292 lines
7.6 KiB
C
292 lines
7.6 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
// Copyright (c) 2019 Nuvoton Technology corporation.
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/io.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/of_device.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/reboot.h>
|
||
|
#include <linux/reset-controller.h>
|
||
|
#include <linux/spinlock.h>
|
||
|
#include <linux/mfd/syscon.h>
|
||
|
#include <linux/regmap.h>
|
||
|
#include <linux/of_address.h>
|
||
|
|
||
|
/* NPCM7xx GCR registers */
|
||
|
#define NPCM_MDLR_OFFSET 0x7C
|
||
|
#define NPCM_MDLR_USBD0 BIT(9)
|
||
|
#define NPCM_MDLR_USBD1 BIT(8)
|
||
|
#define NPCM_MDLR_USBD2_4 BIT(21)
|
||
|
#define NPCM_MDLR_USBD5_9 BIT(22)
|
||
|
|
||
|
#define NPCM_USB1PHYCTL_OFFSET 0x140
|
||
|
#define NPCM_USB2PHYCTL_OFFSET 0x144
|
||
|
#define NPCM_USBXPHYCTL_RS BIT(28)
|
||
|
|
||
|
/* NPCM7xx Reset registers */
|
||
|
#define NPCM_SWRSTR 0x14
|
||
|
#define NPCM_SWRST BIT(2)
|
||
|
|
||
|
#define NPCM_IPSRST1 0x20
|
||
|
#define NPCM_IPSRST1_USBD1 BIT(5)
|
||
|
#define NPCM_IPSRST1_USBD2 BIT(8)
|
||
|
#define NPCM_IPSRST1_USBD3 BIT(25)
|
||
|
#define NPCM_IPSRST1_USBD4 BIT(22)
|
||
|
#define NPCM_IPSRST1_USBD5 BIT(23)
|
||
|
#define NPCM_IPSRST1_USBD6 BIT(24)
|
||
|
|
||
|
#define NPCM_IPSRST2 0x24
|
||
|
#define NPCM_IPSRST2_USB_HOST BIT(26)
|
||
|
|
||
|
#define NPCM_IPSRST3 0x34
|
||
|
#define NPCM_IPSRST3_USBD0 BIT(4)
|
||
|
#define NPCM_IPSRST3_USBD7 BIT(5)
|
||
|
#define NPCM_IPSRST3_USBD8 BIT(6)
|
||
|
#define NPCM_IPSRST3_USBD9 BIT(7)
|
||
|
#define NPCM_IPSRST3_USBPHY1 BIT(24)
|
||
|
#define NPCM_IPSRST3_USBPHY2 BIT(25)
|
||
|
|
||
|
#define NPCM_RC_RESETS_PER_REG 32
|
||
|
#define NPCM_MASK_RESETS GENMASK(4, 0)
|
||
|
|
||
|
struct npcm_rc_data {
|
||
|
struct reset_controller_dev rcdev;
|
||
|
struct notifier_block restart_nb;
|
||
|
u32 sw_reset_number;
|
||
|
void __iomem *base;
|
||
|
spinlock_t lock;
|
||
|
};
|
||
|
|
||
|
#define to_rc_data(p) container_of(p, struct npcm_rc_data, rcdev)
|
||
|
|
||
|
static int npcm_rc_restart(struct notifier_block *nb, unsigned long mode,
|
||
|
void *cmd)
|
||
|
{
|
||
|
struct npcm_rc_data *rc = container_of(nb, struct npcm_rc_data,
|
||
|
restart_nb);
|
||
|
|
||
|
writel(NPCM_SWRST << rc->sw_reset_number, rc->base + NPCM_SWRSTR);
|
||
|
mdelay(1000);
|
||
|
|
||
|
pr_emerg("%s: unable to restart system\n", __func__);
|
||
|
|
||
|
return NOTIFY_DONE;
|
||
|
}
|
||
|
|
||
|
static int npcm_rc_setclear_reset(struct reset_controller_dev *rcdev,
|
||
|
unsigned long id, bool set)
|
||
|
{
|
||
|
struct npcm_rc_data *rc = to_rc_data(rcdev);
|
||
|
unsigned int rst_bit = BIT(id & NPCM_MASK_RESETS);
|
||
|
unsigned int ctrl_offset = id >> 8;
|
||
|
unsigned long flags;
|
||
|
u32 stat;
|
||
|
|
||
|
spin_lock_irqsave(&rc->lock, flags);
|
||
|
stat = readl(rc->base + ctrl_offset);
|
||
|
if (set)
|
||
|
writel(stat | rst_bit, rc->base + ctrl_offset);
|
||
|
else
|
||
|
writel(stat & ~rst_bit, rc->base + ctrl_offset);
|
||
|
spin_unlock_irqrestore(&rc->lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int npcm_rc_assert(struct reset_controller_dev *rcdev, unsigned long id)
