linux-sg2042/drivers/rtc/rtc-omap.c

1044 lines
27 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* TI OMAP Real Time Clock interface for Linux
*
* Copyright (C) 2003 MontaVista Software, Inc.
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
*
* Copyright (C) 2006 David Brownell (new RTC framework)
* Copyright (C) 2014 Johan Hovold <johan@kernel.org>
*/
#include <dt-bindings/gpio/gpio.h>
#include <linux/bcd.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/rtc.h>
/*
* The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock
* with century-range alarm matching, driven by the 32kHz clock.
*
* The main user-visible ways it differs from PC RTCs are by omitting
* "don't care" alarm fields and sub-second periodic IRQs, and having
* an autoadjust mechanism to calibrate to the true oscillator rate.
*
* Board-specific wiring options include using split power mode with
* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
* low power modes) for OMAP1 boards (OMAP-L138 has this built into
* the SoC). See the BOARD-SPECIFIC CUSTOMIZATION comment.
*/
/* RTC registers */
#define OMAP_RTC_SECONDS_REG 0x00
#define OMAP_RTC_MINUTES_REG 0x04
#define OMAP_RTC_HOURS_REG 0x08
#define OMAP_RTC_DAYS_REG 0x0C
#define OMAP_RTC_MONTHS_REG 0x10
#define OMAP_RTC_YEARS_REG 0x14
#define OMAP_RTC_WEEKS_REG 0x18
#define OMAP_RTC_ALARM_SECONDS_REG 0x20
#define OMAP_RTC_ALARM_MINUTES_REG 0x24
#define OMAP_RTC_ALARM_HOURS_REG 0x28
#define OMAP_RTC_ALARM_DAYS_REG 0x2c
#define OMAP_RTC_ALARM_MONTHS_REG 0x30
#define OMAP_RTC_ALARM_YEARS_REG 0x34
#define OMAP_RTC_CTRL_REG 0x40
#define OMAP_RTC_STATUS_REG 0x44
#define OMAP_RTC_INTERRUPTS_REG 0x48
#define OMAP_RTC_COMP_LSB_REG 0x4c
#define OMAP_RTC_COMP_MSB_REG 0x50
#define OMAP_RTC_OSC_REG 0x54
#define OMAP_RTC_SCRATCH0_REG 0x60
#define OMAP_RTC_SCRATCH1_REG 0x64
#define OMAP_RTC_SCRATCH2_REG 0x68
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
#define OMAP_RTC_KICK0_REG 0x6c
#define OMAP_RTC_KICK1_REG 0x70
#define OMAP_RTC_IRQWAKEEN 0x7c
#define OMAP_RTC_ALARM2_SECONDS_REG 0x80
#define OMAP_RTC_ALARM2_MINUTES_REG 0x84
#define OMAP_RTC_ALARM2_HOURS_REG 0x88
#define OMAP_RTC_ALARM2_DAYS_REG 0x8c
#define OMAP_RTC_ALARM2_MONTHS_REG 0x90
#define OMAP_RTC_ALARM2_YEARS_REG 0x94
#define OMAP_RTC_PMIC_REG 0x98
/* OMAP_RTC_CTRL_REG bit fields: */
#define OMAP_RTC_CTRL_SPLIT BIT(7)
#define OMAP_RTC_CTRL_DISABLE BIT(6)
#define OMAP_RTC_CTRL_SET_32_COUNTER BIT(5)
#define OMAP_RTC_CTRL_TEST BIT(4)
#define OMAP_RTC_CTRL_MODE_12_24 BIT(3)
#define OMAP_RTC_CTRL_AUTO_COMP BIT(2)
#define OMAP_RTC_CTRL_ROUND_30S BIT(1)
#define OMAP_RTC_CTRL_STOP BIT(0)
/* OMAP_RTC_STATUS_REG bit fields: */
#define OMAP_RTC_STATUS_POWER_UP BIT(7)
#define OMAP_RTC_STATUS_ALARM2 BIT(7)
#define OMAP_RTC_STATUS_ALARM BIT(6)
#define OMAP_RTC_STATUS_1D_EVENT BIT(5)
#define OMAP_RTC_STATUS_1H_EVENT BIT(4)
#define OMAP_RTC_STATUS_1M_EVENT BIT(3)
#define OMAP_RTC_STATUS_1S_EVENT BIT(2)
#define OMAP_RTC_STATUS_RUN BIT(1)
#define OMAP_RTC_STATUS_BUSY BIT(0)
/* OMAP_RTC_INTERRUPTS_REG bit fields: */
#define OMAP_RTC_INTERRUPTS_IT_ALARM2 BIT(4)
#define OMAP_RTC_INTERRUPTS_IT_ALARM BIT(3)
#define OMAP_RTC_INTERRUPTS_IT_TIMER BIT(2)
/* OMAP_RTC_OSC_REG bit fields: */
#define OMAP_RTC_OSC_32KCLK_EN BIT(6)
#define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3)
#define OMAP_RTC_OSC_OSC32K_GZ_DISABLE BIT(4)
/* OMAP_RTC_IRQWAKEEN bit fields: */
#define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1)
/* OMAP_RTC_PMIC bit fields: */
#define OMAP_RTC_PMIC_POWER_EN_EN BIT(16)
#define OMAP_RTC_PMIC_EXT_WKUP_EN(x) BIT(x)
#define OMAP_RTC_PMIC_EXT_WKUP_POL(x) BIT(4 + x)
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
/* OMAP_RTC_KICKER values */
#define KICK0_VALUE 0x83e70b13
#define KICK1_VALUE 0x95a4f1e0
struct omap_rtc;
struct omap_rtc_device_type {
bool has_32kclk_en;
bool has_irqwakeen;
bool has_pmic_mode;
bool has_power_up_reset;
void (*lock)(struct omap_rtc *rtc);
void (*unlock)(struct omap_rtc *rtc);
};
struct omap_rtc {
struct rtc_device *rtc;
void __iomem *base;
