hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/include/linux/irqdomain.h

226 lines
8.7 KiB
C
Raw Normal View History

irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
/*
* irq_domain - IRQ translation domains
*
* Translation infrastructure between hw and linux irq numbers. This is
* helpful for interrupt controllers to implement mapping between hardware
* irq numbers and the Linux irq number space.
*
* irq_domains also have a hook for translating device tree interrupt
* representation into a hardware irq number that can be mapped back to a
* Linux irq number without any extra platform support code.
*
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
* Interrupt controller "domain" data structure. This could be defined as a
* irq domain controller. That is, it handles the mapping between hardware
* and virtual interrupt numbers for a given interrupt domain. The domain
* structure is generally created by the PIC code for a given PIC instance
* (though a domain can cover more than one PIC if they have a flat number
* model). It's the domain callbacks that are responsible for setting the
* irq_chip on a given irq_desc after it's been mapped.
irq_domain: Move irq_domain code from powerpc to kernel/irq This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-16 16:37:49 +08:00
*
* The host code and data structures are agnostic to whether or not
* we use an open firmware device-tree. We do have references to struct
* device_node in two places: in irq_find_host() to find the host matching
* a given interrupt controller node, and of course as an argument to its
* counterpart domain->ops->match() callback. However, those are treated as
* generic pointers by the core and the fact that it's actually a device-node
* pointer is purely a convention between callers and implementation. This
* code could thus be used on other architectures by replacing those two
* by some sort of arch-specific void * "token" used to identify interrupt
* controllers.
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
*/
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
#ifndef _LINUX_IRQDOMAIN_H
#define _LINUX_IRQDOMAIN_H
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
#include <linux/types.h>
#include <linux/radix-tree.h>
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
struct device_node;
struct irq_domain;
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
struct of_device_id;
irq_domain: Add support for base irq and hwirq in legacy mappings Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:55 +08:00
/* Number of irqs reserved for a legacy isa controller */
#define NUM_ISA_INTERRUPTS 16
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
/**
* struct irq_domain_ops - Methods for irq_domain objects
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
* @match: Match an interrupt controller device node to a host, returns
* 1 on a match
* @map: Create or update a mapping between a virtual irq number and a hw
* irq number. This is called only once for a given mapping.
* @unmap: Dispose of such a mapping
* @xlate: Given a device tree node and interrupt specifier, decode
* the hardware irq number and linux irq type value.
*
* Functions below are provided by the driver and called whenever a new mapping
* is created or an old mapping is disposed. The driver can then proceed to
* whatever internal data structures management is required. It also needs
* to setup the irq_desc when returning from map().
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
*/
struct irq_domain_ops {
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
int (*match)(struct irq_domain *d, struct device_node *node);
int (*map)(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw);
void (*unmap)(struct irq_domain *d, unsigned int virq);
int (*xlate)(struct irq_domain *d, struct device_node *node,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type);
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
};
genirq: Generic chip: Add linear irq domain support Provide infrastructure for irq chip implementations which work on linear irq domains. - Interface to allocate multiple generic chips which are associated to the irq domain. - Interface to get the generic chip pointer for a particular hardware interrupt in the domain. - irq domain mapping function to install the chip for a particular interrupt. Note: This lacks a removal function for now. [ Sebastian Hesselbarth: Mask cache and pointer math fixups ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Rob Landley <rob@landley.net> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20130506142539.450634298@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 22:30:27 +08:00
extern struct irq_domain_ops irq_generic_chip_ops;
struct irq_domain_chip_generic;
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
/**
* struct irq_domain - Hardware interrupt number translation object
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
* @link: Element in global irq_domain list.
irqdomain: Eliminate revmap type The NOMAP irq_domain type is only used by a handful of interrupt controllers and it unnecessarily complicates the code by adding special cases on how to look up mappings and different revmap functions are used for each type which need to validate the correct type is passed to it before performing the reverse map. Eliminating the revmap_type and making a single reverse mapping function simplifies the code. It also shouldn't be any slower than having separate revmap functions because the type of the revmap needed to be checked anyway. The linear and tree revmap types were already merged in a previous patch. This patch rolls the NOMAP or direct mapping behaviour into the same domain code making is possible for an irq domain to do any mapping type; linear, tree or direct; and that the mapping will be transparent to the interrupt controller driver. With this change, direct mappings will get stored in the linear or tree mapping for consistency. Reverse mapping from the hwirq to virq will go through the normal lookup process. However, any controller using a direct mapping can take advantage of knowing that hwirq==virq for any mapped interrupts skip doing a revmap lookup when handling IRQs. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:03:59 +08:00
* @name: Name of interrupt domain
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
* @ops: pointer to irq_domain methods
* @host_data: private data pointer for use by owner. Not touched by irq_domain
* core code.