|
||
|
{
|
||
|
return npcm_rc_setclear_reset(rcdev, id, true);
|
||
|
}
|
||
|
|
||
|
static int npcm_rc_deassert(struct reset_controller_dev *rcdev,
|
||
|
unsigned long id)
|
||
|
{
|
||
|
return npcm_rc_setclear_reset(rcdev, id, false);
|
||
|
}
|
||
|
|
||
|
static int npcm_rc_status(struct reset_controller_dev *rcdev,
|
||
|
unsigned long id)
|
||
|
{
|
||
|
struct npcm_rc_data *rc = to_rc_data(rcdev);
|
||
|
unsigned int rst_bit = BIT(id & NPCM_MASK_RESETS);
|
||
|
unsigned int ctrl_offset = id >> 8;
|
||
|
|
||
|
return (readl(rc->base + ctrl_offset) & rst_bit);
|
||
|
}
|
||
|
|
||
|
static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
|
||
|
const struct of_phandle_args *reset_spec)
|
||
|
{
|
||
|
unsigned int offset, bit;
|
||
|
|
||
|
offset = reset_spec->args[0];
|
||
|
if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
|
||
|
offset != NPCM_IPSRST3) {
|
||
|
dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
bit = reset_spec->args[1];
|
||
|
if (bit >= NPCM_RC_RESETS_PER_REG) {
|
||
|
dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return (offset << 8) | bit;
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id npcm_rc_match[] = {
|
||
|
{ .compatible = "nuvoton,npcm750-reset",
|
||
|
.data = (void *)"nuvoton,npcm750-gcr" },
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* The following procedure should be observed in USB PHY, USB device and
|
||
|
* USB host initialization at BMC boot
|
||
|
*/
|
||
|
static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
|
||
|
{
|
||
|
u32 mdlr, iprst1, iprst2, iprst3;
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct regmap *gcr_regmap;
|
||
|
u32 ipsrst1_bits = 0;
|
||
|
u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
|
||
|
u32 ipsrst3_bits = 0;
|
||
|
const char *gcr_dt;
|
||
|
|
||
|
gcr_dt = (const char *)
|
||
|
of_match_device(dev->driver->of_match_table, dev)->data;
|
||
|
|
||
|
gcr_regmap = syscon_regmap_lookup_by_compatible(gcr_dt);
|
||
|
if (IS_ERR(gcr_regmap)) {
|
||
|
dev_err(&pdev->dev, "Failed to find %s\n", gcr_dt);
|
||
|
return PTR_ERR(gcr_regmap);
|
||
|
}
|
||
|
|
||
|
/* checking which USB device is enabled */
|
||
|
regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
|
||
|
if (!(mdlr & NPCM_MDLR_USBD0))
|
||
|
ipsrst3_bits |= NPCM_IPSRST3_USBD0;
|
||
|
if (!(mdlr & NPCM_MDLR_USBD1))
|
||
|
ipsrst1_bits |= NPCM_IPSRST1_USBD1;
|
||
|
if (!(mdlr & NPCM_MDLR_USBD2_4))
|
||
|
ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
|
||
|
NPCM_IPSRST1_USBD3 |
|
||
|
NPCM_IPSRST1_USBD4);
|
||
|
if (!(mdlr & NPCM_MDLR_USBD0)) {
|
||
|
ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
|
||
|
NPCM_IPSRST1_USBD6);
|
||
|
ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
|
||
|
NPCM_IPSRST3_USBD8 |
|
||
|
NPCM_IPSRST3_USBD9);
|
||
|
}
|
||
|
|
||
|
/* assert reset USB PHY and USB devices */
|
||
|
iprst1 = readl(rc->base + NPCM_IPSRST1);
|
||
|
iprst2 = readl(rc->base + NPCM_IPSRST2);
|
||
|
iprst3 = readl(rc->base + NPCM_IPSRST3);
|
||
|
|
||
|
iprst1 |= ipsrst1_bits;
|
||
|
iprst2 |= ipsrst2_bits;
|
||
|
iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
