linux-sg2042/drivers/scsi/aic94xx/aic94xx_hwi.c

1391 lines
38 KiB
C
Raw Normal View History

[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
/*
* Aic94xx SAS/SATA driver hardware interface.
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This file is part of the aic94xx driver.
*
* The aic94xx driver is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the
* License.
*
* The aic94xx driver is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with the aic94xx driver; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/firmware.h>
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_hwi.h"
#include "aic94xx_seq.h"
#include "aic94xx_dump.h"
u32 MBAR0_SWB_SIZE;
/* ---------- Initialization ---------- */
static int asd_get_user_sas_addr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
/* adapter came with a sas address */
if (asd_ha->hw_prof.sas_addr[0])
return 0;
return sas_request_addr(asd_ha->sas_ha.core.shost,
asd_ha->hw_prof.sas_addr);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
}
static void asd_propagate_sas_addr(struct asd_ha_struct *asd_ha)
{
int i;
for (i = 0; i < ASD_MAX_PHYS; i++) {
if (asd_ha->hw_prof.phy_desc[i].sas_addr[0] == 0)
continue;
/* Set a phy's address only if it has none.
*/
ASD_DPRINTK("setting phy%d addr to %llx\n", i,
SAS_ADDR(asd_ha->hw_prof.sas_addr));
memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr,
asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
}
}
/* ---------- PHY initialization ---------- */
static void asd_init_phy_identify(struct asd_phy *phy)
{
phy->identify_frame = phy->id_frm_tok->vaddr;
memset(phy->identify_frame, 0, sizeof(*phy->identify_frame));
phy->identify_frame->dev_type = SAS_END_DEV;
if (phy->sas_phy.role & PHY_ROLE_INITIATOR)
phy->identify_frame->initiator_bits = phy->sas_phy.iproto;
if (phy->sas_phy.role & PHY_ROLE_TARGET)
phy->identify_frame->target_bits = phy->sas_phy.tproto;
memcpy(phy->identify_frame->sas_addr, phy->phy_desc->sas_addr,
SAS_ADDR_SIZE);
phy->identify_frame->phy_id = phy->sas_phy.id;
}
static int asd_init_phy(struct asd_phy *phy)
{
struct asd_ha_struct *asd_ha = phy->sas_phy.ha->lldd_ha;
struct asd_sas_phy *sas_phy = &phy->sas_phy;
sas_phy->enabled = 1;
sas_phy->class = SAS;
sas_phy->iproto = SAS_PROTOCOL_ALL;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
sas_phy->tproto = 0;
sas_phy->type = PHY_TYPE_PHYSICAL;
sas_phy->role = PHY_ROLE_INITIATOR;
sas_phy->oob_mode = OOB_NOT_CONNECTED;
sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
phy->id_frm_tok = asd_alloc_coherent(asd_ha,
sizeof(*phy->identify_frame),
GFP_KERNEL);
if (!phy->id_frm_tok) {
asd_printk("no mem for IDENTIFY for phy%d\n", sas_phy->id);
return -ENOMEM;
} else
asd_init_phy_identify(phy);
memset(phy->frame_rcvd, 0, sizeof(phy->frame_rcvd));
return 0;
}
static void asd_init_ports(struct asd_ha_struct *asd_ha)
{
int i;
spin_lock_init(&asd_ha->asd_ports_lock);
for (i = 0; i < ASD_MAX_PHYS; i++) {
struct asd_port *asd_port = &asd_ha->asd_ports[i];
memset(asd_port->sas_addr, 0, SAS_ADDR_SIZE);
memset(asd_port->attached_sas_addr, 0, SAS_ADDR_SIZE);
asd_port->phy_mask = 0;
asd_port->num_phys = 0;
}
}
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
static int asd_init_phys(struct asd_ha_struct *asd_ha)
{
u8 i;
u8 phy_mask = asd_ha->hw_prof.enabled_phys;
for (i = 0; i < ASD_MAX_PHYS; i++) {
struct asd_phy *phy = &asd_ha->phys[i];
phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
phy->asd_port = NULL;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
phy->sas_phy.enabled = 0;
phy->sas_phy.id = i;
phy->sas_phy.sas_addr = &phy->phy_desc->sas_addr[0];
phy->sas_phy.frame_rcvd = &phy->frame_rcvd[0];
phy->sas_phy.ha = &asd_ha->sas_ha;
phy->sas_phy.lldd_phy = phy;
}
/* Now enable and initialize only the enabled phys. */
for_each_phy(phy_mask, phy_mask, i) {
int err = asd_init_phy(&asd_ha->phys[i]);
if (err)
return err;
}
return 0;
}
/* ---------- Sliding windows ---------- */
static int asd_init_sw(struct asd_ha_struct *asd_ha)
{
struct pci_dev *pcidev = asd_ha->pcidev;
int err;
u32 v;
/* Unlock MBARs */
err = pci_read_config_dword(pcidev, PCI_CONF_MBAR_KEY, &v);
if (err) {
asd_printk("couldn't access conf. space of %s\n",
pci_name(pcidev));
goto Err;
}
if (v)
err = pci_write_config_dword(pcidev, PCI_CONF_MBAR_KEY, v);
if (err) {
asd_printk("couldn't write to MBAR_KEY of %s\n",
pci_name(pcidev));
goto Err;
}
/* Set sliding windows A, B and C to point to proper internal
* memory regions.
*/
pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWA, REG_BASE_ADDR);
pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWB,
REG_BASE_ADDR_CSEQCIO);
pci_write_config_dword(pcidev, PCI_CONF_MBAR0_SWC, REG_BASE_ADDR_EXSI);
asd_ha->io_handle[0].swa_base = REG_BASE_ADDR;
asd_ha->io_handle[0].swb_base = REG_BASE_ADDR_CSEQCIO;
asd_ha->io_handle[0].swc_base = REG_BASE_ADDR_EXSI;
MBAR0_SWB_SIZE = asd_ha->io_handle[0].len - 0x80;
if (!asd_ha->iospace) {
/* MBAR1 will point to OCM (On Chip Memory) */
pci_write_config_dword(pcidev, PCI_CONF_MBAR1, OCM_BASE_ADDR);
asd_ha->io_handle[1].swa_base = OCM_BASE_ADDR;
}
spin_lock_init(&asd_ha->iolock);
Err:
return err;
}
/* ---------- SCB initialization ---------- */
/**
* asd_init_scbs - manually allocate the first SCB.
