linux-sg2042/include/linux/dmar.h

160 lines
4.3 KiB
C
Raw Normal View History

Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:41 +08:00
/*
* Copyright (c) 2006, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
* Copyright (C) Ashok Raj <ashok.raj@intel.com>
* Copyright (C) Shaohua Li <shaohua.li@intel.com>
*/
#ifndef __DMAR_H__
#define __DMAR_H__
#include <linux/acpi.h>
#include <linux/types.h>
#include <linux/msi.h>
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:41 +08:00
#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
struct intel_iommu;
struct dmar_drhd_unit {
struct list_head list; /* list of drhd units */
struct acpi_dmar_header *hdr; /* ACPI header */
u64 reg_base_addr; /* register base address*/
struct pci_dev **devices; /* target device array */
int devices_cnt; /* target device count */
u8 ignored:1; /* ignore drhd */
u8 include_all:1;
struct intel_iommu *iommu;
};
extern struct list_head dmar_drhd_units;
#define for_each_drhd_unit(drhd) \
list_for_each_entry(drhd, &dmar_drhd_units, list)
extern int dmar_table_init(void);
extern int early_dmar_detect(void);
extern int dmar_dev_scope_init(void);
/* Intel IOMMU detection */
extern void detect_intel_iommu(void);
extern int parse_ioapics_under_ir(void);
extern int alloc_iommu(struct dmar_drhd_unit *);
#else
static inline void detect_intel_iommu(void)
{
return;
}
static inline int dmar_table_init(void)
{
return -ENODEV;
}
#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */
#ifdef CONFIG_INTR_REMAP
extern int intr_remapping_enabled;
extern int enable_intr_remapping(int);
struct irte {
union {
struct {
__u64 present : 1,
fpd : 1,
dst_mode : 1,
redir_hint : 1,
trigger_mode : 1,
dlvry_mode : 3,
avail : 4,
__reserved_1 : 4,
vector : 8,
__reserved_2 : 8,
dest_id : 32;
};
__u64 low;
};
union {
struct {
__u64 sid : 16,
sq : 2,
svt : 2,
__reserved_3 : 44;
};
__u64 high;
};
};
extern int get_irte(int irq, struct irte *entry);
extern int modify_irte(int irq, struct irte *irte_modified);
extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
u16 sub_handle);
extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
extern int clear_irte_irq(int irq, struct intel_iommu *iommu, u16 index);
extern int flush_irte(int irq);
extern int free_irte(int irq);
extern int irq_remapped(int irq);
extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
x64, x2apic/intr-remap: IO-APIC support for interrupt-remapping IO-APIC support in the presence of interrupt-remapping infrastructure. IO-APIC RTE will be programmed with interrupt-remapping table entry(IRTE) index and the IRTE will contain information about the vector, cpu destination, trigger mode etc, which traditionally was present in the IO-APIC RTE. Introduce a new irq_chip for cleaner irq migration (in the process context as opposed to the current irq migration in the context of an interrupt. interrupt-remapping infrastructure will help us achieve this cleanly). For edge triggered, irq migration is a simple atomic update(of vector and cpu destination) of IRTE and flush the hardware cache. For level triggered, we need to modify the io-apic RTE aswell with the update vector information, along with modifying IRTE with vector and cpu destination. So irq migration for level triggered is little bit more complex compared to edge triggered migration. But the good news is, we use the same algorithm for level triggered migration as we have today, only difference being, we now initiate the irq migration from process context instead of the interrupt context. In future, when we do a directed EOI (combined with cpu EOI broadcast suppression) to the IO-APIC, level triggered irq migration will also be as simple as edge triggered migration and we can do the irq migration with a simple atomic update to IO-APIC RTE. TBD: some tests/changes needed in the presence of fixup_irqs() for level triggered irq migration. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: akpm@linux-foundation.org Cc: arjan@linux.intel.com Cc: andi@firstfloor.org Cc: ebiederm@xmission.com Cc: jbarnes@virtuousgeek.org Cc: steiner@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 02:16:56 +08:00