irqdomain: Eliminate revmap type The NOMAP irq_domain type is only used by a handful of interrupt controllers and it unnecessarily complicates the code by adding special cases on how to look up mappings and different revmap functions are used for each type which need to validate the correct type is passed to it before performing the reverse map. Eliminating the revmap_type and making a single reverse mapping function simplifies the code. It also shouldn't be any slower than having separate revmap functions because the type of the revmap needed to be checked anyway. The linear and tree revmap types were already merged in a previous patch. This patch rolls the NOMAP or direct mapping behaviour into the same domain code making is possible for an irq domain to do any mapping type; linear, tree or direct; and that the mapping will be transparent to the interrupt controller driver. With this change, direct mappings will get stored in the linear or tree mapping for consistency. Reverse mapping from the hwirq to virq will go through the normal lookup process. However, any controller using a direct mapping can take advantage of knowing that hwirq==virq for any mapped interrupts skip doing a revmap lookup when handling IRQs. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:03:59 +08:00
*
* Optional elements
* @of_node: Pointer to device tree nodes associated with the irq_domain. Used
* when decoding device tree interrupt specifiers.
* @gc: Pointer to a list of generic chips. There is a helper function for
* setting up one or more generic chips for interrupt controllers
* drivers using the generic chip library which uses this pointer.
*
* Revmap data, used internally by irq_domain
* @revmap_direct_max_irq: The largest hwirq that can be set for controllers that
* support direct mapping
* @revmap_size: Size of the linear map table @linear_revmap[]
* @revmap_tree: Radix map tree for hwirqs that don't fit in the linear map
* @linear_revmap: Linear table of hwirq->virq reverse mappings
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
*/
struct irq_domain {
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
struct list_head link;
irqdomain: Add a name field This patch adds a name field to the irq_domain structure to help mere mortals understand the mappings between irq domains and virqs. It also converts a number of places that have open-coded some kind of fudging an irqdomain name to use the new field. This means a more consistent display of names in irq domain log messages and debugfs output. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-06 21:23:30 +08:00
const char *name;
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
const struct irq_domain_ops *ops;
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
void *host_data;
irqdomain: Eliminate revmap type The NOMAP irq_domain type is only used by a handful of interrupt controllers and it unnecessarily complicates the code by adding special cases on how to look up mappings and different revmap functions are used for each type which need to validate the correct type is passed to it before performing the reverse map. Eliminating the revmap_type and making a single reverse mapping function simplifies the code. It also shouldn't be any slower than having separate revmap functions because the type of the revmap needed to be checked anyway. The linear and tree revmap types were already merged in a previous patch. This patch rolls the NOMAP or direct mapping behaviour into the same domain code making is possible for an irq domain to do any mapping type; linear, tree or direct; and that the mapping will be transparent to the interrupt controller driver. With this change, direct mappings will get stored in the linear or tree mapping for consistency. Reverse mapping from the hwirq to virq will go through the normal lookup process. However, any controller using a direct mapping can take advantage of knowing that hwirq==virq for any mapped interrupts skip doing a revmap lookup when handling IRQs. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:03:59 +08:00
/* Optional data */
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
struct device_node *of_node;
genirq: Generic chip: Add linear irq domain support Provide infrastructure for irq chip implementations which work on linear irq domains. - Interface to allocate multiple generic chips which are associated to the irq domain. - Interface to get the generic chip pointer for a particular hardware interrupt in the domain. - irq domain mapping function to install the chip for a particular interrupt. Note: This lacks a removal function for now. [ Sebastian Hesselbarth: Mask cache and pointer math fixups ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Gerlando Falauto <gerlando.falauto@keymile.com> Cc: Rob Landley <rob@landley.net> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: http://lkml.kernel.org/r/20130506142539.450634298@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-06 22:30:27 +08:00
struct irq_domain_chip_generic *gc;
