hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/usb/host/ehci-hcd.c

1374 lines
38 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
USB: change maintainership of ohci-hcd and ehci-hcd Following the loss of David Brownell, I volunteer to maintain the ohci-hcd and ehci-hcd drivers. This patch (as1472) makes it official. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-16 04:32:46 +08:00
* Enhanced Host Controller Interface (EHCI) driver for USB.
*
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* Copyright (c) 2000-2004 by David Brownell
USB: EHCI whitespace fixes (cosmetic) [ ... when you have an editor set to remind you of whitespace bugs ... ] Cosmetic EHCI changes: remove end-of-line whitespace, spaces before tabs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-31 05:50:06 +08:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dmapool.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
USB: ehci-dbg: increase debug buffer size for periodic file This patch is based on the following ideas: 1. Some usb devices (such as usb video class) have endpoints of high interval attribute, so reading "periodic" file need more debug buffer to accommodate the qh or itd schedule information. For example, 4KB buffer is not enough for a single interrupt qh of 2ms period. 2. print a %p need 16 byte buffer on 64-bits arch, but 8 byte on 32-bits arch. Add a extra bonus for 64-bits arch. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-18 23:06:21 +08:00
#include <linux/vmalloc.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/errno.h>
#include <linux/init.h>
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
#include <linux/hrtimer.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
USB: make hcd.h public (drivers dependency) The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-25 05:21:52 +08:00
#include <linux/usb/hcd.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
USB: convert ehci debug files to use debugfs instead of sysfs We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-12 05:07:31 +08:00
#include <linux/debugfs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/unaligned.h>
usb: Fix PS3 EHCI suspend The EHCI USB controller of the Cell Super Companion Chip used in the PS3 will stop the root hub after all root hub ports are suspended. When in this condition the ehci-hcd handshake routine will return -ETIMEDOUT and the USB runtime suspend sequence will fail. The STS_HLT bit will not be set, so inspection of the frame index is used to test for the condition. Add a new routine handshake_for_broken_root_hub() that is called after an unsuccessful -ETIMEDOUT handshake. On PS3 handshake_for_broken_root_hub() will test for the condition, and if found will return success to allow the USB suspend to complete. For all other platforms handshake_for_broken_root_hub() will return -ETIMEDOUT Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-01 08:40:57 +08:00
#if defined(CONFIG_PPC_PS3)
#include <asm/firmware.h>
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------------------------------------------------------*/
/*
* EHCI hc_driver implementation ... experimental, incomplete.
* Based on the final 1.0 register interface specification.
*
* USB 2.0 shows up in upcoming www.pcmcia.org technology.
* First was PCMCIA, like ISA; then CardBus, which is PCI.
* Next comes "CardBay", using USB 2.0 signals.
*
* Contains additional contributions by Brad Hards, Rory Bolt, and others.
* Special thanks to Intel and VIA for providing host controllers to
* test this driver on, and Cypress (including In-System Design) for
* providing early devices for those host controllers to talk to!
*/
#define DRIVER_AUTHOR "David Brownell"
#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
static const char hcd_name [] = "ehci_hcd";
USB: ehci: minor cleanups Minor cleanups to the EHCI code: revision history is what source code repositories should have. Switch to a more standard way to kick in verbose debugging -- don't be EHCI-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02 03:42:05 +08:00
#undef VERBOSE_DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#undef EHCI_URB_TRACE
/* magic numbers that can affect system performance */
#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
#define EHCI_TUNE_RL_TT 0
#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
#define EHCI_TUNE_MULT_TT 1
USB: EHCI: add missing frame -> microframe conversion This patch (as1407) fixes a bug in ehci-hcd's isochronous scheduler. All its calculations should be done in terms of microframes, but for full-speed devices, sched->span is stored in frames. It needs to be converted. This fix is liable to expose problems in other drivers. The old code would accept URBs that should not have been accepted, so drivers have had no reason to avoid submitting URBs that exceeded the maximum schedule length. In an attempt to partially compensate for this, the patch also adjusts the schedule length from a minimum of 256 frames up to a minimum of 512 frames. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-14 23:03:46 +08:00
/*
* Some drivers think it's safe to schedule isochronous transfers more than
* 256 ms into the future (partly as a result of an old bug in the scheduling
* code). In an attempt to avoid trouble, we will use a minimum scheduling
* length of 512 frames instead of 256.
*/
#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Initial IRQ latency: faster than hw default */
static int log2_irq_thresh = 0; // 0 to 6
module_param (log2_irq_thresh, int, S_IRUGO);
MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
/* initial park setting: slower than hw default */
static unsigned park = 0;
module_param (park, uint, S_IRUGO);
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
USB: add ehci_hcd.ignore_oc parameter Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-17 15:34:58 +08:00
/* for flakey hardware, ignore overcurrent indicators */
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 07:02:20 +08:00
static bool ignore_oc = 0;
USB: add ehci_hcd.ignore_oc parameter Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-17 15:34:58 +08:00
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
/*-------------------------------------------------------------------------*/
#include "ehci.h"
USB host: Move AMD PLL quirk to pci-quirks.c This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-01 14:57:05 +08:00
#include "pci-quirks.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: make ehci_read_frame_index platform independent In preparation for splitting the ehci-hcd driver into a core library and separate platform-specific driver modules, this patch (as1617) changes the way ehci_read_frame_index() is handled. Since the same core library will have to work with both PCI and non-PCI platforms, the quirk handler routine will be compiled unconditionally. The decision about whether to call it or simply to read the frame index register is made at run time, based on whether the frame_index_bug quirk flag is set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-11 03:07:39 +08:00
/*
* The MosChip MCS9990 controller updates its microframe counter
* a little before the frame counter, and occasionally we will read
* the invalid intermediate value. Avoid problems by checking the
* microframe number (the low-order 3 bits); if they are 0 then
* re-read the register to get the correct value.
*/
static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
{
unsigned uf;
uf = ehci_readl(ehci, &ehci->regs->frame_index);
if (unlikely((uf & 7) == 0))
uf = ehci_readl(ehci, &ehci->regs->frame_index);
return uf;
}
static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
{
if (ehci->frame_index_bug)
return ehci_moschip_read_frame_index(ehci);
return ehci_readl(ehci, &ehci->regs->frame_index);
}
#include "ehci-dbg.c"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------------------------------------------------------*/
/*
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
* ehci_handshake - spin reading hc until handshake completes or fails
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* @ptr: address of hc register to be read
* @mask: bits to look at in result of read
* @done: value of those bits when handshake succeeds
* @usec: timeout in microseconds
*
* Returns negative errno, or zero on success
*
* Success happens when the "mask" bits have the specified value (hardware
* handshake done). There are two failure modes: "usec" have passed (major
* hardware flakeout), or the register reads as all-ones (hardware removed).
*
* That last failure should_only happen in cases like physical cardbus eject
* before driver shutdown. But it also seems to be caused by bugs in cardbus
* bridge shutdown: shutting down the bridge before the devices using it.
*/
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
u32 mask, u32 done, int usec)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 result;
do {
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
result = ehci_readl(ehci, ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (result == ~(u32)0) /* card removed */
return -ENODEV;
result &= mask;
if (result == done)
return 0;
udelay (1);
usec--;
} while (usec > 0);
return -ETIMEDOUT;
}
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
EXPORT_SYMBOL_GPL(ehci_handshake);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: ehci tdi : let's tdi_reset set host mode tdi_reset is already taking care of setting host mode for tdi devices. Don't duplicate code in platform driver. Make ehci_halt a nop if the controller is not in host mode (otherwise it will fail), and let's ehci_reset do the tdi_reset. We need to move hcd->has_tt flags before ehci_halt, in order ehci_halt knows we are a tdi device. Before the setup routine was doing : - put controller in host mode - ehci_halt - ehci_init - hcd->has_tt = 1; - ehci_reset Now we do : - hcd->has_tt = 1; - ehci_halt - ehci_init - ehci_reset PS : now we handle correctly the device -> host transition. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-07 00:26:56 +08:00
/* check TDI/ARC silicon is in host mode */
static int tdi_in_host_mode (struct ehci_hcd *ehci)
{
u32 tmp;
USB: EHCI: define extension registers like normal ones This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 00:19:03 +08:00
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
USB: ehci tdi : let's tdi_reset set host mode tdi_reset is already taking care of setting host mode for tdi devices. Don't duplicate code in platform driver. Make ehci_halt a nop if the controller is not in host mode (otherwise it will fail), and let's ehci_reset do the tdi_reset. We need to move hcd->has_tt flags before ehci_halt, in order ehci_halt knows we are a tdi device. Before the setup routine was doing : - put controller in host mode - ehci_halt - ehci_init - hcd->has_tt = 1; - ehci_reset Now we do : - hcd->has_tt = 1; - ehci_halt - ehci_init - ehci_reset PS : now we handle correctly the device -> host transition. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-07 00:26:56 +08:00
return (tmp & 3) == USBMODE_CM_HC;
}
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
/*
* Force HC to halt state from unknown (EHCI spec section 2.3).
* Must be called with interrupts enabled and the lock not held.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int ehci_halt (struct ehci_hcd *ehci)
{
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
u32 temp;
spin_lock_irq(&ehci->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] USB: ehci.patch (earlier irq disable) This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+)
2005-09-28 01:19:39 +08:00
/* disable any irqs left enabled by previous code */
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
[PATCH] USB: ehci.patch (earlier irq disable) This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+)
2005-09-28 01:19:39 +08:00
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) {
spin_unlock_irq(&ehci->lock);
USB: ehci tdi : let's tdi_reset set host mode tdi_reset is already taking care of setting host mode for tdi devices. Don't duplicate code in platform driver. Make ehci_halt a nop if the controller is not in host mode (otherwise it will fail), and let's ehci_reset do the tdi_reset. We need to move hcd->has_tt flags before ehci_halt, in order ehci_halt knows we are a tdi device. Before the setup routine was doing : - put controller in host mode - ehci_halt - ehci_init - hcd->has_tt = 1; - ehci_reset Now we do : - hcd->has_tt = 1; - ehci_halt - ehci_init - ehci_reset PS : now we handle correctly the device -> host transition. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-07 00:26:56 +08:00
return 0;
}
EHCI: maintain the ehci->command value properly The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24 01:54:36 +08:00
/*
* This routine gets called during probe before ehci->command
* has been initialized, so we can't rely on its value.
*/
ehci->command &= ~CMD_RUN;
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
temp = ehci_readl(ehci, &ehci->regs->command);
EHCI: maintain the ehci->command value properly The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24 01:54:36 +08:00
temp &= ~(CMD_RUN | CMD_IAAD);
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, temp, &ehci->regs->command);
usb: Fix PS3 EHCI suspend The EHCI USB controller of the Cell Super Companion Chip used in the PS3 will stop the root hub after all root hub ports are suspended. When in this condition the ehci-hcd handshake routine will return -ETIMEDOUT and the USB runtime suspend sequence will fail. The STS_HLT bit will not be set, so inspection of the frame index is used to test for the condition. Add a new routine handshake_for_broken_root_hub() that is called after an unsuccessful -ETIMEDOUT handshake. On PS3 handshake_for_broken_root_hub() will test for the condition, and if found will return success to allow the USB suspend to complete. For all other platforms handshake_for_broken_root_hub() will return -ETIMEDOUT Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
2011-12-01 08:40:57 +08:00
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_unlock_irq(&ehci->lock);
synchronize_irq(ehci_to_hcd(ehci)->irq);
USB: ehci: fix some ehci hangs and crashes I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT" patch from earlier this year perpetuated a potential problem: it can mark the controller as halted when it's still running (but not acting as, perhaps wrongly, expected). That caused some hangs and crashes, rather than more polite failure modes of a truly halted controller. This patch forces a true halt, and emits a (previously missing) diagnostic. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-27 05:43:46 +08:00
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
return ehci_handshake(ehci, &ehci->regs->status,
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
STS_HALT, STS_HALT, 16 * 125);
USB: ehci: fix some ehci hangs and crashes I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT" patch from earlier this year perpetuated a potential problem: it can mark the controller as halted when it's still running (but not acting as, perhaps wrongly, expected). That caused some hangs and crashes, rather than more polite failure modes of a truly halted controller. This patch forces a true halt, and emits a (previously missing) diagnostic. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-27 05:43:46 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* put TDI/ARC silicon into EHCI mode */
static void tdi_reset (struct ehci_hcd *ehci)
{
u32 tmp;
USB: EHCI: define extension registers like normal ones This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 00:19:03 +08:00
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
USB: EHCI: Safe endianness for transfer buffers after reset in case of HUB with TT This patch fixes the endianness select for transfer buffers in EHCI controllers that have Transaction Translator built in the hub. Also I cleaned it up to make rid of magic numbers. Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> Cc: <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-24 00:07:48 +08:00
tmp |= USBMODE_CM_HC;
/* The default byte access to MMR space is LE after
* controller reset. Set the required endian mode
* for transfer buffers to match the host microprocessor
*/
if (ehci_big_endian_mmio(ehci))
tmp |= USBMODE_BE;
USB: EHCI: define extension registers like normal ones This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 00:19:03 +08:00
ehci_writel(ehci, tmp, &ehci->regs->usbmode);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
/*
* Reset a non-running (STS_HALT == 1) controller.
