linux-sg2042/net/core/ethtool.c

1687 lines
40 KiB
C
Raw Normal View History

/*
* net/core/ethtool.c - Ethtool ioctl handler
* Copyright (c) 2003 Matthew Wilcox <matthew@wil.cx>
*
* This file is where we call all the ethtool_ops commands to get
* the information ethtool needs.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/net_tstamp.h>
#include <linux/phy.h>
ethtool: Add direct access to ops->get_sset_count On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 16:21:53 +08:00
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
/*
* Some useful ethtool_ops methods that're device independent.
* If we find that all drivers want to do the same thing here,
* we can turn these into dev_() function calls.
*/
u32 ethtool_op_get_link(struct net_device *dev)
{
return netif_carrier_ok(dev) ? 1 : 0;
}
EXPORT_SYMBOL(ethtool_op_get_link);
int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info)
{
info->so_timestamping =
SOF_TIMESTAMPING_TX_SOFTWARE |
SOF_TIMESTAMPING_RX_SOFTWARE |
SOF_TIMESTAMPING_SOFTWARE;
info->phc_index = -1;
return 0;
}
EXPORT_SYMBOL(ethtool_op_get_ts_info);
/* Handlers for each ethtool command */
#define ETHTOOL_DEV_FEATURE_WORDS ((NETDEV_FEATURE_COUNT + 31) / 32)
static const char netdev_features_strings[NETDEV_FEATURE_COUNT][ETH_GSTRING_LEN] = {
[NETIF_F_SG_BIT] = "tx-scatter-gather",
[NETIF_F_IP_CSUM_BIT] = "tx-checksum-ipv4",
[NETIF_F_HW_CSUM_BIT] = "tx-checksum-ip-generic",
[NETIF_F_IPV6_CSUM_BIT] = "tx-checksum-ipv6",
[NETIF_F_HIGHDMA_BIT] = "highdma",
[NETIF_F_FRAGLIST_BIT] = "tx-scatter-gather-fraglist",
[NETIF_F_HW_VLAN_CTAG_TX_BIT] = "tx-vlan-hw-insert",
[NETIF_F_HW_VLAN_CTAG_RX_BIT] = "rx-vlan-hw-parse",
[NETIF_F_HW_VLAN_CTAG_FILTER_BIT] = "rx-vlan-filter",
[NETIF_F_HW_VLAN_STAG_TX_BIT] = "tx-vlan-stag-hw-insert",
[NETIF_F_HW_VLAN_STAG_RX_BIT] = "rx-vlan-stag-hw-parse",
[NETIF_F_HW_VLAN_STAG_FILTER_BIT] = "rx-vlan-stag-filter",
[NETIF_F_VLAN_CHALLENGED_BIT] = "vlan-challenged",
[NETIF_F_GSO_BIT] = "tx-generic-segmentation",
[NETIF_F_LLTX_BIT] = "tx-lockless",
[NETIF_F_NETNS_LOCAL_BIT] = "netns-local",
[NETIF_F_GRO_BIT] = "rx-gro",
[NETIF_F_LRO_BIT] = "rx-lro",
[NETIF_F_TSO_BIT] = "tx-tcp-segmentation",
[NETIF_F_UFO_BIT] = "tx-udp-fragmentation",
[NETIF_F_GSO_ROBUST_BIT] = "tx-gso-robust",
[NETIF_F_TSO_ECN_BIT] = "tx-tcp-ecn-segmentation",
[NETIF_F_TSO6_BIT] = "tx-tcp6-segmentation",
[NETIF_F_FSO_BIT] = "tx-fcoe-segmentation",
[NETIF_F_GSO_GRE_BIT] = "tx-gre-segmentation",
[NETIF_F_GSO_UDP_TUNNEL_BIT] = "tx-udp_tnl-segmentation",
MPLS: Add limited GSO support In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-24 05:02:52 +08:00
[NETIF_F_GSO_MPLS_BIT] = "tx-mpls-segmentation",
[NETIF_F_FCOE_CRC_BIT] = "tx-checksum-fcoe-crc",
[NETIF_F_SCTP_CSUM_BIT] = "tx-checksum-sctp",
[NETIF_F_FCOE_MTU_BIT] = "fcoe-mtu",
[NETIF_F_NTUPLE_BIT] = "rx-ntuple-filter",
[NETIF_F_RXHASH_BIT] = "rx-hashing",
[NETIF_F_RXCSUM_BIT] = "rx-checksum",
[NETIF_F_NOCACHE_COPY_BIT] = "tx-nocache-copy",
[NETIF_F_LOOPBACK_BIT] = "loopback",
[NETIF_F_RXFCS_BIT] = "rx-fcs",
[NETIF_F_RXALL_BIT] = "rx-all",
};
static int ethtool_get_features(struct net_device *dev, void __user *useraddr)
{
struct ethtool_gfeatures cmd = {
.cmd = ETHTOOL_GFEATURES,
.size = ETHTOOL_DEV_FEATURE_WORDS,
};
struct ethtool_get_features_block features[ETHTOOL_DEV_FEATURE_WORDS];
u32 __user *sizeaddr;
u32 copy_size;
int i;
/* in case feature bits run out again */
BUILD_BUG_ON(ETHTOOL_DEV_FEATURE_WORDS * sizeof(u32) > sizeof(netdev_features_t));
for (i = 0; i < ETHTOOL_DEV_FEATURE_WORDS; ++i) {
features[i].available = (u32)(dev->hw_features >> (32 * i));
features[i].requested = (u32)(dev->wanted_features >> (32 * i));
features[i].active = (u32)(dev->features >> (32 * i));
features[i].never_changed =
(u32)(NETIF_F_NEVER_CHANGE >> (32 * i));
}
sizeaddr = useraddr + offsetof(struct ethtool_gfeatures, size);
if (get_user(copy_size, sizeaddr))
return -EFAULT;
if (copy_size > ETHTOOL_DEV_FEATURE_WORDS)
copy_size = ETHTOOL_DEV_FEATURE_WORDS;
if (copy_to_user(useraddr, &cmd, sizeof(cmd)))
return -EFAULT;
useraddr += sizeof(cmd);
if (copy_to_user(useraddr, features, copy_size * sizeof(*features)))
return -EFAULT;
return 0;
}
static int ethtool_set_features(struct net_device *dev, void __user *useraddr)
{
struct ethtool_sfeatures cmd;
struct ethtool_set_features_block features[ETHTOOL_DEV_FEATURE_WORDS];
netdev_features_t wanted = 0, valid = 0;
int i, ret = 0;
if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
return -EFAULT;
useraddr += sizeof(cmd);
if (cmd.size != ETHTOOL_DEV_FEATURE_WORDS)
return -EINVAL;
if (copy_from_user(features, useraddr, sizeof(features)))
return -EFAULT;
for (i = 0; i < ETHTOOL_DEV_FEATURE_WORDS; ++i) {
valid |= (netdev_features_t)features[i].valid << (32 * i);
wanted |= (netdev_features_t)features[i].requested << (32 * i);
}
if (valid & ~NETIF_F_ETHTOOL_BITS)
return -EINVAL;
if (valid & ~dev->hw_features) {
valid &= dev->hw_features;
ret |= ETHTOOL_F_UNSUPPORTED;
}
dev->wanted_features &= ~valid;
dev->wanted_features |= wanted & valid;
__netdev_update_features(dev);
if ((dev->wanted_features ^ dev->features) & valid)
