hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/base/regmap/regmap-irq.c

842 lines
21 KiB
C
Raw Normal View History

regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
/*
* regmap based irq_chip
*
* Copyright 2011 Wolfson Microelectronics plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
device.h: cleanup users outside of linux/include (C files) For files that are actively using linux/device.h, make sure that they call it out. This will allow us to clean up some of the implicit uses of linux/device.h within include/* without introducing build regressions. Yes, this was created by "cheating" -- i.e. the headers were cleaned up, and then the fallout was found and fixed, and then the two commits were reordered. This ensures we don't introduce build regressions into the git history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-01-23 00:23:42 +08:00
#include <linux/device.h>
regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'chip->num_regs' will always be none zero from the users, and then if 'chip->num_regs' equals to zero by mistake or other reasons, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just checking the 'chip->num_regs' before calling kzalloc(). This also sorts the header files in alphabetical order at the same time. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19 15:13:45 +08:00
#include <linux/export.h>
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
#include <linux/interrupt.h>
regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'chip->num_regs' will always be none zero from the users, and then if 'chip->num_regs' equals to zero by mistake or other reasons, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just checking the 'chip->num_regs' before calling kzalloc(). This also sorts the header files in alphabetical order at the same time. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19 15:13:45 +08:00
#include <linux/irq.h>
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
#include <linux/irqdomain.h>
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
#include <linux/pm_runtime.h>
regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'chip->num_regs' will always be none zero from the users, and then if 'chip->num_regs' equals to zero by mistake or other reasons, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just checking the 'chip->num_regs' before calling kzalloc(). This also sorts the header files in alphabetical order at the same time. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19 15:13:45 +08:00
#include <linux/regmap.h>
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
#include <linux/slab.h>
#include "internal.h"
struct regmap_irq_chip_data {
struct mutex lock;
regmap: store irq_chip inside regmap_irq_chip_data This will allow later patches to adjust portions of the irq_chip individually for each regmap_irq_chip that is created. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 01:40:47 +08:00
struct irq_chip irq_chip;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
struct regmap *map;
regmap: Constify regmap_irq_chip We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-01 04:01:46 +08:00
const struct regmap_irq_chip *chip;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
int irq_base;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
struct irq_domain *domain;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
int irq;
int wake_count;
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
void *status_reg_buf;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
unsigned int *status_buf;
unsigned int *mask_buf;
unsigned int *mask_buf_def;
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
unsigned int *wake_buf;
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
unsigned int *type_buf;
unsigned int *type_buf_def;
regmap: add support for non contiguous status to regmap-irq In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 21:40:43 +08:00
unsigned int irq_reg_stride;
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
unsigned int type_reg_stride;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
};
static inline const
struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
int irq)
{
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
return &data->chip->irqs[irq];
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
static void regmap_irq_lock(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
mutex_lock(&d->lock);
}
static void regmap_irq_sync_unlock(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
regmap: fix compile errors in regmap-irq.c due to stride changes Commit f01ee60fffa4 ("regmap: implement register striding") caused the compile errors below. Fix them. drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_sync_unlock': drivers/base/regmap/regmap-irq.c:62:12: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c:62:12: note: each undeclared identifier is reported only once for each function it appears in drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_enable': drivers/base/regmap/regmap-irq.c:77:37: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_disable': drivers/base/regmap/regmap-irq.c:85:37: error: 'map' undeclared (first use in this function) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-11 13:37:22 +08:00
struct regmap *map = d->map;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
int i, ret;
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
u32 reg;
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
u32 unmask_offset;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
if (d->chip->runtime_pm) {
ret = pm_runtime_get_sync(map->dev);
if (ret < 0)
dev_err(map->dev, "IRQ sync failed to resume: %d\n",
ret);
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
/*
* If there's been a change in the mask write it back to the
* hardware. We rely on the use of the regmap core cache to
* suppress pointless writes.
*/
for (i = 0; i < d->chip->num_regs; i++) {
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg = d->chip->mask_base +
(i * map->reg_stride * d->irq_reg_stride);
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
if (d->chip->mask_invert) {
regmap: irq: Add mask invert flag for enable register Currently, regmap will write 1 to mask_base to mask an interrupt and write 0 to unmask it. But some chips do not have an interrupt mask register, and only have interrupt enable register. Then we should write 0 to disable interrupt and 1 to enable. So add an mask_invert flag to handle this. If it is not set, behavior is same as previous. If set it to 1, the mask value will be inverted before written to mask_base Signed-off-by: Xiaofan Tian <tianxf@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-30 17:03:35 +08:00
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i], ~d->mask_buf[i]);
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
} else if (d->chip->unmask_base) {
/* set mask with mask_base register */
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i], ~d->mask_buf[i]);
if (ret < 0)
dev_err(d->map->dev,
"Failed to sync unmasks in %x\n",
reg);
unmask_offset = d->chip->unmask_base -
d->chip->mask_base;
/* clear mask with unmask_base register */
ret = regmap_update_bits(d->map,
reg + unmask_offset,
d->mask_buf_def[i],
d->mask_buf[i]);
} else {
regmap: irq: Add mask invert flag for enable register Currently, regmap will write 1 to mask_base to mask an interrupt and write 0 to unmask it. But some chips do not have an interrupt mask register, and only have interrupt enable register. Then we should write 0 to disable interrupt and 1 to enable. So add an mask_invert flag to handle this. If it is not set, behavior is same as previous. If set it to 1, the mask value will be inverted before written to mask_base Signed-off-by: Xiaofan Tian <tianxf@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-30 17:03:35 +08:00
