2005-04-17 06:20:36 +08:00
|
|
|
#ifndef _LINUX_CPUSET_H
|
|
|
|
|
#define _LINUX_CPUSET_H
|
|
|
|
|
/*
|
|
|
|
|
* cpuset interface
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2003 BULL SA
|
[PATCH] cpuset memory spread basic implementation
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).
The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.
All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.
There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures. They are called 'memory_spread_page' and 'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.
The implementation is simple. Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset. In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.
The cpuset_mem_spread_node() routine is also simple. It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.
This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit. Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.
A couple of Copyright year ranges are updated as well. And a couple of email
addresses that can be found in the MAINTAINERS file are removed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:16:03 +08:00
|
|
|
* Copyright (C) 2004-2006 Silicon Graphics, Inc.
|
2005-04-17 06:20:36 +08:00
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/sched.h>
|
|
|
|
|
#include <linux/cpumask.h>
|
|
|
|
|
#include <linux/nodemask.h>
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_CPUSETS
|
|
|
|
|
|
2006-01-08 17:01:57 +08:00
|
|
|
extern int number_of_cpusets; /* How many cpusets are defined in system? */
|
|
|
|
|
|
2006-01-08 17:02:01 +08:00
|
|
|
extern int cpuset_init_early(void);
|
2005-04-17 06:20:36 +08:00
|
|
|
extern int cpuset_init(void);
|
|
|
|
|
extern void cpuset_init_smp(void);
|
|
|
|
|
extern void cpuset_fork(struct task_struct *p);
|
|
|
|
|
extern void cpuset_exit(struct task_struct *p);
|
2006-01-08 17:01:55 +08:00
|
|
|
extern cpumask_t cpuset_cpus_allowed(struct task_struct *p);
|
|
|
|
|
extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
|
2005-04-17 06:20:36 +08:00
|
|
|
void cpuset_init_current_mems_allowed(void);
|
2006-01-08 17:01:54 +08:00
|
|
|
void cpuset_update_task_memory_state(void);
|
2006-01-08 17:01:47 +08:00
|
|
|
#define cpuset_nodes_subset_current_mems_allowed(nodes) \
|
|
|
|
|
nodes_subset((nodes), current->mems_allowed)
|
2005-04-17 06:20:36 +08:00
|
|
|
int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl);
|
2006-01-08 17:01:57 +08:00
|
|
|
|
|
|
|
|
extern int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask);
|
|
|
|
|
static int inline cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
|
|
|
|
|
{
|
|
|
|
|
return number_of_cpusets <= 1 || __cpuset_zone_allowed(z, gfp_mask);
|
|
|
|
|
}
|
|
|
|
|
|
2005-09-07 06:18:13 +08:00
|
|
|
extern int cpuset_excl_nodes_overlap(const struct task_struct *p);
|
[PATCH] cpuset: memory pressure meter
Provide a simple per-cpuset metric of memory pressure, tracking the -rate-
that the tasks in a cpuset call try_to_free_pages(), the synchronous
(direct) memory reclaim code.
This enables batch managers monitoring jobs running in dedicated cpusets to
efficiently detect what level of memory pressure that job is causing.
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or reprioritize jobs that are
trying to use more memory than allowed on the nodes assigned them, and with
tightly coupled, long running, massively parallel scientific computing jobs
that will dramatically fail to meet required performance goals if they
start to use more memory than allowed to them.
This patch just provides a very economical way for the batch manager to
monitor a cpuset for signs of memory pressure. It's up to the batch
manager or other user code to decide what to do about it and take action.
==> Unless this feature is enabled by writing "1" to the special file
/dev/cpuset/memory_pressure_enabled, the hook in the rebalance
code of __alloc_pages() for this metric reduces to simply noticing
that the cpuset_memory_pressure_enabled flag is zero. So only
systems that enable this feature will compute the metric.
Why a per-cpuset, running average:
Because this meter is per-cpuset, rather than per-task or mm, the
system load imposed by a batch scheduler monitoring this metric is
sharply reduced on large systems, because a scan of the tasklist can be
avoided on each set of queries.
Because this meter is a running average, instead of an accumulating
counter, a batch scheduler can detect memory pressure with a single
read, instead of having to read and accumulate results for a period of
time.
Because this meter is per-cpuset rather than per-task or mm, the
batch scheduler can obtain the key information, memory pressure in a
cpuset, with a single read, rather than having to query and accumulate
results over all the (dynamically changing) set of tasks in the cpuset.
A per-cpuset simple digital filter (requires a spinlock and 3 words of data
per-cpuset) is kept, and updated by any task attached to that cpuset, if it
enters the synchronous (direct) page reclaim code.
A per-cpuset file provides an integer number representing the recent
(half-life of 10 seconds) rate of direct page reclaims caused by the tasks
in the cpuset, in units of reclaims attempted per second, times 1000.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 17:01:49 +08:00
|
|
|
|
|
|
|
|
#define cpuset_memory_pressure_bump() \
|
|
|
|
|
do { \
|
|
|
|
|
if (cpuset_memory_pressure_enabled) \
|
|
|
|
|
__cpuset_memory_pressure_bump(); \
|
|
|
|
|
} while (0)
|
|
|
|
|
extern int cpuset_memory_pressure_enabled;
|
|
|
|
|
extern void __cpuset_memory_pressure_bump(void);
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
extern struct file_operations proc_cpuset_operations;
|
|
|
|
|
extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
|
|
|
|
|
|
2006-01-15 05:21:06 +08:00
|
|
|
extern void cpuset_lock(void);
|
|
|
|
|
extern void cpuset_unlock(void);
|
|
|
|
|
|
[PATCH] cpuset memory spread basic implementation
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).