struct clk *clk;
int irq_alarm;
int irq_timer;
u8 interrupts_reg;
bool is_pmic_controller;
bool has_ext_clk;
bool is_suspending;
const struct omap_rtc_device_type *type;
struct pinctrl_dev *pctldev;
};
static inline u8 rtc_read(struct omap_rtc *rtc, unsigned int reg)
{
return readb(rtc->base + reg);
}
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
static inline u32 rtc_readl(struct omap_rtc *rtc, unsigned int reg)
{
return readl(rtc->base + reg);
}
static inline void rtc_write(struct omap_rtc *rtc, unsigned int reg, u8 val)
{
writeb(val, rtc->base + reg);
}
static inline void rtc_writel(struct omap_rtc *rtc, unsigned int reg, u32 val)
{
writel(val, rtc->base + reg);
}
static void am3352_rtc_unlock(struct omap_rtc *rtc)
{
rtc_writel(rtc, OMAP_RTC_KICK0_REG, KICK0_VALUE);
rtc_writel(rtc, OMAP_RTC_KICK1_REG, KICK1_VALUE);
}
static void am3352_rtc_lock(struct omap_rtc *rtc)
{
rtc_writel(rtc, OMAP_RTC_KICK0_REG, 0);
rtc_writel(rtc, OMAP_RTC_KICK1_REG, 0);
}
static void default_rtc_unlock(struct omap_rtc *rtc)
{
}
static void default_rtc_lock(struct omap_rtc *rtc)
{
}
/*
* We rely on the rtc framework to handle locking (rtc->ops_lock),
* so the only other requirement is that register accesses which
* require BUSY to be clear are made with IRQs locally disabled
*/
static void rtc_wait_not_busy(struct omap_rtc *rtc)
{
int count;
u8 status;
/* BUSY may stay active for 1/32768 second (~30 usec) */
for (count = 0; count < 50; count++) {
status = rtc_read(rtc, OMAP_RTC_STATUS_REG);
if (!(status & OMAP_RTC_STATUS_BUSY))
break;
udelay(1);
}
/* now we have ~15 usec to read/write various registers */
}
static irqreturn_t rtc_irq(int irq, void *dev_id)
{
struct omap_rtc *rtc = dev_id;
unsigned long events = 0;
u8 irq_data;
irq_data = rtc_read(rtc, OMAP_RTC_STATUS_REG);
/* alarm irq? */
if (irq_data & OMAP_RTC_STATUS_ALARM) {
rtc->type->unlock(rtc);
rtc_write(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM);
rtc->type->lock(rtc);
events |= RTC_IRQF | RTC_AF;
}
/* 1/sec periodic/update irq? */
if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
events |= RTC_IRQF | RTC_UF;
rtc_update_irq(rtc->rtc, 1, events);
return IRQ_HANDLED;
}
static int omap_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
u8 reg, irqwake_reg = 0;
local_irq_disable();
rtc_wait_not_busy(rtc);
reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
if (rtc->type->has_irqwakeen)
irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
if (enabled) {
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
} else {
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
}
rtc_wait_not_busy(rtc);
rtc->type->unlock(rtc);
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
if (rtc->type->has_irqwakeen)
rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
rtc->type->lock(rtc);
local_irq_enable();
return 0;
}
/* this hardware doesn't support "don't care" alarm fields */
static void tm2bcd(struct rtc_time *tm)
{
tm->tm_sec = bin2bcd(tm->tm_sec);
tm->tm_min = bin2bcd(tm->tm_min);
tm->tm_hour = bin2bcd(tm->tm_hour);
tm->tm_mday = bin2bcd(tm->tm_mday);
tm->tm_mon = bin2bcd(tm->tm_mon + 1);
tm->tm_year = bin2bcd(tm->tm_year - 100);
}
static void bcd2tm(struct rtc_time *tm)
{
tm->tm_sec = bcd2bin(tm->tm_sec);
tm->tm_min = bcd2bin(tm->tm_min);
tm->tm_hour = bcd2bin(tm->tm_hour);
tm->tm_mday = bcd2bin(tm->tm_mday);
tm->tm_mon = bcd2bin(tm->tm_mon) - 1;
/* epoch == 1900 */
tm->tm_year = bcd2bin(tm->tm_year) + 100;
}
static void omap_rtc_read_time_raw(struct omap_rtc *rtc, struct rtc_time *tm)
{
tm->tm_sec = rtc_read(rtc, OMAP_RTC_SECONDS_REG);
tm->tm_min = rtc_read(rtc, OMAP_RTC_MINUTES_REG);
tm->tm_hour = rtc_read(rtc, OMAP_RTC_HOURS_REG);
tm->tm_mday = rtc_read(rtc, OMAP_RTC_DAYS_REG);
tm->tm_mon = rtc_read(rtc, OMAP_RTC_MONTHS_REG);
tm->tm_year = rtc_read(rtc, OMAP_RTC_YEARS_REG);
}
static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
/* we don't report wday/yday/isdst ... */
local_irq_disable();
rtc_wait_not_busy(rtc);
omap_rtc_read_time_raw(rtc, tm);
local_irq_enable();
bcd2tm(tm);
return 0;
}