ret = regmap_update_bits(d->map, reg,
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
d->mask_buf_def[i], d->mask_buf[i]);
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
if (ret != 0)
dev_err(d->map->dev, "Failed to sync masks in %x\n",
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg);
regmap: irq: Fix sync of wake statuses to hardware This wasn't implemented but happened to work on test systems due to lack of wake mask inversion support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-05 00:32:54 +08:00
reg = d->chip->wake_base +
(i * map->reg_stride * d->irq_reg_stride);
if (d->wake_buf) {
regmap: irq: Support wake IRQ mask inversion Support devices which have an enable rather than mask register for wake sources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-05 00:35:07 +08:00
if (d->chip->wake_invert)
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
~d->wake_buf[i]);
else
ret = regmap_update_bits(d->map, reg,
d->mask_buf_def[i],
d->wake_buf[i]);
regmap: irq: Fix sync of wake statuses to hardware This wasn't implemented but happened to work on test systems due to lack of wake mask inversion support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-05 00:32:54 +08:00
if (ret != 0)
dev_err(d->map->dev,
"Failed to sync wakes in %x: %d\n",
reg, ret);
}
regmap: irq: clear status when disable irq clear the status bit if the mask register doesn't prevent the chip level irq from being asserted OR in the following sequence, there will be irq storm happens: 1) interrupt is triggered; 2) another thread disables it(the mask bit is set); 3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared), and it's ignored; 4) if the irq is still asserted because of the uncleared status bit, the irq storm happens; Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22 18:44:32 +08:00
if (!d->chip->init_ack_masked)
continue;
/*
regmap: irq: Fixed a typo error Fixed a typo error in the file Signed-off-by: Sriram Dash <dash.sriram@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-27 03:25:13 +08:00
* Ack all the masked interrupts unconditionally,
regmap: irq: clear status when disable irq clear the status bit if the mask register doesn't prevent the chip level irq from being asserted OR in the following sequence, there will be irq storm happens: 1) interrupt is triggered; 2) another thread disables it(the mask bit is set); 3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared), and it's ignored; 4) if the irq is still asserted because of the uncleared status bit, the irq storm happens; Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22 18:44:32 +08:00
* OR if there is masked interrupt which hasn't been Acked,
* it'll be ignored in irq handler, then may introduce irq storm
*/
regmap: irq: Allow using zero value for ack_base In some cases, clear interrupt register may be at address 0. This patch allows to use such configurations by adding additional configuration bit to indicate this. [With doc fix from Levente Kurusa <levex@linux.com> -- broonie] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-15 17:36:51 +08:00
if (d->mask_buf[i] && (d->chip->ack_base || d->chip->use_ack)) {
regmap: irq: clear status when disable irq clear the status bit if the mask register doesn't prevent the chip level irq from being asserted OR in the following sequence, there will be irq storm happens: 1) interrupt is triggered; 2) another thread disables it(the mask bit is set); 3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared), and it's ignored; 4) if the irq is still asserted because of the uncleared status bit, the irq storm happens; Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22 18:44:32 +08:00
reg = d->chip->ack_base +
(i * map->reg_stride * d->irq_reg_stride);
regmap: irq: add ack_invert flag for chips using cleared bits as ack An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:21 +08:00
/* some chips ack by write 0 */
if (d->chip->ack_invert)
ret = regmap_write(map, reg, ~d->mask_buf[i]);
else
ret = regmap_write(map, reg, d->mask_buf[i]);
regmap: irq: clear status when disable irq clear the status bit if the mask register doesn't prevent the chip level irq from being asserted OR in the following sequence, there will be irq storm happens: 1) interrupt is triggered; 2) another thread disables it(the mask bit is set); 3) _Then_ the interrupt thread is not ACKed(the status bit is not cleared), and it's ignored; 4) if the irq is still asserted because of the uncleared status bit, the irq storm happens; Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-22 18:44:32 +08:00
if (ret != 0)
dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
for (i = 0; i < d->chip->num_type_reg; i++) {
if (!d->type_buf_def[i])
continue;
reg = d->chip->type_base +
(i * map->reg_stride * d->type_reg_stride);
if (d->chip->type_invert)
ret = regmap_update_bits(d->map, reg,
d->type_buf_def[i], ~d->type_buf[i]);
else
ret = regmap_update_bits(d->map, reg,
d->type_buf_def[i], d->type_buf[i]);
if (ret != 0)
dev_err(d->map->dev, "Failed to sync type in %x\n",
reg);
}
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
if (d->chip->runtime_pm)
pm_runtime_put(map->dev);
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
/* If we've changed our wakeup count propagate it to the parent */
if (d->wake_count < 0)
for (i = d->wake_count; i < 0; i++)
irq_set_irq_wake(d->irq, 0);
else if (d->wake_count > 0)
for (i = 0; i < d->wake_count; i++)
irq_set_irq_wake(d->irq, 1);
d->wake_count = 0;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
mutex_unlock(&d->lock);
}
static void regmap_irq_enable(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
regmap: fix compile errors in regmap-irq.c due to stride changes Commit f01ee60fffa4 ("regmap: implement register striding") caused the compile errors below. Fix them. drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_sync_unlock': drivers/base/regmap/regmap-irq.c:62:12: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c:62:12: note: each undeclared identifier is reported only once for each function it appears in drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_enable': drivers/base/regmap/regmap-irq.c:77:37: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_disable': drivers/base/regmap/regmap-irq.c:85:37: error: 'map' undeclared (first use in this function) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-11 13:37:22 +08:00
struct regmap *map = d->map;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 03:40:24 +08:00
d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
static void regmap_irq_disable(struct irq_data *data)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
regmap: fix compile errors in regmap-irq.c due to stride changes Commit f01ee60fffa4 ("regmap: implement register striding") caused the compile errors below. Fix them. drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_sync_unlock': drivers/base/regmap/regmap-irq.c:62:12: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c:62:12: note: each undeclared identifier is reported only once for each function it appears in drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_enable': drivers/base/regmap/regmap-irq.c:77:37: error: 'map' undeclared (first use in this function) drivers/base/regmap/regmap-irq.c: In function 'regmap_irq_disable': drivers/base/regmap/regmap-irq.c:85:37: error: 'map' undeclared (first use in this function) Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-11 13:37:22 +08:00
