hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/tile/kernel/head_32.S

184 lines
4.8 KiB
ArmAsm
Raw Normal View History

arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*
* TILE startup code.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/thread_info.h>
#include <asm/processor.h>
#include <asm/asm-offsets.h>
#include <hv/hypervisor.h>
#include <arch/chip.h>
arch/tile: parameterize system PLs to support KVM port While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 04:23:03 +08:00
#include <arch/spr_def.h>
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
/*
* This module contains the entry code for kernel images. It performs the
* minimal setup needed to call the generic C routines.
*/
__HEAD
ENTRY(_start)
/* Notify the hypervisor of what version of the API we want */
{
movei r1, TILE_CHIP
movei r2, TILE_CHIP_REV
}
{
tile: support new Tilera hypervisor The Tilera hypervisor shipped in releases up through MDE 4.1 launches the client operating system (i.e. Linux) at privilege level 1 (PL1). Starting with MDE 4.2, as part of the work to enable KVM, the Tilera hypervisor launches Linux at PL2 instead. This commit makes the KERNEL_PL option default to 2 for tilegx, while still saying at 1 for tilepro, which doesn't have an updated hypervisor. It also explains how and when you might want to choose another value. In addition, we change a small buglet in the on-chip Ethernet driver, where we were failing to use the KERNEL_PL constant in an API call. To make the transition cleaner, this change also provides the updated hv_init() API for the new hypervisor that supports announcing Linux's compiled-in PL, so the hypervisor can generate a suitable error in the case of a mismatched hypervisor and Linux binary. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable@vger.linux.org
2013-05-03 03:29:04 +08:00
moveli r0, _HV_VERSION_OLD_HV_INIT
tile: provide traceability for hypervisor calls This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that provides C code wrappers for the calls the kernel makes to the Tilera hypervisor. This allows standard kernel infrastructure like FTRACE to be able to instrument hypervisor calls. To allow direct calls to the true API, we export their names with a leading underscore as well. This is important for the few contexts where we need to make hypervisor calls without touching the stack. As part of this change, we also switch from creating the symbols with linker magic to creating them with assembler magic. This lets us provide a symbol type and generally make them appear more as symbols and less as just random values in the Elf namespace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-08 04:03:08 +08:00
jal _hv_init
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
}
/* Get a reasonable default ASID in r0 */
{
move r0, zero
tile: provide traceability for hypervisor calls This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that provides C code wrappers for the calls the kernel makes to the Tilera hypervisor. This allows standard kernel infrastructure like FTRACE to be able to instrument hypervisor calls. To allow direct calls to the true API, we export their names with a leading underscore as well. This is important for the few contexts where we need to make hypervisor calls without touching the stack. As part of this change, we also switch from creating the symbols with linker magic to creating them with assembler magic. This lets us provide a symbol type and generally make them appear more as symbols and less as just random values in the Elf namespace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-08 04:03:08 +08:00
jal _hv_inquire_asid
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
}
/* Install the default page table */
{
moveli r6, lo16(swapper_pgprot - PAGE_OFFSET)
move r4, r0 /* use starting ASID of range for this page table */
}
{
moveli r0, lo16(swapper_pg_dir - PAGE_OFFSET)
auli r6, r6, ha16(swapper_pgprot - PAGE_OFFSET)
}
{
lw r2, r6
addi r6, r6, 4
}
{
lw r3, r6
auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET)
}
{
tile: convert uses of "inv" to "finv" The "inv" (invalidate) instruction is generally less safe than "finv" (flush and invalidate), as it will drop dirty data from the cache. It turns out we have almost no need for "inv" (other than for the older 32-bit architecture in some limited cases), so convert to "finv" where possible and delete the extra "inv" infrastructure. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-24 05:32:04 +08:00
finv r6
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
move r1, zero /* high 32 bits of CPA is zero */
}
{
moveli lr, lo16(1f)