* Must be called with interrupts enabled and the lock not held.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int ehci_reset (struct ehci_hcd *ehci)
{
int retval;
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
u32 command = ehci_readl(ehci, &ehci->regs->command);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-21 04:39:54 +08:00
/* If the EHCI debug controller is active, special care must be
* taken before and after a host controller reset */
USB EHCI/Xen: propagate controller reset information to hypervisor Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18 19:23:02 +08:00
if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci)))
USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-21 04:39:54 +08:00
ehci->debug = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
command |= CMD_RESET;
dbg_cmd (ehci, "reset", command);
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, command, &ehci->regs->command);
USB: EHCI: remove usages of hcd->state This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 04:31:30 +08:00
ehci->rh_state = EHCI_RH_HALTED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ehci->next_statechange = jiffies;
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
retval = ehci_handshake(ehci, &ehci->regs->command,
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
CMD_RESET, 0, 250 * 1000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and support phy low power mode The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 12:41:20 +08:00
if (ehci->has_hostpc) {
ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
USB: EHCI: define extension registers like normal ones This patch (as1562) cleans up the definitions of the EHCI extended registers to be consistent with the definitions of the standard registers. This makes the code look a lot nicer, with no functional change. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-26 00:19:03 +08:00
&ehci->regs->usbmode_ex);
ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and support phy low power mode The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 12:41:20 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (retval)
return retval;
if (ehci_is_TDI(ehci))
tdi_reset (ehci);
USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-21 04:39:54 +08:00
if (ehci->debug)
USB EHCI/Xen: propagate controller reset information to hypervisor Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18 19:23:02 +08:00
dbgp_external_startup(ehci_to_hcd(ehci));
USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device If the EHCI debug port is initialized and in use, the EHCI host controller driver must follow two rules. 1) If the EHCI host driver issues a controller reset, the debug controller driver re-initialization must get called after the reset is completed. 2) The EHCI host driver should ignore any requests to the physical EHCI debug port when the EHCI debug port is in use. The code to check for the debug port was moved from ehci_pci_reinit() to ehci_pci_setup because it must get called prior to ehci_reset() which will clear the debug port registers. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: dbrownell@users.sourceforge.net Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-21 04:39:54 +08:00
EHCI: keep track of ports being resumed and indicate in hub_status_data This patch (as1537) adds a bit-array to ehci-hcd for keeping track of which ports are undergoing a resume transition. If any of the bits are set when ehci_hub_status_data() is called, the routine will return a nonzero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Chen Peter-B29397 <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-04 03:24:30 +08:00
ehci->port_c_suspend = ehci->suspended_ports =
ehci->resuming_ports = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return retval;
}
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
/*
* Idle the controller (turn off the schedules).
* Must be called with interrupts enabled and the lock not held.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void ehci_quiesce (struct ehci_hcd *ehci)
{
u32 temp;
USB: EHCI: remove usages of hcd->state This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 04:31:30 +08:00
if (ehci->rh_state != EHCI_RH_RUNNING)
USB: EHCI: add new root-hub state: STOPPING This patch (as1571) adds a new state for ehci-hcd's root hubs: EHCI_RH_STOPPING. This value is used at times when the root hub is being stopped and we don't know whether or not the hardware has finished all its DMA yet. Although the purpose may not be apparent, this distinction will come in useful later on. Future patches will avoid actions that depend on the root hub being operational (like turning on the async or periodic schedules) when they see the state is EHCI_RH_STOPPING. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:48 +08:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* wait for any schedule enables/disables to take effect */
EHCI: maintain the ehci->command value properly The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24 01:54:36 +08:00
temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp,
16 * 125);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* then disable anything that's still active */
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_lock_irq(&ehci->lock);
EHCI: maintain the ehci->command value properly The ehci-hcd driver is a little haphazard about keeping track of the state of the USBCMD register. The ehci->command field is supposed to hold the register's value (apart from a few special bits) at all times, but it isn't maintained properly. This patch (as1543) cleans up the situation. It keeps ehci->command up-to-date, and uses that value rather than reading the register from the hardware whenever possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24 01:54:36 +08:00
ehci->command &= ~(CMD_ASE | CMD_PSE);
ehci_writel(ehci, ehci->command, &ehci->regs->command);
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_unlock_irq(&ehci->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* hardware can take 16 microframes to turn off ... */
USB: EHCI: export ehci_handshake for ehci-hcd sub-drivers In order to split ehci-hcd.c into separate modules, handshake() must be exported. Rename the symbol to add an ehci_ prefix, to avoid any naming clashes. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> [swarren, split Manjunath's patches more logically, limit this change to export just handshake()] Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-14 01:24:09 +08:00
ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0,
16 * 125);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*-------------------------------------------------------------------------*/
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
static void end_unlink_async(struct ehci_hcd *ehci);
USB: EHCI: use hrtimer for unlinking empty async QHs This patch (as1583) changes ehci-hcd to use an hrtimer event for unlinking empty (unused) async QHs instead of using a kernel timer. The check for empty QHs is moved to a new routine, where it doesn't require going through an entire scan of both the async and periodic schedules. And it can unlink multiple QHs at once, unlike the current code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:53 +08:00
static void unlink_empty_async(struct ehci_hcd *ehci);
USB: EHCI: fix regression during bus resume This patch (as1663) fixes a regression caused by commit 6e0c3339a6f19d748f16091d0a05adeb1e1f822b (USB: EHCI: unlink one async QH at a time). In order to avoid keeping multiple QHs in an unusable intermediate state, that commit changed unlink_empty_async() so that it unlinks only one empty QH at a time. However, when the EHCI root hub is suspended, _all_ async QHs need to be unlinked. ehci_bus_suspend() used to do this by calling unlink_empty_async(), but now this only unlinks one of the QHs, not all of them. The symptom is that when the root hub is resumed, USB communications don't work for some period of time. This is because ehci-hcd doesn't realize it needs to restart the async schedule; it assumes that because some QHs are already on the schedule, the schedule must be running. The easiest way to fix the problem is add a new function that unlinks all the async QHs when the root hub is suspended. This patch should be applied to all kernels that have the 6e0c3339a6f1 commit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Adrian Bassett <adrian.bassett@hotmail.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-16 02:40:26 +08:00
static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void ehci_work(struct ehci_hcd *ehci);
USB: EHCI: use hrtimer for interrupt QH unlink This patch (as1577) adds hrtimer support for unlinking interrupt QHs in ehci-hcd. The current code relies on a fixed delay of either 2 or 55 us, which is not always adequate and in any case is totally bogus. Thanks to internal caching, the EHCI hardware may continue to access an interrupt QH for more than a millisecond after it has been unlinked. In fact, the EHCI spec doesn't say how long to wait before using an unlinked interrupt QH. The patch sets the delay to 9 microframes minimum, which ought to be adequate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:26 +08:00
static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
#include "ehci-timer.c"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "ehci-hub.c"
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
USB: EHCI: Move sysfs related bits into ehci-sysfs.c The only sysfs attr implemented so far is "companion" from ehci-hub.c, but in the next patch we are going to add another sysfs file, so prior to that let's structure things and move already-in-there sysfs code to separate file. NOTE: All the code I'm moving into this new file was written by Alan Stern (in 57e06c11 "EHCI: force high-speed devices to run at full speed"; Jan 16 2007), that's why I'm putting Copyright (C) 2007 by Alan Stern there after explicit request from the author. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-04 00:36:56 +08:00
#include "ehci-sysfs.c"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------------------------------------------------------*/
EHCI: turn off remote wakeup during shutdown This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-14 03:55:27 +08:00
/* On some systems, leaving remote wakeup enabled prevents system shutdown.
* The firmware seems to think that powering off is a wakeup event!
* This routine turns off remote wakeup and everything else, on all ports.
*/
static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
{
int port = HCS_N_PORTS(ehci->hcs_params);
while (port--)
ehci_writel(ehci, PORT_RWC_BITS,
&ehci->regs->port_status[port]);
}
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
/*
* Halt HC, turn off all ports, and let the BIOS use the companion controllers.
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
* Must be called with interrupts enabled and the lock not held.
[PATCH] USB: ehci.patch (earlier irq disable) This tweaks the EHCI reboot notifier to also halt the EHCI controller, and makes that halt code force IRQs off. Both should always have been done. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 8 ++++++++ 1 file changed, 8 insertions(+)
2005-09-28 01:19:39 +08:00
*/
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
static void ehci_silence_controller(struct ehci_hcd *ehci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
ehci_halt(ehci);
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_lock_irq(&ehci->lock);
ehci->rh_state = EHCI_RH_HALTED;
EHCI: turn off remote wakeup during shutdown This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-14 03:55:27 +08:00
ehci_turn_off_all_ports(ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* make BIOS/etc use companion controller during reboot */
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
EHCI: turn off remote wakeup during shutdown This patch (as850b) disables remote wakeup (and everything else!) on all EHCI ports when the shutdown() method is called. If remote wakeup is left active then some systems will reboot instead of powering off. This fixes Bugzilla #7828. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-14 03:55:27 +08:00
/* unblock posted writes */
ehci_readl(ehci, &ehci->regs->configured_flag);
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_unlock_irq(&ehci->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
* This forcibly disables dma and IRQs, helping kexec and other cases
* where the next system software may expect clean state.
*/
static void ehci_shutdown(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
spin_lock_irq(&ehci->lock);
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
ehci->shutdown = true;
USB: EHCI: add new root-hub state: STOPPING This patch (as1571) adds a new state for ehci-hcd's root hubs: EHCI_RH_STOPPING. This value is used at times when the root hub is being stopped and we don't know whether or not the hardware has finished all its DMA yet. Although the purpose may not be apparent, this distinction will come in useful later on. Future patches will avoid actions that depend on the root hub being operational (like turning on the async or periodic schedules) when they see the state is EHCI_RH_STOPPING. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:48 +08:00
ehci->rh_state = EHCI_RH_STOPPING;
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
ehci->enabled_hrtimer_events = 0;
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
spin_unlock_irq(&ehci->lock);
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
ehci_silence_controller(ehci);
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
hrtimer_cancel(&ehci->hrtimer);
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
}
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
/*-------------------------------------------------------------------------*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
/*
* ehci_work is called from some interrupts, timers, and so on.
* it calls driver completion functions, after dropping ehci->lock.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void ehci_work (struct ehci_hcd *ehci)
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
{
/* another CPU may drop ehci->lock during a schedule scan while
* it reports urb completions. this flag guards against bogus
* attempts at re-entrant schedule scanning.
*/
USB: EHCI: don't lose events during a scan This patch (as1584) fixes a minor bug that has been present in ehci-hcd since the beginning. Scanning the schedules for URB completions is single-threaded. If a completion interrupt occurs while an URB is being given back, the interrupt handler realizes that a scan is in progress on another CPU and avoids starting a new one. This means that completion events can be lost. If an URB completes after it has been scanned but while a scan is still in progress, the driver won't notice and won't rescan the completed URB. The patch fixes the problem by adding a new flag to indicate that another scan is needed after the current scan is done. The flag gets set whenever a completion interrupt occurs while a scan is in progress. The rescan will see the completion, thus preventing it from getting lost. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:57 +08:00
if (ehci->scanning) {
ehci->need_rescan = true;
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
return;
USB: EHCI: don't lose events during a scan This patch (as1584) fixes a minor bug that has been present in ehci-hcd since the beginning. Scanning the schedules for URB completions is single-threaded. If a completion interrupt occurs while an URB is being given back, the interrupt handler realizes that a scan is in progress on another CPU and avoids starting a new one. This means that completion events can be lost. If an URB completes after it has been scanned but while a scan is still in progress, the driver won't notice and won't rescan the completed URB. The patch fixes the problem by adding a new flag to indicate that another scan is needed after the current scan is done. The flag gets set whenever a completion interrupt occurs while a scan is in progress. The rescan will see the completion, thus preventing it from getting lost. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:57 +08:00
}
ehci->scanning = true;
rescan:
ehci->need_rescan = false;
USB: EHCI: use hrtimer for async schedule This patch (as1576) adds hrtimer support for managing ehci-hcd's async schedule. Just as with the earlier change to the periodic schedule management, two new hrtimer events take care of everything. One event polls at 1-ms intervals to see when the Asynchronous Schedule Status (ASS) flag matches the Asynchronous Schedule Enable (ASE) value; the schedule's state must not be changed until it does. The other event delays for 15 ms after the async schedule becomes empty before turning it off. The new events replace a busy-wait poll and a kernel timer usage. They also replace the rather illogical method currently used for indicating the async schedule should be turned off: attempting to unlink the dedicated QH at the head of the async list. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:21 +08:00
if (ehci->async_count)
scan_async(ehci);
USB: EHCI: always scan each interrupt QH This patch (as1585) fixes a bug in ehci-hcd's scheme for scanning interrupt QHs. Currently a single routine takes care of scanning everything on the periodic schedule. Whenever an interrupt occurs, it scans all isochronous and interrupt URBs scheduled for frames that have elapsed since the last scan. This has two disadvantages. The first is relatively minor: An interrupt QH is likely to end up getting scanned multiple times, particularly if the last scan was not fairly recent. (The current code avoids this by maintaining a periodic_stamp in each interrupt QH.) The second is more serious. The periodic schedule wraps around. If the last scan occurred during frame N, and the next scan occurs when the schedule has gone through an entire cycle and is back at frame N, the scanning code won't look at any frames other than N. Consequently it won't see any QHs that completed during frame N-1 or earlier. The patch replaces the entire frame-based approach for scanning interrupt QHs with a new routine using a list-based approach, the same as for async QHs. This has a slight disadvantage, because it means that all interrupt QHs have to be scanned every time. But it is more robust than the current approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:00 +08:00
if (ehci->intr_count > 0)
scan_intr(ehci);
if (ehci->isoc_count > 0)
scan_isoc(ehci);
USB: EHCI: don't lose events during a scan This patch (as1584) fixes a minor bug that has been present in ehci-hcd since the beginning. Scanning the schedules for URB completions is single-threaded. If a completion interrupt occurs while an URB is being given back, the interrupt handler realizes that a scan is in progress on another CPU and avoids starting a new one. This means that completion events can be lost. If an URB completes after it has been scanned but while a scan is still in progress, the driver won't notice and won't rescan the completed URB. The patch fixes the problem by adding a new flag to indicate that another scan is needed after the current scan is done. The flag gets set whenever a completion interrupt occurs while a scan is in progress. The rescan will see the completion, thus preventing it from getting lost. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:57 +08:00
if (ehci->need_rescan)
goto rescan;
ehci->scanning = false;
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
/* the IO watchdog guards against hardware or driver bugs that
* misplace IRQs, and should let us run completely without IRQs.
* such lossage has been observed on both VT6202 and VT8235.