struct regmap *map = d->map;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 03:40:24 +08:00
d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
static int regmap_irq_set_type(struct irq_data *data, unsigned int type)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
int reg = irq_data->type_reg_offset / map->reg_stride;
if (!(irq_data->type_rising_mask | irq_data->type_falling_mask))
return 0;
d->type_buf[reg] &= ~(irq_data->type_falling_mask |
irq_data->type_rising_mask);
switch (type) {
case IRQ_TYPE_EDGE_FALLING:
d->type_buf[reg] |= irq_data->type_falling_mask;
break;
case IRQ_TYPE_EDGE_RISING:
d->type_buf[reg] |= irq_data->type_rising_mask;
break;
case IRQ_TYPE_EDGE_BOTH:
d->type_buf[reg] |= (irq_data->type_falling_mask |
irq_data->type_rising_mask);
break;
default:
return -EINVAL;
}
return 0;
}
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
static int regmap_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
struct regmap *map = d->map;
const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);
if (on) {
regmap: irq: enable wake support by default regmap-irq framework is used vastly by mfd drivers and some of devices like TPS65910, TPS80036 do not support the wake base register to enable wake. Currently wake in regmap-irq only supported if client driver passes the wake base register. As the regmap-irq is mostly used by mfd devices and it is require to have wake support from these devices in most of use cases, enabling wake support by default in regmap-irq. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-19 22:12:28 +08:00
if (d->wake_buf)
d->wake_buf[irq_data->reg_offset / map->reg_stride]
&= ~irq_data->mask;
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
d->wake_count++;
} else {
regmap: irq: enable wake support by default regmap-irq framework is used vastly by mfd drivers and some of devices like TPS65910, TPS80036 do not support the wake base register to enable wake. Currently wake in regmap-irq only supported if client driver passes the wake base register. As the regmap-irq is mostly used by mfd devices and it is require to have wake support from these devices in most of use cases, enabling wake support by default in regmap-irq. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-19 22:12:28 +08:00
if (d->wake_buf)
d->wake_buf[irq_data->reg_offset / map->reg_stride]
|= irq_data->mask;
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
d->wake_count--;
}
return 0;
}
regmap: store irq_chip inside regmap_irq_chip_data This will allow later patches to adjust portions of the irq_chip individually for each regmap_irq_chip that is created. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 01:40:47 +08:00
static const struct irq_chip regmap_irq_chip = {
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
.irq_bus_lock = regmap_irq_lock,
.irq_bus_sync_unlock = regmap_irq_sync_unlock,
.irq_disable = regmap_irq_disable,
.irq_enable = regmap_irq_enable,
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
.irq_set_type = regmap_irq_set_type,
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
.irq_set_wake = regmap_irq_set_wake,
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
};
static irqreturn_t regmap_irq_thread(int irq, void *d)
{
struct regmap_irq_chip_data *data = d;
regmap: Constify regmap_irq_chip We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-01 04:01:46 +08:00
const struct regmap_irq_chip *chip = data->chip;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
struct regmap *map = data->map;
int ret, i;
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 02:50:39 +08:00
bool handled = false;
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
u32 reg;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
if (chip->handle_pre_irq)
chip->handle_pre_irq(chip->irq_drv_data);
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
if (chip->runtime_pm) {
ret = pm_runtime_get_sync(map->dev);
if (ret < 0) {
dev_err(map->dev, "IRQ thread failed to resume: %d\n",
ret);
regmap: irq: call pm_runtime_put in pm_runtime_get_sync failed case Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put(_sync) in such case. Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Li Fei <fei.li@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-28 15:37:11 +08:00
pm_runtime_put(map->dev);
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
goto exit;
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
}
}
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
/*
* Read in the statuses, using a single bulk read if possible
* in order to reduce the I/O overheads.
*/
regmap: Split use_single_rw internally into use_single_read/write use_single_rw currently reflects the capabilities of the connected device. The capabilities of the bus are currently missing for this variable. As there are read only and write only buses we need seperate values for use_single_rw to also reflect tha capabilities of the bus. This patch splits use_single_rw into use_single_read and use_single_write. The initialization is changed to check the configuration for use_single_rw and to check the capabilities of the used bus. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 16:26:42 +08:00
if (!map->use_single_read && map->reg_stride == 1 &&
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
data->irq_reg_stride == 1) {
u8 *buf8 = data->status_reg_buf;
u16 *buf16 = data->status_reg_buf;
u32 *buf32 = data->status_reg_buf;
regmap: add support for non contiguous status to regmap-irq In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 21:40:43 +08:00
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
BUG_ON(!data->status_reg_buf);
ret = regmap_bulk_read(map, chip->status_base,
data->status_reg_buf,
chip->num_regs);
regmap: add support for non contiguous status to regmap-irq In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 21:40:43 +08:00
if (ret != 0) {
dev_err(map->dev, "Failed to read IRQ status: %d\n",
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
ret);
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
goto exit;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
for (i = 0; i < data->chip->num_regs; i++) {
switch (map->format.val_bytes) {
case 1:
data->status_buf[i] = buf8[i];
break;
case 2:
data->status_buf[i] = buf16[i];
break;
case 4:
data->status_buf[i] = buf32[i];
break;
default:
BUG();
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
goto exit;
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
}
}
} else {
for (i = 0; i < data->chip->num_regs; i++) {
ret = regmap_read(map, chip->status_base +
(i * map->reg_stride
* data->irq_reg_stride),
&data->status_buf[i]);
if (ret != 0) {
dev_err(map->dev,
"Failed to read IRQ status: %d\n",
ret);
if (chip->runtime_pm)
pm_runtime_put(map->dev);
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
goto exit;
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
}
}
regmap: irq: Factor register read out of the IRQ parsing loop In preparation for adding back support for block reads. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 21:58:33 +08:00
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: irq: Factor register read out of the IRQ parsing loop In preparation for adding back support for block reads. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 21:58:33 +08:00
/*
* Ignore masked IRQs and ack if we need to; we ack early so
* there is no race between handling and acknowleding the
* interrupt. We assume that typically few of the interrupts
* will fire simultaneously so don't worry about overhead from
* doing a write per register.