arch/tile: Allow tilegx to build with either 16K or 64K page size This change introduces new flags for the hv_install_context() API that passes a page table pointer to the hypervisor. Clients can explicitly request 4K, 16K, or 64K small pages when they install a new context. In practice, the page size is fixed at kernel compile time and the same size is always requested every time a new page table is installed. The <hv/hypervisor.h> header changes so that it provides more abstract macros for managing "page" things like PFNs and page tables. For example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old HV_PAGE_SIZE_SMALL. The various PFN routines have been eliminated and only PA- or PTFN-based ones remain (since PTFNs are always expressed in fixed 2KB "page" size). The page-table management macros are renamed with a leading underscore and take page-size arguments with the presumption that clients will use those macros in some single place to provide the "real" macros they will use themselves. I happened to notice the old hv_set_caching() API was totally broken (it assumed 4KB pages) so I changed it so it would nominally work correctly with other page sizes. Tag modules with the page size so you can't load a module built with a conflicting page size. (And add a test for SMP while we're at it.) Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 01:58:43 +08:00
moveli r5, CTX_PAGE_FLAG
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
}
{
auli lr, lr, ha16(1f)
tile: provide traceability for hypervisor calls This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that provides C code wrappers for the calls the kernel makes to the Tilera hypervisor. This allows standard kernel infrastructure like FTRACE to be able to instrument hypervisor calls. To allow direct calls to the true API, we export their names with a leading underscore as well. This is important for the few contexts where we need to make hypervisor calls without touching the stack. As part of this change, we also switch from creating the symbols with linker magic to creating them with assembler magic. This lets us provide a symbol type and generally make them appear more as symbols and less as just random values in the Elf namespace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-08 04:03:08 +08:00
j _hv_install_context
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
}
1:
arch/tile: parameterize system PLs to support KVM port While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 04:23:03 +08:00
/* Get our processor number and save it away in SAVE_K_0. */
tile: provide traceability for hypervisor calls This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that provides C code wrappers for the calls the kernel makes to the Tilera hypervisor. This allows standard kernel infrastructure like FTRACE to be able to instrument hypervisor calls. To allow direct calls to the true API, we export their names with a leading underscore as well. This is important for the few contexts where we need to make hypervisor calls without touching the stack. As part of this change, we also switch from creating the symbols with linker magic to creating them with assembler magic. This lets us provide a symbol type and generally make them appear more as symbols and less as just random values in the Elf namespace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-08 04:03:08 +08:00
jal _hv_inquire_topology
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
mulll_uu r4, r1, r2 /* r1 == y, r2 == width */
add r4, r4, r0 /* r0 == x, so r4 == cpu == y*width + x */
#ifdef CONFIG_SMP
/*
* Load up our per-cpu offset. When the first (master) tile
* boots, this value is still zero, so we will load boot_pc
tilegx: change how we find the kernel stack Previously, we used a special-purpose register (SPR_SYSTEM_SAVE_K_0) to hold the CPU number and the top of the current kernel stack by using the low bits to hold the CPU number, and using the high bits to hold the address of the page just above where we'd want the kernel stack to be. That way we could initialize a new SP when first entering the kernel by just masking the SPR value and subtracting a couple of words. However, it's actually more useful to be able to place an arbitrary kernel-top value in the SPR. This allows us to create a new stack context (e.g. for virtualization) with an arbitrary top-of-stack VA. To make this work, we now store the CPU number in the high bits, above the highest legal VA bit (42 bits in the current tilegx microarchitecture). The full 42 bits are thus available to store the top of stack value. Getting the current cpu (a relatively common operation) is still fast; it's now a shift rather than a mask. We make this change only for tilegx, since tilepro has too few SPR bits to do this, and we don't need this support on tilepro anyway. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-11 00:35:02 +08:00
* with start_kernel, and boot_sp at the top of init_stack.
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
* The master tile initializes the per-cpu offset array, so that
* when subsequent (secondary) tiles boot, they will instead load
* from their per-cpu versions of boot_sp and boot_pc.
*/
moveli r5, lo16(__per_cpu_offset)
auli r5, r5, ha16(__per_cpu_offset)
s2a r5, r4, r5
lw r5, r5
bnz r5, 1f
/*
* Save the width and height to the smp_topology variable
* for later use.
