hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/gpu/drm/i915/intel_drv.h

302 lines
10 KiB
C
Raw Normal View History

DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef __INTEL_DRV_H__
#define __INTEL_DRV_H__
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
drm/i915: framebuffer compression for pre-GM45 This patch adds framebuffer compression (good for about ~0.5W power savings in the best case) support for pre-GM45 chips. GM45+ have a new, more flexible FBC scheme that will be added in a separate patch. FBC can't always be enabled: the compressed buffer must be physically contiguous and reside in stolen space. So if you have a large display and a small amount of stolen memory, you may not be able to take advantage of FBC. In some cases, a BIOS setting controls how much stolen space is available. Increasing this to 8 or 16M can help. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-11 06:28:06 +08:00
#include "i915_drv.h"
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
drm/i915: Ensure that while(INREG()) are bounded (v2) Add a new macro, wait_for, to simplify the act of waiting on a register to change state. wait_for() takes three arguments, the condition to inspect on every loop, the maximum amount of time to wait and whether to yield the cpu for a length of time after each check. v2: Upgrade failure messages to DRM_ERROR on the suggestion of Eric Anholt. We do not expect to hit these conditions as they reflect programming errors, so if we do we want to be notified. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-07 18:01:35 +08:00
drm/i915: Drop the msleep parameter to wait_for() Jesse's feedback from using the wait_for() macro was that the msleep argument was that it was superfluous and made the macro more difficult to use and to read. As the actually amount of time to sleep is not critical, the crucial part is to sleep and let the processor schedule something else whilst we wait for the event, replace the argument with a hardcoded value. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24 00:43:35 +08:00
#define _wait_for(COND, MS, W) ({ \
drm/i915: Ensure that while(INREG()) are bounded (v2) Add a new macro, wait_for, to simplify the act of waiting on a register to change state. wait_for() takes three arguments, the condition to inspect on every loop, the maximum amount of time to wait and whether to yield the cpu for a length of time after each check. v2: Upgrade failure messages to DRM_ERROR on the suggestion of Eric Anholt. We do not expect to hit these conditions as they reflect programming errors, so if we do we want to be notified. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-07 18:01:35 +08:00
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
int ret__ = 0; \
while (! (COND)) { \
if (time_after(jiffies, timeout__)) { \
ret__ = -ETIMEDOUT; \
break; \
} \
drm/i915: Avoid using msleep under kdb and wait_for() wait_for() uses msleep() to yield the cpu whilst spinning waiting for a register to change. kdb asserts that mode changes are atomic and so prohibits msleep. The alternative would be to use mdelay or to simply probe the register more often instead of busy waiting. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-07 19:16:25 +08:00
if (W && !in_dbg_master()) msleep(W); \
drm/i915: Ensure that while(INREG()) are bounded (v2) Add a new macro, wait_for, to simplify the act of waiting on a register to change state. wait_for() takes three arguments, the condition to inspect on every loop, the maximum amount of time to wait and whether to yield the cpu for a length of time after each check. v2: Upgrade failure messages to DRM_ERROR on the suggestion of Eric Anholt. We do not expect to hit these conditions as they reflect programming errors, so if we do we want to be notified. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-07 18:01:35 +08:00
} \
ret__; \
})
drm/i915: Drop the msleep parameter to wait_for() Jesse's feedback from using the wait_for() macro was that the msleep argument was that it was superfluous and made the macro more difficult to use and to read. As the actually amount of time to sleep is not critical, the crucial part is to sleep and let the processor schedule something else whilst we wait for the event, replace the argument with a hardcoded value. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24 00:43:35 +08:00
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
/*
* Display related stuff
*/
/* store information about an Ixxx DVO */
/* The i830->i865 use multiple DVOs with multiple i2cs */
/* the i915, i945 have a single sDVO i2c bus - which is different */
#define MAX_OUTPUTS 6
/* maximum connectors per crtcs in the mode set */
#define INTELFB_CONN_LIMIT 4
#define INTEL_I2C_BUS_DVO 1
#define INTEL_I2C_BUS_SDVO 2
/* these are outputs from the chip - integrated only