*/
for (i = 0; i < data->chip->num_regs; i++) {
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
data->status_buf[i] &= ~data->mask_buf[i];
regmap: irq: Allow using zero value for ack_base In some cases, clear interrupt register may be at address 0. This patch allows to use such configurations by adding additional configuration bit to indicate this. [With doc fix from Levente Kurusa <levex@linux.com> -- broonie] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-15 17:36:51 +08:00
if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg = chip->ack_base +
(i * map->reg_stride * data->irq_reg_stride);
ret = regmap_write(map, reg, data->status_buf[i]);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg, ret);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
}
for (i = 0; i < chip->num_irqs; i++) {
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 03:40:24 +08:00
if (data->status_buf[chip->irqs[i].reg_offset /
map->reg_stride] & chip->irqs[i].mask) {
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
handle_nested_irq(irq_find_mapping(data->domain, i));
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 02:50:39 +08:00
handled = true;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
}
regmap: irq: Enable devices for runtime PM while handling interrupts Some devices need to have a runtime PM reference while handling interrupts to ensure that the register I/O is available. Support this with a flag in the chip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-24 22:41:19 +08:00
if (chip->runtime_pm)
pm_runtime_put(map->dev);
regmap: irq: Add support to call client specific pre/post interrupt service Regmap irq implements the generic interrupt service routine which is common for most of devices. Some devices, like MAX77620, MAX20024 needs the special handling before and after servicing the interrupt as generic. For the example, MAX77620 programming guidelines for interrupt servicing says: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt accordingly. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. The step (2) is implemented in regmap irq as generic routine. For step (1) and (3), add callbacks from regmap irq to client driver to handle chip specific configurations. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-20 23:10:26 +08:00
exit:
if (chip->handle_post_irq)
chip->handle_post_irq(chip->irq_drv_data);
regmap: Report if we actually handled an interrupt in regmap-irq While the IRQ core doesn't currently support shared threaded interrupts that's no reason for drivers not to do their bit and report IRQ_NONE when they don't get an interrupt. This allows the core spurious/wedget interrupt detection support to do its thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29 02:50:39 +08:00
if (handled)
return IRQ_HANDLED;
else
return IRQ_NONE;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
static int regmap_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct regmap_irq_chip_data *data = h->host_data;
irq_set_chip_data(virq, data);
regmap: no need primary handler for nested irq The primary handler will NOT be called if the interrupt nests into another interrupt thread. Remove it to avoid confusing. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-08 18:53:25 +08:00
irq_set_chip(virq, &data->irq_chip);
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
irq_set_nested_thread(virq, 1);
regmap: irq: Enable irq retriggering for nested irqs When nested interrupts are handled with regmap irq framework, we need to mark the interrupts to be resend for pending interrupts on enable_irq. Else the events might be lost for nested irqs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26 23:53:57 +08:00
irq_set_parent(virq, data->irq);
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
irq_set_noprobe(virq);
return 0;
}
regmap: Constify irq_domain_ops The irq_domain_ops are not modified by the driver and the irqdomain core code accepts pointer to a const data. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27 20:52:10 +08:00
static const struct irq_domain_ops regmap_domain_ops = {
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
.map = regmap_irq_map,
.xlate = irq_domain_xlate_twocell,
};
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* regmap_add_irq_chip() - Use standard regmap IRQ controller handling
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @map: The regmap for the device.
* @irq: The IRQ the device uses to signal interrupts.
* @irq_flags: The IRQF_ flags to use for the primary interrupt.
* @irq_base: Allocate at specific IRQ number if irq_base > 0.
* @chip: Configuration for the interrupt controller.
* @data: Runtime data structure for the controller, allocated on success.
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
*
* Returns 0 on success or an errno on failure.
*
* In order for this to be efficient the chip really should use a
* register cache. The chip driver is responsible for restoring the
* register values used by the IRQ controller over suspend and resume.
