their own. Another drawback of hiddev is that it is USB-specific. hidraw interface provides userspace readers with really raw HID reports, no matter what the low-level transport layer is (USB/BT), and gives the userland applications all the freedom to process the HID reports in a way they wish to. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-05-14 15:57:40 +08:00
hid-$(CONFIG_HIDRAW) += hidraw.o
HID: hid debug from hid-debug.h to hid layer hid-debug.h contains a lot of code, and should not therefore be a header. This patch moves the code to generic hid layer as .c source, and introduces CONFIG_HID_DEBUG to conditionally compile it, instead of playing with #define DEBUG and including hid-debug.h. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-01-25 18:43:31 +08:00
HID: Clean up makefile (-y instead of -objs) Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and should now be switched. According to (documentation/kbuild/makefiles.txt). Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-18 17:42:30 +08:00
hid-logitech-y := hid-lg.o
HID: Use Kbuild idiom in Makefiles Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-21 21:07:10 +08:00
hid-logitech-$(CONFIG_LOGITECH_FF) += hid-lgff.o
hid-logitech-$(CONFIG_LOGIRUMBLEPAD2_FF) += hid-lg2ff.o
hid-logitech-$(CONFIG_LOGIG940_FF) += hid-lg3ff.o
hid-logitech-$(CONFIG_LOGIWHEELS_FF) += hid-lg4ff.o
HID: move logitech FF processing Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-05 05:06:45 +08:00
HID: wiimote: add sub-device module infrastructure To avoid loading all sub-device drivers for every Wii Remote, even though the required hardware might not be available, we introduce a module layer. The module layer specifies which sub-devices are available on each device-type. After device detection, we only load the modules for the detected device. If module loading fails, we unload everything and mark the device as WIIMOTE_DEV_UNKNOWN. As long as a device is marked as "unknown", no sub-devices will be used and the device is considered unsupported. All the different sub-devices, including KEYS, RUMBLE, BATTERY, LEDS, ACCELEROMETER, IR and more will be ported in follow-up patches to the new module layer. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-06 05:12:51 +08:00
hid-wiimote-y := hid-wiimote-core.o hid-wiimote-modules.o
HID: Use Kbuild idiom in Makefiles Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-21 21:07:10 +08:00
hid-wiimote-$(CONFIG_DEBUG_FS) += hid-wiimote-debug.o
HID: wiimote: Rename driver to allow multiple source files Extension and sound support for the wiimote are quite complex and will be implemented in separate source files. Hence rename the current driver to "-core" suffix so multiple files can be linked into this module. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-17 21:11:58 +08:00
HID: move a4tech quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-24 05:31:09 +08:00
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
HID: Accutouch: Add driver for ELO Accutouch 2216 USB Touchscreens The Accutouch 2216 is reporting BTN_LEFT/BTN_MOUSE rather than BTM_TOUCH in it's capabilities, which is what user space expects a touchscreen device to report. This is causing udev to consider the device to be a "VMware's USB mouse" rather than as a touchscreen, which results in a mouse cursor being displayed in Weston. This patch adds a special driver for the device to correct the capabilities reported. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-14 22:17:56 +08:00
obj-$(CONFIG_HID_ACCUTOUCH) += hid-accutouch.o
HID: add Alps I2C HID Touchpad-Stick support Add support Alps I2C HID Touchpad and Stick device. Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-06-16 17:45:57 +08:00
obj-$(CONFIG_HID_ALPS) += hid-alps.o
HID: ACRUX - activate the device immediately after binding This device does not tolerate delayed opening and goes into a coma if we try to that. Ubuntu even has a crutch for udev that opened the device upon seeing it for the first time, but it did not work if we happened to boot with the device attached, since by the time userspace got around opening the device it was too late. Let's start the device immediately to deal with this issue. Reported-by: Sergei Kolzun <x0r@dv-life.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-11 16:27:34 +08:00
obj-$(CONFIG_HID_ACRUX) += hid-axff.o
HID: move apple quirks Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-19 05:36:49 +08:00
obj-$(CONFIG_HID_APPLE) += hid-apple.o
HID: appleir: add support for Apple ir devices This driver was originally written by James McKenzie, updated by Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend support added. I ported it to the HID subsystem, in order to simplify it a litle and allow lirc to use it through hiddev. More recent versions of the IR receiver are also supported through a patch by Alex Karpenko. The patch also adds support for the 2nd and 5th generation of the controller, and the menu key on newer brushed metal remotes. Tested-by: Fabien André <fabien.andre@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-18 00:15:15 +08:00
obj-$(CONFIG_HID_APPLEIR) += hid-appleir.o