external chips are via DVO or SDVO output */
#define INTEL_OUTPUT_UNUSED 0
#define INTEL_OUTPUT_ANALOG 1
#define INTEL_OUTPUT_DVO 2
#define INTEL_OUTPUT_SDVO 3
#define INTEL_OUTPUT_LVDS 4
#define INTEL_OUTPUT_TVOUT 5
drm/i915: Add support for integrated HDMI on G4X hardware. This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-03 05:33:00 +08:00
#define INTEL_OUTPUT_HDMI 6
drm/i915: Add Display Port support Signed-off-by: Keith Packard <keithp@keithp.com>
2009-04-08 07:16:42 +08:00
#define INTEL_OUTPUT_DISPLAYPORT 7
drm/i915: Add eDP support on IGDNG mobile chip This adds embedded DisplayPort support on next mobile chip which aims to replace origin LVDS port. VBT's driver feature block has been used to determine the type of current internal panel for eDP or LVDS. Currently no panel fitting support for eDP and backlight control would be added in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-24 01:00:32 +08:00
#define INTEL_OUTPUT_EDP 8
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
drm/i915: Set crtc/clone mask in different output devices Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 13:50:24 +08:00
/* Intel Pipe Clone Bit */
#define INTEL_HDMIB_CLONE_BIT 1
#define INTEL_HDMIC_CLONE_BIT 2
#define INTEL_HDMID_CLONE_BIT 3
#define INTEL_HDMIE_CLONE_BIT 4
#define INTEL_HDMIF_CLONE_BIT 5
#define INTEL_SDVO_NON_TV_CLONE_BIT 6
#define INTEL_SDVO_TV_CLONE_BIT 7
#define INTEL_SDVO_LVDS_CLONE_BIT 8
#define INTEL_ANALOG_CLONE_BIT 9
#define INTEL_TV_CLONE_BIT 10
#define INTEL_DP_B_CLONE_BIT 11
#define INTEL_DP_C_CLONE_BIT 12
#define INTEL_DP_D_CLONE_BIT 13
#define INTEL_LVDS_CLONE_BIT 14
#define INTEL_DVO_TMDS_CLONE_BIT 15
#define INTEL_DVO_LVDS_CLONE_BIT 16
drm/i915: fix mask bits setting eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139 Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-08 14:52:25 +08:00
#define INTEL_EDP_CLONE_BIT 17
drm/i915: Set crtc/clone mask in different output devices Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 13:50:24 +08:00
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
#define INTEL_DVO_CHIP_TVOUT 4
drm/i915/sdvo: Preserve pixel-multiplier Store the pixel-multiplier on the adjusted mode and avoid modifying the requested mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-08-25 17:05:17 +08:00
/* drm_display_mode->private_flags */
#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
static inline void
intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
int multiplier)
{
mode->clock *= multiplier;
mode->private_flags |= multiplier;
}
static inline int
intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
{
return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
}
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
struct intel_i2c_chan {
struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */
u32 reg; /* GPIO reg */
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
};
struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_gem_object *obj;
};
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
struct intel_encoder {
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
struct drm_encoder enc;
int type;
drm/i915: Change I2C api to pass around i2c_adapters The existing API passed around intel_i2c_chan pointers, which are dependent on the i2c bit-banging algo. This precluded the driver from using outputs which use a different algo. Switching to the more general i2c_adpater allows the driver to support non bit-banging DDC. This also required moving the slave address into the output private structures. Signed-off-by: Keith Packard <keithp@keithp.com>
2009-05-31 03:16:25 +08:00
struct i2c_adapter *i2c_bus;
struct i2c_adapter *ddc_bus;
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
bool load_detect_temp;
drm/i915: sync SDVO code with stable userland modesetting driver Pull in an update from the 2D driver (hopefully the last one, future work should be done here and pulled back into xf86-video-intel as needed). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-03 07:11:52 +08:00
bool needs_tv_clock;
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
void (*hot_plug)(struct intel_encoder *);
drm/i915: Set crtc/clone mask in different output devices Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24 13:50:24 +08:00
int crtc_mask;
int clone_mask;
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
};
drm/i915: Add new 'intel_connector' structure This adds new structure of intel_connector to present drm's connector object, which is used to convert from origin single output into encoder/connector model. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:28 +08:00
struct intel_connector {
struct drm_connector base;
};
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
struct intel_crtc;
struct intel_overlay {
struct drm_device *dev;