*/
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
regmap: Constify regmap_irq_chip We should never be modifying it and it lets drivers declare it const. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-01 04:01:46 +08:00
int irq_base, const struct regmap_irq_chip *chip,
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data *d;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
int i;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
int ret = -ENOMEM;
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
u32 reg;
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
u32 unmask_offset;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error. Since we cannot make sure the 'chip->num_regs' will always be none zero from the users, and then if 'chip->num_regs' equals to zero by mistake or other reasons, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just checking the 'chip->num_regs' before calling kzalloc(). This also sorts the header files in alphabetical order at the same time. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-19 15:13:45 +08:00
if (chip->num_regs <= 0)
return -EINVAL;
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 03:40:24 +08:00
for (i = 0; i < chip->num_irqs; i++) {
if (chip->irqs[i].reg_offset % map->reg_stride)
return -EINVAL;
if (chip->irqs[i].reg_offset / map->reg_stride >=
chip->num_regs)
return -EINVAL;
}
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
if (irq_base) {
irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
if (irq_base < 0) {
dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
irq_base);
return irq_base;
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
d = kzalloc(sizeof(*d), GFP_KERNEL);
if (!d)
return -ENOMEM;
regmap: replace kzalloc with kcalloc Replace kzalloc with specialized function kcalloc when the size is a multiplication of : number * sizeof Signed-off-by: lixiubo <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:06:29 +08:00
d->status_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
GFP_KERNEL);
if (!d->status_buf)
goto err_alloc;
regmap: replace kzalloc with kcalloc Replace kzalloc with specialized function kcalloc when the size is a multiplication of : number * sizeof Signed-off-by: lixiubo <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:06:29 +08:00
d->mask_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
GFP_KERNEL);
if (!d->mask_buf)
goto err_alloc;
regmap: replace kzalloc with kcalloc Replace kzalloc with specialized function kcalloc when the size is a multiplication of : number * sizeof Signed-off-by: lixiubo <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:06:29 +08:00
d->mask_buf_def = kcalloc(chip->num_regs, sizeof(unsigned int),
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
GFP_KERNEL);
if (!d->mask_buf_def)
goto err_alloc;
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
if (chip->wake_base) {
regmap: replace kzalloc with kcalloc Replace kzalloc with specialized function kcalloc when the size is a multiplication of : number * sizeof Signed-off-by: lixiubo <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:06:29 +08:00
d->wake_buf = kcalloc(chip->num_regs, sizeof(unsigned int),
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
GFP_KERNEL);
if (!d->wake_buf)
goto err_alloc;
}
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
if (chip->num_type_reg) {
d->type_buf_def = kcalloc(chip->num_type_reg,
sizeof(unsigned int), GFP_KERNEL);
if (!d->type_buf_def)
goto err_alloc;
d->type_buf = kcalloc(chip->num_type_reg, sizeof(unsigned int),
GFP_KERNEL);
if (!d->type_buf)
goto err_alloc;
}
regmap: store irq_chip inside regmap_irq_chip_data This will allow later patches to adjust portions of the irq_chip individually for each regmap_irq_chip that is created. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 01:40:47 +08:00
d->irq_chip = regmap_irq_chip;
regmap: name irq_chip based on regmap_irq_chip's name This is intended to give each irq_chip a useful name, rather than hard- coding them all as "regmap". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 01:40:48 +08:00
d->irq_chip.name = chip->name;
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
d->irq = irq;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
d->map = map;
d->chip = chip;
d->irq_base = irq_base;
regmap: add support for non contiguous status to regmap-irq In some chips the IRQ status registers are not contiguous in the register map but spaced at even spaces. This is an easy case to handle with minor changes. It is assume for this purpose that the stride for status is equal to the stride for mask/ack registers as well. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-14 21:40:43 +08:00
if (chip->irq_reg_stride)
d->irq_reg_stride = chip->irq_reg_stride;
else
d->irq_reg_stride = 1;
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
if (chip->type_reg_stride)
d->type_reg_stride = chip->type_reg_stride;
else
d->type_reg_stride = 1;
regmap: Split use_single_rw internally into use_single_read/write use_single_rw currently reflects the capabilities of the connected device. The capabilities of the bus are currently missing for this variable. As there are read only and write only buses we need seperate values for use_single_rw to also reflect tha capabilities of the bus. This patch splits use_single_rw into use_single_read and use_single_write. The initialization is changed to check the configuration for use_single_rw and to check the capabilities of the used bus. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21 16:26:42 +08:00
if (!map->use_single_read && map->reg_stride == 1 &&
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
d->irq_reg_stride == 1) {
regmap: replace kmalloc with kmalloc_array Replace kmalloc with specialized function kmalloc_array when the size is a multiplication of : number * size Signed-off-by: lixiubo <lixiubo@cmss.chinamobile.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20 18:06:30 +08:00
d->status_reg_buf = kmalloc_array(chip->num_regs,
map->format.val_bytes,
GFP_KERNEL);
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
if (!d->status_reg_buf)
goto err_alloc;
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
mutex_init(&d->lock);
for (i = 0; i < chip->num_irqs; i++)
regmap: implement register striding regmap_config.reg_stride is introduced. All extant register addresses are a multiple of this value. Users of serial-oriented regmap busses will typically set this to 1. Users of the MMIO regmap bus will typically set this based on the value size of their registers, in bytes, so 4 for a 32-bit register. Throughout the regmap code, actual register addresses are used. Wherever the register address is used to index some array of values, the address is divided by the stride to determine the index, or vice-versa. Error- checking is added to all entry-points for register address data to ensure that register addresses actually satisfy the specified stride. The MMIO bus ensures that the specified stride is large enough for the register size. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-10 03:40:24 +08:00
d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride]
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
|= chip->irqs[i].mask;
/* Mask all the interrupts by default */
for (i = 0; i < chip->num_regs; i++) {
d->mask_buf[i] = d->mask_buf_def[i];
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg = chip->mask_base +
(i * map->reg_stride * d->irq_reg_stride);