HID: Asus X205TA keyboard driver Asus X205TA built-in keyboard contains wrong logical maximum value in report descriptor. 0x05, 0x01, // Usage Page (Generic Desktop) 0x09, 0x06, // Usage (Keyboard) 0xa1, 0x01, // Collection (Application) 0x85, 0x01, // Report ID (1) 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0xe0, // Usage Minimum (224) 0x29, 0xe7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data,Array,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0x81, 0x03, // Input (Const,Var,Abs) 0x95, 0x05, // Report Count (5) 0x75, 0x01, // Report Size (1) 0x05, 0x08, // Usage (LED) 0x19, 0x01, // Usage Minimum (1) 0x29, 0x05, // Usage Maximum (5) 0x91, 0x02, // Output (Data,Var,Abs) 0x95, 0x01, // Report Count (1) 0x75, 0x03, // Report Size (3) 0x91, 0x03, // Output (Const,Var,Abs) 0x95, 0x06, // Report Count (6) 0x75, 0x08, // Report Size (8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x65, // Logical Maximum (101) * too small * 0x05, 0x07, // Usage Page (Keyboard/Keypad) 0x19, 0x00, // Usage Minimum (0) 0x29, 0xdd, // Usage Maximum (221) 0x81, 0x00, // Input(Data,Array,Abs) In Asus X205TA japanese keyboard model,there are language specific keys over usage id 101. This patch correct wrong logical maximum in report descriptor. Signed-off-by: Yusuke Fujimaki <usk.fujimaki@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-03-21 15:18:42 +08:00
obj-$(CONFIG_HID_ASUS) += hid-asus.o
HID: Makefile: fix alignment of objs-* entries Most of the entries are aligned with TABs, fix those which are not. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-28 19:11:20 +08:00
obj-$(CONFIG_HID_AUREAL) += hid-aureal.o
HID: move belkin quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 05:24:57 +08:00
obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
HID: add BETOP game controller force feedback support Adds force feedback support for BETOP USB game controllers. These devices are mass produced in China. Signed-off-by: Huang Bo <huangbobupt@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-26 18:21:03 +08:00
obj-$(CONFIG_HID_BETOP_FF) += hid-betopff.o
HID: move cherry quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 02:42:25 +08:00
obj-$(CONFIG_HID_CHERRY) += hid-cherry.o
HID: move chicony quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 04:48:52 +08:00
obj-$(CONFIG_HID_CHICONY) += hid-chicony.o
HID: Support for CMedia CM6533 HID audio jack controls The C-Media CM6533 is a USB audio chip featuring it's jack detection capability.The device originates an interrupt transfer via HID interface each time when a jack event occurs. The purpose of this patch is to handle hid raw events to keep the operating system informed of user interactions. Signed-off-by: Ben Chen <ben_chen@bizlinktech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-01-22 11:59:43 +08:00
obj-$(CONFIG_HID_CMEDIA) += hid-cmedia.o
HID: corsair: Add Corsair Vengeance K90 driver This patch implements a HID driver for the Corsair Vengeance K90 keyboard. It fixes the behaviour of the keys using incorrect HID usage codes and exposes the macro playback mode and current profile to the user space through sysfs attributes. It also adds two LED class devices controlling the "record" LED and the backlight. Signed-off-by: Clément Vuchener <clement.vuchener@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-09-30 21:14:20 +08:00
obj-$(CONFIG_HID_CORSAIR) += hid-corsair.o
HID: add hid-cp2112 driver This patch adds support for the Silicon Labs CP2112 "Single-Chip HID USB to SMBus Master Bridge." This is a HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the CP2112. The customizable USB descriptor fields are exposed as sysfs attributes. The SMBus byte-read, byte-data-read/write, and word-data-read transfer modes have been tested by talking to an i2c sensor. The GPIO functions and USB descriptor field programming have also been tested. Signed-off-by: David Barksdale <dbarksdale@uplogix.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-05 02:42:48 +08:00
obj-$(CONFIG_HID_CP2112) += hid-cp2112.o
HID: move cypress quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-24 04:54:08 +08:00
obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
HID: rename hid-drff.c to hid-dr.c Rename drivers/hid/hid-drff.c (a DragonRise Inc. force feedback gamepad driver) to driver/hid/hid-dr.c. This prepares it for addition of support for another gamepad, without force feedback. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-28 19:50:51 +08:00
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
HID: Add Force Feedback support for EMS Trio Linker Plus II The device has connections for GameCube, PlayStation 2 and Dreamcast controllers, however Force Feedback is only supported for PS2 and GC controllers. When using a PS2 controller it may be necessary to press the "Analog" button to enable support for both motors (this behavior is identical to the Windows driver, I have found no way to avoid that). Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-02 03:13:37 +08:00
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
