linux-sg2042/drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h

639 lines
12 KiB
C
Raw Normal View History

[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
/*****************************************************************************
* *
* File: cpl5_cmd.h *
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
* $Revision: 1.6 $ *
* $Date: 2005/06/21 18:29:47 $ *
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
* Description: *
* part of the Chelsio 10Gb Ethernet Driver. *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License, version 2, as *
* published by the Free Software Foundation. *
* *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, see <http://www.gnu.org/licenses/>. *
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
* *
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
* *
* http://www.chelsio.com *
* *
* Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
* All rights reserved. *
* *
* Maintainers: maintainers@chelsio.com *
* *
* Authors: Dimitrios Michailidis <dm@chelsio.com> *
* Tina Yang <tainay@chelsio.com> *
* Felix Marti <felix@chelsio.com> *
* Scott Bardone <sbardone@chelsio.com> *
* Kurt Ottaway <kottaway@chelsio.com> *
* Frank DiMambro <frank@chelsio.com> *
* *
* History: *
* *
****************************************************************************/
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
#ifndef _CXGB_CPL5_CMD_H_
#define _CXGB_CPL5_CMD_H_
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#include <asm/byteorder.h>
#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD)
#error "Adjust your <asm/byteorder.h> defines"
#endif
enum CPL_opcode {
CPL_PASS_OPEN_REQ = 0x1,
CPL_PASS_OPEN_RPL = 0x2,
CPL_PASS_ESTABLISH = 0x3,
CPL_PASS_ACCEPT_REQ = 0xE,
CPL_PASS_ACCEPT_RPL = 0x4,
CPL_ACT_OPEN_REQ = 0x5,
CPL_ACT_OPEN_RPL = 0x6,
CPL_CLOSE_CON_REQ = 0x7,
CPL_CLOSE_CON_RPL = 0x8,
CPL_CLOSE_LISTSRV_REQ = 0x9,
CPL_CLOSE_LISTSRV_RPL = 0xA,
CPL_ABORT_REQ = 0xB,
CPL_ABORT_RPL = 0xC,
CPL_PEER_CLOSE = 0xD,
CPL_ACT_ESTABLISH = 0x17,
CPL_GET_TCB = 0x24,
CPL_GET_TCB_RPL = 0x25,
CPL_SET_TCB = 0x26,
CPL_SET_TCB_FIELD = 0x27,
CPL_SET_TCB_RPL = 0x28,
CPL_PCMD = 0x29,
CPL_PCMD_READ = 0x31,
CPL_PCMD_READ_RPL = 0x32,
CPL_RX_DATA = 0xA0,
CPL_RX_DATA_DDP = 0xA1,
CPL_RX_DATA_ACK = 0xA3,
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
CPL_RX_PKT = 0xAD,
CPL_RX_ISCSI_HDR = 0xAF,
CPL_TX_DATA_ACK = 0xB0,
CPL_TX_DATA = 0xB1,
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
CPL_TX_PKT = 0xB2,
CPL_TX_PKT_LSO = 0xB6,
CPL_RTE_DELETE_REQ = 0xC0,
CPL_RTE_DELETE_RPL = 0xC1,
CPL_RTE_WRITE_REQ = 0xC2,
CPL_RTE_WRITE_RPL = 0xD3,
CPL_RTE_READ_REQ = 0xC3,
CPL_RTE_READ_RPL = 0xC4,
CPL_L2T_WRITE_REQ = 0xC5,
CPL_L2T_WRITE_RPL = 0xD4,
CPL_L2T_READ_REQ = 0xC6,
CPL_L2T_READ_RPL = 0xC7,
CPL_SMT_WRITE_REQ = 0xC8,
CPL_SMT_WRITE_RPL = 0xD5,
CPL_SMT_READ_REQ = 0xC9,
CPL_SMT_READ_RPL = 0xCA,
CPL_ARP_MISS_REQ = 0xCD,
CPL_ARP_MISS_RPL = 0xCE,
CPL_MIGRATE_C2T_REQ = 0xDC,
CPL_MIGRATE_C2T_RPL = 0xDD,
CPL_ERROR = 0xD7,
/* internal: driver -> TOM */
CPL_MSS_CHANGE = 0xE1
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
};
#define NUM_CPL_CMDS 256
enum CPL_error {
CPL_ERR_NONE = 0,
CPL_ERR_TCAM_PARITY = 1,
CPL_ERR_TCAM_FULL = 3,
CPL_ERR_CONN_RESET = 20,
CPL_ERR_CONN_EXIST = 22,
CPL_ERR_ARP_MISS = 23,
CPL_ERR_BAD_SYN = 24,
CPL_ERR_CONN_TIMEDOUT = 30,
CPL_ERR_XMIT_TIMEDOUT = 31,
CPL_ERR_PERSIST_TIMEDOUT = 32,
CPL_ERR_FINWAIT2_TIMEDOUT = 33,
CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
CPL_ERR_ABORT_FAILED = 42,
CPL_ERR_GENERAL = 99
};
enum {
CPL_CONN_POLICY_AUTO = 0,
CPL_CONN_POLICY_ASK = 1,
CPL_CONN_POLICY_DENY = 3
};
enum {
ULP_MODE_NONE = 0,
ULP_MODE_TCPDDP = 1,
ULP_MODE_ISCSI = 2,
ULP_MODE_IWARP = 3,
ULP_MODE_SSL = 4
};