ret |= ETHTOOL_F_WISH;
return ret;
}
static int __ethtool_get_sset_count(struct net_device *dev, int sset)
{
const struct ethtool_ops *ops = dev->ethtool_ops;
if (sset == ETH_SS_FEATURES)
return ARRAY_SIZE(netdev_features_strings);
if (ops->get_sset_count && ops->get_strings)
return ops->get_sset_count(dev, sset);
else
return -EOPNOTSUPP;
}
static void __ethtool_get_strings(struct net_device *dev,
u32 stringset, u8 *data)
{
const struct ethtool_ops *ops = dev->ethtool_ops;
if (stringset == ETH_SS_FEATURES)
memcpy(data, netdev_features_strings,
sizeof(netdev_features_strings));
else
/* ops->get_strings is valid because checked earlier */
ops->get_strings(dev, stringset, data);
}
static netdev_features_t ethtool_get_feature_mask(u32 eth_cmd)
{
/* feature masks of legacy discrete ethtool ops */
switch (eth_cmd) {
case ETHTOOL_GTXCSUM:
case ETHTOOL_STXCSUM:
return NETIF_F_ALL_CSUM | NETIF_F_SCTP_CSUM;
case ETHTOOL_GRXCSUM:
case ETHTOOL_SRXCSUM:
return NETIF_F_RXCSUM;
case ETHTOOL_GSG:
case ETHTOOL_SSG:
return NETIF_F_SG;
case ETHTOOL_GTSO:
case ETHTOOL_STSO:
return NETIF_F_ALL_TSO;
case ETHTOOL_GUFO:
case ETHTOOL_SUFO:
return NETIF_F_UFO;
case ETHTOOL_GGSO:
case ETHTOOL_SGSO:
return NETIF_F_GSO;
case ETHTOOL_GGRO:
case ETHTOOL_SGRO:
return NETIF_F_GRO;
default:
BUG();
}
}
static int ethtool_get_one_feature(struct net_device *dev,
char __user *useraddr, u32 ethcmd)
{
netdev_features_t mask = ethtool_get_feature_mask(ethcmd);
struct ethtool_value edata = {
.cmd = ethcmd,
.data = !!(dev->features & mask),
};
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
static int ethtool_set_one_feature(struct net_device *dev,
void __user *useraddr, u32 ethcmd)
{
struct ethtool_value edata;
netdev_features_t mask;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
mask = ethtool_get_feature_mask(ethcmd);
mask &= dev->hw_features;
if (!mask)
return -EOPNOTSUPP;
if (edata.data)
dev->wanted_features |= mask;
else
dev->wanted_features &= ~mask;
__netdev_update_features(dev);
return 0;
}
#define ETH_ALL_FLAGS (ETH_FLAG_LRO | ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN | \
ETH_FLAG_NTUPLE | ETH_FLAG_RXHASH)
#define ETH_ALL_FEATURES (NETIF_F_LRO | NETIF_F_HW_VLAN_CTAG_RX | \
NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_NTUPLE | \
NETIF_F_RXHASH)
static u32 __ethtool_get_flags(struct net_device *dev)
{
u32 flags = 0;
if (dev->features & NETIF_F_LRO)
flags |= ETH_FLAG_LRO;
if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
flags |= ETH_FLAG_RXVLAN;
if (dev->features & NETIF_F_HW_VLAN_CTAG_TX)
flags |= ETH_FLAG_TXVLAN;
if (dev->features & NETIF_F_NTUPLE)
flags |= ETH_FLAG_NTUPLE;
if (dev->features & NETIF_F_RXHASH)
flags |= ETH_FLAG_RXHASH;
return flags;
}
static int __ethtool_set_flags(struct net_device *dev, u32 data)
{
netdev_features_t features = 0, changed;
if (data & ~ETH_ALL_FLAGS)
return -EINVAL;
if (data & ETH_FLAG_LRO)
features |= NETIF_F_LRO;
if (data & ETH_FLAG_RXVLAN)
features |= NETIF_F_HW_VLAN_CTAG_RX;
if (data & ETH_FLAG_TXVLAN)
features |= NETIF_F_HW_VLAN_CTAG_TX;
if (data & ETH_FLAG_NTUPLE)
features |= NETIF_F_NTUPLE;
if (data & ETH_FLAG_RXHASH)
features |= NETIF_F_RXHASH;
/* allow changing only bits set in hw_features */
changed = (features ^ dev->features) & ETH_ALL_FEATURES;
if (changed & ~dev->hw_features)
return (changed & dev->hw_features) ? -EINVAL : -EOPNOTSUPP;
dev->wanted_features =
(dev->wanted_features & ~changed) | (features & changed);
__netdev_update_features(dev);
return 0;
}
int __ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
ASSERT_RTNL();
if (!dev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
memset(cmd, 0, sizeof(struct ethtool_cmd));
cmd->cmd = ETHTOOL_GSET;
return dev->ethtool_ops->get_settings(dev, cmd);
}
EXPORT_SYMBOL(__ethtool_get_settings);
static int ethtool_get_settings(struct net_device *dev, void __user *useraddr)
{
int err;
struct ethtool_cmd cmd;
err = __ethtool_get_settings(dev, &cmd);
if (err < 0)
return err;
if (copy_to_user(useraddr, &cmd, sizeof(cmd)))
return -EFAULT;
return 0;
}
static int ethtool_set_settings(struct net_device *dev, void __user *useraddr)
{
struct ethtool_cmd cmd;
if (!dev->ethtool_ops->set_settings)
return -EOPNOTSUPP;
if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
return -EFAULT;
return dev->ethtool_ops->set_settings(dev, &cmd);
}
static noinline_for_stack int ethtool_get_drvinfo(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_drvinfo info;
const struct ethtool_ops *ops = dev->ethtool_ops;
memset(&info, 0, sizeof(info));
info.cmd = ETHTOOL_GDRVINFO;
if (ops->get_drvinfo) {
ops->get_drvinfo(dev, &info);
} else if (dev->dev.parent && dev->dev.parent->driver) {
strlcpy(info.bus_info, dev_name(dev->dev.parent),
sizeof(info.bus_info));
strlcpy(info.driver, dev->dev.parent->driver->name,
sizeof(info.driver));
} else {
return -EOPNOTSUPP;
}
/*
* this method of obtaining string set info is deprecated;
ethtool: Add direct access to ops->get_sset_count On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 16:21:53 +08:00
* Use ETHTOOL_GSSET_INFO instead.