HID: add proper support for Elecom BM084 bluetooth mouse This patch removes the annoying feature of Elecoms BM084 to constantly scroll to the right. The device can be found at: http://www.dealextreme.com/details.dx/sku.15402 Signed-off-by: Richard Nauber <Richard.Nauber@gmail.com> [jkosina@suse.cz: fix build error] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-29 00:54:25 +08:00
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
HID: add driver for ELO 4000/4500 This is a driver for ELO 4000/4500 devices which report themselves as HID devices, but do not really send HID events on touch. So we introduce a new HID 'quirk' driver with a raw_event handler where we take care of those events. What we need additionally is an input_configured hook, because the device does not mention anything about PRESSURE and TOUCH in its report descriptor, but it actually generate those. So we set the bits in the corresponding input_dev in that hook. Thanks to Petr Ostadal who was willing to test the driver. The rest of Cc's listed below had something to do with that driver over the years in our enterprise tree. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Petr Ostadal <postadal@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Egbert Eich <eich@suse.com> Cc: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-07 17:40:58 +08:00
obj-$(CONFIG_HID_ELO) += hid-elo.o
HID: move ezkey quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 03:11:21 +08:00
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
HID: gembird: add new driver to fix Gembird JPD-DualForce 2 This gamepad advertise 5 absolute axis while 4 are actually used. The second Z axis shows some garbage, so it has to be ignored by HID. The first Z axis and the Rz one are actually Rx and Ry. Remap them. We could also just remap and ignore the axis in .input_mapping(). I went ahead with .report_fixup() first, so here it is. Reported-by: Orivej Desh <orivej@gmx.fr> Tested-by: Orivej Desh <orivej@gmx.fr> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-13 23:11:27 +08:00
obj-$(CONFIG_HID_GEMBIRD) += hid-gembird.o
HID: hid-gfrm: Google Fiber TV Box remote controls Add HID driver for Google Fiber TV Box remote controls Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-26 16:15:58 +08:00
obj-$(CONFIG_HID_GFRM) += hid-gfrm.o
HID: add support for MSI GT683R led panels This driver adds support for USB controlled led panels that exists in MSI GT683R laptop Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-06-19 00:05:02 +08:00
obj-$(CONFIG_HID_GT683R) += hid-gt683r.o
HID: move gyration quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-25 05:35:13 +08:00
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
HID: Add driver for Holtek based keyboards with broken HID Corrects two HID descriptor issues, which prevent some Holtek based (USB ID 04d9:a055) keyboards from working. The error when not using the driver is: generic-usb: probe ... failed with error -22 . Signed-off-by: Tom Harwood <tomharwood@fastmail.fm> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-06 23:05:04 +08:00
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
HID: Add driver for Holtek gaming mouse 04d9:a067 This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a too high usage maximum and logical maximum. This driver fixes the report descriptor so those values don't exceed HID_MAX_USAGES. Signed-off-by: Christian Ohm <chr.ohm@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-21 07:31:08 +08:00
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
HID: add FF support for Holtek On Line Grip based gamepads Add force feedback support for Holtek On Line Grip based HID devices. The protocol is more complex than that of most other rumblepads, but the device still needs to be handled as a memoryless one. Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-27 05:07:31 +08:00
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
HID: hyperv: fixup Kconfig / Makefile entries Rename the Kconfig entry for hyperv mouse driver so that it has HID_ prefix as all the other drivers; while at it, place the entry for this driver to properly ordered place in Makefile and Kconfig. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23 05:52:15 +08:00
obj-$(CONFIG_HID_HYPERV_MOUSE) += hid-hyperv.o
HID: Add driver for ION iCade Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a key press and release for each joystick movement or button press or release. For example, moving the stick to the left will generate the "A" key being pressed and then released. A list of all the combinations is available in the iCade developer guide [2]. This driver hides all this and makes the device work as a generic joystick. [1]: http://www.ionaudio.com/products/details/icade [2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdf Signed-off-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 19:10:10 +08:00
obj-$(CONFIG_HID_ICADE) += hid-icade.o
HID: support for Kensington slimblade device 0x47d/0x2041 device sends two extra buttons in 0xff00 usage page and therefore requires special handling. Reported-by: Jason Noble <nobleja@polezero.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-04 23:09:40 +08:00
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
