linux-sg2042/include/linux/vga_switcheroo.h

200 lines
8.6 KiB
C
Raw Normal View History

vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
/*
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
* Copyright (c) 2010 Red Hat Inc.
* Author : Dave Airlie <airlied@redhat.com>
*
* Copyright (c) 2015 Lukas Wunner <lukas@wunner.de>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS
* IN THE SOFTWARE.
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
*
*/
#ifndef _LINUX_VGA_SWITCHEROO_H_
#define _LINUX_VGA_SWITCHEROO_H_
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
#include <linux/fb.h>
struct pci_dev;
/**
* enum vga_switcheroo_handler_flags_t - handler flags bitmask
* @VGA_SWITCHEROO_CAN_SWITCH_DDC: whether the handler is able to switch the
* DDC lines separately. This signals to clients that they should call
* drm_get_edid_switcheroo() to probe the EDID
* @VGA_SWITCHEROO_NEEDS_EDP_CONFIG: whether the handler is unable to switch
* the AUX channel separately. This signals to clients that the active
* GPU needs to train the link and communicate the link parameters to the
* inactive GPU (mediated by vga_switcheroo). The inactive GPU may then
* skip the AUX handshake and set up its output with these pre-calibrated
* values (DisplayPort specification v1.1a, section 2.5.3.3)
*
* Handler flags bitmask. Used by handlers to declare their capabilities upon
* registering with vga_switcheroo.
*/
enum vga_switcheroo_handler_flags_t {
VGA_SWITCHEROO_CAN_SWITCH_DDC = (1 << 0),
VGA_SWITCHEROO_NEEDS_EDP_CONFIG = (1 << 1),
};
/**
* enum vga_switcheroo_state - client power state
* @VGA_SWITCHEROO_OFF: off
* @VGA_SWITCHEROO_ON: on
* @VGA_SWITCHEROO_NOT_FOUND: client has not registered with vga_switcheroo.
* Only used in vga_switcheroo_get_client_state() which in turn is only
* called from hda_intel.c
*
* Client power state.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
enum vga_switcheroo_state {
VGA_SWITCHEROO_OFF,
VGA_SWITCHEROO_ON,
/* below are referred only from vga_switcheroo_get_client_state() */
VGA_SWITCHEROO_NOT_FOUND,
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
};
/**
* enum vga_switcheroo_client_id - client identifier
* @VGA_SWITCHEROO_UNKNOWN_ID: initial identifier assigned to vga clients.
* Determining the id requires the handler, so GPUs are given their
* true id in a delayed fashion in vga_switcheroo_enable()
* @VGA_SWITCHEROO_IGD: integrated graphics device
* @VGA_SWITCHEROO_DIS: discrete graphics device
* @VGA_SWITCHEROO_MAX_CLIENTS: currently no more than two GPUs are supported
*
* Client identifier. Audio clients use the same identifier & 0x100.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
enum vga_switcheroo_client_id {
VGA_SWITCHEROO_UNKNOWN_ID = 0x1000,
VGA_SWITCHEROO_IGD = 0,
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
VGA_SWITCHEROO_DIS,
VGA_SWITCHEROO_MAX_CLIENTS,
};
/**
* struct vga_switcheroo_handler - handler callbacks
* @init: initialize handler.
* Optional. This gets called when vga_switcheroo is enabled, i.e. when
* two vga clients have registered. It allows the handler to perform
* some delayed initialization that depends on the existence of the
* vga clients. Currently only the radeon and amdgpu drivers use this.
* The return value is ignored
* @switchto: switch outputs to given client.
* Mandatory. For muxless machines this should be a no-op. Returning 0
* denotes success, anything else failure (in which case the switch is
* aborted)
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-12 03:09:20 +08:00
* @switch_ddc: switch DDC lines to given client.
* Optional. Should return the previous DDC owner on success or a
* negative int on failure
* @power_state: cut or reinstate power of given client.
* Optional. The return value is ignored
* @get_client_id: determine if given pci device is integrated or discrete GPU.
* Mandatory
*
* Handler callbacks. The multiplexer itself. The @switchto and @get_client_id
* methods are mandatory, all others may be set to NULL.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
struct vga_switcheroo_handler {
int (*init)(void);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int (*switchto)(enum vga_switcheroo_client_id id);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-12 03:09:20 +08:00
int (*switch_ddc)(enum vga_switcheroo_client_id id);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int (*power_state)(enum vga_switcheroo_client_id id,
enum vga_switcheroo_state state);
enum vga_switcheroo_client_id (*get_client_id)(struct pci_dev *pdev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
};
/**
* struct vga_switcheroo_client_ops - client callbacks
* @set_gpu_state: do the equivalent of suspend/resume for the card.
* Mandatory. This should not cut power to the discrete GPU,
* which is the job of the handler
* @reprobe: poll outputs.
* Optional. This gets called after waking the GPU and switching
* the outputs to it
* @can_switch: check if the device is in a position to switch now.
* Mandatory. The client should return false if a user space process
* has one of its device files open
ALSA: hda - Enable runtime PM only for discrete GPU The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-10 22:20:25 +08:00
* @gpu_bound: notify the client id to audio client when the GPU is bound.
*
* Client callbacks. A client can be either a GPU or an audio device on a GPU.
* The @set_gpu_state and @can_switch methods are mandatory, @reprobe may be
* set to NULL. For audio clients, the @reprobe member is bogus.
