2019-07-31 23:57:31 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2018-07-26 20:21:58 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2018 HUAWEI, Inc.
|
|
|
|
* http://www.huawei.com/
|
|
|
|
* Created by Gao Xiang <gaoxiang25@huawei.com>
|
|
|
|
*/
|
2019-07-31 23:57:32 +08:00
|
|
|
#include "zdata.h"
|
2019-06-24 15:22:54 +08:00
|
|
|
#include "compress.h"
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
#include <linux/prefetch.h>
|
|
|
|
|
2018-09-18 22:27:27 +08:00
|
|
|
#include <trace/events/erofs.h>
|
|
|
|
|
2018-12-08 00:19:14 +08:00
|
|
|
/*
|
|
|
|
* a compressed_pages[] placeholder in order to avoid
|
|
|
|
* being filled with file pages for in-place decompression.
|
|
|
|
*/
|
|
|
|
#define PAGE_UNALLOCATED ((void *)0x5F0E4B1D)
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* how to allocate cached pages for a pcluster */
|
2018-12-08 00:19:16 +08:00
|
|
|
enum z_erofs_cache_alloctype {
|
|
|
|
DONTALLOC, /* don't allocate any cached pages */
|
|
|
|
DELAYEDALLOC, /* delayed allocation (at the time of submitting io) */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* tagged pointer with 1-bit tag for all compressed pages
|
|
|
|
* tag 0 - the page is just found with an extra page reference
|
|
|
|
*/
|
|
|
|
typedef tagptr1_t compressed_page_t;
|
|
|
|
|
|
|
|
#define tag_compressed_page_justfound(page) \
|
|
|
|
tagptr_fold(compressed_page_t, page, 1)
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
static struct workqueue_struct *z_erofs_workqueue __read_mostly;
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct kmem_cache *pcluster_cachep __read_mostly;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
void z_erofs_exit_zip_subsystem(void)
|
|
|
|
{
|
|
|
|
destroy_workqueue(z_erofs_workqueue);
|
2019-07-31 23:57:47 +08:00
|
|
|
kmem_cache_destroy(pcluster_cachep);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-09-04 10:09:05 +08:00
|
|
|
static inline int z_erofs_init_workqueue(void)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2018-09-11 03:41:14 +08:00
|
|
|
const unsigned int onlinecpus = num_possible_cpus();
|
2019-07-31 23:57:47 +08:00
|
|
|
const unsigned int flags = WQ_UNBOUND | WQ_HIGHPRI | WQ_CPU_INTENSIVE;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* no need to spawn too many threads, limiting threads could minimum
|
|
|
|
* scheduling overhead, perhaps per-CPU threads should be better?
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_workqueue = alloc_workqueue("erofs_unzipd", flags,
|
|
|
|
onlinecpus + onlinecpus / 4);
|
2018-11-13 04:43:57 +08:00
|
|
|
return z_erofs_workqueue ? 0 : -ENOMEM;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-09-04 10:09:05 +08:00
|
|
|
static void z_erofs_pcluster_init_once(void *ptr)
|
2018-11-23 01:21:46 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *pcl = ptr;
|
|
|
|
struct z_erofs_collection *cl = z_erofs_primarycollection(pcl);
|
2018-11-23 01:21:46 +08:00
|
|
|
unsigned int i;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
mutex_init(&cl->lock);
|
|
|
|
cl->nr_pages = 0;
|
|
|
|
cl->vcnt = 0;
|
2018-11-23 01:21:46 +08:00
|
|
|
for (i = 0; i < Z_EROFS_CLUSTER_MAX_PAGES; ++i)
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl->compressed_pages[i] = NULL;
|
2018-11-23 01:21:46 +08:00
|
|
|
}
|
|
|
|
|
2019-09-04 10:09:05 +08:00
|
|
|
static void z_erofs_pcluster_init_always(struct z_erofs_pcluster *pcl)
|
2018-11-23 01:21:46 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl = z_erofs_primarycollection(pcl);
|
2018-11-23 01:21:46 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
atomic_set(&pcl->obj.refcount, 1);
|
2018-11-23 01:21:46 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(cl->nr_pages);
|
|
|
|
DBG_BUGON(cl->vcnt);
|
2018-11-23 01:21:46 +08:00
|
|
|
}
|
|
|
|
|
2018-10-09 21:43:53 +08:00
|
|
|
int __init z_erofs_init_zip_subsystem(void)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
pcluster_cachep = kmem_cache_create("erofs_compress",
|
|
|
|
Z_EROFS_WORKGROUP_SIZE, 0,
|
2019-09-04 10:09:05 +08:00
|
|
|
SLAB_RECLAIM_ACCOUNT,
|
|
|
|
z_erofs_pcluster_init_once);
|
2019-07-31 23:57:47 +08:00
|
|
|
if (pcluster_cachep) {
|
2019-09-04 10:09:05 +08:00
|
|
|
if (!z_erofs_init_workqueue())
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return 0;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
kmem_cache_destroy(pcluster_cachep);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
enum z_erofs_collectmode {
|
|
|
|
COLLECT_SECONDARY,
|
|
|
|
COLLECT_PRIMARY,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* The current collection was the tail of an exist chain, in addition
|
|
|
|
* that the previous processed chained collections are all decided to
|
|
|
|
* be hooked up to it.
|
|
|
|
* A new chain will be created for the remaining collections which are
|
|
|
|
* not processed yet, therefore different from COLLECT_PRIMARY_FOLLOWED,
|
|
|
|
* the next collection cannot reuse the whole page safely in
|
|
|
|
* the following scenario:
|
2019-02-27 13:33:32 +08:00
|
|
|
* ________________________________________________________________
|
|
|
|
* | tail (partial) page | head (partial) page |
|
2019-07-31 23:57:47 +08:00
|
|
|
* | (belongs to the next cl) | (belongs to the current cl) |
|
2019-02-27 13:33:32 +08:00
|
|
|
* |_______PRIMARY_FOLLOWED_______|________PRIMARY_HOOKED___________|
|
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
COLLECT_PRIMARY_HOOKED,
|
|
|
|
COLLECT_PRIMARY_FOLLOWED_NOINPLACE,
|
2019-02-27 13:33:32 +08:00
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* The current collection has been linked with the owned chain, and
|
|
|
|
* could also be linked with the remaining collections, which means
|
|
|
|
* if the processing page is the tail page of the collection, thus
|
|
|
|
* the current collection can safely use the whole page (since
|
|
|
|
* the previous collection is under control) for in-place I/O, as
|
|
|
|
* illustrated below:
|
2019-02-27 13:33:32 +08:00
|
|
|
* ________________________________________________________________
|
2019-07-31 23:57:47 +08:00
|
|
|
* | tail (partial) page | head (partial) page |
|
|
|
|
* | (of the current cl) | (of the previous collection) |
|
|
|
|
* | PRIMARY_FOLLOWED or | |
|
|
|
|
* |_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|
|
2019-02-27 13:33:32 +08:00
|
|
|
*
|
2019-07-31 23:57:47 +08:00
|
|
|
* [ (*) the above page can be used as inplace I/O. ]
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
COLLECT_PRIMARY_FOLLOWED,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
};
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collector {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct z_erofs_pagevec_ctor vector;
|
|
|
|
|
2019-08-21 11:09:08 +08:00
|
|
|
struct z_erofs_pcluster *pcl, *tailpcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl;
|
|
|
|
struct page **compressedpages;
|
|
|
|
z_erofs_next_pcluster_t owned_head;
|
|
|
|
|
|
|
|
enum z_erofs_collectmode mode;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
};
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_decompress_frontend {
|
|
|
|
struct inode *const inode;
|
|
|
|
|
|
|
|
struct z_erofs_collector clt;
|
|
|
|
struct erofs_map_blocks map;
|
|
|
|
|
|
|
|
/* used for applying cache strategy on the fly */
|
|
|
|
bool backmost;
|
|
|
|
erofs_off_t headoffset;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define COLLECTOR_INIT() { \
|
|
|
|
.owned_head = Z_EROFS_PCLUSTER_TAIL, \
|
|
|
|
.mode = COLLECT_PRIMARY_FOLLOWED }
|
|
|
|
|
|
|
|
#define DECOMPRESS_FRONTEND_INIT(__i) { \
|
|
|
|
.inode = __i, .clt = COLLECTOR_INIT(), \
|
|
|
|
.backmost = true, }
|
|
|
|
|
|
|
|
static struct page *z_pagemap_global[Z_EROFS_VMAP_GLOBAL_PAGES];
|
|
|
|
static DEFINE_MUTEX(z_pagemap_global_lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void preload_compressed_pages(struct z_erofs_collector *clt,
|
2018-12-08 00:19:16 +08:00
|
|
|
struct address_space *mc,
|
|
|
|
enum z_erofs_cache_alloctype type,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct list_head *pagepool)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
const struct z_erofs_pcluster *pcl = clt->pcl;
|
|
|
|
const unsigned int clusterpages = BIT(pcl->clusterbits);
|
|
|
|
struct page **pages = clt->compressedpages;
|
|
|
|
pgoff_t index = pcl->obj.index + (pages - pcl->compressed_pages);
|
2018-12-08 00:19:16 +08:00
|
|
|
bool standalone = true;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (clt->mode < COLLECT_PRIMARY_FOLLOWED)
|
2018-12-08 00:19:16 +08:00
|
|
|
return;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
for (; pages < pcl->compressed_pages + clusterpages; ++pages) {
|
2018-12-08 00:19:16 +08:00
|
|
|
struct page *page;
|
|
|
|
compressed_page_t t;
|
|
|
|
|
|
|
|
/* the compressed page was loaded before */
|
2019-07-31 23:57:47 +08:00
|
|
|
if (READ_ONCE(*pages))
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
page = find_get_page(mc, index);
|
2018-12-08 00:19:16 +08:00
|
|
|
|
|
|
|
if (page) {
|
|
|
|
t = tag_compressed_page_justfound(page);
|
|
|
|
} else if (type == DELAYEDALLOC) {
|
|
|
|
t = tagptr_init(compressed_page_t, PAGE_UNALLOCATED);
|
|
|
|
} else { /* DONTALLOC */
|
|
|
|
if (standalone)
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->compressedpages = pages;
|
2018-12-08 00:19:16 +08:00
|
|
|
standalone = false;
|
|
|
|
continue;
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!cmpxchg_relaxed(pages, NULL, tagptr_cast_ptr(t)))
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
if (page)
|
|
|
|
put_page(page);
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
2018-12-08 00:19:16 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (standalone) /* downgrade to PRIMARY_FOLLOWED_NOINPLACE */
|
|
|
|
clt->mode = COLLECT_PRIMARY_FOLLOWED_NOINPLACE;
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* called by erofs_shrinker to get rid of all compressed_pages */
|
2018-07-29 13:34:58 +08:00
|
|
|
int erofs_try_to_free_all_cached_pages(struct erofs_sb_info *sbi,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct erofs_workgroup *grp)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(grp, struct z_erofs_pcluster, obj);
|
2018-12-08 00:19:13 +08:00
|
|
|
struct address_space *const mapping = MNGD_MAPPING(sbi);
|
2019-07-31 23:57:47 +08:00
|
|
|
const unsigned int clusterpages = BIT(pcl->clusterbits);
|
2018-07-26 20:22:07 +08:00
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* refcount of workgroup is now freezed as 1,
|
|
|
|
* therefore no need to worry about available decompression users.