*/
USB: EHCI: use hrtimer for the I/O watchdog This patch (as1586) replaces the kernel timer used by ehci-hcd as an I/O watchdog with an hrtimer event. Unlike in the current code, the watchdog event is now always enabled whenever any isochronous URBs are active. This will prevent bugs caused by the periodic schedule wrapping around with no completion interrupts; the watchdog handler is guaranteed to scan the isochronous transfers at least once during each iteration of the schedule. The extra overhead will be negligible: one timer interrupt every 100 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:04 +08:00
turn_on_io_watchdog(ehci);
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
/*
* Called when the ehci_hcd module is removed.
*/
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
static void ehci_stop (struct usb_hcd *hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
ehci_dbg (ehci, "stop\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
/* no more interrupts ... */
[PATCH] USB: ehci power fixes Miscellaneous updates for EHCI. - Mostly updates the power switching on EHCI controllers. One routine centralizes the "power on/off all ports" logic, and the capability to do that is reported more correctly. - Courtesy Colin Leroy, a patch to always power up ports after resumes which didn't keep a USB device suspended. The reset-everything logic powers down those ports (on some hardware) so something needs to turn them back on. - Minor tweaks/bugfixes for the debug port support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-10 00:00:29 +08:00
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
spin_lock_irq(&ehci->lock);
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
ehci->enabled_hrtimer_events = 0;
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
spin_unlock_irq(&ehci->lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: fix up locking This patch (as1588) adjusts the locking in ehci-hcd's various halt, shutdown, and suspend/resume pathways. We want to hold the spinlock while writing device registers and accessing shared variables, but not while polling in a loop. In addition, there's no need to call ehci_work() at times when no URBs can be active, i.e., in ehci_stop() and ehci_bus_suspend(). Finally, ehci_adjust_port_wakeup_flags() is called only in situations where interrupts are enabled; therefore it can use spin_lock_irq rather than spin_lock_irqsave. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:10 +08:00
ehci_quiesce(ehci);
USB: ehci shutdown refactored This patch refactors some shutdown code so it can be shared between ehci_stop() and ehci_shutdown(). This also fixes a couple potential bugs: - ehci_shutdown() was not locking ehci->lock before halting the HC. - ehci_shutdown() didn't disable the watchdog and IAA timers. - ehci_stop() was resetting the host controller when it may have been running, which the EHCI spec says "may result in undefined behavior". ehci_stop() was calling port_power() to turn off the ports, which waited 20ms after applying the port change. The msleep was for the case where the HC might take 20ms to turn the ports on; since we're shutting them off, we can avoid the msleep and just use ehci_turn_off_ports(). ehci_stop() doesn't need to clear the intr_enable register or revert ownership of the companion controllers to the BIOS, because the host controller reset should have done that. There might be a buggy host controller that doesn't follow the reset rules, but for now we assume it's redundant code and remove it. [ A subsequent patch will cancel the timers later ... this version carries forward existing bugs where timers could get re-armed after they're canceled. ] Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-09 05:30:18 +08:00
ehci_silence_controller(ehci);
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
ehci_reset (ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
hrtimer_cancel(&ehci->hrtimer);
USB: EHCI: Move sysfs related bits into ehci-sysfs.c The only sysfs attr implemented so far is "companion" from ehci-hub.c, but in the next patch we are going to add another sysfs file, so prior to that let's structure things and move already-in-there sysfs code to separate file. NOTE: All the code I'm moving into this new file was written by Alan Stern (in 57e06c11 "EHCI: force high-speed devices to run at full speed"; Jan 16 2007), that's why I'm putting Copyright (C) 2007 by Alan Stern there after explicit request from the author. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-04 00:36:56 +08:00
remove_sysfs_files(ehci);
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
remove_debug_files (ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
/* root hub is shut down separately (first, when possible) */
spin_lock_irq (&ehci->lock);
USB: EHCI: use hrtimer for (s)iTD deallocation This patch (as1579) adds an hrtimer event to handle deallocation of iTDs and siTDs in ehci-hcd. Because of the frame-oriented approach used by the EHCI periodic schedule, the hardware can continue to access the Transfer Descriptor for isochronous (or split-isochronous) transactions for up to a millisecond after the transaction completes. The iTD (or siTD) must not be reused before then. The strategy currently used involves putting completed iTDs on a list of cached entries and every so often returning them to the endpoint's free list. The new strategy reduces overhead by putting completed iTDs back on the free list immediately, although they are not reused until it is safe to do so. When the isochronous endpoint stops (its queue becomes empty), the iTDs on its free list get moved to a global list, from which they will be deallocated after a minimum of 2 ms. This delay is what the new hrtimer event is for. Overall this may not be a tremendous improvement over the current code, but to me it seems a lot more clear and logical. In addition, it removes the need for each iTD to keep a reference to the ehci_iso_stream it belongs to, since the iTD never needs to be moved back to the stream's free list from the global list. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:35 +08:00
end_free_itds(ehci);
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
spin_unlock_irq (&ehci->lock);
ehci_mem_cleanup (ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB host: Move AMD PLL quirk to pci-quirks.c This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-01 14:57:05 +08:00
if (ehci->amd_pll_fix == 1)
usb_amd_dev_put();
USB: EHCI: ASPM quirk of ISOC on AMD SB800 When ASPM PM Feature is enabled on UMI link, devices that use ISOC stream of data transfer may be exposed to longer latency causing less than optimal per- formance of the device. The longer latencies are normal and are due to link wake time coming out of low power state which happens frequently to save power when the link is not active. The following code will make exception for certain features of ASPM to be by passed and keep the logic normal state only when the ISOC device is connected and active. This change will allow the device to run at optimal performance yet minimize the impact on overall power savings. Signed-off-by: Alex He <alex.he@amd.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-07 10:10:08 +08:00
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
dbg_status (ehci, "ehci_stop completed",
ehci_readl(ehci, &ehci->regs->status));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
/* one-time init, only for memory state */
static int ehci_init(struct usb_hcd *hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u32 temp;
int retval;
u32 hcc_params;
USB: EHCI: split ehci_qh into hw and sw parts The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-14 07:23:29 +08:00
struct ehci_qh_hw *hw;
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
spin_lock_init(&ehci->lock);
USB: EHCI: add need_io_watchdog flag to ehci_hcd Basically the io watchdog is only useful for those quirk HCDs. For most good ones, it only brings unnecessary wakeups. At least, I know the Intel EHCI HCDs should turn off the flag. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 17:30:41 +08:00
/*
* keep io watchdog by default, those good HCDs could turn off it later
*/
ehci->need_io_watchdog = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: introduce high-res timer This patch (as1572) begins the conversion of ehci-hcd over to using high-resolution timers rather than old-fashioned low-resolution kernel timers. This reduces overhead caused by timer roundoff on systems where HZ is smaller than 1000. Also, the new timer framework introduced here is much more logical and easily extended than the ad-hoc approach ehci-hcd currently uses for timers. An hrtimer structure is added to ehci_hcd, along with a bitflag array and an array of ktime_t values, to keep track of which timing events are pending and what their expiration times are. Only the infrastructure for the timing operations is added in this patch. Later patches will add routines for handling each of the various timing events the driver needs. In some cases the new hrtimer handlers will replace the existing handlers for ehci-hcd's kernel timers; as this happens the old timers will be removed. In other cases the new timing events will replace busy-wait loops. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:54 +08:00
hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ehci->hrtimer.function = ehci_hrtimer_func;
ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
USB: EHCI: fix DMA deallocation bug This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-06 23:17:09 +08:00
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
USB: EHCI: Allow users to override 80% max periodic bandwidth There are cases, when 80% max isochronous bandwidth is too limiting. For example I have two USB video capture cards which stream uncompressed video, and to stream full NTSC + PAL videos we'd need NTSC 640x480 YUV422 @30fps ~17.6 MB/s PAL 720x576 YUV422 @25fps ~19.7 MB/s isoc bandwidth. Now, due to limited alt settings in capture devices NTSC one ends up streaming with max_pkt_size=2688 and PAL with max_pkt_size=2892, both with interval=1. In terms of microframe time allocation this gives NTSC ~53us PAL ~57us and together ~110us > 100us == 80% of 125us uframe time. So those two devices can't work together simultaneously because the'd over allocate isochronous bandwidth. 80% seemed a bit arbitrary to me, and I've tried to raise it to 90% and both devices started to work together, so I though sometimes it would be a good idea for users to override hardcoded default of max 80% isoc bandwidth. After all, isn't it a user who should decide how to load the bus? If I can live with 10% or even 5% bulk bandwidth that should be ok. I'm a USB newcomer, but that 80% set in stone by USB 2.0 specification seems to be chosen pretty arbitrary to me, just to serve as a reasonable default. NOTE 1 ~~~~~~ for two streams with max_pkt_size=3072 (worst case) both time allocation would be 60us+60us=120us which is 96% periodic bandwidth leaving 4% for bulk and control. Alan Stern suggested that bulk then would be problematic (less than 300*8 bittimes left per microframe), but I think that is still enough for control traffic. NOTE 2 ~~~~~~ Sarah Sharp expressed concern that maxing out periodic bandwidth could lead to vendor-specific hardware bugs on host controllers, because > It's entirely possible that you'll run into > vendor-specific bugs if you try to pack the schedule with isochronous > transfers. I don't think any hardware designer would seriously test or > validate their hardware with a schedule that is basically a violation of > the USB bus spec (more than 80% for periodic transfers). So far I've only tested this patch on my HP Mini 5103 with N10 chipset kirr@mini:~$ lspci 00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8059 PCI-E Gigabit Ethernet Controller (rev 11) and the system works stable with 110us/uframe (~88%) isoc bandwith allocated for above-mentioned isochronous transfers. NOTE 3 ~~~~~~ This feature is off by default. I mean max periodic bandwidth is set to 100us/uframe by default exactly as it was before the patch. So only those of us who need the extreme settings are taking the risk - normal users who do not alter uframe_periodic_max sysfs attribute should not see any change at all. NOTE 4 ~~~~~~ I've tried to update documentation in Documentation/ABI/ thoroughly, but only "TBD" was put into Documentation/usb/ehci.txt -- the text there seems to be outdated and much needing refreshing, before it could be amended. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-04 00:36:57 +08:00
/*
* by default set standard 80% (== 100 usec/uframe) max periodic
* bandwidth as required by USB 2.0
*/
ehci->uframe_periodic_max = 100;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
USB: EHCI: convert singly-linked lists to list_heads This patch (as1664) converts ehci-hcd's async_unlink, async_iaa, and intr_unlink from singly-linked lists to standard doubly-linked list_heads. Originally it didn't seem necessary to use list_heads, because items are always added to and removed from these lists in FIFO order. But now with more list processing going on, it's easier to use the standard routines than continue with a roll-your-own approach. I don't know if the code ends up being notably shorter, but the patterns will be more familiar to any kernel hacker. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:45 +08:00
INIT_LIST_HEAD(&ehci->async_unlink);
USB: EHCI: improve end_unlink_async() This patch (as1665) changes the way ehci-hcd's end_unlink_async() routine works in order to avoid recursive execution and to be more efficient: Now when an IAA cycle ends, a new one gets started up right away (if it is needed) instead of waiting until the just-unlinked QH has been processed. The async_iaa list is renamed to async_idle, which better expresses its new purpose: It is now the list of QHs which are now completely idle and are waiting to be processed by end_unlink_async(). A new flag is added to track whether an IAA cycle is in progress, because the list formerly known as async_iaa no longer stores the QHs waiting for the IAA to finish. The decision about how many QHs to process when an IAA cycle ends is now made at the end of the cycle, when we know the current state of the hardware, rather than at the beginning. This means a bunch of logic got moved from start_iaa_cycle() to end_unlink_async(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:58 +08:00
INIT_LIST_HEAD(&ehci->async_idle);
USB: EHCI: improve interrupt qh unlink ehci-hcd currently unlinks an interrupt QH when it becomes empty, that is, after its last URB completes. This works well because in almost all cases, the completion handler for an interrupt URB resubmits the URB; therefore the QH doesn't become empty and doesn't get unlinked. When we start using tasklets for URB completion, this scheme won't work as well. The resubmission won't occur until the tasklet runs, which will be some time after the completion is queued with the tasklet. During that delay, the QH will be empty and so will be unlinked unnecessarily. To prevent this problem, this patch adds a 5-ms time delay before empty interrupt QHs are unlinked. Most often, during that time the interrupt URB will be resubmitted and thus we can avoid unlinking the QH. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 22:53:10 +08:00
INIT_LIST_HEAD(&ehci->intr_unlink_wait);
USB: EHCI: convert singly-linked lists to list_heads This patch (as1664) converts ehci-hcd's async_unlink, async_iaa, and intr_unlink from singly-linked lists to standard doubly-linked list_heads. Originally it didn't seem necessary to use list_heads, because items are always added to and removed from these lists in FIFO order. But now with more list processing going on, it's easier to use the standard routines than continue with a roll-your-own approach. I don't know if the code ends up being notably shorter, but the patterns will be more familiar to any kernel hacker. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:45 +08:00
INIT_LIST_HEAD(&ehci->intr_unlink);
USB: EHCI: always scan each interrupt QH This patch (as1585) fixes a bug in ehci-hcd's scheme for scanning interrupt QHs. Currently a single routine takes care of scanning everything on the periodic schedule. Whenever an interrupt occurs, it scans all isochronous and interrupt URBs scheduled for frames that have elapsed since the last scan. This has two disadvantages. The first is relatively minor: An interrupt QH is likely to end up getting scanned multiple times, particularly if the last scan was not fairly recent. (The current code avoids this by maintaining a periodic_stamp in each interrupt QH.) The second is more serious. The periodic schedule wraps around. If the last scan occurred during frame N, and the next scan occurs when the schedule has gone through an entire cycle and is back at frame N, the scanning code won't look at any frames other than N. Consequently it won't see any QHs that completed during frame N-1 or earlier. The patch replaces the entire frame-based approach for scanning interrupt QHs with a new routine using a list-based approach, the same as for async QHs. This has a slight disadvantage, because it means that all interrupt QHs have to be scanned every time. But it is more robust than the current approach. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:00 +08:00
INIT_LIST_HEAD(&ehci->intr_qh_list);
USB: EHCI: slow down ITD reuse Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Tested-by: Philippe Carriere <philippe-f.carriere@wanadoo.fr> Tested-by: Federico Briata <federicobriata@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-09 08:07:58 +08:00
INIT_LIST_HEAD(&ehci->cached_itd_list);
USB: EHCI: defer reclamation of siTDs This patch (as1369) fixes a problem in ehci-hcd. Some controllers occasionally run into trouble when the driver reclaims siTDs too quickly. This can happen while streaming audio; it causes the controller to crash. The patch changes siTD reclamation to work the same way as iTD reclamation: Completed siTDs are stored on a list and not reused until at least one frame has passed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nate Case <ncase@xes-inc.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-09 04:56:37 +08:00
INIT_LIST_HEAD(&ehci->cached_sitd_list);
USB: EHCI: fix DMA deallocation bug This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-06 23:17:09 +08:00
Revert "USB: EHCI: work around bug in the Philips ISP1562 controller" This reverts commit 1996e6c572969a8cf6d7fa97eef621219acd94a9. It turned out to not be needed, now that the real fix has been committed. Reported-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-21 23:54:43 +08:00
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
USB: EHCI: fix DMA deallocation bug This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> CC: David Brownell <david-b@pacbell.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-06 23:17:09 +08:00
/* periodic schedule size can be smaller than default */
switch (EHCI_TUNE_FLS) {
case 0: ehci->periodic_size = 1024; break;
case 1: ehci->periodic_size = 512; break;
case 2: ehci->periodic_size = 256; break;
default: BUG();
}
}
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return retval;
/* controllers may cache some of the periodic schedule ... */
USB: EHCI whitespace fixes (cosmetic) [ ... when you have an editor set to remind you of whitespace bugs ... ] Cosmetic EHCI changes: remove end-of-line whitespace, spaces before tabs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-31 05:50:06 +08:00
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
EHCI: use the isochronous scheduling threshold This patch (as1609) changes the way ehci-hcd uses the "Isochronous Scheduling Threshold" in its calculations. Until now the code has ignored the threshold except for certain Intel PCI-based controllers. This violates the EHCI spec. The new code takes the threshold into account always, removing the need for the fs_i_thresh quirk flag. In addition it implements the "full frame cache" setting more efficiently, moving forward only as far as the next frame boundary instead of always moving forward 8 microframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-29 04:01:34 +08:00
ehci->i_thresh = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else // N microframes cached
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
* as the 'reclamation list head' too.