* @asd_ha: pointer to host adapter structure
*
* This allocates the very first SCB which would be sent to the
* sequencer for execution. Its bus address is written to
* CSEQ_Q_NEW_POINTER, mode page 2, mode 8. Since the bus address of
* the _next_ scb to be DMA-ed to the host adapter is read from the last
* SCB DMA-ed to the host adapter, we have to always stay one step
* ahead of the sequencer and keep one SCB already allocated.
*/
static int asd_init_scbs(struct asd_ha_struct *asd_ha)
{
struct asd_seq_data *seq = &asd_ha->seq;
int bitmap_bytes;
/* allocate the index array and bitmap */
asd_ha->seq.tc_index_bitmap_bits = asd_ha->hw_prof.max_scbs;
asd_ha->seq.tc_index_array = kzalloc(asd_ha->seq.tc_index_bitmap_bits*
sizeof(void *), GFP_KERNEL);
if (!asd_ha->seq.tc_index_array)
return -ENOMEM;
bitmap_bytes = (asd_ha->seq.tc_index_bitmap_bits+7)/8;
bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
asd_ha->seq.tc_index_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
if (!asd_ha->seq.tc_index_bitmap)
return -ENOMEM;
spin_lock_init(&seq->tc_index_lock);
seq->next_scb.size = sizeof(struct scb);
seq->next_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool, GFP_KERNEL,
&seq->next_scb.dma_handle);
if (!seq->next_scb.vaddr) {
kfree(asd_ha->seq.tc_index_bitmap);
kfree(asd_ha->seq.tc_index_array);
asd_ha->seq.tc_index_bitmap = NULL;
asd_ha->seq.tc_index_array = NULL;
return -ENOMEM;
}
seq->pending = 0;
spin_lock_init(&seq->pend_q_lock);
INIT_LIST_HEAD(&seq->pend_q);
return 0;
}
static void asd_get_max_scb_ddb(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
asd_ha->hw_prof.max_scbs = asd_get_cmdctx_size(asd_ha)/ASD_SCB_SIZE;
asd_ha->hw_prof.max_ddbs = asd_get_devctx_size(asd_ha)/ASD_DDB_SIZE;
ASD_DPRINTK("max_scbs:%d, max_ddbs:%d\n",
asd_ha->hw_prof.max_scbs,
asd_ha->hw_prof.max_ddbs);
}
/* ---------- Done List initialization ---------- */
static void asd_dl_tasklet_handler(unsigned long);
static int asd_init_dl(struct asd_ha_struct *asd_ha)
{
asd_ha->seq.actual_dl
= asd_alloc_coherent(asd_ha,
ASD_DL_SIZE * sizeof(struct done_list_struct),
GFP_KERNEL);
if (!asd_ha->seq.actual_dl)
return -ENOMEM;
asd_ha->seq.dl = asd_ha->seq.actual_dl->vaddr;
asd_ha->seq.dl_toggle = ASD_DEF_DL_TOGGLE;
asd_ha->seq.dl_next = 0;
tasklet_init(&asd_ha->seq.dl_tasklet, asd_dl_tasklet_handler,
(unsigned long) asd_ha);
return 0;
}
/* ---------- EDB and ESCB init ---------- */
static int asd_alloc_edbs(struct asd_ha_struct *asd_ha, gfp_t gfp_flags)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_seq_data *seq = &asd_ha->seq;
int i;
seq->edb_arr = kmalloc(seq->num_edbs*sizeof(*seq->edb_arr), gfp_flags);
if (!seq->edb_arr)
return -ENOMEM;
for (i = 0; i < seq->num_edbs; i++) {
seq->edb_arr[i] = asd_alloc_coherent(asd_ha, ASD_EDB_SIZE,
gfp_flags);
if (!seq->edb_arr[i])
goto Err_unroll;
memset(seq->edb_arr[i]->vaddr, 0, ASD_EDB_SIZE);
}
ASD_DPRINTK("num_edbs:%d\n", seq->num_edbs);
return 0;
Err_unroll:
for (i-- ; i >= 0; i--)
asd_free_coherent(asd_ha, seq->edb_arr[i]);
kfree(seq->edb_arr);
seq->edb_arr = NULL;
return -ENOMEM;
}
static int asd_alloc_escbs(struct asd_ha_struct *asd_ha,
gfp_t gfp_flags)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_seq_data *seq = &asd_ha->seq;
struct asd_ascb *escb;
int i, escbs;
seq->escb_arr = kmalloc(seq->num_escbs*sizeof(*seq->escb_arr),
gfp_flags);
if (!seq->escb_arr)
return -ENOMEM;
escbs = seq->num_escbs;
escb = asd_ascb_alloc_list(asd_ha, &escbs, gfp_flags);
if (!escb) {
asd_printk("couldn't allocate list of escbs\n");
goto Err;
}
seq->num_escbs -= escbs; /* subtract what was not allocated */
ASD_DPRINTK("num_escbs:%d\n", seq->num_escbs);
for (i = 0; i < seq->num_escbs; i++, escb = list_entry(escb->list.next,
struct asd_ascb,
list)) {
seq->escb_arr[i] = escb;
escb->scb->header.opcode = EMPTY_SCB;
}
return 0;
Err:
kfree(seq->escb_arr);
seq->escb_arr = NULL;
return -ENOMEM;
}
static void asd_assign_edbs2escbs(struct asd_ha_struct *asd_ha)
{
struct asd_seq_data *seq = &asd_ha->seq;
int i, k, z = 0;
for (i = 0; i < seq->num_escbs; i++) {
struct asd_ascb *ascb = seq->escb_arr[i];
struct empty_scb *escb = &ascb->scb->escb;
ascb->edb_index = z;
escb->num_valid = ASD_EDBS_PER_SCB;
for (k = 0; k < ASD_EDBS_PER_SCB; k++) {
struct sg_el *eb = &escb->eb[k];
struct asd_dma_tok *edb = seq->edb_arr[z++];
memset(eb, 0, sizeof(*eb));
eb->bus_addr = cpu_to_le64(((u64) edb->dma_handle));
eb->size = cpu_to_le32(((u32) edb->size));
}
}
}
/**
* asd_init_escbs -- allocate and initialize empty scbs
* @asd_ha: pointer to host adapter structure
*
* An empty SCB has sg_elements of ASD_EDBS_PER_SCB (7) buffers.