*/
moveli r0, lo16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
auli r0, r0, ha16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
{
sw r0, r2
addi r0, r0, (HV_TOPOLOGY_HEIGHT_OFFSET - HV_TOPOLOGY_WIDTH_OFFSET)
}
sw r0, r3
1:
#else
move r5, zero
#endif
/* Load and go with the correct pc and sp. */
{
addli r1, r5, lo16(boot_sp)
addli r0, r5, lo16(boot_pc)
}
{
auli r1, r1, ha16(boot_sp)
auli r0, r0, ha16(boot_pc)
}
lw r0, r0
lw sp, r1
or r4, sp, r4
arch/tile: parameterize system PLs to support KVM port While not a port to KVM (yet), this change modifies the kernel to be able to build either at PL1 or at PL2 with a suitable config switch. Pushing up this change avoids handling branch merge issues going forward with the KVM work. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-10-15 04:23:03 +08:00
mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
{
move lr, zero /* stop backtraces in the called function */
jr r0
}
ENDPROC(_start)
arch/tile: catch up with section naming convention in 2.6.35 The convention changed to, e.g., ".data..page_aligned". This commit fixes the places in the tile architecture that were still using the old convention. One tile-specific section (.init.page) was dropped in favor of just using an "aligned" attribute. Sam Ravnborg <sam@ravnborg.org> pointed out __PAGE_ALIGNED_BSS, etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-02-28 07:52:24 +08:00
__PAGE_ALIGNED_BSS
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.align PAGE_SIZE
ENTRY(empty_zero_page)
.fill PAGE_SIZE,1,0
END(empty_zero_page)
.macro PTE va, cpa, bits1, no_org=0
.ifeq \no_org
arch/tile: Allow tilegx to build with either 16K or 64K page size This change introduces new flags for the hv_install_context() API that passes a page table pointer to the hypervisor. Clients can explicitly request 4K, 16K, or 64K small pages when they install a new context. In practice, the page size is fixed at kernel compile time and the same size is always requested every time a new page table is installed. The <hv/hypervisor.h> header changes so that it provides more abstract macros for managing "page" things like PFNs and page tables. For example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old HV_PAGE_SIZE_SMALL. The various PFN routines have been eliminated and only PA- or PTFN-based ones remain (since PTFNs are always expressed in fixed 2KB "page" size). The page-table management macros are renamed with a leading underscore and take page-size arguments with the presumption that clients will use those macros in some single place to provide the "real" macros they will use themselves. I happened to notice the old hv_set_caching() API was totally broken (it assumed 4KB pages) so I changed it so it would nominally work correctly with other page sizes. Tag modules with the page size so you can't load a module built with a conflicting page size. (And add a test for SMP while we're at it.) Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 01:58:43 +08:00
.org swapper_pg_dir + PGD_INDEX(\va) * HV_PTE_SIZE
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.endif
.word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
(HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
arch/tile: Allow tilegx to build with either 16K or 64K page size This change introduces new flags for the hv_install_context() API that passes a page table pointer to the hypervisor. Clients can explicitly request 4K, 16K, or 64K small pages when they install a new context. In practice, the page size is fixed at kernel compile time and the same size is always requested every time a new page table is installed. The <hv/hypervisor.h> header changes so that it provides more abstract macros for managing "page" things like PFNs and page tables. For example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old HV_PAGE_SIZE_SMALL. The various PFN routines have been eliminated and only PA- or PTFN-based ones remain (since PTFNs are always expressed in fixed 2KB "page" size). The page-table management macros are renamed with a leading underscore and take page-size arguments with the presumption that clients will use those macros in some single place to provide the "real" macros they will use themselves. I happened to notice the old hv_set_caching() API was totally broken (it assumed 4KB pages) so I changed it so it would nominally work correctly with other page sizes. Tag modules with the page size so you can't load a module built with a conflicting page size. (And add a test for SMP while we're at it.) Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 01:58:43 +08:00
.word (\bits1) | (HV_CPA_TO_PTFN(\cpa) << (HV_PTE_INDEX_PTFN - 32))
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.endm
arch/tile: catch up with section naming convention in 2.6.35 The convention changed to, e.g., ".data..page_aligned". This commit fixes the places in the tile architecture that were still using the old convention. One tile-specific section (.init.page) was dropped in favor of just using an "aligned" attribute. Sam Ravnborg <sam@ravnborg.org> pointed out __PAGE_ALIGNED_BSS, etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-02-28 07:52:24 +08:00
__PAGE_ALIGNED_DATA
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.align PAGE_SIZE
ENTRY(swapper_pg_dir)
/*
* All data pages from PAGE_OFFSET to MEM_USER_INTRPT are mapped as
* VA = PA + PAGE_OFFSET. We remap things with more precise access
* permissions and more respect for size of RAM later.