|
|
|
|
*/
|
|
|
|
for (i = 0; i < clusterpages; ++i) {
|
2019-07-31 23:57:47 +08:00
|
|
|
struct page *page = pcl->compressed_pages[i];
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!page)
|
2018-07-26 20:22:07 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
/* block other users from reclaiming or migrating the page */
|
|
|
|
if (!trylock_page(page))
|
|
|
|
return -EBUSY;
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (page->mapping != mapping)
|
2019-07-31 23:57:47 +08:00
|
|
|
continue;
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* barrier is implied in the following 'unlock_page' */
|
|
|
|
WRITE_ONCE(pcl->compressed_pages[i], NULL);
|
2018-07-26 20:22:07 +08:00
|
|
|
set_page_private(page, 0);
|
|
|
|
ClearPagePrivate(page);
|
|
|
|
|
|
|
|
unlock_page(page);
|
|
|
|
put_page(page);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-07-29 13:34:58 +08:00
|
|
|
int erofs_try_to_free_cached_page(struct address_space *mapping,
|
|
|
|
struct page *page)
|
2018-07-26 20:22:07 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl = (void *)page_private(page);
|
|
|
|
const unsigned int clusterpages = BIT(pcl->clusterbits);
|
2018-07-26 20:22:07 +08:00
|
|
|
int ret = 0; /* 0 - busy */
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (erofs_workgroup_try_to_freeze(&pcl->obj, 1)) {
|
2018-07-26 20:22:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < clusterpages; ++i) {
|
2019-07-31 23:57:47 +08:00
|
|
|
if (pcl->compressed_pages[i] == page) {
|
|
|
|
WRITE_ONCE(pcl->compressed_pages[i], NULL);
|
2018-07-26 20:22:07 +08:00
|
|
|
ret = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_workgroup_unfreeze(&pcl->obj, 1);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-02-16 16:46:50 +08:00
|
|
|
if (ret) {
|
|
|
|
ClearPagePrivate(page);
|
|
|
|
put_page(page);
|
|
|
|
}
|
2018-07-26 20:22:07 +08:00
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* page_type must be Z_EROFS_PAGE_TYPE_EXCLUSIVE */
|
2019-09-04 10:09:05 +08:00
|
|
|
static inline bool z_erofs_try_inplace_io(struct z_erofs_collector *clt,
|
|
|
|
struct page *page)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl = clt->pcl;
|
|
|
|
const unsigned int clusterpages = BIT(pcl->clusterbits);
|
|
|
|
|
|
|
|
while (clt->compressedpages < pcl->compressed_pages + clusterpages) {
|
|
|
|
if (!cmpxchg(clt->compressedpages++, NULL, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* callers must be with collection lock held */
|
|
|
|
static int z_erofs_attach_page(struct z_erofs_collector *clt,
|
|
|
|
struct page *page,
|
|
|
|
enum z_erofs_page_type type)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
bool occupied;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* give priority for inplaceio */
|
|
|
|
if (clt->mode >= COLLECT_PRIMARY &&
|
2019-03-19 07:58:41 +08:00
|
|
|
type == Z_EROFS_PAGE_TYPE_EXCLUSIVE &&
|
2019-09-04 10:09:05 +08:00
|
|
|
z_erofs_try_inplace_io(clt, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return 0;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
ret = z_erofs_pagevec_enqueue(&clt->vector,
|
2019-07-31 23:57:45 +08:00
|
|
|
page, type, &occupied);
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->cl->vcnt += (unsigned int)ret;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
return ret ? 0 : -EAGAIN;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static enum z_erofs_collectmode
|
|
|
|
try_to_claim_pcluster(struct z_erofs_pcluster *pcl,
|
|
|
|
z_erofs_next_pcluster_t *owned_head)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
/* let's claim these following types of pclusters */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
retry:
|
2019-07-31 23:57:47 +08:00
|
|
|
if (pcl->next == Z_EROFS_PCLUSTER_NIL) {
|
|
|
|
/* type 1, nil pcluster */
|
|
|
|
if (cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_NIL,
|
|
|
|
*owned_head) != Z_EROFS_PCLUSTER_NIL)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto retry;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
*owned_head = &pcl->next;
|
2019-02-27 13:33:32 +08:00
|
|
|
/* lucky, I am the followee :) */
|
2019-07-31 23:57:47 +08:00
|
|
|
return COLLECT_PRIMARY_FOLLOWED;
|
|
|
|
} else if (pcl->next == Z_EROFS_PCLUSTER_TAIL) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/*
|
|
|
|
* type 2, link to the end of a existing open chain,
|
|
|
|
* be careful that its submission itself is governed
|
|
|
|
* by the original owned chain.
