hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/include/kvm/arm_pmu.h

124 lines
4.3 KiB
C
Raw Normal View History

arm64: KVM: Define PMU data structure for each vcpu Here we plan to support virtual PMU for guest by full software emulation, so define some basic structs and functions preparing for futher steps. Define struct kvm_pmc for performance monitor counter and struct kvm_pmu for performance monitor unit for each vcpu. According to ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS) counters. Since this only supports ARM64 (or PMUv3), add a separate config symbol for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 09:38:32 +08:00
/*
* Copyright (C) 2015 Linaro Ltd.
* Author: Shannon Zhao <shannon.zhao@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASM_ARM_KVM_PMU_H
#define __ASM_ARM_KVM_PMU_H
#include <linux/perf_event.h>
#include <asm/perf_event.h>
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
#define ARMV8_PMU_CYCLE_IDX (ARMV8_PMU_MAX_COUNTERS - 1)
arm64: KVM: fix build with CONFIG_ARM_PMU disabled When CONFIG_ARM_PMU is disabled, we get the following build error: arch/arm64/kvm/sys_regs.c: In function 'pmu_counter_idx_valid': arch/arm64/kvm/sys_regs.c:564:27: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/sys_regs.c:564:27: note: each undeclared identifier is reported only once for each function it appears in arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evcntr': arch/arm64/kvm/sys_regs.c:592:10: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) idx = ARMV8_PMU_CYCLE_IDX; ^ arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evtyper': arch/arm64/kvm/sys_regs.c:638:14: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx == ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/hyp/switch.c:86:15: error: 'ARMV8_PMU_USERENR_MASK' undeclared (first use in this function) write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); This patch fixes the build with CONFIG_ARM_PMU disabled. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-06-08 18:38:55 +08:00
#ifdef CONFIG_KVM_ARM_PMU
arm64: KVM: Define PMU data structure for each vcpu Here we plan to support virtual PMU for guest by full software emulation, so define some basic structs and functions preparing for futher steps. Define struct kvm_pmc for performance monitor counter and struct kvm_pmu for performance monitor unit for each vcpu. According to ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS) counters. Since this only supports ARM64 (or PMUv3), add a separate config symbol for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 09:38:32 +08:00
struct kvm_pmc {
u8 idx; /* index into the pmu->pmc array */
struct perf_event *perf_event;
u64 bitmask;
};
struct kvm_pmu {
int irq_num;
struct kvm_pmc pmc[ARMV8_PMU_MAX_COUNTERS];
bool ready;
KVM: arm64: Allow creating the PMU without the in-kernel GIC Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-02 19:41:02 +08:00
bool created;
arm64: KVM: Add PMU overflow interrupt routing When calling perf_event_create_kernel_counter to create perf_event, assign a overflow handler. Then when the perf event overflows, set the corresponding bit of guest PMOVSSET register. If this counter is enabled and its interrupt is enabled as well, kick the vcpu to sync the interrupt. On VM entry, if there is counter overflowed and interrupt level is changed, inject the interrupt with corresponding level. On VM exit, sync the interrupt level as well if it has been changed. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-26 19:29:19 +08:00
bool irq_level;
arm64: KVM: Define PMU data structure for each vcpu Here we plan to support virtual PMU for guest by full software emulation, so define some basic structs and functions preparing for futher steps. Define struct kvm_pmc for performance monitor counter and struct kvm_pmu for performance monitor unit for each vcpu. According to ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS) counters. Since this only supports ARM64 (or PMUv3), add a separate config symbol for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 09:38:32 +08:00
};
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
#define kvm_arm_pmu_v3_ready(v) ((v)->arch.pmu.ready)
arm64: KVM: Add a new vcpu device control group for PMUv3 To configure the virtual PMUv3 overflow interrupt number, we use the vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group. After configuring the PMUv3, call the vcpu ioctl with attribute KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 21:35:32 +08:00
#define kvm_arm_pmu_irq_initialized(v) ((v)->arch.pmu.irq_num >= VGIC_NR_SGIS)
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx);
void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val);
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu);
arm64: KVM: Reset PMU state when resetting vcpu When resetting vcpu, it needs to reset the PMU state to initial status. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 11:30:22 +08:00
void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu);
arm64: KVM: Free perf event of PMU when destroying vcpu When KVM frees VCPU, it needs to free the perf_event of PMU. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 15:18:05 +08:00
void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu);
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val);
void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val);
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
void kvm_pmu_overflow_set(struct kvm_vcpu *vcpu, u64 val);