* its dummy is used in hw_alt_next of many tds, to prevent the qh
* from automatically advancing to the next td after short reads.
*/
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci->async->qh_next.qh = NULL;
USB: EHCI: split ehci_qh into hw and sw parts The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-14 07:23:29 +08:00
hw = ehci->async->hw;
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
USB: fix PS3 EHCI systems After commit aaa0ef289afe9186f81e2340114ea413eef0492a "PS3 EHCI QH read work-around", Terratec Grabby (em28xx) stopped working with AMD Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only fix, the following patch adds a conditional block around it. Signed-off-by: Ricardo Martins <rasm@fe.up.pt> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-23 01:02:03 +08:00
#if defined(CONFIG_PPC_PS3)
USB: EHCI: add symbolic constants for QHs This patch (as1568) introduces symbolic constants for some of the less-frequently used bitfields in the QH structure. This makes the code a little easier to read and understand. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:32 +08:00
hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE);
USB: fix PS3 EHCI systems After commit aaa0ef289afe9186f81e2340114ea413eef0492a "PS3 EHCI QH read work-around", Terratec Grabby (em28xx) stopped working with AMD Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only fix, the following patch adds a conditional block around it. Signed-off-by: Ricardo Martins <rasm@fe.up.pt> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-23 01:02:03 +08:00
#endif
USB: EHCI: split ehci_qh into hw and sw parts The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-14 07:23:29 +08:00
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
hw->hw_qtd_next = EHCI_LIST_END(ehci);
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci->async->qh_state = QH_STATE_LINKED;
USB: EHCI: split ehci_qh into hw and sw parts The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <dbrownell@users.sourceforge.net> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-14 07:23:29 +08:00
hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* clear interrupt enables, set irq latency */
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
log2_irq_thresh = 0;
temp = 1 << (16 + log2_irq_thresh);
USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits This patch will enable Per-port event feature defined in EHCI 1.1 addendum. This feature addresses an issue where HCD is currently required to read and parse PORTSC for all enabled root hub ports. With this patch, the overhead will be reduced. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 15:47:56 +08:00
if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
ehci->has_ppcd = 1;
ehci_dbg(ehci, "enable per-port change event\n");
temp |= CMD_PPCEE;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (HCC_CANPARK(hcc_params)) {
/* HW default park == 3, on hardware that supports it (like
* NVidia and ALI silicon), maximizes throughput on the async
* schedule by avoiding QH fetches between transfers.
*
* With fast usb storage devices and NForce2, "park" seems to
* make problems: throughput reduction (!), data errors...
*/
if (park) {
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
park = min(park, (unsigned) 3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
temp |= CMD_PARK;
temp |= park << 8;
}
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci_dbg(ehci, "park %d\n", park);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* periodic schedule size can be smaller than default */
temp &= ~(3 << 2);
temp |= (EHCI_TUNE_FLS << 2);
}
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci->command = temp;
USB: EHCI: add native scatter-gather support This patch (as1300) adds native scatter-gather support to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-07 01:29:40 +08:00
/* Accept arbitrarily long scatter-gather lists */
USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to enforce the host controller's local memory utilization we also need to disable native scatter-gather support, otherwise hcd_alloc_coherent() in map_urb_for_dma() is called with urb->transfer_buffer == NULL, that triggers a NULL pointer dereference. We can also consider to add a WARN_ON() and return an error code to better catch this problem in the future. At the moment no driver seems to hit this bug, so I should consider this a low-priority fix. Signed-off-by: Andrea Righi <arighi@develer.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-28 22:56:45 +08:00
if (!(hcd->driver->flags & HCD_LOCAL_MEM))
hcd->self.sg_tablesize = ~0;
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
return 0;
}
/* start HC running; it's halted, ehci_init() has been run (once) */
static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
u32 hcc_params;
USB: switch ehci-hcd to new polling scheme Switch ehci-hcd to use the new polling scheme, which reports root hub status changes via the interrupt handler, in an asynchronous fashion. Doing so disables polling for status changes (whose handler is rh_timer_func). Tested on a Geode GX machine, which is now capable of running at =~ 5 timer interrupts per second (in the -rt tree), resulting in significant power savings. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22 05:45:59 +08:00
hcd->uses_new_polling = 1;
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
/* EHCI spec section 4.1 */
usb: Remove ehci_reset call from ehci_run Remove the ehci_reset() call done in the ehci_run() routine of the USB EHCI host controller driver and add an ehci_reset() call to the probe processing of all EHCI platform drivers that do not already call ehci_reset(). The call to ehci_reset() from ehci_run() was problematic for several platform drivers, and unnecessary for others. This change moves the decision to call ehci_reset() at driver startup to the platform driver code. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2011-11-23 10:04:45 +08:00
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
/*
* hcc_params controls whether ehci->regs->segment must (!!!)
* be used; it constrains QH/ITD/SITD and QTD locations.
* pci_pool consistent memory always uses segment zero.
* streaming mappings for I/O buffers, like pci_map_single(),
* can return segments above 4GB, if the device allows.
*
* NOTE: the dma mask is visible through dma_supported(), so
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
* Scsi_Host.highmem_io, and so forth. It's readonly to all
* host side drivers though.
*/
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
if (HCC_64BIT_ADDR(hcc_params)) {
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, 0, &ehci->regs->segment);
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
#if 0
// this is deeply broken on almost all architectures
dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 10:01:13 +08:00
if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci_info(ehci, "enabled 64bit DMA\n");
#endif
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
ehci->command |= CMD_RUN;
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, ehci->command, &ehci->regs->command);
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
dbg_cmd (ehci, "init", ehci->command);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
* are explicitly handed to companion controller(s), so no TT is
* involved with the root hub. (Except where one is integrated,
* and there's no companion controller unless maybe for USB OTG.)
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
*
* Turning on the CF flag will transfer ownership of all ports
* from the companions to the EHCI controller. If any of the
* companions are in the middle of a port reset at the time, it
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
USB: fix up EHCI startup synchronization A recent patch added software synchronization during EHCI startup, so ports aren't switched away from the companion controllers after resets have started. This patch adds a short delay letting hardware finish that port switching before any new resets begin ... so both ends of that hardware race window are closed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dave Miller <davem@davemloft.net> Cc: Dely Sy <dely.l.sy@intel.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-14 08:22:30 +08:00
* guarantees that no resets are in progress. After we set CF,
* a short delay lets the hardware catch up; new resets shouldn't
* be started before the port switching actions could complete.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
down_write(&ehci_cf_port_reset_rwsem);
USB: EHCI: remove usages of hcd->state This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 04:31:30 +08:00
ehci->rh_state = EHCI_RH_RUNNING;
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
USB: fix up EHCI startup synchronization A recent patch added software synchronization during EHCI startup, so ports aren't switched away from the companion controllers after resets have started. This patch adds a short delay letting hardware finish that port switching before any new resets begin ... so both ends of that hardware race window are closed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dave Miller <davem@davemloft.net> Cc: Dely Sy <dely.l.sy@intel.com> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-14 08:22:30 +08:00
msleep(5);
USB: mutual exclusion for EHCI init and port resets This patch (as999) fixes a problem that sometimes shows up when host controller driver modules are loaded in the wrong order. If ehci-hcd happens to initialize an EHCI controller while the companion OHCI or UHCI controller is in the middle of a port reset, the reset can fail and the companion may get very confused. The patch adds an rw-semaphore and uses it to keep EHCI initialization and port resets mutually exclusive. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: David Miller <davem@davemloft.net> Cc: Dely L Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11 04:27:07 +08:00
up_write(&ehci_cf_port_reset_rwsem);
USB: work around for EHCI with quirky periodic schedules a quirky chipset needs periodic schedules to run for a minimum time before they can be disabled again. This enforces the requirement with a time stamp and a calculated delay Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-27 22:17:59 +08:00
ehci->last_periodic_enable = ktime_get_real();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: Support controllers with big endian capability regs The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-04 02:11:57 +08:00
temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ehci_info (ehci,
USB: EHCI, OHCI, UHCI: remove version numbers This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:47:15 +08:00
"USB %x.%x started, EHCI %x.%02x%s\n",
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
USB: EHCI, OHCI, UHCI: remove version numbers This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:47:15 +08:00
temp >> 8, temp & 0xff,
USB: add ehci_hcd.ignore_oc parameter Certain boards seem to like to issue false overcurrent notifications, for example on ports that don't have anything connected to them. This looks like a hardware error, at the level of noise to those ports' overcurrent input signals (or non-debounced VBUS comparators). This surfaces to users as truly massive amounts of syslog spam from khubd (which is appropriate for real hardware problems, except for the volume from multiple ports). Using this new "ignore_oc" flag helps such systems work more sanely, by preventing such indications from getting to khubd (and spam syslog). The downside is of course that true overcurrent errors will be masked; they'll appear as spontaneous disconnects, without the diagnostics that will let users troubleshoot issues like short circuited cables. Note that the bulk of these reports seem to be with VIA southbridges, but I think some were with Intel ones. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-17 15:34:58 +08:00
ignore_oc ? ", overcurrent ignored" : "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
ehci_writel(ehci, INTR_MASK,
&ehci->regs->intr_enable); /* Turn On Interrupts */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] USB: EHCI updates split init/reinit logic for resume Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-24 07:45:37 +08:00
/* GRR this is run-once init(), being done every time the HC starts.
* So long as they're part of class devices, we can't do it init()
* since the class device isn't created that early.
*/
create_debug_files(ehci);
USB: EHCI: Move sysfs related bits into ehci-sysfs.c The only sysfs attr implemented so far is "companion" from ehci-hub.c, but in the next patch we are going to add another sysfs file, so prior to that let's structure things and move already-in-there sysfs code to separate file. NOTE: All the code I'm moving into this new file was written by Alan Stern (in 57e06c11 "EHCI: force high-speed devices to run at full speed"; Jan 16 2007), that's why I'm putting Copyright (C) 2007 by Alan Stern there after explicit request from the author. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-04 00:36:56 +08:00
create_sysfs_files(ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
}
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
int ehci_setup(struct usb_hcd *hcd)
EHCI : introduce a common ehci_setup This allow to clean duplicated code in most of SOC driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> # fixes 3.1 build error Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-03 01:47:33 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
ehci->regs = (void __iomem *)ehci->caps +
HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci->sbrn = HCD_USB2;
USB: EHCI: initialize data before resetting hardware Currently, EHCI initialization turns off the controller (in case it was left running by the firmware) before setting up the ehci_hcd data structure. This patch (as1565) reverses that order. Although it doesn't matter now, it will matter later on when future additions to ehci_halt() will want to acquire a spinlock that gets initialized by ehci_init(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:09 +08:00
/* data structure init */
retval = ehci_init(hcd);
EHCI : introduce a common ehci_setup This allow to clean duplicated code in most of SOC driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> # fixes 3.1 build error Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-03 01:47:33 +08:00
if (retval)
return retval;
USB: EHCI: initialize data before resetting hardware Currently, EHCI initialization turns off the controller (in case it was left running by the firmware) before setting up the ehci_hcd data structure. This patch (as1565) reverses that order. Although it doesn't matter now, it will matter later on when future additions to ehci_halt() will want to acquire a spinlock that gets initialized by ehci_init(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:09 +08:00
retval = ehci_halt(ehci);
EHCI : introduce a common ehci_setup This allow to clean duplicated code in most of SOC driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> # fixes 3.1 build error Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-03 01:47:33 +08:00
if (retval)
return retval;
ehci_reset(ehci);
return 0;
}
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
EXPORT_SYMBOL_GPL(ehci_setup);
EHCI : introduce a common ehci_setup This allow to clean duplicated code in most of SOC driver. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> # fixes 3.1 build error Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-03 01:47:33 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------------------------------------------------------*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 06:04:53 +08:00
u32 status, masked_status, pcd_status = 0, cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int bh;
spin_lock (&ehci->lock);
USB: Implement support for EHCI with big endian MMIO This patch implements supports for EHCI controllers whose MMIO registers are big endian and enables that functionality for the Toshiba SCC chip. It does _not_ add support for big endian in-memory data structures as this is not needed for that chip and I hope it will never be. The guts of the patch are to convert readl(...) to ehci_readl(ehci, ...) and similarly for register writes. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-15 03:54:08 +08:00
status = ehci_readl(ehci, &ehci->regs->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* e.g. cardbus physical eject */
if (status == ~(u32) 0) {
ehci_dbg (ehci, "device removed\n");
goto dead;
}
EHCI: always clear the STS_FLR status bit This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 23:33:00 +08:00
/*
* We don't use STS_FLR, but some controllers don't like it to
* remain on, so mask it out along with the other status bits.