struct intel_crtc *crtc;
struct drm_i915_gem_object *vid_bo;
struct drm_i915_gem_object *old_vid_bo;
int active;
int pfit_active;
u32 pfit_vscale_ratio; /* shifted-point number, (1<<12) == 1.0 */
u32 color_key;
u32 brightness, contrast, saturation;
u32 old_xscale, old_yscale;
/* register access */
u32 flip_addr;
struct drm_i915_gem_object *reg_bo;
void *virt_addr;
drm/i915: implement fastpath for overlay flip waiting As long as the gpu can keep up, neither the cpu (waiting for gpu) nore the gpu (waiting for vblank to do an overlay flip) stalls. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:36 +08:00
/* flip handling */
uint32_t last_flip_req;
drm/i915: implement interruptible sleeps in the overlay code At least for the common case of userspace ioctls. When doing a modeset operation, the wait is still uninterruptible. But considering that failing to turn off the overlay when switching off the crtc it's running on hangs the chip, it doesn't complicate matters _very_ much. There's just an unkillable X in addition to a black screen. BUG() about it and explain in the code. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:37 +08:00
int hw_wedged;
#define HW_WEDGED 1
#define NEEDS_WAIT_FOR_FLIP 2
#define RELEASE_OLD_VID 3
#define SWITCH_OFF_STAGE_1 4
#define SWITCH_OFF_STAGE_2 5
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
};
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
struct intel_crtc {
struct drm_crtc base;
drm/i915: framebuffer compression for pre-GM45 This patch adds framebuffer compression (good for about ~0.5W power savings in the best case) support for pre-GM45 chips. GM45+ have a new, more flexible FBC scheme that will be added in a separate patch. FBC can't always be enabled: the compressed buffer must be physically contiguous and reside in stolen space. So if you have a large display and a small amount of stolen memory, you may not be able to take advantage of FBC. In some cases, a BIOS setting controls how much stolen space is available. Increasing this to 8 or 16M can help. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-11 06:28:06 +08:00
enum pipe pipe;
enum plane plane;
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
u8 lut_r[256], lut_g[256], lut_b[256];
int dpms_mode;
drm/i915: add dynamic clock frequency control There are several sources of unnecessary power consumption on Intel graphics systems. The first is the LVDS clock. TFTs don't suffer from persistence issues like CRTs, and so we can reduce the LVDS refresh rate when the screen is idle. It will be automatically upclocked when userspace triggers graphical activity. Beyond that, we can enable memory self refresh. This allows the memory to go into a lower power state when the graphics are idle. Finally, we can drop some clocks on the gpu itself. All of these things can be reenabled between frames when GPU activity is triggered, and so there should be no user visible graphical changes. Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-18 04:31:43 +08:00
bool busy; /* is scanout buffer being updated frequently? */
struct timer_list idle_timer;
bool lowfreq_avail;
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
struct intel_overlay *overlay;
drm/i915: Add intel implementation of the pageflip ioctl Acked-by: Jakob Bornecrantz <jakob@vmware.com> Acked-by: Thomas Hellström <thomas@shipmail.org> Review-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse "Orange Smoothie" Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-19 00:25:18 +08:00
struct intel_unpin_work *unpin_work;
drm/i915/pch: Use minimal number of FDI lanes (v2) This should be a small power savings. Tested on Lenovo T410 (Ironlake), LVDS VGA and DisplayPort, up to 1920x1200R. v2: Add Sandybridge support, fix obvious math error. Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-04-12 23:38:44 +08:00
int fdi_lanes;
drm/i915: Unset cursor if out-of-bounds upon mode change (v4) The docs warn that to position the cursor such that no part of it is visible on the pipe is an undefined operation. Avoid such circumstances upon changing the mode, or at any other time, by unsetting the cursor if it moves out of bounds. "For normal high resolution display modes, the cursor must have at least a single pixel positioned over the active screen.” (p143, p148 of the hardware registers docs). Fixes: Bug 24748 - [965G] Graphics crashes when resolution is changed with KMS enabled https://bugs.freedesktop.org/show_bug.cgi?id=24748 v2: Only update the cursor registers if they change. v3: Fix the unsigned comparision of x,y against width,height. v4: Always set CUR.BASE or else the cursor may become corrupt. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reported-by: Christian Eggers <ceggers@gmx.de> Cc: Christopher James Halse Rogers <chalserogers@gmail.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-09 15:45:04 +08:00