enum {
CPL_PASS_OPEN_ACCEPT,
CPL_PASS_OPEN_REJECT
};
enum {
CPL_ABORT_SEND_RST = 0,
CPL_ABORT_NO_RST,
CPL_ABORT_POST_CLOSE_REQ = 2
};
enum { // TX_PKT_LSO ethernet types
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
CPL_ETH_II,
CPL_ETH_II_VLAN,
CPL_ETH_802_3,
CPL_ETH_802_3_VLAN
};
union opcode_tid {
u32 opcode_tid;
u8 opcode;
};
#define S_OPCODE 24
#define V_OPCODE(x) ((x) << S_OPCODE)
#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF)
#define G_TID(x) ((x) & 0xFFFFFF)
/* tid is assumed to be 24-bits */
#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid))
#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid)
/* extract the TID from a CPL command */
#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd))))
struct tcp_options {
u16 mss;
u8 wsf;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 rsvd:4;
u8 ecn:1;
u8 sack:1;
u8 tstamp:1;
#else
u8 tstamp:1;
u8 sack:1;
u8 ecn:1;
u8 rsvd:4;
#endif
};
struct cpl_pass_open_req {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 opt0h;
u32 opt0l;
u32 peer_netmask;
u32 opt1;
};
struct cpl_pass_open_rpl {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u8 resvd[7];
u8 status;
};
struct cpl_pass_establish {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 tos_tid;
u8 l2t_idx;
u8 rsvd[3];
u32 snd_isn;
u32 rcv_isn;
};
struct cpl_pass_accept_req {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 tos_tid;
struct tcp_options tcp_options;
u8 dst_mac[6];
u16 vlan_tag;
u8 src_mac[6];
u8 rsvd[2];
u32 rcv_isn;
u32 unknown_tcp_options;
};
struct cpl_pass_accept_rpl {
union opcode_tid ot;
u32 rsvd0;
u32 rsvd1;
u32 peer_ip;
u32 opt0h;
union {
u32 opt0l;
struct {
u8 rsvd[3];
u8 status;
};
};
};
struct cpl_act_open_req {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 opt0h;
u32 opt0l;
u32 iff_vlantag;
u32 rsvd;
};
struct cpl_act_open_rpl {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 new_tid;
u8 rsvd[3];
u8 status;
};
struct cpl_act_establish {
union opcode_tid ot;
u16 local_port;
u16 peer_port;
u32 local_ip;
u32 peer_ip;
u32 tos_tid;
u32 rsvd;
u32 snd_isn;
u32 rcv_isn;
};
struct cpl_get_tcb {
union opcode_tid ot;
u32 rsvd;
};
struct cpl_get_tcb_rpl {
union opcode_tid ot;
u16 len;
u8 rsvd;
u8 status;
};
struct cpl_set_tcb {
union opcode_tid ot;
u16 len;
u16 rsvd;
};
struct cpl_set_tcb_field {
union opcode_tid ot;
u8 rsvd[3];
u8 offset;
u32 mask;
u32 val;
};
struct cpl_set_tcb_rpl {
union opcode_tid ot;
u8 rsvd[3];
u8 status;
};
struct cpl_pcmd {
union opcode_tid ot;
u16 dlen_in;
u16 dlen_out;
u32 pcmd_parm[2];
};
struct cpl_pcmd_read {
union opcode_tid ot;
u32 rsvd1;
u16 rsvd2;
u32 addr;
u16 len;
};
struct cpl_pcmd_read_rpl {
union opcode_tid ot;
u16 len;
};
struct cpl_close_con_req {
union opcode_tid ot;
u32 rsvd;
};
struct cpl_close_con_rpl {
union opcode_tid ot;
u8 rsvd[3];
u8 status;
u32 snd_nxt;
u32 rcv_nxt;
};
struct cpl_close_listserv_req {
union opcode_tid ot;
u32 rsvd;
};
struct cpl_close_listserv_rpl {
union opcode_tid ot;
u8 rsvd[3];
u8 status;
};
struct cpl_abort_req {
union opcode_tid ot;
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u32 rsvd0;
u8 rsvd1;
u8 cmd;
u8 rsvd2[6];
};
struct cpl_abort_rpl {
union opcode_tid ot;
u32 rsvd0;
u8 rsvd1;
u8 status;
u8 rsvd2[6];
};
struct cpl_peer_close {
union opcode_tid ot;
u32 rsvd;
};
struct cpl_tx_data {
union opcode_tid ot;
u32 len;
u32 rsvd0;
u16 urg;
u16 flags;
};
struct cpl_tx_data_ack {
union opcode_tid ot;
u32 ack_seq;
};
struct cpl_rx_data {
union opcode_tid ot;
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u32 len;
u32 seq;
u16 urg;
u8 rsvd;
u8 status;
};
struct cpl_rx_data_ack {
union opcode_tid ot;
u32 credit;
};
struct cpl_rx_data_ddp {
union opcode_tid ot;
u32 len;
u32 seq;
u32 nxt_seq;
u32 ulp_crc;