static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
tm2bcd(tm);
local_irq_disable();
rtc_wait_not_busy(rtc);
rtc->type->unlock(rtc);
rtc_write(rtc, OMAP_RTC_YEARS_REG, tm->tm_year);
rtc_write(rtc, OMAP_RTC_MONTHS_REG, tm->tm_mon);
rtc_write(rtc, OMAP_RTC_DAYS_REG, tm->tm_mday);
rtc_write(rtc, OMAP_RTC_HOURS_REG, tm->tm_hour);
rtc_write(rtc, OMAP_RTC_MINUTES_REG, tm->tm_min);
rtc_write(rtc, OMAP_RTC_SECONDS_REG, tm->tm_sec);
rtc->type->lock(rtc);
local_irq_enable();
return 0;
}
static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
u8 interrupts;
local_irq_disable();
rtc_wait_not_busy(rtc);
alm->time.tm_sec = rtc_read(rtc, OMAP_RTC_ALARM_SECONDS_REG);
alm->time.tm_min = rtc_read(rtc, OMAP_RTC_ALARM_MINUTES_REG);
alm->time.tm_hour = rtc_read(rtc, OMAP_RTC_ALARM_HOURS_REG);
alm->time.tm_mday = rtc_read(rtc, OMAP_RTC_ALARM_DAYS_REG);
alm->time.tm_mon = rtc_read(rtc, OMAP_RTC_ALARM_MONTHS_REG);
alm->time.tm_year = rtc_read(rtc, OMAP_RTC_ALARM_YEARS_REG);
local_irq_enable();
bcd2tm(&alm->time);
interrupts = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
alm->enabled = !!(interrupts & OMAP_RTC_INTERRUPTS_IT_ALARM);
return 0;
}
static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
u8 reg, irqwake_reg = 0;
tm2bcd(&alm->time);
local_irq_disable();
rtc_wait_not_busy(rtc);
rtc->type->unlock(rtc);
rtc_write(rtc, OMAP_RTC_ALARM_YEARS_REG, alm->time.tm_year);
rtc_write(rtc, OMAP_RTC_ALARM_MONTHS_REG, alm->time.tm_mon);
rtc_write(rtc, OMAP_RTC_ALARM_DAYS_REG, alm->time.tm_mday);
rtc_write(rtc, OMAP_RTC_ALARM_HOURS_REG, alm->time.tm_hour);
rtc_write(rtc, OMAP_RTC_ALARM_MINUTES_REG, alm->time.tm_min);
rtc_write(rtc, OMAP_RTC_ALARM_SECONDS_REG, alm->time.tm_sec);
reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
if (rtc->type->has_irqwakeen)
irqwake_reg = rtc_read(rtc, OMAP_RTC_IRQWAKEEN);
if (alm->enabled) {
reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
irqwake_reg |= OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
} else {
reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
irqwake_reg &= ~OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN;
}
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, reg);
if (rtc->type->has_irqwakeen)
rtc_write(rtc, OMAP_RTC_IRQWAKEEN, irqwake_reg);
rtc->type->lock(rtc);
local_irq_enable();
return 0;
}
static struct omap_rtc *omap_rtc_power_off_rtc;
rtc: OMAP: Add support for rtc-only mode Prepare rtc driver for rtc-only with DDR in self-refresh mode. omap_rtc_power_off now should cater to two features: 1) RTC plus DDR in self-refresh is power a saving mode where in the entire system including the different voltage rails from PMIC are shutdown except the ones feeding on to RTC and DDR. DDR is kept in self-refresh hence the contents are preserved. RTC ALARM2 is connected to PMIC_EN line once we the ALARM2 is triggered we enter the mode with DDR in self-refresh and RTC Ticking. After a predetermined time an RTC ALARM1 triggers waking up the system[1]. The control goes to bootloader. The bootloader then checks RTC scratchpad registers to confirm it was an rtc_only wakeup and follows a different path, configure bare minimal clocks for ddr and then jumps to the resume address in another RTC scratchpad registers and transfers the control to Kernel. Kernel then restores the saved context. omap_rtc_power_off_program does the ALARM2 programming part. [1] http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf Page 2884 2) Power-off: This is usual poweroff mode. omap_rtc_power_off calls the above omap_rtc_power_off_program function and in addition to that programs the OMAP_RTC_PMIC_REG for any external wake ups for PMIC like the pushbutton and shuts off the PMIC. Hence the split in omap_rtc_power_off. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [tony@atomide.com: folded in a fix for compile warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 12:57:39 +08:00
/**
* omap_rtc_power_off_program: Set the pmic power off sequence. The RTC
* generates pmic_pwr_enable control, which can be used to control an external
* PMIC.