* They transport sense data, etc.
*/
static int asd_init_escbs(struct asd_ha_struct *asd_ha)
{
struct asd_seq_data *seq = &asd_ha->seq;
int err = 0;
/* Allocate two empty data buffers (edb) per sequencer. */
int edbs = 2*(1+asd_ha->hw_prof.num_phys);
seq->num_escbs = (edbs+ASD_EDBS_PER_SCB-1)/ASD_EDBS_PER_SCB;
seq->num_edbs = seq->num_escbs * ASD_EDBS_PER_SCB;
err = asd_alloc_edbs(asd_ha, GFP_KERNEL);
if (err) {
asd_printk("couldn't allocate edbs\n");
return err;
}
err = asd_alloc_escbs(asd_ha, GFP_KERNEL);
if (err) {
asd_printk("couldn't allocate escbs\n");
return err;
}
asd_assign_edbs2escbs(asd_ha);
/* In order to insure that normal SCBs do not overfill sequencer
* memory and leave no space for escbs (halting condition),
* we increment pending here by the number of escbs. However,
* escbs are never pending.
*/
seq->pending = seq->num_escbs;
seq->can_queue = 1 + (asd_ha->hw_prof.max_scbs - seq->pending)/2;
return 0;
}
/* ---------- HW initialization ---------- */
/**
* asd_chip_hardrst -- hard reset the chip
* @asd_ha: pointer to host adapter structure
*
* This takes 16 cycles and is synchronous to CFCLK, which runs
* at 200 MHz, so this should take at most 80 nanoseconds.
*/
int asd_chip_hardrst(struct asd_ha_struct *asd_ha)
{
int i;
int count = 100;
u32 reg;
for (i = 0 ; i < 4 ; i++) {
asd_write_reg_dword(asd_ha, COMBIST, HARDRST);
}
do {
udelay(1);
reg = asd_read_reg_dword(asd_ha, CHIMINT);
if (reg & HARDRSTDET) {
asd_write_reg_dword(asd_ha, CHIMINT,
HARDRSTDET|PORRSTDET);
return 0;
}
} while (--count > 0);
return -ENODEV;
}
/**
* asd_init_chip -- initialize the chip
* @asd_ha: pointer to host adapter structure
*
* Hard resets the chip, disables HA interrupts, downloads the sequnecer
* microcode and starts the sequencers. The caller has to explicitly
* enable HA interrupts with asd_enable_ints(asd_ha).
*/
static int asd_init_chip(struct asd_ha_struct *asd_ha)
{
int err;
err = asd_chip_hardrst(asd_ha);
if (err) {
asd_printk("couldn't hard reset %s\n",
pci_name(asd_ha->pcidev));
goto out;
}
asd_disable_ints(asd_ha);
err = asd_init_seqs(asd_ha);
if (err) {
asd_printk("couldn't init seqs for %s\n",
pci_name(asd_ha->pcidev));
goto out;
}
err = asd_start_seqs(asd_ha);
if (err) {
asd_printk("coudln't start seqs for %s\n",
pci_name(asd_ha->pcidev));
goto out;
}
out:
return err;
}
#define MAX_DEVS ((OCM_MAX_SIZE) / (ASD_DDB_SIZE))
static int max_devs = 0;
module_param_named(max_devs, max_devs, int, S_IRUGO);
MODULE_PARM_DESC(max_devs, "\n"
"\tMaximum number of SAS devices to support (not LUs).\n"
"\tDefault: 2176, Maximum: 65663.\n");
static int max_cmnds = 0;
module_param_named(max_cmnds, max_cmnds, int, S_IRUGO);
MODULE_PARM_DESC(max_cmnds, "\n"
"\tMaximum number of commands queuable.\n"
"\tDefault: 512, Maximum: 66047.\n");
static void asd_extend_devctx_ocm(struct asd_ha_struct *asd_ha)
{
unsigned long dma_addr = OCM_BASE_ADDR;
u32 d;
dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
asd_write_reg_addr(asd_ha, DEVCTXBASE, (dma_addr_t) dma_addr);
d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
d |= 4;
asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
asd_ha->hw_prof.max_ddbs += MAX_DEVS;
}
static int asd_extend_devctx(struct asd_ha_struct *asd_ha)
{
dma_addr_t dma_handle;
unsigned long dma_addr;
u32 d;
int size;
asd_extend_devctx_ocm(asd_ha);
asd_ha->hw_prof.ddb_ext = NULL;
if (max_devs <= asd_ha->hw_prof.max_ddbs || max_devs > 0xFFFF) {
max_devs = asd_ha->hw_prof.max_ddbs;
return 0;
}
size = (max_devs - asd_ha->hw_prof.max_ddbs + 1) * ASD_DDB_SIZE;
asd_ha->hw_prof.ddb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
if (!asd_ha->hw_prof.ddb_ext) {
asd_printk("couldn't allocate memory for %d devices\n",
max_devs);
max_devs = asd_ha->hw_prof.max_ddbs;
return -ENOMEM;
}
dma_handle = asd_ha->hw_prof.ddb_ext->dma_handle;
dma_addr = ALIGN((unsigned long) dma_handle, ASD_DDB_SIZE);
dma_addr -= asd_ha->hw_prof.max_ddbs * ASD_DDB_SIZE;
dma_handle = (dma_addr_t) dma_addr;
asd_write_reg_addr(asd_ha, DEVCTXBASE, dma_handle);
d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
d &= ~4;
asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