struct drm_gem_object *cursor_bo;
uint32_t cursor_addr;
int16_t cursor_x, cursor_y;
int16_t cursor_width, cursor_height;
drm/i915: Only update i845/i865 CURBASE when disabled (v2) The i845 and i865 have a peculiarlity in that CURBASE is not the trigger for the vsync update of the cursor registers but instead the modification of that register is prohibited whilst the cursor is enabled. Reorder the write sequence for CURPOS, CURCNTR and CURBASE on i845 to i865 to match. v2: Remove the checks for i845/i865 from within i9xx_cursor_update() Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-07 18:01:38 +08:00
bool cursor_visible, cursor_on;
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
drm/i915: Add new 'intel_connector' structure This adds new structure of intel_connector to present drm's connector object, which is used to convert from origin single output into encoder/connector model. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:28 +08:00
#define to_intel_connector(x) container_of(x, struct intel_connector, base)
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
#define enc_to_intel_encoder(x) container_of(x, struct intel_encoder, enc)
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
drm/i915: Avoid pageflipping freeze when we miss the flip prepare interrupt When we miss the flip prepare interrupt, we never get into the software state needed to restart userspace, resulting in a freeze of a full-screen OpenGL application (such as a compositor). Work around this by checking DSPxSURF/DSPxBASE to see if the page flip has actually happened. If it has, do the work we would have done when the flip prepare interrupt comes in. Also, add debugfs information to tell us what's going on (based on the patch from Chris Wilson attached to bugs.fdo bug #29798). Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-02 00:47:52 +08:00
struct intel_unpin_work {
struct work_struct work;
struct drm_device *dev;
struct drm_gem_object *old_fb_obj;
struct drm_gem_object *pending_flip_obj;
struct drm_pending_vblank_event *event;
int pending;
bool enable_stall_check;
};
drm/i915: Change I2C api to pass around i2c_adapters The existing API passed around intel_i2c_chan pointers, which are dependent on the i2c bit-banging algo. This precluded the driver from using outputs which use a different algo. Switching to the more general i2c_adpater allows the driver to support non bit-banging DDC. This also required moving the slave address into the output private structures. Signed-off-by: Keith Packard <keithp@keithp.com>
2009-05-31 03:16:25 +08:00
struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
const char *name);
void intel_i2c_destroy(struct i2c_adapter *adapter);
drm/i915: change intel_ddc_get_modes() function parameters This one replaces original param for intel_ddc_get_modes() with DRM connector and i2c bus adapter instead. With explicit params, we won't require that a single driver structure must hold connector and DDC bus reference, which ease the conversion to splitted encoder/ connector model. It also clears up for some cases that we would steal other DDC bus for mode probe, like VGA analog DDC probe for DVI-I. Also it fixed a bug in old DVI-I probe handling, that failed to restore origin analog GPIO port. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:31 +08:00
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
extern bool intel_ddc_probe(struct intel_encoder *intel_encoder);
drm/i915: workaround IGD i2c bus issue in kernel side (v2) In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c access will be wrong. v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-07 11:02:28 +08:00
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
drm/i915: Fix DDC on some systems by clearing BIOS GMBUS setup. This is a sync of a fix I made in the old UMS code. If the BIOS uses the GMBUS and doesn't clear that setup, then our bit-banging I2C can fail, leading to monitors not being detected. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-02 03:56:30 +08:00
void intel_i2c_reset_gmbus(struct drm_device *dev);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern void intel_crt_init(struct drm_device *dev);
drm/i915: Add support for integrated HDMI on G4X hardware. This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-03 05:33:00 +08:00
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
drm/i915: add dynamic clock frequency control There are several sources of unnecessary power consumption on Intel graphics systems. The first is the LVDS clock. TFTs don't suffer from persistence issues like CRTs, and so we can reduce the LVDS refresh rate when the screen is idle. It will be automatically upclocked when userspace triggers graphical activity. Beyond that, we can enable memory self refresh. This allows the memory to go into a lower power state when the graphics are idle. Finally, we can drop some clocks on the gpu itself. All of these things can be reenabled between frames when GPU activity is triggered, and so there should be no user visible graphical changes. Signed-off-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-18 04:31:43 +08:00
extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern void intel_lvds_init(struct drm_device *dev);
drm/i915: Add Display Port support Signed-off-by: Keith Packard <keithp@keithp.com>
2009-04-08 07:16:42 +08:00
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
drm/i915: Add the support of eDP on DP-D for Ibex/CPT This one adds support for eDP that connected on PCH DP-D port instead of CPU DP-A port, and only DP-D port could be used for eDP. https://bugs.freedesktop.org/show_bug.cgi?id=27220 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Jan-Hendrik Zab <jan@jhz.name> Tested-by: Templar <templar@rshc.de> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-06-12 14:32:21 +08:00
extern bool intel_pch_has_edp(struct drm_crtc *crtc);
drm/i915: Initialize LVDS and eDP outputs before anything else This makes them sort to the front in X, which makes them likely to be the primary outputs if you haven't specified a preference in your DE, which is likely to be what you want. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-17 02:46:29 +08:00
extern bool intel_dpd_is_edp(struct drm_device *dev);
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
extern void intel_edp_link_config (struct intel_encoder *, int *, int *);
drm/i915: Add eDP support on IGDNG mobile chip This adds embedded DisplayPort support on next mobile chip which aims to replace origin LVDS port. VBT's driver feature block has been used to determine the type of current internal panel for eDP or LVDS. Currently no panel fitting support for eDP and backlight control would be added in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-24 01:00:32 +08:00
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
drm/i915: Enable aspect/centering panel fitting for Ironlake. v2: Hook in DP paths to keep FULLSCREEN panel fitting on eDP. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-07 18:01:28 +08:00
extern void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode);
extern void intel_pch_panel_fitting(struct drm_device *dev,
int fitting_mode,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
extern int intel_panel_fitter_pipe (struct drm_device *dev);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern void intel_crtc_load_lut(struct drm_crtc *crtc);
extern void intel_encoder_prepare (struct drm_encoder *encoder);
extern void intel_encoder_commit (struct drm_encoder *encoder);
drm/i915: Subclass intel_encoder. Subclass intel_encoder to reduce the pointer dance through intel_encoder->dev_priv. 10 files changed, 896 insertions(+), 997 deletions(-) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-04 20:50:23 +08:00
extern void intel_encoder_destroy(struct drm_encoder *encoder);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
drm/i915: Add new helper to return current attached encoder for connector For introducing splitted encoder/connector structure, this helper will return connector's attached encoder when needed. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:29 +08:00
extern struct drm_encoder *intel_attached_encoder(struct drm_connector *connector);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth <cworth@cworth.org> [anholt: Style touchups from review] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-30 05:43:54 +08:00
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_file *file_priv);
drm/i915: wait for actual vblank, not just 20ms Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-08-19 04:20:54 +08:00
extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
drm/i915: passing drm connector param for load detection In load detection, connector's encoder assignment must be kept consistent for proper mode setting, and this makes connector as explicit parameter for load detect function to not require single data structure to hold both encoder and connector reference, ease the transition for splitted encoder/connector model. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:30 +08:00
struct drm_connector *connector,
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
struct drm_display_mode *mode,
int *dpms_mode);