*/
.set addr, 0
.rept (MEM_USER_INTRPT - PAGE_OFFSET) >> PGDIR_SHIFT
arch/tile: support newer binutils assembler shift semantics This change supports building the kernel with newer binutils where a shift of greater than the word size is no longer interpreted silently as modulo the word size, but instead generates a warning. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-18 02:32:06 +08:00
PTE addr + PAGE_OFFSET, addr, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
(1 << (HV_PTE_INDEX_WRITABLE - 32))
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.set addr, addr + PGDIR_SIZE
.endr
tile: parameterize VA and PA space more cleanly The existing code relied on the hardware definition (<arch/chip.h>) to specify how much VA and PA space was available. It's convenient to allow customizing this for some configurations, so provide symbols MAX_PA_WIDTH and MAX_VA_WIDTH in <asm/page.h> that can be modified if desired. Additionally, move away from the MEM_XX_INTRPT nomenclature to define the start of various regions within the VA space. In fact the cleaner symbol is, for example, MEM_SV_START, to indicate the start of the area used for supervisor code; the actual address of the interrupt vectors is not as important, and can be changed if desired. As part of this change, convert from "intrpt1" nomenclature (which built in the old privilege-level 1 model) to a simple "intrpt". Also strip out some tilepro-specific code supporting modifying the PL the kernel could run at, since we don't actually support using different PLs in tilepro, only tilegx. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-04 02:41:36 +08:00
/* The true text VAs are mapped as VA = PA + MEM_SV_START */
PTE MEM_SV_START, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
arch/tile: support newer binutils assembler shift semantics This change supports building the kernel with newer binutils where a shift of greater than the word size is no longer interpreted silently as modulo the word size, but instead generates a warning. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-18 02:32:06 +08:00
(1 << (HV_PTE_INDEX_EXECUTABLE - 32))
arch/tile: Allow tilegx to build with either 16K or 64K page size This change introduces new flags for the hv_install_context() API that passes a page table pointer to the hypervisor. Clients can explicitly request 4K, 16K, or 64K small pages when they install a new context. In practice, the page size is fixed at kernel compile time and the same size is always requested every time a new page table is installed. The <hv/hypervisor.h> header changes so that it provides more abstract macros for managing "page" things like PFNs and page tables. For example there is now a HV_DEFAULT_PAGE_SIZE_SMALL instead of the old HV_PAGE_SIZE_SMALL. The various PFN routines have been eliminated and only PA- or PTFN-based ones remain (since PTFNs are always expressed in fixed 2KB "page" size). The page-table management macros are renamed with a leading underscore and take page-size arguments with the presumption that clients will use those macros in some single place to provide the "real" macros they will use themselves. I happened to notice the old hv_set_caching() API was totally broken (it assumed 4KB pages) so I changed it so it would nominally work correctly with other page sizes. Tag modules with the page size so you can't load a module built with a conflicting page size. (And add a test for SMP while we're at it.) Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-30 01:58:43 +08:00
.org swapper_pg_dir + PGDIR_SIZE
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
END(swapper_pg_dir)
/*
* Isolate swapper_pgprot to its own cache line, since each cpu
* starting up will read it using VA-is-PA and local homing.
* This would otherwise likely conflict with other data on the cache
* line, once we have set its permanent home in the page tables.
*/
__INITDATA
.align CHIP_L2_LINE_SIZE()
ENTRY(swapper_pgprot)
arch/tile: support newer binutils assembler shift semantics This change supports building the kernel with newer binutils where a shift of greater than the word size is no longer interpreted silently as modulo the word size, but instead generates a warning. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-03-18 02:32:06 +08:00
PTE 0, 0, (1 << (HV_PTE_INDEX_READABLE - 32)) | \
(1 << (HV_PTE_INDEX_WRITABLE - 32)), 1
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
.align CHIP_L2_LINE_SIZE()
END(swapper_pgprot)