2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* INET An implementation of the TCP/IP protocol suite for the LINUX
|
|
|
|
* operating system. INET is implemented using the BSD Socket
|
|
|
|
* interface as the means of communication with the user level.
|
|
|
|
*
|
|
|
|
* Global definitions for the Ethernet IEEE 802.3 interface.
|
|
|
|
*
|
|
|
|
* Version: @(#)if_ether.h 1.0.1a 02/08/94
|
|
|
|
*
|
|
|
|
* Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
|
|
|
|
* Donald Becker, <becker@super.org>
|
2008-10-14 10:01:08 +08:00
|
|
|
* Alan Cox, <alan@lxorguk.ukuu.org.uk>
|
2005-04-17 06:20:36 +08:00
|
|
|
* Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _LINUX_IF_ETHER_H
|
|
|
|
#define _LINUX_IF_ETHER_H
|
|
|
|
|
2005-11-11 05:03:08 +08:00
|
|
|
#include <linux/types.h>
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
|
|
|
|
* and FCS/CRC (frame check sequence).
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define ETH_ALEN 6 /* Octets in one ethernet addr */
|
|
|
|
#define ETH_HLEN 14 /* Total octets in header. */
|
|
|
|
#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
|
|
|
|
#define ETH_DATA_LEN 1500 /* Max. octets in payload */
|
|
|
|
#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
|
2007-05-16 06:29:16 +08:00
|
|
|
#define ETH_FCS_LEN 4 /* Octets in the FCS */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* These are the defined Ethernet Protocol ID's.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
|
|
|
|
#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
|
|
|
|
#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
|
|
|
|
#define ETH_P_IP 0x0800 /* Internet Protocol packet */
|
|
|
|
#define ETH_P_X25 0x0805 /* CCITT X.25 */
|
|
|
|
#define ETH_P_ARP 0x0806 /* Address Resolution packet */
|
|
|
|
#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
|
|
|
|
#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
|
|
|
|
#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
|
|
|
|
#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
|
|
|
|
#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
|
|
|
|
#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
|
|
|
|
#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
|
|
|
|
#define ETH_P_LAT 0x6004 /* DEC LAT */
|
|
|
|
#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
|
|
|
|
#define ETH_P_CUST 0x6006 /* DEC Customer use */
|
|
|
|
#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
|
2008-10-10 03:00:17 +08:00
|
|
|
#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
|
2005-04-17 06:20:36 +08:00
|
|
|
#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
|
|
|
|
#define ETH_P_ATALK 0x809B /* Appletalk DDP */
|
|
|
|
#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
|
|
|
|
#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
|
|
|
|
#define ETH_P_IPX 0x8137 /* IPX over DIX */
|
|
|
|
#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
|
2007-04-26 13:05:55 +08:00
|
|
|
#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
|
2006-02-22 08:36:44 +08:00
|
|
|
#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
|
2005-04-17 06:20:36 +08:00
|
|
|
#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
|
|
|
|
* defined in draft-wilson-wrec-wccp-v2-00.txt */
|
|
|
|
#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
|
|
|
|
#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
|
|
|
|
#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
|
|
|
|
#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
|
|
|
|
#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
|
|
|
|
#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
|
|
|
|
* over Ethernet
|
|
|
|
*/
|
2008-08-03 07:30:55 +08:00
|
|
|
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
|
2005-04-17 06:20:36 +08:00
|
|
|
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
|
2006-01-16 18:42:12 +08:00
|
|
|
#define ETH_P_TIPC 0x88CA /* TIPC */
|
net: Distributed Switch Architecture protocol support
Distributed Switch Architecture is a protocol for managing hardware
switch chips. It consists of a set of MII management registers and
commands to configure the switch, and an ethernet header format to
signal which of the ports of the switch a packet was received from
or is intended to be sent to.