|
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
if (cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
|
|
|
|
*owned_head) != Z_EROFS_PCLUSTER_TAIL)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto retry;
|
2019-07-31 23:57:47 +08:00
|
|
|
*owned_head = Z_EROFS_PCLUSTER_TAIL;
|
|
|
|
return COLLECT_PRIMARY_HOOKED;
|
2019-02-27 13:33:32 +08:00
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
return COLLECT_PRIMARY; /* :( better luck next time */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct z_erofs_collection *cllookup(struct z_erofs_collector *clt,
|
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct erofs_workgroup *grp;
|
|
|
|
struct z_erofs_pcluster *pcl;
|
|
|
|
struct z_erofs_collection *cl;
|
|
|
|
unsigned int length;
|
|
|
|
bool tag;
|
|
|
|
|
|
|
|
grp = erofs_find_workgroup(inode->i_sb, map->m_pa >> PAGE_SHIFT, &tag);
|
|
|
|
if (!grp)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return NULL;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl = container_of(grp, struct z_erofs_pcluster, obj);
|
2019-08-21 11:09:08 +08:00
|
|
|
if (clt->owned_head == &pcl->next || pcl == clt->tailpcl) {
|
|
|
|
DBG_BUGON(1);
|
|
|
|
erofs_workgroup_put(grp);
|
|
|
|
return ERR_PTR(-EFSCORRUPTED);
|
|
|
|
}
|
2019-07-31 23:57:47 +08:00
|
|
|
|
|
|
|
cl = z_erofs_primarycollection(pcl);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (cl->pageofs != (map->m_la & ~PAGE_MASK)) {
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(1);
|
2019-08-19 18:34:23 +08:00
|
|
|
erofs_workgroup_put(grp);
|
|
|
|
return ERR_PTR(-EFSCORRUPTED);
|
2019-07-31 23:57:47 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
length = READ_ONCE(pcl->length);
|
|
|
|
if (length & Z_EROFS_PCLUSTER_FULL_LENGTH) {
|
|
|
|
if ((map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) > length) {
|
|
|
|
DBG_BUGON(1);
|
2019-08-19 18:34:23 +08:00
|
|
|
erofs_workgroup_put(grp);
|
|
|
|
return ERR_PTR(-EFSCORRUPTED);
|
2019-07-31 23:57:47 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
unsigned int llen = map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (map->m_flags & EROFS_MAP_FULL_MAPPED)
|
|
|
|
llen |= Z_EROFS_PCLUSTER_FULL_LENGTH;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
while (llen > length &&
|
|
|
|
length != cmpxchg_relaxed(&pcl->length, length, llen)) {
|
|
|
|
cpu_relax();
|
|
|
|
length = READ_ONCE(pcl->length);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
mutex_lock(&cl->lock);
|
2019-08-21 11:09:08 +08:00
|
|
|
/* used to check tail merging loop due to corrupted images */
|
|
|
|
if (clt->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
clt->tailpcl = pcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->mode = try_to_claim_pcluster(pcl, &clt->owned_head);
|
2019-08-21 11:09:08 +08:00
|
|
|
/* clean tailpcl if the current owned_head is Z_EROFS_PCLUSTER_TAIL */
|
|
|
|
if (clt->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
clt->tailpcl = NULL;
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->pcl = pcl;
|
|
|
|
clt->cl = cl;
|
|
|
|
return cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct z_erofs_collection *clregister(struct z_erofs_collector *clt,
|
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *pcl;
|
|
|
|
struct z_erofs_collection *cl;
|
|
|
|
int err;
|
2018-09-19 13:49:07 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* no available workgroup, let's allocate one */
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl = kmem_cache_alloc(pcluster_cachep, GFP_NOFS);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!pcl)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
2019-09-04 10:09:05 +08:00
|
|
|
z_erofs_pcluster_init_always(pcl);
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl->obj.index = map->m_pa >> PAGE_SHIFT;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl->length = (map->m_llen << Z_EROFS_PCLUSTER_LENGTH_BIT) |
|
|
|
|
(map->m_flags & EROFS_MAP_FULL_MAPPED ?
|
|
|
|
Z_EROFS_PCLUSTER_FULL_LENGTH : 0);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (map->m_flags & EROFS_MAP_ZIPPED)
|
|
|
|
pcl->algorithmformat = Z_EROFS_COMPRESSION_LZ4;
|
|
|
|
else
|
|
|
|
pcl->algorithmformat = Z_EROFS_COMPRESSION_SHIFTED;
|
|
|
|
|
2019-09-04 10:08:56 +08:00
|
|
|
pcl->clusterbits = EROFS_I(inode)->z_physical_clusterbits[0];
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl->clusterbits -= PAGE_SHIFT;
|
2019-06-24 15:22:58 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* new pclusters should be claimed as type 1, primary and followed */
|
|
|
|
pcl->next = clt->owned_head;
|
|
|
|
clt->mode = COLLECT_PRIMARY_FOLLOWED;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
cl = z_erofs_primarycollection(pcl);
|
|
|
|
cl->pageofs = map->m_la & ~PAGE_MASK;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-11-23 01:21:47 +08:00
|
|
|
/*
|
|
|
|
* lock all primary followed works before visible to others
|
2019-07-31 23:57:47 +08:00
|
|
|
* and mutex_trylock *never* fails for a new pcluster.
|
2018-11-23 01:21:47 +08:00
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
mutex_trylock(&cl->lock);
|
2018-11-23 01:21:47 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
err = erofs_register_workgroup(inode->i_sb, &pcl->obj, 0);
|
|
|
|
if (err) {
|
|
|
|
mutex_unlock(&cl->lock);
|
|
|
|
kmem_cache_free(pcluster_cachep, pcl);
|
|
|
|
return ERR_PTR(-EAGAIN);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
2019-08-21 11:09:08 +08:00
|
|
|
/* used to check tail merging loop due to corrupted images */
|
|
|
|
if (clt->owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
clt->tailpcl = pcl;
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->owned_head = &pcl->next;
|
|
|
|
clt->pcl = pcl;
|
|
|
|
clt->cl = cl;
|
|
|
|
return cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static int z_erofs_collector_begin(struct z_erofs_collector *clt,
|
|
|
|
struct inode *inode,
|
|
|
|
struct erofs_map_blocks *map)
|
|
|
|
{
|
|
|
|
struct z_erofs_collection *cl;
|
2019-02-27 13:33:32 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(clt->cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* must be Z_EROFS_PCLUSTER_TAIL or pointed to previous collection */
|
|
|
|
DBG_BUGON(clt->owned_head == Z_EROFS_PCLUSTER_NIL);
|
|
|
|
DBG_BUGON(clt->owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!PAGE_ALIGNED(map->m_pa)) {
|
|
|
|
DBG_BUGON(1);
|
|
|
|
return -EINVAL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
repeat:
|
|
|
|
cl = cllookup(clt, inode, map);
|
|
|
|
if (!cl) {
|
|
|
|
cl = clregister(clt, inode, map);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (cl == ERR_PTR(-EAGAIN))
|
2019-07-31 23:57:47 +08:00
|
|
|
goto repeat;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (IS_ERR(cl))
|
|
|
|
return PTR_ERR(cl);
|
|
|
|
|
|
|
|
z_erofs_pagevec_ctor_init(&clt->vector, Z_EROFS_NR_INLINE_PAGEVECS,
|
|
|
|
cl->pagevec, cl->vcnt);
|
|
|
|
|
|
|
|
clt->compressedpages = clt->pcl->compressed_pages;
|
|
|
|
if (clt->mode <= COLLECT_PRIMARY) /* cannot do in-place I/O */
|
|
|
|
clt->compressedpages += Z_EROFS_CLUSTER_MAX_PAGES;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* keep in mind that no referenced pclusters will be freed
|
|
|
|
* only after a RCU grace period.
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
|
|
|
static void z_erofs_rcu_callback(struct rcu_head *head)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *const cl =
|
|
|
|
container_of(head, struct z_erofs_collection, rcu);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
kmem_cache_free(pcluster_cachep,
|
|
|
|
container_of(cl, struct z_erofs_pcluster,
|
|
|
|
primary_collection));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void erofs_workgroup_free_rcu(struct erofs_workgroup *grp)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(grp, struct z_erofs_pcluster, obj);
|
|
|
|
struct z_erofs_collection *const cl = z_erofs_primarycollection(pcl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
call_rcu(&cl->rcu, z_erofs_rcu_callback);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void z_erofs_collection_put(struct z_erofs_collection *cl)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *const pcl =
|
|
|
|
container_of(cl, struct z_erofs_pcluster, primary_collection);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_workgroup_put(&pcl->obj);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static bool z_erofs_collector_end(struct z_erofs_collector *clt)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl = clt->cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!cl)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return false;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_pagevec_ctor_exit(&clt->vector, false);
|
|
|
|
mutex_unlock(&cl->lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/*
|
2019-07-31 23:57:47 +08:00
|
|
|
* if all pending pages are added, don't hold its reference
|
|
|
|
* any longer if the pcluster isn't hosted by ourselves.