*/
if (ops->get_sset_count) {
int rc;
rc = ops->get_sset_count(dev, ETH_SS_TEST);
if (rc >= 0)
info.testinfo_len = rc;
rc = ops->get_sset_count(dev, ETH_SS_STATS);
if (rc >= 0)
info.n_stats = rc;
rc = ops->get_sset_count(dev, ETH_SS_PRIV_FLAGS);
if (rc >= 0)
info.n_priv_flags = rc;
}
if (ops->get_regs_len)
info.regdump_len = ops->get_regs_len(dev);
if (ops->get_eeprom_len)
info.eedump_len = ops->get_eeprom_len(dev);
if (copy_to_user(useraddr, &info, sizeof(info)))
return -EFAULT;
return 0;
}
static noinline_for_stack int ethtool_get_sset_info(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_sset_info info;
u64 sset_mask;
int i, idx = 0, n_bits = 0, ret, rc;
u32 *info_buf = NULL;
if (copy_from_user(&info, useraddr, sizeof(info)))
return -EFAULT;
/* store copy of mask, because we zero struct later on */
sset_mask = info.sset_mask;
if (!sset_mask)
return 0;
/* calculate size of return buffer */
ethtool: Add direct access to ops->get_sset_count On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-04 16:21:53 +08:00
n_bits = hweight64(sset_mask);
memset(&info, 0, sizeof(info));
info.cmd = ETHTOOL_GSSET_INFO;
info_buf = kzalloc(n_bits * sizeof(u32), GFP_USER);
if (!info_buf)
return -ENOMEM;
/*
* fill return buffer based on input bitmask and successful
* get_sset_count return
*/
for (i = 0; i < 64; i++) {
if (!(sset_mask & (1ULL << i)))
continue;
rc = __ethtool_get_sset_count(dev, i);
if (rc >= 0) {
info.sset_mask |= (1ULL << i);
info_buf[idx++] = rc;
}
}
ret = -EFAULT;
if (copy_to_user(useraddr, &info, sizeof(info)))
goto out;
useraddr += offsetof(struct ethtool_sset_info, data);
if (copy_to_user(useraddr, info_buf, idx * sizeof(u32)))
goto out;
ret = 0;
out:
kfree(info_buf);
return ret;
}
static noinline_for_stack int ethtool_set_rxnfc(struct net_device *dev,
u32 cmd, void __user *useraddr)
{
struct ethtool_rxnfc info;
size_t info_size = sizeof(info);
int rc;
if (!dev->ethtool_ops->set_rxnfc)
return -EOPNOTSUPP;
/* struct ethtool_rxnfc was originally defined for
* ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
* members. User-space might still be using that
* definition. */
if (cmd == ETHTOOL_SRXFH)
info_size = (offsetof(struct ethtool_rxnfc, data) +
sizeof(info.data));
if (copy_from_user(&info, useraddr, info_size))
return -EFAULT;
rc = dev->ethtool_ops->set_rxnfc(dev, &info);
if (rc)
return rc;
if (cmd == ETHTOOL_SRXCLSRLINS &&
copy_to_user(useraddr, &info, info_size))
return -EFAULT;
return 0;
}
static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev,
u32 cmd, void __user *useraddr)
{
struct ethtool_rxnfc info;
size_t info_size = sizeof(info);
const struct ethtool_ops *ops = dev->ethtool_ops;
int ret;
void *rule_buf = NULL;
if (!ops->get_rxnfc)
return -EOPNOTSUPP;
/* struct ethtool_rxnfc was originally defined for
* ETHTOOL_{G,S}RXFH with only the cmd, flow_type and data
* members. User-space might still be using that
* definition. */
if (cmd == ETHTOOL_GRXFH)
info_size = (offsetof(struct ethtool_rxnfc, data) +
sizeof(info.data));
if (copy_from_user(&info, useraddr, info_size))
return -EFAULT;
if (info.cmd == ETHTOOL_GRXCLSRLALL) {
if (info.rule_cnt > 0) {
if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32))
rule_buf = kzalloc(info.rule_cnt * sizeof(u32),
GFP_USER);
if (!rule_buf)
return -ENOMEM;
}
}
ret = ops->get_rxnfc(dev, &info, rule_buf);
if (ret < 0)
goto err_out;
ret = -EFAULT;
if (copy_to_user(useraddr, &info, info_size))
goto err_out;
if (rule_buf) {
useraddr += offsetof(struct ethtool_rxnfc, rule_locs);
if (copy_to_user(useraddr, rule_buf,
info.rule_cnt * sizeof(u32)))
goto err_out;
}
ret = 0;
err_out:
kfree(rule_buf);
return ret;
}
static noinline_for_stack int ethtool_get_rxfh_indir(struct net_device *dev,
void __user *useraddr)
{
u32 user_size, dev_size;
u32 *indir;
int ret;
if (!dev->ethtool_ops->get_rxfh_indir_size ||
!dev->ethtool_ops->get_rxfh_indir)
return -EOPNOTSUPP;
dev_size = dev->ethtool_ops->get_rxfh_indir_size(dev);
if (dev_size == 0)
return -EOPNOTSUPP;
if (copy_from_user(&user_size,
useraddr + offsetof(struct ethtool_rxfh_indir, size),
sizeof(user_size)))
return -EFAULT;
if (copy_to_user(useraddr + offsetof(struct ethtool_rxfh_indir, size),
&dev_size, sizeof(dev_size)))
return -EFAULT;
/* If the user buffer size is 0, this is just a query for the
* device table size. Otherwise, if it's smaller than the
* device table size it's an error.