*/
masked_status = status & (INTR_MASK | STS_FLR);
USB: remove remaining usages of hcd->state from usbcore and fix regression This patch (as1467) removes the last usages of hcd->state from usbcore. We no longer check to see if an interrupt handler finds that a controller has died; instead we rely on host controller drivers to make an explicit call to usb_hc_died(). This fixes a regression introduced by commit 9b37596a2e860404503a3f2a6513db60c296bfdc (USB: move usbcore away from hcd->state). It used to be that when a controller shared an IRQ with another device and an interrupt arrived while hcd->state was set to HC_STATE_HALT, the interrupt handler would be skipped. The commit removed that test; as a result the current code doesn't skip calling the handler and ends up believing the controller has died, even though it's only temporarily stopped. The solution is to ignore HC_STATE_HALT following the handler's return. As a consequence of this change, several of the host controller drivers need to be modified. They can no longer implicitly rely on usbcore realizing that a controller has died because of hcd->state. The patch adds calls to usb_hc_died() in the appropriate places. The patch also changes a few of the interrupt handlers. They don't expect to be called when hcd->state is equal to HC_STATE_HALT, even if the controller is still alive. Early returns were added to avoid any confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Manuel Lauss <manuel.lauss@googlemail.com> CC: Rodolfo Giometti <giometti@linux.it> CC: Olav Kongas <ok@artecdesign.ee> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18 05:27:12 +08:00
/* Shared IRQ? */
USB: EHCI: remove usages of hcd->state This patch (as1483) improves the ehci-hcd driver family by getting rid of the reliance on the hcd->state variable. It has no clear owner and it isn't protected by the usual HCD locks. In its place, the patch adds a new, private ehci->rh_state field to record the state of the root hub. Along the way, the patch removes a couple of lines containing redundant assignments to the state variable. Also, the QUIESCING state simply gets changed to the RUNNING state, because the driver doesn't make any distinction between them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-19 04:31:30 +08:00
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock(&ehci->lock);
return IRQ_NONE;
}
/* clear (just) interrupts */
USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 06:04:53 +08:00
ehci_writel(ehci, masked_status, &ehci->regs->status);
USB: fix ehci unlink regressions The recent EHCI driver update to split the IAA watchdog timer out from the other timers made several things work better, but not everything; and it created a couple new issues in bugzilla. Ergo this patch: - Handle a should-be-rare SMP race between the watchdog firing and (very late) IAA interrupts; - Remove a shouldn't-have-been-added WARN_ON() test; - Guard against one observed OOPS; - If this watchdog fires during clean HC shutdown, it should act as a NOP instead of interfering with the shutdown sequence; - Guard against silicon errata hypothesized by some vendors: * IAA status latch broken, but IAAD cleared OK; * IAAD wasn't cleared when IAA status got reported; The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are both regressions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-08 05:49:42 +08:00
cmd = ehci_readl(ehci, &ehci->regs->command);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bh = 0;
USB: ehci: minor cleanups Minor cleanups to the EHCI code: revision history is what source code repositories should have. Switch to a more standard way to kick in verbose debugging -- don't be EHCI-specific. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02 03:42:05 +08:00
#ifdef VERBOSE_DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* unrequested/ignored: Frame List Rollover */
dbg_status (ehci, "irq", status);
#endif
/* INT, ERR, and IAA interrupt rates can be throttled */
/* normal [4.15.1.2] or error [4.15.1.1] completion */
if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
if (likely ((status & STS_ERR) == 0))
COUNT (ehci->stats.normal);
else
COUNT (ehci->stats.error);
bh = 1;
}
/* complete the unlinking of some qh [4.15.2.3] */
if (status & STS_IAA) {
USB: EHCI: use hrtimer for the IAA watchdog This patch (as1581) replaces the iaa_watchdog kernel timer used by ehci-hcd with an hrtimer event, in keeping with the general conversion to high-res timers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:44 +08:00
/* Turn off the IAA watchdog */
ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG);
/*
* Mild optimization: Allow another IAAD to reset the
* hrtimer, if one occurs before the next expiration.
* In theory we could always cancel the hrtimer, but
* tests show that about half the time it will be reset
* for some other event anyway.
*/
if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG)
++ehci->next_hrtimer_event;
USB: fix ehci unlink regressions The recent EHCI driver update to split the IAA watchdog timer out from the other timers made several things work better, but not everything; and it created a couple new issues in bugzilla. Ergo this patch: - Handle a should-be-rare SMP race between the watchdog firing and (very late) IAA interrupts; - Remove a shouldn't-have-been-added WARN_ON() test; - Guard against one observed OOPS; - If this watchdog fires during clean HC shutdown, it should act as a NOP instead of interfering with the shutdown sequence; - Guard against silicon errata hypothesized by some vendors: * IAA status latch broken, but IAAD cleared OK; * IAAD wasn't cleared when IAA status got reported; The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are both regressions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-08 05:49:42 +08:00
/* guard against (alleged) silicon errata */
EHCI: don't try to clear the IAAD bit This patch (as1541) corrects a small mistake in ehci-hcd. The IAAD (Interrupt on Async Advance Doorbell) bit in the USBCMD register is designed, as its name says, to act as a "doorbell". That is, the driver activates the bit by setting it to 1, and the hardware deactivates it later by setting it back to 0. The driver cannot clear the bit by writing a 0 to it; such writes are simply ignored. Therefore there is no reason for ehci-hcd to try to clear the bit. The patch removes the two instances where such attempts occur. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 03:23:25 +08:00
if (cmd & CMD_IAAD)
USB: fix ehci unlink regressions The recent EHCI driver update to split the IAA watchdog timer out from the other timers made several things work better, but not everything; and it created a couple new issues in bugzilla. Ergo this patch: - Handle a should-be-rare SMP race between the watchdog firing and (very late) IAA interrupts; - Remove a shouldn't-have-been-added WARN_ON() test; - Guard against one observed OOPS; - If this watchdog fires during clean HC shutdown, it should act as a NOP instead of interfering with the shutdown sequence; - Guard against silicon errata hypothesized by some vendors: * IAA status latch broken, but IAAD cleared OK; * IAAD wasn't cleared when IAA status got reported; The WARN_ON is in bugzilla as 10168; the OOPS as 10078; these are both regressions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Tested-by: Gordon Farquharson <gordonfarquharson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-08 05:49:42 +08:00
ehci_dbg(ehci, "IAA with IAAD still set?\n");
USB: EHCI: improve end_unlink_async() This patch (as1665) changes the way ehci-hcd's end_unlink_async() routine works in order to avoid recursive execution and to be more efficient: Now when an IAA cycle ends, a new one gets started up right away (if it is needed) instead of waiting until the just-unlinked QH has been processed. The async_iaa list is renamed to async_idle, which better expresses its new purpose: It is now the list of QHs which are now completely idle and are waiting to be processed by end_unlink_async(). A new flag is added to track whether an IAA cycle is in progress, because the list formerly known as async_iaa no longer stores the QHs waiting for the IAA to finish. The decision about how many QHs to process when an IAA cycle ends is now made at the end of the cycle, when we know the current state of the hardware, rather than at the beginning. This means a bunch of logic got moved from start_iaa_cycle() to end_unlink_async(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:58 +08:00
if (ehci->iaa_in_progress)
USB: EHCI: rename "reclaim" This patch (as1569) renames the ehci->reclaim list in ehci-hcd. The word "reclaim" is used in the EHCI specification to mean something quite different, and "unlink_next" is more descriptive of the list's purpose anyway. Similarly, the "reclaim" field in the ehci_stats structure is renamed "iaa", which is more meaningful (to experts, anyway) and is a better match for the "lost_iaa" field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:38 +08:00
COUNT(ehci->stats.iaa);
USB: EHCI: work around silicon bug in Intel's EHCI controllers This patch (as1660) works around a hardware problem present in some (if not all) Intel EHCI controllers. After a QH has been unlinked from the async schedule and the corresponding IAA interrupt has occurred, the controller is not supposed access the QH and its qTDs. There certainly shouldn't be any more DMA writes to those structures. Nevertheless, Intel's controllers have been observed to perform a final writeback to the QH's overlay region and to the most recent qTD. For more information and a test program to determine whether this problem is present in a particular controller, see http://marc.info/?l=linux-usb&m=135492071812265&w=2 http://marc.info/?l=linux-usb&m=136182570800963&w=2 This patch works around the problem by always waiting for two IAA cycles when unlinking an async QH. The extra IAA delay gives the controller time to perform its final writeback. Surprisingly enough, the effects of this silicon bug have gone undetected until quite recently. More through luck than anything else, it hasn't caused any apparent problems. However, it does interact badly with the path that follows this one, so it needs to be addressed. This is the first part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Stephen Thirlwall <sdt@dr.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-01 23:50:08 +08:00
end_unlink_async(ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* remote wakeup [4.3.1] */
[PATCH] USB: ehci fix driver model wakeup flags On some systems, EHCI seems to be getting IRQs too early during driver setup ... before the root hub is allocated, in particular, making trouble for any code chasing down root hub pointers! In this case, it seems to be safe to just ignore the root hub setting. Thanks to Rafael J. Wysocki for getting this properly tested. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-23 09:05:18 +08:00
if (status & STS_PCD) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned i = HCS_N_PORTS (ehci->hcs_params);
USB: EHCI: improve use of per-port status-change bits This patch (as1634) simplifies some of the code associated with the per-port change bits added in EHCI-1.1, and in particular it fixes a bug in the logic of ehci_hub_status_data(). Even if the change bit doesn't indicate anything happened on a particular port, we still have to notify the core about changes to the suspend or reset status. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-19 00:05:08 +08:00
u32 ppcd = ~0;
USB: ehci: remove obsolete workaround for bogus IRQs It was pointed out that we found and fixed the cause of the "bogus" fatal IRQ reports some time ago ... this patch removes the code which was working around that bug ("status" got clobbered), and a comment which needlessly confused folk reading this code. This also includes a minor cleanup to the code which fixed that bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-06 15:37:52 +08:00
/* kick root hub later */
USB: switch ehci-hcd to new polling scheme Switch ehci-hcd to use the new polling scheme, which reports root hub status changes via the interrupt handler, in an asynchronous fashion. Doing so disables polling for status changes (whose handler is rh_timer_func). Tested on a Geode GX machine, which is now capable of running at =~ 5 timer interrupts per second (in the -rt tree), resulting in significant power savings. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22 05:45:59 +08:00
pcd_status = status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* resume root hub? */
EHCI: fix criterion for resuming the root hub This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 03:24:15 +08:00
if (ehci->rh_state == EHCI_RH_SUSPENDED)
EHCI: Fix root-hub and port suspend/resume problems This patch (as738b) fixes numerous problems in the controller/root-hub suspend/resume/remote-wakeup support in ehci-hcd: The bus_resume() routine should wake up only the ports that were suspended by bus_suspend(). Ports that were already suspended should remain that way. The interrupt mask is used to detect loss of power in the bus_resume() routine (if the mask is 0 then power was lost). However bus_suspend() always sets the mask to 0. Instead the mask should retain its normal value, with port-change-detect interrupts disabled if remote wakeup is turned off. The interrupt mask should be reset to its correct value at the end of bus_resume() regardless of whether power was lost. bus_resume() reinitializes the operational registers if power was lost. However those registers are not in the aux power well, hence they can lose their values whenever the controller is put into D3. They should always be reinitialized. When a port-change interrupt occurs and the root hub is suspended, the interrupt handler should request a root-hub resume instead of starting up the controller all by itself. There's no need for the interrupt handler to request a root-hub resume every time a suspended port sends a remote-wakeup request. The pci_resume() method doesn't need to check for connected ports when deciding whether or not to reset the controller. It can make that decision based on whether Vaux power was maintained. Even when the controller does not need to be reset, pci_resume() must undo the effect of pci_suspend() by re-enabling the interrupt mask. If power was lost, pci_resume() must not call ehci_run(). At this point the root hub is still supposed to be suspended, not running. It's enough to rewrite the command register and set the configured_flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-10 03:42:16 +08:00
usb_hcd_resume_root_hub(hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits This patch will enable Per-port event feature defined in EHCI 1.1 addendum. This feature addresses an issue where HCD is currently required to read and parse PORTSC for all enabled root hub ports. With this patch, the overhead will be reduced. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 15:47:56 +08:00
/* get per-port change detect bits */
if (ehci->has_ppcd)
ppcd = status >> 16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while (i--) {
USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits This patch will enable Per-port event feature defined in EHCI 1.1 addendum. This feature addresses an issue where HCD is currently required to read and parse PORTSC for all enabled root hub ports. With this patch, the overhead will be reduced. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 15:47:56 +08:00
int pstatus;
/* leverage per-port change bits feature */