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
*/
|
2019-07-31 23:57:47 +08:00
|
|
|
if (clt->mode < COLLECT_PRIMARY_FOLLOWED_NOINPLACE)
|
|
|
|
z_erofs_collection_put(cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->cl = NULL;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct page *__stagingpage_alloc(struct list_head *pagepool,
|
|
|
|
gfp_t gfp)
|
|
|
|
{
|
2019-07-31 23:57:43 +08:00
|
|
|
struct page *page = erofs_allocpage(pagepool, gfp, true);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
page->mapping = Z_EROFS_MAPPING_STAGING;
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static bool should_alloc_managed_pages(struct z_erofs_decompress_frontend *fe,
|
2019-07-31 23:57:49 +08:00
|
|
|
unsigned int cachestrategy,
|
2019-07-31 23:57:47 +08:00
|
|
|
erofs_off_t la)
|
2018-12-08 00:19:16 +08:00
|
|
|
{
|
2019-07-31 23:57:49 +08:00
|
|
|
if (cachestrategy <= EROFS_ZIP_CACHE_DISABLED)
|
|
|
|
return false;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
if (fe->backmost)
|
|
|
|
return true;
|
|
|
|
|
2019-07-31 23:57:49 +08:00
|
|
|
return cachestrategy >= EROFS_ZIP_CACHE_READAROUND &&
|
|
|
|
la < fe->headoffset;
|
2018-12-08 00:19:16 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static int z_erofs_do_read_page(struct z_erofs_decompress_frontend *fe,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page *page,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct list_head *pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct inode *const inode = fe->inode;
|
|
|
|
struct erofs_sb_info *const sbi __maybe_unused = EROFS_I_SB(inode);
|
2019-01-15 09:42:21 +08:00
|
|
|
struct erofs_map_blocks *const map = &fe->map;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collector *const clt = &fe->clt;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
const loff_t offset = page_offset(page);
|
2019-09-22 18:04:34 +08:00
|
|
|
bool tight = true;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
enum z_erofs_cache_alloctype cache_strategy;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
enum z_erofs_page_type page_type;
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int cur, end, spiltted, index;
|
2018-09-18 22:27:25 +08:00
|
|
|
int err = 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* register locked file pages as online pages in pack */
|
|
|
|
z_erofs_onlinepage_init(page);
|
|
|
|
|
|
|
|
spiltted = 0;
|
|
|
|
end = PAGE_SIZE;
|
|
|
|
repeat:
|
|
|
|
cur = end - 1;
|
|
|
|
|
|
|
|
/* lucky, within the range of the current map_blocks */
|
|
|
|
if (offset + cur >= map->m_la &&
|
2019-03-19 07:58:41 +08:00
|
|
|
offset + cur < map->m_la + map->m_llen) {
|
2019-07-31 23:57:47 +08:00
|
|
|
/* didn't get a valid collection previously (very rare) */
|
|
|
|
if (!clt->cl)
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
goto restart_now;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto hitted;
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* go ahead the next map_blocks */
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_dbg("%s: [out-of-range] pos %llu", __func__, offset + cur);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (z_erofs_collector_end(clt))
|
2018-11-23 01:21:49 +08:00
|
|
|
fe->backmost = false;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
map->m_la = offset + cur;
|
|
|
|
map->m_llen = 0;
|
2019-07-31 23:57:47 +08:00
|
|
|
err = z_erofs_map_blocks_iter(inode, map, 0);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
staging: erofs: fix illegal address access under memory pressure
Considering a read request with two decompressed file pages,
If a decompression work cannot be started on the previous page
due to memory pressure but in-memory LTP map lookup is done,
builder->work should be still NULL.
Moreover, if the current page also belongs to the same map,
it won't try to start the decompression work again and then
run into trouble.
This patch aims to solve the above issue only with little changes
as much as possible in order to make the fix backport easier.
kernel message is:
<4>[1051408.015930s]SLUB: Unable to allocate memory on node -1, gfp=0x2408040(GFP_NOFS|__GFP_ZERO)
<4>[1051408.015930s] cache: erofs_compress, object size: 144, buffer size: 144, default order: 0, min order: 0
<4>[1051408.015930s] node 0: slabs: 98, objs: 2744, free: 0
* Cannot allocate the decompression work
<3>[1051408.015960s]erofs: z_erofs_vle_normalaccess_readpages, readahead error at page 1008 of nid 5391488
* Note that the previous page was failed to read
<0>[1051408.015960s]Internal error: Accessing user space memory outside uaccess.h routines: 96000005 [#1] PREEMPT SMP
...
<4>[1051408.015991s]Hardware name: kirin710 (DT)
...
<4>[1051408.016021s]PC is at z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.016021s]LR is at z_erofs_do_read_page+0x12c/0xcf0
...
<4>[1051408.018096s][<ffffff80c6fb0fd4>] z_erofs_vle_work_add_page+0xa0/0x17c
<4>[1051408.018096s][<ffffff80c6fb3814>] z_erofs_vle_normalaccess_readpages+0x1a0/0x37c
<4>[1051408.018096s][<ffffff80c6d670b8>] read_pages+0x70/0x190
<4>[1051408.018127s][<ffffff80c6d6736c>] __do_page_cache_readahead+0x194/0x1a8
<4>[1051408.018127s][<ffffff80c6d59318>] filemap_fault+0x398/0x684
<4>[1051408.018127s][<ffffff80c6d8a9e0>] __do_fault+0x8c/0x138
<4>[1051408.018127s][<ffffff80c6d8f90c>] handle_pte_fault+0x730/0xb7c
<4>[1051408.018127s][<ffffff80c6d8fe04>] __handle_mm_fault+0xac/0xf4
<4>[1051408.018157s][<ffffff80c6d8fec8>] handle_mm_fault+0x7c/0x118
<4>[1051408.018157s][<ffffff80c8c52998>] do_page_fault+0x354/0x474
<4>[1051408.018157s][<ffffff80c8c52af8>] do_translation_fault+0x40/0x48
<4>[1051408.018157s][<ffffff80c6c002f4>] do_mem_abort+0x80/0x100
<4>[1051408.018310s]---[ end trace 9f4009a3283bd78b ]---
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27 13:33:31 +08:00
|
|
|
restart_now:
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!(map->m_flags & EROFS_MAP_MAPPED))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto hitted;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
err = z_erofs_collector_begin(clt, inode, map);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
/* preload all compressed pages (maybe downgrade role if necessary) */
|
2019-07-31 23:57:49 +08:00
|
|
|
if (should_alloc_managed_pages(fe, sbi->cache_strategy, map->m_la))
|
2018-12-08 00:19:16 +08:00
|
|
|
cache_strategy = DELAYEDALLOC;
|
|
|
|
else
|
|
|
|
cache_strategy = DONTALLOC;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
preload_compressed_pages(clt, MNGD_MAPPING(sbi),
|
|
|
|
cache_strategy, pagepool);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
hitted:
|
2019-09-22 18:04:34 +08:00
|
|
|
/*
|
|
|
|
* Ensure the current partial page belongs to this submit chain rather
|
|
|
|
* than other concurrent submit chains or the noio(bypass) chain since
|
|
|
|
* those chains are handled asynchronously thus the page cannot be used
|
|
|
|
* for inplace I/O or pagevec (should be processed in strict order.)
|
|
|
|
*/
|
|
|
|
tight &= (clt->mode >= COLLECT_PRIMARY_HOOKED &&
|
|
|
|
clt->mode != COLLECT_PRIMARY_FOLLOWED_NOINPLACE);
|
|
|
|
|
2018-09-11 03:41:14 +08:00
|
|
|
cur = end - min_t(unsigned int, offset + end - map->m_la, end);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!(map->m_flags & EROFS_MAP_MAPPED)) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
zero_user_segment(page, cur, end);
|
|
|
|
goto next_part;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* let's derive page type */
|
|
|
|
page_type = cur ? Z_EROFS_VLE_PAGE_TYPE_HEAD :
|
|
|
|
(!spiltted ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
|
|
|
|
(tight ? Z_EROFS_PAGE_TYPE_EXCLUSIVE :
|
|
|
|
Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED));
|
|
|
|
|
2019-02-27 13:33:32 +08:00
|
|
|
if (cur)
|
2019-07-31 23:57:47 +08:00
|
|
|
tight &= (clt->mode >= COLLECT_PRIMARY_FOLLOWED);
|
2019-02-27 13:33:32 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