irqdomain: merge linear and tree reverse mappings. Keeping them separate makes irq_domain more complex and adds a lot of code (as proven by the diffstat). Merging them simplifies the whole scheme. This change makes it so both the tree and linear methods can be used by the same irq_domain instance. If the hwirq is less than the ->linear_size, then the linear map is used to reverse map the hwirq. Otherwise the radix tree is used. The test for which map to use is no more expensive that the existing code, so the performance of fast path is preserved. It also means that complex interrupt controllers can use both the linear map and a tree in the same domain. This may be useful for an interrupt controller with a base set of core irqs and a large number of GPIOs which might be used as irqs. The linear map could cover the core irqs, and the tree used for thas irqs. The linear map could cover the core irqs, and the tree used for the gpios. v2: Drop reorganization of revmap data Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-12 00:24:31 +08:00
irqdomain: Eliminate revmap type The NOMAP irq_domain type is only used by a handful of interrupt controllers and it unnecessarily complicates the code by adding special cases on how to look up mappings and different revmap functions are used for each type which need to validate the correct type is passed to it before performing the reverse map. Eliminating the revmap_type and making a single reverse mapping function simplifies the code. It also shouldn't be any slower than having separate revmap functions because the type of the revmap needed to be checked anyway. The linear and tree revmap types were already merged in a previous patch. This patch rolls the NOMAP or direct mapping behaviour into the same domain code making is possible for an irq domain to do any mapping type; linear, tree or direct; and that the mapping will be transparent to the interrupt controller driver. With this change, direct mappings will get stored in the linear or tree mapping for consistency. Reverse mapping from the hwirq to virq will go through the normal lookup process. However, any controller using a direct mapping can take advantage of knowing that hwirq==virq for any mapped interrupts skip doing a revmap lookup when handling IRQs. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:03:59 +08:00
/* reverse map data. The linear map gets appended to the irq_domain */
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
irq_hw_number_t hwirq_max;
irqdomain: Eliminate revmap type The NOMAP irq_domain type is only used by a handful of interrupt controllers and it unnecessarily complicates the code by adding special cases on how to look up mappings and different revmap functions are used for each type which need to validate the correct type is passed to it before performing the reverse map. Eliminating the revmap_type and making a single reverse mapping function simplifies the code. It also shouldn't be any slower than having separate revmap functions because the type of the revmap needed to be checked anyway. The linear and tree revmap types were already merged in a previous patch. This patch rolls the NOMAP or direct mapping behaviour into the same domain code making is possible for an irq domain to do any mapping type; linear, tree or direct; and that the mapping will be transparent to the interrupt controller driver. With this change, direct mappings will get stored in the linear or tree mapping for consistency. Reverse mapping from the hwirq to virq will go through the normal lookup process. However, any controller using a direct mapping can take advantage of knowing that hwirq==virq for any mapped interrupts skip doing a revmap lookup when handling IRQs. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:03:59 +08:00
unsigned int revmap_direct_max_irq;
unsigned int revmap_size;
struct radix_tree_root revmap_tree;
irqdomain: merge linear and tree reverse mappings. Keeping them separate makes irq_domain more complex and adds a lot of code (as proven by the diffstat). Merging them simplifies the whole scheme. This change makes it so both the tree and linear methods can be used by the same irq_domain instance. If the hwirq is less than the ->linear_size, then the linear map is used to reverse map the hwirq. Otherwise the radix tree is used. The test for which map to use is no more expensive that the existing code, so the performance of fast path is preserved. It also means that complex interrupt controllers can use both the linear map and a tree in the same domain. This may be useful for an interrupt controller with a base set of core irqs and a large number of GPIOs which might be used as irqs. The linear map could cover the core irqs, and the tree used for thas irqs. The linear map could cover the core irqs, and the tree used for the gpios. v2: Drop reorganization of revmap data Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-12 00:24:31 +08:00
unsigned int linear_revmap[];
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
};
irq_domain: Make irq_domain structure match powerpc's irq_host Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:48 +08:00
#ifdef CONFIG_IRQ_DOMAIN
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
struct irq_domain *__irq_domain_add(struct device_node *of_node, int size,
irq_hw_number_t hwirq_max, int direct_max,
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
const struct irq_domain_ops *ops,
void *host_data);