HID: add support for Keytouch IEC 60945 The keyboard has several bugs in its report descriptor, most importantly the Logical Min/Max are completely off. Replace it with simplified descriptor which describes it properly. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-17 22:12:45 +08:00
obj-$(CONFIG_HID_KEYTOUCH) += hid-keytouch.o
HID: add support for Kye/Genius Ergo 525V This device sends several buttons in a separate field, which is wrongly described in the report descriptor. Fix it in the following way: - change led usage page to button - report size 8 count 1 becomes report size 1 count 8 - the button usage range changed to 4-7 (the mouse has three buttons in a different field already). Reported-by: Tomas Hanak <tomas.hanak@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-11 18:43:27 +08:00
obj-$(CONFIG_HID_KYE) += hid-kye.o
HID: Makefile: fix alignment of objs-* entries Most of the entries are aligned with TABs, fix those which are not. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-28 19:11:20 +08:00
obj-$(CONFIG_HID_LCPOWER) += hid-lcpower.o
HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovo Rename module and all functions within so we can add support for other keyboards in the same file. Rename the _tp postfix to _tpkbd, to signify functions relevant to the TP USB keyboard. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-24 06:30:45 +08:00
obj-$(CONFIG_HID_LENOVO) += hid-lenovo.o
HID: move logitech quirks Move them from the core and input code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-05-16 17:49:19 +08:00
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
HID: Add full support for Logitech Unifying receivers With this driver, all the devices paired to a single Unifying receiver are exposed to user processes in separated /input/dev nodes. Keyboards with different layouts can be treated differently, Multiplayer games on single PC (like home theater PC) can differentiate input coming from different kbds paired to the same receiver. Up to now, when Logitech Unifying receivers are connected to a Linux based system, a single keyboard and a single mouse are presented to the HID Layer, even if the Unifying receiver can pair up to six compatible devices. The Unifying receiver by default multiplexes all incoming events (from multiple keyboards/mice) into these two. Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-15 17:34:49 +08:00
obj-$(CONFIG_HID_LOGITECH_DJ) += hid-logitech-dj.o
HID: Introduce hidpp, a module to handle Logitech hid++ devices Logitech devices use a vendor protocol to communicate various information with the device. This protocol is called HID++, and an exerpt can be found here: https://drive.google.com/folderview?id=0BxbRzx7vEV7eWmgwazJ3NUFfQ28&usp=shar The main difficulty which is related to this protocol is that it is a synchronous protocol using the input reports. So when we want to get some information from the device, we need to wait for a matching input report. This driver introduce this capabilities to be able to support the multitouch mode of the Logitech Wireless Touchpad T651 (the bluetooth one). The multitouch data is available directly from the mouse input reports, and we just need to query the device on connect about its caracteristics. HID++ and the touchpad features has a specific reporting mode which uses pure HID++ reports, but Logitech told us not to use it for this specific device. During QA, they detected that some bluetooth input reports where lost, and so the only supported mode is the pointer mode. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Andrew de los Reyes <adlr@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-10-01 01:18:27 +08:00
obj-$(CONFIG_HID_LOGITECH_HIDPP) += hid-logitech-hidpp.o
HID: Makefile: fix alignment of objs-* entries Most of the entries are aligned with TABs, fix those which are not. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-28 19:11:20 +08:00
obj-$(CONFIG_HID_MAGICMOUSE) += hid-magicmouse.o
HID: Add new force feedback driver for Mayflash game controller adapters Add a new module named hid-mf that implements force feedback for game controller adapters manufactured by Mayflash. Currently only the PS3 adapter is supported, other adapters still need to be tested. Signed-off-by: Marcel Hasler <mahasler@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-04 02:47:42 +08:00
obj-$(CONFIG_HID_MAYFLASH) += hid-mf.o
HID: move microsoft quirks Move them from the core code to a separate driver. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-21 03:26:11 +08:00
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
HID: move monterey quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 06:07:50 +08:00
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
HID: hid-multitouch: support for PixCir-based panels Created a driver for PixCir based dual-touch panels, including the one in the Hanvon tablet. This is done in a code structure aimed at unifying support for several existing HID multitouch panels. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Stéphane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-08 06:45:50 +08:00
obj-$(CONFIG_HID_MULTITOUCH) += hid-multitouch.o
