linux-sg2042/drivers/ata/pata_acpi.c

283 lines
6.6 KiB
C
Raw Normal View History

/*
* ACPI PATA driver
*
* (c) 2007 Red Hat
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <acpi/acpi_bus.h>
#include <linux/libata.h>
#include <linux/ata.h>
#define DRV_NAME "pata_acpi"
#define DRV_VERSION "0.2.3"
struct pata_acpi {
struct ata_acpi_gtm gtm;
void *last;
unsigned long mask[2];
};
/**
* pacpi_pre_reset - check for 40/80 pin
* @ap: Port
* @deadline: deadline jiffies for the operation
*
* Perform the PATA port setup we need.
*/
static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pata_acpi *acpi = ap->private_data;
if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
return ata_sff_prereset(link, deadline);
}
/**
* pacpi_cable_detect - cable type detection
* @ap: port to detect
*
* Perform device specific cable detection
*/
static int pacpi_cable_detect(struct ata_port *ap)
{
struct pata_acpi *acpi = ap->private_data;
if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
* @mask: proposed modes
*
* Try the modes available and see which ones the ACPI method will
* set up sensibly. From this we get a mask of ACPI modes we can use
*/
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
struct pata_acpi *acpi = ap->private_data;
struct ata_acpi_gtm probe;
unsigned int xfer_mask;
probe = acpi->gtm;
ata_acpi_gtm(ap, &probe);
xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
ap->cbl = ATA_CBL_PATA80;
return xfer_mask;
}
/**
* pacpi_mode_filter - mode filter for ACPI
* @adev: device
* @mask: mask of valid modes
*
* Filter the valid mode list according to our own specific rules, in
* this case the list of discovered valid modes obtained by ACPI probing
*/
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
libata-sff: clean up BMDMA initialization When BMDMA initialization failed or BMDMA was not available for whatever reason, bmdma_addr was left at zero and used as an indication that BMDMA shouldn't be used. This leads to the following problems. p1. For BMDMA drivers which don't use traditional BMDMA register, ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those drivers either have to inherit from ata_sff_port_ops or clear ->mode_filter explicitly. p2. non-BMDMA drivers call into BMDMA PRD table allocation. It doesn't actually allocate PRD table if bmdma_addr is not initialized but is still confusing. p3. For BMDMA drivers which don't use traditional BMDMA register, some methods might not be invoked as expected (e.g. bmdma_stop from ata_sff_post_internal_cmd()). p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops worrying libata core might call into one of them. These problems are caused by the muddy line between SFF and BMDMA and the assumption that all BMDMA controllers initialize bmdma_addr. This patch fixes p1 and p2 by removing the bmdma_addr assumption and moving prd allocation to BMDMA port start. Later patches will fix the remaining issues. This patch improves BMDMA initialization such that * When BMDMA register initialization fails, falls back to PIO instead of failing. ata_pci_bmdma_init() never fails now. * When ata_pci_bmdma_init() falls back to PIO, it clears ap->mwdma_mask and udma_mask instead of depending on ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter() unnecessary thus resolving p1. * ata_port_start() which actually is BMDMA specific is moved to ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start() are killed. * ata_sff_port_start32() is moved and renamed to ata_bmdma_port_start32(). Drivers which no longer call into PRD table allocation are... pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all drivers which inherit from ata_sff_port_ops. pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD but is a BMDMA controller and doesn't have custom port_start like other such controllers. Note that with the previous patch which makes all and only BMDMA drivers inherit from ata_bmdma_port_ops, this change doesn't break drivers which need PRD table. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-11 03:41:34 +08:00
return mask & acpi->mask[adev->devno];
}
/**
* pacpi_set_piomode - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
*/
static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
t = ata_timing_find_mode(adev->pio_mode);
acpi->gtm.drive[unit].pio = t->cycle;
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
}
/**
* pacpi_set_dmamode - set initial DMA mode data
* @ap: ATA interface
* @adev: ATA device
*/
static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
t = ata_timing_find_mode(adev->dma_mode);
if (adev->dma_mode >= XFER_UDMA_0) {
acpi->gtm.drive[unit].dma = t->udma;
acpi->gtm.flags |= (1 << (2 * unit));
} else {
acpi->gtm.drive[unit].dma = t->cycle;
acpi->gtm.flags &= ~(1 << (2 * unit));
}
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
}
/**
* pacpi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* necessary.
*/
static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
return ata_bmdma_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
if (ata_dma_enabled(adev))
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
return ata_bmdma_qc_issue(qc);
}
/**
* pacpi_port_start - port setup
* @ap: ATA port being set up
*
* Use the port_start hook to maintain private control structures
*/
static int pacpi_port_start(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pata_acpi *acpi;
if (ACPI_HANDLE(&ap->tdev) == NULL)
return -ENODEV;
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
if (ap->private_data == NULL)
return -ENOMEM;
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
return ata_bmdma_port_start(ap);
}
static struct scsi_host_template pacpi_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 11:22:49 +08:00
static struct ata_port_operations pacpi_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_issue = pacpi_qc_issue,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 11:22:49 +08:00
.cable_detect = pacpi_cable_detect,
.mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
.set_dmamode = pacpi_set_dmamode,
.prereset = pacpi_pre_reset,
.port_start = pacpi_port_start,
};
/**
* pacpi_init_one - Register ACPI ATA PCI device with kernel services
* @pdev: PCI device to register
* @ent: Entry in pacpi_pci_tbl matching with @pdev
*
* Called from kernel PCI layer.
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, or -ERRNO value.
*/
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
if (pdev->vendor == PCI_VENDOR_ID_ATI) {
int rc = pcim_enable_device(pdev);
if (rc < 0)
return rc;
pcim_pin_device(pdev);
}
return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
{ } /* terminate list */
};
static struct pci_driver pacpi_pci_driver = {
.name = DRV_NAME,
.id_table = pacpi_pci_tbl,
.probe = pacpi_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
module_pci_driver(pacpi_pci_driver);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
MODULE_VERSION(DRV_VERSION);