USB: EHCI: improve use of per-port status-change bits This patch (as1634) simplifies some of the code associated with the per-port change bits added in EHCI-1.1, and in particular it fixes a bug in the logic of ehci_hub_status_data(). Even if the change bit doesn't indicate anything happened on a particular port, we still have to notify the core about changes to the suspend or reset status. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-19 00:05:08 +08:00
if (!(ppcd & (1 << i)))
USB: EHCI: EHCI 1.1 addendum: Enable Per-port change detect bits This patch will enable Per-port event feature defined in EHCI 1.1 addendum. This feature addresses an issue where HCD is currently required to read and parse PORTSC for all enabled root hub ports. With this patch, the overhead will be reduced. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 15:47:56 +08:00
continue;
pstatus = ehci_readl(ehci,
&ehci->regs->port_status[i]);
[PATCH] USB: ehci: fix bogus alteration of a local variable In a rare and all-but-unused path, the EHCI driver could reuse a variable in a way that'd make trouble. Specifically, if the first root hub port gets an overcurrent event (rare) during a remote wakeup scenario (all but unused in today's Linux, except for folk working with suspend-to-RAM and similar sleep states), that would look like a fatal error which would shut down the controller. Fix by not reusing that variable. Spotted by Per Hallsmark <saxofon@musiker.nu> Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6661 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-30 17:34:42 +08:00
if (pstatus & PORT_OWNER)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
USB: EHCI: fix remote-wakeup support for ARC/TDI core This patch (as1147) fixes the remote-wakeup support for EHCI controllers using the ARC/TDI "embedded-TT" core. These controllers turn off the RESUME bit by themselves when a port resume is complete; hence we need to keep separate track of which ports are suspended or in the process of resuming. The patch also makes a couple of small improvements in ehci_irq(), replacing reads of the command register with the value already stored in a local variable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-06 23:25:53 +08:00
if (!(test_bit(i, &ehci->suspended_ports) &&
((pstatus & PORT_RESUME) ||
!(pstatus & PORT_SUSPEND)) &&
(pstatus & PORT_PE) &&
ehci->reset_done[i] == 0))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
USB: add missing delay during remote wakeup This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-09 00:18:38 +08:00
* stop that signaling. Use 5 ms extra for safety,
* like usb_port_resume() does.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
USB: add missing delay during remote wakeup This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-09 00:18:38 +08:00
ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
EHCI: keep track of ports being resumed and indicate in hub_status_data This patch (as1537) adds a bit-array to ehci-hcd for keeping track of which ports are undergoing a resume transition. If any of the bits are set when ehci_hub_status_data() is called, the routine will return a nonzero value even if no ports have any status changes pending. This will allow usbcore to handle races between root-hub suspend and port wakeup. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Chen Peter-B29397 <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-04 03:24:30 +08:00
set_bit(i, &ehci->resuming_ports);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
USB: EHCI: notify usbcore about port resumes This patch (as1650) adds calls to the new usb_hcd_{start,end}_port_resume() functions to ehci-hcd. Now EHCI root hubs won't be runtime suspended while they are sending a resume signal to one of their ports. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26 06:09:49 +08:00
usb_hcd_start_port_resume(&hcd->self, i);
EHCI: fix remote wakeup regression in 2.6.21-rc There is one significant difference between the behavior of root hubs (as embodied in host controller hardware) and external hubs: When a remote-wakeup signal is received, an external hub sends an interrupt message at the _end_ of the resume sequence but a root hub generates and interrupt at the _beginning_ of the resume sequence. The host system must poll for the end of the sequence. When ehci-hcd was converted to interrupt-driven operation instead of using polling, the remaining need for this particular poll was overlooked. This patch (as894) fixes the problem. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-09 23:52:31 +08:00
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/* PCI errors [4.15.2.4] */
if (unlikely ((status & STS_FATAL) != 0)) {
USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 06:04:53 +08:00
ehci_err(ehci, "fatal error\n");
USB: EHCI: fix remote-wakeup support for ARC/TDI core This patch (as1147) fixes the remote-wakeup support for EHCI controllers using the ARC/TDI "embedded-TT" core. These controllers turn off the RESUME bit by themselves when a port resume is complete; hence we need to keep separate track of which ports are suspended or in the process of resuming. The patch also makes a couple of small improvements in ehci_irq(), replacing reads of the command register with the value already stored in a local variable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Thomas Reitmayr <treitmayr@devbase.at> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-06 23:25:53 +08:00
dbg_cmd(ehci, "fatal", cmd);
dbg_status(ehci, "fatal", status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dead:
USB: remove remaining usages of hcd->state from usbcore and fix regression This patch (as1467) removes the last usages of hcd->state from usbcore. We no longer check to see if an interrupt handler finds that a controller has died; instead we rely on host controller drivers to make an explicit call to usb_hc_died(). This fixes a regression introduced by commit 9b37596a2e860404503a3f2a6513db60c296bfdc (USB: move usbcore away from hcd->state). It used to be that when a controller shared an IRQ with another device and an interrupt arrived while hcd->state was set to HC_STATE_HALT, the interrupt handler would be skipped. The commit removed that test; as a result the current code doesn't skip calling the handler and ends up believing the controller has died, even though it's only temporarily stopped. The solution is to ignore HC_STATE_HALT following the handler's return. As a consequence of this change, several of the host controller drivers need to be modified. They can no longer implicitly rely on usbcore realizing that a controller has died because of hcd->state. The patch adds calls to usb_hc_died() in the appropriate places. The patch also changes a few of the interrupt handlers. They don't expect to be called when hcd->state is equal to HC_STATE_HALT, even if the controller is still alive. Early returns were added to avoid any confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Manuel Lauss <manuel.lauss@googlemail.com> CC: Rodolfo Giometti <giometti@linux.it> CC: Olav Kongas <ok@artecdesign.ee> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18 05:27:12 +08:00
usb_hc_died(hcd);
USB: EHCI: use hrtimer for controller death This patch (as1578) adds an hrtimer event to handle the death of an EHCI controller. When a controller dies, it doesn't necessarily stop running right away. The new event polls at 1-ms intervals to see when all activity has safely stopped. This replaces a busy-wait polling loop in the current code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:31 +08:00
/* Don't let the controller do anything more */
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
ehci->shutdown = true;
USB: EHCI: use hrtimer for controller death This patch (as1578) adds an hrtimer event to handle the death of an EHCI controller. When a controller dies, it doesn't necessarily stop running right away. The new event polls at 1-ms intervals to see when all activity has safely stopped. This replaces a busy-wait polling loop in the current code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:31 +08:00
ehci->rh_state = EHCI_RH_STOPPING;
ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
ehci_writel(ehci, ehci->command, &ehci->regs->command);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
ehci_handle_controller_death(ehci);
/* Handle completions when the controller stops */
bh = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (bh)
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
ehci_work (ehci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock (&ehci->lock);
USB: ehci: remove obsolete workaround for bogus IRQs It was pointed out that we found and fixed the cause of the "bogus" fatal IRQ reports some time ago ... this patch removes the code which was working around that bug ("status" got clobbered), and a comment which needlessly confused folk reading this code. This also includes a minor cleanup to the code which fixed that bug. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-06 15:37:52 +08:00
if (pcd_status)
USB: switch ehci-hcd to new polling scheme Switch ehci-hcd to use the new polling scheme, which reports root hub status changes via the interrupt handler, in an asynchronous fashion. Doing so disables polling for status changes (whose handler is rh_timer_func). Tested on a Geode GX machine, which is now capable of running at =~ 5 timer interrupts per second (in the -rt tree), resulting in significant power savings. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-22 05:45:59 +08:00
usb_hcd_poll_rh_status(hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
/*
* non-error returns are a promise to giveback() the urb later
* we drop ownership so next owner (or urb unlink) can get it
*
* urb + dev is in hcd.self.controller.urb_list
* we're queueing TDs onto software and hardware lists
*
* hcd-specific init for hcpriv hasn't been done yet
*
* NOTE: control, bulk, and interrupt share the same code to append TDs
* to a (possibly active) QH, and the same QH scanning code.
*/
static int ehci_urb_enqueue (
struct usb_hcd *hcd,
struct urb *urb,
[PATCH] gfp_t: drivers/usb Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21 15:21:58 +08:00
gfp_t mem_flags
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct list_head qtd_list;
INIT_LIST_HEAD (&qtd_list);
switch (usb_pipetype (urb->pipe)) {
USB: ehci: paranoia, reject large control transfers Some EHCI fault paths with large control transfers aren't coded. Avoid problems by rejecting transfers that may need two qTDs (16+ KB). This is mostly paranoia; even 4 KB transfers are rare, and most HCDs use lower limits (so it's unlikely anyone would ever try such a thing). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-05 07:11:07 +08:00
case PIPE_CONTROL:
/* qh_completions() code doesn't handle all the fault cases
* in multi-TD control transfers. Even 1KB is rare anyway.
*/
if (urb->transfer_buffer_length > (16 * 1024))
return -EMSGSIZE;
/* FALLTHROUGH */
/* case PIPE_BULK: */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
return submit_async(ehci, urb, &qtd_list, mem_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case PIPE_INTERRUPT:
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
return -ENOMEM;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
return intr_submit(ehci, urb, &qtd_list, mem_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case PIPE_ISOCHRONOUS:
if (urb->dev->speed == USB_SPEED_HIGH)
return itd_submit (ehci, urb, mem_flags);
else
return sitd_submit (ehci, urb, mem_flags);
}
}
/* remove from hardware lists
* completions normally happen asynchronously
*/
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
struct ehci_qh *qh;
unsigned long flags;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
int rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave (&ehci->lock, flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
if (rc)
goto done;
USB: EHCI: consolidate code in ehci_urb_dequeue() This patch (as1668) consolidates two nearly identical code paths in ehci_urb_dequeue(). The test for !qh can be removed because it will never succeed; the fact that usb_hcd_check_unlink_urb() returned 0 means that urb must be queued and therefore urb->hcpriv must point to a QH. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:29 +08:00
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
/*
* We don't expedite dequeue for isochronous URBs.
* Just wait until they complete normally or their
* time slot expires.
*/
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
qh = (struct ehci_qh *) urb->hcpriv;
USB: EHCI: split needs_rescan into two flags This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:11 +08:00
qh->exception = 1;
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
switch (qh->qh_state) {
case QH_STATE_LINKED:
USB: EHCI: consolidate code in ehci_urb_dequeue() This patch (as1668) consolidates two nearly identical code paths in ehci_urb_dequeue(). The test for !qh can be removed because it will never succeed; the fact that usb_hcd_check_unlink_urb() returned 0 means that urb must be queued and therefore urb->hcpriv must point to a QH. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:29 +08:00
if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
start_unlink_intr(ehci, qh);
else
start_unlink_async(ehci, qh);
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
break;
USB: EHCI: split needs_rescan into two flags This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:11 +08:00
case QH_STATE_COMPLETING:
qh->dequeue_during_giveback = 1;
break;
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
case QH_STATE_UNLINK:
case QH_STATE_UNLINK_WAIT:
/* already started */
break;
case QH_STATE_IDLE:
USB: EHCI: fix two new bugs related to Clear-TT-Buffer This patch (as1273) fixes two(!) bugs introduced by the new Clear-TT-Buffer implementation in ehci-hcd. It is now possible for an idle QH to have some URBs on its queue -- this will happen if a Clear-TT-Buffer is pending for the QH's endpoint. Consequently we should not issue a warning when someone tries to unlink an URB from an idle QH; instead we should process the request immediately. The refcounts for QHs could get messed up, because submit_async() would increment the refcount when calling qh_link_async() and qh_link_async() would then refuse to link the QH into the schedule if a Clear-TT-Buffer was pending. Instead we should increment the refcount only when the QH actually is added to the schedule. The current code tries to be clever by leaving the refcount alone if an unlink is immediately followed by a relink; the patch changes this to an unconditional decrement and increment (although they occur in the opposite order). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Tested-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-31 22:40:22 +08:00
/* QH might be waiting for a Clear-TT-Buffer */
qh_completions(ehci, qh);
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
done:
spin_unlock_irqrestore (&ehci->lock, flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 23:48:02 +08:00
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*-------------------------------------------------------------------------*/
// bulk qh holds the data toggle
static void
ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
unsigned long flags;
USB: EHCI: improve ehci_endpoint_disable The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 22:53:09 +08:00
struct ehci_qh *qh;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ASSERT: any requests/urbs are being unlinked */
/* ASSERT: nobody can be submitting urbs for this any more */
rescan:
spin_lock_irqsave (&ehci->lock, flags);
qh = ep->hcpriv;
if (!qh)
goto done;
/* endpoints can be iso streams. for now, we don't
* accelerate iso completions ... so spin a while.