*/
rtc: OMAP: Add support for rtc-only mode Prepare rtc driver for rtc-only with DDR in self-refresh mode. omap_rtc_power_off now should cater to two features: 1) RTC plus DDR in self-refresh is power a saving mode where in the entire system including the different voltage rails from PMIC are shutdown except the ones feeding on to RTC and DDR. DDR is kept in self-refresh hence the contents are preserved. RTC ALARM2 is connected to PMIC_EN line once we the ALARM2 is triggered we enter the mode with DDR in self-refresh and RTC Ticking. After a predetermined time an RTC ALARM1 triggers waking up the system[1]. The control goes to bootloader. The bootloader then checks RTC scratchpad registers to confirm it was an rtc_only wakeup and follows a different path, configure bare minimal clocks for ddr and then jumps to the resume address in another RTC scratchpad registers and transfers the control to Kernel. Kernel then restores the saved context. omap_rtc_power_off_program does the ALARM2 programming part. [1] http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf Page 2884 2) Power-off: This is usual poweroff mode. omap_rtc_power_off calls the above omap_rtc_power_off_program function and in addition to that programs the OMAP_RTC_PMIC_REG for any external wake ups for PMIC like the pushbutton and shuts off the PMIC. Hence the split in omap_rtc_power_off. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [tony@atomide.com: folded in a fix for compile warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 12:57:39 +08:00
int omap_rtc_power_off_program(struct device *dev)
{
struct omap_rtc *rtc = omap_rtc_power_off_rtc;
struct rtc_time tm;
unsigned long now;
int seconds;
u32 val;
rtc->type->unlock(rtc);
/* enable pmic_power_en control */
val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
rtc_writel(rtc, OMAP_RTC_PMIC_REG, val | OMAP_RTC_PMIC_POWER_EN_EN);
again:
rtc: OMAP: Add support for rtc-only mode Prepare rtc driver for rtc-only with DDR in self-refresh mode. omap_rtc_power_off now should cater to two features: 1) RTC plus DDR in self-refresh is power a saving mode where in the entire system including the different voltage rails from PMIC are shutdown except the ones feeding on to RTC and DDR. DDR is kept in self-refresh hence the contents are preserved. RTC ALARM2 is connected to PMIC_EN line once we the ALARM2 is triggered we enter the mode with DDR in self-refresh and RTC Ticking. After a predetermined time an RTC ALARM1 triggers waking up the system[1]. The control goes to bootloader. The bootloader then checks RTC scratchpad registers to confirm it was an rtc_only wakeup and follows a different path, configure bare minimal clocks for ddr and then jumps to the resume address in another RTC scratchpad registers and transfers the control to Kernel. Kernel then restores the saved context. omap_rtc_power_off_program does the ALARM2 programming part. [1] http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf Page 2884 2) Power-off: This is usual poweroff mode. omap_rtc_power_off calls the above omap_rtc_power_off_program function and in addition to that programs the OMAP_RTC_PMIC_REG for any external wake ups for PMIC like the pushbutton and shuts off the PMIC. Hence the split in omap_rtc_power_off. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [tony@atomide.com: folded in a fix for compile warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 12:57:39 +08:00
/* Clear any existing ALARM2 event */
rtc_writel(rtc, OMAP_RTC_STATUS_REG, OMAP_RTC_STATUS_ALARM2);
/* set alarm one second from now */
omap_rtc_read_time_raw(rtc, &tm);
seconds = tm.tm_sec;
bcd2tm(&tm);