*/
if (user_size < dev_size)
return user_size == 0 ? 0 : -EINVAL;
indir = kcalloc(dev_size, sizeof(indir[0]), GFP_USER);
if (!indir)
return -ENOMEM;
ret = dev->ethtool_ops->get_rxfh_indir(dev, indir);
if (ret)
goto out;
if (copy_to_user(useraddr +
offsetof(struct ethtool_rxfh_indir, ring_index[0]),
indir, dev_size * sizeof(indir[0])))
ret = -EFAULT;
out:
kfree(indir);
return ret;
}
static noinline_for_stack int ethtool_set_rxfh_indir(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_rxnfc rx_rings;
u32 user_size, dev_size, i;
u32 *indir;
const struct ethtool_ops *ops = dev->ethtool_ops;
int ret;
if (!ops->get_rxfh_indir_size || !ops->set_rxfh_indir ||
!ops->get_rxnfc)
return -EOPNOTSUPP;
dev_size = ops->get_rxfh_indir_size(dev);
if (dev_size == 0)
return -EOPNOTSUPP;
if (copy_from_user(&user_size,
useraddr + offsetof(struct ethtool_rxfh_indir, size),
sizeof(user_size)))
return -EFAULT;
if (user_size != 0 && user_size != dev_size)
return -EINVAL;
indir = kcalloc(dev_size, sizeof(indir[0]), GFP_USER);
if (!indir)
return -ENOMEM;
rx_rings.cmd = ETHTOOL_GRXRINGS;
ret = ops->get_rxnfc(dev, &rx_rings, NULL);
if (ret)
goto out;
if (user_size == 0) {
for (i = 0; i < dev_size; i++)
indir[i] = ethtool_rxfh_indir_default(i, rx_rings.data);
} else {
if (copy_from_user(indir,
useraddr +
offsetof(struct ethtool_rxfh_indir,
ring_index[0]),
dev_size * sizeof(indir[0]))) {
ret = -EFAULT;
goto out;
}
/* Validate ring indices */
for (i = 0; i < dev_size; i++) {
if (indir[i] >= rx_rings.data) {
ret = -EINVAL;
goto out;
}
}
}
ret = ops->set_rxfh_indir(dev, indir);
out:
kfree(indir);
return ret;
}
static int ethtool_get_regs(struct net_device *dev, char __user *useraddr)
{
struct ethtool_regs regs;
const struct ethtool_ops *ops = dev->ethtool_ops;
void *regbuf;
int reglen, ret;
if (!ops->get_regs || !ops->get_regs_len)
return -EOPNOTSUPP;
if (copy_from_user(&regs, useraddr, sizeof(regs)))
return -EFAULT;
reglen = ops->get_regs_len(dev);
if (regs.len > reglen)
regs.len = reglen;
regbuf = vzalloc(reglen);
if (reglen && !regbuf)
return -ENOMEM;
ops->get_regs(dev, &regs, regbuf);
ret = -EFAULT;
if (copy_to_user(useraddr, &regs, sizeof(regs)))
goto out;
useraddr += offsetof(struct ethtool_regs, data);
if (regbuf && copy_to_user(useraddr, regbuf, regs.len))
goto out;
ret = 0;
out:
vfree(regbuf);
return ret;
}
static int ethtool_reset(struct net_device *dev, char __user *useraddr)
{
struct ethtool_value reset;
int ret;
if (!dev->ethtool_ops->reset)
return -EOPNOTSUPP;
if (copy_from_user(&reset, useraddr, sizeof(reset)))
return -EFAULT;
ret = dev->ethtool_ops->reset(dev, &reset.data);
if (ret)
return ret;
if (copy_to_user(useraddr, &reset, sizeof(reset)))
return -EFAULT;
return 0;
}
static int ethtool_get_wol(struct net_device *dev, char __user *useraddr)
{
struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
if (!dev->ethtool_ops->get_wol)
return -EOPNOTSUPP;
dev->ethtool_ops->get_wol(dev, &wol);
if (copy_to_user(useraddr, &wol, sizeof(wol)))
return -EFAULT;
return 0;
}
static int ethtool_set_wol(struct net_device *dev, char __user *useraddr)
{
struct ethtool_wolinfo wol;
if (!dev->ethtool_ops->set_wol)
return -EOPNOTSUPP;
if (copy_from_user(&wol, useraddr, sizeof(wol)))
return -EFAULT;
return dev->ethtool_ops->set_wol(dev, &wol);
}
static int ethtool_get_eee(struct net_device *dev, char __user *useraddr)
{
struct ethtool_eee edata;
int rc;
if (!dev->ethtool_ops->get_eee)
return -EOPNOTSUPP;
memset(&edata, 0, sizeof(struct ethtool_eee));
edata.cmd = ETHTOOL_GEEE;
rc = dev->ethtool_ops->get_eee(dev, &edata);
if (rc)
return rc;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
static int ethtool_set_eee(struct net_device *dev, char __user *useraddr)
{
struct ethtool_eee edata;
if (!dev->ethtool_ops->set_eee)
return -EOPNOTSUPP;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
return dev->ethtool_ops->set_eee(dev, &edata);
}
static int ethtool_nway_reset(struct net_device *dev)
{
if (!dev->ethtool_ops->nway_reset)
return -EOPNOTSUPP;
return dev->ethtool_ops->nway_reset(dev);
}
static int ethtool_get_link(struct net_device *dev, char __user *useraddr)
{
struct ethtool_value edata = { .cmd = ETHTOOL_GLINK };
if (!dev->ethtool_ops->get_link)
return -EOPNOTSUPP;
edata.data = netif_running(dev) && dev->ethtool_ops->get_link(dev);
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
static int ethtool_get_any_eeprom(struct net_device *dev, void __user *useraddr,
int (*getter)(struct net_device *,
struct ethtool_eeprom *, u8 *),
u32 total_len)
{
struct ethtool_eeprom eeprom;
void __user *userbuf = useraddr + sizeof(eeprom);
u32 bytes_remaining;
u8 *data;
int ret = 0;
if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
return -EFAULT;
/* Check for wrap and zero */
if (eeprom.offset + eeprom.len <= eeprom.offset)
return -EINVAL;
/* Check for exceeding total eeprom len */
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
data = kmalloc(PAGE_SIZE, GFP_USER);
if (!data)
return -ENOMEM;
bytes_remaining = eeprom.len;
while (bytes_remaining > 0) {
eeprom.len = min(bytes_remaining, (u32)PAGE_SIZE);
ret = getter(dev, &eeprom, data);
if (ret)
break;
if (copy_to_user(userbuf, data, eeprom.len)) {
ret = -EFAULT;
break;
}
userbuf += eeprom.len;
eeprom.offset += eeprom.len;
bytes_remaining -= eeprom.len;
}
eeprom.len = userbuf - (useraddr + sizeof(eeprom));
eeprom.offset -= eeprom.len;
if (copy_to_user(useraddr, &eeprom, sizeof(eeprom)))
ret = -EFAULT;
kfree(data);
return ret;
}
static int ethtool_get_eeprom(struct net_device *dev, void __user *useraddr)
{
const struct ethtool_ops *ops = dev->ethtool_ops;
if (!ops->get_eeprom || !ops->get_eeprom_len)
return -EOPNOTSUPP;
return ethtool_get_any_eeprom(dev, useraddr, ops->get_eeprom,
ops->get_eeprom_len(dev));
}
static int ethtool_set_eeprom(struct net_device *dev, void __user *useraddr)
{
struct ethtool_eeprom eeprom;
const struct ethtool_ops *ops = dev->ethtool_ops;
void __user *userbuf = useraddr + sizeof(eeprom);
u32 bytes_remaining;
u8 *data;
int ret = 0;
if (!ops->set_eeprom || !ops->get_eeprom_len)
return -EOPNOTSUPP;
if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
return -EFAULT;
/* Check for wrap and zero */
if (eeprom.offset + eeprom.len <= eeprom.offset)