HID: Add quirk driver for NTI USB-SUN adapter These adapters allow pre-USB Sun keyboards to be connected to USB-only machines, but include the wrong maximum keycode in their report descriptor, making most of the keys present on Sun keyboards but not 101-key PC keyboards nonfunctional. This patch implements a quirk that overrides the maximum keycode in the report descriptor. Signed-off-by: Jonathan Tomer <jktomer@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-02-02 03:54:57 +08:00
obj-$(CONFIG_HID_NTI) += hid-nti.o
HID: add n-trig digitizer support Added quirks for the N-Trig digitizer. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-19 22:54:46 +08:00
obj-$(CONFIG_HID_NTRIG) += hid-ntrig.o
HID: add support for Ortek WKB-2000 This patch adds a new USB HID driver for the Ortek WKB-2000, working around an incorrect LogicalMaximum value in the USB resource descriptor. Tracked by http://bugzilla.kernel.org/show_bug.cgi?id=14787 Bug originally reported by Ubuntu users: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/405390 Signed-off-by: Johnathon Harris <jmharris@gmail.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-01-21 22:36:52 +08:00
obj-$(CONFIG_HID_ORTEK) += hid-ortek.o
HID: Prodikeys PC-MIDI HID Driver A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard. The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard, multimedia keys and a touch sensitive musical keyboard. The specialised HID driver adds full support for the musical keyboard and extra multimedia keys which are not currently handled by the default HID driver. The specialised HID driver interfaces with ALSA, and presents the midi keyboard as a rawmidi device. Sustain duration, octave shifting and the midi output channel can be read/written form userspace via sysfs. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> ALSA parts: Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-12 21:18:59 +08:00
obj-$(CONFIG_HID_PRODIKEYS) += hid-prodikeys.o
HID: move pantherlord FF processing Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-09-19 01:43:32 +08:00
obj-$(CONFIG_HID_PANTHERLORD) += hid-pl.o
HID: add support for PenMount HID TouchScreen Driver This patch adds a seperate hid-penmount driver to work around an issue with the HID report descriptor. The descriptor does not contain the ContactID usage and as result the touchscreen is represented as normal mouse to the system. This driver maps the button 0 emitted by the touchscreen to BTN_TOUCH. This makes it possible to use touch events in userspace. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-03 16:33:53 +08:00
obj-$(CONFIG_HID_PENMOUNT) += hid-penmount.o
HID: move petalynx quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-25 05:46:21 +08:00
obj-$(CONFIG_HID_PETALYNX) += hid-petalynx.o
HID: new driver for PicoLCD device Add basic driver for PicoLCD graphics device. Initially support keypad with input device and provide support for debugging communication via events file from debugfs. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-31 04:33:50 +08:00
obj-$(CONFIG_HID_PICOLCD) += hid-picolcd.o
HID: picoLCD: split driver code In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-31 03:38:28 +08:00
hid-picolcd-y += hid-picolcd_core.o
HID: Use Kbuild idiom in Makefiles Use <driver>-$(CONFIG_FOO) syntax to build multipart objects with optional parts, since all the config options are bool. Also, delete the obvious comments in the usbhid Makefile. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-01-21 21:07:10 +08:00
hid-picolcd-$(CONFIG_HID_PICOLCD_FB) += hid-picolcd_fb.o
hid-picolcd-$(CONFIG_HID_PICOLCD_BACKLIGHT) += hid-picolcd_backlight.o
hid-picolcd-$(CONFIG_HID_PICOLCD_LCD) += hid-picolcd_lcd.o
hid-picolcd-$(CONFIG_HID_PICOLCD_LEDS) += hid-picolcd_leds.o
hid-picolcd-$(CONFIG_HID_PICOLCD_CIR) += hid-picolcd_cir.o
hid-picolcd-$(CONFIG_DEBUG_FS) += hid-picolcd_debugfs.o
HID: picoLCD: split driver code In order to make code maintenance easier, split the vairous functions into individial files (this removes a bunch of #ifdefs). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-31 03:38:28 +08:00
HID: plantronics: fix errant mouse events This version of the driver prevents Telephony pages which are not mapped as Consumer Control applications AND are not on the Consumer Page from being registered by the hid-input driver. Signed-off-by: JD Cole <jd.cole@plantronics.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-01 08:34:42 +08:00
obj-$(CONFIG_HID_PLANTRONICS) += hid-plantronics.o
HID: support primax keyboards violating USB HID spec Primax keyboards with the issue this driver addresses report modifier keys as in band key events instead of as out of band modifier bits, resulting in the modifier keys generating key up events immediately before the keys they are intended to modify. This driver rewrites the raw report data from such keyboards into USB HID 1.11 compliant report data. It only matches the USB vendor and product IDs for the keyboard it has been tested on. Since there are several keyboards, notably a number of laptops and folding USB keyboards known to have similar unresolved problem reports, the list is expected to grow. Signed-off-by: Terry Lambert <tlambert@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-15 08:18:54 +08:00
obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
HID: roccat: Only one Kconfig entry for all roccat drivers To cleanup Kconfig space and ease selection for users there is now a single entry that selects all roccat related drivers at once. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-30 00:20:14 +08:00
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \
hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
HID: roccat: add support for Roccat Kone Pure gaming mouse Userland-tools can already be found at http://sourceforge.net/projects/roccat Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-10 19:32:44 +08:00
hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \
HID: roccat: add support for Ryos MK keyboards Added support for 3 keyboards with increasing illumination capabilities Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-29 01:52:07 +08:00
hid-roccat-lua.o hid-roccat-pyra.o hid-roccat-ryos.o hid-roccat-savu.o
HID: rmi: introduce RMI driver for Synaptics touchpads This driver add support for RMI4 over USB or I2C. The current state is that it uses its own RMI4 implementation, but once RMI4 is merged upstream, the driver will be a transport driver for the RMI4 library. Part of this driver should be considered as temporary. Most of the RMI4 processing and input handling will be deleted at some point. I based my work on Andrew's regarding its port of RMI4 over HID (see https://github.com/mightybigcar/synaptics-rmi4/tree/rmihid ) This repo presents how the driver may looks like at the end: https://github.com/mightybigcar/synaptics-rmi4/blob/rmihid/drivers/input/rmi4/rmi_hid.c Without this temporary solution, the workaround we gave to users is to disable i2c-hid, which leads to disabling the touchscreen on the XPS 11 and 12 (Haswell generation). Related bugs: https://bugzilla.redhat.com/show_bug.cgi?id=1048314 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218973 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-08 01:39:33 +08:00
obj-$(CONFIG_HID_RMI) += hid-rmi.o
HID: add new driver for non-compliant Saitek devices The driver currently only supports the PS1000 controller. It fixes the report descriptor by removing a non-existing axis and clearing the constant bit on the d-pad and button input reports. Signed-off-by: Andreas Hübner <andreas@k4n.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 09:10:06 +08:00
obj-$(CONFIG_HID_SAITEK) += hid-saitek.o
HID: move samsung quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-26 04:31:48 +08:00
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
HID: force feedback support for SmartJoy PLUS PS2/USB adapter This driver adds force feedback support for SmartJoy PLUS PS2/USB adapter. I made this driver one device spesific instead of making generic 'wisegroup-ff' because I have another Wisegroup PS2/USB adapter that doesn't work same way as SmartJoy PLUS. If another device that is compatible pops up, this driver could be then renamed to something more generic. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-13 16:54:38 +08:00
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
HID: move sony quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-26 05:47:04 +08:00
obj-$(CONFIG_HID_SONY) += hid-sony.o
HID: Add driver to fix Speedlink VAD Cezanne support Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one place to another every now and then. The issue are relative motion events erroneously reported by the device, each having a distance value of +256. This 256 can in fact never occur due to real motion, therefore those events can safely be ignored. The driver also drops useless EV_REL events with a value of 0, that the device sends every time it sends an "real" EV_REL or EV_KEY event. Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-28 00:40:29 +08:00
obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o
HID: steelseries: rename driver to be compliant with other drivers We usually group drivers on a per-vendor basis, implementing device-specific deviations from the standard in vendor-specific driver. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-31 23:50:24 +08:00
obj-$(CONFIG_HID_STEELSERIES) += hid-steelseries.o
HID: move sunplus quirks Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-06-24 03:56:07 +08:00
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
HID: fix hid-ff drivers so that devices work even without ff support Currently, the hid-*ff force feedback drivers, which claim the blacklisted device on a HID bus, are only compiled in if the user selects force feedback support. However we want the device to be supported even when the kernel is configured without force feedback. This patch fixes the drivers in a way that they get compiled even if force feedback is turned off; all the force feedback support code is compiled out in such case, and the driver works as a usual driver on HID bus, claiming and initializing the device, making it operational without FF effects. Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-15 21:46:44 +08:00
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