now = rtc_tm_to_time64(&tm);
rtc_time64_to_tm(now + 1, &tm);
tm2bcd(&tm);
rtc_wait_not_busy(rtc);
rtc_write(rtc, OMAP_RTC_ALARM2_SECONDS_REG, tm.tm_sec);
rtc_write(rtc, OMAP_RTC_ALARM2_MINUTES_REG, tm.tm_min);
rtc_write(rtc, OMAP_RTC_ALARM2_HOURS_REG, tm.tm_hour);
rtc_write(rtc, OMAP_RTC_ALARM2_DAYS_REG, tm.tm_mday);
rtc_write(rtc, OMAP_RTC_ALARM2_MONTHS_REG, tm.tm_mon);
rtc_write(rtc, OMAP_RTC_ALARM2_YEARS_REG, tm.tm_year);
/*
* enable ALARM2 interrupt
*
* NOTE: this fails on AM3352 if rtc_write (writeb) is used
*/
val = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG,
val | OMAP_RTC_INTERRUPTS_IT_ALARM2);
/* Retry in case roll over happened before alarm was armed. */
if (rtc_read(rtc, OMAP_RTC_SECONDS_REG) != seconds) {
val = rtc_read(rtc, OMAP_RTC_STATUS_REG);
if (!(val & OMAP_RTC_STATUS_ALARM2))
goto again;
}
rtc->type->lock(rtc);
rtc: OMAP: Add support for rtc-only mode Prepare rtc driver for rtc-only with DDR in self-refresh mode. omap_rtc_power_off now should cater to two features: 1) RTC plus DDR in self-refresh is power a saving mode where in the entire system including the different voltage rails from PMIC are shutdown except the ones feeding on to RTC and DDR. DDR is kept in self-refresh hence the contents are preserved. RTC ALARM2 is connected to PMIC_EN line once we the ALARM2 is triggered we enter the mode with DDR in self-refresh and RTC Ticking. After a predetermined time an RTC ALARM1 triggers waking up the system[1]. The control goes to bootloader. The bootloader then checks RTC scratchpad registers to confirm it was an rtc_only wakeup and follows a different path, configure bare minimal clocks for ddr and then jumps to the resume address in another RTC scratchpad registers and transfers the control to Kernel. Kernel then restores the saved context. omap_rtc_power_off_program does the ALARM2 programming part. [1] http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf Page 2884 2) Power-off: This is usual poweroff mode. omap_rtc_power_off calls the above omap_rtc_power_off_program function and in addition to that programs the OMAP_RTC_PMIC_REG for any external wake ups for PMIC like the pushbutton and shuts off the PMIC. Hence the split in omap_rtc_power_off. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [tony@atomide.com: folded in a fix for compile warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-04-03 12:57:39 +08:00
return 0;
}
EXPORT_SYMBOL(omap_rtc_power_off_program);
/*
* omap_rtc_poweroff: RTC-controlled power off
*
* The RTC can be used to control an external PMIC via the pmic_power_en pin,
* which can be configured to transition to OFF on ALARM2 events.
*
* Notes:
* The one-second alarm offset is the shortest offset possible as the alarm
* registers must be set before the next timer update and the offset
* calculation is too heavy for everything to be done within a single access
* period (~15 us).
*
* Called with local interrupts disabled.
*/
static void omap_rtc_power_off(void)
{
struct rtc_device *rtc = omap_rtc_power_off_rtc->rtc;
u32 val;
omap_rtc_power_off_program(rtc->dev.parent);
/* Set PMIC power enable and EXT_WAKEUP in case PB power on is used */
omap_rtc_power_off_rtc->type->unlock(omap_rtc_power_off_rtc);
val = rtc_readl(omap_rtc_power_off_rtc, OMAP_RTC_PMIC_REG);
val |= OMAP_RTC_PMIC_POWER_EN_EN | OMAP_RTC_PMIC_EXT_WKUP_POL(0) |
OMAP_RTC_PMIC_EXT_WKUP_EN(0);
rtc_writel(omap_rtc_power_off_rtc, OMAP_RTC_PMIC_REG, val);
omap_rtc_power_off_rtc->type->lock(omap_rtc_power_off_rtc);
/*
* Wait for alarm to trigger (within one second) and external PMIC to
* power off the system. Add a 500 ms margin for external latencies
* (e.g. debounce circuits).
