linux-sg2042/arch/alpha/kernel/sys_titan.c

421 lines
9.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/sys_titan.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996, 1999 Jay A Estabrook
* Copyright (C) 1998, 1999 Richard Henderson
* Copyright (C) 1999, 2000 Jeff Wiedemeier
*
* Code supporting TITAN systems (EV6+TITAN), currently:
* Privateer
* Falcon
* Granite
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_titan.h>
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
#include "err_impl.h"
/*
* Titan generic
*/
/*
* Titan supports up to 4 CPUs
*/
static unsigned long titan_cpu_irq_affinity[4] = { ~0UL, ~0UL, ~0UL, ~0UL };
/*
* Mask is set (1) if enabled
*/
static unsigned long titan_cached_irq_mask;
/*
* Need SMP-safe access to interrupt CSRs
*/
DEFINE_SPINLOCK(titan_irq_lock);
static void
titan_update_irq_hw(unsigned long mask)
{
register titan_cchip *cchip = TITAN_cchip;
unsigned long isa_enable = 1UL << 55;
register int bcpu = boot_cpuid;
#ifdef CONFIG_SMP
cpumask_t cpm;
volatile unsigned long *dim0, *dim1, *dim2, *dim3;
unsigned long mask0, mask1, mask2, mask3, dummy;
cpumask_copy(&cpm, cpu_present_mask);
mask &= ~isa_enable;
mask0 = mask & titan_cpu_irq_affinity[0];
mask1 = mask & titan_cpu_irq_affinity[1];
mask2 = mask & titan_cpu_irq_affinity[2];
mask3 = mask & titan_cpu_irq_affinity[3];
if (bcpu == 0) mask0 |= isa_enable;
else if (bcpu == 1) mask1 |= isa_enable;
else if (bcpu == 2) mask2 |= isa_enable;
else mask3 |= isa_enable;
dim0 = &cchip->dim0.csr;
dim1 = &cchip->dim1.csr;
dim2 = &cchip->dim2.csr;
dim3 = &cchip->dim3.csr;
if (!cpumask_test_cpu(0, &cpm)) dim0 = &dummy;
if (!cpumask_test_cpu(1, &cpm)) dim1 = &dummy;
if (!cpumask_test_cpu(2, &cpm)) dim2 = &dummy;
if (!cpumask_test_cpu(3, &cpm)) dim3 = &dummy;
*dim0 = mask0;
*dim1 = mask1;
*dim2 = mask2;
*dim3 = mask3;
mb();
*dim0;
*dim1;
*dim2;
*dim3;
#else
volatile unsigned long *dimB;
dimB = &cchip->dim0.csr;
if (bcpu == 1) dimB = &cchip->dim1.csr;
else if (bcpu == 2) dimB = &cchip->dim2.csr;
else if (bcpu == 3) dimB = &cchip->dim3.csr;
*dimB = mask | isa_enable;
mb();
*dimB;
#endif
}
static inline void
titan_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask |= 1UL << (irq - 16);
titan_update_irq_hw(titan_cached_irq_mask);
spin_unlock(&titan_irq_lock);
}
static inline void
titan_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask &= ~(1UL << (irq - 16));
titan_update_irq_hw(titan_cached_irq_mask);
spin_unlock(&titan_irq_lock);
}
static void
titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
{
int cpu;
for (cpu = 0; cpu < 4; cpu++) {
if (cpumask_test_cpu(cpu, &affinity))
titan_cpu_irq_affinity[cpu] |= 1UL << irq;
else
titan_cpu_irq_affinity[cpu] &= ~(1UL << irq);
}
}
static int
titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
titan_update_irq_hw(titan_cached_irq_mask);
spin_unlock(&titan_irq_lock);
return 0;
}
static void
titan_device_interrupt(unsigned long vector)
{
printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
}
static void
titan_srm_device_interrupt(unsigned long vector)
{
int irq;
irq = (vector - 0x800) >> 4;
handle_irq(irq);
}
static void __init
init_titan_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
irq_set_chip_and_handler(i, ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}
static struct irq_chip titan_irq_type = {
.name = "TITAN",
.irq_unmask = titan_enable_irq,
.irq_mask = titan_disable_irq,
.irq_mask_ack = titan_disable_irq,
.irq_set_affinity = titan_set_irq_affinity,
};
static irqreturn_t
titan_intr_nop(int irq, void *dev_id)
{
/*
* This is a NOP interrupt handler for the purposes of
* event counting -- just return.