regmap: irq: Add mask invert flag for enable register Currently, regmap will write 1 to mask_base to mask an interrupt and write 0 to unmask it. But some chips do not have an interrupt mask register, and only have interrupt enable register. Then we should write 0 to disable interrupt and 1 to enable. So add an mask_invert flag to handle this. If it is not set, behavior is same as previous. If set it to 1, the mask value will be inverted before written to mask_base Signed-off-by: Xiaofan Tian <tianxf@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-30 17:03:35 +08:00
if (chip->mask_invert)
ret = regmap_update_bits(map, reg,
d->mask_buf[i], ~d->mask_buf[i]);
regmap: irq: add support for chips who have separate unmask registers Some chips have separate unmask registers from mask registers for some consideration of concurrency SMP write performance. And this patch adds a flag for it. An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:20 +08:00
else if (d->chip->unmask_base) {
unmask_offset = d->chip->unmask_base -
d->chip->mask_base;
ret = regmap_update_bits(d->map,
reg + unmask_offset,
d->mask_buf[i],
d->mask_buf[i]);
} else
regmap: irq: Add mask invert flag for enable register Currently, regmap will write 1 to mask_base to mask an interrupt and write 0 to unmask it. But some chips do not have an interrupt mask register, and only have interrupt enable register. Then we should write 0 to disable interrupt and 1 to enable. So add an mask_invert flag to handle this. If it is not set, behavior is same as previous. If set it to 1, the mask value will be inverted before written to mask_base Signed-off-by: Xiaofan Tian <tianxf@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-30 17:03:35 +08:00
ret = regmap_update_bits(map, reg,
regmap: irq: Only update mask bits when doing initial mask Don't write the full register, it's possible there's bits other than the masks in the same register which we shouldn't be changing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2012-08-02 03:29:14 +08:00
d->mask_buf[i], d->mask_buf[i]);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
if (ret != 0) {
dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
regmap: fix some error messages to take account of irq_reg_stride A number of places in the code were printing error messages that included the address of a register, but were not calculating the register address in the same way as the access to the register. Use a temporary to solve this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-28 03:01:54 +08:00
reg, ret);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
goto err_alloc;
}
regmap: irq: Allow to acknowledge masked interrupts during initialization In case the hardware interrupt mask register does not prevent the chip level irq from being asserted by the corresponding interrupt status bit, already set interrupt bits should to be cleared once after masking them during initialization. Add a flag to let drivers enable this behavior. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 23:15:52 +08:00
if (!chip->init_ack_masked)
continue;
/* Ack masked but set interrupts */
reg = chip->status_base +
(i * map->reg_stride * d->irq_reg_stride);
ret = regmap_read(map, reg, &d->status_buf[i]);
if (ret != 0) {
dev_err(map->dev, "Failed to read IRQ status: %d\n",
ret);
goto err_alloc;
}
regmap: irq: Allow using zero value for ack_base In some cases, clear interrupt register may be at address 0. This patch allows to use such configurations by adding additional configuration bit to indicate this. [With doc fix from Levente Kurusa <levex@linux.com> -- broonie] Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-15 17:36:51 +08:00
if (d->status_buf[i] && (chip->ack_base || chip->use_ack)) {
regmap: irq: Allow to acknowledge masked interrupts during initialization In case the hardware interrupt mask register does not prevent the chip level irq from being asserted by the corresponding interrupt status bit, already set interrupt bits should to be cleared once after masking them during initialization. Add a flag to let drivers enable this behavior. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 23:15:52 +08:00
reg = chip->ack_base +
(i * map->reg_stride * d->irq_reg_stride);
regmap: irq: add ack_invert flag for chips using cleared bits as ack An user will be CSR SiRFSoC ARM chips. Signed-off-by: Guo Zeng <Guo.Zeng@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 13:23:21 +08:00
if (chip->ack_invert)
ret = regmap_write(map, reg,
~(d->status_buf[i] & d->mask_buf[i]));
else
ret = regmap_write(map, reg,
regmap: irq: Allow to acknowledge masked interrupts during initialization In case the hardware interrupt mask register does not prevent the chip level irq from being asserted by the corresponding interrupt status bit, already set interrupt bits should to be cleared once after masking them during initialization. Add a flag to let drivers enable this behavior. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-22 23:15:52 +08:00
d->status_buf[i] & d->mask_buf[i]);
if (ret != 0) {
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
goto err_alloc;
}
}
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: irq: initialize all irqs to wake disabled The kerneldoc for irq_set_irq_wake() says: Enable/disable power management wakeup mode, which is disabled by default. regmap_irq_set_wake() clears bits to enable wake for an interrupt, and sets bits to disable wake. Hence, we should set all bits in wake_buf initially, to mirror the expected disabled state. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 03:57:24 +08:00
/* Wake is disabled by default */
if (d->wake_buf) {
for (i = 0; i < chip->num_regs; i++) {
d->wake_buf[i] = d->mask_buf_def[i];
reg = chip->wake_base +
(i * map->reg_stride * d->irq_reg_stride);
regmap: irq: Support wake IRQ mask inversion Support devices which have an enable rather than mask register for wake sources. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-05 00:35:07 +08:00
if (chip->wake_invert)
ret = regmap_update_bits(map, reg,
d->mask_buf_def[i],
0);
else
ret = regmap_update_bits(map, reg,
d->mask_buf_def[i],
d->wake_buf[i]);
regmap: irq: initialize all irqs to wake disabled The kerneldoc for irq_set_irq_wake() says: Enable/disable power management wakeup mode, which is disabled by default. regmap_irq_set_wake() clears bits to enable wake for an interrupt, and sets bits to disable wake. Hence, we should set all bits in wake_buf initially, to mirror the expected disabled state. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-02 03:57:24 +08:00
if (ret != 0) {
dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
reg, ret);
goto err_alloc;
}
}
}
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
if (chip->num_type_reg) {
for (i = 0; i < chip->num_irqs; i++) {
reg = chip->irqs[i].type_reg_offset / map->reg_stride;
d->type_buf_def[reg] |= chip->irqs[i].type_rising_mask |
chip->irqs[i].type_falling_mask;
}
for (i = 0; i < chip->num_type_reg; ++i) {
if (!d->type_buf_def[i])
continue;
reg = chip->type_base +
(i * map->reg_stride * d->type_reg_stride);
if (chip->type_invert)
ret = regmap_update_bits(map, reg,
d->type_buf_def[i], 0xFF);
else
ret = regmap_update_bits(map, reg,
d->type_buf_def[i], 0x0);
if (ret != 0) {
dev_err(map->dev,
"Failed to set type in 0x%x: %x\n",
reg, ret);
goto err_alloc;
}
}
}
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
if (irq_base)
d->domain = irq_domain_add_legacy(map->dev->of_node,
chip->num_irqs, irq_base, 0,
&regmap_domain_ops, d);
else
d->domain = irq_domain_add_linear(map->dev->of_node,
chip->num_irqs,
&regmap_domain_ops, d);
if (!d->domain) {
dev_err(map->dev, "Failed to create IRQ domain\n");
ret = -ENOMEM;