*/
USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh The EHCI driver stores in usb_host_endpoint.hcpriv a pointer to either an ehci_qh or an ehci_iso_stream structure, and uses the contents of the hw_info1 field to distinguish the two cases. After ehci_qh was split into hw and sw parts, ehci_iso_stream must also be adjusted so that it again looks like an ehci_qh structure. This fixes a NULL pointer access in ehci_endpoint_disable() when it tries to access qh->hw->hw_info1. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 00:18:56 +08:00
if (qh->hw == NULL) {
USB: EHCI: don't refcount iso_stream structures This patch (as1580) makes ehci_iso_stream structures behave more like QHs, in that they will remain allocated until their isochronous endpoint is disabled. This will come in useful in the future, when periodic bandwidth gets allocated as an altsetting is installed rather than on-the-fly. For now, the change to the ehci_iso_stream lifetimes means that each structure is always deallocated at exactly one spot in ehci_endpoint_disable() and never used again. As a result, it is no longer necessary to use reference counting on these things, and the patch removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:39 +08:00
struct ehci_iso_stream *stream = ep->hcpriv;
if (!list_empty(&stream->td_list))
goto idle_timeout;
/* BUG_ON(!list_empty(&stream->free_list)); */
kfree(stream);
goto done;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
USB: EHCI: split needs_rescan into two flags This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:11 +08:00
qh->exception = 1;
USB: EHCI: add new root-hub state: STOPPING This patch (as1571) adds a new state for ehci-hcd's root hubs: EHCI_RH_STOPPING. This value is used at times when the root hub is being stopped and we don't know whether or not the hardware has finished all its DMA yet. Although the purpose may not be apparent, this distinction will come in useful later on. Future patches will avoid actions that depend on the root hub being operational (like turning on the async or periodic schedules) when they see the state is EHCI_RH_STOPPING. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:48 +08:00
if (ehci->rh_state < EHCI_RH_RUNNING)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
qh->qh_state = QH_STATE_IDLE;
switch (qh->qh_state) {
case QH_STATE_LINKED:
USB: EHCI: improve ehci_endpoint_disable The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 22:53:09 +08:00
WARN_ON(!list_empty(&qh->qtd_list));
if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT)
USB: EHCI: unlink multiple async QHs together This patch (as1582) changes ehci-hcd's strategy for unlinking async QHs. Currently the driver never unlinks more than one QH at a time. This can be inefficient and cause unnecessary delays, since a QH cannot be reused while it is waiting to be unlinked. The new strategy unlinks all the waiting QHs at once. In practice the improvement won't be very big, because it's somewhat uncommon to have two or more QHs waiting to be unlinked at any time. But it does happen, and in any case, doing things this way makes more sense IMO. The change requires the async unlinking code to be refactored slightly. Now in addition to the routines for starting and ending an unlink, there are new routines for unlinking a single QH and starting an IAA cycle. This approach is needed because there are two separate paths for unlinking async QHs: When a transfer error occurs or an URB is cancelled, the QH must be unlinked right away; When a QH has been idle sufficiently long, it is unlinked to avoid consuming DMA bandwidth uselessly. In the first case we want the unlink to proceed as quickly as possible, whereas in the second case we can afford to batch several QHs together and unlink them all at once. Hence the division of labor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:49 +08:00
start_unlink_async(ehci, qh);
USB: EHCI: improve ehci_endpoint_disable The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 22:53:09 +08:00
else
start_unlink_intr(ehci, qh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* FALL THROUGH */
USB: EHCI: improve ehci_endpoint_disable The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 22:53:09 +08:00
case QH_STATE_COMPLETING: /* already in unlinking */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case QH_STATE_UNLINK: /* wait for hw to finish? */
USB: EHCI: add separate IAA watchdog timer This patch (as1028) was mostly written by David Brownell; I made only a few changes (extra log info and a small bug fix -- which might account for why David's version had to be reverted). It adds a new watchdog timer to the ehci-hcd driver to be used exclusively for detecting lost or missing IAA notifications. Previously a shared timer had been used, which may have led to some problems as reported by Christian Hoffmann. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-12 05:05:30 +08:00
case QH_STATE_UNLINK_WAIT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
idle_timeout:
spin_unlock_irqrestore (&ehci->lock, flags);
[PATCH] drivers/usb: fix-up schedule_timeout() usage Description: Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-16 02:30:11 +08:00
schedule_timeout_uninterruptible(1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
USB: EHCI: use the new clear_tt_buffer interface This patch (as1256) changes ehci-hcd and all the other drivers in the EHCI family to make use of the new clear_tt_buffer callbacks. When a Clear-TT-Buffer request is in progress for a QH, the QH is not allowed to be linked into the async schedule until the request is finished. At that time, if there are any URBs queued for the QH, it is linked into the async schedule. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-29 22:47:30 +08:00
if (qh->clearing_tt)
goto idle_timeout;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (list_empty (&qh->qtd_list)) {
USB: EHCI: don't refcount QHs This patch (as1567) removes ehci-hcd's reference counting of QH structures. It's not necessary to refcount these things because they always get deallocated at exactly one spot in ehci_endpoint_disable() (except for two special QHs, ehci->async and ehci->dummy) and are never used again. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:21:25 +08:00
qh_destroy(ehci, qh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
/* else FALL THROUGH */
default:
/* caller was supposed to have unlinked any requests;
* that's not our job. just leak this memory.
*/
ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
qh, ep->desc.bEndpointAddress, qh->qh_state,
list_empty (&qh->qtd_list) ? "" : "(has tds)");
break;
}
USB: EHCI: don't refcount iso_stream structures This patch (as1580) makes ehci_iso_stream structures behave more like QHs, in that they will remain allocated until their isochronous endpoint is disabled. This will come in useful in the future, when periodic bandwidth gets allocated as an altsetting is installed rather than on-the-fly. For now, the change to the ehci_iso_stream lifetimes means that each structure is always deallocated at exactly one spot in ehci_endpoint_disable() and never used again. As a result, it is no longer necessary to use reference counting on these things, and the patch removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:39 +08:00
done:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ep->hcpriv = NULL;
spin_unlock_irqrestore (&ehci->lock, flags);
}
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
static void
ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12 02:56:22 +08:00
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
unsigned long flags;
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12 02:56:22 +08:00
spin_lock_irqsave(&ehci->lock, flags);
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
* in the hardware; the toggle bits in udev aren't used at all.
* When an endpoint is reset by usb_clear_halt() we must reset
* the toggle bit in the QH.
*/
if (qh) {
USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12 02:56:22 +08:00
usb_settoggle(qh->dev, epnum, is_out, 0);
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
USB: EHCI: split needs_rescan into two flags This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:11 +08:00
} else {
USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12 02:56:22 +08:00
/* The toggle value in the QH can't be updated
* while the QH is active. Unlink it now;
* re-linking will call qh_refresh().
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
*/
USB: EHCI: split needs_rescan into two flags This patch (as1662) does some more QH-related cleanup in ehci-hcd. The qh->needs_rescan flag is currently used for two different purposes; the patch replaces it with two separate flags for greater clarity: qh->dequeue_during_giveback indicates that a completion handler dequeued an URB (implying that a rescan is needed), and qh->exception indicates that the QH is in an exceptional state requiring an unlink (either it encountered an I/O error or an unlink was requested). The new flags get set where the dequeue, exception, or unlink request occurred, rather than where the unlink is started. This is so that in the future, if we need to, we will be able to tell apart unlinks that truly were required from those that were carried out merely because the QH wasn't being used. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-23 01:31:11 +08:00
qh->exception = 1;
USB: EHCI: change deschedule logic for interrupt QHs This patch (as1281) changes the way ehci-hcd deschedules interrupt QHs, copying the approach used for async QHs. The caller is no longer responsible for rescheduling the QH if its queue is non-empty; instead the reschedule is done directly by intr_deschedule(), after calling qh_completions(). This is exactly the same as how end_unlink_async() works. ehci_urb_dequeue() and intr_deschedule() now correctly handle the case where they are called while another interrupt URB for the same QH is being given back. This was a surprisingly large blind spot. And scan_periodic() now respects the new needs_rescan flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-20 00:22:44 +08:00
if (eptype == USB_ENDPOINT_XFER_BULK)
USB: EHCI: unlink multiple async QHs together This patch (as1582) changes ehci-hcd's strategy for unlinking async QHs. Currently the driver never unlinks more than one QH at a time. This can be inefficient and cause unnecessary delays, since a QH cannot be reused while it is waiting to be unlinked. The new strategy unlinks all the waiting QHs at once. In practice the improvement won't be very big, because it's somewhat uncommon to have two or more QHs waiting to be unlinked at any time. But it does happen, and in any case, doing things this way makes more sense IMO. The change requires the async unlinking code to be refactored slightly. Now in addition to the routines for starting and ending an unlink, there are new routines for unlinking a single QH and starting an IAA cycle. This approach is needed because there are two separate paths for unlinking async QHs: When a transfer error occurs or an URB is cancelled, the QH must be unlinked right away; When a QH has been idle sufficiently long, it is unlinked to avoid consuming DMA bandwidth uselessly. In the first case we want the unlink to proceed as quickly as possible, whereas in the second case we can afford to batch several QHs together and unlink them all at once. Hence the division of labor. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:49 +08:00
start_unlink_async(ehci, qh);
USB: EHCI: change deschedule logic for interrupt QHs This patch (as1281) changes the way ehci-hcd deschedules interrupt QHs, copying the approach used for async QHs. The caller is no longer responsible for rescheduling the QH if its queue is non-empty; instead the reschedule is done directly by intr_deschedule(), after calling qh_completions(). This is exactly the same as how end_unlink_async() works. ehci_urb_dequeue() and intr_deschedule() now correctly handle the case where they are called while another interrupt URB for the same QH is being given back. This was a surprisingly large blind spot. And scan_periodic() now respects the new needs_rescan flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-20 00:22:44 +08:00
else
USB: EHCI: use hrtimer for interrupt QH unlink This patch (as1577) adds hrtimer support for unlinking interrupt QHs in ehci-hcd. The current code relies on a fixed delay of either 2 or 55 us, which is not always adequate and in any case is totally bogus. Thanks to internal caching, the EHCI hardware may continue to access an interrupt QH for more than a millisecond after it has been unlinked. In fact, the EHCI spec doesn't say how long to wait before using an unlinked interrupt QH. The patch sets the delay to 9 microframes minimum, which ought to be adequate. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:22:26 +08:00
start_unlink_intr(ehci, qh);
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
}
}
USB: EHCI: update toggle state for linked QHs This is an update to the "usb-ehci-update-toggle-state-for-linked-qhs" patch. Since an HCD's endpoint_reset method can be called in interrupt context, it mustn't assume that interrupts are enabled or that it can sleep. So we revert to the original way of refreshing QHs' toggle bits. Now the endpoint_reset method merely clears the toggle flag in the device structure (as was done before) and starts an async QH unlink. When the QH is linked again, after the unlink finishes and an URB is queued, the qh_refresh() routine will update the QH's toggle bit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: David <david@unsolicited.net> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12 02:56:22 +08:00
spin_unlock_irqrestore(&ehci->lock, flags);
USB: EHCI: update toggle state for linked QHs This patch (as1245) fixes a bug in ehci-hcd. When an URB is queued for an endpoint whose QH is already in the LINKED state, the QH doesn't get refreshed. As a result, if usb_clear_halt() was called during the time that the QH was linked but idle, the data toggle value in the QH doesn't get reset. The symptom is that after a clear_halt, data gets lost and transfers time out. This problem is starting to show up now because the "ehci-hcd unlink speedups" patch causes QHs with no queued URBs to remain linked for a suitable time. The patch utilizes the new endpoint_reset mechanism to fix the problem. When an endpoint is reset, the new method forcibly unlinks the QH (if necessary) and safely updates the toggle value. This allows qh_update() to be simplified and avoids using usb_device's toggle bits in a rather unintuitive way. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: David <david@unsolicited.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-28 06:21:56 +08:00
}
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
static int ehci_get_frame (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
EHCI: workaround for MosChip controller bug This patch (as1489) works around a hardware bug in MosChip EHCI controllers. Evidently when one of these controllers increments the frame-index register, it changes the three low-order bits (the microframe counter) before changing the higher order bits (the frame counter). If the register is read at just the wrong time, the value obtained is too low by 8. When the appropriate quirk flag is set, we work around this problem by reading the frame-index register a second time if the first value's three low-order bits are all 0. This gives the hardware a chance to finish updating the register, yielding the correct value. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Jason N Pitt <jpitt@fhcrc.org> CC: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-12 22:39:14 +08:00
return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
[PATCH] EHCI, split out PCI glue This splits BIOS and PCI specific support out of ehci-hcd.c into ehci-pci.c. It follows the model already used in the OHCI driver so support for non-PCI EHCI controllers can be more easily added. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/host/ehci-hcd.c | 543 ++++++-------------------------------------- drivers/usb/host/ehci-pci.c | 414 +++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 1 3 files changed, 492 insertions(+), 466 deletions(-)
2005-09-23 13:31:15 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*-------------------------------------------------------------------------*/
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
#ifdef CONFIG_PM
/* suspend/resume, section 4.3 */
/* These routines handle the generic parts of controller suspend/resume */
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (time_before(jiffies, ehci->next_statechange))
msleep(10);
/*
* Root hub was already suspended. Disable IRQ emission and
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
spin_lock_irq(&ehci->lock);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void) ehci_readl(ehci, &ehci->regs->intr_enable);
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
spin_unlock_irq(&ehci->lock);
return 0;
}
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
EXPORT_SYMBOL_GPL(ehci_suspend);
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
/* Returns 0 if power was preserved, 1 if power was lost */
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
int ehci_resume(struct usb_hcd *hcd, bool hibernated)
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (time_before(jiffies, ehci->next_statechange))
msleep(100);
/* Mark hardware accessible again as we are back to full power by now */
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
if (ehci->shutdown)
return 0; /* Controller is dead */
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
/*
* If CF is still set and we aren't resuming from hibernation
* then we maintained suspend power.
* Just undo the effect of ehci_suspend().
*/
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
!hibernated) {
int mask = INTR_MASK;
ehci_prepare_ports_for_controller_resume(ehci);
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
spin_lock_irq(&ehci->lock);
if (ehci->shutdown)
goto skip;
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
if (!hcd->self.root_hub->do_remote_wakeup)
mask &= ~STS_PCD;
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
ehci_readl(ehci, &ehci->regs->intr_enable);
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
skip:
spin_unlock_irq(&ehci->lock);
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
return 0;
}
/*
* Else reset, to cope with power loss or resume from hibernation
* having let the firmware kick in during reboot.
*/
usb_root_hub_lost_power(hcd->self.root_hub);
(void) ehci_halt(ehci);
(void) ehci_reset(ehci);
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
spin_lock_irq(&ehci->lock);
if (ehci->shutdown)
goto skip;
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
ehci_writel(ehci, ehci->command, &ehci->regs->command);
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
USB: EHCI: resolve some unlikely races This patch (as1589) resolves some unlikely races involving system shutdown or controller death in ehci-hcd: Shutdown races with both root-hub resume and controller resume. Controller death races with root-hub suspend. A new bitflag is added to indicate that the controller has been shut down (whether for system shutdown or because it died). Tests are added in the suspend and resume pathways to avoid reactivating the controller after any sort of shutdown. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-11 23:23:16 +08:00
ehci->rh_state = EHCI_RH_SUSPENDED;
spin_unlock_irq(&ehci->lock);
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
return 1;
}
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
EXPORT_SYMBOL_GPL(ehci_resume);
EHCI: centralize controller suspend/resume This patch (as1563) removes a lot of duplicated code by moving the EHCI controller suspend/resume routines into the core driver, where the various platform drivers can invoke them as needed. Not only does this simplify these platform drivers, this also makes it easier for other platform drivers to add suspend/resume support in the future. Note: The patch does not touch the ehci-fsl.c file, because its approach to suspend and resume is so different from all the others. It will have to be handled specially by its maintainer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-28 23:19:02 +08:00
#endif
/*-------------------------------------------------------------------------*/
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
/*
* Generic structure: This gets copied for platform drivers so that
* individual entries can be overridden as needed.