return -EINVAL;
/* Check for exceeding total eeprom len */
if (eeprom.offset + eeprom.len > ops->get_eeprom_len(dev))
return -EINVAL;
data = kmalloc(PAGE_SIZE, GFP_USER);
if (!data)
return -ENOMEM;
bytes_remaining = eeprom.len;
while (bytes_remaining > 0) {
eeprom.len = min(bytes_remaining, (u32)PAGE_SIZE);
if (copy_from_user(data, userbuf, eeprom.len)) {
ret = -EFAULT;
break;
}
ret = ops->set_eeprom(dev, &eeprom, data);
if (ret)
break;
userbuf += eeprom.len;
eeprom.offset += eeprom.len;
bytes_remaining -= eeprom.len;
}
kfree(data);
return ret;
}
static noinline_for_stack int ethtool_get_coalesce(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_coalesce coalesce = { .cmd = ETHTOOL_GCOALESCE };
if (!dev->ethtool_ops->get_coalesce)
return -EOPNOTSUPP;
dev->ethtool_ops->get_coalesce(dev, &coalesce);
if (copy_to_user(useraddr, &coalesce, sizeof(coalesce)))
return -EFAULT;
return 0;
}
static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_coalesce coalesce;
if (!dev->ethtool_ops->set_coalesce)
return -EOPNOTSUPP;
if (copy_from_user(&coalesce, useraddr, sizeof(coalesce)))
return -EFAULT;
return dev->ethtool_ops->set_coalesce(dev, &coalesce);
}
static int ethtool_get_ringparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_ringparam ringparam = { .cmd = ETHTOOL_GRINGPARAM };
if (!dev->ethtool_ops->get_ringparam)
return -EOPNOTSUPP;
dev->ethtool_ops->get_ringparam(dev, &ringparam);
if (copy_to_user(useraddr, &ringparam, sizeof(ringparam)))
return -EFAULT;
return 0;
}
static int ethtool_set_ringparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_ringparam ringparam;
if (!dev->ethtool_ops->set_ringparam)
return -EOPNOTSUPP;
if (copy_from_user(&ringparam, useraddr, sizeof(ringparam)))
return -EFAULT;
return dev->ethtool_ops->set_ringparam(dev, &ringparam);
}
static noinline_for_stack int ethtool_get_channels(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_channels channels = { .cmd = ETHTOOL_GCHANNELS };
if (!dev->ethtool_ops->get_channels)
return -EOPNOTSUPP;
dev->ethtool_ops->get_channels(dev, &channels);
if (copy_to_user(useraddr, &channels, sizeof(channels)))
return -EFAULT;
return 0;
}
static noinline_for_stack int ethtool_set_channels(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_channels channels;
if (!dev->ethtool_ops->set_channels)
return -EOPNOTSUPP;
if (copy_from_user(&channels, useraddr, sizeof(channels)))
return -EFAULT;
return dev->ethtool_ops->set_channels(dev, &channels);
}
static int ethtool_get_pauseparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_pauseparam pauseparam = { ETHTOOL_GPAUSEPARAM };
if (!dev->ethtool_ops->get_pauseparam)
return -EOPNOTSUPP;
dev->ethtool_ops->get_pauseparam(dev, &pauseparam);
if (copy_to_user(useraddr, &pauseparam, sizeof(pauseparam)))
return -EFAULT;
return 0;
}
static int ethtool_set_pauseparam(struct net_device *dev, void __user *useraddr)
{
struct ethtool_pauseparam pauseparam;
if (!dev->ethtool_ops->set_pauseparam)
return -EOPNOTSUPP;
if (copy_from_user(&pauseparam, useraddr, sizeof(pauseparam)))
return -EFAULT;
return dev->ethtool_ops->set_pauseparam(dev, &pauseparam);
}
static int ethtool_self_test(struct net_device *dev, char __user *useraddr)
{
struct ethtool_test test;
const struct ethtool_ops *ops = dev->ethtool_ops;
u64 *data;
int ret, test_len;
if (!ops->self_test || !ops->get_sset_count)
return -EOPNOTSUPP;
test_len = ops->get_sset_count(dev, ETH_SS_TEST);
if (test_len < 0)
return test_len;
WARN_ON(test_len == 0);
if (copy_from_user(&test, useraddr, sizeof(test)))
return -EFAULT;
test.len = test_len;
data = kmalloc(test_len * sizeof(u64), GFP_USER);
if (!data)
return -ENOMEM;
ops->self_test(dev, &test, data);
ret = -EFAULT;
if (copy_to_user(useraddr, &test, sizeof(test)))
goto out;
useraddr += sizeof(test);
if (copy_to_user(useraddr, data, test.len * sizeof(u64)))
goto out;
ret = 0;
out:
kfree(data);
return ret;
}
static int ethtool_get_strings(struct net_device *dev, void __user *useraddr)
{
struct ethtool_gstrings gstrings;
u8 *data;
int ret;
if (copy_from_user(&gstrings, useraddr, sizeof(gstrings)))
return -EFAULT;
ret = __ethtool_get_sset_count(dev, gstrings.string_set);
if (ret < 0)
return ret;
gstrings.len = ret;
data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
if (!data)
return -ENOMEM;
__ethtool_get_strings(dev, gstrings.string_set, data);
ret = -EFAULT;
if (copy_to_user(useraddr, &gstrings, sizeof(gstrings)))
goto out;
useraddr += sizeof(gstrings);
if (copy_to_user(useraddr, data, gstrings.len * ETH_GSTRING_LEN))
goto out;
ret = 0;
out:
kfree(data);
return ret;
}
static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
{
struct ethtool_value id;
static bool busy;
const struct ethtool_ops *ops = dev->ethtool_ops;
int rc;
if (!ops->set_phys_id)
return -EOPNOTSUPP;
if (busy)
return -EBUSY;
if (copy_from_user(&id, useraddr, sizeof(id)))
return -EFAULT;
rc = ops->set_phys_id(dev, ETHTOOL_ID_ACTIVE);
ethtool: allow custom interval for physical identification When physical identification of an adapter is done by toggling the mechanism on and off through software utilizing the set_phys_id operation, it is done with a fixed duration for both on and off states. Some drivers may want to set a custom duration for the on/off intervals. This patch changes the API so the return code from the driver's entry point when it is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to cycle the on/off states, and updates the drivers that have already been converted to use the new set_phys_id and use the synchronous method for identifying an adapter. The physical identification frequency set in the updated drivers is based on how it was done prior to the introduction of set_phys_id. Compile tested only. Also fixes a compiler warning in sfc. v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE v3: fold patchset into single patch and cleanup per Ben's feedback Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: Don Fry <pcnet32@frontier.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Steve Hodgson <shodgson@solarflare.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 21:09:10 +08:00
if (rc < 0)
return rc;
/* Drop the RTNL lock while waiting, but prevent reentry or
* removal of the device.