*/
mdelay(1500);
}
static const struct rtc_class_ops omap_rtc_ops = {
.read_time = omap_rtc_read_time,
.set_time = omap_rtc_set_time,
.read_alarm = omap_rtc_read_alarm,
.set_alarm = omap_rtc_set_alarm,
.alarm_irq_enable = omap_rtc_alarm_irq_enable,
};
static const struct omap_rtc_device_type omap_rtc_default_type = {
.has_power_up_reset = true,
.lock = default_rtc_lock,
.unlock = default_rtc_unlock,
};
static const struct omap_rtc_device_type omap_rtc_am3352_type = {
.has_32kclk_en = true,
.has_irqwakeen = true,
.has_pmic_mode = true,
.lock = am3352_rtc_lock,
.unlock = am3352_rtc_unlock,
};
static const struct omap_rtc_device_type omap_rtc_da830_type = {
.lock = am3352_rtc_lock,
.unlock = am3352_rtc_unlock,
};
static const struct platform_device_id omap_rtc_id_table[] = {
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
{
.name = "omap_rtc",
.driver_data = (kernel_ulong_t)&omap_rtc_default_type,
}, {
.name = "am3352-rtc",
.driver_data = (kernel_ulong_t)&omap_rtc_am3352_type,
}, {
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
.name = "da830-rtc",
.driver_data = (kernel_ulong_t)&omap_rtc_da830_type,
}, {
/* sentinel */
}
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
};
MODULE_DEVICE_TABLE(platform, omap_rtc_id_table);
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
static const struct of_device_id omap_rtc_of_match[] = {
{
.compatible = "ti,am3352-rtc",
.data = &omap_rtc_am3352_type,
}, {
.compatible = "ti,da830-rtc",
.data = &omap_rtc_da830_type,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(of, omap_rtc_of_match);
static const struct pinctrl_pin_desc rtc_pins_desc[] = {
PINCTRL_PIN(0, "ext_wakeup0"),
PINCTRL_PIN(1, "ext_wakeup1"),
PINCTRL_PIN(2, "ext_wakeup2"),
PINCTRL_PIN(3, "ext_wakeup3"),
};
static int rtc_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
{
return 0;
}
static const char *rtc_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
return NULL;
}
static const struct pinctrl_ops rtc_pinctrl_ops = {
.get_groups_count = rtc_pinctrl_get_groups_count,
.get_group_name = rtc_pinctrl_get_group_name,
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
.dt_free_map = pinconf_generic_dt_free_map,
};
#define PIN_CONFIG_ACTIVE_HIGH (PIN_CONFIG_END + 1)
static const struct pinconf_generic_params rtc_params[] = {
{"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
};
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item rtc_conf_items[ARRAY_SIZE(rtc_params)] = {
PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
};
#endif
static int rtc_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
{
struct omap_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
unsigned int param = pinconf_to_config_param(*config);
u32 val;
u16 arg = 0;
val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
switch (param) {
case PIN_CONFIG_INPUT_ENABLE:
if (!(val & OMAP_RTC_PMIC_EXT_WKUP_EN(pin)))
return -EINVAL;
break;
case PIN_CONFIG_ACTIVE_HIGH:
if (val & OMAP_RTC_PMIC_EXT_WKUP_POL(pin))
return -EINVAL;
break;
default:
return -ENOTSUPP;
};
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static int rtc_pinconf_set(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *configs,
unsigned int num_configs)
{
struct omap_rtc *rtc = pinctrl_dev_get_drvdata(pctldev);
u32 val;
unsigned int param;
u32 param_val;
int i;
val = rtc_readl(rtc, OMAP_RTC_PMIC_REG);
/* active low by default */
val |= OMAP_RTC_PMIC_EXT_WKUP_POL(pin);
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
param_val = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_INPUT_ENABLE:
if (param_val)
val |= OMAP_RTC_PMIC_EXT_WKUP_EN(pin);
else
val &= ~OMAP_RTC_PMIC_EXT_WKUP_EN(pin);
break;
case PIN_CONFIG_ACTIVE_HIGH:
val &= ~OMAP_RTC_PMIC_EXT_WKUP_POL(pin);
break;
default:
dev_err(&rtc->rtc->dev, "Property %u not supported\n",
param);
return -ENOTSUPP;
}
}
rtc->type->unlock(rtc);
rtc_writel(rtc, OMAP_RTC_PMIC_REG, val);
rtc->type->lock(rtc);
return 0;
}
static const struct pinconf_ops rtc_pinconf_ops = {
.is_generic = true,
.pin_config_get = rtc_pinconf_get,
.pin_config_set = rtc_pinconf_set,
};
static struct pinctrl_desc rtc_pinctrl_desc = {
.pins = rtc_pins_desc,
.npins = ARRAY_SIZE(rtc_pins_desc),
.pctlops = &rtc_pinctrl_ops,
.confops = &rtc_pinconf_ops,
.custom_params = rtc_params,