HID: add support for tivo slide remote This patch finishes off adding full support for the TiVo Slide remote, which is a mostly pure HID device from the perspective of the kernel. There are a few mappings that use a vendor-specific usage page, and a few keys in the consumer usage page that I think make sense to remap slightly, to better fit their key labels' intended use. Doing this in a stand-alone hid-tivo.c makes the modifications only matter for this specific device. What's actually connected to the computer is a Broadcom-made usb dongle, which has an embedded hub, bluetooth adapter, mouse and keyboard devices. You pair with the dongle, then the remote sends data that its converted into HID on the keyboard interface (the mouse interface doesn't do anything interesting, so far as I can tell). lsusb for this device: Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp. Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp. Bus 004 Device 003: ID 150a:1201 Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Speaking of the keyboard interface, the remote actually does contain a keyboard as well. The top slides away, revealing a reasonably functional qwerty keyboard (not unlike many slide cell phones), thus the product name. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-15 04:57:42 +08:00
obj-$(CONFIG_HID_TIVO) += hid-tivo.o
HID: driver for TopSeed Cyberlink quirky remote I recently picked up a Cyberlink branded remote control produced by TopSeed Tech Corp. Alas, it appears that this device is using non-standard mappings for some of it's keys (Usage page 0xffbc). Signed-off-by: Lev Babiev <harley@hosers.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04 07:36:56 +08:00
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
HID: driver for Twinhan USB 6253:0100 remote control Add explicit key mappings for TwinHan USB HID remote control. All dummy Ctrl, Alt, Meta, ... key press/release events generated by the remote are silenced by "unmapping" them. This makes Power and Volume keys single-key and strips the regular (even while idle) key release events for Ctrl, Alt, Meta, ... Signed-off-by: Bruno Premont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-13 20:19:58 +08:00
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
HID: Add support for UC-Logic WP????U tablets Add support for UC-Logic WP4030U, WP5540U and WP8060U tablets. These tablets are usually sold by Genius, Trust and possibly others under different names and in different cases, but with the original USB vendor/product IDs. Currently, these tablets are supported by standalone X.org driver WizardPen. This patch aims to fix them in the kernel and make them supported by the generic evdev X.org driver. Still, some minor fixes in the X.org driver are to be made for the full stack support. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-10 00:44:17 +08:00
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
HID: udraw-ps3: Add support for the uDraw tablet for PS3 This adds support for the THQ uDraw tablet for the PS3, as 4 separate device nodes, so that user-space can easily consume events coming from the hardware. Note that the touchpad two-finger support is fairly unreliable, and a right-click can only be achieved with a two-finger tap with the two fingers slightly apart (about 1cm should be enough). Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-11-15 20:02:05 +08:00
obj-$(CONFIG_HID_UDRAW_PS3) += hid-udraw-ps3.o
HID: migrate USB LED driver from usb misc to hid This patch migrates the USB LED driver to the HID subsystem. Supported are Dream Cheeky Webmail Notifier / Friends Alert and Riso Kagaku Webmail Notifier. Benefits: - Avoid using USB low-level calls and use the HID subsystem instead (as this device provides a USB HID interface) - Use standard LED subsystem instead of proprietary sysfs entries, this allows e.g. to use the device with features like triggers Successfully tested with a Dream Cheeky Webmail Notifier and a Riso Kagaku Webmail Notifier compatible device. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-06-18 03:20:46 +08:00
obj-$(CONFIG_HID_LED) += hid-led.o
HID: Add new driver for non-compliant Xin-Mo devices. The driver currently only supports the Dual Arcade controller. It fixes the negative axis event values (the devices sends -2) to match the logical axis minimum of the HID report descriptor (the report announces -1). It is needed because hid-input discards out of bounds values. Signed-off-by: Olivier Scherler <oscherler@ithink.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-28 01:20:02 +08:00
obj-$(CONFIG_HID_XINMO) += hid-xinmo.o
HID: fix hid-ff drivers so that devices work even without ff support Currently, the hid-*ff force feedback drivers, which claim the blacklisted device on a HID bus, are only compiled in if the user selects force feedback support. However we want the device to be supported even when the kernel is configured without force feedback. This patch fixes the drivers in a way that they get compiled even if force feedback is turned off; all the force feedback support code is compiled out in such case, and the driver works as a usual driver on HID bus, claiming and initializing the device, making it operational without FF effects. Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-15 21:46:44 +08:00