asd_ha->hw_prof.max_ddbs = max_devs;
return 0;
}
static int asd_extend_cmdctx(struct asd_ha_struct *asd_ha)
{
dma_addr_t dma_handle;
unsigned long dma_addr;
u32 d;
int size;
asd_ha->hw_prof.scb_ext = NULL;
if (max_cmnds <= asd_ha->hw_prof.max_scbs || max_cmnds > 0xFFFF) {
max_cmnds = asd_ha->hw_prof.max_scbs;
return 0;
}
size = (max_cmnds - asd_ha->hw_prof.max_scbs + 1) * ASD_SCB_SIZE;
asd_ha->hw_prof.scb_ext = asd_alloc_coherent(asd_ha, size, GFP_KERNEL);
if (!asd_ha->hw_prof.scb_ext) {
asd_printk("couldn't allocate memory for %d commands\n",
max_cmnds);
max_cmnds = asd_ha->hw_prof.max_scbs;
return -ENOMEM;
}
dma_handle = asd_ha->hw_prof.scb_ext->dma_handle;
dma_addr = ALIGN((unsigned long) dma_handle, ASD_SCB_SIZE);
dma_addr -= asd_ha->hw_prof.max_scbs * ASD_SCB_SIZE;
dma_handle = (dma_addr_t) dma_addr;
asd_write_reg_addr(asd_ha, CMDCTXBASE, dma_handle);
d = asd_read_reg_dword(asd_ha, CTXDOMAIN);
d &= ~1;
asd_write_reg_dword(asd_ha, CTXDOMAIN, d);
asd_ha->hw_prof.max_scbs = max_cmnds;
return 0;
}
/**
* asd_init_ctxmem -- initialize context memory
* asd_ha: pointer to host adapter structure
*
* This function sets the maximum number of SCBs and
* DDBs which can be used by the sequencer. This is normally
* 512 and 128 respectively. If support for more SCBs or more DDBs
* is required then CMDCTXBASE, DEVCTXBASE and CTXDOMAIN are
* initialized here to extend context memory to point to host memory,
* thus allowing unlimited support for SCBs and DDBs -- only limited
* by host memory.
*/
static int asd_init_ctxmem(struct asd_ha_struct *asd_ha)
{
int bitmap_bytes;
asd_get_max_scb_ddb(asd_ha);
asd_extend_devctx(asd_ha);
asd_extend_cmdctx(asd_ha);
/* The kernel wants bitmaps to be unsigned long sized. */
bitmap_bytes = (asd_ha->hw_prof.max_ddbs+7)/8;
bitmap_bytes = BITS_TO_LONGS(bitmap_bytes*8)*sizeof(unsigned long);
asd_ha->hw_prof.ddb_bitmap = kzalloc(bitmap_bytes, GFP_KERNEL);
if (!asd_ha->hw_prof.ddb_bitmap)
return -ENOMEM;
spin_lock_init(&asd_ha->hw_prof.ddb_lock);
return 0;
}
int asd_init_hw(struct asd_ha_struct *asd_ha)
{
int err;
u32 v;
err = asd_init_sw(asd_ha);
if (err)
return err;
err = pci_read_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL, &v);
if (err) {
asd_printk("couldn't read PCIC_HSTPCIX_CNTRL of %s\n",
pci_name(asd_ha->pcidev));
return err;
}
pci_write_config_dword(asd_ha->pcidev, PCIC_HSTPCIX_CNTRL,
v | SC_TMR_DIS);
if (err) {
asd_printk("couldn't disable split completion timer of %s\n",
pci_name(asd_ha->pcidev));
return err;
}
err = asd_read_ocm(asd_ha);
if (err) {
asd_printk("couldn't read ocm(%d)\n", err);
/* While suspicios, it is not an error that we
* couldn't read the OCM. */
}
err = asd_read_flash(asd_ha);
if (err) {
asd_printk("couldn't read flash(%d)\n", err);
/* While suspicios, it is not an error that we
* couldn't read FLASH memory.
*/
}
asd_init_ctxmem(asd_ha);
if (asd_get_user_sas_addr(asd_ha)) {
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
asd_printk("No SAS Address provided for %s\n",
pci_name(asd_ha->pcidev));
err = -ENODEV;
goto Out;
}
asd_propagate_sas_addr(asd_ha);
err = asd_init_phys(asd_ha);
if (err) {
asd_printk("couldn't initialize phys for %s\n",
pci_name(asd_ha->pcidev));
goto Out;
}
asd_init_ports(asd_ha);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
err = asd_init_scbs(asd_ha);
if (err) {
asd_printk("couldn't initialize scbs for %s\n",
pci_name(asd_ha->pcidev));
goto Out;
}
err = asd_init_dl(asd_ha);
if (err) {
asd_printk("couldn't initialize the done list:%d\n",
err);
goto Out;
}
err = asd_init_escbs(asd_ha);
if (err) {
asd_printk("couldn't initialize escbs\n");
goto Out;
}
err = asd_init_chip(asd_ha);
if (err) {
asd_printk("couldn't init the chip\n");
goto Out;
}
Out:
return err;
}
/* ---------- Chip reset ---------- */
/**
* asd_chip_reset -- reset the host adapter, etc
* @asd_ha: pointer to host adapter structure of interest
*
* Called from the ISR. Hard reset the chip. Let everything
* timeout. This should be no different than hot-unplugging the
* host adapter. Once everything times out we'll init the chip with
* a call to asd_init_chip() and enable interrupts with asd_enable_ints().
* XXX finish.