ALSA: hda - Enable runtime PM only for discrete GPU The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-10 22:20:25 +08:00
* OTOH, @gpu_bound is only for audio clients, and not used for GPU clients.
*/
struct vga_switcheroo_client_ops {
void (*set_gpu_state)(struct pci_dev *dev, enum vga_switcheroo_state);
void (*reprobe)(struct pci_dev *dev);
bool (*can_switch)(struct pci_dev *dev);
ALSA: hda - Enable runtime PM only for discrete GPU The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-10 22:20:25 +08:00
void (*gpu_bound)(struct pci_dev *dev, enum vga_switcheroo_client_id);
};
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
#if defined(CONFIG_VGA_SWITCHEROO)
void vga_switcheroo_unregister_client(struct pci_dev *dev);
int vga_switcheroo_register_client(struct pci_dev *dev,
const struct vga_switcheroo_client_ops *ops,
bool driver_power_control);
int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
const struct vga_switcheroo_client_ops *ops,
struct pci_dev *vga_dev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
void vga_switcheroo_client_fb_set(struct pci_dev *dev,
struct fb_info *info);
int vga_switcheroo_register_handler(const struct vga_switcheroo_handler *handler,
enum vga_switcheroo_handler_flags_t handler_flags);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
void vga_switcheroo_unregister_handler(void);
enum vga_switcheroo_handler_flags_t vga_switcheroo_handler_flags(void);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-12 03:09:20 +08:00
int vga_switcheroo_lock_ddc(struct pci_dev *pdev);
int vga_switcheroo_unlock_ddc(struct pci_dev *pdev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
int vga_switcheroo_process_delayed_switch(void);
vga_switcheroo: Add helper for deferred probing So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
2016-05-31 17:13:27 +08:00
bool vga_switcheroo_client_probe_defer(struct pci_dev *pdev);
enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *dev);
int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain);
void vga_switcheroo_fini_domain_pm_ops(struct device *dev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
#else
static inline void vga_switcheroo_unregister_client(struct pci_dev *dev) {}
static inline int vga_switcheroo_register_client(struct pci_dev *dev,
const struct vga_switcheroo_client_ops *ops, bool driver_power_control) { return 0; }
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
static inline void vga_switcheroo_client_fb_set(struct pci_dev *dev, struct fb_info *info) {}
static inline int vga_switcheroo_register_handler(const struct vga_switcheroo_handler *handler,
enum vga_switcheroo_handler_flags_t handler_flags) { return 0; }
static inline int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
const struct vga_switcheroo_client_ops *ops,
struct pci_dev *vga_dev) { return 0; }
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
static inline void vga_switcheroo_unregister_handler(void) {}
static inline enum vga_switcheroo_handler_flags_t vga_switcheroo_handler_flags(void) { return 0; }
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-12 03:09:20 +08:00
static inline int vga_switcheroo_lock_ddc(struct pci_dev *pdev) { return -ENODEV; }
static inline int vga_switcheroo_unlock_ddc(struct pci_dev *pdev) { return -ENODEV; }
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
static inline int vga_switcheroo_process_delayed_switch(void) { return 0; }
vga_switcheroo: Add helper for deferred probing So far we've got one condition when DRM drivers need to defer probing on a dual GPU system and it's coded separately into each of the relevant drivers. As suggested by Daniel Vetter, deduplicate that code in the drivers and move it to a new vga_switcheroo helper. This yields better encapsulation of concepts and lets us add further checks in a central place. (The existing check pertains to pre-retina MacBook Pros and an additional check is expected to be needed for retinas.) One might be tempted to check deferred probing conditions in vga_switcheroo_register_client(), but this is usually called fairly late during driver load. The GPU is fully brought up and ready for switching at that point. On boot the ->probe hook is potentially called dozens of times until it finally succeeds, and each time we'd repeat bringup and teardown of the GPU, lengthening boot time considerably and cluttering logfiles. A separate helper is therefore needed which can be called right at the beginning of the ->probe hook. Note that amdgpu currently does not call this helper as the AMD GPUs built into MacBook Pros are only supported by radeon so far. v2: This helper could eventually be used by audio clients as well, so rephrase kerneldoc to refer to "client" instead of "GPU" and move the single existing check in an if block specific to PCI_CLASS_DISPLAY_VGA devices. Move documentation on that check from kerneldoc to a comment. (Daniel Vetter) v3: Mandate in kerneldoc that registration of client shall only happen after calling this helper. (Daniel Vetter) v4: Rebase on 412c8f7de011 ("drm/radeon: Return -EPROBE_DEFER when amdkfd not loaded") v5: Some Optimus GPUs use PCI_CLASS_DISPLAY_3D, make sure those are matched as well. (Emil Velikov) v6: The if-condition referring to PCI_BASE_CLASS_DISPLAY may be considered a functional change. Move to a separate commit to keep this a pure refactoring change. (Emil Velikov, Jani Nikula) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/575885fd440c2b13c3f19ddf44360cfbbff35f50.1464685538.git.lukas@wunner.de
2016-05-31 17:13:27 +08:00
static inline bool vga_switcheroo_client_probe_defer(struct pci_dev *pdev) { return false; }
static inline enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *dev) { return VGA_SWITCHEROO_ON; }
static inline int vga_switcheroo_init_domain_pm_ops(struct device *dev, struct dev_pm_domain *domain) { return -EINVAL; }
static inline void vga_switcheroo_fini_domain_pm_ops(struct device *dev) {}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 13:38:10 +08:00
#endif
#endif /* _LINUX_VGA_SWITCHEROO_H_ */