drm/i915: Rename intel_output to intel_encoder. The intel_output naming is inherited from the UMS code, which had a structure of screen -> CRTC -> output. The DRM code has an additional notion of encoder/connector, so the structure is screen -> CRTC -> encoder -> connector. This is a useful structure for SDVO encoders which can support multiple connectors (each of which requires different programming in the one encoder and could be connected to different CRTCs), or for DVI-I, where multiple encoders feed into the connector for whether it's used for digital or analog. Most of our code is encoder-related, so transition it to talking about encoders before we start trying to distinguish connectors. This patch is produced by sed s/intel_output/intel_encoder/ over the driver. Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-26 02:11:14 +08:00
extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
drm/i915: passing drm connector param for load detection In load detection, connector's encoder assignment must be kept consistent for proper mode setting, and this makes connector as explicit parameter for load detect function to not require single data structure to hold both encoder and connector reference, ease the transition for splitted encoder/connector model. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-30 14:39:30 +08:00
struct drm_connector *connector,
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
int dpms_mode);
extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
drm/fb: add more correct 8/16/24/32 bpp fb support. The previous patches had some unwanted side effects, I've fixed the lack of 32bpp working, and fixed up 16bpp so it should also work. this also adds the interface to allow the driver to set a preferred console depth so for example low memory rn50 can set it to 8bpp. It also catches 24bpp on cards that can't do it and forces 32bpp. Tested on r100/r600/i945. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06 11:54:01 +08:00
extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, int regno);
drm/i915: restore render clock gating on resume Rather than restoring just a few clock gating registers on resume, just reinitialize the whole thing. Signed-off-by: Andy Lutomirski <luto@mit.edu> [anholt: Fixed up for RC6 support landed since the patch was written] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-09 02:49:51 +08:00
extern void intel_init_clock_gating(struct drm_device *dev);
drm/i915: add dynamic performance control support for Ironlake Ironlake (and 965GM, which this patch doesn't support) supports a hardware performance and power management feature that allows it to adjust to changes in GPU load over time with software help. The goal if this is to maximize performance/power for a given workload. This patch enables that feature, which is also a requirement for supporting Intelligent Power Sharing, a feature which allows for dynamic budgeting of power between the CPU and GPU in Arrandale platforms. Tested-by: ykzhao <yakui.zhao@intel.com> [anholt: Resolved against the irq handler loop removal] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-30 03:27:07 +08:00
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
drm/i915: Use the correct scanout alignment for fbcon. This fixes a potential modesetting error during boot with plymouth on Broadwater and Crestline introduced with 9df47c. The framebuffer was hard-coding an alignment of 64K, but the modesetting code required the documented alignment of 128K. The result was that we would attempt to unbind the pinned fbcon buffer, triggering an ERROR and ultimately failing the mode change. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-24 06:32:05 +08:00
extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_gem_object *obj);
drm/fb: fix fbdev object model + cleanup properly. The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work. This patch a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs. b) migrated all the fb helper functions out of the crtc helper file into the fb helper file. c) pushed the fb probing/hotplug control into the driver d) makes the surface sizes into a structure for ease of passing This changes the intel/radeon/nouveau drivers to use the new helper. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-30 13:34:13 +08:00
extern int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
struct drm_mode_fb_cmd *mode_cmd,
struct drm_gem_object *obj);
extern int intel_fbdev_init(struct drm_device *dev);
extern void intel_fbdev_fini(struct drm_device *dev);
drm/vgaarb: add VGA arbitration support to the drm and kms. VGA arb requires DRM support for non-kms drivers, to turn on/off irqs when disabling the mem/io regions. VGA arb requires KMS support for GPUs where we can turn off VGA decoding. Currently we know how to do this for intel and radeon kms drivers, which allows them to be removed from the arbiter. This patch comes from Fedora rawhide kernel. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 12:33:58 +08:00
drm/i915: Add intel implementation of the pageflip ioctl Acked-by: Jakob Bornecrantz <jakob@vmware.com> Acked-by: Thomas Hellström <thomas@shipmail.org> Review-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse "Orange Smoothie" Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-19 00:25:18 +08:00