*/
static const struct hc_driver ehci_hc_driver = {
.description = hcd_name,
.product_desc = "EHCI Host Controller",
.hcd_priv_size = sizeof(struct ehci_hcd),
/*
* generic hardware linkage
*/
.irq = ehci_irq,
Revert "USB: EHCI: support running URB giveback in tasklet context" This reverts commit 428aac8a81058e2303677a8fbf26670229e51d3a. This isn't quite ready for 3.12, we need some more EHCI driver changes that are just now showing up. So revert this for now, and queue it up later for 3.13. Reported-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-13 04:58:42 +08:00
.flags = HCD_MEMORY | HCD_USB2,
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
/*
* basic lifecycle operations
*/
.reset = ehci_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
/*
* scheduling support
*/
.get_frame_number = ehci_get_frame,
/*
* root hub support
*/
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
};
void ehci_init_driver(struct hc_driver *drv,
const struct ehci_driver_overrides *over)
{
/* Copy the generic table to drv and then apply the overrides */
*drv = ehci_hc_driver;
USB: EHCI: miscellaneous cleanups for the library conversion This patch (as1630) cleans up a few minor items resulting from the split-up of the ehci-hcd driver: Remove the product_desc string from the ehci_driver_overrides structure. All drivers will use the generic "EHCI Host Controller" string. (This was requested by Felipe Balbi.) Allow drivers to pass a NULL pointer to ehci_init_driver() if they don't have to override any settings. Remove a #define symbol that is no longer used from the ChipIdea host driver. Rename overrides to pci_overrides in ehci-pci.c, for consistency with ehci-platform.c. Mark the *_overrides structures as __initdata. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-08 05:12:47 +08:00
if (over) {
drv->hcd_priv_size += over->extra_priv_size;
if (over->reset)
drv->reset = over->reset;
}
USB: EHCI: prepare to make ehci-hcd a library module This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01 23:12:58 +08:00
}
EXPORT_SYMBOL_GPL(ehci_init_driver);
/*-------------------------------------------------------------------------*/
USB: EHCI, OHCI, UHCI: remove version numbers This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:47:15 +08:00
MODULE_DESCRIPTION(DRIVER_DESC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
USB: ehci_fsl update for MPC831x support For MPC831x support, change the ehci-fsl driver to preserve bits set in platform code. Add a common CONFIG_USB_EHCI_FSL to indicate presence of Freescale EHCI SOC. Add FSL_USB2_DR_OTG operating mode support, thus both host and device can work for the mini-ab receptacle. Note: this doesn't enable OTG protocol support. Signed-off-by: Li Yang <leoli@freescale.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-11 17:09:55 +08:00
#ifdef CONFIG_USB_EHCI_FSL
[PATCH] USB: EHCI for Freescale 83xx Adding a Host Mode USB driver for the Freescale 83xx. This driver supports both the Dual-Role (DR) controller and the Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has been tested with the MPC8349CDS reference system. This driver depends on platform support code for setting up the pins on the device package in a manner appropriate for the board in use. Note that this patch requires selecting the EHCI controller option under the USB Host menu. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-21 05:53:38 +08:00
#include "ehci-fsl.c"
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
#define PLATFORM_DRIVER ehci_fsl_driver
[PATCH] USB: EHCI for Freescale 83xx Adding a Host Mode USB driver for the Freescale 83xx. This driver supports both the Dual-Role (DR) controller and the Multi-Port-Host (MPH) controller present in the Freescale MPC8349. It has been tested with the MPC8349CDS reference system. This driver depends on platform support code for setting up the pins on the device package in a manner appropriate for the board in use. Note that this patch requires selecting the EHCI controller option under the USB Host menu. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-21 05:53:38 +08:00
#endif
usb: EHCI, OHCI: Add configuration for the SH USB controller The SH EHCI/OHCI driver hardcoded the CPU type in {ehci,ohci}-hcd.c. So if we will add the new CPU, we had to add to the hcd driver each time. The patch adds the CONFIG_USB_{EHCI,OHCI}_SH configuration. So if we want to use the SH EHCI/OHCI, we only enable the configuration. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-01 15:58:37 +08:00
#ifdef CONFIG_USB_EHCI_SH
usb: ehci-hcd: Add support for SuperH EHCI. This adds a trivial stub for supporting EHCI mode of the on-chip SH USB host controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-02 05:03:27 +08:00
#include "ehci-sh.c"
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#ifdef CONFIG_PPC_PS3
#include "ehci-ps3.c"
USB: PS3: USB system-bus rework USB HCD glue updates to reflect the new PS3 unifed device support. - Fixed remove() routine. - Added shutdown() routine. - Added request_mem_region() call. - Fixed MODULE_ALIAS(). - Made a proper fix for the hack done to support muti-platform in commit 48fda45120a819ca40cadc50144b55bff1c4c78d. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-06 11:04:35 +08:00
#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
#include "ehci-ppc-of.c"
#define OF_PLATFORM_DRIVER ehci_hcd_ppc_of_driver
#endif
USB: Add support for Xilinx USB host controller Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: Julie Zhu <julie.zhu@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-22 06:08:19 +08:00
#ifdef CONFIG_XPS_USB_HCD_XILINX
#include "ehci-xilinx-of.c"
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
#define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver
USB: Add support for Xilinx USB host controller Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: Julie Zhu <julie.zhu@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-22 06:08:19 +08:00
#endif
USB: Add nuvoton Ehci driver for w90p910 platform Add ehci support for w90p910 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-13 09:14:28 +08:00
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
#endif
USB: Add EHCI and OHCH glue for OCTEON II SOCs. The OCTEON II SOC has USB EHCI and OHCI controllers connected directly to the internal I/O bus. This patch adds the necessary 'glue' logic to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II. The OCTEON normally runs big-endian, and the ehci/ohci internal registers have host endianness, so we need to select USB_EHCI_BIG_ENDIAN_MMIO. The ehci and ohci blocks share a common clocking and PHY infrastructure. Initialization of the host controller and PHY clocks is common between the two and is factored out into the octeon2-common.c file. Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in arch/mips/Kconfig in a following patch. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-usb@vger.kernel.org To: dbrownell@users.sourceforge.net Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-09 05:47:52 +08:00
#ifdef CONFIG_USB_OCTEON_EHCI
#include "ehci-octeon.c"
#define PLATFORM_DRIVER ehci_octeon_driver
#endif
usb: add host support for the tilegx architecture This change adds OHCI and EHCI support for the tilegx's on-chip USB hardware. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-10 01:58:14 +08:00
#ifdef CONFIG_TILE_USB
#include "ehci-tilegx.c"
#define PLATFORM_DRIVER ehci_hcd_tilegx_driver
#endif
USB: EHCI bus glue for on-chip PMC MSP USB controller This patch add bus glue for USB controller commonly found in PMC-Sierra MSP71xx family of SoC's. Signed-off-by: Anoop P A <anoop.pa@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 21:56:28 +08:00
#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP
#include "ehci-pmcmsp.c"
#define PLATFORM_DRIVER ehci_hcd_msp_driver
#endif
USB: EHCI: Add bus glue for GRLIB GRUSBHC controller This patch adds support for the GRLIB GRUSBHC EHCI controller from Aeroflex Gaisler. The controller is typically found on LEON/GRLIB SoCs. Tested on GR-LEON4-ITX with with little endian interface and on LEON3 system on GR-PCI-XC5V development board for big endian controller. Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-04 02:11:58 +08:00
#ifdef CONFIG_SPARC_LEON
#include "ehci-grlib.c"
#define PLATFORM_DRIVER ehci_grlib_driver
#endif
USB: EHCI: Add Marvell Host Controller driver This patch adds support for EHCI compliant HSUSB Host controller found on Marvell Socs. It fits both OTG and SPH controller on marvell Socs, including PXA9xx/MMP2/MMP3/MGx. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 13:20:23 +08:00
#ifdef CONFIG_USB_EHCI_MV
#include "ehci-mv.c"
#define PLATFORM_DRIVER ehci_mv_driver
#endif
USB: Add EHCI bus glue for Loongson1x SoCs (UPDATED) Use ehci_setup() in ehci_ls1x_reset(). The Loongson1x SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-18 14:41:16 +08:00
usb: host: mips: sead3: USB Host controller support for SEAD-3 platform. Add EHCI driver for MIPS SEAD-3 development platform. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 01:57:31 +08:00
#ifdef CONFIG_MIPS_SEAD3
#include "ehci-sead3.c"
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
static int __init ehci_hcd_init(void)
{
int retval = 0;
USB: EHCI, OHCI, UHCI: remove version numbers This patch (as1145) removes the essentially useless driver-version strings from ehci-hcd, ohci-hcd, and uhci-hcd. It also unifies the form of the banner lines they display upon loading and adds a missing test for usb_disabled() to ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:47:15 +08:00
if (usb_disabled())
return -ENODEV;
printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
" before uhci_hcd and ohci_hcd, not after\n");
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
hcd_name,
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29 16:45:13 +08:00
#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
USB: EHCI: use the new usb debugfs directory All usb debugfs files should be behind the usb directory, not at the root of debugfs. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-25 06:13:18 +08:00
ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
if (!ehci_debug_root) {
retval = -ENOENT;
goto err_debug;
}
USB: convert ehci debug files to use debugfs instead of sysfs We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-12 05:07:31 +08:00
#endif
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
#ifdef PLATFORM_DRIVER
retval = platform_driver_register(&PLATFORM_DRIVER);
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
if (retval < 0)
goto clean0;
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
#endif
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#ifdef PS3_SYSTEM_BUS_DRIVER
USB: PS3: USB system-bus rework USB HCD glue updates to reflect the new PS3 unifed device support. - Fixed remove() routine. - Added shutdown() routine. - Added request_mem_region() call. - Fixed MODULE_ALIAS(). - Made a proper fix for the hack done to support muti-platform in commit 48fda45120a819ca40cadc50144b55bff1c4c78d. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-06 11:04:35 +08:00
retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER);
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
if (retval < 0)
goto clean2;
USB: convert ehci debug files to use debugfs instead of sysfs We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-12 05:07:31 +08:00
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#ifdef OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
retval = platform_driver_register(&OF_PLATFORM_DRIVER);
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
if (retval < 0)
goto clean3;
#endif
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
#ifdef XILINX_OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
retval = platform_driver_register(&XILINX_OF_PLATFORM_DRIVER);
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
if (retval < 0)
goto clean4;
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
return retval;
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
#ifdef XILINX_OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
/* platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER); */
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
clean4:
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#ifdef OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
platform_driver_unregister(&OF_PLATFORM_DRIVER);
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
clean3:
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
clean2:
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
clean0:
#endif
ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29 16:45:13 +08:00
#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
debugfs_remove(ehci_debug_root);
ehci_debug_root = NULL;
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
err_debug:
USB: Fix unused label warnings in drivers/usb/host/ehci-hcd.c This gets rid of an annoying warning in ehci-hcd.c when DEBUG isn't enabled: warning: label 'err_debug' defined but not used by moving it inside the already-existing #ifdef DEBUG, so that it matches the goto. And now my regular build is warning-free again. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-21 05:23:29 +08:00
#endif
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
return retval;
}
module_init(ehci_hcd_init);
static void __exit ehci_hcd_cleanup(void)
{
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
#ifdef XILINX_OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
platform_driver_unregister(&XILINX_OF_PLATFORM_DRIVER);
usb: fix ehci_hcd build failure when both generic-OF and xilinx is selected This patch fixes the driver to allow both CONFIG_USB_EHCI_HCD_PPC_OF and CONFIG_USB_ECHI_HCD_XILINX to be selected. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: John Linn <john.linn@xilinx.com> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-03 03:53:17 +08:00
#endif
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#ifdef OF_PLATFORM_DRIVER
dt/usb: Eliminate users of of_platform_{,un}register_driver Get rid of users of of_platform_driver in drivers/usb. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23 12:08:34 +08:00
platform_driver_unregister(&OF_PLATFORM_DRIVER);
USB: add ehci-ppc-of bus glue (device-tree aware) This adds device-tree-aware ehci-ppc-of driver. The code is based on the ehci-ppc-soc driver by Stefan Roese <sr@denx.de>. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-31 07:28:50 +08:00
#endif
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#ifdef PS3_SYSTEM_BUS_DRIVER
USB: PS3: USB system-bus rework USB HCD glue updates to reflect the new PS3 unifed device support. - Fixed remove() routine. - Added shutdown() routine. - Added request_mem_region() call. - Fixed MODULE_ALIAS(). - Made a proper fix for the hack done to support muti-platform in commit 48fda45120a819ca40cadc50144b55bff1c4c78d. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-06 11:04:35 +08:00
ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
USB: ps3 ehci bus glue USB EHCI driver bus glue for the PS3 game console. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-01-16 12:11:47 +08:00
#endif
ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29 16:45:13 +08:00
#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG)
USB: convert ehci debug files to use debugfs instead of sysfs We should not have multiple line files in sysfs, this moves the data to debugfs instead, like the UHCI driver. Signed-off-by: Tony Jones <tonyj@suse.de> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-12 05:07:31 +08:00
debugfs_remove(ehci_debug_root);
#endif
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 23:48:13 +08:00
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
[PATCH] USB: allow multiple types of EHCI controllers to be built as modules In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-11 23:07:16 +08:00
}
module_exit(ehci_hcd_cleanup);