extern struct intel_iommu *map_ioapic_to_ir(int apic);
#else
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
#define intr_remapping_enabled (0)
#endif
#ifdef CONFIG_DMAR
extern const char *dmar_get_fault_reason(u8 fault_reason);
/* Can't use the common MSI interrupt functions
* since DMAR is not a pci device
*/
extern void dmar_msi_unmask(unsigned int irq);
extern void dmar_msi_mask(unsigned int irq);
extern void dmar_msi_read(int irq, struct msi_msg *msg);
extern void dmar_msi_write(int irq, struct msi_msg *msg);
extern int dmar_set_interrupt(struct intel_iommu *iommu);
extern int arch_setup_dmar_msi(unsigned int irq);
extern int iommu_detected, no_iommu;
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:41 +08:00
extern struct list_head dmar_rmrr_units;
struct dmar_rmrr_unit {
struct list_head list; /* list of rmrr units */
struct acpi_dmar_header *hdr; /* ACPI header */
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:41 +08:00
u64 base_address; /* reserved base address*/
u64 end_address; /* reserved end address */
struct pci_dev **devices; /* target devices */
int devices_cnt; /* target device count */
};
#define for_each_rmrr_units(rmrr) \
list_for_each_entry(rmrr, &dmar_rmrr_units, list)
/* Intel DMAR initialization functions */
extern int intel_iommu_init(void);
extern int dmar_disabled;
#else
static inline int intel_iommu_init(void)
{
#ifdef CONFIG_INTR_REMAP
return dmar_dev_scope_init();
#else
return -ENODEV;
#endif
}
#endif /* !CONFIG_DMAR */
Intel IOMMU: DMAR detection and parsing logic This patch supports the upcomming Intel IOMMU hardware a.k.a. Intel(R) Virtualization Technology for Directed I/O Architecture and the hardware spec for the same can be found here http://www.intel.com/technology/virtualization/index.htm FAQ! (questions from akpm, answers from ak) > So... what's all this code for? > > I assume that the intent here is to speed things up under Xen, etc? Yes in some cases, but not this code. That would be the Xen version of this code that could potentially assign whole devices to guests. I expect this to be only useful in some special cases though because most hardware is not virtualizable and you typically want an own instance for each guest. Ok at some point KVM might implement this too; i likely would use this code for this. > Do we > have any benchmark results to help us to decide whether a merge would be > justified? The main advantage for doing it in the normal kernel is not performance, but more safety. Broken devices won't be able to corrupt memory by doing random DMA. Unfortunately that doesn't work for graphics yet, for that need user space interfaces for the X server are needed. There are some potential performance benefits too: - When you have a device that cannot address the complete address range an IOMMU can remap its memory instead of bounce buffering. Remapping is likely cheaper than copying. - The IOMMU can merge sg lists into a single virtual block. This could potentially speed up SG IO when the device is slow walking SG lists. [I long ago benchmarked 5% on some block benchmark with an old MPT Fusion; but it probably depends a lot on the HBA] And you get better driver debugging because unexpected memory accesses from the devices will cause a trappable event. > > Does it slow anything down? It adds more overhead to each IO so yes. This patch: Add support for early detection and parsing of DMAR's (DMA Remapping) reported to OS via ACPI tables. DMA remapping(DMAR) devices support enables independent address translations for Direct Memory Access(DMA) from Devices. These DMA remapping devices are reported via ACPI tables and includes pci device scope covered by these DMA remapping device. For detailed info on the specification of "Intel(R) Virtualization Technology for Directed I/O Architecture" please see http://www.intel.com/technology/virtualization/index.htm Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Ashok Raj <ashok.raj@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christoph Lameter <clameter@sgi.com> Cc: Greg KH <greg@kroah.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-22 07:41:41 +08:00
#endif /* __DMAR_H__ */