extern void intel_prepare_page_flip(struct drm_device *dev, int plane);
extern void intel_finish_page_flip(struct drm_device *dev, int pipe);
drm/i915: gen3 page flipping fixes Gen3 chips have slightly different flip commands, and also contain a bit that indicates whether a "flip pending" interrupt means the flip has been queued or has been completed. So implement support for the gen3 flip command, and make sure we use the flip pending interrupt correctly depending on the value of ECOSKPD bit 0. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-03-27 01:35:20 +08:00
extern void intel_finish_page_flip_plane(struct drm_device *dev, int plane);
drm/i915: Add intel implementation of the pageflip ioctl Acked-by: Jakob Bornecrantz <jakob@vmware.com> Acked-by: Thomas Hellström <thomas@shipmail.org> Review-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse "Orange Smoothie" Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-19 00:25:18 +08:00
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
extern void intel_setup_overlay(struct drm_device *dev);
extern void intel_cleanup_overlay(struct drm_device *dev);
extern int intel_overlay_switch_off(struct intel_overlay *overlay);
drm/i915: implement interruptible sleeps in the overlay code At least for the common case of userspace ioctls. When doing a modeset operation, the wait is still uninterruptible. But considering that failing to turn off the overlay when switching off the crtc it's running on hangs the chip, it doesn't complicate matters _very_ much. There's just an unkillable X in addition to a black screen. BUG() about it and explain in the code. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:37 +08:00
extern int intel_overlay_recover_from_interrupt(struct intel_overlay *overlay,
int interruptible);
drm/i915: implement drmmode overlay support v4 This implements intel overlay support for kms via a device-specific ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on dri-devel). We've reached the conclusion that such an infrastructure only makes sense when multiple kms overlay implementations exists, which atm don't (and it doesn't look like this is gonna change). Open issues: - Runs in sync with the gpu, i.e. unnecessary waiting. I've decided to wait on this because the hw tends to hang when changing something in this area. I left some dummy functions as infrastructure. - polyphase filtering uses a static table. - uses uninterruptible sleeps. Unfortunately the alternatives may unnecessarily wedged the hw if/when we timeout too early (and userspace only overloaded the batch buffers with stuff worth a few secs of gpu time). Changes since v1: - fix off-by-one misconception on my side. This fixes fullscreen playback. Changes since v2: - add underrun detection as spec'ed for i965. - flush caches properly, fixing visual corruptions. Changes since v4: - fix up cache flushing of overlay memory regs. - killed require_pipe_a logic - it hangs the chip. Tested-By: diego.abelenda@gmail.com (on a 865G) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [anholt: Resolved against the MADVISE ioctl going in before this one] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-16 04:57:34 +08:00
extern int intel_overlay_put_image(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int intel_overlay_attrs(struct drm_device *dev, void *data,
struct drm_file *file_priv);
drm/kms/fb: use slow work mechanism for normal hotplug also. a) slow work is always used now for any fbcon hotplug, as its not a fast task and is more suited to being ran under slow work. b) attempt to not do any fbdev changes when X is running as we'll just mess it up. This hooks set_par to hopefully do the changes once X hands control to fbdev. This also adds the nouveau/intel hotplug support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-30 13:34:18 +08:00
drm/fbdev: rework output polling to be back in the core. (v4) After thinking it over a lot it made more sense for the core to deal with the output polling especially so it can notify X. v2: drop plans for fake connector - per Michel's comments - fix X patch sent to xorg-devel, add intel polled/hpd setting, add initial nouveau polled/hpd settings. v3: add config lock take inside polling, add intel/nouveau poll init/fini calls v4: config lock was a bit agressive, only needed around connector list reading. otherwise it could re-enter. glisse: discard drm_helper_hpd_irq_event v3: Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-07 14:42:51 +08:00
extern void intel_fb_output_poll_changed(struct drm_device *dev);
DRM: i915: add mode setting support This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 06:24:08 +08:00
#endif /* __INTEL_DRV_H__ */