hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/mach-kirkwood/Kconfig

150 lines
3.9 KiB
Plaintext
Raw Normal View History

[ARM] add Marvell Kirkwood (88F6000) SoC support The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-23 04:45:06 +08:00
if ARCH_KIRKWOOD
menu "Marvell Kirkwood Implementations"
config MACH_DB88F6281_BP
bool "Marvell DB-88F6281-BP Development Board"
help
Say 'Y' here if you want your kernel to support the
Marvell DB-88F6281-BP Development Board.
config MACH_RD88F6192_NAS
bool "Marvell RD-88F6192-NAS Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6192-NAS Reference Board.
config MACH_RD88F6281
bool "Marvell RD-88F6281 Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
[ARM] Kirkwood: add Marvell 88F6281 GTW GE board support Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-10-19 08:38:25 +08:00
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
[ARM] Kirkwood: Marvell SheevaPlug support Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-02-25 04:26:23 +08:00
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
[ARM] eSATA SheevaPlug basic board support Allow basic eSATA SheevaPlug board configuration and build. Signed-off-by: John Holland <john.holland@cellent-fs.de> Signed-off-by: Nicolas Pitre <nico@marvell.com> --
2010-02-20 06:10:58 +08:00
config MACH_ESATA_SHEEVAPLUG
bool "Marvell eSATA SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell eSATA SheevaPlug Reference Board.
[ARM] Kirkwood: Marvell GuruPlug support GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-22 17:28:20 +08:00
config MACH_GURUPLUG
bool "Marvell GuruPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell GuruPlug Reference Board.
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
select USE_OF
help
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
config MACH_DREAMPLUG_DT
bool "Marvell DreamPlug (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell DreamPlug (Flattened Device Tree).
[ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS Add support for the QNAP TS-119 and TS-219 Turbo NAS devices. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-22 22:22:11 +08:00
config MACH_TS219
Kirkwood: Add support for 6282 based QNAP devices Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-07 05:53:16 +08:00
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
[ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS Add support for the QNAP TS-119 and TS-219 Turbo NAS devices. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-22 22:22:11 +08:00
help
Say 'Y' here if you want your kernel to support the
Kirkwood: Add support for 6282 based QNAP devices Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-07 05:53:16 +08:00
QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
TS-219P+ Turbo NAS devices.
[ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS Add support for the QNAP TS-119 and TS-219 Turbo NAS devices. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-22 22:22:11 +08:00
[ARM] Kirkwood: Add support for QNAP TS-41x Turbo NAS Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-06 01:45:32 +08:00
config MACH_TS41X
Kirkwood: Add support for 6282 based QNAP devices Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-07 05:53:16 +08:00
bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
[ARM] Kirkwood: Add support for QNAP TS-41x Turbo NAS Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-06 01:45:32 +08:00
help
Say 'Y' here if you want your kernel to support the
Kirkwood: Add support for 6282 based QNAP devices Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-12-07 05:53:16 +08:00
QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
NAS devices.
[ARM] Kirkwood: Add support for QNAP TS-41x Turbo NAS Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-06 01:45:32 +08:00
[ARM] Kirkwood: support for Seagate DockStar This patch adds support for the Seagate FreeAgent DockStar, a Marvell SheevaPlug variant. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-15 22:49:41 +08:00
config MACH_DOCKSTAR
bool "Seagate FreeAgent DockStar"
help
Say 'Y' here if you want your kernel to support the
Seagate FreeAgent DockStar.
[ARM] kirkwood: combine support for openrd base/client support Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-01-19 07:38:19 +08:00
config MACH_OPENRD
bool
[ARM] Kirkwood: Marvell OpenRD-Base board support reference: http://open-rd.org http://code.google.com/p/openrd This patch is tested for: 1. Boot from DRAM/NAND flash 2. NAND read/write/erase 3. GbE0 4. USB read/write FIXME: 1. SD/UART1 selection 2. MPP configuration (currently, default) 3. PEX Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10 20:07:34 +08:00
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
[ARM] kirkwood: combine support for openrd base/client support Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-01-19 07:38:19 +08:00
select MACH_OPENRD
[ARM] Kirkwood: Marvell OpenRD-Base board support reference: http://open-rd.org http://code.google.com/p/openrd This patch is tested for: 1. Boot from DRAM/NAND flash 2. NAND read/write/erase 3. GbE0 4. USB read/write FIXME: 1. SD/UART1 selection 2. MPP configuration (currently, default) 3. PEX Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-10 20:07:34 +08:00
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Base Board.
[ARM] kirkwood: combine support for openrd base/client support Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-01-19 07:38:19 +08:00
config MACH_OPENRD_CLIENT
bool "Marvell OpenRD Client Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Client Board.
[ARM] Marvell OpenRD-Ultimate machine support This patch adds support for the OpenRD Ultimate machine (could be found at http://www.arm.linux.org.uk/developer/machines/list.php?id=2884) Signed-off-by: Dmytro Milinevskyy <milinevskyy@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-06-11 03:12:55 +08:00
config MACH_OPENRD_ULTIMATE
bool "Marvell OpenRD Ultimate Board"
select MACH_OPENRD
help
Say 'Y' here if you want your kernel to support the
Marvell OpenRD Ultimate Board.
[ARM] Kirkwood: Add LaCie Network Space v2 support Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-12-09 08:43:49 +08:00
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
[ARM] Kirkwood: add LaCie Internet Space v2 support The Internet and Network Space v2 boards are very close. The only difference is that there is no USB type B plug wired on the Internet Space v2. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-02-10 04:20:55 +08:00
config MACH_INETSPACE_V2
bool "LaCie Internet Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Internet Space v2 NAS.
[ARM] Kirkwood: add LaCie Network Space Max v2 support Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-05 18:31:04 +08:00
config MACH_NETSPACE_MAX_V2
bool "LaCie Network Space Max v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space Max v2 NAS.
[ARM] Kirkwood: add LaCie d2 Network v2 support Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 21:33:58 +08:00
config MACH_D2NET_V2
bool "LaCie d2 Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
[ARM] Kirkwood: add LaCie 2Big Network v2 support Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-02-03 08:41:09 +08:00
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network v2 NAS.
[ARM] Kirkwood: add LaCie 5Big Network v2 support Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-01-05 03:20:07 +08:00
config MACH_NET5BIG_V2
bool "LaCie 5Big Network v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie 5Big Network v2 NAS.
[ARM] Kirkwood: Add support for HP t5325 Thin Client Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-06-14 03:00:16 +08:00
config MACH_T5325
bool "HP t5325 Thin Client"
help
Say 'Y' here if you want your kernel to support the
HP t5325 Thin Client.
[ARM] add Marvell Kirkwood (88F6000) SoC support The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-23 04:45:06 +08:00
endmenu
endif