linux-sg2042/arch/mips/math-emu/ieee754int.h

161 lines
4.1 KiB
C
Raw Normal View History

/*
* IEEE754 floating point
* common internal header file
*/
/*
* MIPS floating point support
* Copyright (C) 1994-2000 Algorithmics Ltd.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __IEEE754INT_H
#define __IEEE754INT_H
#include "ieee754.h"
#define CLPAIR(x, y) ((x)*6+(y))
enum maddf_flags {
MADDF_NEGATE_PRODUCT = 1 << 0,
};
static inline void ieee754_clearcx(void)
{
ieee754_csr.cx = 0;
}
static inline void ieee754_setcx(const unsigned int flags)
{
ieee754_csr.cx |= flags;
ieee754_csr.sx |= flags;
}
static inline int ieee754_setandtestcx(const unsigned int x)
{
ieee754_setcx(x);
return ieee754_csr.mx & x;
}
static inline int ieee754_class_nan(int xc)
{
return xc >= IEEE754_CLASS_SNAN;
}
#define COMPXSP \
unsigned int xm; int xe; int xs __maybe_unused; int xc
#define COMPYSP \
unsigned int ym; int ye; int ys; int yc
#define COMPZSP \
unsigned int zm; int ze; int zs; int zc
#define EXPLODESP(v, vc, vs, ve, vm) \
{ \
vs = SPSIGN(v); \
ve = SPBEXP(v); \
vm = SPMANT(v); \
if (ve == SP_EMAX+1+SP_EBIAS) { \
if (vm == 0) \
vc = IEEE754_CLASS_INF; \
MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulation Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-13 08:47:28 +08:00
else if (ieee754_csr.nan2008 ^ !(vm & SP_MBIT(SP_FBITS - 1))) \
vc = IEEE754_CLASS_QNAN; \
MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulation Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-13 08:47:28 +08:00
else \
vc = IEEE754_CLASS_SNAN; \
} else if (ve == SP_EMIN-1+SP_EBIAS) { \
if (vm) { \
ve = SP_EMIN; \
vc = IEEE754_CLASS_DNORM; \
} else \
vc = IEEE754_CLASS_ZERO; \
} else { \
ve -= SP_EBIAS; \
vm |= SP_HIDDEN_BIT; \
vc = IEEE754_CLASS_NORM; \
} \
}
#define EXPLODEXSP EXPLODESP(x, xc, xs, xe, xm)
#define EXPLODEYSP EXPLODESP(y, yc, ys, ye, ym)
#define EXPLODEZSP EXPLODESP(z, zc, zs, ze, zm)
#define COMPXDP \
u64 xm; int xe; int xs __maybe_unused; int xc
#define COMPYDP \
u64 ym; int ye; int ys; int yc
#define COMPZDP \
u64 zm; int ze; int zs; int zc
#define EXPLODEDP(v, vc, vs, ve, vm) \
{ \
vm = DPMANT(v); \
vs = DPSIGN(v); \
ve = DPBEXP(v); \
if (ve == DP_EMAX+1+DP_EBIAS) { \
if (vm == 0) \
vc = IEEE754_CLASS_INF; \
MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulation Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-13 08:47:28 +08:00
else if (ieee754_csr.nan2008 ^ !(vm & DP_MBIT(DP_FBITS - 1))) \
vc = IEEE754_CLASS_QNAN; \
MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulation Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-11-13 08:47:28 +08:00
else \
vc = IEEE754_CLASS_SNAN; \
} else if (ve == DP_EMIN-1+DP_EBIAS) { \
if (vm) { \
ve = DP_EMIN; \
vc = IEEE754_CLASS_DNORM; \
} else \
vc = IEEE754_CLASS_ZERO; \
} else { \
ve -= DP_EBIAS; \
vm |= DP_HIDDEN_BIT; \
vc = IEEE754_CLASS_NORM; \
} \
}
#define EXPLODEXDP EXPLODEDP(x, xc, xs, xe, xm)
#define EXPLODEYDP EXPLODEDP(y, yc, ys, ye, ym)
#define EXPLODEZDP EXPLODEDP(z, zc, zs, ze, zm)
#define FLUSHDP(v, vc, vs, ve, vm) \
if (vc==IEEE754_CLASS_DNORM) { \
if (ieee754_csr.nod) { \
ieee754_setcx(IEEE754_INEXACT); \
vc = IEEE754_CLASS_ZERO; \
ve = DP_EMIN-1+DP_EBIAS; \
vm = 0; \
v = ieee754dp_zero(vs); \
} \
}
#define FLUSHSP(v, vc, vs, ve, vm) \
if (vc==IEEE754_CLASS_DNORM) { \
if (ieee754_csr.nod) { \
ieee754_setcx(IEEE754_INEXACT); \
vc = IEEE754_CLASS_ZERO; \
ve = SP_EMIN-1+SP_EBIAS; \
vm = 0; \
v = ieee754sp_zero(vs); \
} \
}
#define FLUSHXDP FLUSHDP(x, xc, xs, xe, xm)
#define FLUSHYDP FLUSHDP(y, yc, ys, ye, ym)
#define FLUSHZDP FLUSHDP(z, zc, zs, ze, zm)
#define FLUSHXSP FLUSHSP(x, xc, xs, xe, xm)
#define FLUSHYSP FLUSHSP(y, yc, ys, ye, ym)
#define FLUSHZSP FLUSHSP(z, zc, zs, ze, zm)
#endif /* __IEEE754INT_H */