u16 ddp_status;
u8 rsvd;
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 status;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
};
/*
* We want this header's alignment to be no more stringent than 2-byte aligned.
* All fields are u8 or u16 except for the length. However that field is not
* used so we break it into 2 16-bit parts to easily meet our alignment needs.
*/
struct cpl_tx_pkt {
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 opcode;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#if defined(__LITTLE_ENDIAN_BITFIELD)
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 iff:4;
u8 ip_csum_dis:1;
u8 l4_csum_dis:1;
u8 vlan_valid:1;
u8 rsvd:1;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#else
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 rsvd:1;
u8 vlan_valid:1;
u8 l4_csum_dis:1;
u8 ip_csum_dis:1;
u8 iff:4;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#endif
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u16 vlan;
u16 len_hi;
u16 len_lo;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
};
struct cpl_tx_pkt_lso {
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 opcode;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#if defined(__LITTLE_ENDIAN_BITFIELD)
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 iff:4;
u8 ip_csum_dis:1;
u8 l4_csum_dis:1;
u8 vlan_valid:1;
u8 :1;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#else
u8 :1;
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 vlan_valid:1;
u8 l4_csum_dis:1;
u8 ip_csum_dis:1;
u8 iff:4;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#endif
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u16 vlan;
__be32 len;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
u8 rsvd[5];
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#if defined(__LITTLE_ENDIAN_BITFIELD)
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 tcp_hdr_words:4;
u8 ip_hdr_words:4;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#else
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 ip_hdr_words:4;
u8 tcp_hdr_words:4;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#endif
__be16 eth_type_mss;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
};
struct cpl_rx_pkt {
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 opcode;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#if defined(__LITTLE_ENDIAN_BITFIELD)
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 iff:4;
u8 csum_valid:1;
u8 bad_pkt:1;
u8 vlan_valid:1;
u8 rsvd:1;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#else
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u8 rsvd:1;
u8 vlan_valid:1;
u8 bad_pkt:1;
u8 csum_valid:1;
u8 iff:4;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
#endif
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u16 csum;
u16 vlan;
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
u16 len;
[PATCH] A new 10GB Ethernet Driver by Chelsio Communications A Linux driver for the Chelsio 10Gb Ethernet Network Controller by Chelsio (http://www.chelsio.com). This driver supports the Chelsio N210 NIC and is backward compatible with the Chelsio N110 model 10Gb NICs. It supports AMD64, EM64T and x86 systems. Signed-off-by: Tina Yang <tinay@chelsio.com> Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Adrian said: - my3126.c is unused (because t1_my3126_ops isn't used anywhere) - what are the EXTRA_CFLAGS in drivers/net/chelsio/Makefile for? - $(cxgb-y) in drivers/net/chelsio/Makefile seems to be unneeded - completely unused global functions: - espi.c: t1_espi_get_intr_counts - sge.c: t1_sge_get_intr_counts - the following functions can be made static: - sge.c: t1_espi_workaround - sge.c: t1_sge_tx - subr.c: __t1_tpi_read - subr.c: __t1_tpi_write - subr.c: t1_wait_op_done shemminger said: The performance recommendations in cxgb.txt are common to all fast devices, and should be in one file rather than just for this device. I would rather see ip-sysctl.txt updated or a new file on tuning recommendations started. Some of them have consequences that aren't documented well. For example, turning off TCP timestamps risks data corruption from sequence wrap. A new driver shouldn't need so may #ifdef's unless you want to putit on older vendor versions of 2.4 Some accessor and wrapper functions like: t1_pci_read_config_4 adapter_name t1_malloc are just annoying noise. Why have useless dead code like: /* Interrupt handler */ +static int pm3393_interrupt_handler(struct cmac *cmac) +{ + u32 master_intr_status; +/* + 1. Read master interrupt register. + 2. Read BLOCK's interrupt status registers. + 3. Handle BLOCK interrupts. +*/ Jeff said: step 1: kill all the OS wrappers. And do you really need hooks for multiple MACs, when only one MAC is really supported? Typically these hooks are at a higher level anyway -- struct net_device. From: Christoph Lameter <christoph@lameter Driver modified as suggested by Pekka Enberg, Stephen Hemminger and Andrian Bunk. Reduces the size of the driver to ~260k. - clean up tabs - removed my3126.c - removed 85% of suni1x10gexp_regs.h - removed 80% of regs.h - removed various calls, renamed variables/functions. - removed system specific and other wrappers (usleep, msleep) - removed dead code - dropped redundant casts in osdep.h - dropped redundant check of kfree - dropped weird code (MODVERSIONS stuff) - reduced number of #ifdefs - use kcalloc now instead of kmalloc - Add information about known issues with the driver - Add information about authors Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN /dev/null Documentation/networking/cxgb.txt
2005-03-31 05:34:31 +08:00
};
struct cpl_l2t_write_req {
union opcode_tid ot;
u32 params;
u8 rsvd1[2];
u8 dst_mac[6];
};
struct cpl_l2t_write_rpl {
union opcode_tid ot;
u8 status;
u8 rsvd[3];
};
struct cpl_l2t_read_req {
union opcode_tid ot;
u8 rsvd[3];
u8 l2t_idx;
};
struct cpl_l2t_read_rpl {
union opcode_tid ot;
u32 params;
u8 rsvd1[2];
u8 dst_mac[6];
};
struct cpl_smt_write_req {
union opcode_tid ot;
u8 rsvd0;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 rsvd1:1;
u8 mtu_idx:3;
u8 iff:4;
#else
u8 iff:4;
u8 mtu_idx:3;
u8 rsvd1:1;
#endif
u16 rsvd2;
u16 rsvd3;
u8 src_mac1[6];
u16 rsvd4;
u8 src_mac0[6];
};
struct cpl_smt_write_rpl {
union opcode_tid ot;
u8 status;
u8 rsvd[3];
};
struct cpl_smt_read_req {
union opcode_tid ot;
u8 rsvd0;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 rsvd1:4;
u8 iff:4;
#else
u8 iff:4;
u8 rsvd1:4;
#endif
u16 rsvd2;
};
struct cpl_smt_read_rpl {
union opcode_tid ot;
u8 status;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 rsvd1:1;
u8 mtu_idx:3;
u8 rsvd0:4;
#else
u8 rsvd0:4;
u8 mtu_idx:3;
u8 rsvd1:1;
#endif
u16 rsvd2;
u16 rsvd3;
u8 src_mac1[6];
u16 rsvd4;
u8 src_mac0[6];
};
struct cpl_rte_delete_req {
union opcode_tid ot;
u32 params;
};
struct cpl_rte_delete_rpl {
union opcode_tid ot;
u8 status;
u8 rsvd[3];
};
struct cpl_rte_write_req {
union opcode_tid ot;
u32 params;
u32 netmask;
u32 faddr;
};
struct cpl_rte_write_rpl {
union opcode_tid ot;
u8 status;
u8 rsvd[3];
};
struct cpl_rte_read_req {
union opcode_tid ot;
u32 params;
};
struct cpl_rte_read_rpl {
union opcode_tid ot;
u8 status;
u8 rsvd0[2];
u8 l2t_idx;
#if defined(__LITTLE_ENDIAN_BITFIELD)
u8 rsvd1:7;
u8 select:1;
#else
u8 select:1;
u8 rsvd1:7;
#endif
u8 rsvd2[3];
u32 addr;
};
struct cpl_mss_change {
union opcode_tid ot;
u32 mss;
};
Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code.
2005-06-23 13:40:19 +08:00
#endif /* _CXGB_CPL5_CMD_H_ */