retry:
|
2019-07-31 23:57:47 +08:00
|
|
|
err = z_erofs_attach_page(clt, page, page_type);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* should allocate an additional staging page for pagevec */
|
|
|
|
if (err == -EAGAIN) {
|
|
|
|
struct page *const newpage =
|
2019-07-31 23:57:47 +08:00
|
|
|
__stagingpage_alloc(pagepool, GFP_NOFS);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
err = z_erofs_attach_page(clt, newpage,
|
|
|
|
Z_EROFS_PAGE_TYPE_EXCLUSIVE);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto err_out;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
index = page->index - (map->m_la >> PAGE_SHIFT);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
z_erofs_onlinepage_fixup(page, index, true);
|
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
/* bump up the number of spiltted parts of a page */
|
|
|
|
++spiltted;
|
|
|
|
/* also update nr_pages */
|
2019-07-31 23:57:47 +08:00
|
|
|
clt->cl->nr_pages = max_t(pgoff_t, clt->cl->nr_pages, index + 1);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
next_part:
|
|
|
|
/* can be used for verification */
|
|
|
|
map->m_llen = offset + cur - map->m_la;
|
|
|
|
|
2018-08-05 23:21:01 +08:00
|
|
|
end = cur;
|
|
|
|
if (end > 0)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
goto repeat;
|
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
out:
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
z_erofs_onlinepage_endio(page);
|
|
|
|
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_dbg("%s, finish page: %pK spiltted: %u map->m_llen %llu",
|
|
|
|
__func__, page, spiltted, map->m_llen);
|
2018-09-18 22:27:25 +08:00
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-09-18 22:27:25 +08:00
|
|
|
/* if some error occurred while processing this page */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
err_out:
|
2018-09-18 22:27:25 +08:00
|
|
|
SetPageError(page);
|
|
|
|
goto out;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void z_erofs_vle_unzip_kickoff(void *ptr, int bios)
|
|
|
|
{
|
|
|
|
tagptr1_t t = tagptr_init(tagptr1_t, ptr);
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io *io = tagptr_unfold_ptr(t);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
bool background = tagptr_unfold_tags(t);
|
|
|
|
|
2018-12-08 00:19:12 +08:00
|
|
|
if (!background) {
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&io->u.wait.lock, flags);
|
|
|
|
if (!atomic_add_return(bios, &io->pending_bios))
|
|
|
|
wake_up_locked(&io->u.wait);
|
|
|
|
spin_unlock_irqrestore(&io->u.wait.lock, flags);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return;
|
2018-12-08 00:19:12 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:12 +08:00
|
|
|
if (!atomic_add_return(bios, &io->pending_bios))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
queue_work(z_erofs_workqueue, &io->u.work);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void z_erofs_vle_read_endio(struct bio *bio)
|
|
|
|
{
|
2019-03-25 11:40:08 +08:00
|
|
|
struct erofs_sb_info *sbi = NULL;
|
2019-03-25 11:40:09 +08:00
|
|
|
blk_status_t err = bio->bi_status;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct bio_vec *bvec;
|
2019-02-15 19:13:19 +08:00
|
|
|
struct bvec_iter_all iter_all;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-04-25 15:03:00 +08:00
|
|
|
bio_for_each_segment_all(bvec, bio, iter_all) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page *page = bvec->bv_page;
|
2018-07-26 20:22:07 +08:00
|
|
|
bool cachemngd = false;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
DBG_BUGON(PageUptodate(page));
|
2018-12-11 15:17:49 +08:00
|
|
|
DBG_BUGON(!page->mapping);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-09-04 10:09:06 +08:00
|
|
|
if (!sbi && !z_erofs_page_is_staging(page))
|
2019-03-25 11:40:08 +08:00
|
|
|
sbi = EROFS_SB(page->mapping->host->i_sb);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-03-25 11:40:08 +08:00
|
|
|
/* sbi should already be gotten if the page is managed */
|
|
|
|
if (sbi)
|
|
|
|
cachemngd = erofs_page_is_managed(sbi, page);
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
SetPageError(page);
|
2018-07-26 20:22:07 +08:00
|
|
|
else if (cachemngd)
|
|
|
|
SetPageUptodate(page);
|
|
|
|
|
|
|
|
if (cachemngd)
|
|
|
|
unlock_page(page);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
z_erofs_vle_unzip_kickoff(bio->bi_private, -1);
|
|
|
|
bio_put(bio);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static int z_erofs_decompress_pcluster(struct super_block *sb,
|
|
|
|
struct z_erofs_pcluster *pcl,
|
|
|
|
struct list_head *pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
struct erofs_sb_info *const sbi = EROFS_SB(sb);
|
2019-07-31 23:57:47 +08:00
|
|
|
const unsigned int clusterpages = BIT(pcl->clusterbits);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct z_erofs_pagevec_ctor ctor;
|
2019-07-31 23:57:47 +08:00
|
|
|
unsigned int i, outputsize, llen, nr_pages;
|
|
|
|
struct page *pages_onstack[Z_EROFS_VMAP_ONSTACK_PAGES];
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page **pages, **compressed_pages, *page;
|
|
|
|
|
|
|
|
enum z_erofs_page_type page_type;
|
2019-06-24 15:22:58 +08:00
|
|
|
bool overlapped, partial;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_collection *cl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
int err;
|
|
|
|
|
|
|
|
might_sleep();
|
2019-07-31 23:57:47 +08:00
|
|
|
cl = z_erofs_primarycollection(pcl);
|
|
|
|
DBG_BUGON(!READ_ONCE(cl->nr_pages));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
mutex_lock(&cl->lock);
|
|
|
|
nr_pages = cl->nr_pages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (nr_pages <= Z_EROFS_VMAP_ONSTACK_PAGES) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages = pages_onstack;
|
2019-07-31 23:57:47 +08:00
|
|
|
} else if (nr_pages <= Z_EROFS_VMAP_GLOBAL_PAGES &&
|
|
|
|
mutex_trylock(&z_pagemap_global_lock)) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages = z_pagemap_global;
|
2019-07-31 23:57:47 +08:00
|
|
|
} else {
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_t gfp_flags = GFP_KERNEL;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (nr_pages > Z_EROFS_VMAP_GLOBAL_PAGES)
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_flags |= __GFP_NOFAIL;
|
|
|
|
|
2019-03-19 07:58:41 +08:00
|
|
|
pages = kvmalloc_array(nr_pages, sizeof(struct page *),
|
2019-07-16 17:44:22 +08:00
|
|
|
gfp_flags);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* fallback to global pagemap for the lowmem scenario */
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!pages) {
|
2019-07-16 17:44:22 +08:00
|
|
|
mutex_lock(&z_pagemap_global_lock);
|
|
|
|
pages = z_pagemap_global;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < nr_pages; ++i)
|
|
|
|
pages[i] = NULL;
|
|
|
|
|
2019-08-21 22:01:52 +08:00
|
|
|
err = 0;
|
2019-06-24 15:22:53 +08:00
|
|
|
z_erofs_pagevec_ctor_init(&ctor, Z_EROFS_NR_INLINE_PAGEVECS,
|
2019-07-31 23:57:47 +08:00
|
|
|
cl->pagevec, 0);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
for (i = 0; i < cl->vcnt; ++i) {
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int pagenr;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:45 +08:00
|
|
|
page = z_erofs_pagevec_dequeue(&ctor, &page_type);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* all pages in pagevec ought to be valid */
|
2018-11-13 04:43:57 +08:00
|
|
|
DBG_BUGON(!page);
|
|
|
|
DBG_BUGON(!page->mapping);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (z_erofs_put_stagingpage(pagepool, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
if (page_type == Z_EROFS_VLE_PAGE_TYPE_HEAD)
|
|
|
|
pagenr = 0;
|
|
|
|
else
|
|
|
|
pagenr = z_erofs_onlinepage_index(page);
|
|
|
|
|
2018-12-11 15:17:49 +08:00
|
|
|
DBG_BUGON(pagenr >= nr_pages);
|
2018-09-19 13:49:07 +08:00
|
|
|
|
2019-08-21 22:01:52 +08:00
|
|
|
/*
|
|
|
|
* currently EROFS doesn't support multiref(dedup),
|
|
|
|
* so here erroring out one multiref page.