arm64: KVM: Add PMU overflow interrupt routing When calling perf_event_create_kernel_counter to create perf_event, assign a overflow handler. Then when the perf event overflows, set the corresponding bit of guest PMOVSSET register. If this counter is enabled and its interrupt is enabled as well, kick the vcpu to sync the interrupt. On VM entry, if there is counter overflowed and interrupt level is changed, inject the interrupt with corresponding level. On VM exit, sync the interrupt level as well if it has been changed. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-26 19:29:19 +08:00
void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu);
void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu);
KVM: arm/arm64: Report PMU overflow interrupts to userspace irqchip When not using an in-kernel VGIC, but instead emulating an interrupt controller in userspace, we should report the PMU overflow status to that userspace interrupt controller using the KVM_CAP_ARM_USER_IRQ feature. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-02-01 19:51:52 +08:00
bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu);
void kvm_pmu_update_run(struct kvm_vcpu *vcpu);
arm64: KVM: Add access handler for PMSWINC register Add access handler which emulates writing and reading PMSWINC register and add support for creating software increment event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:49:39 +08:00
void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val);
arm64: KVM: Add helper to handle PMCR register bits According to ARMv8 spec, when writing 1 to PMCR.E, all counters are enabled by PMCNTENSET, while writing 0 to PMCR.E, all counters are disabled. When writing 1 to PMCR.P, reset all event counters, not including PMCCNTR, to zero. When writing 1 to PMCR.C, reset PMCCNTR to zero. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-28 12:10:30 +08:00
void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val);
arm64: KVM: PMU: Add perf event map and introduce perf event creating function When we use tools like perf on host, perf passes the event type and the id of this event type category to kernel, then kernel will map them to hardware event number and write this number to PMU PMEVTYPER<n>_EL0 register. When getting the event number in KVM, directly use raw event type to create a perf_event for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-03 14:27:25 +08:00
void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
u64 select_idx);
arm64: KVM: Add a new feature bit for PMUv3 To support guest PMUv3, use one bit of the VCPU INIT feature array. Initialize the PMU when initialzing the vcpu with that bit and PMU overflow interrupt set. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 22:46:15 +08:00
bool kvm_arm_support_pmu_v3(void);
arm64: KVM: Add a new vcpu device control group for PMUv3 To configure the virtual PMUv3 overflow interrupt number, we use the vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group. After configuring the PMUv3, call the vcpu ioctl with attribute KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 21:35:32 +08:00
int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
int kvm_arm_pmu_v3_get_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
KVM: arm64: Allow creating the PMU without the in-kernel GIC Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-02 19:41:02 +08:00
int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu);
arm64: KVM: Define PMU data structure for each vcpu Here we plan to support virtual PMU for guest by full software emulation, so define some basic structs and functions preparing for futher steps. Define struct kvm_pmc for performance monitor counter and struct kvm_pmu for performance monitor unit for each vcpu. According to ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS) counters. Since this only supports ARM64 (or PMUv3), add a separate config symbol for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 09:38:32 +08:00
#else
struct kvm_pmu {
};
arm64: KVM: Add access handler for PMCR register Add reset handler which gets host value of PMCR_EL0 and make writable bits architecturally UNKNOWN except PMCR.E which is zero. Add an access handler for PMCR. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-06-18 16:01:53 +08:00
#define kvm_arm_pmu_v3_ready(v) (false)
arm64: KVM: Add a new vcpu device control group for PMUv3 To configure the virtual PMUv3 overflow interrupt number, we use the vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group. After configuring the PMUv3, call the vcpu ioctl with attribute KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 21:35:32 +08:00
#define kvm_arm_pmu_irq_initialized(v) (false)
arm64: KVM: Add access handler for event counter register These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which is mapped to PMEVCNTRn. The access handler translates all aarch32 register offsets to aarch64 ones and uses vcpu_sys_reg() to access their values to avoid taking care of big endian. When reading these registers, return the sum of register value and the value perf event counts. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-08 15:29:06 +08:00
static inline u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu,
u64 select_idx)
{
return 0;
}
static inline void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu,
u64 select_idx, u64 val) {}
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
static inline u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
{
return 0;
}
arm64: KVM: Reset PMU state when resetting vcpu When resetting vcpu, it needs to reset the PMU state to initial status. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 11:30:22 +08:00