*/
busy = true;
dev_hold(dev);
rtnl_unlock();
if (rc == 0) {
/* Driver will handle this itself */
schedule_timeout_interruptible(
id.data ? (id.data * HZ) : MAX_SCHEDULE_TIMEOUT);
} else {
ethtool: allow custom interval for physical identification When physical identification of an adapter is done by toggling the mechanism on and off through software utilizing the set_phys_id operation, it is done with a fixed duration for both on and off states. Some drivers may want to set a custom duration for the on/off intervals. This patch changes the API so the return code from the driver's entry point when it is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to cycle the on/off states, and updates the drivers that have already been converted to use the new set_phys_id and use the synchronous method for identifying an adapter. The physical identification frequency set in the updated drivers is based on how it was done prior to the introduction of set_phys_id. Compile tested only. Also fixes a compiler warning in sfc. v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE v3: fold patchset into single patch and cleanup per Ben's feedback Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: Don Fry <pcnet32@frontier.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Steve Hodgson <shodgson@solarflare.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 21:09:10 +08:00
/* Driver expects to be called at twice the frequency in rc */
int n = rc * 2, i, interval = HZ / n;
/* Count down seconds */
do {
ethtool: allow custom interval for physical identification When physical identification of an adapter is done by toggling the mechanism on and off through software utilizing the set_phys_id operation, it is done with a fixed duration for both on and off states. Some drivers may want to set a custom duration for the on/off intervals. This patch changes the API so the return code from the driver's entry point when it is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to cycle the on/off states, and updates the drivers that have already been converted to use the new set_phys_id and use the synchronous method for identifying an adapter. The physical identification frequency set in the updated drivers is based on how it was done prior to the introduction of set_phys_id. Compile tested only. Also fixes a compiler warning in sfc. v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE v3: fold patchset into single patch and cleanup per Ben's feedback Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: Don Fry <pcnet32@frontier.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Steve Hodgson <shodgson@solarflare.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 21:09:10 +08:00
/* Count down iterations per second */
i = n;
do {
rtnl_lock();
rc = ops->set_phys_id(dev,
ethtool: allow custom interval for physical identification When physical identification of an adapter is done by toggling the mechanism on and off through software utilizing the set_phys_id operation, it is done with a fixed duration for both on and off states. Some drivers may want to set a custom duration for the on/off intervals. This patch changes the API so the return code from the driver's entry point when it is called with ETHTOOL_ID_ACTIVE can specify the frequency at which to cycle the on/off states, and updates the drivers that have already been converted to use the new set_phys_id and use the synchronous method for identifying an adapter. The physical identification frequency set in the updated drivers is based on how it was done prior to the introduction of set_phys_id. Compile tested only. Also fixes a compiler warning in sfc. v2: drivers do not return -EINVAL for ETHOOL_ID_ACTIVE v3: fold patchset into single patch and cleanup per Ben's feedback Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: Don Fry <pcnet32@frontier.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Steve Hodgson <shodgson@solarflare.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Matt Carlson <mcarlson@broadcom.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13 21:09:10 +08:00
(i & 1) ? ETHTOOL_ID_OFF : ETHTOOL_ID_ON);
rtnl_unlock();
if (rc)
break;
schedule_timeout_interruptible(interval);
} while (!signal_pending(current) && --i != 0);
} while (!signal_pending(current) &&
(id.data == 0 || --id.data != 0));
}
rtnl_lock();
dev_put(dev);
busy = false;
(void) ops->set_phys_id(dev, ETHTOOL_ID_INACTIVE);
return rc;
}
static int ethtool_get_stats(struct net_device *dev, void __user *useraddr)
{
struct ethtool_stats stats;
const struct ethtool_ops *ops = dev->ethtool_ops;
u64 *data;
int ret, n_stats;
if (!ops->get_ethtool_stats || !ops->get_sset_count)
return -EOPNOTSUPP;
n_stats = ops->get_sset_count(dev, ETH_SS_STATS);
if (n_stats < 0)
return n_stats;
WARN_ON(n_stats == 0);
if (copy_from_user(&stats, useraddr, sizeof(stats)))
return -EFAULT;
stats.n_stats = n_stats;
data = kmalloc(n_stats * sizeof(u64), GFP_USER);
if (!data)
return -ENOMEM;
ops->get_ethtool_stats(dev, &stats, data);
ret = -EFAULT;
if (copy_to_user(useraddr, &stats, sizeof(stats)))
goto out;
useraddr += sizeof(stats);
if (copy_to_user(useraddr, data, stats.n_stats * sizeof(u64)))
goto out;
ret = 0;
out:
kfree(data);
return ret;
}
static int ethtool_get_perm_addr(struct net_device *dev, void __user *useraddr)
{
struct ethtool_perm_addr epaddr;
if (copy_from_user(&epaddr, useraddr, sizeof(epaddr)))
return -EFAULT;
if (epaddr.size < dev->addr_len)
return -ETOOSMALL;
epaddr.size = dev->addr_len;
if (copy_to_user(useraddr, &epaddr, sizeof(epaddr)))
return -EFAULT;
useraddr += sizeof(epaddr);
if (copy_to_user(useraddr, dev->perm_addr, epaddr.size))
return -EFAULT;
return 0;
}
static int ethtool_get_value(struct net_device *dev, char __user *useraddr,
u32 cmd, u32 (*actor)(struct net_device *))
{
struct ethtool_value edata = { .cmd = cmd };
if (!actor)
return -EOPNOTSUPP;
edata.data = actor(dev);
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
static int ethtool_set_value_void(struct net_device *dev, char __user *useraddr,
void (*actor)(struct net_device *, u32))
{
struct ethtool_value edata;
if (!actor)
return -EOPNOTSUPP;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
actor(dev, edata.data);
return 0;
}
static int ethtool_set_value(struct net_device *dev, char __user *useraddr,
int (*actor)(struct net_device *, u32))
{
struct ethtool_value edata;
if (!actor)
return -EOPNOTSUPP;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
return actor(dev, edata.data);
}
static noinline_for_stack int ethtool_flash_device(struct net_device *dev,
char __user *useraddr)
{
struct ethtool_flash efl;
if (copy_from_user(&efl, useraddr, sizeof(efl)))
return -EFAULT;
if (!dev->ethtool_ops->flash_device)
return -EOPNOTSUPP;
efl.data[ETHTOOL_FLASH_MAX_FILENAME - 1] = 0;
return dev->ethtool_ops->flash_device(dev, &efl);
}
static int ethtool_set_dump(struct net_device *dev,
void __user *useraddr)
{
struct ethtool_dump dump;
if (!dev->ethtool_ops->set_dump)
return -EOPNOTSUPP;
if (copy_from_user(&dump, useraddr, sizeof(dump)))
return -EFAULT;
return dev->ethtool_ops->set_dump(dev, &dump);
}
static int ethtool_get_dump_flag(struct net_device *dev,
void __user *useraddr)
{
int ret;
struct ethtool_dump dump;
const struct ethtool_ops *ops = dev->ethtool_ops;
if (!ops->get_dump_flag)
return -EOPNOTSUPP;
if (copy_from_user(&dump, useraddr, sizeof(dump)))
return -EFAULT;
ret = ops->get_dump_flag(dev, &dump);
if (ret)
return ret;
if (copy_to_user(useraddr, &dump, sizeof(dump)))
return -EFAULT;
return 0;
}
static int ethtool_get_dump_data(struct net_device *dev,
void __user *useraddr)
{
int ret;
__u32 len;
struct ethtool_dump dump, tmp;
const struct ethtool_ops *ops = dev->ethtool_ops;
void *data = NULL;
if (!ops->get_dump_data || !ops->get_dump_flag)
return -EOPNOTSUPP;
if (copy_from_user(&dump, useraddr, sizeof(dump)))
return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.cmd = ETHTOOL_GET_DUMP_FLAG;
ret = ops->get_dump_flag(dev, &tmp);
if (ret)
return ret;
len = min(tmp.len, dump.len);
if (!len)
return -EFAULT;
/* Don't ever let the driver think there's more space available
* than it requested with .get_dump_flag().