*/
static void asd_chip_reset(struct asd_ha_struct *asd_ha)
{
struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
ASD_DPRINTK("chip reset for %s\n", pci_name(asd_ha->pcidev));
asd_chip_hardrst(asd_ha);
sas_ha->notify_ha_event(sas_ha, HAE_RESET);
}
/* ---------- Done List Routines ---------- */
static void asd_dl_tasklet_handler(unsigned long data)
{
struct asd_ha_struct *asd_ha = (struct asd_ha_struct *) data;
struct asd_seq_data *seq = &asd_ha->seq;
unsigned long flags;
while (1) {
struct done_list_struct *dl = &seq->dl[seq->dl_next];
struct asd_ascb *ascb;
if ((dl->toggle & DL_TOGGLE_MASK) != seq->dl_toggle)
break;
/* find the aSCB */
spin_lock_irqsave(&seq->tc_index_lock, flags);
ascb = asd_tc_index_find(seq, (int)le16_to_cpu(dl->index));
spin_unlock_irqrestore(&seq->tc_index_lock, flags);
if (unlikely(!ascb)) {
ASD_DPRINTK("BUG:sequencer:dl:no ascb?!\n");
goto next_1;
} else if (ascb->scb->header.opcode == EMPTY_SCB) {
goto out;
} else if (!ascb->uldd_timer && !del_timer(&ascb->timer)) {
goto next_1;
}
spin_lock_irqsave(&seq->pend_q_lock, flags);
list_del_init(&ascb->list);
seq->pending--;
spin_unlock_irqrestore(&seq->pend_q_lock, flags);
out:
ascb->tasklet_complete(ascb, dl);
next_1:
seq->dl_next = (seq->dl_next + 1) & (ASD_DL_SIZE-1);
if (!seq->dl_next)
seq->dl_toggle ^= DL_TOGGLE_MASK;
}
}
/* ---------- Interrupt Service Routines ---------- */
/**
* asd_process_donelist_isr -- schedule processing of done list entries
* @asd_ha: pointer to host adapter structure
*/
static void asd_process_donelist_isr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
tasklet_schedule(&asd_ha->seq.dl_tasklet);
}
/**
* asd_com_sas_isr -- process device communication interrupt (COMINT)
* @asd_ha: pointer to host adapter structure
*/
static void asd_com_sas_isr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u32 comstat = asd_read_reg_dword(asd_ha, COMSTAT);
/* clear COMSTAT int */
asd_write_reg_dword(asd_ha, COMSTAT, 0xFFFFFFFF);
if (comstat & CSBUFPERR) {
asd_printk("%s: command/status buffer dma parity error\n",
pci_name(asd_ha->pcidev));
} else if (comstat & CSERR) {
int i;
u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
dmaerr &= 0xFF;
asd_printk("%s: command/status dma error, DMAERR: 0x%02x, "
"CSDMAADR: 0x%04x, CSDMAADR+4: 0x%04x\n",
pci_name(asd_ha->pcidev),
dmaerr,
asd_read_reg_dword(asd_ha, CSDMAADR),
asd_read_reg_dword(asd_ha, CSDMAADR+4));
asd_printk("CSBUFFER:\n");
for (i = 0; i < 8; i++) {
asd_printk("%08x %08x %08x %08x\n",
asd_read_reg_dword(asd_ha, CSBUFFER),
asd_read_reg_dword(asd_ha, CSBUFFER+4),
asd_read_reg_dword(asd_ha, CSBUFFER+8),
asd_read_reg_dword(asd_ha, CSBUFFER+12));
}
asd_dump_seq_state(asd_ha, 0);
} else if (comstat & OVLYERR) {
u32 dmaerr = asd_read_reg_dword(asd_ha, DMAERR);
dmaerr = (dmaerr >> 8) & 0xFF;
asd_printk("%s: overlay dma error:0x%x\n",
pci_name(asd_ha->pcidev),
dmaerr);
}
asd_chip_reset(asd_ha);
}
static void asd_arp2_err(struct asd_ha_struct *asd_ha, u32 dchstatus)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
static const char *halt_code[256] = {
"UNEXPECTED_INTERRUPT0",
"UNEXPECTED_INTERRUPT1",
"UNEXPECTED_INTERRUPT2",
"UNEXPECTED_INTERRUPT3",
"UNEXPECTED_INTERRUPT4",
"UNEXPECTED_INTERRUPT5",
"UNEXPECTED_INTERRUPT6",
"UNEXPECTED_INTERRUPT7",
"UNEXPECTED_INTERRUPT8",
"UNEXPECTED_INTERRUPT9",
"UNEXPECTED_INTERRUPT10",
[11 ... 19] = "unknown[11,19]",
"NO_FREE_SCB_AVAILABLE",
"INVALID_SCB_OPCODE",
"INVALID_MBX_OPCODE",
"INVALID_ATA_STATE",
"ATA_QUEUE_FULL",
"ATA_TAG_TABLE_FAULT",
"ATA_TAG_MASK_FAULT",
"BAD_LINK_QUEUE_STATE",
"DMA2CHIM_QUEUE_ERROR",
"EMPTY_SCB_LIST_FULL",
"unknown[30]",
"IN_USE_SCB_ON_FREE_LIST",
"BAD_OPEN_WAIT_STATE",
"INVALID_STP_AFFILIATION",
"unknown[34]",
"EXEC_QUEUE_ERROR",
"TOO_MANY_EMPTIES_NEEDED",
"EMPTY_REQ_QUEUE_ERROR",
"Q_MONIRTT_MGMT_ERROR",
"TARGET_MODE_FLOW_ERROR",
"DEVICE_QUEUE_NOT_FOUND",
"START_IRTT_TIMER_ERROR",
"ABORT_TASK_ILLEGAL_REQ",
[43 ... 255] = "unknown[43,255]"
};
if (dchstatus & CSEQINT) {
u32 arp2int = asd_read_reg_dword(asd_ha, CARP2INT);
if (arp2int & (ARP2WAITTO|ARP2ILLOPC|ARP2PERR|ARP2CIOPERR)) {
asd_printk("%s: CSEQ arp2int:0x%x\n",
pci_name(asd_ha->pcidev),
arp2int);
} else if (arp2int & ARP2HALTC)
asd_printk("%s: CSEQ halted: %s\n",
pci_name(asd_ha->pcidev),
halt_code[(arp2int>>16)&0xFF]);
else
asd_printk("%s: CARP2INT:0x%x\n",
pci_name(asd_ha->pcidev),
arp2int);
}
if (dchstatus & LSEQINT_MASK) {
int lseq;
u8 lseq_mask = dchstatus & LSEQINT_MASK;
for_each_sequencer(lseq_mask, lseq_mask, lseq) {
u32 arp2int = asd_read_reg_dword(asd_ha,
LmARP2INT(lseq));
if (arp2int & (ARP2WAITTO | ARP2ILLOPC | ARP2PERR
| ARP2CIOPERR)) {
asd_printk("%s: LSEQ%d arp2int:0x%x\n",