The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.
All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.
There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures. They are called 'memory_spread_page' and 'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.
The implementation is simple. Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset. In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.
The cpuset_mem_spread_node() routine is also simple. It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.
This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit. Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.
A couple of Copyright year ranges are updated as well. And a couple of email
addresses that can be found in the MAINTAINERS file are removed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:16:03 +08:00
|
|
|
extern int cpuset_mem_spread_node(void);
|
|
|
|
|
|
|
|
|
|
static inline int cpuset_do_page_mem_spread(void)
|
|
|
|
|
{
|
|
|
|
|
return current->flags & PF_SPREAD_PAGE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int cpuset_do_slab_mem_spread(void)
|
|
|
|
|
{
|
|
|
|
|
return current->flags & PF_SPREAD_SLAB;
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#else /* !CONFIG_CPUSETS */
|
|
|
|
|
|
2006-01-08 17:02:01 +08:00
|
|
|
static inline int cpuset_init_early(void) { return 0; }
|
2005-04-17 06:20:36 +08:00
|
|
|
static inline int cpuset_init(void) { return 0; }
|
|
|
|
|
static inline void cpuset_init_smp(void) {}
|
|
|
|
|
static inline void cpuset_fork(struct task_struct *p) {}
|
|
|
|
|
static inline void cpuset_exit(struct task_struct *p) {}
|
|
|
|
|
|
|
|
|
|
static inline cpumask_t cpuset_cpus_allowed(struct task_struct *p)
|
|
|
|
|
{
|
|
|
|
|
return cpu_possible_map;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-08 17:01:55 +08:00
|
|
|
static inline nodemask_t cpuset_mems_allowed(struct task_struct *p)
|
|
|
|
|
{
|
|
|
|
|
return node_possible_map;
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static inline void cpuset_init_current_mems_allowed(void) {}
|
2006-01-08 17:01:54 +08:00
|
|
|
static inline void cpuset_update_task_memory_state(void) {}
|
2006-01-08 17:01:47 +08:00
|
|
|
#define cpuset_nodes_subset_current_mems_allowed(nodes) (1)
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
|
static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl)
|
|
|
|
|
{
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
2005-10-07 14:46:04 +08:00
|
|
|
static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
2005-09-07 06:18:13 +08:00
|
|
|
static inline int cpuset_excl_nodes_overlap(const struct task_struct *p)
|
|
|
|
|
{
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
[PATCH] cpuset: memory pressure meter
Provide a simple per-cpuset metric of memory pressure, tracking the -rate-
that the tasks in a cpuset call try_to_free_pages(), the synchronous
(direct) memory reclaim code.
This enables batch managers monitoring jobs running in dedicated cpusets to
efficiently detect what level of memory pressure that job is causing.
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or reprioritize jobs that are
trying to use more memory than allowed on the nodes assigned them, and with
tightly coupled, long running, massively parallel scientific computing jobs
that will dramatically fail to meet required performance goals if they
start to use more memory than allowed to them.
This patch just provides a very economical way for the batch manager to
monitor a cpuset for signs of memory pressure. It's up to the batch
manager or other user code to decide what to do about it and take action.
==> Unless this feature is enabled by writing "1" to the special file
/dev/cpuset/memory_pressure_enabled, the hook in the rebalance
code of __alloc_pages() for this metric reduces to simply noticing
that the cpuset_memory_pressure_enabled flag is zero. So only
systems that enable this feature will compute the metric.
Why a per-cpuset, running average:
Because this meter is per-cpuset, rather than per-task or mm, the
system load imposed by a batch scheduler monitoring this metric is
sharply reduced on large systems, because a scan of the tasklist can be
avoided on each set of queries.
Because this meter is a running average, instead of an accumulating
counter, a batch scheduler can detect memory pressure with a single
read, instead of having to read and accumulate results for a period of
time.
Because this meter is per-cpuset rather than per-task or mm, the
batch scheduler can obtain the key information, memory pressure in a
cpuset, with a single read, rather than having to query and accumulate
results over all the (dynamically changing) set of tasks in the cpuset.
A per-cpuset simple digital filter (requires a spinlock and 3 words of data
per-cpuset) is kept, and updated by any task attached to that cpuset, if it
enters the synchronous (direct) page reclaim code.
A per-cpuset file provides an integer number representing the recent
(half-life of 10 seconds) rate of direct page reclaims caused by the tasks
in the cpuset, in units of reclaims attempted per second, times 1000.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 17:01:49 +08:00
|
|
|
static inline void cpuset_memory_pressure_bump(void) {}
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static inline char *cpuset_task_status_allowed(struct task_struct *task,
|
|
|
|
|
char *buffer)
|
|
|
|
|
{
|
|
|
|
|
return buffer;
|
|
|
|
|
}
|
|
|
|
|
|
2006-01-15 05:21:06 +08:00
|
|
|
static inline void cpuset_lock(void) {}
|
|
|
|
|
static inline void cpuset_unlock(void) {}
|
|
|
|
|
|
[PATCH] cpuset memory spread basic implementation
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).
The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.
All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.
There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures. They are called 'memory_spread_page' and 'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.
The implementation is simple. Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset. In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.
The cpuset_mem_spread_node() routine is also simple. It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.
This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit. Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.
A couple of Copyright year ranges are updated as well. And a couple of email
addresses that can be found in the MAINTAINERS file are removed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:16:03 +08:00
|
|
|
static inline int cpuset_mem_spread_node(void)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int cpuset_do_page_mem_spread(void)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline int cpuset_do_slab_mem_spread(void)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif /* !CONFIG_CPUSETS */
|
|
|
|
|
|
|
|
|
|
#endif /* _LINUX_CPUSET_H */
|