static inline void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu) {}
arm64: KVM: Free perf event of PMU when destroying vcpu When KVM frees VCPU, it needs to free the perf_event of PMU. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 15:18:05 +08:00
static inline void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) {}
arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMCNTENSET or PMCNTENCLR register. When writing to PMCNTENSET, call perf_event_enable to enable the perf event. When writing to PMCNTENCLR, call perf_event_disable to disable the perf event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 12:26:13 +08:00
static inline void kvm_pmu_disable_counter(struct kvm_vcpu *vcpu, u64 val) {}
static inline void kvm_pmu_enable_counter(struct kvm_vcpu *vcpu, u64 val) {}
arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use reset_unknown for its reset handler. Add a handler to emulate writing PMOVSSET or PMOVSCLR register. When writing non-zero value to PMOVSSET, the counter and its interrupt is enabled, kick this vcpu to sync PMU interrupt. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:03:26 +08:00
static inline void kvm_pmu_overflow_set(struct kvm_vcpu *vcpu, u64 val) {}
arm64: KVM: Add PMU overflow interrupt routing When calling perf_event_create_kernel_counter to create perf_event, assign a overflow handler. Then when the perf event overflows, set the corresponding bit of guest PMOVSSET register. If this counter is enabled and its interrupt is enabled as well, kick the vcpu to sync the interrupt. On VM entry, if there is counter overflowed and interrupt level is changed, inject the interrupt with corresponding level. On VM exit, sync the interrupt level as well if it has been changed. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-26 19:29:19 +08:00
static inline void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu) {}
static inline void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu) {}
KVM: arm/arm64: Report PMU overflow interrupts to userspace irqchip When not using an in-kernel VGIC, but instead emulating an interrupt controller in userspace, we should report the PMU overflow status to that userspace interrupt controller using the KVM_CAP_ARM_USER_IRQ feature. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-02-01 19:51:52 +08:00
static inline bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu)
{
return false;
}
static inline void kvm_pmu_update_run(struct kvm_vcpu *vcpu) {}
arm64: KVM: Add access handler for PMSWINC register Add access handler which emulates writing and reading PMSWINC register and add support for creating software increment event. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-08 15:49:39 +08:00
static inline void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val) {}
arm64: KVM: Add helper to handle PMCR register bits According to ARMv8 spec, when writing 1 to PMCR.E, all counters are enabled by PMCNTENSET, while writing 0 to PMCR.E, all counters are disabled. When writing 1 to PMCR.P, reset all event counters, not including PMCCNTR, to zero. When writing 1 to PMCR.C, reset PMCCNTR to zero. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-10-28 12:10:30 +08:00
static inline void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val) {}
arm64: KVM: PMU: Add perf event map and introduce perf event creating function When we use tools like perf on host, perf passes the event type and the id of this event type category to kernel, then kernel will map them to hardware event number and write this number to PMU PMEVTYPER<n>_EL0 register. When getting the event number in KVM, directly use raw event type to create a perf_event for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-07-03 14:27:25 +08:00
static inline void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu,
u64 data, u64 select_idx) {}
arm64: KVM: Add a new feature bit for PMUv3 To support guest PMUv3, use one bit of the VCPU INIT feature array. Initialize the PMU when initialzing the vcpu with that bit and PMU overflow interrupt set. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 22:46:15 +08:00
static inline bool kvm_arm_support_pmu_v3(void) { return false; }
arm64: KVM: Add a new vcpu device control group for PMUv3 To configure the virtual PMUv3 overflow interrupt number, we use the vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group. After configuring the PMUv3, call the vcpu ioctl with attribute KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-11 21:35:32 +08:00
static inline int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
return -ENXIO;
}
static inline int kvm_arm_pmu_v3_get_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
return -ENXIO;
}
static inline int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr)
{
return -ENXIO;
}
KVM: arm64: Allow creating the PMU without the in-kernel GIC Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-02 19:41:02 +08:00
static inline int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu)
{
return 0;
}
arm64: KVM: Define PMU data structure for each vcpu Here we plan to support virtual PMU for guest by full software emulation, so define some basic structs and functions preparing for futher steps. Define struct kvm_pmc for performance monitor counter and struct kvm_pmu for performance monitor unit for each vcpu. According to ARMv8 spec, the PMU contains at most 32(ARMV8_PMU_MAX_COUNTERS) counters. Since this only supports ARM64 (or PMUv3), add a separate config symbol for it. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-09-11 09:38:32 +08:00
#endif
#endif