pci_name(asd_ha->pcidev),
lseq, arp2int);
/* XXX we should only do lseq reset */
} else if (arp2int & ARP2HALTC)
asd_printk("%s: LSEQ%d halted: %s\n",
pci_name(asd_ha->pcidev),
lseq,halt_code[(arp2int>>16)&0xFF]);
else
asd_printk("%s: LSEQ%d ARP2INT:0x%x\n",
pci_name(asd_ha->pcidev), lseq,
arp2int);
}
}
asd_chip_reset(asd_ha);
}
/**
* asd_dch_sas_isr -- process device channel interrupt (DEVINT)
* @asd_ha: pointer to host adapter structure
*/
static void asd_dch_sas_isr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u32 dchstatus = asd_read_reg_dword(asd_ha, DCHSTATUS);
if (dchstatus & CFIFTOERR) {
asd_printk("%s: CFIFTOERR\n", pci_name(asd_ha->pcidev));
asd_chip_reset(asd_ha);
} else
asd_arp2_err(asd_ha, dchstatus);
}
/**
* ads_rbi_exsi_isr -- process external system interface interrupt (INITERR)
* @asd_ha: pointer to host adapter structure
*/
static void asd_rbi_exsi_isr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u32 stat0r = asd_read_reg_dword(asd_ha, ASISTAT0R);
if (!(stat0r & ASIERR)) {
asd_printk("hmm, EXSI interrupted but no error?\n");
return;
}
if (stat0r & ASIFMTERR) {
asd_printk("ASI SEEPROM format error for %s\n",
pci_name(asd_ha->pcidev));
} else if (stat0r & ASISEECHKERR) {
u32 stat1r = asd_read_reg_dword(asd_ha, ASISTAT1R);
asd_printk("ASI SEEPROM checksum 0x%x error for %s\n",
stat1r & CHECKSUM_MASK,
pci_name(asd_ha->pcidev));
} else {
u32 statr = asd_read_reg_dword(asd_ha, ASIERRSTATR);
if (!(statr & CPI2ASIMSTERR_MASK)) {
ASD_DPRINTK("hmm, ASIERR?\n");
return;
} else {
u32 addr = asd_read_reg_dword(asd_ha, ASIERRADDR);
u32 data = asd_read_reg_dword(asd_ha, ASIERRDATAR);
asd_printk("%s: CPI2 xfer err: addr: 0x%x, wdata: 0x%x, "
"count: 0x%x, byteen: 0x%x, targerr: 0x%x "
"master id: 0x%x, master err: 0x%x\n",
pci_name(asd_ha->pcidev),
addr, data,
(statr & CPI2ASIBYTECNT_MASK) >> 16,
(statr & CPI2ASIBYTEEN_MASK) >> 12,
(statr & CPI2ASITARGERR_MASK) >> 8,
(statr & CPI2ASITARGMID_MASK) >> 4,
(statr & CPI2ASIMSTERR_MASK));
}
}
asd_chip_reset(asd_ha);
}
/**
* asd_hst_pcix_isr -- process host interface interrupts
* @asd_ha: pointer to host adapter structure
*
* Asserted on PCIX errors: target abort, etc.
*/
static void asd_hst_pcix_isr(struct asd_ha_struct *asd_ha)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
u16 status;
u32 pcix_status;
u32 ecc_status;
pci_read_config_word(asd_ha->pcidev, PCI_STATUS, &status);
pci_read_config_dword(asd_ha->pcidev, PCIX_STATUS, &pcix_status);
pci_read_config_dword(asd_ha->pcidev, ECC_CTRL_STAT, &ecc_status);
if (status & PCI_STATUS_DETECTED_PARITY)
asd_printk("parity error for %s\n", pci_name(asd_ha->pcidev));
else if (status & PCI_STATUS_REC_MASTER_ABORT)
asd_printk("master abort for %s\n", pci_name(asd_ha->pcidev));
else if (status & PCI_STATUS_REC_TARGET_ABORT)
asd_printk("target abort for %s\n", pci_name(asd_ha->pcidev));
else if (status & PCI_STATUS_PARITY)
asd_printk("data parity for %s\n", pci_name(asd_ha->pcidev));
else if (pcix_status & RCV_SCE) {
asd_printk("received split completion error for %s\n",
pci_name(asd_ha->pcidev));
pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
/* XXX: Abort task? */
return;
} else if (pcix_status & UNEXP_SC) {
asd_printk("unexpected split completion for %s\n",
pci_name(asd_ha->pcidev));
pci_write_config_dword(asd_ha->pcidev,PCIX_STATUS,pcix_status);
/* ignore */
return;
} else if (pcix_status & SC_DISCARD)
asd_printk("split completion discarded for %s\n",
pci_name(asd_ha->pcidev));
else if (ecc_status & UNCOR_ECCERR)
asd_printk("uncorrectable ECC error for %s\n",
pci_name(asd_ha->pcidev));
asd_chip_reset(asd_ha);
}
/**
* asd_hw_isr -- host adapter interrupt service routine
* @irq: ignored
* @dev_id: pointer to host adapter structure
*
* The ISR processes done list entries and level 3 error handling.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
irqreturn_t asd_hw_isr(int irq, void *dev_id)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_ha_struct *asd_ha = dev_id;
u32 chimint = asd_read_reg_dword(asd_ha, CHIMINT);
if (!chimint)
return IRQ_NONE;
asd_write_reg_dword(asd_ha, CHIMINT, chimint);
(void) asd_read_reg_dword(asd_ha, CHIMINT);
if (chimint & DLAVAIL)
asd_process_donelist_isr(asd_ha);
if (chimint & COMINT)
asd_com_sas_isr(asd_ha);
if (chimint & DEVINT)
asd_dch_sas_isr(asd_ha);
if (chimint & INITERR)
asd_rbi_exsi_isr(asd_ha);
if (chimint & HOSTERR)
asd_hst_pcix_isr(asd_ha);
return IRQ_HANDLED;
}
/* ---------- SCB handling ---------- */
static struct asd_ascb *asd_ascb_alloc(struct asd_ha_struct *asd_ha,
gfp_t gfp_flags)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
extern struct kmem_cache *asd_ascb_cache;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