irq_domain: Standardise legacy/linear domain selection A large proportion of interrupt controllers that support legacy mappings do so because non-DT systems need to use fixed IRQ numbers when registering devices via buses but can otherwise use a linear mapping. The interrupt controller itself typically is not affected by the mapping used and best practice is to use a linear mapping where possible so drivers frequently select at runtime depending on if a legacy range has been allocated to them. Standardise this behaviour by providing irq_domain_register_simple() which will allocate a linear mapping unless a positive first_irq is provided in which case it will fall back to a legacy mapping. This helps make best practice for irq_domain adoption clearer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-07-05 19:19:19 +08:00
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
const struct irq_domain_ops *ops,
void *host_data);
irq_domain: Replace irq_alloc_host() with revmap-specific initializers Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:54 +08:00
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
irq_domain: Add support for base irq and hwirq in legacy mappings Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:55 +08:00
unsigned int size,
unsigned int first_irq,
irq_hw_number_t first_hwirq,
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
const struct irq_domain_ops *ops,
irq_domain: Replace irq_alloc_host() with revmap-specific initializers Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:54 +08:00
void *host_data);
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
extern struct irq_domain *irq_find_host(struct device_node *node);
extern void irq_set_default_host(struct irq_domain *host);
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
* @size: Number of interrupts in the domain.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*/
static inline struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
irq_domain: Replace irq_alloc_host() with revmap-specific initializers Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:54 +08:00
unsigned int size,
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
const struct irq_domain_ops *ops,
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
void *host_data)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
return __irq_domain_add(of_node, size, size, 0, ops, host_data);
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
}
static inline struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
irq_domain: Move irq_virq_count into NOMAP revmap This patch replaces the old global setting of irq_virq_count that is only used by the NOMAP mapping and instead uses a revmap_data property so that the maximum NOMAP allocation can be set per NOMAP irq_domain. There is exactly one user of irq_virq_count in-tree right now: PS3. Also, irq_virq_count is only useful for the NOMAP mapping. So, instead of having a single global irq_virq_count values, this change drops it entirely and added a max_irq argument to irq_domain_add_nomap(). That makes it a property of an individual nomap irq domain instead of a global system settting. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com>
2012-02-16 06:06:08 +08:00
unsigned int max_irq,
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
const struct irq_domain_ops *ops,
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
void *host_data)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
return __irq_domain_add(of_node, 0, max_irq, max_irq, ops, host_data);
irqdomain: Clean up aftermath of irq_domain refactoring After refactoring the irqdomain code, there are a number of API functions that are merely empty wrappers around core code. Drop those wrappers out of the C file and replace them with static inlines in the header. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-08 19:57:40 +08:00
}
irq_domain: Add support for base irq and hwirq in legacy mappings Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:55 +08:00
static inline struct irq_domain *irq_domain_add_legacy_isa(
struct device_node *of_node,
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
const struct irq_domain_ops *ops,
irq_domain: Add support for base irq and hwirq in legacy mappings Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-15 05:06:55 +08:00
void *host_data)
{
return irq_domain_add_legacy(of_node, NUM_ISA_INTERRUPTS, 0, 0, ops,
host_data);
}
irqdomain: merge linear and tree reverse mappings. Keeping them separate makes irq_domain more complex and adds a lot of code (as proven by the diffstat). Merging them simplifies the whole scheme. This change makes it so both the tree and linear methods can be used by the same irq_domain instance. If the hwirq is less than the ->linear_size, then the linear map is used to reverse map the hwirq. Otherwise the radix tree is used. The test for which map to use is no more expensive that the existing code, so the performance of fast path is preserved. It also means that complex interrupt controllers can use both the linear map and a tree in the same domain. This may be useful for an interrupt controller with a base set of core irqs and a large number of GPIOs which might be used as irqs. The linear map could cover the core irqs, and the tree used for thas irqs. The linear map could cover the core irqs, and the tree used for the gpios. v2: Drop reorganization of revmap data Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-12 00:24:31 +08:00