The switches that this driver supports are typically embedded in
access points and routers, and a typical setup with a DSA switch
looks something like this:
+-----------+ +-----------+
| | RGMII | |
| +-------+ +------ 1000baseT MDI ("WAN")
| | | 6-port +------ 1000baseT MDI ("LAN1")
| CPU | | ethernet +------ 1000baseT MDI ("LAN2")
| |MIImgmt| switch +------ 1000baseT MDI ("LAN3")
| +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4")
| | | |
+-----------+ +-----------+
The switch driver presents each port on the switch as a separate
network interface to Linux, polls the switch to maintain software
link state of those ports, forwards MII management interface
accesses to those network interfaces (e.g. as done by ethtool) to
the switch, and exposes the switch's hardware statistics counters
via the appropriate Linux kernel interfaces.
This initial patch supports the MII management interface register
layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and
supports the "Ethertype DSA" packet tagging format.
(There is no officially registered ethertype for the Ethertype DSA
packet format, so we just grab a random one. The ethertype to use
is programmed into the switch, and the switch driver uses the value
of ETH_P_EDSA for this, so this define can be changed at any time in
the future if the one we chose is allocated to another protocol or
if Ethertype DSA gets its own officially registered ethertype, and
everything will continue to work.)
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Nicolas Pitre <nico@marvell.com>
Tested-by: Byron Bradley <byron.bbradley@gmail.com>
Tested-by: Tim Ellis <tim.ellis@mac.com>
Tested-by: Peter van Valderen <linux@ddcrew.com>
Tested-by: Dirk Teurlings <dirk@upexia.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 21:44:02 +08:00
|
|
|
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Non DIX types. Won't clash for 1500 types.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
|
|
|
|
#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
|
|
|
|
#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
|
|
|
|
#define ETH_P_802_2 0x0004 /* 802.2 frames */
|
|
|
|
#define ETH_P_SNAP 0x0005 /* Internal only */
|
|
|
|
#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
|
|
|
|
#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
|
|
|
|
#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
|
|
|
|
#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
|
2007-12-17 07:59:24 +08:00
|
|
|
#define ETH_P_CAN 0x000C /* Controller Area Network */
|
2005-04-17 06:20:36 +08:00
|
|
|
#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
|
|
|
|
#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
|
|
|
|
#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
|
|
|
|
#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
|
|
|
|
#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
|
|
|
|
#define ETH_P_ECONET 0x0018 /* Acorn Econet */
|
|
|
|
#define ETH_P_HDLC 0x0019 /* HDLC frames */
|
|
|
|
#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
|
2008-10-07 21:45:02 +08:00
|
|
|
#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
|
2008-10-07 21:46:07 +08:00
|
|
|
#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
|
2008-09-23 10:51:15 +08:00
|
|
|
#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* This is an Ethernet frame header.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct ethhdr {
|
|
|
|
unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
|
|
|
|
unsigned char h_source[ETH_ALEN]; /* source ether addr */
|
2005-11-11 05:03:08 +08:00
|
|
|
__be16 h_proto; /* packet type ID field */
|
2005-04-17 06:20:36 +08:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
|
|
|
|
static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
|
|
|
|
{
|
2007-03-20 06:33:04 +08:00
|
|
|
return (struct ethhdr *)skb_mac_header(skb);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
2005-08-16 13:18:02 +08:00
|
|
|
|
2007-10-09 16:40:57 +08:00
|
|
|
int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
|
|
|
|
|
2005-09-28 06:59:43 +08:00
|
|
|
#ifdef CONFIG_SYSCTL
|
2005-08-16 13:18:02 +08:00
|
|
|
extern struct ctl_table ether_table[];
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif
|
2007-10-04 08:59:30 +08:00
|
|
|
|
2007-12-25 13:28:09 +08:00
|
|
|
extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
|
|
|
|
|
2007-10-04 08:59:30 +08:00
|
|
|
/*
|
|
|
|
* Display a 6 byte device address (MAC) in a readable format.
|
|
|
|
*/
|
2008-02-24 12:09:11 +08:00
|
|
|
extern char *print_mac(char *buf, const unsigned char *addr);
|
|
|
|
#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
|
2007-12-25 13:28:09 +08:00
|
|
|
#define MAC_BUF_SIZE 18
|
|
|
|
#define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE] __maybe_unused
|
2007-10-04 08:59:30 +08:00
|
|
|
|
2005-09-28 06:59:43 +08:00
|
|
|
#endif
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#endif /* _LINUX_IF_ETHER_H */
|