struct asd_seq_data *seq = &asd_ha->seq;
struct asd_ascb *ascb;
unsigned long flags;
ascb = kmem_cache_zalloc(asd_ascb_cache, gfp_flags);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
if (ascb) {
ascb->dma_scb.size = sizeof(struct scb);
ascb->dma_scb.vaddr = dma_pool_alloc(asd_ha->scb_pool,
gfp_flags,
&ascb->dma_scb.dma_handle);
if (!ascb->dma_scb.vaddr) {
kmem_cache_free(asd_ascb_cache, ascb);
return NULL;
}
memset(ascb->dma_scb.vaddr, 0, sizeof(struct scb));
asd_init_ascb(asd_ha, ascb);
spin_lock_irqsave(&seq->tc_index_lock, flags);
ascb->tc_index = asd_tc_index_get(seq, ascb);
spin_unlock_irqrestore(&seq->tc_index_lock, flags);
if (ascb->tc_index == -1)
goto undo;
ascb->scb->header.index = cpu_to_le16((u16)ascb->tc_index);
}
return ascb;
undo:
dma_pool_free(asd_ha->scb_pool, ascb->dma_scb.vaddr,
ascb->dma_scb.dma_handle);
kmem_cache_free(asd_ascb_cache, ascb);
ASD_DPRINTK("no index for ascb\n");
return NULL;
}
/**
* asd_ascb_alloc_list -- allocate a list of aSCBs
* @asd_ha: pointer to host adapter structure
* @num: pointer to integer number of aSCBs
* @gfp_flags: GFP_ flags.
*
* This is the only function which is used to allocate aSCBs.
* It can allocate one or many. If more than one, then they form
* a linked list in two ways: by their list field of the ascb struct
* and by the next_scb field of the scb_header.
*
* Returns NULL if no memory was available, else pointer to a list
* of ascbs. When this function returns, @num would be the number
* of SCBs which were not able to be allocated, 0 if all requested
* were able to be allocated.
*/
struct asd_ascb *asd_ascb_alloc_list(struct asd_ha_struct
*asd_ha, int *num,
gfp_t gfp_flags)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_ascb *first = NULL;
for ( ; *num > 0; --*num) {
struct asd_ascb *ascb = asd_ascb_alloc(asd_ha, gfp_flags);
if (!ascb)
break;
else if (!first)
first = ascb;
else {
struct asd_ascb *last = list_entry(first->list.prev,
struct asd_ascb,
list);
list_add_tail(&ascb->list, &first->list);
last->scb->header.next_scb =
cpu_to_le64(((u64)ascb->dma_scb.dma_handle));
}
}
return first;
}
/**
* asd_swap_head_scb -- swap the head scb
* @asd_ha: pointer to host adapter structure
* @ascb: pointer to the head of an ascb list
*
* The sequencer knows the DMA address of the next SCB to be DMAed to
* the host adapter, from initialization or from the last list DMAed.
* seq->next_scb keeps the address of this SCB. The sequencer will
* DMA to the host adapter this list of SCBs. But the head (first
* element) of this list is not known to the sequencer. Here we swap
* the head of the list with the known SCB (memcpy()).
* Only one memcpy() is required per list so it is in our interest
* to keep the list of SCB as long as possible so that the ratio
* of number of memcpy calls to the number of SCB DMA-ed is as small
* as possible.
*
* LOCKING: called with the pending list lock held.
*/
static void asd_swap_head_scb(struct asd_ha_struct *asd_ha,
struct asd_ascb *ascb)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_seq_data *seq = &asd_ha->seq;
struct asd_ascb *last = list_entry(ascb->list.prev,
struct asd_ascb,
list);
struct asd_dma_tok t = ascb->dma_scb;
memcpy(seq->next_scb.vaddr, ascb->scb, sizeof(*ascb->scb));
ascb->dma_scb = seq->next_scb;
ascb->scb = ascb->dma_scb.vaddr;
seq->next_scb = t;
last->scb->header.next_scb =
cpu_to_le64(((u64)seq->next_scb.dma_handle));
}
/**
* asd_start_timers -- (add and) start timers of SCBs
* @list: pointer to struct list_head of the scbs
* @to: timeout in jiffies
*
* If an SCB in the @list has no timer function, assign the default
* one, then start the timer of the SCB. This function is
* intended to be called from asd_post_ascb_list(), just prior to
* posting the SCBs to the sequencer.
*/
static void asd_start_scb_timers(struct list_head *list)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
{
struct asd_ascb *ascb;
list_for_each_entry(ascb, list, list) {
if (!ascb->uldd_timer) {
ascb->timer.data = (unsigned long) ascb;
ascb->timer.function = asd_ascb_timedout;
ascb->timer.expires = jiffies + AIC94XX_SCB_TIMEOUT;
add_timer(&ascb->timer);
}
}
}
/**
* asd_post_ascb_list -- post a list of 1 or more aSCBs to the host adapter
* @asd_ha: pointer to a host adapter structure
* @ascb: pointer to the first aSCB in the list
* @num: number of aSCBs in the list (to be posted)
*
* See queueing comment in asd_post_escb_list().
*
* Additional note on queuing: In order to minimize the ratio of memcpy()
* to the number of ascbs sent, we try to batch-send as many ascbs as possible
* in one go.
* Two cases are possible:
* A) can_queue >= num,
* B) can_queue < num.