.num_custom_params = ARRAY_SIZE(rtc_params),
#ifdef CONFIG_DEBUG_FS
.custom_conf_items = rtc_conf_items,
#endif
.owner = THIS_MODULE,
};
static int omap_rtc_scratch_read(void *priv, unsigned int offset, void *_val,
size_t bytes)
{
struct omap_rtc *rtc = priv;
u32 *val = _val;
int i;
for (i = 0; i < bytes / 4; i++)
val[i] = rtc_readl(rtc,
OMAP_RTC_SCRATCH0_REG + offset + (i * 4));
return 0;
}
static int omap_rtc_scratch_write(void *priv, unsigned int offset, void *_val,
size_t bytes)
{
struct omap_rtc *rtc = priv;
u32 *val = _val;
int i;
rtc->type->unlock(rtc);
for (i = 0; i < bytes / 4; i++)
rtc_writel(rtc,
OMAP_RTC_SCRATCH0_REG + offset + (i * 4), val[i]);
rtc->type->lock(rtc);
return 0;
}
static struct nvmem_config omap_rtc_nvmem_config = {
.name = "omap_rtc_scratch",
.word_size = 4,
.stride = 4,
.size = OMAP_RTC_KICK0_REG - OMAP_RTC_SCRATCH0_REG,
.reg_read = omap_rtc_scratch_read,
.reg_write = omap_rtc_scratch_write,
};
static int omap_rtc_probe(struct platform_device *pdev)
{
struct omap_rtc *rtc;
struct resource *res;
u8 reg, mask, new_ctrl;
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
const struct platform_device_id *id_entry;
const struct of_device_id *of_id;
int ret;
rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
of_id = of_match_device(omap_rtc_of_match, &pdev->dev);
if (of_id) {
rtc->type = of_id->data;
rtc->is_pmic_controller = rtc->type->has_pmic_mode &&
of_device_is_system_power_controller(pdev->dev.of_node);
} else {
id_entry = platform_get_device_id(pdev);
rtc->type = (void *)id_entry->driver_data;
}
rtc->irq_timer = platform_get_irq(pdev, 0);
if (rtc->irq_timer <= 0)
return -ENOENT;
rtc->irq_alarm = platform_get_irq(pdev, 1);
if (rtc->irq_alarm <= 0)
return -ENOENT;
rtc->clk = devm_clk_get(&pdev->dev, "ext-clk");
if (!IS_ERR(rtc->clk))
rtc->has_ext_clk = true;
else
rtc->clk = devm_clk_get(&pdev->dev, "int-clk");
if (!IS_ERR(rtc->clk))
clk_prepare_enable(rtc->clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
rtc->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rtc->base)) {
clk_disable_unprepare(rtc->clk);
return PTR_ERR(rtc->base);
}
platform_set_drvdata(pdev, rtc);
/* Enable the clock/module so that we can access the registers */
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
rtc->type->unlock(rtc);
rtc: omap: kicker mechanism support OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 08:02:11 +08:00
/*
* disable interrupts
*
* NOTE: ALARM2 is not cleared on AM3352 if rtc_write (writeb) is used
*/
rtc_writel(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
/* enable RTC functional clock */
if (rtc->type->has_32kclk_en) {
reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
rtc_writel(rtc, OMAP_RTC_OSC_REG,
reg | OMAP_RTC_OSC_32KCLK_EN);
}
/* clear old status */
reg = rtc_read(rtc, OMAP_RTC_STATUS_REG);
mask = OMAP_RTC_STATUS_ALARM;
if (rtc->type->has_pmic_mode)
mask |= OMAP_RTC_STATUS_ALARM2;
if (rtc->type->has_power_up_reset) {
mask |= OMAP_RTC_STATUS_POWER_UP;
if (reg & OMAP_RTC_STATUS_POWER_UP)
dev_info(&pdev->dev, "RTC power up reset detected\n");
}
if (reg & mask)
rtc_write(rtc, OMAP_RTC_STATUS_REG, reg & mask);
/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
reg = rtc_read(rtc, OMAP_RTC_CTRL_REG);
if (reg & OMAP_RTC_CTRL_STOP)
dev_info(&pdev->dev, "already running\n");
/* force to 24 hour mode */
new_ctrl = reg & (OMAP_RTC_CTRL_SPLIT | OMAP_RTC_CTRL_AUTO_COMP);
new_ctrl |= OMAP_RTC_CTRL_STOP;
/*
* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
*
* - Device wake-up capability setting should come through chip
* init logic. OMAP1 boards should initialize the "wakeup capable"
* flag in the platform device if the board is wired right for
* being woken up by RTC alarm. For OMAP-L138, this capability
* is built into the SoC by the "Deep Sleep" capability.
*
* - Boards wired so RTC_ON_nOFF is used as the reset signal,
* rather than nPWRON_RESET, should forcibly enable split
* power mode. (Some chip errata report that RTC_CTRL_SPLIT
* is write-only, and always reads as zero...)
*/
if (new_ctrl & OMAP_RTC_CTRL_SPLIT)
dev_info(&pdev->dev, "split power mode\n");
if (reg != new_ctrl)
rtc_write(rtc, OMAP_RTC_CTRL_REG, new_ctrl);
/*
* If we have the external clock then switch to it so we can keep
* ticking across suspend.