static inline struct irq_domain *irq_domain_add_tree(struct device_node *of_node,
const struct irq_domain_ops *ops,
void *host_data)
{
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
return __irq_domain_add(of_node, 0, ~0, 0, ops, host_data);
irqdomain: merge linear and tree reverse mappings. Keeping them separate makes irq_domain more complex and adds a lot of code (as proven by the diffstat). Merging them simplifies the whole scheme. This change makes it so both the tree and linear methods can be used by the same irq_domain instance. If the hwirq is less than the ->linear_size, then the linear map is used to reverse map the hwirq. Otherwise the radix tree is used. The test for which map to use is no more expensive that the existing code, so the performance of fast path is preserved. It also means that complex interrupt controllers can use both the linear map and a tree in the same domain. This may be useful for an interrupt controller with a base set of core irqs and a large number of GPIOs which might be used as irqs. The linear map could cover the core irqs, and the tree used for thas irqs. The linear map could cover the core irqs, and the tree used for the gpios. v2: Drop reorganization of revmap data Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-07-12 00:24:31 +08:00
}
irqdomain: Support removal of IRQ domains. Now that IRQ domains are being used by modules it's necessary to support removing them, too. This adds a new irq_domain_remove() routine for doing the bulk of the heavy lifting. It's left as an exercise to the caller to ensure all mappings have been appropriatey disposed of before attempting to remove the domain. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-19 14:11:41 +08:00
extern void irq_domain_remove(struct irq_domain *host);
irqdomain: Refactor irq_domain_associate_many() Originally, irq_domain_associate_many() was designed to unwind the mapped irqs on a failure of any individual association. However, that proved to be a problem with certain IRQ controllers. Some of them only support a subset of irqs, and will fail when attempting to map a reserved IRQ. In those cases we want to map as many IRQs as possible, so instead it is better for irq_domain_associate_many() to make a best-effort attempt to map irqs, but not fail if any or all of them don't succeed. If a caller really cares about how many irqs got associated, then it should instead go back and check that all of the irqs is cares about were mapped. The original design open-coded the individual association code into the body of irq_domain_associate_many(), but with no longer needing to unwind associations, the code becomes simpler to split out irq_domain_associate() to contain the bulk of the logic, and irq_domain_associate_many() to be a simple loop wrapper. This patch also adds a new error check to the associate path to make sure it isn't called for an irq larger than the controller can handle, and adds locking so that the irq_domain_mutex is held while setting up a new association. v3: Fixup missing change to irq_domain_add_tree() v2: Fixup x86 warning. irq_domain_associate_many() no longer returns an error code, but reports errors to the printk log directly. In the majority of cases we don't actually want to fail if there is a problem, but rather log it and still try to boot the system. Signed-off-by: Grant Likely <grant.likely@linaro.org> irqdomain: Fix flubbed irq_domain_associate_many refactoring commit d39046ec72, "irqdomain: Refactor irq_domain_associate_many()" was missing the following hunk which causes a boot failure on anything using irq_domain_add_tree() to allocate an irq domain. Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2013-06-10 08:06:02 +08:00
extern int irq_domain_associate(struct irq_domain *domain, unsigned int irq,
irq_hw_number_t hwirq);
extern void irq_domain_associate_many(struct irq_domain *domain,
unsigned int irq_base,
irq_hw_number_t hwirq_base, int count);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
irq_domain: Move irq_domain code from powerpc to kernel/irq This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-16 16:37:49 +08:00
extern unsigned int irq_create_mapping(struct irq_domain *host,
irq_hw_number_t hwirq);
extern void irq_dispose_mapping(unsigned int virq);
irqdomain: make irq_linear_revmap() a fast path again Over the years, irq_linear_revmap() gained tests and checks to make sure callers were using it safely, which while important, also make it less of a fast path. After the irqdomain refactoring done recently, it is now possible to make irq_linear_revmap() a fast path again. This patch moves irq_linear_revmap() to the header file and makes it a static inline so that interrupt controller drivers using a linear mapping can decode the virq from a hwirq in just a couple of instructions. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-10 19:19:17 +08:00
/**
* irq_linear_revmap() - Find a linux irq from a hw irq number.
* @domain: domain owning this hardware interrupt
* @hwirq: hardware irq number in that domain space
*
* This is a fast path alternative to irq_find_mapping() that can be
* called directly by irq controller code to save a handful of
* instructions. It is always safe to call, but won't find irqs mapped
* using the radix tree.