*/
return IRQ_HANDLED;
}
static void __init
titan_init_irq(void)
{
if (alpha_using_srm && !alpha_mv.device_interrupt)
alpha_mv.device_interrupt = titan_srm_device_interrupt;
if (!alpha_mv.device_interrupt)
alpha_mv.device_interrupt = titan_device_interrupt;
titan_update_irq_hw(0);
init_titan_irqs(&titan_irq_type, 16, 63 + 16);
}
static void __init
titan_legacy_init_irq(void)
{
/* init the legacy dma controller */
outb(0, DMA1_RESET_REG);
outb(0, DMA2_RESET_REG);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
outb(0, DMA2_MASK_REG);
/* init the legacy irq controller */
init_i8259a_irqs();
/* init the titan irqs */
titan_init_irq();
}
void
titan_dispatch_irqs(u64 mask)
{
unsigned long vector;
/*
* Mask down to those interrupts which are enable on this processor
*/
mask &= titan_cpu_irq_affinity[smp_processor_id()];
/*
* Dispatch all requested interrupts
*/
while (mask) {
/* convert to SRM vector... priority is <63> -> <0> */
vector = 63 - __kernel_ctlz(mask);
mask &= ~(1UL << vector); /* clear it out */
vector = 0x900 + (vector << 4); /* convert to SRM vector */
/* dispatch it */
alpha_mv.device_interrupt(vector);
}
}
/*
* Titan Family
*/
static void __init
titan_request_irq(unsigned int irq, irq_handler_t handler,
unsigned long irqflags, const char *devname,
void *dev_id)
{
int err;
err = request_irq(irq, handler, irqflags, devname, dev_id);
if (err) {
printk("titan_request_irq for IRQ %d returned %d; ignoring\n",
irq, err);
}
}
static void __init
titan_late_init(void)
{
/*
* Enable the system error interrupts. These interrupts are
* all reported to the kernel as machine checks, so the handler
* is a nop so it can be called to count the individual events.
*/
titan_request_irq(63+16, titan_intr_nop, 0,
"CChip Error", NULL);
titan_request_irq(62+16, titan_intr_nop, 0,
"PChip 0 H_Error", NULL);
titan_request_irq(61+16, titan_intr_nop, 0,
"PChip 1 H_Error", NULL);
titan_request_irq(60+16, titan_intr_nop, 0,
"PChip 0 C_Error", NULL);
titan_request_irq(59+16, titan_intr_nop, 0,
"PChip 1 C_Error", NULL);
/*
* Register our error handlers.
*/
titan_register_error_handlers();
/*
* Check if the console left us any error logs.
*/
cdl_check_console_data_log();
}
static int
PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-10 22:30:21 +08:00
titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u8 intline;
int irq;
/* Get the current intline. */
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &intline);
irq = intline;
/* Is it explicitly routed through ISA? */
if ((irq & 0xF0) == 0xE0)
return irq;
/* Offset by 16 to make room for ISA interrupts 0 - 15. */
return irq + 16;
}
static void __init
titan_init_pci(void)
{
/*
* This isn't really the right place, but there's some init
* that needs to be done after everything is basically up.
*/
titan_late_init();
/* Indicate that we trust the console to configure things properly */
pci_set_flags(PCI_PROBE_ONLY);
common_init_pci();
SMC669_Init(0);
locate_and_init_vga(NULL);
}
/*
* Privateer
*/
static void __init
privateer_init_pci(void)
{
/*
* Hook a couple of extra err interrupts that the
* common titan code won't.
*/
titan_request_irq(53+16, titan_intr_nop, 0,
"NMI", NULL);
titan_request_irq(50+16, titan_intr_nop, 0,
"Temperature Warning", NULL);
/*
* Finish with the common version.
*/
return titan_init_pci();
}
/*
* The System Vectors.
*/
struct alpha_machine_vector titan_mv __initmv = {
.vector_name = "TITAN",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TITAN_IO,
.machine_check = titan_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TITAN_DAC_OFFSET,
.nr_irqs = 80, /* 64 + 16 */
/* device_interrupt will be filled in by titan_init_irq */
.agp_info = titan_agp_info,
.init_arch = titan_init_arch,
.init_irq = titan_legacy_init_irq,
.init_rtc = common_init_rtc,
.init_pci = titan_init_pci,
.kill_arch = titan_kill_arch,
.pci_map_irq = titan_map_irq,
.pci_swizzle = common_swizzle,
};
ALIAS_MV(titan)
struct alpha_machine_vector privateer_mv __initmv = {
.vector_name = "PRIVATEER",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_TITAN_IO,
.machine_check = privateer_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.pci_dac_offset = TITAN_DAC_OFFSET,
.nr_irqs = 80, /* 64 + 16 */
/* device_interrupt will be filled in by titan_init_irq */
.agp_info = titan_agp_info,
.init_arch = titan_init_arch,
.init_irq = titan_legacy_init_irq,
.init_rtc = common_init_rtc,
.init_pci = privateer_init_pci,
.kill_arch = titan_kill_arch,
.pci_map_irq = titan_map_irq,
.pci_swizzle = common_swizzle,
};
/* No alpha_mv alias for privateer since we compile it
in unconditionally with titan; setup_arch knows how to cope. */