*/
if (rtc->has_ext_clk) {
reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
reg &= ~OMAP_RTC_OSC_OSC32K_GZ_DISABLE;
reg |= OMAP_RTC_OSC_32KCLK_EN | OMAP_RTC_OSC_SEL_32KCLK_SRC;
rtc_writel(rtc, OMAP_RTC_OSC_REG, reg);
}
rtc->type->lock(rtc);
device_init_wakeup(&pdev->dev, true);
rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtc->rtc)) {
ret = PTR_ERR(rtc->rtc);
goto err;
}
rtc->rtc->ops = &omap_rtc_ops;
rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
omap_rtc_nvmem_config.priv = rtc;
/* handle periodic and alarm irqs */
ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0,
dev_name(&rtc->rtc->dev), rtc);
if (ret)
goto err;
if (rtc->irq_timer != rtc->irq_alarm) {
ret = devm_request_irq(&pdev->dev, rtc->irq_alarm, rtc_irq, 0,
dev_name(&rtc->rtc->dev), rtc);
if (ret)
goto err;
}
/* Support ext_wakeup pinconf */
rtc_pinctrl_desc.name = dev_name(&pdev->dev);
rtc->pctldev = pinctrl_register(&rtc_pinctrl_desc, &pdev->dev, rtc);
if (IS_ERR(rtc->pctldev)) {
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
ret = PTR_ERR(rtc->pctldev);
goto err;
}
ret = rtc_register_device(rtc->rtc);
if (ret)
goto err_deregister_pinctrl;
rtc_nvmem_register(rtc->rtc, &omap_rtc_nvmem_config);
if (rtc->is_pmic_controller) {
if (!pm_power_off) {
omap_rtc_power_off_rtc = rtc;
pm_power_off = omap_rtc_power_off;
}
}
return 0;
err_deregister_pinctrl:
pinctrl_unregister(rtc->pctldev);
err:
clk_disable_unprepare(rtc->clk);
device_init_wakeup(&pdev->dev, false);
rtc->type->lock(rtc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return ret;
}
static int omap_rtc_remove(struct platform_device *pdev)
{
struct omap_rtc *rtc = platform_get_drvdata(pdev);
u8 reg;
if (pm_power_off == omap_rtc_power_off &&
omap_rtc_power_off_rtc == rtc) {
pm_power_off = NULL;
omap_rtc_power_off_rtc = NULL;
}
device_init_wakeup(&pdev->dev, 0);
if (!IS_ERR(rtc->clk))
clk_disable_unprepare(rtc->clk);
rtc->type->unlock(rtc);
/* leave rtc running, but disable irqs */
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
if (rtc->has_ext_clk) {
reg = rtc_read(rtc, OMAP_RTC_OSC_REG);
reg &= ~OMAP_RTC_OSC_SEL_32KCLK_SRC;
rtc_write(rtc, OMAP_RTC_OSC_REG, reg);
}
rtc->type->lock(rtc);
/* Disable the clock/module */
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
/* Remove ext_wakeup pinconf */
pinctrl_unregister(rtc->pctldev);
return 0;
}
static int __maybe_unused omap_rtc_suspend(struct device *dev)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
rtc->interrupts_reg = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
rtc->type->unlock(rtc);
/*
* FIXME: the RTC alarm is not currently acting as a wakeup event
* source on some platforms, and in fact this enable() call is just
* saving a flag that's never used...
*/
if (device_may_wakeup(dev))
enable_irq_wake(rtc->irq_alarm);
else
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0);
rtc->type->lock(rtc);
rtc->is_suspending = true;
return 0;
}
static int __maybe_unused omap_rtc_resume(struct device *dev)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
rtc->type->unlock(rtc);
if (device_may_wakeup(dev))
disable_irq_wake(rtc->irq_alarm);
else
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg);
rtc->type->lock(rtc);
rtc->is_suspending = false;
return 0;
}
static int __maybe_unused omap_rtc_runtime_suspend(struct device *dev)
{
struct omap_rtc *rtc = dev_get_drvdata(dev);
if (rtc->is_suspending && !rtc->has_ext_clk)
return -EBUSY;
return 0;
}
static const struct dev_pm_ops omap_rtc_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(omap_rtc_suspend, omap_rtc_resume)
SET_RUNTIME_PM_OPS(omap_rtc_runtime_suspend, NULL, NULL)
};
static void omap_rtc_shutdown(struct platform_device *pdev)
{
struct omap_rtc *rtc = platform_get_drvdata(pdev);
u8 mask;
/*
* Keep the ALARM interrupt enabled to allow the system to power up on
* alarm events.
*/
rtc->type->unlock(rtc);
mask = rtc_read(rtc, OMAP_RTC_INTERRUPTS_REG);
mask &= OMAP_RTC_INTERRUPTS_IT_ALARM;
rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, mask);
rtc->type->lock(rtc);
}
static struct platform_driver omap_rtc_driver = {
.probe = omap_rtc_probe,
.remove = omap_rtc_remove,
.shutdown = omap_rtc_shutdown,
.driver = {
.name = "omap_rtc",
.pm = &omap_rtc_pm_ops,
.of_match_table = omap_rtc_of_match,
},
.id_table = omap_rtc_id_table,
};
module_platform_driver(omap_rtc_driver);
MODULE_ALIAS("platform:omap_rtc");
MODULE_AUTHOR("George G. Davis (and others)");
MODULE_LICENSE("GPL");