*/
static inline unsigned int irq_linear_revmap(struct irq_domain *domain,
irq_hw_number_t hwirq)
{
return hwirq < domain->revmap_size ? domain->linear_revmap[hwirq] : 0;
}
irq_domain: Move irq_domain code from powerpc to kernel/irq This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-02-16 16:37:49 +08:00
extern unsigned int irq_find_mapping(struct irq_domain *host,
irq_hw_number_t hwirq);
extern unsigned int irq_create_direct_mapping(struct irq_domain *host);
irqdomain: Support for static IRQ mapping and association. This adds a new strict mapping API for supporting creation of linux IRQs at existing positions within the domain. The new routines are as follows: For dynamic allocation and insertion to specified ranges: - irq_create_identity_mapping() - irq_create_strict_mappings() These will allocate and associate a range of linux IRQs at the specified location. This can be used by controllers that have their own static linux IRQ definitions to map a hwirq range to, as well as for platforms that wish to establish 1:1 identity mapping between linux and hwirq space. For insertion to specified ranges by platforms that do their own irq_desc management: - irq_domain_associate() - irq_domain_associate_many() These in turn call back in to the domain's ->map() routine, for further processing by the platform. Disassociation of IRQs get handled through irq_dispose_mapping() as normal. With these in place it should be possible to begin migration of legacy IRQ domains to linear ones, without requiring special handling for static vs dynamic IRQ definitions in DT vs non-DT paths. This also makes it possible for domains with static mappings to adopt whichever tree model best fits their needs, rather than simply restricting them to linear revmaps. Signed-off-by: Paul Mundt <lethal@linux-sh.org> [grant.likely: Reorganized irq_domain_associate{,_many} to have all logic in one place] [grant.likely: Add error checking for unallocated irq_descs at associate time] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com>
2012-06-18 06:17:04 +08:00
extern int irq_create_strict_mappings(struct irq_domain *domain,
unsigned int irq_base,
irq_hw_number_t hwirq_base, int count);
static inline int irq_create_identity_mapping(struct irq_domain *host,
irq_hw_number_t hwirq)
{
return irq_create_strict_mappings(host, hwirq, hwirq, 1);
}
irq_domain: constify irq_domain_ops Make irq_domain_ops pointer a constant to make it safer for multiple instances to share the same ops pointer and change the irq_domain code so that it does not modify the ops. v4: Fix mismatched type reference in powerpc code Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 03:12:14 +08:00
extern const struct irq_domain_ops irq_domain_simple_ops;
irq_domain: Create common xlate functions that device drivers can use Rather than having each interrupt controller driver creating its own barely unique .xlate function for irq_domain, create a library of translators which any driver can use directly. v5: - Remove irq_domain_xlate_pci(). It was incorrect. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
2012-01-27 02:26:52 +08:00
/* stock xlate functions */
int irq_domain_xlate_onecell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_xlate_twocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
int irq_domain_xlate_onetwocell(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type);
irq_domain: Centralize definition of irq_dispose_mapping() Several architectures define their own empty irq_dispose_mapping(). Since the irq_domain code is centralized now, there is little need to do so. This patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is selected. The patch also means that IRQ_DOMAIN becomes selectable on all architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jonas Bonn <jonas@southpole.se> Cc: sparclinux@vger.kernel.org Cc: linux@lists.openrisc.net
2012-02-24 23:24:17 +08:00
#else /* CONFIG_IRQ_DOMAIN */
static inline void irq_dispose_mapping(unsigned int virq) { }
#endif /* !CONFIG_IRQ_DOMAIN */
dt/irq: add irq_domain_generate_simple() helper irq_domain_generate_simple() is an easy way to generate an irq translation domain for simple irq controllers. It assumes a flat 1:1 mapping from hardware irq number to an offset of the first linux irq number assigned to the controller Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
irq: add irq_domain translation infrastructure This patch adds irq_domain infrastructure for translating from hardware irq numbers to linux irqs. This is particularly important for architectures adding device tree support because the current implementation (excluding PowerPC and SPARC) cannot handle translation for more than a single interrupt controller. irq_domain supports device tree translation for any number of interrupt controllers. This patch converts x86, Microblaze, ARM and MIPS to use irq_domain for device tree irq translation. x86 is untested beyond compiling it, irq_domain is enabled for MIPS and Microblaze, but the old behaviour is preserved until the core code is modified to actually register an irq_domain yet. On ARM it works and is required for much of the new ARM device tree board support. PowerPC has /not/ been converted to use this new infrastructure. It is still missing some features before it can replace the virq infrastructure already in powerpc (see documentation on irq_domain_map/unmap for details). Followup patches will add the missing pieces and migrate PowerPC to use irq_domain. SPARC has its own method of managing interrupts from the device tree and is unaffected by this change. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-26 17:19:06 +08:00
#endif /* _LINUX_IRQDOMAIN_H */