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
HID: Zydacron Remote Control driver A specialised HID driver for the Zydacron Remote Control (usb id: 13ec:0006). The specialised HID driver adds support for the buttons which are not currently handled by the default HID driver. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-15 00:30:59 +08:00
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
Input: wacom - move the USB (now hid) Wacom driver in drivers/hid wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-25 04:10:09 +08:00
wacom-objs := wacom_wac.o wacom_sys.o
Input: HID - remove hid-wacom Bluetooth driver Bluetooth Wacom tablets are now handled by the regular wacom.ko driver. Remove the now useless hid-wacom driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-07 05:06:26 +08:00
obj-$(CONFIG_HID_WACOM) += wacom.o
HID: add support for two Waltop tablets Add support for Waltop Slim Tablet 5.8 inch and Media Tablet 10.6 inch. These (and other Waltop) tablets are usually sold by different companies (such as Genius and Trust) and with different names, but with the same USB vendor/product IDs. Slim Tablet 5.8 inch is known to also be sold as Genius G-Pen F350 and Trust Widescreen Mini Tablet (item no 16485). Media Tablet 10.6 inch is known to also be sold as Genius G-Pen M609 and M609X. Of these only the latter is known to be supported. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-20 23:21:11 +08:00
obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
HID: wiimote: Add Nintendo Wii Remote driver stub Add stub driver for the Nintendo Wii Remote. The wii remote uses the HID protocol to communicate with the host over bluetooth. Hence, add dependency for HIDP and place driver in hid subsystem. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-05 19:45:08 +08:00
obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
obj-$(CONFIG_HID_SENSOR_HUB) += hid-sensor-hub.o
HID: sensor: Custom and Generic sensor support HID Sensor Spec defines two usage ids for custom sensors HID_USAGE_SENSOR_TYPE_OTHER_CUSTOM (0x09, 0xE1) HID_USAGE_SENSOR_TYPE_OTHER_GENERIC(0x09, 0xE2) In addition the standard also defines usage ids for custom fields. The purpose of these sensors is to extend the functionality or provide a way to obfuscate the data being communicated by a sensor. Without knowing the mapping between the data and its encapsulated form, it is difficult for an driver to determine what data is being communicated by the sensor. This allows some differentiating use cases, where vendor can provide applications. Since these can't be represented by standard sensor interfaces like IIO, we present these as fields with - type (input/output) - units - min/max - get/set value In addition an dev interface to transfer report events. Details about this interface is described in /Documentation/hid/hid-sensor.txt. Manufacturers should not use these ids for any standard sensors, otherwise the the product/vendor id can be added to black list. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-04-11 02:22:22 +08:00
obj-$(CONFIG_HID_SENSOR_CUSTOM_SENSOR) += hid-sensor-custom.o
HID: move logitech quirks Move them from the core and input code to a separate driver. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-05-16 17:49:19 +08:00
USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhid Separate usbhid code into dedicated drivers/hid/usbhid directory as discussed previously with Greg, so that it eases maintaineance process. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-08 23:47:49 +08:00
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
obj-$(CONFIG_USB_KBD) += usbhid/
HID: i2c-hid: introduce HID over i2c specification implementation Microsoft published the protocol specification of HID over i2c: http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx This patch introduces an implementation of this protocol. This implementation does not includes the ACPI part of the specification. This will come when ACPI 5.0 devices enumeration will be available. Once the ACPI part is done, OEM will not have to declare HID over I2C devices in their platform specific driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-12 22:42:59 +08:00
obj-$(CONFIG_I2C_HID) += i2c-hid/
HID: intel_ish-hid: ISH Transport layer The ISH transport layer (ishtp) is a bi-directional protocol implemented on the top of PCI based inter processor communication layer. This layer offers: - Connection management - Flow control with the firmware - Multiple client sessions - Client message transfer - Client message reception - DMA for RX and TX for fast data transfer Refer to Documentation/hid/intel-ish-hid.txt for overview of the functionality implemented in this layer. Original-author: Daniel Drubin <daniel.drubin@intel.com> Reviewed-and-tested-by: Ooi, Joyce <joyce.ooi@intel.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Rann Bar-On <rb6@duke.edu> Tested-by: Atri Bhattacharya <badshah400@aim.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-08-07 17:25:34 +08:00
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/