* Case A: we can send the whole batch at once. Increment "pending"
* in the beginning of this function, when it is checked, in order to
* eliminate races when this function is called by multiple processes.
* Case B: should never happen if the managing layer considers
* lldd_queue_size.
*/
int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
int num)
{
unsigned long flags;
LIST_HEAD(list);
int can_queue;
spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
can_queue = asd_ha->hw_prof.max_scbs - asd_ha->seq.pending;
if (can_queue >= num)
asd_ha->seq.pending += num;
else
can_queue = 0;
if (!can_queue) {
spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
asd_printk("%s: scb queue full\n", pci_name(asd_ha->pcidev));
return -SAS_QUEUE_FULL;
}
asd_swap_head_scb(asd_ha, ascb);
__list_add(&list, ascb->list.prev, &ascb->list);
asd_start_scb_timers(&list);
asd_ha->seq.scbpro += num;
list_splice_init(&list, asd_ha->seq.pend_q.prev);
asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
return 0;
}
/**
* asd_post_escb_list -- post a list of 1 or more empty scb
* @asd_ha: pointer to a host adapter structure
* @ascb: pointer to the first empty SCB in the list
* @num: number of aSCBs in the list (to be posted)
*
* This is essentially the same as asd_post_ascb_list, but we do not
* increment pending, add those to the pending list or get indexes.
* See asd_init_escbs() and asd_init_post_escbs().
*
* Since sending a list of ascbs is a superset of sending a single
* ascb, this function exists to generalize this. More specifically,
* when sending a list of those, we want to do only a _single_
* memcpy() at swap head, as opposed to for each ascb sent (in the
* case of sending them one by one). That is, we want to minimize the
* ratio of memcpy() operations to the number of ascbs sent. The same
* logic applies to asd_post_ascb_list().
*/
int asd_post_escb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
int num)
{
unsigned long flags;
spin_lock_irqsave(&asd_ha->seq.pend_q_lock, flags);
asd_swap_head_scb(asd_ha, ascb);
asd_ha->seq.scbpro += num;
asd_write_reg_dword(asd_ha, SCBPRO, (u32)asd_ha->seq.scbpro);
spin_unlock_irqrestore(&asd_ha->seq.pend_q_lock, flags);
return 0;
}
/* ---------- LED ---------- */
/**
* asd_turn_led -- turn on/off an LED
* @asd_ha: pointer to host adapter structure
* @phy_id: the PHY id whose LED we want to manupulate
* @op: 1 to turn on, 0 to turn off
*/
void asd_turn_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
{
if (phy_id < ASD_MAX_PHYS) {
u32 v = asd_read_reg_dword(asd_ha, LmCONTROL(phy_id));
if (op)
v |= LEDPOL;
else
v &= ~LEDPOL;
asd_write_reg_dword(asd_ha, LmCONTROL(phy_id), v);
}
}
/**
* asd_control_led -- enable/disable an LED on the board
* @asd_ha: pointer to host adapter structure
* @phy_id: integer, the phy id
* @op: integer, 1 to enable, 0 to disable the LED
*
* First we output enable the LED, then we set the source
* to be an external module.
*/
void asd_control_led(struct asd_ha_struct *asd_ha, int phy_id, int op)
{
if (phy_id < ASD_MAX_PHYS) {
u32 v;
v = asd_read_reg_dword(asd_ha, GPIOOER);
if (op)
v |= (1 << phy_id);
else
v &= ~(1 << phy_id);
asd_write_reg_dword(asd_ha, GPIOOER, v);
v = asd_read_reg_dword(asd_ha, GPIOCNFGR);
if (op)
v |= (1 << phy_id);
else
v &= ~(1 << phy_id);
asd_write_reg_dword(asd_ha, GPIOCNFGR, v);
}
}
/* ---------- PHY enable ---------- */
static int asd_enable_phy(struct asd_ha_struct *asd_ha, int phy_id)
{
struct asd_phy *phy = &asd_ha->phys[phy_id];
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, INT_ENABLE_2), 0);
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, HOT_PLUG_DELAY),
HOTPLUG_DELAY_TIMEOUT);
/* Get defaults from manuf. sector */
/* XXX we need defaults for those in case MS is broken. */
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_0),
phy->phy_desc->phy_control_0);
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_1),
phy->phy_desc->phy_control_1);
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_2),
phy->phy_desc->phy_control_2);
asd_write_reg_byte(asd_ha, LmSEQ_OOB_REG(phy_id, PHY_CONTROL_3),
phy->phy_desc->phy_control_3);
asd_write_reg_dword(asd_ha, LmSEQ_TEN_MS_COMINIT_TIMEOUT(phy_id),
ASD_COMINIT_TIMEOUT);
asd_write_reg_addr(asd_ha, LmSEQ_TX_ID_ADDR_FRAME(phy_id),
phy->id_frm_tok->dma_handle);
asd_control_led(asd_ha, phy_id, 1);
return 0;
}
int asd_enable_phys(struct asd_ha_struct *asd_ha, const u8 phy_mask)
{
u8 phy_m;
u8 i;
int num = 0, k;
struct asd_ascb *ascb;
struct asd_ascb *ascb_list;
if (!phy_mask) {
asd_printk("%s called with phy_mask of 0!?\n", __func__);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 22:22:51 +08:00
return 0;
}
for_each_phy(phy_mask, phy_m, i) {
num++;
asd_enable_phy(asd_ha, i);
}
k = num;
ascb_list = asd_ascb_alloc_list(asd_ha, &k, GFP_KERNEL);
if (!ascb_list) {
asd_printk("no memory for control phy ascb list\n");
return -ENOMEM;
}
num -= k;
ascb = ascb_list;
for_each_phy(phy_mask, phy_m, i) {
asd_build_control_phy(ascb, i, ENABLE_PHY);
ascb = list_entry(ascb->list.next, struct asd_ascb, list);
}
ASD_DPRINTK("posting %d control phy scbs\n", num);
k = asd_post_ascb_list(asd_ha, ascb_list, num);
if (k)
asd_ascb_free_list(ascb_list);
return k;
}