|
||
|
NPCM_IPSRST3_USBPHY2);
|
||
|
|
||
|
writel(iprst1, rc->base + NPCM_IPSRST1);
|
||
|
writel(iprst2, rc->base + NPCM_IPSRST2);
|
||
|
writel(iprst3, rc->base + NPCM_IPSRST3);
|
||
|
|
||
|
/* clear USB PHY RS bit */
|
||
|
regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
|
||
|
NPCM_USBXPHYCTL_RS, 0);
|
||
|
regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
|
||
|
NPCM_USBXPHYCTL_RS, 0);
|
||
|
|
||
|
/* deassert reset USB PHY */
|
||
|
iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
|
||
|
writel(iprst3, rc->base + NPCM_IPSRST3);
|
||
|
|
||
|
udelay(50);
|
||
|
|
||
|
/* set USB PHY RS bit */
|
||
|
regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
|
||
|
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
|
||
|
regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
|
||
|
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
|
||
|
|
||
|
/* deassert reset USB devices*/
|
||
|
iprst1 &= ~ipsrst1_bits;
|
||
|
iprst2 &= ~ipsrst2_bits;
|
||
|
iprst3 &= ~ipsrst3_bits;
|
||
|
|
||
|
writel(iprst1, rc->base + NPCM_IPSRST1);
|
||
|
writel(iprst2, rc->base + NPCM_IPSRST2);
|
||
|
writel(iprst3, rc->base + NPCM_IPSRST3);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct reset_control_ops npcm_rc_ops = {
|
||
|
.assert = npcm_rc_assert,
|
||
|
.deassert = npcm_rc_deassert,
|
||
|
.status = npcm_rc_status,
|
||
|
};
|
||
|
|
||
|
static int npcm_rc_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct npcm_rc_data *rc;
|
||
|
int ret;
|
||
|
|
||
|
rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL);
|
||
|
if (!rc)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
rc->base = devm_platform_ioremap_resource(pdev, 0);
|
||
|
if (IS_ERR(rc->base))
|
||
|
return PTR_ERR(rc->base);
|
||
|
|
||
|
spin_lock_init(&rc->lock);
|
||
|
|
||
|
rc->rcdev.owner = THIS_MODULE;
|
||
|
rc->rcdev.ops = &npcm_rc_ops;
|
||
|
rc->rcdev.of_node = pdev->dev.of_node;
|
||
|
rc->rcdev.of_reset_n_cells = 2;
|
||
|
rc->rcdev.of_xlate = npcm_reset_xlate;
|
||
|
|
||
|
platform_set_drvdata(pdev, rc);
|
||
|
|
||
|
ret = devm_reset_controller_register(&pdev->dev, &rc->rcdev);
|
||
|
if (ret) {
|
||
|
dev_err(&pdev->dev, "unable to register device\n");
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
if (npcm_usb_reset(pdev, rc))
|
||
|
dev_warn(&pdev->dev, "NPCM USB reset failed, can cause issues with UDC and USB host\n");
|
||
|
|
||
|
if (!of_property_read_u32(pdev->dev.of_node, "nuvoton,sw-reset-number",
|
||
|
&rc->sw_reset_number)) {
|
||
|
if (rc->sw_reset_number && rc->sw_reset_number < 5) {
|
||
|
rc->restart_nb.priority = 192,
|
||
|
rc->restart_nb.notifier_call = npcm_rc_restart,
|
||
|
ret = register_restart_handler(&rc->restart_nb);
|
||
|
if (ret)
|
||
|
dev_warn(&pdev->dev, "failed to register restart handler\n");
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static struct platform_driver npcm_rc_driver = {
|
||
|
.probe = npcm_rc_probe,
|
||
|
.driver = {
|
||
|
.name = "npcm-reset",
|
||
|
.of_match_table = npcm_rc_match,
|
||
|
.suppress_bind_attrs = true,
|
||
|
},
|
||
|
};
|
||
|
builtin_platform_driver(npcm_rc_driver);
|