|
|
|
|
*/
|
2019-08-30 00:38:27 +08:00
|
|
|
if (pages[pagenr]) {
|
2019-08-21 22:01:52 +08:00
|
|
|
DBG_BUGON(1);
|
|
|
|
SetPageError(pages[pagenr]);
|
|
|
|
z_erofs_onlinepage_endio(pages[pagenr]);
|
|
|
|
err = -EFSCORRUPTED;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pages[pagenr] = page;
|
|
|
|
}
|
|
|
|
z_erofs_pagevec_ctor_exit(&ctor, true);
|
|
|
|
|
|
|
|
overlapped = false;
|
2019-07-31 23:57:47 +08:00
|
|
|
compressed_pages = pcl->compressed_pages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
for (i = 0; i < clusterpages; ++i) {
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int pagenr;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
page = compressed_pages[i];
|
|
|
|
|
|
|
|
/* all compressed pages ought to be valid */
|
2018-11-13 04:43:57 +08:00
|
|
|
DBG_BUGON(!page);
|
|
|
|
DBG_BUGON(!page->mapping);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-06-24 15:22:54 +08:00
|
|
|
if (!z_erofs_page_is_staging(page)) {
|
2019-03-25 11:40:08 +08:00
|
|
|
if (erofs_page_is_managed(sbi, page)) {
|
2019-08-30 00:38:27 +08:00
|
|
|
if (!PageUptodate(page))
|
2019-03-25 11:40:07 +08:00
|
|
|
err = -EIO;
|
|
|
|
continue;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
/*
|
|
|
|
* only if non-head page can be selected
|
|
|
|
* for inplace decompression
|
|
|
|
*/
|
|
|
|
pagenr = z_erofs_onlinepage_index(page);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
DBG_BUGON(pagenr >= nr_pages);
|
2019-08-30 00:38:27 +08:00
|
|
|
if (pages[pagenr]) {
|
2019-08-21 22:01:52 +08:00
|
|
|
DBG_BUGON(1);
|
|
|
|
SetPageError(pages[pagenr]);
|
|
|
|
z_erofs_onlinepage_endio(pages[pagenr]);
|
|
|
|
err = -EFSCORRUPTED;
|
|
|
|
}
|
2019-03-25 11:40:07 +08:00
|
|
|
pages[pagenr] = page;
|
|
|
|
|
|
|
|
overlapped = true;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
/* PG_error needs checking for inplaced and staging pages */
|
2019-08-30 00:38:27 +08:00
|
|
|
if (PageError(page)) {
|
2019-03-25 11:40:07 +08:00
|
|
|
DBG_BUGON(PageUptodate(page));
|
|
|
|
err = -EIO;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err)
|
2019-03-25 11:40:07 +08:00
|
|
|
goto out;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
llen = pcl->length >> Z_EROFS_PCLUSTER_LENGTH_BIT;
|
|
|
|
if (nr_pages << PAGE_SHIFT >= cl->pageofs + llen) {
|
|
|
|
outputsize = llen;
|
|
|
|
partial = !(pcl->length & Z_EROFS_PCLUSTER_FULL_LENGTH);
|
2019-06-24 15:22:58 +08:00
|
|
|
} else {
|
2019-07-31 23:57:47 +08:00
|
|
|
outputsize = (nr_pages << PAGE_SHIFT) - cl->pageofs;
|
2019-06-24 15:22:58 +08:00
|
|
|
partial = true;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-06-24 15:22:57 +08:00
|
|
|
err = z_erofs_decompress(&(struct z_erofs_decompress_req) {
|
|
|
|
.sb = sb,
|
|
|
|
.in = compressed_pages,
|
|
|
|
.out = pages,
|
2019-07-31 23:57:47 +08:00
|
|
|
.pageofs_out = cl->pageofs,
|
2019-06-24 15:22:57 +08:00
|
|
|
.inputsize = PAGE_SIZE,
|
|
|
|
.outputsize = outputsize,
|
2019-07-31 23:57:47 +08:00
|
|
|
.alg = pcl->algorithmformat,
|
2019-06-24 15:22:57 +08:00
|
|
|
.inplace_io = overlapped,
|
2019-06-24 15:22:58 +08:00
|
|
|
.partial_decoding = partial
|
2019-07-31 23:57:47 +08:00
|
|
|
}, pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
out:
|
2019-02-27 13:33:30 +08:00
|
|
|
/* must handle all compressed pages before endding pages */
|
|
|
|
for (i = 0; i < clusterpages; ++i) {
|
|
|
|
page = compressed_pages[i];
|
|
|
|
|
2019-03-25 11:40:08 +08:00
|
|
|
if (erofs_page_is_managed(sbi, page))
|
2019-02-27 13:33:30 +08:00
|
|
|
continue;
|
2019-03-25 11:40:08 +08:00
|
|
|
|
2019-02-27 13:33:30 +08:00
|
|
|
/* recycle all individual staging pages */
|
2019-07-31 23:57:47 +08:00
|
|
|
(void)z_erofs_put_stagingpage(pagepool, page);
|
2019-02-27 13:33:30 +08:00
|
|
|
|
|
|
|
WRITE_ONCE(compressed_pages[i], NULL);
|
|
|
|
}
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
for (i = 0; i < nr_pages; ++i) {
|
|
|
|
page = pages[i];
|
2019-02-27 13:33:30 +08:00
|
|
|
if (!page)
|
|
|
|
continue;
|
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
DBG_BUGON(!page->mapping);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* recycle all individual staging pages */
|
2019-07-31 23:57:47 +08:00
|
|
|
if (z_erofs_put_stagingpage(pagepool, page))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
continue;
|
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (err < 0)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
SetPageError(page);
|
|
|
|
|
|
|
|
z_erofs_onlinepage_endio(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (pages == z_pagemap_global)
|
|
|
|
mutex_unlock(&z_pagemap_global_lock);
|
2019-08-30 00:38:27 +08:00
|
|
|
else if (pages != pages_onstack)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
kvfree(pages);
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
cl->nr_pages = 0;
|
|
|
|
cl->vcnt = 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* all cl locks MUST be taken before the following line */
|
|
|
|
WRITE_ONCE(pcl->next, Z_EROFS_PCLUSTER_NIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* all cl locks SHOULD be released right now */
|
|
|
|
mutex_unlock(&cl->lock);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_collection_put(cl);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void z_erofs_vle_unzip_all(struct super_block *sb,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io *io,
|
|
|
|
struct list_head *pagepool)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t owned = io->head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
while (owned != Z_EROFS_PCLUSTER_TAIL_CLOSED) {
|
|
|
|
struct z_erofs_pcluster *pcl;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* no possible that 'owned' equals Z_EROFS_WORK_TPTR_TAIL */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned == Z_EROFS_PCLUSTER_TAIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* no possible that 'owned' equals NULL */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned == Z_EROFS_PCLUSTER_NIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
pcl = container_of(owned, struct z_erofs_pcluster, next);
|
|
|
|
owned = READ_ONCE(pcl->next);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_decompress_pcluster(sb, pcl, pagepool);
|
2018-08-06 11:27:53 +08:00
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void z_erofs_vle_unzip_wq(struct work_struct *work)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io_sb *iosb =
|
|
|
|
container_of(work, struct z_erofs_unzip_io_sb, io.u.work);
|
|
|
|
LIST_HEAD(pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(iosb->io.head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
z_erofs_vle_unzip_all(iosb->sb, &iosb->io, &pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
put_pages_list(&pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
kvfree(iosb);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct page *pickup_page_for_submission(struct z_erofs_pcluster *pcl,
|
|
|
|
unsigned int nr,
|
|
|
|
struct list_head *pagepool,
|
|
|
|
struct address_space *mc,
|
|
|
|
gfp_t gfp)
|
2018-12-08 00:19:15 +08:00
|
|
|
{
|
|
|
|
/* determined at compile time to avoid too many #ifdefs */
|
|
|
|
const bool nocache = __builtin_constant_p(mc) ? !mc : false;
|
2019-07-31 23:57:47 +08:00
|
|
|
const pgoff_t index = pcl->obj.index;
|
2018-12-08 00:19:15 +08:00
|
|
|
bool tocache = false;
|
|
|
|
|
|
|
|
struct address_space *mapping;
|
|
|
|
struct page *oldpage, *page;
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
compressed_page_t t;
|
|
|
|
int justfound;
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
repeat:
|
2019-07-31 23:57:47 +08:00
|
|
|
page = READ_ONCE(pcl->compressed_pages[nr]);
|
2018-12-08 00:19:15 +08:00
|
|
|
oldpage = page;
|
|
|
|
|
|
|
|
if (!page)
|
|
|
|
goto out_allocpage;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* the cached page has not been allocated and
|
|
|
|
* an placeholder is out there, prepare it now.
|
|
|
|
*/
|
|
|
|
if (!nocache && page == PAGE_UNALLOCATED) {
|
|
|
|
tocache = true;
|
|
|
|
goto out_allocpage;
|
|
|
|
}
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
/* process the target tagged pointer */
|
|
|
|
t = tagptr_init(compressed_page_t, page);
|
|
|
|
justfound = tagptr_unfold_tags(t);
|
|
|
|
page = tagptr_unfold_ptr(t);
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
mapping = READ_ONCE(page->mapping);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* if managed cache is disabled, it's no way to
|
|
|
|
* get such a cached-like page.
|
|
|
|
*/
|
|
|
|
if (nocache) {
|
2018-12-08 00:19:16 +08:00
|
|
|
/* if managed cache is disabled, it is impossible `justfound' */
|
|
|
|
DBG_BUGON(justfound);
|
|
|
|
|
|
|
|
/* and it should be locked, not uptodate, and not truncated */
|
2018-12-08 00:19:15 +08:00
|
|
|
DBG_BUGON(!PageLocked(page));
|
|
|
|
DBG_BUGON(PageUptodate(page));
|
|
|
|
DBG_BUGON(!mapping);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* unmanaged (file) pages are all locked solidly,
|
|
|
|
* therefore it is impossible for `mapping' to be NULL.
|
|
|
|
*/
|
|
|
|
if (mapping && mapping != mc)
|
|
|
|
/* ought to be unmanaged pages */
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
lock_page(page);
|
|
|
|
|
2018-12-08 00:19:16 +08:00
|
|
|
/* only true if page reclaim goes wrong, should never happen */
|
|
|
|
DBG_BUGON(justfound && PagePrivate(page));
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
/* the page is still in manage cache */
|
|
|
|
if (page->mapping == mc) {
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(pcl->compressed_pages[nr], page);
|
2018-12-08 00:19:15 +08:00
|
|
|
|
2019-03-25 11:40:07 +08:00
|
|
|
ClearPageError(page);
|
2018-12-08 00:19:15 +08:00
|
|
|
if (!PagePrivate(page)) {
|
2018-12-08 00:19:16 +08:00
|
|
|
/*
|
|
|
|
* impossible to be !PagePrivate(page) for
|
|
|
|
* the current restriction as well if
|
|
|
|
* the page is already in compressed_pages[].
|
|
|
|
*/
|
|
|
|
DBG_BUGON(!justfound);
|
|
|
|
|
|
|
|
justfound = 0;
|
2019-07-31 23:57:47 +08:00
|
|
|
set_page_private(page, (unsigned long)pcl);
|
2018-12-08 00:19:15 +08:00
|
|
|
SetPagePrivate(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* no need to submit io if it is already up-to-date */
|
|
|
|
if (PageUptodate(page)) {
|
|
|
|
unlock_page(page);
|
|
|
|
page = NULL;
|
|
|
|
}
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* the managed page has been truncated, it's unsafe to
|
|
|
|
* reuse this one, let's allocate a new cache-managed page.