goto err_alloc;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap-irq: set IRQF_ONESHOT flag to ensure IRQ request Since commit 1c6c69525b40eb76de8adf039409722015927dc3 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. The %irq_flags flag is used to request the threaded IRQ and is also a parameter of the caller. Hence, we cannot be sure that IRQF_ONESHOT is set. This change avoids the potentially missing flag by setting IRQF_ONESHOT when requesting the threaded IRQ. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-11 23:37:57 +08:00
ret = request_threaded_irq(irq, NULL, regmap_irq_thread,
irq_flags | IRQF_ONESHOT,
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
chip->name, d);
if (ret != 0) {
regmap: irq: Clarify error message when we fail to request primary IRQ Display the name for the chip rather than just the primary IRQ so it is clearer what exactly has failed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-19 18:45:04 +08:00
dev_err(map->dev, "Failed to request IRQ %d for %s: %d\n",
irq, chip->name, ret);
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
goto err_domain;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
}
regmap: irq: Set data pointer only on regmap_add_irq_chip success After setting the 'data' pointer (wchich is returned to the caller for freeing later) the regmap_add_irq_chip() could still fail for various reasons (ENOMEM, regmap_read or regmap_write failure). In such case the memory under 'data' was freed in error path and error value was returned but the 'data' variable was not changed. This could lead to errors if the caller passed such 'data' to regmap_del_irq_chip(). The 'data' pointer should be changed atomically from the caller perspective - set it only on regmap_add_irq_chip() success. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-13 16:06:01 +08:00
*data = d;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
return 0;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
err_domain:
/* Should really dispose of the domain but... */
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
err_alloc:
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
kfree(d->type_buf);
kfree(d->type_buf_def);
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
kfree(d->wake_buf);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
kfree(d->mask_buf_def);
kfree(d->mask_buf);
kfree(d->status_buf);
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
kfree(d->status_reg_buf);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
kfree(d);
return ret;
}
EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* regmap_del_irq_chip() - Stop interrupt handling for a regmap IRQ chip
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
*
* @irq: Primary IRQ for the device
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @d: &regmap_irq_chip_data allocated by regmap_add_irq_chip()
regmap: irq: dispose all virtual irq before removing domain It is require to dispose all virtual irq of hwirq on chip created on given irq domain before removing this irq domain. Hence dispose all mapped irqs before deleting the irq domains in regmap_del_irq_chip(); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 20:28:22 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* This function also disposes of all mapped IRQs on the chip.
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
*/
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
{
regmap: irq: dispose all virtual irq before removing domain It is require to dispose all virtual irq of hwirq on chip created on given irq domain before removing this irq domain. Hence dispose all mapped irqs before deleting the irq domains in regmap_del_irq_chip(); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 20:28:22 +08:00
unsigned int virq;
int hwirq;
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
if (!d)
return;
free_irq(irq, d);
regmap: irq: dispose all virtual irq before removing domain It is require to dispose all virtual irq of hwirq on chip created on given irq domain before removing this irq domain. Hence dispose all mapped irqs before deleting the irq domains in regmap_del_irq_chip(); Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09 20:28:22 +08:00
/* Dispose all virtual irq from irq domain before removing it */
for (hwirq = 0; hwirq < d->chip->num_irqs; hwirq++) {
/* Ignore hwirq if holes in the IRQ list */
if (!d->chip->irqs[hwirq].mask)
continue;
/*
* Find the virtual irq of hwirq on chip and if it is
* there then dispose it
*/
virq = irq_find_mapping(d->domain, hwirq);
if (virq)
irq_dispose_mapping(virq);
}
regmap: irq: Remove domain on exit irqdomain now supports removal of domains on exit so we can properly clean up on deletion of a regmap irqchip. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 04:25:48 +08:00
irq_domain_remove(d->domain);
regmap: irq: add support for configuration of trigger type Some of devices supports the trigger level for interrupt like rising/falling edge specially for GPIOs. The interrupt support of such devices may have uses the generic regmap irq framework for implementation. Add support to configure the trigger type device interrupt register via regmap-irq framework. The regmap-irq framework configures the trigger register only if the details of trigger type registers are provided. [Fixed use of terery operator for legibility -- broonie] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-22 20:55:26 +08:00
kfree(d->type_buf);
kfree(d->type_buf_def);
regmap: Implement support for wake IRQs Allow chips to provide a bank of registers for controlling the wake state in a similar fashion to the masks and propagate the wake count to the parent interrupt controller. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:34:03 +08:00
kfree(d->wake_buf);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
kfree(d->mask_buf_def);
kfree(d->mask_buf);
regmap: irq: Use a bulk read for interrupt status where possible If the interrupt status registers are a single block of registers and the chip supports bulk reads then do a single bulk read rather than pay the extra I/O cost. This restores the original behaviour which was lost when support for register striding was added. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 22:27:15 +08:00
kfree(d->status_reg_buf);
regmap: Add a reusable irq_chip for regmap based interrupt controllers There seem to be lots of regmap-using devices with very similar interrupt controllers with a small bank of interrupt registers and mask registers with an interrupt per bit. This won't cover everything but it's a good start. Each chip supplies a base for the status registers, a base for the mask registers, an optional base for writing acknowledgements (which may be the same as the status registers) and an array of bits within each of these register banks which indicate the interrupt. There is an assumption that the bit for each interrupt will be the same in each of the register bank. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-29 05:50:49 +08:00
kfree(d->status_buf);
kfree(d);
}
EXPORT_SYMBOL_GPL(regmap_del_irq_chip);
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
static void devm_regmap_irq_chip_release(struct device *dev, void *res)
{
struct regmap_irq_chip_data *d = *(struct regmap_irq_chip_data **)res;
regmap_del_irq_chip(d->irq, d);
}
static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
{
struct regmap_irq_chip_data **r = res;
if (!r || !*r) {
WARN_ON(!r || !*r);
return 0;
}
return *r == data;
}
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @dev: The device pointer on which irq_chip belongs to.