*/
dump.len = len;
/* Always allocate enough space to hold the whole thing so that the
* driver does not need to check the length and bother with partial
* dumping.
*/
data = vzalloc(tmp.len);
if (!data)
return -ENOMEM;
ret = ops->get_dump_data(dev, &dump, data);
if (ret)
goto out;
/* There are two sane possibilities:
* 1. The driver's .get_dump_data() does not touch dump.len.
* 2. Or it may set dump.len to how much it really writes, which
* should be tmp.len (or len if it can do a partial dump).
* In any case respond to userspace with the actual length of data
* it's receiving.
*/
WARN_ON(dump.len != len && dump.len != tmp.len);
dump.len = len;
if (copy_to_user(useraddr, &dump, sizeof(dump))) {
ret = -EFAULT;
goto out;
}
useraddr += offsetof(struct ethtool_dump, data);
if (copy_to_user(useraddr, data, len))
ret = -EFAULT;
out:
vfree(data);
return ret;
}
static int ethtool_get_ts_info(struct net_device *dev, void __user *useraddr)
{
int err = 0;
struct ethtool_ts_info info;
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
memset(&info, 0, sizeof(info));
info.cmd = ETHTOOL_GET_TS_INFO;
if (phydev && phydev->drv && phydev->drv->ts_info) {
err = phydev->drv->ts_info(phydev, &info);
} else if (ops->get_ts_info) {
err = ops->get_ts_info(dev, &info);
} else {
info.so_timestamping =
SOF_TIMESTAMPING_RX_SOFTWARE |
SOF_TIMESTAMPING_SOFTWARE;
info.phc_index = -1;
}
if (err)
return err;
if (copy_to_user(useraddr, &info, sizeof(info)))
err = -EFAULT;
return err;
}
static int ethtool_get_module_info(struct net_device *dev,
void __user *useraddr)
{
int ret;
struct ethtool_modinfo modinfo;
const struct ethtool_ops *ops = dev->ethtool_ops;
if (!ops->get_module_info)
return -EOPNOTSUPP;
if (copy_from_user(&modinfo, useraddr, sizeof(modinfo)))
return -EFAULT;
ret = ops->get_module_info(dev, &modinfo);
if (ret)
return ret;
if (copy_to_user(useraddr, &modinfo, sizeof(modinfo)))
return -EFAULT;
return 0;
}
static int ethtool_get_module_eeprom(struct net_device *dev,
void __user *useraddr)
{
int ret;
struct ethtool_modinfo modinfo;
const struct ethtool_ops *ops = dev->ethtool_ops;
if (!ops->get_module_info || !ops->get_module_eeprom)
return -EOPNOTSUPP;
ret = ops->get_module_info(dev, &modinfo);
if (ret)
return ret;
return ethtool_get_any_eeprom(dev, useraddr, ops->get_module_eeprom,
modinfo.eeprom_len);
}
/* The main entry point in this file. Called from net/core/dev_ioctl.c */
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:56:21 +08:00
int dev_ethtool(struct net *net, struct ifreq *ifr)
{
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:56:21 +08:00
struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name);
void __user *useraddr = ifr->ifr_data;
u32 ethcmd;
int rc;
netdev_features_t old_features;
if (!dev || !netif_device_present(dev))
return -ENODEV;
if (copy_from_user(&ethcmd, useraddr, sizeof(ethcmd)))
return -EFAULT;
/* Allow some commands to be done by anyone */
switch (ethcmd) {
case ETHTOOL_GSET:
case ETHTOOL_GDRVINFO:
case ETHTOOL_GMSGLVL:
case ETHTOOL_GLINK:
case ETHTOOL_GCOALESCE:
case ETHTOOL_GRINGPARAM:
case ETHTOOL_GPAUSEPARAM:
case ETHTOOL_GRXCSUM:
case ETHTOOL_GTXCSUM:
case ETHTOOL_GSG:
case ETHTOOL_GSSET_INFO:
case ETHTOOL_GSTRINGS:
case ETHTOOL_GSTATS:
case ETHTOOL_GTSO:
case ETHTOOL_GPERMADDR:
case ETHTOOL_GUFO:
case ETHTOOL_GGSO:
case ETHTOOL_GGRO:
case ETHTOOL_GFLAGS:
case ETHTOOL_GPFLAGS:
case ETHTOOL_GRXFH:
case ETHTOOL_GRXRINGS:
case ETHTOOL_GRXCLSRLCNT:
case ETHTOOL_GRXCLSRULE:
case ETHTOOL_GRXCLSRLALL:
case ETHTOOL_GRXFHINDIR:
case ETHTOOL_GFEATURES:
case ETHTOOL_GCHANNELS:
case ETHTOOL_GET_TS_INFO:
case ETHTOOL_GEEE:
break;
default:
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
}
if (dev->ethtool_ops->begin) {
rc = dev->ethtool_ops->begin(dev);
if (rc < 0)
return rc;
}
old_features = dev->features;
switch (ethcmd) {
case ETHTOOL_GSET:
rc = ethtool_get_settings(dev, useraddr);
break;
case ETHTOOL_SSET:
rc = ethtool_set_settings(dev, useraddr);
break;
case ETHTOOL_GDRVINFO:
rc = ethtool_get_drvinfo(dev, useraddr);
break;
case ETHTOOL_GREGS:
rc = ethtool_get_regs(dev, useraddr);
break;
case ETHTOOL_GWOL:
rc = ethtool_get_wol(dev, useraddr);
break;
case ETHTOOL_SWOL:
rc = ethtool_set_wol(dev, useraddr);
break;
case ETHTOOL_GMSGLVL:
rc = ethtool_get_value(dev, useraddr, ethcmd,
dev->ethtool_ops->get_msglevel);
break;
case ETHTOOL_SMSGLVL:
rc = ethtool_set_value_void(dev, useraddr,
dev->ethtool_ops->set_msglevel);
break;
case ETHTOOL_GEEE:
rc = ethtool_get_eee(dev, useraddr);
break;
case ETHTOOL_SEEE:
rc = ethtool_set_eee(dev, useraddr);
break;
case ETHTOOL_NWAY_RST:
rc = ethtool_nway_reset(dev);
break;
case ETHTOOL_GLINK:
rc = ethtool_get_link(dev, useraddr);
break;
case ETHTOOL_GEEPROM:
rc = ethtool_get_eeprom(dev, useraddr);
break;
case ETHTOOL_SEEPROM:
rc = ethtool_set_eeprom(dev, useraddr);
break;
case ETHTOOL_GCOALESCE:
rc = ethtool_get_coalesce(dev, useraddr);
break;
case ETHTOOL_SCOALESCE:
rc = ethtool_set_coalesce(dev, useraddr);
break;
case ETHTOOL_GRINGPARAM:
rc = ethtool_get_ringparam(dev, useraddr);
break;
case ETHTOOL_SRINGPARAM:
rc = ethtool_set_ringparam(dev, useraddr);
break;
case ETHTOOL_GPAUSEPARAM:
rc = ethtool_get_pauseparam(dev, useraddr);
break;
case ETHTOOL_SPAUSEPARAM:
rc = ethtool_set_pauseparam(dev, useraddr);
break;
case ETHTOOL_TEST:
rc = ethtool_self_test(dev, useraddr);
break;
case ETHTOOL_GSTRINGS:
rc = ethtool_get_strings(dev, useraddr);
break;
case ETHTOOL_PHYS_ID:
rc = ethtool_phys_id(dev, useraddr);
break;
case ETHTOOL_GSTATS:
rc = ethtool_get_stats(dev, useraddr);
break;
case ETHTOOL_GPERMADDR:
rc = ethtool_get_perm_addr(dev, useraddr);
break;
case ETHTOOL_GFLAGS:
rc = ethtool_get_value(dev, useraddr, ethcmd,
__ethtool_get_flags);
break;
case ETHTOOL_SFLAGS:
rc = ethtool_set_value(dev, useraddr, __ethtool_set_flags);
break;
case ETHTOOL_GPFLAGS:
rc = ethtool_get_value(dev, useraddr, ethcmd,
dev->ethtool_ops->get_priv_flags);
break;
case ETHTOOL_SPFLAGS:
rc = ethtool_set_value(dev, useraddr,
dev->ethtool_ops->set_priv_flags);
break;
case ETHTOOL_GRXFH:
case ETHTOOL_GRXRINGS:
case ETHTOOL_GRXCLSRLCNT:
case ETHTOOL_GRXCLSRULE:
case ETHTOOL_GRXCLSRLALL:
rc = ethtool_get_rxnfc(dev, ethcmd, useraddr);
break;
case ETHTOOL_SRXFH:
case ETHTOOL_SRXCLSRLDEL:
case ETHTOOL_SRXCLSRLINS:
rc = ethtool_set_rxnfc(dev, ethcmd, useraddr);
break;
case ETHTOOL_FLASHDEV:
rc = ethtool_flash_device(dev, useraddr);
break;
case ETHTOOL_RESET:
rc = ethtool_reset(dev, useraddr);
break;
case ETHTOOL_GSSET_INFO:
rc = ethtool_get_sset_info(dev, useraddr);
break;
case ETHTOOL_GRXFHINDIR:
rc = ethtool_get_rxfh_indir(dev, useraddr);
break;
case ETHTOOL_SRXFHINDIR:
rc = ethtool_set_rxfh_indir(dev, useraddr);
break;
case ETHTOOL_GFEATURES:
rc = ethtool_get_features(dev, useraddr);
break;
case ETHTOOL_SFEATURES:
rc = ethtool_set_features(dev, useraddr);
break;
case ETHTOOL_GTXCSUM:
case ETHTOOL_GRXCSUM:
case ETHTOOL_GSG:
case ETHTOOL_GTSO:
case ETHTOOL_GUFO:
case ETHTOOL_GGSO:
case ETHTOOL_GGRO:
rc = ethtool_get_one_feature(dev, useraddr, ethcmd);
break;
case ETHTOOL_STXCSUM:
case ETHTOOL_SRXCSUM:
case ETHTOOL_SSG:
case ETHTOOL_STSO:
case ETHTOOL_SUFO:
case ETHTOOL_SGSO:
case ETHTOOL_SGRO:
rc = ethtool_set_one_feature(dev, useraddr, ethcmd);
break;
case ETHTOOL_GCHANNELS:
rc = ethtool_get_channels(dev, useraddr);
break;
case ETHTOOL_SCHANNELS:
rc = ethtool_set_channels(dev, useraddr);
break;
case ETHTOOL_SET_DUMP:
rc = ethtool_set_dump(dev, useraddr);
break;
case ETHTOOL_GET_DUMP_FLAG:
rc = ethtool_get_dump_flag(dev, useraddr);
break;
case ETHTOOL_GET_DUMP_DATA:
rc = ethtool_get_dump_data(dev, useraddr);
break;
case ETHTOOL_GET_TS_INFO:
rc = ethtool_get_ts_info(dev, useraddr);
break;
case ETHTOOL_GMODULEINFO:
rc = ethtool_get_module_info(dev, useraddr);
break;
case ETHTOOL_GMODULEEEPROM:
rc = ethtool_get_module_eeprom(dev, useraddr);
break;
default:
rc = -EOPNOTSUPP;
}
if (dev->ethtool_ops->complete)
dev->ethtool_ops->complete(dev);
if (old_features != dev->features)
netdev_features_change(dev);
return rc;
}