|
|
|
|
*/
|
|
|
|
DBG_BUGON(page->mapping);
|
2018-12-08 00:19:16 +08:00
|
|
|
DBG_BUGON(!justfound);
|
2018-12-08 00:19:15 +08:00
|
|
|
|
|
|
|
tocache = true;
|
|
|
|
unlock_page(page);
|
|
|
|
put_page(page);
|
|
|
|
out_allocpage:
|
|
|
|
page = __stagingpage_alloc(pagepool, gfp);
|
2019-07-31 23:57:47 +08:00
|
|
|
if (oldpage != cmpxchg(&pcl->compressed_pages[nr], oldpage, page)) {
|
2018-12-08 00:19:15 +08:00
|
|
|
list_add(&page->lru, pagepool);
|
|
|
|
cpu_relax();
|
|
|
|
goto repeat;
|
|
|
|
}
|
|
|
|
if (nocache || !tocache)
|
|
|
|
goto out;
|
|
|
|
if (add_to_page_cache_lru(page, mc, index + nr, gfp)) {
|
|
|
|
page->mapping = Z_EROFS_MAPPING_STAGING;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
set_page_private(page, (unsigned long)pcl);
|
2018-12-08 00:19:15 +08:00
|
|
|
SetPagePrivate(page);
|
|
|
|
out: /* the only exit (for tracing and debugging) */
|
|
|
|
return page;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static struct z_erofs_unzip_io *jobqueue_init(struct super_block *sb,
|
|
|
|
struct z_erofs_unzip_io *io,
|
|
|
|
bool foreground)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io_sb *iosb;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:18 +08:00
|
|
|
if (foreground) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* waitqueue available for foreground io */
|
2018-12-08 00:19:18 +08:00
|
|
|
DBG_BUGON(!io);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
init_waitqueue_head(&io->u.wait);
|
|
|
|
atomic_set(&io->pending_bios, 0);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-06-27 13:31:18 +08:00
|
|
|
iosb = kvzalloc(sizeof(*iosb), GFP_KERNEL | __GFP_NOFAIL);
|
2018-12-08 00:19:18 +08:00
|
|
|
DBG_BUGON(!iosb);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:18 +08:00
|
|
|
/* initialize fields in the allocated descriptor */
|
|
|
|
io = &iosb->io;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
iosb->sb = sb;
|
|
|
|
INIT_WORK(&io->u.work, z_erofs_vle_unzip_wq);
|
|
|
|
out:
|
2019-07-31 23:57:47 +08:00
|
|
|
io->head = Z_EROFS_PCLUSTER_TAIL_CLOSED;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return io;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* define decompression jobqueue types */
|
2018-12-08 00:19:18 +08:00
|
|
|
enum {
|
|
|
|
JQ_BYPASS,
|
|
|
|
JQ_SUBMIT,
|
|
|
|
NR_JOBQUEUES,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void *jobqueueset_init(struct super_block *sb,
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t qtail[],
|
|
|
|
struct z_erofs_unzip_io *q[],
|
|
|
|
struct z_erofs_unzip_io *fgq,
|
2018-12-08 00:19:18 +08:00
|
|
|
bool forcefg)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* if managed cache is enabled, bypass jobqueue is needed,
|
2019-07-31 23:57:47 +08:00
|
|
|
* no need to read from device for all pclusters in this queue.
|
2018-12-08 00:19:18 +08:00
|
|
|
*/
|
|
|
|
q[JQ_BYPASS] = jobqueue_init(sb, fgq + JQ_BYPASS, true);
|
|
|
|
qtail[JQ_BYPASS] = &q[JQ_BYPASS]->head;
|
|
|
|
|
|
|
|
q[JQ_SUBMIT] = jobqueue_init(sb, fgq + JQ_SUBMIT, forcefg);
|
|
|
|
qtail[JQ_SUBMIT] = &q[JQ_SUBMIT]->head;
|
|
|
|
|
|
|
|
return tagptr_cast_ptr(tagptr_fold(tagptr1_t, q[JQ_SUBMIT], !forcefg));
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void move_to_bypass_jobqueue(struct z_erofs_pcluster *pcl,
|
|
|
|
z_erofs_next_pcluster_t qtail[],
|
|
|
|
z_erofs_next_pcluster_t owned_head)
|
2018-12-08 00:19:18 +08:00
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t *const submit_qtail = qtail[JQ_SUBMIT];
|
|
|
|
z_erofs_next_pcluster_t *const bypass_qtail = qtail[JQ_BYPASS];
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
if (owned_head == Z_EROFS_PCLUSTER_TAIL)
|
|
|
|
owned_head = Z_EROFS_PCLUSTER_TAIL_CLOSED;
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(pcl->next, Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
2018-12-08 00:19:18 +08:00
|
|
|
|
|
|
|
WRITE_ONCE(*submit_qtail, owned_head);
|
2019-07-31 23:57:47 +08:00
|
|
|
WRITE_ONCE(*bypass_qtail, &pcl->next);
|
2018-12-08 00:19:18 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
qtail[JQ_BYPASS] = &pcl->next;
|
2018-12-08 00:19:18 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static bool postsubmit_is_all_bypassed(struct z_erofs_unzip_io *q[],
|
2018-12-08 00:19:18 +08:00
|
|
|
unsigned int nr_bios,
|
|
|
|
bool force_fg)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* although background is preferred, no one is pending for submission.
|
|
|
|
* don't issue workqueue for decompression but drop it directly instead.
|
|
|
|
*/
|
|
|
|
if (force_fg || nr_bios)
|
|
|
|
return false;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
kvfree(container_of(q[JQ_SUBMIT], struct z_erofs_unzip_io_sb, io));
|
2018-12-08 00:19:18 +08:00
|
|
|
return true;
|
|
|
|
}
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
static bool z_erofs_vle_submit_all(struct super_block *sb,
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_next_pcluster_t owned_head,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct list_head *pagepool,
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io *fgq,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
bool force_fg)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct erofs_sb_info *const sbi __maybe_unused = EROFS_SB(sb);
|
|
|
|
z_erofs_next_pcluster_t qtail[NR_JOBQUEUES];
|
|
|
|
struct z_erofs_unzip_io *q[NR_JOBQUEUES];
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct bio *bio;
|
2018-12-08 00:19:18 +08:00
|
|
|
void *bi_private;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
/* since bio will be NULL, no need to initialize last_index */
|
|
|
|
pgoff_t uninitialized_var(last_index);
|
|
|
|
bool force_submit = false;
|
2018-09-11 03:41:14 +08:00
|
|
|
unsigned int nr_bios;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-30 00:38:27 +08:00
|
|
|
if (owned_head == Z_EROFS_PCLUSTER_TAIL)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return false;
|
|
|
|
|
|
|
|
force_submit = false;
|
|
|
|
bio = NULL;
|
2018-12-08 00:19:18 +08:00
|
|
|
nr_bios = 0;
|
|
|
|
bi_private = jobqueueset_init(sb, qtail, q, fgq, force_fg);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* by default, all need io submission */
|
2018-12-08 00:19:18 +08:00
|
|
|
q[JQ_SUBMIT]->head = owned_head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
do {
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_pcluster *pcl;
|
|
|
|
unsigned int clusterpages;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
pgoff_t first_index;
|
2018-12-08 00:19:15 +08:00
|
|
|
struct page *page;
|
|
|
|
unsigned int i = 0, bypass = 0;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
int err;
|
|
|
|
|
|
|
|
/* no possible 'owned_head' equals the following */
|
2019-07-31 23:57:47 +08:00
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
|
|
|
DBG_BUGON(owned_head == Z_EROFS_PCLUSTER_NIL);
|
|
|
|
|
|
|
|
pcl = container_of(owned_head, struct z_erofs_pcluster, next);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
clusterpages = BIT(pcl->clusterbits);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* close the main owned chain at first */
|
2019-07-31 23:57:47 +08:00
|
|
|
owned_head = cmpxchg(&pcl->next, Z_EROFS_PCLUSTER_TAIL,
|
|
|
|
Z_EROFS_PCLUSTER_TAIL_CLOSED);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
first_index = pcl->obj.index;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
force_submit |= (first_index != last_index + 1);
|
|
|
|
|
2018-12-08 00:19:15 +08:00
|
|
|
repeat:
|
2019-07-31 23:57:47 +08:00
|
|
|
page = pickup_page_for_submission(pcl, i, pagepool,
|
|
|
|
MNGD_MAPPING(sbi),
|
|
|
|
GFP_NOFS);
|
2018-12-08 00:19:15 +08:00
|
|
|
if (!page) {
|
|
|
|
force_submit = true;
|
|
|
|
++bypass;
|
|
|
|
goto skippage;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
if (bio && force_submit) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