* @map: The regmap for the device.
* @irq: The IRQ the device uses to signal interrupts
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
* @irq_flags: The IRQF_ flags to use for the primary interrupt.
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @irq_base: Allocate at specific IRQ number if irq_base > 0.
* @chip: Configuration for the interrupt controller.
* @data: Runtime data structure for the controller, allocated on success
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
*
* Returns 0 on success or an errno on failure.
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* The &regmap_irq_chip_data will be automatically released when the device is
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
* unbound.
*/
int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
int irq_flags, int irq_base,
const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data **ptr, *d;
int ret;
ptr = devres_alloc(devm_regmap_irq_chip_release, sizeof(*ptr),
GFP_KERNEL);
if (!ptr)
return -ENOMEM;
ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base,
chip, &d);
if (ret < 0) {
devres_free(ptr);
return ret;
}
*ptr = d;
devres_add(dev, ptr);
*data = d;
return 0;
}
EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* devm_regmap_del_irq_chip() - Resource managed regmap_del_irq_chip()
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
*
* @dev: Device for which which resource was allocated.
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @irq: Primary IRQ for the device.
* @data: &regmap_irq_chip_data allocated by regmap_add_irq_chip().
*
* A resource managed version of regmap_del_irq_chip().
regmap: irq: add devm apis for regmap_{add,del}_irq_chip Add device managed APIs for regmap_add_irq_chip() and regmap_del_irq_chip() so that it can be managed by device framework for freeing it. This helps on following: 1. Maintaining the sequence of resource allocation and deallocation regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq) On free path: regmap_del_irq_chip(d); and then removing the irq registration. On this case, regmap irq is deleted before the irq is free. This force to use normal irq registration. By using devm apis, the sequence can be maintain properly: devm_regmap_add_irq_chip(&d); devm_requested_threaded_irq(virq); and resource deallocation will be done in reverse order by device framework. 2. No need to delete the regmap_irq_chip in error path or remove callback and hence there is less code on this path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10 16:59:50 +08:00
*/
void devm_regmap_del_irq_chip(struct device *dev, int irq,
struct regmap_irq_chip_data *data)
{
int rc;
WARN_ON(irq != data->irq);
rc = devres_release(dev, devm_regmap_irq_chip_release,
devm_regmap_irq_chip_match, data);
if (rc != 0)
WARN_ON(rc);
}
EXPORT_SYMBOL_GPL(devm_regmap_del_irq_chip);
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* regmap_irq_chip_get_base() - Retrieve interrupt base for a regmap IRQ chip
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @data: regmap irq controller to operate on.
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* Useful for drivers to request their own IRQs.
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
*/
int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
{
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
WARN_ON(!data->irq_base);
regmap: Add irq_base accessor to regmap_irq Allows devices to discover their own interrupt without having to remember it themselves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-06 00:10:15 +08:00
return data->irq_base;
}
EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* regmap_irq_get_virq() - Map an interrupt on a chip to a virtual IRQ
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* @data: regmap irq controller to operate on.
* @irq: index of the interrupt requested in the chip IRQs.
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
*
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* Useful for drivers to request their own IRQs.
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
*/
int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
{
regmap: Don't try to map non-existant IRQs If the driver supplied an empty entry in the array of IRQs then return an error rather than trying to do the mapping. This is intended for use with handling chip variants and similar situations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-05 21:29:36 +08:00
/* Handle holes in the IRQ list */
if (!data->chip->irqs[irq].mask)
return -EINVAL;
regmap: Convert regmap_irq to use irq_domain This gets us up to date with the recommended current kernel infrastructure and should transparently give us device tree interrupt bindings for any devices using the framework. If an explicit IRQ mapping is passed in then a legacy interrupt range is created, otherwise a simple linear mapping is used. Previously a mapping was mandatory so existing drivers should not be affected. A function regmap_irq_get_virq() is provided to allow drivers to map individual IRQs which should be used in preference to the existing regmap_irq_chip_get_base() which is only valid if a legacy IRQ range is provided. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-13 17:59:56 +08:00
return irq_create_mapping(data->domain, irq);
}
EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
regmap: irq: Allow users to retrieve the irq_domain This is useful for integration with other subsystems, especially MFD, and provides an alternative API for users that request their own IRQs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 04:45:05 +08:00
/**
regmap: Fixup the kernel-doc comments on functions/structures Most of the kernel-doc comments in regmap don't actually generate correctly. This patch fixes up a few common issues, corrects some typos and adds some missing argument descriptions. The most common issues being using a : after the function name which causes the short description to not render correctly and not separating the long and short descriptions of the function. There are quite a few instances of arguments not being described or given the wrong name as well. This patch doesn't fixup functions/structures that are currently missing descriptions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-12 19:17:39 +08:00
* regmap_irq_get_domain() - Retrieve the irq_domain for the chip
*
* @data: regmap_irq controller to operate on.
regmap: irq: Allow users to retrieve the irq_domain This is useful for integration with other subsystems, especially MFD, and provides an alternative API for users that request their own IRQs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-21 04:45:05 +08:00
*
* Useful for drivers to request their own IRQs and for integration
* with subsystems. For ease of integration NULL is accepted as a
* domain, allowing devices to just call this even if no domain is
* allocated.
*/
struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data)
{
if (data)
return data->domain;
else
return NULL;
}
EXPORT_SYMBOL_GPL(regmap_irq_get_domain);