submit_bio_retry:
|
2019-09-04 10:09:04 +08:00
|
|
|
submit_bio(bio);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
bio = NULL;
|
|
|
|
}
|
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
if (!bio) {
|
2019-09-04 10:09:02 +08:00
|
|
|
bio = bio_alloc(GFP_NOIO, BIO_MAX_PAGES);
|
|
|
|
|
|
|
|
bio->bi_end_io = z_erofs_vle_read_endio;
|
|
|
|
bio_set_dev(bio, sb->s_bdev);
|
|
|
|
bio->bi_iter.bi_sector = (sector_t)(first_index + i) <<
|
|
|
|
LOG_SECTORS_PER_BLOCK;
|
|
|
|
bio->bi_private = bi_private;
|
2019-09-04 10:09:04 +08:00
|
|
|
bio->bi_opf = REQ_OP_READ;
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
++nr_bios;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = bio_add_page(bio, page, PAGE_SIZE, 0);
|
|
|
|
if (err < PAGE_SIZE)
|
|
|
|
goto submit_bio_retry;
|
|
|
|
|
|
|
|
force_submit = false;
|
|
|
|
last_index = first_index + i;
|
2018-07-26 20:22:07 +08:00
|
|
|
skippage:
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
if (++i < clusterpages)
|
|
|
|
goto repeat;
|
2018-07-26 20:22:07 +08:00
|
|
|
|
2018-12-08 00:19:18 +08:00
|
|
|
if (bypass < clusterpages)
|
2019-07-31 23:57:47 +08:00
|
|
|
qtail[JQ_SUBMIT] = &pcl->next;
|
2018-12-08 00:19:18 +08:00
|
|
|
else
|
2019-07-31 23:57:47 +08:00
|
|
|
move_to_bypass_jobqueue(pcl, qtail, owned_head);
|
|
|
|
} while (owned_head != Z_EROFS_PCLUSTER_TAIL);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
if (bio)
|
2019-09-04 10:09:04 +08:00
|
|
|
submit_bio(bio);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:18 +08:00
|
|
|
if (postsubmit_is_all_bypassed(q, nr_bios, force_fg))
|
2018-07-26 20:22:07 +08:00
|
|
|
return true;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2018-12-08 00:19:18 +08:00
|
|
|
z_erofs_vle_unzip_kickoff(bi_private, nr_bios);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
static void z_erofs_submit_and_unzip(struct super_block *sb,
|
|
|
|
struct z_erofs_collector *clt,
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct list_head *pagepool,
|
|
|
|
bool force_fg)
|
|
|
|
{
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_unzip_io io[NR_JOBQUEUES];
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
if (!z_erofs_vle_submit_all(sb, clt->owned_head,
|
|
|
|
pagepool, io, force_fg))
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
return;
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
/* decompress no I/O pclusters immediately */
|
2018-12-08 00:19:18 +08:00
|
|
|
z_erofs_vle_unzip_all(sb, &io[JQ_BYPASS], pagepool);
|
2019-07-31 23:57:49 +08:00
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
if (!force_fg)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* wait until all bios are completed */
|
2018-12-08 00:19:18 +08:00
|
|
|
wait_event(io[JQ_SUBMIT].u.wait,
|
|
|
|
!atomic_read(&io[JQ_SUBMIT].pending_bios));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* let's synchronous decompression */
|
2018-12-08 00:19:18 +08:00
|
|
|
z_erofs_vle_unzip_all(sb, &io[JQ_SUBMIT], pagepool);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int z_erofs_vle_normalaccess_readpage(struct file *file,
|
|
|
|
struct page *page)
|
|
|
|
{
|
|
|
|
struct inode *const inode = page->mapping->host;
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_decompress_frontend f = DECOMPRESS_FRONTEND_INIT(inode);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
int err;
|
|
|
|
LIST_HEAD(pagepool);
|
|
|
|
|
2018-11-23 01:15:58 +08:00
|
|
|
trace_erofs_readpage(page, false);
|
|
|
|
|
2018-11-23 01:21:49 +08:00
|
|
|
f.headoffset = (erofs_off_t)page->index << PAGE_SHIFT;
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
err = z_erofs_do_read_page(&f, page, &pagepool);
|
2019-07-31 23:57:47 +08:00
|
|
|
(void)z_erofs_collector_end(&f.clt);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-08-19 18:34:21 +08:00
|
|
|
/* if some compressed cluster ready, need submit them anyway */
|
|
|
|
z_erofs_submit_and_unzip(inode->i_sb, &f.clt, &pagepool, true);
|
|
|
|
|
|
|
|
if (err)
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_err(inode->i_sb, "failed to read, err [%d]", err);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-01-15 09:42:21 +08:00
|
|
|
if (f.map.mpage)
|
|
|
|
put_page(f.map.mpage);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* clean up the remaining free pages */
|
|
|
|
put_pages_list(&pagepool);
|
2019-08-19 18:34:21 +08:00
|
|
|
return err;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:36 +08:00
|
|
|
static bool should_decompress_synchronously(struct erofs_sb_info *sbi,
|
|
|
|
unsigned int nr)
|
|
|
|
{
|
|
|
|
return nr <= sbi->max_sync_decompress_pages;
|
|
|
|
}
|
|
|
|
|
2018-09-20 00:06:56 +08:00
|
|
|
static int z_erofs_vle_normalaccess_readpages(struct file *filp,
|
|
|
|
struct address_space *mapping,
|
|
|
|
struct list_head *pages,
|
|
|
|
unsigned int nr_pages)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
{
|
|
|
|
struct inode *const inode = mapping->host;
|
2018-09-20 00:06:56 +08:00
|
|
|
struct erofs_sb_info *const sbi = EROFS_I_SB(inode);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:36 +08:00
|
|
|
bool sync = should_decompress_synchronously(sbi, nr_pages);
|
2019-07-31 23:57:47 +08:00
|
|
|
struct z_erofs_decompress_frontend f = DECOMPRESS_FRONTEND_INIT(inode);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
gfp_t gfp = mapping_gfp_constraint(mapping, GFP_KERNEL);
|
|
|
|
struct page *head = NULL;
|
|
|
|
LIST_HEAD(pagepool);
|
|
|
|
|
2018-09-18 22:27:27 +08:00
|
|
|
trace_erofs_readpages(mapping->host, lru_to_page(pages),
|
|
|
|
nr_pages, false);
|
|
|
|
|
2018-11-23 01:21:49 +08:00
|
|
|
f.headoffset = (erofs_off_t)lru_to_page(pages)->index << PAGE_SHIFT;
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
for (; nr_pages; --nr_pages) {
|
|
|
|
struct page *page = lru_to_page(pages);
|
|
|
|
|
|
|
|
prefetchw(&page->flags);
|
|
|
|
list_del(&page->lru);
|
|
|
|
|
2018-11-23 01:21:48 +08:00
|
|
|
/*
|
|
|
|
* A pure asynchronous readahead is indicated if
|
|
|
|
* a PG_readahead marked page is hitted at first.
|
|
|
|
* Let's also do asynchronous decompression for this case.
|
|
|
|
*/
|
|
|
|
sync &= !(PageReadahead(page) && !head);
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
if (add_to_page_cache_lru(page, mapping, page->index, gfp)) {
|
|
|
|
list_add(&page->lru, &pagepool);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_page_private(page, (unsigned long)head);
|
|
|
|
head = page;
|
|
|
|
}
|
|
|
|
|
2018-11-13 04:43:57 +08:00
|
|
|
while (head) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
struct page *page = head;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* traversal in reverse order */
|
|
|
|
head = (void *)page_private(page);
|
|
|
|
|
|
|
|
err = z_erofs_do_read_page(&f, page, &pagepool);
|
2019-09-04 10:08:56 +08:00
|
|
|
if (err)
|
2019-09-04 10:09:09 +08:00
|
|
|
erofs_err(inode->i_sb,
|
|
|
|
"readahead error at page %lu @ nid %llu",
|
|
|
|
page->index, EROFS_I(inode)->nid);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
put_page(page);
|
|
|
|
}
|
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
(void)z_erofs_collector_end(&f.clt);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-07-31 23:57:47 +08:00
|
|
|
z_erofs_submit_and_unzip(inode->i_sb, &f.clt, &pagepool, sync);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
2019-01-15 09:42:21 +08:00
|
|
|
if (f.map.mpage)
|
|
|
|
put_page(f.map.mpage);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 20:22:06 +08:00
|
|
|
|
|
|
|
/* clean up the remaining free pages */
|
|
|
|
put_pages_list(&pagepool);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
const struct address_space_operations z_erofs_vle_normalaccess_aops = {
|
|
|
|
.readpage = z_erofs_vle_normalaccess_readpage,
|
|
|
|
.readpages = z_erofs_vle_normalaccess_readpages,
|
|
|
|
};
|
2018-07-26 20:21:58 +08:00
|
|
|
|